Skip to contentSkip to conversation

x86/split_lock: Make life miserable for split lockers

PATCH Superseded Tony Luck 6 participants 16 messages Feb 17, 2022 – Apr 27, 2022

Subsystems (4)
lore
Share & tools
lore

Tony Luck

author
#0 lore raw

PATCH 1/1 x86/split_lock: Make life miserable for split lockers

In https://lore.kernel.org/all/87y22uujkm.ffs@tglx/ Thomas said:

Its's simply wishful thinking that stuff gets fixed because of a WARN_ONCE(). This has never worked. The only thing which works is to make stuff fail hard or slow it down in a way which makes it annoying enough to users to complain.

He was talking about WBINVD. But it made me think about how we use the split lock detection feature in Linux.

Existing code has three options for applications:
1) Don't enable split lock detection (allow arbitrary split locks)
2) Warn once when a process uses split lock, but let the process keep running with split lock detection disabled
3) Kill process that use split locks

Option 2 falls into the "wishful thinking" territory that Thomas warns does nothing. But option 3 might not be viable in a situation with legacy applications that need to run.

Hence a new option to "slow it down in a way which makes it annoying".

Primary reason for this change is to provide better quality of service to the rest of the applications running on the system. Internal testing shows that even with many processes splitting locks, performance for the rest of the system is much more responsive.

Add a new choice to the existing "split_lock_detect" boot parameter "sequential". In this mode split lock detection is enabled. When an application tries to execute a bus lock the #AC handler.

1) Blocks (interruptibly) until it can get the semaphore If interrupted, just return. Assume the signal will either kill the task, or direct execution away from the instruction that is trying to get the bus lock.
2) Disables split lock detection for the current core
3) Schedules a work queue to re-enable split lock detect in 2 jiffies
4) Returns

The work queue that re-enables split lock detection also releases the semaphore.

There is a corner case where a CPU may be taken offline while split lock detection is disabled. A CPU hotplug handler handles this case.

Questions for this RFC:

1) Does this need to be a new option? Maybe just update the existing "warn" mode to add this level of extra pain.
2) Under what circumstances will work a function scheduled with schedule_delayed_work() run on different CPU? I've covered the obvious case of the CPU being taken offline before the work is run. But are there other cases?
3) Should I add even more pain with an msleep() before even trying to get the semaphore?

---
 arch/x86/kernel/cpu/intel.c | 67 ++++++++++++++++++++++++++++++++-----
 1 file changed, 59 insertions(+), 8 deletions(-)
arch/x86/kernel/cpu/intel.c +59 -8
index 8321c43554a1..a331c4a71847 100644
@@ -7,10 +7,13 @@
 #include <linux/smp.h>
 #include <linux/sched.h>
 #include <linux/sched/clock.h>
+#include <linux/semaphore.h>
 #include <linux/thread_info.h>
 #include <linux/init.h>
 #include <linux/uaccess.h>
+#include <linux/workqueue.h>
 #include <linux/delay.h>
+#include <linux/cpuhotplug.h>
 
 #include <asm/cpufeature.h>
 #include <asm/msr.h>
@@ -43,6 +46,7 @@ enum split_lock_detect_state {
 	sld_warn,
 	sld_fatal,
 	sld_ratelimit,
+	sld_sequential,
 };
 
 /*
@@ -1002,10 +1006,13 @@ static const struct {
 	{ "warn",	sld_warn  },
 	{ "fatal",	sld_fatal },
 	{ "ratelimit:", sld_ratelimit },
+	{ "sequential", sld_sequential },
 };
 
 static struct ratelimit_state bld_ratelimit;
 
+static DEFINE_SEMAPHORE(buslock_sem);
+
 static inline bool match_option(const char *arg, int arglen, const char *opt)
 {
 	int len = strlen(opt), ratelimit;
@@ -1045,7 +1052,7 @@ static bool split_lock_verify_msr(bool on)
 
 static void __init sld_state_setup(void)
 {
-	enum split_lock_detect_state state = sld_warn;
+	enum split_lock_detect_state state = sld_sequential;
 	char arg[20];
 	int i, ret;
 
@@ -1116,23 +1123,60 @@ static void split_lock_init(void)
 		split_lock_verify_msr(sld_state != sld_off);
 }
 
+static void __split_lock_reenable(struct work_struct *work)
+{
+	sld_update_msr(true);
+	up(&buslock_sem);
+}
+
+/*
+ * If a CPU goes offline with pending delayed work to
+ * re-enable split lock detection then the delayed work
+ * will be executed on some other CPU. That handles releasing
+ * the buslock_sem, but because it executes on a different
+ * CPU probably won't re-enable split lock detection. This
+ * is a problem on HT systems since the sibling CPU on the
+ * same core may then be left running with split lock
+ * detection disabled.
+ *
+ * Unconditionally re-enable detection here.
+ */
+static int splitlock_cpu_offline(unsigned int cpu)
+{
+	sld_update_msr(true);
+
+	return 0;
+}
+
+static DECLARE_DELAYED_WORK(split_lock_reenable, __split_lock_reenable);
+
 static void split_lock_warn(unsigned long ip)
 {
 	pr_warn_ratelimited("#AC: %s/%d took a split_lock trap at address: 0x%lx\n",
 			    current->comm, current->pid, ip);
 
-	/*
-	 * Disable the split lock detection for this task so it can make
-	 * progress and set TIF_SLD so the detection is re-enabled via
-	 * switch_to_sld() when the task is scheduled out.
-	 */
+	switch (sld_state) {
+	case sld_warn:
+		/* This task will keep running with split lock disabled */
+		set_tsk_thread_flag(current, TIF_SLD);
+		break;
+	case sld_sequential:
+		/* Only allow one buslocked disabled core at a time */
+		if (down_interruptible(&buslock_sem) == -EINTR)
+			return;
+		schedule_delayed_work(&split_lock_reenable, 2);
+		break;
+	default:
+		break;
+	}
+
+	/* Disable split lock detection to make progress */
 	sld_update_msr(false);
-	set_tsk_thread_flag(current, TIF_SLD);
 }
 
 bool handle_guest_split_lock(unsigned long ip)
 {
-	if (sld_state == sld_warn) {
+	if (sld_state == sld_warn || sld_state == sld_sequential) {
 		split_lock_warn(ip);
 		return true;
 	}
@@ -1191,6 +1235,7 @@ void handle_bus_lock(struct pt_regs *regs)
 		/* Warn on the bus lock. */
 		fallthrough;
 	case sld_warn:
+	case sld_sequential:
 		pr_warn_ratelimited("#DB: %s/%d took a bus_lock trap at address: 0x%lx\n",
 				    current->comm, current->pid, regs->ip);
 		break;
@@ -1299,6 +1344,12 @@ static void sld_state_show(void)
 		if (boot_cpu_has(X86_FEATURE_BUS_LOCK_DETECT))
 			pr_info("#DB: setting system wide bus lock rate limit to %u/sec\n", bld_ratelimit.burst);
 		break;
+	case sld_sequential:
+		pr_info("#AC: crashing the kernel on kernel split_locks and forcing sequential access for user-space split locks\n");
+		if (cpuhp_setup_state(CPUHP_AP_ONLINE_DYN,
+				      "x86/splitlock", NULL, splitlock_cpu_offline) < 0)
+			pr_warn("No splitlock CPU offline handler\n");
+		break;
 	}
 }
 
Signature · 1 line
2.35.1
#1 lore raw

Tony,

Quoted 4 lines · Tony Luck

Questions for this RFC:

1) Does this need to be a new option? Maybe just update the existing "warn" mode to add this level of extra pain.

That's fine. Warn is the default today, right?

Quoted 2 lines

2) Under what circumstances will work a function scheduled with schedule_delayed_work() run on different CPU?

Under many...

Quoted 2 lines

I've covered the obvious case of the CPU being taken offline before the work is run. But are there other cases?

scheduled_delayed_work_on() is what you are looking for.

Quoted 2 lines

3) Should I add even more pain with an msleep() before even trying to get the semaphore?

No objections from me.

Quoted 7 lines
arch/x86/kernel/cpu/intel.c +7 -0
+static void __split_lock_reenable(struct work_struct *work)
+{
+	sld_update_msr(true);
+	up(&buslock_sem);
+}
+
+/*

arch/x86/kernel/cpu/intel.c static void split_lock_init(void) · line 1142

Quoted 10 lines
arch/x86/kernel/cpu/intel.c +10 -0
+ * If a CPU goes offline with pending delayed work to
+ * re-enable split lock detection then the delayed work
+ * will be executed on some other CPU. That handles releasing
+ * the buslock_sem, but because it executes on a different
+ * CPU probably won't re-enable split lock detection. This
+ * is a problem on HT systems since the sibling CPU on the
+ * same core may then be left running with split lock
+ * detection disabled.
+ *
+ * Unconditionally re-enable detection here.

Had to think twice whether this works under all circumstances. It actually works because of how CPU hotunplug works nowadays. It guarantees that after the initial CPU down state sched_cpu_deactivate() no task which is running or affine to the CPU can get back to user space on that CPU. That was not always the case, that's why I had to think twice :)

But I'm not yet convinced that this is required at all.

Quoted 20 lines

+ */

arch/x86/kernel/cpu/intel.c +9 -5
+static int splitlock_cpu_offline(unsigned int cpu)
+{
+	sld_update_msr(true);
+
+	return 0;
+}
+
+static DECLARE_DELAYED_WORK(split_lock_reenable, __split_lock_reenable);
+
 static void split_lock_warn(unsigned long ip)
 {
 	pr_warn_ratelimited("#AC: %s/%d took a split_lock trap at address: 0x%lx\n",
 			    current->comm, current->pid, ip);
 
-	/*
-	 * Disable the split lock detection for this task so it can make
-	 * progress and set TIF_SLD so the detection is re-enabled via
-	 * switch_to_sld() when the task is scheduled out.
-	 */

arch/x86/kernel/cpu/intel.c static void split_lock_init(void) · line 1167

Quoted 10 lines
arch/x86/kernel/cpu/intel.c +10 -0
+	switch (sld_state) {
+	case sld_warn:
+		/* This task will keep running with split lock disabled */
+		set_tsk_thread_flag(current, TIF_SLD);
+		break;
+	case sld_sequential:
+		/* Only allow one buslocked disabled core at a time */
+		if (down_interruptible(&buslock_sem) == -EINTR)
+			return;
+		schedule_delayed_work(&split_lock_reenable, 2);

Hmm. This does not set TIF_SLD. So:

task hits splitlock
#AC

     down(sema);
     schedule_work();
     disable_sld();

task is preempted or schedules out voluntarily

-> SLD stays disabled for the incoming task which is wrong and it
stays disabled up to the point where the timer fires or a task switch with TIF_SLD mismatch happens.

Not what we want, right?

So the right thing to do is to set TIF_SLD also for the sequential case. Now how to do that delayed split lock reenable for the task in question?

	case sld_sequential:
		if (down_interruptible(&buslock_sem) == -EINTR)
			return;
		set_tsk_thread_flag(current, TIF_SLD);
                buslock_sequential_task = current;
                get_task_struct(current);
		schedule_delayed_work_on(smp_processor_id(), &split_lock_reenable, 2);

and then the work function does:

    clear_tsk_thread_flag(buslock_sequential_task, TIF_SLD);
    put_task_struct(buslock_sequential_task);
    buslock_sequential_task = NULL;
    up(&buslock_sem);

With that you spare the cpu hotplug callback as well simply because it's guaranteed that the SLD state is handled correctly when the task in question schedules out. I.e. it does not matter at all on which CPU the timer goes off if the CPU on which is was armed is offlined before it fires.

But that's nasty too because if the task schedules away from the CPU on which it hit the buslock in the first place and then stays on the other CPU in user space forever (think NOHZ_FULL) then it can buslock forever too.

The question is whether this is something to worry about. If so, then we need to go back to the drawing board.

Thanks,

tglx

author
#2 lore raw
Quoted 9 lines · Thomas Gleixner

Tony,

Quoted 4 lines · Tony Luck

Questions for this RFC:

1) Does this need to be a new option? Maybe just update the existing "warn" mode to add this level of extra pain.

That's fine. Warn is the default today, right?

Yes. Warn is the current default.
Does "That's fine" mean ok to change exiting warn code to add this level of pain? Or OK to add a new option?

Quoted 9 lines
Quoted 2 lines

2) Under what circumstances will work a function scheduled with schedule_delayed_work() run on different CPU?

Under many...

Quoted 2 lines

I've covered the obvious case of the CPU being taken offline before the work is run. But are there other cases?

scheduled_delayed_work_on() is what you are looking for.

That sounds like the right choice ... I just didn't dig deep enough into the options available.

Quoted 4 lines
Quoted 2 lines

3) Should I add even more pain with an msleep() before even trying to get the semaphore?

No objections from me.

Will do in next version.

Quoted 66 lines
Quoted 7 lines
arch/x86/kernel/cpu/intel.c +7 -0
+static void __split_lock_reenable(struct work_struct *work)
+{
+	sld_update_msr(true);
+	up(&buslock_sem);
+}
+
+/*

arch/x86/kernel/cpu/intel.c static void split_lock_init(void) · line 1142

Quoted 10 lines
arch/x86/kernel/cpu/intel.c +10 -0
+ * If a CPU goes offline with pending delayed work to
+ * re-enable split lock detection then the delayed work
+ * will be executed on some other CPU. That handles releasing
+ * the buslock_sem, but because it executes on a different
+ * CPU probably won't re-enable split lock detection. This
+ * is a problem on HT systems since the sibling CPU on the
+ * same core may then be left running with split lock
+ * detection disabled.
+ *
+ * Unconditionally re-enable detection here.

Had to think twice whether this works under all circumstances. It actually works because of how CPU hotunplug works nowadays. It guarantees that after the initial CPU down state sched_cpu_deactivate() no task which is running or affine to the CPU can get back to user space on that CPU. That was not always the case, that's why I had to think twice :)

But I'm not yet convinced that this is required at all.

Quoted 20 lines

+ */

arch/x86/kernel/cpu/intel.c +9 -5
+static int splitlock_cpu_offline(unsigned int cpu)
+{
+	sld_update_msr(true);
+
+	return 0;
+}
+
+static DECLARE_DELAYED_WORK(split_lock_reenable, __split_lock_reenable);
+
 static void split_lock_warn(unsigned long ip)
 {
 	pr_warn_ratelimited("#AC: %s/%d took a split_lock trap at address: 0x%lx\n",
 			    current->comm, current->pid, ip);
 
-	/*
-	 * Disable the split lock detection for this task so it can make
-	 * progress and set TIF_SLD so the detection is re-enabled via
-	 * switch_to_sld() when the task is scheduled out.
-	 */

arch/x86/kernel/cpu/intel.c static void split_lock_init(void) · line 1167

Quoted 10 lines
arch/x86/kernel/cpu/intel.c +10 -0
+	switch (sld_state) {
+	case sld_warn:
+		/* This task will keep running with split lock disabled */
+		set_tsk_thread_flag(current, TIF_SLD);
+		break;
+	case sld_sequential:
+		/* Only allow one buslocked disabled core at a time */
+		if (down_interruptible(&buslock_sem) == -EINTR)
+			return;
+		schedule_delayed_work(&split_lock_reenable, 2);

Hmm. This does not set TIF_SLD. So:

task hits splitlock
#AC

     down(sema);
     schedule_work();
     disable_sld();
Quoted 7 lines

task is preempted or schedules out voluntarily

-> SLD stays disabled for the incoming task which is wrong and it
stays disabled up to the point where the timer fires or a task switch with TIF_SLD mismatch happens.

Not what we want, right?

It isn't ideal. We just gave a free pass to some other tasks to do split locks for up to two jiffies. But they would have been given those two jiffies later had they taken an #AC trap ... so they just bypassed the queue to get what we would have given them later.

Quoted 25 lines

So the right thing to do is to set TIF_SLD also for the sequential case. Now how to do that delayed split lock reenable for the task in question?

	case sld_sequential:
		if (down_interruptible(&buslock_sem) == -EINTR)
			return;
		set_tsk_thread_flag(current, TIF_SLD);
                buslock_sequential_task = current;
                get_task_struct(current);
		schedule_delayed_work_on(smp_processor_id(), &split_lock_reenable, 2);

and then the work function does:

    clear_tsk_thread_flag(buslock_sequential_task, TIF_SLD);
    put_task_struct(buslock_sequential_task);
    buslock_sequential_task = NULL;
    up(&buslock_sem);

With that you spare the cpu hotplug callback as well simply because it's guaranteed that the SLD state is handled correctly when the task in question schedules out. I.e. it does not matter at all on which CPU the timer goes off if the CPU on which is was armed is offlined before it fires.

Quoted 4 lines

But that's nasty too because if the task schedules away from the CPU on which it hit the buslock in the first place and then stays on the other CPU in user space forever (think NOHZ_FULL) then it can buslock forever too.

Agreed. Trying to get this "perfect" has many ugly corner cases.

Quoted 2 lines

The question is whether this is something to worry about. If so, then we need to go back to the drawing board.

I don't think it is worth worrying about. The case you describe is a process that is about to be preempted when the #AC trap happens. In that case this CPU (in fact both HT threads on this core) get two jiffies of free split locks. Cases from here:

1) The original process gets to run on either of these threads before the timeout. They get to execute their split lock and carry on running.

2) The process is scheduled on a different core during the two jiffie window. They take an #AC trap and block on the semaphore until the original core releases. Then they get their chance to run on this new core.

3) The original process doesn't get rescheduled for two jiffies, then runs somewhere. The original core has released the sempahore and re-enabled split lock checking. So the process takes #AC, gets the semaphore, kernel disables split lock checking ... and we try again.

Now it is possible that the process may repeatedly be preempted in between getting the semaphore and actually getting all the way to user space to split a lock ... but can only happen if there are multiple processes splitting locks. The goal of this patch is to be mean to all of them. If we happen to be extra mean to some of them, well so be it.

-Tony

#3 lore raw

Tony,

Quoted 4 lines · Tony Luck
Quoted 3 lines · Thomas Gleixner
Quoted 2 lines · Tony Luck

Questions for this RFC:

Quoted 8 lines
Quoted 4 lines
Quoted 2 lines

1) Does this need to be a new option? Maybe just update the existing "warn" mode to add this level of extra pain.

That's fine. Warn is the default today, right?

Yes. Warn is the current default.
Does "That's fine" mean ok to change exiting warn code to add this level of pain? Or OK to add a new option?

Add pain to the existing warn code.

Quoted 22 lines
Quoted 2 lines

The question is whether this is something to worry about. If so, then we need to go back to the drawing board.

I don't think it is worth worrying about. The case you describe is a process that is about to be preempted when the #AC trap happens. In that case this CPU (in fact both HT threads on this core) get two jiffies of free split locks. Cases from here:

1) The original process gets to run on either of these threads before the timeout. They get to execute their split lock and carry on running.

2) The process is scheduled on a different core during the two jiffie window. They take an #AC trap and block on the semaphore until the original core releases. Then they get their chance to run on this new core.

3) The original process doesn't get rescheduled for two jiffies, then runs somewhere. The original core has released the sempahore and re-enabled split lock checking. So the process takes #AC, gets the semaphore, kernel disables split lock checking ... and we try again.

Quoted 5 lines

Now it is possible that the process may repeatedly be preempted in between getting the semaphore and actually getting all the way to user space to split a lock ... but can only happen if there are multiple processes splitting locks. The goal of this patch is to be mean to all of them. If we happen to be extra mean to some of them, well so be it.

Fair enough.

I still do not like the inconsistent state between the TIF flag and the SLD MSR.

Thanks,

tglx

author
#4 lore raw
Quoted 2 lines

I still do not like the inconsistent state between the TIF flag and the SLD MSR.

If I'm updating the "warn" option to work this way, I think I can make the TIF flag and the code that updates the MSR in context switch go away. But need to work though the patch to make sure I'm not missing something.

-Tony

author
#5 lore raw

v2 cover Make life miserable for split lockers

In reply to Tony Luck

See part 0001 commit message for what & why.

Changes since v1(RFC) based on feedback from Thomas:

1) No longer implemented as new sub-option of split_lock_detect boot option. Just update the existing (default) "warn" mode.
2) Use the (more appropriate) "schedule_delayed_work_on() instead of schedule_delayed_work() to re-enable split lock detection.
3) Add msleep for extra misery before disabling split lock detection on a core.

Next two aren't from Thomas.
4) Drop the TIF_SLD bit and associated code. No longer needed. This part is done as clean up in patch 0002.
5) Add a bit in task structure to make sure each split-locking task only tries to print a warn message to the console once. Need this to preserve existing behavior that was previously controlled by the TIF_SLD bit.

Testing notes. I checked this out by running 2,000 processes that each looped executing 10,000 split locks. System remains very responsive while this test is running (compared with unusable without these patches). When each process gets the semaphore and two jiffies of time to execute split locks it manages to complete ~430 before the delayed work thread re-enables detection.

The semaphore gives nice round-robin access to the 2,000 tasks. So each ends up blocking for 24ish seconds while the other 1,999 task take their turn.

Tony Luck (2):
x86/split_lock: Make life miserable for split lockers x86/split-lock: Remove unused TIF_SLD bit

 arch/x86/include/asm/cpu.h         |  2 -
 arch/x86/include/asm/thread_info.h |  4 +-
 arch/x86/kernel/cpu/intel.c        | 77 +++++++++++++++++++++---------
 arch/x86/kernel/process.c          |  3 --
 include/linux/sched.h              |  3 ++
 kernel/fork.c                      |  5 ++
 6 files changed, 64 insertions(+), 30 deletions(-)
Signature · 1 line
2.35.1
author
#6 lore raw

PATCH v2 1/2 x86/split_lock: Make life miserable for split lockers

In https://lore.kernel.org/all/87y22uujkm.ffs@tglx/ Thomas said:

Its's simply wishful thinking that stuff gets fixed because of a WARN_ONCE(). This has never worked. The only thing which works is to make stuff fail hard or slow it down in a way which makes it annoying enough to users to complain.

He was talking about WBINVD. But it made me think about how we use the split lock detection feature in Linux.

Existing code has three options for applications:
1) Don't enable split lock detection (allow arbitrary split locks)
2) Warn once when a process uses split lock, but let the process keep running with split lock detection disabled
3) Kill process that use split locks

Option 2 falls into the "wishful thinking" territory that Thomas warns does nothing. But option 3 might not be viable in a situation with legacy applications that need to run.

Hence make option 2 much stricter to "slow it down in a way which makes it annoying".

Primary reason for this change is to provide better quality of service to the rest of the applications running on the system. Internal testing shows that even with many processes splitting locks, performance for the rest of the system is much more responsive.

The new "warn" mode operates like this. When an application tries to execute a bus lock the #AC handler.

1) Delays (interruptibly) 10 ms before moving to next step.
2) Blocks (interruptibly) until it can get the semaphore If interrupted, just return. Assume the signal will either kill the task, or direct execution away from the instruction that is trying to get the bus lock.
3) Disables split lock detection for the current core
4) Schedules a work queue to re-enable split lock detect in 2 jiffies
5) Returns

The work queue that re-enables split lock detection also releases the semaphore.

There is a corner case where a CPU may be taken offline while split lock detection is disabled. A CPU hotplug handler handles this case.

Old behaviour was to only print the split lock warning on the first occurrence of a split lock from a task. Preserve that by adding a flag to the task structure that suppresses subsequent split lock messages from that task.

---
 arch/x86/kernel/cpu/intel.c | 65 +++++++++++++++++++++++++++++++------
 include/linux/sched.h       |  3 ++
 kernel/fork.c               |  5 +++
 3 files changed, 63 insertions(+), 10 deletions(-)
arch/x86/kernel/cpu/intel.c +55 -10
index 8321c43554a1..2536784511e3 100644
@@ -7,10 +7,13 @@
 #include <linux/smp.h>
 #include <linux/sched.h>
 #include <linux/sched/clock.h>
+#include <linux/semaphore.h>
 #include <linux/thread_info.h>
 #include <linux/init.h>
 #include <linux/uaccess.h>
+#include <linux/workqueue.h>
 #include <linux/delay.h>
+#include <linux/cpuhotplug.h>
 
 #include <asm/cpufeature.h>
 #include <asm/msr.h>
@@ -1006,6 +1009,8 @@ static const struct {
 
 static struct ratelimit_state bld_ratelimit;
 
+static DEFINE_SEMAPHORE(buslock_sem);
+
 static inline bool match_option(const char *arg, int arglen, const char *opt)
 {
 	int len = strlen(opt), ratelimit;
@@ -1116,18 +1121,54 @@ static void split_lock_init(void)
 		split_lock_verify_msr(sld_state != sld_off);
 }
 
+static void __split_lock_reenable(struct work_struct *work)
+{
+	sld_update_msr(true);
+	up(&buslock_sem);
+}
+
+/*
+ * If a CPU goes offline with pending delayed work to
+ * re-enable split lock detection then the delayed work
+ * will be executed on some other CPU. That handles releasing
+ * the buslock_sem, but because it executes on a different
+ * CPU probably won't re-enable split lock detection. This
+ * is a problem on HT systems since the sibling CPU on the
+ * same core may then be left running with split lock
+ * detection disabled.
+ *
+ * Unconditionally re-enable detection here.
+ */
+static int splitlock_cpu_offline(unsigned int cpu)
+{
+	sld_update_msr(true);
+
+	return 0;
+}
+
+static DECLARE_DELAYED_WORK(split_lock_reenable, __split_lock_reenable);
+
 static void split_lock_warn(unsigned long ip)
 {
-	pr_warn_ratelimited("#AC: %s/%d took a split_lock trap at address: 0x%lx\n",
-			    current->comm, current->pid, ip);
+	int cpu;
 
-	/*
-	 * Disable the split lock detection for this task so it can make
-	 * progress and set TIF_SLD so the detection is re-enabled via
-	 * switch_to_sld() when the task is scheduled out.
-	 */
+	if (!current->reported_split_lock)
+		pr_warn_ratelimited("#AC: %s/%d took a split_lock trap at address: 0x%lx\n",
+				    current->comm, current->pid, ip);
+	current->reported_split_lock = 1;
+
+	/* misery factor #1, sleep 10ms before trying to execute split lock */
+	if (msleep_interruptible(10) > 0)
+		return;
+	/* Misery factor #2, only allow one buslocked disabled core at a time */
+	if (down_interruptible(&buslock_sem) == -EINTR)
+		return;
+	cpu = get_cpu();
+	schedule_delayed_work_on(cpu, &split_lock_reenable, 2);
+
+	/* Disable split lock detection on this CPU to make progress */
 	sld_update_msr(false);
-	set_tsk_thread_flag(current, TIF_SLD);
+	put_cpu();
 }
 
 bool handle_guest_split_lock(unsigned long ip)
@@ -1281,10 +1322,14 @@ static void sld_state_show(void)
 		pr_info("disabled\n");
 		break;
 	case sld_warn:
-		if (boot_cpu_has(X86_FEATURE_SPLIT_LOCK_DETECT))
+		if (boot_cpu_has(X86_FEATURE_SPLIT_LOCK_DETECT)) {
 			pr_info("#AC: crashing the kernel on kernel split_locks and warning on user-space split_locks\n");
-		else if (boot_cpu_has(X86_FEATURE_BUS_LOCK_DETECT))
+			if (cpuhp_setup_state(CPUHP_AP_ONLINE_DYN,
+					      "x86/splitlock", NULL, splitlock_cpu_offline) < 0)
+				pr_warn("No splitlock CPU offline handler\n");
+		} else if (boot_cpu_has(X86_FEATURE_BUS_LOCK_DETECT)) {
 			pr_info("#DB: warning on user-space bus_locks\n");
+		}
 		break;
 	case sld_fatal:
 		if (boot_cpu_has(X86_FEATURE_SPLIT_LOCK_DETECT)) {
include/linux/sched.h +3 -0
index 75ba8aa60248..ffa7166e23d6 100644
@@ -938,6 +938,9 @@ struct task_struct {
 	/* Recursion prevention for eventfd_signal() */
 	unsigned			in_eventfd_signal:1;
 #endif
+#ifdef	CONFIG_CPU_SUP_INTEL
+	unsigned			reported_split_lock:1;
+#endif
 
 	unsigned long			atomic_flags; /* Flags requiring atomic access. */
 
kernel/fork.c +5 -0
index f1e89007f228..085d68d143b2 100644
@@ -970,6 +970,11 @@ static struct task_struct *dup_task_struct(struct task_struct *orig, int node)
 #ifdef CONFIG_MEMCG
 	tsk->active_memcg = NULL;
 #endif
+
+#ifdef CONFIG_CPU_SUP_INTEL
+	tsk->reported_split_lock = 0;
+#endif
+
 	return tsk;
 
 free_stack:
Signature · 1 line
2.35.1
#7 lore raw

Hi!

Quoted 8 lines

In https://lore.kernel.org/all/87y22uujkm.ffs@tglx/ Thomas said:

Its's simply wishful thinking that stuff gets fixed because of a WARN_ONCE(). This has never worked. The only thing which works is to make stuff fail hard or slow it down in a way which makes it annoying enough to users to complain.

Quoted 8 lines

He was talking about WBINVD. But it made me think about how we use the split lock detection feature in Linux.

Existing code has three options for applications:
1) Don't enable split lock detection (allow arbitrary split locks)
2) Warn once when a process uses split lock, but let the process keep running with split lock detection disabled
3) Kill process that use split locks

I'm not sure what split locks are, and if you want applications to stop doing that maybe documentation would help.

Anyway, you can't really introduce regressions to userspace to "get stuff fixed" in applications.
Pavel

Signature · 2 lines
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
author
#8 lore raw

Pavel,

Quoted 2 lines

I'm not sure what split locks are, and if you want applications to stop doing that maybe documentation would help.

See existing Documentation/x86/buslock.rst

Quoted 2 lines

Anyway, you can't really introduce regressions to userspace to "get stuff fixed" in applications.

Applications can inflict pain on the system with atomic operations on unaligned operands that cross cache line boundaries. This is just pushing some pain back to the applications.

An alternate title for this patch series could have been:

"Split-locks: The OS strikes back"

Note that there are few applications that actually split locks. Normal compiler alignment rules generally avoid them. Applications that run on non-x86 architectures have to avoid them because few others allow atomic operations on unaligned operands.

-Tony

#9 lore raw
In reply to Pavel Machek
Quoted 11 lines · Pavel Machek
Quoted 11 lines

In https://lore.kernel.org/all/87y22uujkm.ffs@tglx/ Thomas said:

Its's simply wishful thinking that stuff gets fixed because of a WARN_ONCE(). This has never worked. The only thing which works is to make stuff fail hard or slow it down in a way which makes it annoying enough to users to complain.

He was talking about WBINVD. But it made me think about how we use the split lock detection feature in Linux.

Quoted 8 lines
Quoted 5 lines

Existing code has three options for applications:
1) Don't enable split lock detection (allow arbitrary split locks)
2) Warn once when a process uses split lock, but let the process keep running with split lock detection disabled
3) Kill process that use split locks

I'm not sure what split locks are, and if you want applications to stop doing that maybe documentation would help.

Split locks are lock prefixed operations which cross a cache line boundary. The way how they are implemented is taking the bus lock, which is the largest serialization hammer.

Bus locks are also triggered by lock prefixed operations on uncached memory and on MMIO.

Quoted 2 lines

Anyway, you can't really introduce regressions to userspace to "get stuff fixed" in applications.

Split locks can be triggered by unpriviledged user space and can be used to run a local DoS attack. A very effective DoS to be clear.

We have no indication whether a process is malicious or just doing stupid things. The only reason to not kill the offending process instantly is that there can be legacy binary only executables which trigger that due to stupidity.

But that opens up DoS at the same time. So the only way to "protect" against that is to slow down the freqeuncy of buslocks unconditionally. If you don't like that after analysing the situation you can turn split lock detection off.

The only binary I've seen so far triggering this, is some stoneage "value add" blob from HP which is also doing totally nuts other things.

Thanks,

tglx

#10 lore raw

From: Thomas Gleixner

Quoted 41 lines

Sent: 17 March 2022 18:07

Quoted 11 lines · Pavel Machek
Quoted 11 lines

In https://lore.kernel.org/all/87y22uujkm.ffs@tglx/ Thomas said:

Its's simply wishful thinking that stuff gets fixed because of a WARN_ONCE(). This has never worked. The only thing which works is to make stuff fail hard or slow it down in a way which makes it annoying enough to users to complain.

He was talking about WBINVD. But it made me think about how we use the split lock detection feature in Linux.

Quoted 8 lines
Quoted 5 lines

Existing code has three options for applications:
1) Don't enable split lock detection (allow arbitrary split locks)
2) Warn once when a process uses split lock, but let the process keep running with split lock detection disabled
3) Kill process that use split locks

I'm not sure what split locks are, and if you want applications to stop doing that maybe documentation would help.

Split locks are lock prefixed operations which cross a cache line boundary. The way how they are implemented is taking the bus lock, which is the largest serialization hammer.

Bus locks are also triggered by lock prefixed operations on uncached memory and on MMIO.

Quoted 2 lines

Anyway, you can't really introduce regressions to userspace to "get stuff fixed" in applications.

Split locks can be triggered by unpriviledged user space and can be used to run a local DoS attack. A very effective DoS to be clear.

We have no indication whether a process is malicious or just doing stupid things. The only reason to not kill the offending process instantly is that there can be legacy binary only executables which trigger that due to stupidity.

Quoted 7 lines

But that opens up DoS at the same time. So the only way to "protect" against that is to slow down the freqeuncy of buslocks unconditionally. If you don't like that after analysing the situation you can turn split lock detection off.

The only binary I've seen so far triggering this, is some stoneage "value add" blob from HP which is also doing totally nuts other things.

They are actually more likely to happen in the kernel when code casts int[] to long[] and then uses the 'BIT' functions to set/clear bits - which do locked operations.
Quite often then don't need the locks anyway.
And that cast is surprisingly common and completely broken on BE.

David

-
Registered Address Lakeside, Bramley Road, Mount Farm, Milton Keynes, MK1 1PT, UK Registration No: 1397386 (Wales)

author
#11 lore raw
Quoted 5 lines

They are actually more likely to happen in the kernel when code casts int[] to long[] and then uses the 'BIT' functions to set/clear bits - which do locked operations.
Quite often then don't need the locks anyway.
And that cast is surprisingly common and completely broken on BE.

Default split lock mode is "kernel dies". We had to fix up a dozen or so places (mostly involving set_bit/clr_bit as you describe). But all Ice Lake. Tiger Lake and Alder Lake systems are running in that mode ... and we haven't heard of widespread death (or disabling the boot option).

-Tony

#12 lore raw
Quoted 11 lines · Tony
Quoted 5 lines

They are actually more likely to happen in the kernel when code casts int[] to long[] and then uses the 'BIT' functions to set/clear bits - which do locked operations.
Quite often then don't need the locks anyway.
And that cast is surprisingly common and completely broken on BE.

Default split lock mode is "kernel dies". We had to fix up a dozen or so places (mostly involving set_bit/clr_bit as you describe). But all Ice Lake. Tiger Lake and Alder Lake systems are running in that mode ... and we haven't heard of widespread death (or disabling the boot option).

Split lock is designed to report this kind of "hidden" performance issues. After initial fix up wave, it has been sparse to find any legacy split lock issue in the kernel.

If a new split lock issue is introduced, the developer hopefully will capture and fix it before upstream. So others won't see it any more.

Thanks.

-Fenghua

merge bot Applied
#13 lore raw
In reply to Tony Luck
The following commit has been merged into the x86/splitlock branch of tip:

The following commit has been merged into the x86/splitlock branch of tip:

Commit-ID:     b041b525dab95352fbd666b14dc73ab898df465f
Gitweb:        https://git.kernel.org/tip/b041b525dab95352fbd666b14dc73ab898df465f
Author:        Tony Luck <[email protected]>
AuthorDate:    Thu, 10 Mar 2022 12:48:53 -08:00
Committer:     Thomas Gleixner <[email protected]>
CommitterDate: Wed, 27 Apr 2022 15:43:38 +02:00

x86/split_lock: Make life miserable for split lockers

In https://lore.kernel.org/all/87y22uujkm.ffs@tglx/ Thomas said:

Its's simply wishful thinking that stuff gets fixed because of a WARN_ONCE(). This has never worked. The only thing which works is to make stuff fail hard or slow it down in a way which makes it annoying enough to users to complain.

He was talking about WBINVD. But it made me think about how we use the split lock detection feature in Linux.

Existing code has three options for applications:

1) Don't enable split lock detection (allow arbitrary split locks)
2) Warn once when a process uses split lock, but let the process keep running with split lock detection disabled
3) Kill process that use split locks

Option 2 falls into the "wishful thinking" territory that Thomas warns does nothing. But option 3 might not be viable in a situation with legacy applications that need to run.

Hence make option 2 much stricter to "slow it down in a way which makes it annoying".

Primary reason for this change is to provide better quality of service to the rest of the applications running on the system. Internal testing shows that even with many processes splitting locks, performance for the rest of the system is much more responsive.

The new "warn" mode operates like this. When an application tries to execute a bus lock the #AC handler.

1) Delays (interruptibly) 10 ms before moving to next step.

2) Blocks (interruptibly) until it can get the semaphore If interrupted, just return. Assume the signal will either kill the task, or direct execution away from the instruction that is trying to get the bus lock.
3) Disables split lock detection for the current core
4) Schedules a work queue to re-enable split lock detect in 2 jiffies
5) Returns

The work queue that re-enables split lock detection also releases the semaphore.

There is a corner case where a CPU may be taken offline while split lock detection is disabled. A CPU hotplug handler handles this case.

Old behaviour was to only print the split lock warning on the first occurrence of a split lock from a task. Preserve that by adding a flag to the task structure that suppresses subsequent split lock messages from that task.

---
 arch/x86/kernel/cpu/intel.c | 63 ++++++++++++++++++++++++++++++------
 include/linux/sched.h       |  3 ++-
 kernel/fork.c               |  5 +++-
 3 files changed, 61 insertions(+), 10 deletions(-)
arch/x86/kernel/cpu/intel.c +53 -10
index f7a5370..be2a0bd 100644
@@ -7,10 +7,13 @@
 #include <linux/smp.h>
 #include <linux/sched.h>
 #include <linux/sched/clock.h>
+#include <linux/semaphore.h>
 #include <linux/thread_info.h>
 #include <linux/init.h>
 #include <linux/uaccess.h>
+#include <linux/workqueue.h>
 #include <linux/delay.h>
+#include <linux/cpuhotplug.h>
 
 #include <asm/cpufeature.h>
 #include <asm/msr.h>
@@ -999,6 +1002,8 @@ static const struct {
 
 static struct ratelimit_state bld_ratelimit;
 
+static DEFINE_SEMAPHORE(buslock_sem);
+
 static inline bool match_option(const char *arg, int arglen, const char *opt)
 {
 	int len = strlen(opt), ratelimit;
@@ -1109,18 +1114,52 @@ static void split_lock_init(void)
 		split_lock_verify_msr(sld_state != sld_off);
 }
 
+static void __split_lock_reenable(struct work_struct *work)
+{
+	sld_update_msr(true);
+	up(&buslock_sem);
+}
+
+/*
+ * If a CPU goes offline with pending delayed work to re-enable split lock
+ * detection then the delayed work will be executed on some other CPU. That
+ * handles releasing the buslock_sem, but because it executes on a
+ * different CPU probably won't re-enable split lock detection. This is a
+ * problem on HT systems since the sibling CPU on the same core may then be
+ * left running with split lock detection disabled.
+ *
+ * Unconditionally re-enable detection here.
+ */
+static int splitlock_cpu_offline(unsigned int cpu)
+{
+	sld_update_msr(true);
+
+	return 0;
+}
+
+static DECLARE_DELAYED_WORK(split_lock_reenable, __split_lock_reenable);
+
 static void split_lock_warn(unsigned long ip)
 {
-	pr_warn_ratelimited("#AC: %s/%d took a split_lock trap at address: 0x%lx\n",
-			    current->comm, current->pid, ip);
+	int cpu;
 
-	/*
-	 * Disable the split lock detection for this task so it can make
-	 * progress and set TIF_SLD so the detection is re-enabled via
-	 * switch_to_sld() when the task is scheduled out.
-	 */
+	if (!current->reported_split_lock)
+		pr_warn_ratelimited("#AC: %s/%d took a split_lock trap at address: 0x%lx\n",
+				    current->comm, current->pid, ip);
+	current->reported_split_lock = 1;
+
+	/* misery factor #1, sleep 10ms before trying to execute split lock */
+	if (msleep_interruptible(10) > 0)
+		return;
+	/* Misery factor #2, only allow one buslocked disabled core at a time */
+	if (down_interruptible(&buslock_sem) == -EINTR)
+		return;
+	cpu = get_cpu();
+	schedule_delayed_work_on(cpu, &split_lock_reenable, 2);
+
+	/* Disable split lock detection on this CPU to make progress */
 	sld_update_msr(false);
-	set_tsk_thread_flag(current, TIF_SLD);
+	put_cpu();
 }
 
 bool handle_guest_split_lock(unsigned long ip)
@@ -1274,10 +1313,14 @@ static void sld_state_show(void)
 		pr_info("disabled\n");
 		break;
 	case sld_warn:
-		if (boot_cpu_has(X86_FEATURE_SPLIT_LOCK_DETECT))
+		if (boot_cpu_has(X86_FEATURE_SPLIT_LOCK_DETECT)) {
 			pr_info("#AC: crashing the kernel on kernel split_locks and warning on user-space split_locks\n");
-		else if (boot_cpu_has(X86_FEATURE_BUS_LOCK_DETECT))
+			if (cpuhp_setup_state(CPUHP_AP_ONLINE_DYN,
+					      "x86/splitlock", NULL, splitlock_cpu_offline) < 0)
+				pr_warn("No splitlock CPU offline handler\n");
+		} else if (boot_cpu_has(X86_FEATURE_BUS_LOCK_DETECT)) {
 			pr_info("#DB: warning on user-space bus_locks\n");
+		}
 		break;
 	case sld_fatal:
 		if (boot_cpu_has(X86_FEATURE_SPLIT_LOCK_DETECT)) {
include/linux/sched.h +3 -0
index a8911b1..23e03c7 100644
@@ -941,6 +941,9 @@ struct task_struct {
 #ifdef CONFIG_IOMMU_SVA
 	unsigned			pasid_activated:1;
 #endif
+#ifdef	CONFIG_CPU_SUP_INTEL
+	unsigned			reported_split_lock:1;
+#endif
 
 	unsigned long			atomic_flags; /* Flags requiring atomic access. */
 
kernel/fork.c +5 -0
index 9796897..f39795f 100644
@@ -1045,6 +1045,11 @@ static struct task_struct *dup_task_struct(struct task_struct *orig, int node)
 #ifdef CONFIG_MEMCG
 	tsk->active_memcg = NULL;
 #endif
+
+#ifdef CONFIG_CPU_SUP_INTEL
+	tsk->reported_split_lock = 0;
+#endif
+
 	return tsk;
 
 free_stack:
author
#14 lore raw

PATCH v2 2/2 x86/split-lock: Remove unused TIF_SLD bit

In reply to Tony Luck

Changes to the "warn" mode of split lock handling mean that TIF_SLD is never set.

Remove the bit, and the functions that use it.

---
 arch/x86/include/asm/cpu.h         |  2 --
 arch/x86/include/asm/thread_info.h |  4 +---
 arch/x86/kernel/cpu/intel.c        | 12 ------------
 arch/x86/kernel/process.c          |  3 ---
 4 files changed, 1 insertion(+), 20 deletions(-)
arch/x86/include/asm/cpu.h +0 -2
index 33d41e350c79..e346f5c103b7 100644
@@ -42,14 +42,12 @@ unsigned int x86_model(unsigned int sig);
 unsigned int x86_stepping(unsigned int sig);
 #ifdef CONFIG_CPU_SUP_INTEL
 extern void __init sld_setup(struct cpuinfo_x86 *c);
-extern void switch_to_sld(unsigned long tifn);
 extern bool handle_user_split_lock(struct pt_regs *regs, long error_code);
 extern bool handle_guest_split_lock(unsigned long ip);
 extern void handle_bus_lock(struct pt_regs *regs);
 u8 get_this_hybrid_cpu_type(void);
 #else
 static inline void __init sld_setup(struct cpuinfo_x86 *c) {}
-static inline void switch_to_sld(unsigned long tifn) {}
 static inline bool handle_user_split_lock(struct pt_regs *regs, long error_code)
 {
 	return false;
arch/x86/include/asm/thread_info.h +1 -3
index ebec69c35e95..f0cb881c1d69 100644
@@ -92,7 +92,6 @@ struct thread_info {
 #define TIF_NOCPUID		15	/* CPUID is not accessible in userland */
 #define TIF_NOTSC		16	/* TSC is not accessible in userland */
 #define TIF_NOTIFY_SIGNAL	17	/* signal notifications exist */
-#define TIF_SLD			18	/* Restore split lock detection on context switch */
 #define TIF_MEMDIE		20	/* is terminating due to OOM killer */
 #define TIF_POLLING_NRFLAG	21	/* idle is polling for TIF_NEED_RESCHED */
 #define TIF_IO_BITMAP		22	/* uses I/O bitmap */
@@ -116,7 +115,6 @@ struct thread_info {
 #define _TIF_NOCPUID		(1 << TIF_NOCPUID)
 #define _TIF_NOTSC		(1 << TIF_NOTSC)
 #define _TIF_NOTIFY_SIGNAL	(1 << TIF_NOTIFY_SIGNAL)
-#define _TIF_SLD		(1 << TIF_SLD)
 #define _TIF_POLLING_NRFLAG	(1 << TIF_POLLING_NRFLAG)
 #define _TIF_IO_BITMAP		(1 << TIF_IO_BITMAP)
 #define _TIF_SPEC_FORCE_UPDATE	(1 << TIF_SPEC_FORCE_UPDATE)
@@ -128,7 +126,7 @@ struct thread_info {
 /* flags to check in __switch_to() */
 #define _TIF_WORK_CTXSW_BASE					\
 	(_TIF_NOCPUID | _TIF_NOTSC | _TIF_BLOCKSTEP |		\
-	 _TIF_SSBD | _TIF_SPEC_FORCE_UPDATE | _TIF_SLD)
+	 _TIF_SSBD | _TIF_SPEC_FORCE_UPDATE)
 
 /*
  * Avoid calls to __switch_to_xtra() on UP as STIBP is not evaluated.
arch/x86/kernel/cpu/intel.c +0 -12
index 2536784511e3..7cba84616c20 100644
@@ -1241,18 +1241,6 @@ void handle_bus_lock(struct pt_regs *regs)
 	}
 }
 
-/*
- * This function is called only when switching between tasks with
- * different split-lock detection modes. It sets the MSR for the
- * mode of the new task. This is right most of the time, but since
- * the MSR is shared by hyperthreads on a physical core there can
- * be glitches when the two threads need different modes.
- */
-void switch_to_sld(unsigned long tifn)
-{
-	sld_update_msr(!(tifn & _TIF_SLD));
-}
-
 /*
  * Bits in the IA32_CORE_CAPABILITIES are not architectural, so they should
  * only be trusted if it is confirmed that a CPU model implements a
arch/x86/kernel/process.c +0 -3
index 81d8ef036637..47db777da92a 100644
@@ -686,9 +686,6 @@ void __switch_to_xtra(struct task_struct *prev_p, struct task_struct *next_p)
 		/* Enforce MSR update to ensure consistent state */
 		__speculation_ctrl_update(~tifn, tifn);
 	}
-
-	if ((tifp ^ tifn) & _TIF_SLD)
-		switch_to_sld(tifn);
 }
 
 /*
Signature · 1 line
2.35.1
merge bot Applied
#15 lore raw

[tip: x86/splitlock] x86/split-lock: Remove unused TIF_SLD bit

The following commit has been merged into the x86/splitlock branch of tip:

The following commit has been merged into the x86/splitlock branch of tip:

Commit-ID:     ef79970d7ccdc4e8855aa6079fc2f4797a6807fb
Gitweb:        https://git.kernel.org/tip/ef79970d7ccdc4e8855aa6079fc2f4797a6807fb
Author:        Tony Luck <[email protected]>
AuthorDate:    Thu, 10 Mar 2022 12:48:54 -08:00
Committer:     Thomas Gleixner <[email protected]>
CommitterDate: Wed, 27 Apr 2022 15:43:39 +02:00

x86/split-lock: Remove unused TIF_SLD bit

Changes to the "warn" mode of split lock handling mean that TIF_SLD is never set.

Remove the bit, and the functions that use it.

---
 arch/x86/include/asm/cpu.h         |  2 --
 arch/x86/include/asm/thread_info.h |  4 +---
 arch/x86/kernel/cpu/intel.c        | 12 ------------
 arch/x86/kernel/process.c          |  3 ---
 4 files changed, 1 insertion(+), 20 deletions(-)
arch/x86/include/asm/cpu.h +0 -2
index 86e5e4e..d1c86b2 100644
@@ -43,14 +43,12 @@ unsigned int x86_model(unsigned int sig);
 unsigned int x86_stepping(unsigned int sig);
 #ifdef CONFIG_CPU_SUP_INTEL
 extern void __init sld_setup(struct cpuinfo_x86 *c);
-extern void switch_to_sld(unsigned long tifn);
 extern bool handle_user_split_lock(struct pt_regs *regs, long error_code);
 extern bool handle_guest_split_lock(unsigned long ip);
 extern void handle_bus_lock(struct pt_regs *regs);
 u8 get_this_hybrid_cpu_type(void);
 #else
 static inline void __init sld_setup(struct cpuinfo_x86 *c) {}
-static inline void switch_to_sld(unsigned long tifn) {}
 static inline bool handle_user_split_lock(struct pt_regs *regs, long error_code)
 {
 	return false;
arch/x86/include/asm/thread_info.h +1 -3
index ebec69c..f0cb881 100644
@@ -92,7 +92,6 @@ struct thread_info {
 #define TIF_NOCPUID		15	/* CPUID is not accessible in userland */
 #define TIF_NOTSC		16	/* TSC is not accessible in userland */
 #define TIF_NOTIFY_SIGNAL	17	/* signal notifications exist */
-#define TIF_SLD			18	/* Restore split lock detection on context switch */
 #define TIF_MEMDIE		20	/* is terminating due to OOM killer */
 #define TIF_POLLING_NRFLAG	21	/* idle is polling for TIF_NEED_RESCHED */
 #define TIF_IO_BITMAP		22	/* uses I/O bitmap */
@@ -116,7 +115,6 @@ struct thread_info {
 #define _TIF_NOCPUID		(1 << TIF_NOCPUID)
 #define _TIF_NOTSC		(1 << TIF_NOTSC)
 #define _TIF_NOTIFY_SIGNAL	(1 << TIF_NOTIFY_SIGNAL)
-#define _TIF_SLD		(1 << TIF_SLD)
 #define _TIF_POLLING_NRFLAG	(1 << TIF_POLLING_NRFLAG)
 #define _TIF_IO_BITMAP		(1 << TIF_IO_BITMAP)
 #define _TIF_SPEC_FORCE_UPDATE	(1 << TIF_SPEC_FORCE_UPDATE)
@@ -128,7 +126,7 @@ struct thread_info {
 /* flags to check in __switch_to() */
 #define _TIF_WORK_CTXSW_BASE					\
 	(_TIF_NOCPUID | _TIF_NOTSC | _TIF_BLOCKSTEP |		\
-	 _TIF_SSBD | _TIF_SPEC_FORCE_UPDATE | _TIF_SLD)
+	 _TIF_SSBD | _TIF_SPEC_FORCE_UPDATE)
 
 /*
  * Avoid calls to __switch_to_xtra() on UP as STIBP is not evaluated.
arch/x86/kernel/cpu/intel.c +0 -12
index be2a0bd..672e253 100644
@@ -1233,18 +1233,6 @@ void handle_bus_lock(struct pt_regs *regs)
 }
 
 /*
- * This function is called only when switching between tasks with
- * different split-lock detection modes. It sets the MSR for the
- * mode of the new task. This is right most of the time, but since
- * the MSR is shared by hyperthreads on a physical core there can
- * be glitches when the two threads need different modes.
- */
-void switch_to_sld(unsigned long tifn)
-{
-	sld_update_msr(!(tifn & _TIF_SLD));
-}
-
-/*
  * Bits in the IA32_CORE_CAPABILITIES are not architectural, so they should
  * only be trusted if it is confirmed that a CPU model implements a
  * specific feature at a particular bit position.
arch/x86/kernel/process.c +0 -3
index b370767..bcc76c1 100644
@@ -686,9 +686,6 @@ void __switch_to_xtra(struct task_struct *prev_p, struct task_struct *next_p)
 		/* Enforce MSR update to ensure consistent state */
 		__speculation_ctrl_update(~tifn, tifn);
 	}
-
-	if ((tifp ^ tifn) & _TIF_SLD)
-		switch_to_sld(tifn);
 }
 
 /*