Skip to contentSkip to conversation

Add support for new SoC APM82XXX

PATCH Superseded tmarri at apm.com 1 participant 2 messages Sep 8, 2010

v3 of 7 Superseded Latest is v7 →

lore
Share & tools
lore
#0 lore raw

v3 cover Add support for new SoC APM82XXX

From: Tirumala Marri <[email protected]>

APM8XXXX is Applied Micro Circuits Corporations naming convention for new line of SoCs.

V1:
* Squash some of the patches.
* add space between "||" and "\".
* Add spaces around operators.
* Unsigned int to u32.
* Add empty line which was removed.
* remove warning "unused variable" in cpu_init.c
* Remove "All rights reserved" phrase from headers.
* Add empty line which was removed.
* Move EBC definititions to bluestone_config.h file
* Remove reconfigure_EBC() function.
* Remove unused CONFIG_SDRAM16BIT_OFFSET.
* Remove unused CONFIG_SDRAM_INFO_EEPROM_ADDR.
* Add empty lines in bluestone.c file.
* Replacing AC_R | AC_W | AC_X with AC_RWX.
* Remove changes to main Makefile
* Remove NAND references from config file.
* Squash some of the patches.
* Remove top Makefile change.

V2:
* Missing space before "<".
* SDR_AHB_CFG not used, remove.
* boot device dfinitions are board specific ? removed.
* APM82161_MASK not used, remove
* set_mcsr() is already called in ddr init, no need to call here.
* removed finding bootdevice function which is not used.
* Add spaces in tlbentry() function.
* Board early init function is empty remove.
* Remove CONFIG_SYS_EXTSRAM_BASE.
* Set CONFIG_SYS_FLASH_SIZE to 4MB
* Remove CONFIG_SIZE_REDUCE & CONFIG_SECTOR_REDUCE.
* Spaces around " >> " .
* Correct the phy name CONFIG_M88E1111_PHY to CONFIG_RTL8211CL_PHY.
* Removed Defines added to 405ex.

V3:
* Missing TLB entry for CONFIG_SYS_BOOT_BASE_ADDR.
* Correct multiline comment.
* Move CONFIG_SYS_EBC_PB0AP etc to EBC area in the config file.
* remove unused CONFIG_RTL8211CL_PHY.
* Replace hard coded valued for CONFIG_SYS_EBC_CFG with macro definitions.
* board.cfg add the entry in sorted.
* use puts() if there is no formating needed.
* Change APM82XXX to APM821XX
* Modify the way cpu id is printed.
* Correct inadvertent change.
* Sort define list.
* Remove comment for get_sys_info().
* Define a symbolic constat ISRAM1_OCM_SIZE.
* Create apm821xx.h instead of using ppc440.h

Tirumala Marri (2):
APM821xx: Add CPU support
APM821xx: Add bluestone board support

 MAINTAINERS                             |    3 +
 MAKEALL                                 |    1 +
 arch/powerpc/cpu/ppc4xx/cpu.c           |   36 ++-
 arch/powerpc/cpu/ppc4xx/cpu_init.c      |    5 +-
 arch/powerpc/cpu/ppc4xx/speed.c         |   76 +++++-
 arch/powerpc/cpu/ppc4xx/start.S         |   11 +-
 arch/powerpc/cpu/ppc4xx/tlb.c           |    2 +
 arch/powerpc/include/asm/ppc4xx-ebc.h   |    4 +
 arch/powerpc/include/asm/ppc4xx-isram.h |   14 +-
 arch/powerpc/include/asm/ppc4xx-sdram.h |   12 +-
 arch/powerpc/include/asm/ppc4xx-uic.h   |    5 +-
 arch/powerpc/include/asm/processor.h    |    1 +
 board/amcc/bluestone/Makefile           |   52 ++++
 board/amcc/bluestone/bluestone.c        |  111 +++++++
 board/amcc/bluestone/config.mk          |   40 +++
 board/amcc/bluestone/init.S             |   59 ++++
 boards.cfg                              |    1 +
 include/apm821xx.h                      |  493 +++++++++++++++++++++++++++++++
 include/configs/bluestone.h             |  175 +++++++++++
 include/ppc4xx.h                        |   11 +-
 20 files changed, 1087 insertions(+), 25 deletions(-)
 create mode 100644 board/amcc/bluestone/Makefile
 create mode 100644 board/amcc/bluestone/bluestone.c
 create mode 100644 board/amcc/bluestone/config.mk
 create mode 100644 board/amcc/bluestone/init.S
 create mode 100644 include/apm821xx.h
 create mode 100644 include/configs/bluestone.h
#1 lore raw

v3 cover Add support for new SoC APM82XXX

Please ignore this series. I missed "PATCH" string. I will resend the correct patch set.
--Marri

Quoted 97 lines

-----Original Message-----
From: tmarri at apm.com [mailto:tmarri at apm.com]
Sent: Tuesday, September 07, 2010 5:19 PM
To: u-boot at lists.denx.de
Cc: sr at denx.de; Tirumala Marri
Subject: [v3 0/2] Add support for new SoC APM82XXX

From: Tirumala Marri <[email protected]>

APM8XXXX is Applied Micro Circuits Corporations naming convention for new line of SoCs.

V1:
* Squash some of the patches.
* add space between "||" and "\".
* Add spaces around operators.
* Unsigned int to u32.
* Add empty line which was removed.
* remove warning "unused variable" in cpu_init.c
* Remove "All rights reserved" phrase from headers.
* Add empty line which was removed.
* Move EBC definititions to bluestone_config.h file
* Remove reconfigure_EBC() function.
* Remove unused CONFIG_SDRAM16BIT_OFFSET.
* Remove unused CONFIG_SDRAM_INFO_EEPROM_ADDR.
* Add empty lines in bluestone.c file.
* Replacing AC_R | AC_W | AC_X with AC_RWX.
* Remove changes to main Makefile
* Remove NAND references from config file.
* Squash some of the patches.
* Remove top Makefile change.

V2:
* Missing space before "<".
* SDR_AHB_CFG not used, remove.
* boot device dfinitions are board specific ? removed.
* APM82161_MASK not used, remove
* set_mcsr() is already called in ddr init, no need to call here.
* removed finding bootdevice function which is not used.
* Add spaces in tlbentry() function.
* Board early init function is empty remove.
* Remove CONFIG_SYS_EXTSRAM_BASE.
* Set CONFIG_SYS_FLASH_SIZE to 4MB
* Remove CONFIG_SIZE_REDUCE & CONFIG_SECTOR_REDUCE.
* Spaces around " >> " .
* Correct the phy name CONFIG_M88E1111_PHY to CONFIG_RTL8211CL_PHY.
* Removed Defines added to 405ex.

V3:
* Missing TLB entry for CONFIG_SYS_BOOT_BASE_ADDR.
* Correct multiline comment.
* Move CONFIG_SYS_EBC_PB0AP etc to EBC area in the config file.
* remove unused CONFIG_RTL8211CL_PHY.
* Replace hard coded valued for CONFIG_SYS_EBC_CFG with macro definitions.
* board.cfg add the entry in sorted.
* use puts() if there is no formating needed.
* Change APM82XXX to APM821XX
* Modify the way cpu id is printed.
* Correct inadvertent change.
* Sort define list.
* Remove comment for get_sys_info().
* Define a symbolic constat ISRAM1_OCM_SIZE.
* Create apm821xx.h instead of using ppc440.h

Tirumala Marri (2):
APM821xx: Add CPU support
APM821xx: Add bluestone board support

 MAINTAINERS                             |    3 +
 MAKEALL                                 |    1 +
 arch/powerpc/cpu/ppc4xx/cpu.c           |   36 ++-
 arch/powerpc/cpu/ppc4xx/cpu_init.c      |    5 +-
 arch/powerpc/cpu/ppc4xx/speed.c         |   76 +++++-
 arch/powerpc/cpu/ppc4xx/start.S         |   11 +-
 arch/powerpc/cpu/ppc4xx/tlb.c           |    2 +
 arch/powerpc/include/asm/ppc4xx-ebc.h   |    4 +
 arch/powerpc/include/asm/ppc4xx-isram.h |   14 +-
 arch/powerpc/include/asm/ppc4xx-sdram.h |   12 +-
 arch/powerpc/include/asm/ppc4xx-uic.h   |    5 +-
 arch/powerpc/include/asm/processor.h    |    1 +
 board/amcc/bluestone/Makefile           |   52 ++++
 board/amcc/bluestone/bluestone.c        |  111 +++++++
 board/amcc/bluestone/config.mk          |   40 +++
 board/amcc/bluestone/init.S             |   59 ++++
 boards.cfg                              |    1 +
 include/apm821xx.h                      |  493
+++++++++++++++++++++++++++++++
 include/configs/bluestone.h             |  175 +++++++++++
 include/ppc4xx.h                        |   11 +-
 20 files changed, 1087 insertions(+), 25 deletions(-)
 create mode 100644 board/amcc/bluestone/Makefile
 create mode 100644 board/amcc/bluestone/bluestone.c
 create mode 100644 board/amcc/bluestone/config.mk
 create mode 100644 board/amcc/bluestone/init.S
 create mode 100644 include/apm821xx.h
 create mode 100644 include/configs/bluestone.h