Skip to contentSkip to conversation

Input: xpad - Additional controller support

PATCH Applied Vicki Pfau 2 participants 6 messages Jun 7, 2023 – Jul 8, 2023

Subsystems (2)
lore
Share & tools
lore

Vicki Pfau

author
#0 lore raw

cover Input: xpad - Additional controller support

This series includes two patches: one is a fixed resubmit of a previously reverted patch (first applied as db7220c48d8d), and the other is a simple addition to the VID table for Xbox One controllers.

Sam Lantinga (1):
Input: xpad - Add GameSir VID for Xbox One controllers

Vicki Pfau (1):
Input: xpad - fix support for some third-party controllers

 drivers/input/joystick/xpad.c | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)
Signature · 1 line
2.40.1
author
#1 lore raw

PATCH 1/2 Input: xpad - fix support for some third-party controllers

Some third-party controllers, such as the HORPIAD FPS for Nintendo Switch and Gamesir-G3w, require a specific packet that the first-party XInput driver sends before it will start sending reports. It's not currently known what this packet does, but since the first-party driver always sends it's unlikely that this could cause issues with existing controllers.

---
 drivers/input/joystick/xpad.c | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)
drivers/input/joystick/xpad.c +22 -0
index 5d6a25b42bf9..745047215e42 100644
@@ -264,6 +264,7 @@ static const struct xpad_device {
 	{ 0x0f0d, 0x0067, "HORIPAD ONE", 0, XTYPE_XBOXONE },
 	{ 0x0f0d, 0x0078, "Hori Real Arcade Pro V Kai Xbox One", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOXONE },
 	{ 0x0f0d, 0x00c5, "Hori Fighting Commander ONE", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOXONE },
+	{ 0x0f0d, 0x00dc, "HORIPAD FPS for Nintendo Switch", MAP_TRIGGERS_TO_BUTTONS, XTYPE_XBOX360 },
 	{ 0x0f30, 0x010b, "Philips Recoil", 0, XTYPE_XBOX },
 	{ 0x0f30, 0x0202, "Joytech Advanced Controller", 0, XTYPE_XBOX },
 	{ 0x0f30, 0x8888, "BigBen XBMiniPad Controller", 0, XTYPE_XBOX },
@@ -1720,6 +1721,27 @@ static int xpad_start_input(struct usb_xpad *xpad)
 			return error;
 		}
 	}
+	if (xpad->xtype == XTYPE_XBOX360) {
+		/*
+		 * Some third-party controllers Xbox 360-style controllers
+		 * require this message to finish initialization.
+		 */
+		u8 dummy[20];
+
+		error = usb_control_msg_recv(xpad->udev, 0,
+					     /* bRequest */ 0x01,
+					     /* bmRequestType */
+					     USB_TYPE_VENDOR | USB_DIR_IN |
+						USB_RECIP_INTERFACE,
+					     /* wValue */ 0x100,
+					     /* wIndex */ 0x00,
+					     dummy, sizeof(dummy),
+					     25, GFP_KERNEL);
+		if (error)
+			dev_warn(&xpad->dev->dev,
+				 "unable to receive magic message: %d\n",
+				 error);
+	}
 
 	return 0;
 }
Signature · 1 line
2.40.1
maintainer Applied
#2 lore raw

Re: [PATCH 1/2] Input: xpad - fix support for some third-party controllers

Quoted 8 lines · Vicki Pfau

Some third-party controllers, such as the HORPIAD FPS for Nintendo Switch and Gamesir-G3w, require a specific packet that the first-party XInput driver sends before it will start sending reports. It's not currently known what this packet does, but since the first-party driver always sends it's unlikely that this could cause issues with existing controllers.

Applied, thank you.

Signature · 1 line
Dmitry
author
#3 lore raw

PATCH 2/2 Input: xpad - Add GameSir VID for Xbox One controllers

In reply to Vicki Pfau

From: Sam Lantinga <[email protected]>

---
 drivers/input/joystick/xpad.c | 1 +
 1 file changed, 1 insertion(+)
drivers/input/joystick/xpad.c +1 -0
index 745047215e42..459b5c507399 100644
@@ -499,6 +499,7 @@ static const struct usb_device_id xpad_table[] = {
 	XPAD_XBOXONE_VENDOR(0x2dc8),		/* 8BitDo Pro 2 Wired Controller for Xbox */
 	XPAD_XBOXONE_VENDOR(0x2e24),		/* Hyperkin Duke Xbox One pad */
 	XPAD_XBOX360_VENDOR(0x2f24),		/* GameSir controllers */
+	XPAD_XBOXONE_VENDOR(0x3537),		/* GameSir Controllers */
 	XPAD_XBOX360_VENDOR(0x31e3),		/* Wooting Keyboards */
 	XPAD_XBOX360_VENDOR(0x3285),		/* Nacon GC-100 */
 	{ }
Signature · 1 line
2.40.1
maintainer
#4 lore raw

Re: [PATCH 2/2] Input: xpad - Add GameSir VID for Xbox One controllers

Quoted 13 lines · Vicki Pfau

From: Sam Lantinga <[email protected]>

---
 drivers/input/joystick/xpad.c | 1 +
 1 file changed, 1 insertion(+)
drivers/input/joystick/xpad.c +0 -0
index 745047215e42..459b5c507399 100644

drivers/input/joystick/xpad.c static const struct usb_device_id xpad_table[] = { · line 502

Quoted 4 lines
drivers/input/joystick/xpad.c +1 -0
@@ -499,6 +499,7 @@ static const struct usb_device_id xpad_table[] = {
 	XPAD_XBOXONE_VENDOR(0x2dc8),		/* 8BitDo Pro 2 Wired Controller for Xbox */
 	XPAD_XBOXONE_VENDOR(0x2e24),		/* Hyperkin Duke Xbox One pad */
 	XPAD_XBOX360_VENDOR(0x2f24),		/* GameSir controllers */
+	XPAD_XBOXONE_VENDOR(0x3537),		/* GameSir Controllers */

We try to keep this list sorted by vendor ID, so I moved this down and applied.

Quoted 6 lines
drivers/input/joystick/xpad.c +0 -0
 	XPAD_XBOX360_VENDOR(0x31e3),		/* Wooting Keyboards */
 	XPAD_XBOX360_VENDOR(0x3285),		/* Nacon GC-100 */
 	{ }
Signature · 1 line
2.40.1

Thanks.

Signature · 1 line
Dmitry
author
#5 lore raw
In reply to Vicki Pfau

Hello,

Quoted 4 lines · Vicki Pfau

This series includes two patches: one is a fixed resubmit of a previously reverted patch (first applied as db7220c48d8d), and the other is a simple addition to the VID table for Xbox One controllers.

Quoted 9 lines

Sam Lantinga (1):
Input: xpad - Add GameSir VID for Xbox One controllers

Vicki Pfau (1):
Input: xpad - fix support for some third-party controllers

 drivers/input/joystick/xpad.c | 23 +++++++++++++++++++++++
 1 file changed, 23 insertions(+)

This series has been radio silent for over three weeks. It includes an easy patch as well as a fixed version of the previously reverted patch I submitted. Is there anything else I need to do? I almost forgot about it, but would like to make sure it's addressed at some point.

Thanks