dt-bindings: usb: qcom,pmic-typec: update example to follow connector schema
Subsystems (4)
PATCH v3 1/1 dt-bindings: usb: qcom,pmic-typec: update example to follow connector schema
Update Qualcomm PMIC Type-C examples to follow the USB-C connector schema. The USB-C connector should have three ports (USB HS @0, SSTX/RX @1 and SBU @2 lanes). Reorder ports accordingly and add SBU port connected to the SBU mux (e.g. FSA4480).
---
Update examples to follow usb-c-connector schema wrt. ports definitions.
---
Changes in v3:
- Dropped the Fixes tag (Greg, Conor)
- Link to v2: https://lore.kernel.org/r/[email protected]
Changes in v2:
- Dropped patch removing the role-switching port. We do not use it, but
it can become useful by other designs.
- Link to v1: https://lore.kernel.org/r/[email protected]
--- .../devicetree/bindings/usb/qcom,pmic-typec.yaml | 34 +++++++++++++++++----- 1 file changed, 26 insertions(+), 8 deletions(-)
Documentation/devicetree/bindings/usb/qcom,pmic-typec.yaml +26 -8
@@ -193,15 +193,22 @@ examples: port@0 { reg = <0>; - pmic_typec_mux_out: endpoint { - remote-endpoint = <&usb_phy_typec_mux_in>; + pmic_typec_hs_in: endpoint { + remote-endpoint = <&usb_hs_out>; }; }; port@1 { reg = <1>; - pmic_typec_role_switch_out: endpoint { - remote-endpoint = <&usb_role_switch_in>; + pmic_typec_ss_in: endpoint { + remote-endpoint = <&usb_phy_typec_ss_out>; + }; + }; + + port@2 { + reg = <2>; + pmic_typec_sbu: endpoint { + remote-endpoint = <&usb_mux_sbu>; }; }; };
@@ -213,8 +220,8 @@ examples: dr_mode = "otg"; usb-role-switch; port { - usb_role_switch_in: endpoint { - remote-endpoint = <&pmic_typec_role_switch_out>; + usb_hs_out: endpoint { + remote-endpoint = <&pmic_typec_hs_in>; }; }; };
@@ -222,8 +229,19 @@ examples: usb-phy { orientation-switch; port { - usb_phy_typec_mux_in: endpoint { - remote-endpoint = <&pmic_typec_mux_out>; + usb_phy_typec_ss_out: endpoint { + remote-endpoint = <&pmic_typec_ss_in>; + }; + }; + }; + + usb-mux { + orientation-switch; + mode-switch; + + port { + usb_mux_sbu: endpoint { + remote-endpoint = <&pmic_typec_sbu>; }; }; };
---
base-commit: 4eab358930711bbeb85bf5ee267d0d42d3394c2c
change-id: 20240322-typec-fix-example-3d9b1eca853d
Best regards,
Signature · 1 line
Dmitry Baryshkov <[email protected]>
Quoted 9 lines · Dmitry Baryshkov
Update Qualcomm PMIC Type-C examples to follow the USB-C connector schema. The USB-C connector should have three ports (USB HS @0, SSTX/RX @1 and SBU @2 lanes). Reorder ports accordingly and add SBU port connected to the SBU mux (e.g. FSA4480).
Reported-by Luca Weiss <[email protected]>Acked-by Konrad Dybcio <[email protected]>Signed-off-by Dmitry Baryshkov <[email protected]>---
Best regards,
Krzysztof