Skip to contentSkip to conversation

staging: pi433: Use div64_u64 instead of do_div

PATCH In review Kang Minchul 2 participants 3 messages Oct 19, 2022 Staging

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 staging: pi433: Use div64_u64 instead of do_div

This commit removes warning generated by cocci as follows:

do_div() does a 64-by-32 division, please consider using div64_u64 instead.

Using div64_u64 instead of do_div can avoid potential truncation.

---
 drivers/staging/pi433/rf69.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)
drivers/staging/pi433/rf69.c +4 -4
index 8c7fab6a46bb..683dd94489f9 100644
@@ -252,11 +252,11 @@ int rf69_set_deviation(struct spi_device *spi, u32 deviation)
 
 	// calculat f step
 	f_step = F_OSC * factor;
-	do_div(f_step, 524288); //  524288 = 2^19
+	div64_u64(f_step, 524288); //  524288 = 2^19
 
 	// calculate register settings
 	f_reg = deviation * factor;
-	do_div(f_reg, f_step);
+	div64_u64(f_reg, f_step);
 
 	msb = (f_reg & 0xff00) >> 8;
 	lsb = (f_reg & 0xff);
@@ -291,7 +291,7 @@ int rf69_set_frequency(struct spi_device *spi, u32 frequency)
 
 	// calculat f step
 	f_step = F_OSC * factor;
-	do_div(f_step, 524288); //  524288 = 2^19
+	div64_u64(f_step, 524288); //  524288 = 2^19
 
 	// check input value
 	f_max = div_u64(f_step * 8388608, factor);
@@ -302,7 +302,7 @@ int rf69_set_frequency(struct spi_device *spi, u32 frequency)
 
 	// calculate reg settings
 	f_reg = frequency * factor;
-	do_div(f_reg, f_step);
+	div64_u64(f_reg, f_step);
 
 	msb = (f_reg & 0xff0000) >> 16;
 	mid = (f_reg & 0xff00)   >>  8;
Signature · 1 line
2.34.1
#1 lore raw

From: Kang Minchul

Quoted 7 lines

Sent: 19 October 2022 10:40

This commit removes warning generated by cocci as follows:

do_div() does a 64-by-32 division, please consider using div64_u64 instead.

Using div64_u64 instead of do_div can avoid potential truncation.

Cocci is lying to you.

do_div() exists because a 64 by 32 bit divide is significantly faster than a 64 by 64 divide.
This is particularly true on 32bit cpu, but is also true on Intel x86_64 bit cpu.

So unless the result might actually be larger than 32 bits (which requires code analysis) then do_div() is correct.

David

-
Registered Address Lakeside, Bramley Road, Mount Farm, Milton Keynes, MK1 1PT, UK Registration No: 1397386 (Wales)

#2 lore raw

2022년 10월 19일 (수) 오후 7:31, David Laight <[email protected]>님이 작성:

Quoted 8 lines

From: Kang Minchul

Quoted 6 lines

Sent: 19 October 2022 10:40

This commit removes warning generated by cocci as follows:

do_div() does a 64-by-32 division, please consider using div64_u64 instead.

Quoted 8 lines
Quoted 1 line

Using div64_u64 instead of do_div can avoid potential truncation.

Cocci is lying to you.

do_div() exists because a 64 by 32 bit divide is significantly faster than a 64 by 64 divide.
This is particularly true on 32bit cpu, but is also true on Intel x86_64 bit cpu.

I guess I have missed that point,
Thanks for your feedback!

Kang Minchul