can: flexcan: add platform data header

new file mode 100644
index 000000000000..533dbe39c659
@@ -0,0 +1,25 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (C) 2021  Angelo Dureghello <[email protected]>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License
+ * version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef _PLAT_FLEXCAN_H
+#define _PLAT_FLEXCAN_H
+
+struct flexcan_platform_data {
+	u32 clock_frequency;
+	u8 clk_src;
+};
+
+#define FLEXCAN_MCF5411X_MB_CNT_MCF	16
+
+#endif /* _PLAT_FLEXCAN_H */

index 8b5af9c83244..036a6ae5f599 100644
@@ -111,7 +111,9 @@ static int __init init_stmark2(void)
 	__raw_writeb(0x00, MCFGPIO_PAR_BE);
 	__raw_writeb(0x00, MCFGPIO_PAR_FBCTL);
 	__raw_writeb(0x00, MCFGPIO_PAR_CS);
-	__raw_writeb(0x00, MCFGPIO_PAR_CANI2C);
+
+	/* CAN pads */
+	__raw_writeb(0x50, MCFGPIO_PAR_CANI2C);
 
 	platform_add_devices(stmark2_devices, ARRAY_SIZE(stmark2_devices));
 

@@ -121,4 +123,4 @@ static int __init init_stmark2(void)
 	return 0;
 }
 
-late_initcall(init_stmark2);
+device_initcall(init_stmark2);

index 59f7dfe50a4d..5f7effbf7c60 100644
@@ -23,6 +23,7 @@
 #include <linux/platform_data/edma.h>
 #include <linux/platform_data/dma-mcf-edma.h>
 #include <linux/platform_data/mmc-esdhc-mcf.h>
+#include <linux/can/platform/flexcan.h>
 
 /*
  *	All current ColdFire parts contain from 2, 3, 4 or 10 UARTS.

@@ -581,6 +582,44 @@ static struct platform_device mcf_esdhc = {
 };
 #endif /* MCFSDHC_BASE */
 
+#if IS_ENABLED(CONFIG_CAN)
+static struct flexcan_platform_data mcf5441x_flexcan_info = {
+	.clk_src = 1,
+	.clock_frequency = 120000000,
+};
+
+static struct resource mcf5441x_flexcan0_resource[] = {
+	{
+		.start = MCFFLEXCAN_BASE0,
+		.end = MCFFLEXCAN_BASE0 + MCFFLEXCAN_SIZE,
+		.flags = IORESOURCE_MEM,
+	},
+	{
+		.start = MCF_IRQ_IFL0,
+		.end = MCF_IRQ_IFL0,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = MCF_IRQ_BOFF0,
+		.end = MCF_IRQ_BOFF0,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = MCF_IRQ_ERR0,
+		.end = MCF_IRQ_ERR0,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device mcf_flexcan0 = {
+	.name = "flexcan-mcf5441x",
+	.id = 0,
+	.num_resources = ARRAY_SIZE(mcf5441x_flexcan0_resource),
+	.resource = mcf5441x_flexcan0_resource,
+	.dev.platform_data = &mcf5441x_flexcan_info,
+};
+#endif /* IS_ENABLED(CONFIG_CAN) */
+
 static struct platform_device *mcf_devices[] __initdata = {
 	&mcf_uart,
 #if IS_ENABLED(CONFIG_FEC)

@@ -616,6 +655,9 @@ static struct platform_device *mcf_devices[] __initdata = {
 #ifdef MCFSDHC_BASE
 	&mcf_esdhc,
 #endif
+#if IS_ENABLED(CONFIG_CAN)
+	&mcf_flexcan0,
+#endif
 };
 
 /*

index 1e5259a652d1..18b152edb69c 100644
@@ -18,8 +18,8 @@
 #include <asm/mcfclk.h>
 
 DEFINE_CLK(0, "flexbus", 2, MCF_CLK);
-DEFINE_CLK(0, "mcfcan.0", 8, MCF_CLK);
-DEFINE_CLK(0, "mcfcan.1", 9, MCF_CLK);
+DEFINE_CLK(0, "flexcan.0", 8, MCF_CLK);
+DEFINE_CLK(0, "flexcan.1", 9, MCF_CLK);
 DEFINE_CLK(0, "imx1-i2c.1", 14, MCF_CLK);
 DEFINE_CLK(0, "mcfdspi.1", 15, MCF_CLK);
 DEFINE_CLK(0, "edma", 17, MCF_CLK);

@@ -146,6 +146,8 @@ struct clk *mcf_clks[] = {
 
 static struct clk * const enable_clks[] __initconst = {
 	/* make sure these clocks are enabled */
+	&__clk_0_8, /* flexcan.0 */
+	&__clk_0_9, /* flexcan.1 */
 	&__clk_0_15, /* dspi.1 */
 	&__clk_0_17, /* eDMA */
 	&__clk_0_18, /* intc0 */

@@ -166,8 +168,6 @@ static struct clk * const enable_clks[] __initconst = {
 	&__clk_1_37, /* gpio */
 };
 static struct clk * const disable_clks[] __initconst = {
-	&__clk_0_8, /* can.0 */
-	&__clk_0_9, /* can.1 */
 	&__clk_0_14, /* i2c.1 */
 	&__clk_0_22, /* i2c.0 */
 	&__clk_0_23, /* dspi.0 */

index e091e36d3464..f48cf63bd782 100644
@@ -73,6 +73,12 @@
 #define MCFINT0_FECENTC1	55
 
 /* on interrupt controller 1 */
+#define MCFINT1_FLEXCAN0_IFL	0
+#define MCFINT1_FLEXCAN0_BOFF	1
+#define MCFINT1_FLEXCAN0_ERR	3
+#define MCFINT1_FLEXCAN1_IFL	4
+#define MCFINT1_FLEXCAN1_BOFF	5
+#define MCFINT1_FLEXCAN1_ERR	7
 #define MCFINT1_UART4		48
 #define MCFINT1_UART5		49
 #define MCFINT1_UART6		50

@@ -314,4 +320,17 @@
 #define MCF_IRQ_SDHC		(MCFINT2_VECBASE + MCFINT2_SDHC)
 #define MCFSDHC_CLK		(MCFSDHC_BASE + 0x2c)
 
+/*
+ * Flexcan module
+ */
+#define MCFFLEXCAN_BASE0	0xfc020000
+#define MCFFLEXCAN_BASE1	0xfc024000
+#define MCFFLEXCAN_SIZE		0x4000
+#define MCF_IRQ_IFL0		(MCFINT1_VECBASE + MCFINT1_FLEXCAN0_IFL)
+#define MCF_IRQ_BOFF0		(MCFINT1_VECBASE + MCFINT1_FLEXCAN0_BOFF)
+#define MCF_IRQ_ERR0		(MCFINT1_VECBASE + MCFINT1_FLEXCAN0_ERR)
+#define MCF_IRQ_IFL1		(MCFINT1_VECBASE + MCFINT1_FLEXCAN1_IFL)
+#define MCF_IRQ_BOFF1		(MCFINT1_VECBASE + MCFINT1_FLEXCAN1_BOFF)
+#define MCF_IRQ_ERR1		(MCFINT1_VECBASE + MCFINT1_FLEXCAN1_ERR)
+
 #endif /* m5441xsim_h */

index 57f3635ad8d7..891baf2c1e22 100644
@@ -28,6 +28,7 @@
 #include <linux/of_device.h>
 #include <linux/pinctrl/consumer.h>
 #include <linux/platform_device.h>
+#include <linux/can/platform/flexcan.h>
 #include <linux/pm_runtime.h>
 #include <linux/regmap.h>
 #include <linux/regulator/consumer.h>

@@ -208,18 +209,19 @@
 /* FLEXCAN hardware feature flags
  *
  * Below is some version info we got:
- *    SOC   Version   IP-Version  Glitch- [TR]WRN_INT IRQ Err Memory err RTR rece-   FD Mode
+ *    SOC   Version   IP-Version  Glitch- [TR]WRN_INT IRQ Err Memory err RTR rece-   FD Mode     MB
  *                                Filter? connected?  Passive detection  ption in MB Supported?
- *   MX25  FlexCAN2  03.00.00.00     no        no        no       no        no           no
- *   MX28  FlexCAN2  03.00.04.00    yes       yes        no       no        no           no
- *   MX35  FlexCAN2  03.00.00.00     no        no        no       no        no           no
- *   MX53  FlexCAN2  03.00.00.00    yes        no        no       no        no           no
- *   MX6s  FlexCAN3  10.00.12.00    yes       yes        no       no       yes           no
- *   MX8QM FlexCAN3  03.00.23.00    yes       yes        no       no       yes          yes
- *   MX8MP FlexCAN3  03.00.17.01    yes       yes        no      yes       yes          yes
- *   VF610 FlexCAN3  ?               no       yes        no      yes       yes?          no
- * LS1021A FlexCAN2  03.00.04.00     no       yes        no       no       yes           no
- * LX2160A FlexCAN3  03.00.23.00     no       yes        no      yes       yes          yes
+ *   MX25   FlexCAN2  03.00.00.00     no        no        no       no        no           no     64
+ *   MX28   FlexCAN2  03.00.04.00    yes       yes        no       no        no           no     64
+ *   MX35   FlexCAN2  03.00.00.00     no        no        no       no        no           no     64
+ *   MX53   FlexCAN2  03.00.00.00    yes        no        no       no        no           no     64
+ *   MX6s   FlexCAN3  10.00.12.00    yes       yes        no       no       yes           no     64
+ *   MX8QM  FlexCAN3  03.00.23.00    yes       yes        no       no       yes          yes     64
+ *   MX8MP  FlexCAN3  03.00.17.01    yes       yes        no      yes       yes          yes     64
+ *   VF610  FlexCAN3  ?               no       yes        no      yes       yes?          no     64
+ * LS1021A  FlexCAN2  03.00.04.00     no       yes        no       no       yes           no     64
+ * LX2160A  FlexCAN3  03.00.23.00     no       yes        no      yes       yes          yes     64
+ * MCF5441X FlexCAN2  ?               no       yes        no       no       yes           no     16
  *
  * Some SOCs do not have the RX_WARN & TX_WARN interrupt line connected.
  */

@@ -246,6 +248,10 @@
 #define FLEXCAN_QUIRK_SUPPORT_ECC BIT(10)
 /* Setup stop mode with SCU firmware to support wakeup */
 #define FLEXCAN_QUIRK_SETUP_STOP_MODE_SCFW BIT(11)
+/* Setup 3 separate interrupts, main, boff and err */
+#define FLEXCAN_QUIRK_NR_IRQ_3 BIT(12)
+/* Setup 16 mailboxes */
+#define FLEXCAN_QUIRK_NR_MB_16 BIT(13)
 
 /* Structure of the message buffer */
 struct flexcan_mb {

@@ -363,6 +369,9 @@ struct flexcan_priv {
 	struct regulator *reg_xceiver;
 	struct flexcan_stop_mode stm;
 
+	int irq_boff;
+	int irq_err;
+
 	/* IPC handle when setup stop mode by System Controller firmware(scfw) */
 	struct imx_sc_ipc *sc_ipc_handle;
 

@@ -371,6 +380,11 @@ struct flexcan_priv {
 	void (*write)(u32 val, void __iomem *addr);
 };
 
+static const struct flexcan_devtype_data fsl_mcf5441x_devtype_data = {
+	.quirks = FLEXCAN_QUIRK_BROKEN_PERR_STATE |
+		FLEXCAN_QUIRK_NR_IRQ_3 | FLEXCAN_QUIRK_NR_MB_16,
+};
+
 static const struct flexcan_devtype_data fsl_p1010_devtype_data = {
 	.quirks = FLEXCAN_QUIRK_BROKEN_WERR_STATE |
 		FLEXCAN_QUIRK_BROKEN_PERR_STATE |

@@ -637,13 +651,17 @@ static int flexcan_clks_enable(const struct flexcan_priv *priv)
 {
 	int err;
 
-	err = clk_prepare_enable(priv->clk_ipg);
-	if (err)
-		return err;
+	if (priv->clk_ipg) {
+		err = clk_prepare_enable(priv->clk_ipg);
+		if (err)
+			return err;
+	}
 
-	err = clk_prepare_enable(priv->clk_per);
-	if (err)
-		clk_disable_unprepare(priv->clk_ipg);
+	if (priv->clk_per) {
+		err = clk_prepare_enable(priv->clk_per);
+		if (err)
+			clk_disable_unprepare(priv->clk_ipg);
+	}
 
 	return err;
 }

@@ -1401,8 +1419,12 @@ static int flexcan_rx_offload_setup(struct net_device *dev)
 		priv->mb_size = sizeof(struct flexcan_mb) + CANFD_MAX_DLEN;
 	else
 		priv->mb_size = sizeof(struct flexcan_mb) + CAN_MAX_DLEN;
-	priv->mb_count = (sizeof(priv->regs->mb[0]) / priv->mb_size) +
-			 (sizeof(priv->regs->mb[1]) / priv->mb_size);
+
+	if (priv->devtype_data->quirks & FLEXCAN_QUIRK_NR_MB_16)
+		priv->mb_count = FLEXCAN_MCF5411X_MB_CNT_MCF;
+	else
+		priv->mb_count = (sizeof(priv->regs->mb[0]) / priv->mb_size) +
+				 (sizeof(priv->regs->mb[1]) / priv->mb_size);
 
 	if (priv->devtype_data->quirks & FLEXCAN_QUIRK_USE_OFF_TIMESTAMP)
 		priv->tx_mb_reserved =

@@ -1774,6 +1796,18 @@ static int flexcan_open(struct net_device *dev)
 	if (err)
 		goto out_can_rx_offload_disable;
 
+	if (priv->devtype_data->quirks & FLEXCAN_QUIRK_NR_IRQ_3) {
+		err = request_irq(priv->irq_boff,
+				  flexcan_irq, IRQF_SHARED, dev->name, dev);
+		if (err)
+			goto out_free_irq;
+
+		err = request_irq(priv->irq_err,
+				  flexcan_irq, IRQF_SHARED, dev->name, dev);
+		if (err)
+			goto out_free_irq_boff;
+	}
+
 	flexcan_chip_interrupts_enable(dev);
 
 	can_led_event(dev, CAN_LED_EVENT_OPEN);

@@ -1782,6 +1816,10 @@ static int flexcan_open(struct net_device *dev)
 
 	return 0;
 
+ out_free_irq_boff:
+	free_irq(priv->irq_boff, dev);
+ out_free_irq:
+	free_irq(dev->irq, dev);
  out_can_rx_offload_disable:
 	can_rx_offload_disable(&priv->offload);
 	flexcan_chip_stop(dev);

@@ -1803,6 +1841,12 @@ static int flexcan_close(struct net_device *dev)
 
 	netif_stop_queue(dev);
 	flexcan_chip_interrupts_disable(dev);
+
+	if (priv->devtype_data->quirks & FLEXCAN_QUIRK_NR_IRQ_3) {
+		free_irq(priv->irq_err, dev);
+		free_irq(priv->irq_boff, dev);
+	}
+
 	free_irq(dev->irq, dev);
 	can_rx_offload_disable(&priv->offload);
 	flexcan_chip_stop_disable_on_error(dev);

@@ -2039,14 +2083,26 @@ static const struct of_device_id flexcan_of_match[] = {
 };
 MODULE_DEVICE_TABLE(of, flexcan_of_match);
 
+static const struct platform_device_id flexcan_id_table[] = {
+	{
+		.name = "flexcan-mcf5441x",
+		.driver_data = (kernel_ulong_t)&fsl_mcf5441x_devtype_data,
+	}, {
+		/* sentinel */
+	},
+};
+MODULE_DEVICE_TABLE(platform, flexcan_id_table);
+
 static int flexcan_probe(struct platform_device *pdev)
 {
+	const struct of_device_id *of_id;
 	const struct flexcan_devtype_data *devtype_data;
 	struct net_device *dev;
 	struct flexcan_priv *priv;
 	struct regulator *reg_xceiver;
 	struct clk *clk_ipg = NULL, *clk_per = NULL;
 	struct flexcan_regs __iomem *regs;
+	struct flexcan_platform_data *pdata;
 	int err, irq;
 	u8 clk_src = 1;
 	u32 clock_freq = 0;

@@ -2064,6 +2120,12 @@ static int flexcan_probe(struct platform_device *pdev)
 				     "clock-frequency", &clock_freq);
 		of_property_read_u8(pdev->dev.of_node,
 				    "fsl,clk-source", &clk_src);
+	} else {
+		pdata = dev_get_platdata(&pdev->dev);
+		if (pdata) {
+			clock_freq = pdata->clock_frequency;
+			clk_src = pdata->clk_src;
+		}
 	}
 
 	if (!clock_freq) {

@@ -2089,7 +2151,14 @@ static int flexcan_probe(struct platform_device *pdev)
 	if (IS_ERR(regs))
 		return PTR_ERR(regs);
 
-	devtype_data = of_device_get_match_data(&pdev->dev);
+	of_id = of_match_device(flexcan_of_match, &pdev->dev);
+	if (of_id)
+		devtype_data = of_id->data;
+	else if (platform_get_device_id(pdev)->driver_data)
+		devtype_data = (struct flexcan_devtype_data *)
+			platform_get_device_id(pdev)->driver_data;
+	else
+		return -ENODEV;
 
 	if ((devtype_data->quirks & FLEXCAN_QUIRK_SUPPORT_FD) &&
 	    !(devtype_data->quirks & FLEXCAN_QUIRK_USE_OFF_TIMESTAMP)) {

@@ -2133,6 +2202,15 @@ static int flexcan_probe(struct platform_device *pdev)
 	priv->devtype_data = devtype_data;
 	priv->reg_xceiver = reg_xceiver;
 
+	if (devtype_data->quirks & FLEXCAN_QUIRK_NR_IRQ_3) {
+		priv->irq_boff = platform_get_irq(pdev, 1);
+		if (priv->irq_boff <= 0)
+			return -ENODEV;
+		priv->irq_err = platform_get_irq(pdev, 2);
+		if (priv->irq_err <= 0)
+			return -ENODEV;
+	}
+
 	if (priv->devtype_data->quirks & FLEXCAN_QUIRK_SUPPORT_FD) {
 		priv->can.ctrlmode_supported |= CAN_CTRLMODE_FD |
 			CAN_CTRLMODE_FD_NON_ISO;

@@ -2322,6 +2400,7 @@ static struct platform_driver flexcan_driver = {
 	},
 	.probe = flexcan_probe,
 	.remove = flexcan_remove,
+	.id_table = flexcan_id_table,
 };
 
 module_platform_driver(flexcan_driver);