Skip to contentSkip to conversation

Add Alder Lake PCH-S support to PMC core driver

PATCH Superseded Gayatri Kammela 3 participants 11 messages Jul 31, 2021 – Aug 16, 2021

Subsystems (2)

v6 of 7 Superseded Latest is v7 →

lore
Share & tools
lore
#0 lore raw

v6 cover Add Alder Lake PCH-S support to PMC core driver

Hi,
The patch series move intel_pmc_core* files to pmc subfolder as well as add Alder Lake PCH-S support to PMC core driver.

Patch 1: Move intel_pmc_core* files to pmc subfolder Patch 2: Add Alderlake support to pmc core driver
Patch 3: Add Latency Tolerance Reporting (LTR) support to Alder Lake Patch 4: Add Alder Lake low power mode support for pmc core Patch 5: Add GBE Package C10 fix for Alder Lake

Changes since v1:
1) Add patch 1 to v2 i.e., Move intel_pmc_core* files to pmc subfolder.
2) Modify commit message for patch 2.

Changes since v2:
1) Dropped intel_pmc_ prefix from the file names.

Changes since v3:
1) Fixed an error reported by lkp.

Changes since v4:
1) Updated MAINTAINERS

Changes since v5:
1) Fixed an module name error reported by Chao Qin

David E. Box (1):
platform/x86/intel: pmc/core: Add GBE Package C10 fix for Alder Lake
PCH

Gayatri Kammela (4):
platform/x86/intel: intel_pmc_core: Move intel_pmc_core* files to pmc
subfolder
platform/x86/intel: pmc/core: Add Alderlake support to pmc core driver platform/x86/intel: pmc/core: Add Latency Tolerance Reporting (LTR)
support to Alder Lake
platform/x86/intel: pmc/core: Add Alder Lake low power mode support
for pmc core

 MAINTAINERS                                   |   2 +-
 drivers/platform/x86/Kconfig                  |  21 --
 drivers/platform/x86/Makefile                 |   1 -
 drivers/platform/x86/intel/Kconfig            |   1 +
 drivers/platform/x86/intel/Makefile           |   1 +
 drivers/platform/x86/intel/pmc/Kconfig        |  22 ++
 drivers/platform/x86/intel/pmc/Makefile       |   6 +
 .../{intel_pmc_core.c => intel/pmc/core.c}    | 309 +++++++++++++++++-
 .../{intel_pmc_core.h => intel/pmc/core.h}    |  17 +
 .../pmc/pltdrv.c}                             |   0
 10 files changed, 353 insertions(+), 27 deletions(-)
 create mode 100644 drivers/platform/x86/intel/pmc/Kconfig
 create mode 100644 drivers/platform/x86/intel/pmc/Makefile
 rename drivers/platform/x86/{intel_pmc_core.c => intel/pmc/core.c} (85%)
 rename drivers/platform/x86/{intel_pmc_core.h => intel/pmc/core.h} (95%)
 rename drivers/platform/x86/{intel_pmc_core_pltdrv.c => intel/pmc/pltdrv.c} (100%)
Cc Srinivas Pandruvada <[email protected]>
Cc Andy Shevchenko <[email protected]>
Cc David Box <[email protected]>
Cc You-Sheng Yang <[email protected]>
Cc Hans de Goede <[email protected]>
Cc Rajneesh Bhardwaj <[email protected]>
Cc Chao Qin <[email protected]>

base-commit: c7d102232649226a69dddd58a4942cf13cff4f7c

Signature · 1 line
2.25.1
#1 lore raw

PATCH v6 1/5 platform/x86/intel: intel_pmc_core: Move intel_pmc_core* files to pmc subfolder

As part of collecting Intel x86 specific drivers in their own folder, move intel_pmc_core* files to its own subfolder there.

---
 MAINTAINERS                                   |  2 +-
 drivers/platform/x86/Kconfig                  | 21 ------------------
 drivers/platform/x86/Makefile                 |  1 -
 drivers/platform/x86/intel/Kconfig            |  1 +
 drivers/platform/x86/intel/Makefile           |  1 +
 drivers/platform/x86/intel/pmc/Kconfig        | 22 +++++++++++++++++++
 drivers/platform/x86/intel/pmc/Makefile       |  6 +++++
 .../{intel_pmc_core.c => intel/pmc/core.c}    |  2 +-
 .../{intel_pmc_core.h => intel/pmc/core.h}    |  0
 .../pmc/pltdrv.c}                             |  0
 10 files changed, 32 insertions(+), 24 deletions(-)
 create mode 100644 drivers/platform/x86/intel/pmc/Kconfig
 create mode 100644 drivers/platform/x86/intel/pmc/Makefile
 rename drivers/platform/x86/{intel_pmc_core.c => intel/pmc/core.c} (99%)
 rename drivers/platform/x86/{intel_pmc_core.h => intel/pmc/core.h} (100%)
 rename drivers/platform/x86/{intel_pmc_core_pltdrv.c => intel/pmc/pltdrv.c} (100%)
MAINTAINERS +1 -1
index c9467d2839f5..0dcf765682fc 100644
@@ -9477,7 +9477,7 @@ M:	David E Box <[email protected]>
 L:	[email protected]
 S:	Maintained
 F:	Documentation/ABI/testing/sysfs-platform-intel-pmc
-F:	drivers/platform/x86/intel_pmc_core*
+F:	drivers/platform/x86/intel/pmc/core*
 
 INTEL PMIC GPIO DRIVERS
 M:	Andy Shevchenko <[email protected]>
drivers/platform/x86/Kconfig +0 -21
index 7d385c3b2239..cae72922f448 100644
@@ -1184,27 +1184,6 @@ config INTEL_MRFLD_PWRBTN
 	  To compile this driver as a module, choose M here: the module
 	  will be called intel_mrfld_pwrbtn.
 
-config INTEL_PMC_CORE
-	tristate "Intel PMC Core driver"
-	depends on PCI
-	depends on ACPI
-	help
-	  The Intel Platform Controller Hub for Intel Core SoCs provides access
-	  to Power Management Controller registers via various interfaces. This
-	  driver can utilize debugging capabilities and supported features as
-	  exposed by the Power Management Controller. It also may perform some
-	  tasks in the PMC in order to enable transition into the SLPS0 state.
-	  It should be selected on all Intel platforms supported by the driver.
-
-	  Supported features:
-		- SLP_S0_RESIDENCY counter
-		- PCH IP Power Gating status
-		- LTR Ignore / LTR Show
-		- MPHY/PLL gating status (Sunrisepoint PCH only)
-		- SLPS0 Debug registers (Cannonlake/Icelake PCH)
-		- Low Power Mode registers (Tigerlake and beyond)
-		- PMC quirks as needed to enable SLPS0/S0ix
-
 config INTEL_PMT_CLASS
 	tristate
 	help
drivers/platform/x86/Makefile +0 -1
index 7ee369aab10d..43d36f8c36f1 100644
@@ -128,7 +128,6 @@ obj-$(CONFIG_INTEL_UNCORE_FREQ_CONTROL)		+= intel-uncore-frequency.o
 obj-$(CONFIG_INTEL_BXTWC_PMIC_TMU)	+= intel_bxtwc_tmu.o
 obj-$(CONFIG_INTEL_CHTDC_TI_PWRBTN)	+= intel_chtdc_ti_pwrbtn.o
 obj-$(CONFIG_INTEL_MRFLD_PWRBTN)	+= intel_mrfld_pwrbtn.o
-obj-$(CONFIG_INTEL_PMC_CORE)		+= intel_pmc_core.o intel_pmc_core_pltdrv.o
 obj-$(CONFIG_INTEL_PMT_CLASS)		+= intel_pmt_class.o
 obj-$(CONFIG_INTEL_PMT_TELEMETRY)	+= intel_pmt_telemetry.o
 obj-$(CONFIG_INTEL_PMT_CRASHLOG)	+= intel_pmt_crashlog.o
drivers/platform/x86/intel/Kconfig +1 -0
index f2eef337eb98..8ca021785f67 100644
@@ -18,5 +18,6 @@ if X86_PLATFORM_DRIVERS_INTEL
 
 source "drivers/platform/x86/intel/int33fe/Kconfig"
 source "drivers/platform/x86/intel/int3472/Kconfig"
+source "drivers/platform/x86/intel/pmc/Kconfig"
 
 endif # X86_PLATFORM_DRIVERS_INTEL
drivers/platform/x86/intel/Makefile +1 -0
index 0653055942d5..49962f4dfdec 100644
@@ -6,3 +6,4 @@
 
 obj-$(CONFIG_INTEL_CHT_INT33FE)		+= int33fe/
 obj-$(CONFIG_INTEL_SKL_INT3472)		+= int3472/
+obj-$(CONFIG_INTEL_PMC_CORE)		+= pmc/
drivers/platform/x86/intel/pmc/Kconfig new file +22 -0
new file mode 100644
index 000000000000..b4c955a35674
@@ -0,0 +1,22 @@
+# SPDX-License-Identifier: GPL-2.0-only
+
+config INTEL_PMC_CORE
+	tristate "Intel PMC Core driver"
+	depends on PCI
+	depends on ACPI
+	help
+	  The Intel Platform Controller Hub for Intel Core SoCs provides access
+	  to Power Management Controller registers via various interfaces. This
+	  driver can utilize debugging capabilities and supported features as
+	  exposed by the Power Management Controller. It also may perform some
+	  tasks in the PMC in order to enable transition into the SLPS0 state.
+	  It should be selected on all Intel platforms supported by the driver.
+
+	  Supported features:
+		- SLP_S0_RESIDENCY counter
+		- PCH IP Power Gating status
+		- LTR Ignore / LTR Show
+		- MPHY/PLL gating status (Sunrisepoint PCH only)
+		- SLPS0 Debug registers (Cannonlake/Icelake PCH)
+		- Low Power Mode registers (Tigerlake and beyond)
+		- PMC quirks as needed to enable SLPS0/S0ix
drivers/platform/x86/intel/pmc/Makefile new file +6 -0
new file mode 100644
index 000000000000..d819955543fe
@@ -0,0 +1,6 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+
+obj-$(CONFIG_INTEL_PMC_CORE)	+= intel_pmc_core.o
+intel_pmc_core-objs		+= core.o
+obj-$(CONFIG_INTEL_PMC_CORE)	+= pltdrv.o
drivers/platform/x86/intel/pmc/core.c renamed from drivers/platform/x86/intel_pmc_core.c +1 -1
similarity index 99%
rename from drivers/platform/x86/intel_pmc_core.c
rename to drivers/platform/x86/intel/pmc/core.c
index b0e486a6bdfb..f9de78b08e5d 100644
@@ -31,7 +31,7 @@
 #include <asm/msr.h>
 #include <asm/tsc.h>
 
-#include "intel_pmc_core.h"
+#include "core.h"
 
 #define ACPI_S0IX_DSM_UUID		"57a6512e-3979-4e9d-9708-ff13b2508972"
 #define ACPI_GET_LOW_MODE_REGISTERS	1
drivers/platform/x86/intel/pmc/core.h renamed from drivers/platform/x86/intel_pmc_core.h +0 -0
similarity index 100%
rename from drivers/platform/x86/intel_pmc_core.h
rename to drivers/platform/x86/intel/pmc/core.h
drivers/platform/x86/intel/pmc/pltdrv.c renamed from drivers/platform/x86/intel_pmc_core_pltdrv.c +0 -0
similarity index 100%
rename from drivers/platform/x86/intel_pmc_core_pltdrv.c
rename to drivers/platform/x86/intel/pmc/pltdrv.c
Signature · 1 line
2.25.1
#2 lore raw

Re: [PATCH v6 1/5] platform/x86/intel: intel_pmc_core: Move intel_pmc_core* files to pmc subfolder

Quoted 3 lines · Gayatri Kammela

As part of collecting Intel x86 specific drivers in their own folder, move intel_pmc_core* files to its own subfolder there.

...

Quoted 1 line
 .../pmc/pltdrv.c}                             |  0

I would go further and spell it as platform.c.

...

MAINTAINERS M: David E Box <[email protected]> · line 9480

Quoted 2 lines
MAINTAINERS +1 -1
-F:     drivers/platform/x86/intel_pmc_core*
+F:     drivers/platform/x86/intel/pmc/core*

This seems incorrect.

...

drivers/platform/x86/intel/pmc/Kconfig line 21

Quoted 8 lines
drivers/platform/x86/intel/pmc/Kconfig new file +7 -0
+         Supported features:
+               - SLP_S0_RESIDENCY counter
+               - PCH IP Power Gating status
+               - LTR Ignore / LTR Show
 
+               - MPHY/PLL gating status (Sunrisepoint PCH only)
+               - SLPS0 Debug registers (Cannonlake/Icelake PCH)
+               - Low Power Mode registers (Tigerlake and beyond)

Perhaps you may use the opportunity to spell codenames in a better way, i.e. Sunrise Point
Cannon Lake
Ice Lake
Tiger Lake

as it's done almost everywhere else in the kernel.

...

drivers/platform/x86/intel/pmc/Makefile line 5

Quoted 2 lines
drivers/platform/x86/intel/pmc/Makefile new file +2 -0
+obj-$(CONFIG_INTEL_PMC_CORE)   += intel_pmc_core.o
+intel_pmc_core-objs            += core.o

objs suffix is not for kernel modules.
Moreover, := has a difference to +=. Why is the latter in use?

Quoted 1 line

+obj-$(CONFIG_INTEL_PMC_CORE) += pltdrv.o

This will have the very same issue as with the core module. On top of that, do you need a separate module for it? If so, why?

Signature · 2 lines
With Best Regards,
Andy Shevchenko
#3 lore raw

RE: [PATCH v6 1/5] platform/x86/intel: intel_pmc_core: Move intel_pmc_core* files to pmc subfolder

Quoted 21 lines

-----Original Message-----
From: Andy Shevchenko <[email protected]>
Sent: Saturday, July 31, 2021 1:42 AM
To: Kammela, Gayatri <[email protected]>
Cc: Platform Driver <[email protected]>; Mark Gross <[email protected]>; Hans de Goede <[email protected]>; Rajneesh Bhardwaj <[email protected]>; Andy Shevchenko <[email protected]>; You-Sheng Yang <[email protected]>; Pandruvada, Srinivas <[email protected]>; Box, David E <[email protected]>; Qin, Chao <[email protected]>; Linux Kernel Mailing List <linux- [email protected]>; Mashiah, Tamar <[email protected]>; Greg Kroah-Hartman <[email protected]>; Rajat Jain <[email protected]>; Shyam Sundar S K <[email protected]>; Alex Deucher <[email protected]>; [email protected]
Subject: Re: [PATCH v6 1/5] platform/x86/intel: intel_pmc_core: Move intel_pmc_core* files to pmc subfolder

Quoted 1 line · Gayatri Kammela
Quoted 8 lines
Quoted 2 lines

As part of collecting Intel x86 specific drivers in their own folder, move intel_pmc_core* files to its own subfolder there.

...

Quoted 1 line
 .../pmc/pltdrv.c}                             |  0

I would go further and spell it as platform.c.

Hi Andy, sure! I have renamed the file as core_platform.c in the next version , so that it is consistent with the rest of the file names under intel/pmc/ (core.c, core.h , core_platform.c)

Quoted 7 lines

...

MAINTAINERS M: David E Box <[email protected]> · line 9480

Quoted 2 lines
MAINTAINERS +1 -1
-F:     drivers/platform/x86/intel_pmc_core*
+F:     drivers/platform/x86/intel/pmc/core*

This seems incorrect.

Yeah I agree. With the above change in the filename (core_platform.c), I think, this line in MAINTAINERS would make sense.

Quoted 12 lines

...

drivers/platform/x86/intel/pmc/Kconfig line 21

Quoted 8 lines
drivers/platform/x86/intel/pmc/Kconfig new file +7 -0
+         Supported features:
+               - SLP_S0_RESIDENCY counter
+               - PCH IP Power Gating status
+               - LTR Ignore / LTR Show
 
+               - MPHY/PLL gating status (Sunrisepoint PCH only)
+               - SLPS0 Debug registers (Cannonlake/Icelake PCH)
+               - Low Power Mode registers (Tigerlake and beyond)
Quoted 7 lines

Perhaps you may use the opportunity to spell codenames in a better way, i.e. Sunrise Point
Cannon Lake
Ice Lake
Tiger Lake

as it's done almost everywhere else in the kernel.

Sure! I have made changes as per your suggestion. Thanks!

Quoted 8 lines

...

drivers/platform/x86/intel/pmc/Makefile line 5

Quoted 2 lines
drivers/platform/x86/intel/pmc/Makefile new file +2 -0
+obj-$(CONFIG_INTEL_PMC_CORE)   += intel_pmc_core.o
+intel_pmc_core-objs            += core.o

objs suffix is not for kernel modules.
Moreover, := has a difference to +=. Why is the latter in use?

Yeah, it is not needed for kernel modules. I have made changes accordingly.

Quoted 5 lines
Quoted 2 lines

+obj-$(CONFIG_INTEL_PMC_CORE) += pltdrv.o

This will have the very same issue as with the core module. On top of that, do you need a separate module for it? If so, why?

I made changes, so that we won't have the same issue as with the core module. core_pltdrv has always been made as a separate module, Andy. Do you suggest that we don't need it as a separate module?

Quoted 4 lines

--
With Best Regards,
Andy Shevchenko

#4 lore raw

PATCH v6 2/5 platform/x86/intel: pmc/core: Add Alderlake support to pmc core driver

In reply to Gayatri Kammela

Add Alder Lake client and mobile support to pmc core driver.

---
 drivers/platform/x86/intel/pmc/core.c | 68 +++++++++++++++++++++++++++
 drivers/platform/x86/intel/pmc/core.h |  2 +
 2 files changed, 70 insertions(+)
drivers/platform/x86/intel/pmc/core.c +68 -0
index f9de78b08e5d..d4be15897d04 100644
@@ -645,6 +645,73 @@ static void pmc_core_get_tgl_lpm_reqs(struct platform_device *pdev)
 	ACPI_FREE(out_obj);
 }
 
+/* Alder Lake: PGD PFET Enable Ack Status Register(s) bitmap */
+static const struct pmc_bit_map adl_pfear_map[] = {
+	{"SPI/eSPI",		BIT(2)},
+	{"XHCI",		BIT(3)},
+	{"SPA",			BIT(4)},
+	{"SPB",			BIT(5)},
+	{"SPC",			BIT(6)},
+	{"GBE",			BIT(7)},
+
+	{"SATA",		BIT(0)},
+	{"HDA_PGD0",		BIT(1)},
+	{"HDA_PGD1",		BIT(2)},
+	{"HDA_PGD2",		BIT(3)},
+	{"HDA_PGD3",		BIT(4)},
+	{"SPD",			BIT(5)},
+	{"LPSS",		BIT(6)},
+
+	{"SMB",			BIT(0)},
+	{"ISH",			BIT(1)},
+	{"ITH",			BIT(3)},
+
+	{"XDCI",		BIT(1)},
+	{"DCI",			BIT(2)},
+	{"CSE",			BIT(3)},
+	{"CSME_KVM",		BIT(4)},
+	{"CSME_PMT",		BIT(5)},
+	{"CSME_CLINK",		BIT(6)},
+	{"CSME_PTIO",		BIT(7)},
+
+	{"CSME_USBR",		BIT(0)},
+	{"CSME_SUSRAM",		BIT(1)},
+	{"CSME_SMT1",		BIT(2)},
+	{"CSME_SMS2",		BIT(4)},
+	{"CSME_SMS1",		BIT(5)},
+	{"CSME_RTC",		BIT(6)},
+	{"CSME_PSF",		BIT(7)},
+
+	{"CNVI",		BIT(3)},
+
+	{"HDA_PGD4",		BIT(2)},
+	{"HDA_PGD5",		BIT(3)},
+	{"HDA_PGD6",		BIT(4)},
+	{}
+};
+
+static const struct pmc_bit_map *ext_adl_pfear_map[] = {
+	/*
+	 * Check intel_pmc_core_ids[] users of cnp_reg_map for
+	 * a list of core SoCs using this.
+	 */
+	adl_pfear_map,
+	NULL
+};
+
+static const struct pmc_reg_map adl_reg_map = {
+	.pfear_sts = ext_adl_pfear_map,
+	.slp_s0_offset = ADL_PMC_SLP_S0_RES_COUNTER_OFFSET,
+	.slp_s0_res_counter_step = TGL_PMC_SLP_S0_RES_COUNTER_STEP,
+	.msr_sts = msr_map,
+	.ltr_ignore_offset = CNP_PMC_LTR_IGNORE_OFFSET,
+	.regmap_length = CNP_PMC_MMIO_REG_LEN,
+	.ppfear0_offset = CNP_PMC_HOST_PPFEAR0A,
+	.ppfear_buckets = CNP_PPFEAR_NUM_ENTRIES,
+	.pm_cfg_offset = CNP_PMC_PM_CFG_OFFSET,
+	.pm_read_disable_bit = CNP_PMC_READ_DISABLE_BIT,
+};
+
 static inline u32 pmc_core_reg_read(struct pmc_dev *pmcdev, int reg_offset)
 {
 	return readl(pmcdev->regbase + reg_offset);
@@ -1574,6 +1641,7 @@ static const struct x86_cpu_id intel_pmc_core_ids[] = {
 	X86_MATCH_INTEL_FAM6_MODEL(ATOM_TREMONT_L,	&icl_reg_map),
 	X86_MATCH_INTEL_FAM6_MODEL(ROCKETLAKE,		&tgl_reg_map),
 	X86_MATCH_INTEL_FAM6_MODEL(ALDERLAKE_L,		&tgl_reg_map),
+	X86_MATCH_INTEL_FAM6_MODEL(ALDERLAKE,		&adl_reg_map),
 	{}
 };
 
drivers/platform/x86/intel/pmc/core.h +2 -0
index e8dae9c6c45f..c0ca20b32c6b 100644
@@ -197,6 +197,8 @@ enum ppfear_regs {
 #define TGL_NUM_IP_IGN_ALLOWED			23
 #define TGL_PMC_LPM_RES_COUNTER_STEP_X2		61	/* 30.5us * 2 */
 
+#define ADL_PMC_SLP_S0_RES_COUNTER_OFFSET	0x1098
+
 /*
  * Tigerlake Power Management Controller register offsets
  */
Signature · 1 line
2.25.1
#5 lore raw

PATCH v6 3/5 platform/x86/intel: pmc/core: Add Latency Tolerance Reporting (LTR) support to Alder Lake

In reply to Gayatri Kammela

Add support to show the Latency Tolerance Reporting for the IPs on the Alder Lake PCH as reported by the PMC. This LTR support on Alder Lake is slightly different from the Cannon lake PCH that is being reused by all platforms till Tiger Lake.

---
 drivers/platform/x86/intel/pmc/core.c | 39 +++++++++++++++++++++++++++
 drivers/platform/x86/intel/pmc/core.h |  2 ++
 2 files changed, 41 insertions(+)
drivers/platform/x86/intel/pmc/core.c +39 -0
index d4be15897d04..f2646fdf6c90 100644
@@ -699,10 +699,48 @@ static const struct pmc_bit_map *ext_adl_pfear_map[] = {
 	NULL
 };
 
+static const struct pmc_bit_map adl_ltr_show_map[] = {
+	{"SOUTHPORT_A",		CNP_PMC_LTR_SPA},
+	{"SOUTHPORT_B",		CNP_PMC_LTR_SPB},
+	{"SATA",		CNP_PMC_LTR_SATA},
+	{"GIGABIT_ETHERNET",	CNP_PMC_LTR_GBE},
+	{"XHCI",		CNP_PMC_LTR_XHCI},
+	{"SOUTHPORT_F",		ADL_PMC_LTR_SPF},
+	{"ME",			CNP_PMC_LTR_ME},
+	/* EVA is Enterprise Value Add, doesn't really exist on PCH */
+	{"SATA1",		CNP_PMC_LTR_EVA},
+	{"SOUTHPORT_C",		CNP_PMC_LTR_SPC},
+	{"HD_AUDIO",		CNP_PMC_LTR_AZ},
+	{"CNV",			CNP_PMC_LTR_CNV},
+	{"LPSS",		CNP_PMC_LTR_LPSS},
+	{"SOUTHPORT_D",		CNP_PMC_LTR_SPD},
+	{"SOUTHPORT_E",		CNP_PMC_LTR_SPE},
+	{"SATA2",		CNP_PMC_LTR_CAM},
+	{"ESPI",		CNP_PMC_LTR_ESPI},
+	{"SCC",			CNP_PMC_LTR_SCC},
+	{"ISH",			CNP_PMC_LTR_ISH},
+	{"UFSX2",		CNP_PMC_LTR_UFSX2},
+	{"EMMC",		CNP_PMC_LTR_EMMC},
+	/*
+	 * Check intel_pmc_core_ids[] users of cnp_reg_map for
+	 * a list of core SoCs using this.
+	 */
+	{"WIGIG",		ICL_PMC_LTR_WIGIG},
+	{"THC0",		TGL_PMC_LTR_THC0},
+	{"THC1",		TGL_PMC_LTR_THC1},
+	{"SOUTHPORT_G",		CNP_PMC_LTR_RESERVED},
+
+	/* Below two cannot be used for LTR_IGNORE */
+	{"CURRENT_PLATFORM",	CNP_PMC_LTR_CUR_PLT},
+	{"AGGREGATED_SYSTEM",	CNP_PMC_LTR_CUR_ASLT},
+	{}
+};
+
 static const struct pmc_reg_map adl_reg_map = {
 	.pfear_sts = ext_adl_pfear_map,
 	.slp_s0_offset = ADL_PMC_SLP_S0_RES_COUNTER_OFFSET,
 	.slp_s0_res_counter_step = TGL_PMC_SLP_S0_RES_COUNTER_STEP,
+	.ltr_show_sts = adl_ltr_show_map,
 	.msr_sts = msr_map,
 	.ltr_ignore_offset = CNP_PMC_LTR_IGNORE_OFFSET,
 	.regmap_length = CNP_PMC_MMIO_REG_LEN,
@@ -710,6 +748,7 @@ static const struct pmc_reg_map adl_reg_map = {
 	.ppfear_buckets = CNP_PPFEAR_NUM_ENTRIES,
 	.pm_cfg_offset = CNP_PMC_PM_CFG_OFFSET,
 	.pm_read_disable_bit = CNP_PMC_READ_DISABLE_BIT,
+	.ltr_ignore_max = ADL_NUM_IP_IGN_ALLOWED,
 };
 
 static inline u32 pmc_core_reg_read(struct pmc_dev *pmcdev, int reg_offset)
drivers/platform/x86/intel/pmc/core.h +2 -0
index c0ca20b32c6b..45b352ece6db 100644
@@ -197,6 +197,8 @@ enum ppfear_regs {
 #define TGL_NUM_IP_IGN_ALLOWED			23
 #define TGL_PMC_LPM_RES_COUNTER_STEP_X2		61	/* 30.5us * 2 */
 
+#define ADL_PMC_LTR_SPF				0x1C00
+#define ADL_NUM_IP_IGN_ALLOWED			23
 #define ADL_PMC_SLP_S0_RES_COUNTER_OFFSET	0x1098
 
 /*
Signature · 1 line
2.25.1
#6 lore raw

PATCH v6 4/5 platform/x86/intel: pmc/core: Add Alder Lake low power mode support for pmc core

In reply to Gayatri Kammela

Alder Lake has 14 status registers that are memory mapped. These registers show the status of the low power mode requirements. The registers are latched on every C10 entry or exit and on every s0ix.y entry/exit. Accessing these registers is useful for debugging any low power related activities.

Thus, add debugfs entry to access low power mode status registers.

---
 drivers/platform/x86/intel/pmc/core.c | 194 ++++++++++++++++++++++++++
 drivers/platform/x86/intel/pmc/core.h |  13 ++
 2 files changed, 207 insertions(+)
drivers/platform/x86/intel/pmc/core.c +194 -0
index f2646fdf6c90..e645ede591d8 100644
@@ -736,6 +736,189 @@ static const struct pmc_bit_map adl_ltr_show_map[] = {
 	{}
 };
 
+static const struct pmc_bit_map adl_clocksource_status_map[] = {
+	{"CLKPART1_OFF_STS",			BIT(0)},
+	{"CLKPART2_OFF_STS",			BIT(1)},
+	{"CLKPART3_OFF_STS",			BIT(2)},
+	{"CLKPART4_OFF_STS",			BIT(3)},
+	{"CLKPART5_OFF_STS",			BIT(4)},
+	{"CLKPART6_OFF_STS",			BIT(5)},
+	{"CLKPART7_OFF_STS",			BIT(6)},
+	{"CLKPART8_OFF_STS",			BIT(7)},
+	{"PCIE0PLL_OFF_STS",			BIT(10)},
+	{"PCIE1PLL_OFF_STS",			BIT(11)},
+	{"PCIE2PLL_OFF_STS",			BIT(12)},
+	{"PCIE3PLL_OFF_STS",			BIT(13)},
+	{"PCIE4PLL_OFF_STS",			BIT(14)},
+	{"PCIE5PLL_OFF_STS",			BIT(15)},
+	{"PCIE6PLL_OFF_STS",			BIT(16)},
+	{"USB2PLL_OFF_STS",			BIT(18)},
+	{"OCPLL_OFF_STS",			BIT(22)},
+	{"AUDIOPLL_OFF_STS",			BIT(23)},
+	{"GBEPLL_OFF_STS",			BIT(24)},
+	{"Fast_XTAL_Osc_OFF_STS",		BIT(25)},
+	{"AC_Ring_Osc_OFF_STS",			BIT(26)},
+	{"MC_Ring_Osc_OFF_STS",			BIT(27)},
+	{"SATAPLL_OFF_STS",			BIT(29)},
+	{"USB3PLL_OFF_STS",			BIT(31)},
+	{}
+};
+
+static const struct pmc_bit_map adl_power_gating_status_0_map[] = {
+	{"PMC_PGD0_PG_STS",			BIT(0)},
+	{"DMI_PGD0_PG_STS",			BIT(1)},
+	{"ESPISPI_PGD0_PG_STS",			BIT(2)},
+	{"XHCI_PGD0_PG_STS",			BIT(3)},
+	{"SPA_PGD0_PG_STS",			BIT(4)},
+	{"SPB_PGD0_PG_STS",			BIT(5)},
+	{"SPC_PGD0_PG_STS",			BIT(6)},
+	{"GBE_PGD0_PG_STS",			BIT(7)},
+	{"SATA_PGD0_PG_STS",			BIT(8)},
+	{"DSP_PGD0_PG_STS",			BIT(9)},
+	{"DSP_PGD1_PG_STS",			BIT(10)},
+	{"DSP_PGD2_PG_STS",			BIT(11)},
+	{"DSP_PGD3_PG_STS",			BIT(12)},
+	{"SPD_PGD0_PG_STS",			BIT(13)},
+	{"LPSS_PGD0_PG_STS",			BIT(14)},
+	{"SMB_PGD0_PG_STS",			BIT(16)},
+	{"ISH_PGD0_PG_STS",			BIT(17)},
+	{"NPK_PGD0_PG_STS",			BIT(19)},
+	{"PECI_PGD0_PG_STS",			BIT(21)},
+	{"XDCI_PGD0_PG_STS",			BIT(25)},
+	{"EXI_PGD0_PG_STS",			BIT(26)},
+	{"CSE_PGD0_PG_STS",			BIT(27)},
+	{"KVMCC_PGD0_PG_STS",			BIT(28)},
+	{"PMT_PGD0_PG_STS",			BIT(29)},
+	{"CLINK_PGD0_PG_STS",			BIT(30)},
+	{"PTIO_PGD0_PG_STS",			BIT(31)},
+	{}
+};
+
+static const struct pmc_bit_map adl_power_gating_status_1_map[] = {
+	{"USBR0_PGD0_PG_STS",			BIT(0)},
+	{"SMT1_PGD0_PG_STS",			BIT(2)},
+	{"CSMERTC_PGD0_PG_STS",			BIT(6)},
+	{"CSMEPSF_PGD0_PG_STS",			BIT(7)},
+	{"CNVI_PGD0_PG_STS",			BIT(19)},
+	{"DSP_PGD4_PG_STS",			BIT(26)},
+	{"SPG_PGD0_PG_STS",			BIT(27)},
+	{"SPE_PGD0_PG_STS",			BIT(28)},
+	{}
+};
+
+static const struct pmc_bit_map adl_power_gating_status_2_map[] = {
+	{"THC0_PGD0_PG_STS",			BIT(7)},
+	{"THC1_PGD0_PG_STS",			BIT(8)},
+	{"SPF_PGD0_PG_STS",			BIT(14)},
+	{}
+};
+
+static const struct pmc_bit_map adl_d3_status_0_map[] = {
+	{"ISH_D3_STS",				BIT(2)},
+	{"LPSS_D3_STS",				BIT(3)},
+	{"XDCI_D3_STS",				BIT(4)},
+	{"XHCI_D3_STS",				BIT(5)},
+	{"SPA_D3_STS",				BIT(12)},
+	{"SPB_D3_STS",				BIT(13)},
+	{"SPC_D3_STS",				BIT(14)},
+	{"SPD_D3_STS",				BIT(15)},
+	{"SPE_D3_STS",				BIT(16)},
+	{"DSP_D3_STS",				BIT(19)},
+	{"SATA_D3_STS",				BIT(20)},
+	{"DMI_D3_STS",				BIT(22)},
+	{}
+};
+
+static const struct pmc_bit_map adl_d3_status_1_map[] = {
+	{"GBE_D3_STS",				BIT(19)},
+	{"CNVI_D3_STS",				BIT(27)},
+	{}
+};
+
+static const struct pmc_bit_map adl_d3_status_2_map[] = {
+	{"CSMERTC_D3_STS",			BIT(1)},
+	{"CSE_D3_STS",				BIT(4)},
+	{"KVMCC_D3_STS",			BIT(5)},
+	{"USBR0_D3_STS",			BIT(6)},
+	{"SMT1_D3_STS",				BIT(8)},
+	{"PTIO_D3_STS",				BIT(16)},
+	{"PMT_D3_STS",				BIT(17)},
+	{}
+};
+
+static const struct pmc_bit_map adl_d3_status_3_map[] = {
+	{"THC0_D3_STS",				BIT(14)},
+	{"THC1_D3_STS",				BIT(15)},
+	{}
+};
+
+static const struct pmc_bit_map adl_vnn_req_status_0_map[] = {
+	{"ISH_VNN_REQ_STS",			BIT(2)},
+	{"ESPISPI_VNN_REQ_STS",			BIT(18)},
+	{"DSP_VNN_REQ_STS",			BIT(19)},
+	{}
+};
+
+static const struct pmc_bit_map adl_vnn_req_status_1_map[] = {
+	{"NPK_VNN_REQ_STS",			BIT(4)},
+	{"EXI_VNN_REQ_STS",			BIT(9)},
+	{"GBE_VNN_REQ_STS",			BIT(19)},
+	{"SMB_VNN_REQ_STS",			BIT(25)},
+	{"CNVI_VNN_REQ_STS",			BIT(27)},
+	{}
+};
+
+static const struct pmc_bit_map adl_vnn_req_status_2_map[] = {
+	{"CSMERTC_VNN_REQ_STS",			BIT(1)},
+	{"CSE_VNN_REQ_STS",			BIT(4)},
+	{"SMT1_VNN_REQ_STS",			BIT(8)},
+	{"CLINK_VNN_REQ_STS",			BIT(14)},
+	{"GPIOCOM4_VNN_REQ_STS",		BIT(20)},
+	{"GPIOCOM3_VNN_REQ_STS",		BIT(21)},
+	{"GPIOCOM2_VNN_REQ_STS",		BIT(22)},
+	{"GPIOCOM1_VNN_REQ_STS",		BIT(23)},
+	{"GPIOCOM0_VNN_REQ_STS",		BIT(24)},
+	{}
+};
+
+static const struct pmc_bit_map adl_vnn_req_status_3_map[] = {
+	{"GPIOCOM5_VNN_REQ_STS",		BIT(11)},
+	{}
+};
+
+static const struct pmc_bit_map adl_vnn_misc_status_map[] = {
+	{"CPU_C10_REQ_STS",			BIT(0)},
+	{"PCIe_LPM_En_REQ_STS",			BIT(3)},
+	{"ITH_REQ_STS",				BIT(5)},
+	{"CNVI_REQ_STS",			BIT(6)},
+	{"ISH_REQ_STS",				BIT(7)},
+	{"USB2_SUS_PG_Sys_REQ_STS",		BIT(10)},
+	{"PCIe_Clk_REQ_STS",			BIT(12)},
+	{"MPHY_Core_DL_REQ_STS",		BIT(16)},
+	{"Break-even_En_REQ_STS",		BIT(17)},
+	{"MPHY_SUS_REQ_STS",			BIT(22)},
+	{"xDCI_attached_REQ_STS",		BIT(24)},
+	{}
+};
+
+static const struct pmc_bit_map *adl_lpm_maps[] = {
+	adl_clocksource_status_map,
+	adl_power_gating_status_0_map,
+	adl_power_gating_status_1_map,
+	adl_power_gating_status_2_map,
+	adl_d3_status_0_map,
+	adl_d3_status_1_map,
+	adl_d3_status_2_map,
+	adl_d3_status_3_map,
+	adl_vnn_req_status_0_map,
+	adl_vnn_req_status_1_map,
+	adl_vnn_req_status_2_map,
+	adl_vnn_req_status_3_map,
+	adl_vnn_misc_status_map,
+	tgl_signal_status_map,
+	NULL
+};
+
 static const struct pmc_reg_map adl_reg_map = {
 	.pfear_sts = ext_adl_pfear_map,
 	.slp_s0_offset = ADL_PMC_SLP_S0_RES_COUNTER_OFFSET,
@@ -749,6 +932,17 @@ static const struct pmc_reg_map adl_reg_map = {
 	.pm_cfg_offset = CNP_PMC_PM_CFG_OFFSET,
 	.pm_read_disable_bit = CNP_PMC_READ_DISABLE_BIT,
 	.ltr_ignore_max = ADL_NUM_IP_IGN_ALLOWED,
+	.lpm_num_modes = ADL_LPM_NUM_MODES,
+	.lpm_num_maps = ADL_LPM_NUM_MAPS,
+	.lpm_res_counter_step_x2 = TGL_PMC_LPM_RES_COUNTER_STEP_X2,
+	.etr3_offset = ETR3_OFFSET,
+	.lpm_sts_latch_en_offset = ADL_LPM_STATUS_LATCH_EN_OFFSET,
+	.lpm_priority_offset = ADL_LPM_PRI_OFFSET,
+	.lpm_en_offset = ADL_LPM_EN_OFFSET,
+	.lpm_residency_offset = ADL_LPM_RESIDENCY_OFFSET,
+	.lpm_sts = adl_lpm_maps,
+	.lpm_status_offset = ADL_LPM_STATUS_OFFSET,
+	.lpm_live_status_offset = ADL_LPM_LIVE_STATUS_OFFSET,
 };
 
 static inline u32 pmc_core_reg_read(struct pmc_dev *pmcdev, int reg_offset)
drivers/platform/x86/intel/pmc/core.h +13 -0
index 45b352ece6db..333e25981e8e 100644
@@ -222,6 +222,18 @@ enum ppfear_regs {
 /* Extended Test Mode Register LPM bits (TGL and later */
 #define ETR3_CLEAR_LPM_EVENTS			BIT(28)
 
+/* Alder Lake Power Management Controller register offsets */
+#define ADL_LPM_EN_OFFSET			0x179C
+#define ADL_LPM_RESIDENCY_OFFSET		0x17A4
+#define ADL_LPM_NUM_MODES			2
+#define ADL_LPM_NUM_MAPS			14
+
+/* Alder Lake Low Power Mode debug registers */
+#define ADL_LPM_STATUS_OFFSET			0x170C
+#define ADL_LPM_PRI_OFFSET			0x17A0
+#define ADL_LPM_STATUS_LATCH_EN_OFFSET		0x1704
+#define ADL_LPM_LIVE_STATUS_OFFSET		0x1764
+
 const char *pmc_lpm_modes[] = {
 	"S0i2.0",
 	"S0i2.1",
@@ -281,6 +293,7 @@ struct pmc_reg_map {
 	const u32 pm_vric1_offset;
 	/* Low Power Mode registers */
 	const int lpm_num_maps;
+	const int lpm_num_modes;
 	const int lpm_res_counter_step_x2;
 	const u32 lpm_sts_latch_en_offset;
 	const u32 lpm_en_offset;
Signature · 1 line
2.25.1
#7 lore raw

PATCH v6 5/5 platform/x86/intel: pmc/core: Add GBE Package C10 fix for Alder Lake PCH

In reply to Gayatri Kammela

From: "David E. Box" <[email protected]>

Alder PCH uses the same Gigabit Ethernet (GBE) device as Tiger Lake PCH which cannot achieve PC10 without ignoring the PMC GBE LTR. Add this work around for Alder Lake PCH as well.

---
 drivers/platform/x86/intel/pmc/core.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)
drivers/platform/x86/intel/pmc/core.c +3 -3
index e645ede591d8..7c4bf7d22fd5 100644
@@ -1983,10 +1983,10 @@ static int pmc_core_probe(struct platform_device *pdev)
 		pmc_core_get_tgl_lpm_reqs(pdev);
 
 	/*
-	 * On TGL, due to a hardware limitation, the GBE LTR blocks PC10 when
-	 * a cable is attached. Tell the PMC to ignore it.
+	 * On TGL and ADL, due to a hardware limitation, the GBE LTR blocks PC10
+	 * when a cable is attached. Tell the PMC to ignore it.
 	 */
-	if (pmcdev->map == &tgl_reg_map) {
+	if (pmcdev->map == &tgl_reg_map || pmcdev->map == &adl_reg_map) {
 		dev_dbg(&pdev->dev, "ignoring GBE LTR\n");
 		pmc_core_send_ltr_ignore(pmcdev, 3);
 	}
Signature · 1 line
2.25.1
#8 lore raw

Re: [PATCH v6 5/5] platform/x86/intel: pmc/core: Add GBE Package C10 fix for Alder Lake PCH

Quoted 1 line · Gayatri Kammela

Alder PCH uses the same Gigabit Ethernet (GBE) device as Tiger Lake PCH

Alder Lake

Quoted 2 lines

which cannot achieve PC10 without ignoring the PMC GBE LTR. Add this work around for Alder Lake PCH as well.

...

drivers/platform/x86/intel/pmc/core.c static int pmc_core_probe(struct platform_device *pdev) · line 1988

Quoted 6 lines
        /*
drivers/platform/x86/intel/pmc/core.c +2 -2
-        * On TGL, due to a hardware limitation, the GBE LTR blocks PC10 when
-        * a cable is attached. Tell the PMC to ignore it.
+        * On TGL and ADL, due to a hardware limitation, the GBE LTR blocks PC10
+        * when a cable is attached. Tell the PMC to ignore it.
         */

TGL -> Tiger Lake
ADL -> Alder Lake

Signature · 2 lines
With Best Regards,
Andy Shevchenko
#9 lore raw
In reply to Gayatri Kammela

Hi Gayatri,

Quoted 17 lines · Gayatri Kammela

Hi,
The patch series move intel_pmc_core* files to pmc subfolder as well as add Alder Lake PCH-S support to PMC core driver.

Patch 1: Move intel_pmc_core* files to pmc subfolder Patch 2: Add Alderlake support to pmc core driver
Patch 3: Add Latency Tolerance Reporting (LTR) support to Alder Lake Patch 4: Add Alder Lake low power mode support for pmc core Patch 5: Add GBE Package C10 fix for Alder Lake

Changes since v1:
1) Add patch 1 to v2 i.e., Move intel_pmc_core* files to pmc subfolder.
2) Modify commit message for patch 2.

Changes since v2:
1) Dropped intel_pmc_ prefix from the file names.

Quoted 8 lines

Changes since v3:
1) Fixed an error reported by lkp.

Changes since v4:
1) Updated MAINTAINERS

Changes since v5:
1) Fixed an module name error reported by Chao Qin

Thank you for fixing this.

I expect that you will send a new version addressing Andy's remarks, so I'm going to drop this version from my queue.

Regards,

Hans

Quoted 40 lines

David E. Box (1):
platform/x86/intel: pmc/core: Add GBE Package C10 fix for Alder Lake
PCH

Gayatri Kammela (4):
platform/x86/intel: intel_pmc_core: Move intel_pmc_core* files to pmc
subfolder
platform/x86/intel: pmc/core: Add Alderlake support to pmc core driver platform/x86/intel: pmc/core: Add Latency Tolerance Reporting (LTR)
support to Alder Lake
platform/x86/intel: pmc/core: Add Alder Lake low power mode support
for pmc core

 MAINTAINERS                                   |   2 +-
 drivers/platform/x86/Kconfig                  |  21 --
 drivers/platform/x86/Makefile                 |   1 -
 drivers/platform/x86/intel/Kconfig            |   1 +
 drivers/platform/x86/intel/Makefile           |   1 +
 drivers/platform/x86/intel/pmc/Kconfig        |  22 ++
 drivers/platform/x86/intel/pmc/Makefile       |   6 +
 .../{intel_pmc_core.c => intel/pmc/core.c}    | 309 +++++++++++++++++-
 .../{intel_pmc_core.h => intel/pmc/core.h}    |  17 +
 .../pmc/pltdrv.c}                             |   0
 10 files changed, 353 insertions(+), 27 deletions(-)
 create mode 100644 drivers/platform/x86/intel/pmc/Kconfig
 create mode 100644 drivers/platform/x86/intel/pmc/Makefile
 rename drivers/platform/x86/{intel_pmc_core.c => intel/pmc/core.c} (85%)
 rename drivers/platform/x86/{intel_pmc_core.h => intel/pmc/core.h} (95%)
 rename drivers/platform/x86/{intel_pmc_core_pltdrv.c => intel/pmc/pltdrv.c} (100%)
Cc Srinivas Pandruvada <[email protected]>
Cc Andy Shevchenko <[email protected]>
Cc David Box <[email protected]>
Cc You-Sheng Yang <[email protected]>
Cc Hans de Goede <[email protected]>
Cc Rajneesh Bhardwaj <[email protected]>
Cc Chao Qin <[email protected]>

base-commit: c7d102232649226a69dddd58a4942cf13cff4f7c

#10 lore raw
Quoted 41 lines

-----Original Message-----
From: Hans de Goede <[email protected]>
Sent: Tuesday, August 3, 2021 5:19 AM
To: Kammela, Gayatri <[email protected]>; platform-driver- [email protected]
Cc: [email protected]; [email protected]; [email protected]; [email protected]; Pandruvada, Srinivas <[email protected]>; Box, David E <[email protected]>; Qin, Chao <[email protected]>; linux- [email protected]; Mashiah, Tamar <[email protected]>; [email protected]; [email protected]; Shyam-sundar.S- [email protected]; [email protected]; [email protected]
Subject: Re: [PATCH v6 0/5] Add Alder Lake PCH-S support to PMC core driver

Hi Gayatri,

Quoted 23 lines · Gayatri Kammela

Hi,
The patch series move intel_pmc_core* files to pmc subfolder as well as add Alder Lake PCH-S support to PMC core driver.

Patch 1: Move intel_pmc_core* files to pmc subfolder Patch 2: Add Alderlake support to pmc core driver Patch 3: Add Latency Tolerance Reporting (LTR) support to Alder Lake Patch 4: Add Alder Lake low power mode support for pmc core Patch 5: Add GBE Package C10 fix for Alder Lake

Changes since v1:
1) Add patch 1 to v2 i.e., Move intel_pmc_core* files to pmc subfolder.
2) Modify commit message for patch 2.

Changes since v2:
1) Dropped intel_pmc_ prefix from the file names.

Changes since v3:
1) Fixed an error reported by lkp.

Changes since v4:
1) Updated MAINTAINERS

Quoted 7 lines
Quoted 2 lines

Changes since v5:
1) Fixed an module name error reported by Chao Qin

Thank you for fixing this.

I expect that you will send a new version addressing Andy's remarks, so I'm going to drop this version from my queue.

Hi Hans! I just sent a new version addressing Andy's comments. Thanks!

Quoted 48 lines

Regards,

Hans

Quoted 42 lines

David E. Box (1):
platform/x86/intel: pmc/core: Add GBE Package C10 fix for Alder Lake
PCH

Gayatri Kammela (4):
platform/x86/intel: intel_pmc_core: Move intel_pmc_core* files to pmc
subfolder
platform/x86/intel: pmc/core: Add Alderlake support to pmc core driver platform/x86/intel: pmc/core: Add Latency Tolerance Reporting (LTR)
support to Alder Lake
platform/x86/intel: pmc/core: Add Alder Lake low power mode support
for pmc core

 MAINTAINERS                                   |   2 +-
 drivers/platform/x86/Kconfig                  |  21 --
 drivers/platform/x86/Makefile                 |   1 -
 drivers/platform/x86/intel/Kconfig            |   1 +
 drivers/platform/x86/intel/Makefile           |   1 +
 drivers/platform/x86/intel/pmc/Kconfig        |  22 ++
 drivers/platform/x86/intel/pmc/Makefile       |   6 +
 .../{intel_pmc_core.c => intel/pmc/core.c}    | 309 +++++++++++++++++-
 .../{intel_pmc_core.h => intel/pmc/core.h}    |  17 +
 .../pmc/pltdrv.c}                             |   0
 10 files changed, 353 insertions(+), 27 deletions(-)  create mode
100644 drivers/platform/x86/intel/pmc/Kconfig
 create mode 100644 drivers/platform/x86/intel/pmc/Makefile
 rename drivers/platform/x86/{intel_pmc_core.c => intel/pmc/core.c}

(85%) rename drivers/platform/x86/{intel_pmc_core.h => intel/pmc/core.h} (95%) rename drivers/platform/x86/{intel_pmc_core_pltdrv.c => intel/pmc/pltdrv.c} (100%)

Cc Srinivas Pandruvada <[email protected]>
Cc Andy Shevchenko <[email protected]>
Cc David Box <[email protected]>
Cc You-Sheng Yang <[email protected]>
Cc Hans de Goede <[email protected]>
Cc Rajneesh Bhardwaj <[email protected]>
Cc Chao Qin <[email protected]>

base-commit: c7d102232649226a69dddd58a4942cf13cff4f7c