rootfs-postcommands.bbclass: fix echo + '\n' in 'no password' banner
PATCH v5 1/2 rootfs-postcommands.bbclass: fix echo + '\n' in 'no password' banner
From: Chen Qi <[email protected]>
The '\n' means hostname instead of new line in /etc/issues.
bash and dash have different behavior on echo + '\n'. So we avoid this '\n' and use an extra echo "" instead.
--- meta/classes-recipe/rootfs-postcommands.bbclass | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
meta/classes-recipe/rootfs-postcommands.bbclass +2 -1
@@ -259,7 +259,8 @@ zap_empty_root_password () { # This function adds a note to the login banner that the system is configured for root logins without password # add_empty_root_password_note () { - echo "Type 'root' to login with superuser privileges (no password will be asked).\n" >> ${IMAGE_ROOTFS}/etc/issue + echo "Type 'root' to login with superuser privileges (no password will be asked)." >> ${IMAGE_ROOTFS}/etc/issue + echo "" >> ${IMAGE_ROOTFS}/etc/issue } #
Signature · 1 line
2.43.0
PATCH v5 2/2 rootfs-postcommands.bbclass: fix adding 'no password' banner
From: Chen Qi <[email protected]>
It's possible that users use EXTRA_USERS_PARAMS to set password for root or explicitly expire root password. So we need to check these two cases to ensure the 'no password' banner is not misleading.
As an example, below are configurations to make an image requiring setting a root password on first boot, but without having to first enter a static initial password:
In conf/toolcfg.cfg:
OE_FRAGMENTS += "distro/poky core/yocto/root-login-with-empty-password In local.conf:
INHERIT += "extrausers"
EXTRA_USERS_PARAMS += " passwd-expire root;"
Checking and adding such a banner is ensured to run as last steps of ROOTFS_POSTPROCESS_COMMAND, regardless of IMAGE_FEATURES. In particualr, we want to ensure that the function runs after set_user_group function from extrausers.bbclass. So unlike other commands in this bbclass using the '+=', this function uses ':append'.
Besides, adding such banner is only meaningful when base-passwd and baes-files are installed. In case of container image, they might not be installed (e.g., container-test-image). So add extra checking for it. With the above logic, we avoid breaking the following oe-selftest test case:
containerimage.ContainerImageTests.test_expected_files
--- meta/classes-recipe/rootfs-postcommands.bbclass | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-)
meta/classes-recipe/rootfs-postcommands.bbclass +13 -3
@@ -5,7 +5,7 @@ # # Zap the root password if empty-root-password feature is not enabled -ROOTFS_POSTPROCESS_COMMAND += '${@bb.utils.contains("IMAGE_FEATURES", "empty-root-password", "add_empty_root_password_note", "zap_empty_root_password ",d)}' +ROOTFS_POSTPROCESS_COMMAND += '${@bb.utils.contains("IMAGE_FEATURES", "empty-root-password", "", "zap_empty_root_password ",d)}' # Allow dropbear/openssh to accept logins from accounts with an empty password string if allow-empty-password is enabled ROOTFS_POSTPROCESS_COMMAND += '${@bb.utils.contains("IMAGE_FEATURES", "allow-empty-password", "ssh_allow_empty_password ", "",d)}'
@@ -64,6 +64,10 @@ ROOTFS_POSTPROCESS_COMMAND += '${SORT_PASSWD_POSTPROCESS_COMMAND}' # ROOTFS_POSTPROCESS_COMMAND += 'rootfs_reproducible' +# Check and add 'no root password' banner. +# This needs to done at the end of ROOTFS_POSTPROCESS_COMMAND, thus using :append. +ROOTFS_POSTPROCESS_COMMAND:append = " add_empty_root_password_note" + # Resolve the ID as described in the sysusers.d(5) manual: ID can be a numeric # uid, a couple uid:gid or uid:groupname or it is '-' meaning leaving it # automatic or it can be a path. In the latter, the uid/gid matches the
@@ -259,8 +263,14 @@ zap_empty_root_password () { # This function adds a note to the login banner that the system is configured for root logins without password # add_empty_root_password_note () { - echo "Type 'root' to login with superuser privileges (no password will be asked)." >> ${IMAGE_ROOTFS}/etc/issue - echo "" >> ${IMAGE_ROOTFS}/etc/issue + if [ -e ${IMAGE_ROOTFS}/etc/shadow -a -e ${IMAGE_ROOTFS}/etc/issue ]; then + rootpw="`grep '^root:' ${IMAGE_ROOTFS}/etc/shadow | cut -d':' -f2`" + rootpw_lastchanged="`grep "^root:" ${IMAGE_ROOTFS}/etc/shadow | cut -d: -f3`" + if [ -z "$rootpw" -a "$rootpw_lastchanged" != "0" ]; then + echo "Type 'root' to login with superuser privileges (no password will be asked)." >> ${IMAGE_ROOTFS}/etc/issue + echo "" >> ${IMAGE_ROOTFS}/etc/issue + fi + fi } #
Signature · 1 line
2.43.0
Re: [OE-core][PATCH V5 2/2] rootfs-postcommands.bbclass: fix adding 'no password' banner
Quoted 47 lines · On Thu, 2025-12-04 at 08:32 +0000, [email protected] wrote:
From: Chen Qi <[email protected]>
It's possible that users use
EXTRA_USERS_PARAMSto set password for root or explicitly expire root password. So we need to check these two cases to ensure the 'no password' banner is not misleading.As an example, below are configurations to make an image requiring setting a root password on first boot, but without having to first enter a static initial password:
In conf/toolcfg.cfg:
OE_FRAGMENTS+= "distro/poky core/yocto/root-login-with-empty-password In local.conf:
INHERIT += "extrausers"
EXTRA_USERS_PARAMS+= " passwd-expire root;"Checking and adding such a banner is ensured to run as last steps of
ROOTFS_POSTPROCESS_COMMAND, regardless ofIMAGE_FEATURES. In particualr, we want to ensure that the function runs afterset_user_groupfunction from extrausers.bbclass. So unlike other commands in this bbclass using the '+=', this function uses ':append'.Besides, adding such banner is only meaningful when base-passwd and baes-files are installed. In case of container image, they might not be installed (e.g., container-test-image). So add extra checking for it. With the above logic, we avoid breaking the following oe-selftest test case:
containerimage.ContainerImageTests.test_expected_filesSigned-off-by Chen Qi <[email protected]>--- meta/classes-recipe/rootfs-postcommands.bbclass | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-)meta/classes-recipe/rootfs-postcommands.bbclass +1
-1@@ -5,7 +5,7 @@ # # Zap the root password if empty-root-password feature is not enabled -ROOTFS_POSTPROCESS_COMMAND += '${@bb.utils.contains("IMAGE_FEATURES", "empty-root-password", "add_empty_root_password_note", "zap_empty_root_password ",d)}' +ROOTFS_POSTPROCESS_COMMAND += '${@bb.utils.contains("IMAGE_FEATURES", "empty-root-password", "", "zap_empty_root_password ",d)}' # Allow dropbear/openssh to accept logins from accounts with an empty password string if allow-empty-password is enabled ROOTFS_POSTPROCESS_COMMAND += '${@bb.utils.contains("IMAGE_FEATURES", "allow-empty-password", "ssh_allow_empty_password ", "",d)}'
meta/classes-recipe/rootfs-postcommands.bbclass ROOTFS_POSTPROCESS_COMMAND += '${SORT_PASSWD_POSTPROCESS_COMMAND}' · line 69
Quoted 6 lines
meta/classes-recipe/rootfs-postcommands.bbclass +3
-0@@ -64,6 +64,10 @@ ROOTFS_POSTPROCESS_COMMAND += '${SORT_PASSWD_POSTPROCESS_COMMAND}' # ROOTFS_POSTPROCESS_COMMAND += 'rootfs_reproducible' +# Check and add 'no root password' banner. +# This needs to done at the end of ROOTFS_POSTPROCESS_COMMAND, thus using :append. +ROOTFS_POSTPROCESS_COMMAND:append = " add_empty_root_password_note"
We should use += instead of :append in all cases unless the semantics of append are actually needed. My understanding is that we just need to ensure that add_empty_root_password_note appears after zap_empty_root_password in ROOTFS_POSTPROCESS_COMMAND, and we don't need to use append to do that.
It would also be better to keep the root password related modifications of ROOTFS_POSTPROCESS_COMMAND together, so please move these lines up so they are immediately after the zap_empty_root_password change above.
Thanks,
Signature · 1 line
Paul Barker
RE: [OE-core][PATCH V5 2/2] rootfs-postcommands.bbclass: fix adding 'no password' banner
Hi Paul,
The :append is necessary. See the commit message.
The function must run *after* the set_user_group function invoked by extrausers.bbclass.
This is not related to zap_empty_root_password function. This functions checks the final status of root password and does modification on /etc/issues.
Regards,
Qi
-----Original Message-----
From: Paul Barker <[email protected]>
Sent: Thursday, December 11, 2025 9:51 PM
To: Chen, Qi <[email protected]>; [email protected]
Cc: [email protected]
Subject: Re: [OE-core][PATCH V5 2/2] rootfs-postcommands.bbclass: fix adding 'no password' banner
Quoted 48 lines · On Thu, 2025-12-04 at 08:32 +0000, [email protected] wrote:
From: Chen Qi <[email protected]>
It's possible that users use
EXTRA_USERS_PARAMSto set password for root or explicitly expire root password. So we need to check these two cases to ensure the 'no password' banner is not misleading.As an example, below are configurations to make an image requiring setting a root password on first boot, but without having to first enter a static initial password:
In conf/toolcfg.cfg:
OE_FRAGMENTS+= "distro/poky core/yocto/root-login-with-empty-password In local.conf:
INHERIT += "extrausers"
EXTRA_USERS_PARAMS+= " passwd-expire root;"Checking and adding such a banner is ensured to run as last steps of
ROOTFS_POSTPROCESS_COMMAND, regardless ofIMAGE_FEATURES. In particualr, we want to ensure that the function runs afterset_user_groupfunction from extrausers.bbclass. So unlike other commands in this bbclass using the '+=', this function uses ':append'.Besides, adding such banner is only meaningful when base-passwd and baes-files are installed. In case of container image, they might not be installed (e.g., container-test-image). So add extra checking for it. With the above logic, we avoid breaking the following oe-selftest test case:
containerimage.ContainerImageTests.test_expected_filesSigned-off-by Chen Qi <[email protected]>--- meta/classes-recipe/rootfs-postcommands.bbclass | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-)meta/classes-recipe/rootfs-postcommands.bbclass +1
-1@@ -5,7 +5,7 @@ # # Zap the root password if empty-root-password feature is not enabled -ROOTFS_POSTPROCESS_COMMAND += '${@bb.utils.contains("IMAGE_FEATURES", "empty-root-password", "add_empty_root_password_note", "zap_empty_root_password ",d)}' +ROOTFS_POSTPROCESS_COMMAND += '${@bb.utils.contains("IMAGE_FEATURES", "empty-root-password", "", "zap_empty_root_password ",d)}' # Allow dropbear/openssh to accept logins from accounts with an emptypassword string if allow-empty-password is enabled
ROOTFS_POSTPROCESS_COMMAND+= '${@bb.utils.contains("IMAGE_FEATURES", "allow-empty-password", "ssh_allow_empty_password", "",d)}'
meta/classes-recipe/rootfs-postcommands.bbclass ROOTFS_POSTPROCESS_COMMAND += '${SORT_PASSWD_POSTPROCESS_COMMAND}' · line 69
Quoted 6 lines
meta/classes-recipe/rootfs-postcommands.bbclass +3
-0@@ -64,6 +64,10 @@ ROOTFS_POSTPROCESS_COMMAND += '${SORT_PASSWD_POSTPROCESS_COMMAND}' # ROOTFS_POSTPROCESS_COMMAND += 'rootfs_reproducible' +# Check and add 'no root password' banner. +# This needs to done at the end of ROOTFS_POSTPROCESS_COMMAND, thus using :append. +ROOTFS_POSTPROCESS_COMMAND:append = " add_empty_root_password_note"
We should use += instead of :append in all cases unless the semantics of append are actually needed. My understanding is that we just need to ensure that add_empty_root_password_note appears after zap_empty_root_password in ROOTFS_POSTPROCESS_COMMAND, and we don't need to use append to do that.
It would also be better to keep the root password related modifications of ROOTFS_POSTPROCESS_COMMAND together, so please move these lines up so they are immediately after the zap_empty_root_password change above.
Thanks,
--
Paul Barker
RE: [OE-core][PATCH V5 2/2] rootfs-postcommands.bbclass: fix adding 'no password' banner
Ping
Randy told me that this one was hold because the :append concern.
I think I've stated the reason clearly.
The function is not changing /etc/passwd and /etc/shadow. It's just checking them and changing /etc/issues.
Anyway, if anyone has some other approach. Please let me know.
Regards,
Qi
-----Original Message-----
From: Chen, Qi
Sent: Friday, December 12, 2025 9:13 AM
To: 'Paul Barker' <[email protected]>; [email protected]
Cc: [email protected]
Subject: RE: [OE-core][PATCH V5 2/2] rootfs-postcommands.bbclass: fix adding 'no password' banner
Hi Paul,
The :append is necessary. See the commit message.
The function must run *after* the set_user_group function invoked by extrausers.bbclass.
This is not related to zap_empty_root_password function. This functions checks the final status of root password and does modification on /etc/issues.
Regards,
Qi
-----Original Message-----
From: Paul Barker <[email protected]>
Sent: Thursday, December 11, 2025 9:51 PM
To: Chen, Qi <[email protected]>; [email protected]
Cc: [email protected]
Subject: Re: [OE-core][PATCH V5 2/2] rootfs-postcommands.bbclass: fix adding 'no password' banner
Quoted 48 lines · On Thu, 2025-12-04 at 08:32 +0000, [email protected] wrote:
From: Chen Qi <[email protected]>
It's possible that users use
EXTRA_USERS_PARAMSto set password for root or explicitly expire root password. So we need to check these two cases to ensure the 'no password' banner is not misleading.As an example, below are configurations to make an image requiring setting a root password on first boot, but without having to first enter a static initial password:
In conf/toolcfg.cfg:
OE_FRAGMENTS+= "distro/poky core/yocto/root-login-with-empty-password In local.conf:
INHERIT += "extrausers"
EXTRA_USERS_PARAMS+= " passwd-expire root;"Checking and adding such a banner is ensured to run as last steps of
ROOTFS_POSTPROCESS_COMMAND, regardless ofIMAGE_FEATURES. In particualr, we want to ensure that the function runs afterset_user_groupfunction from extrausers.bbclass. So unlike other commands in this bbclass using the '+=', this function uses ':append'.Besides, adding such banner is only meaningful when base-passwd and baes-files are installed. In case of container image, they might not be installed (e.g., container-test-image). So add extra checking for it. With the above logic, we avoid breaking the following oe-selftest test case:
containerimage.ContainerImageTests.test_expected_filesSigned-off-by Chen Qi <[email protected]>--- meta/classes-recipe/rootfs-postcommands.bbclass | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-)meta/classes-recipe/rootfs-postcommands.bbclass +1
-1@@ -5,7 +5,7 @@ # # Zap the root password if empty-root-password feature is not enabled -ROOTFS_POSTPROCESS_COMMAND += '${@bb.utils.contains("IMAGE_FEATURES", "empty-root-password", "add_empty_root_password_note", "zap_empty_root_password ",d)}' +ROOTFS_POSTPROCESS_COMMAND += '${@bb.utils.contains("IMAGE_FEATURES", "empty-root-password", "", "zap_empty_root_password ",d)}' # Allow dropbear/openssh to accept logins from accounts with an emptypassword string if allow-empty-password is enabled
ROOTFS_POSTPROCESS_COMMAND+= '${@bb.utils.contains("IMAGE_FEATURES", "allow-empty-password", "ssh_allow_empty_password", "",d)}'
meta/classes-recipe/rootfs-postcommands.bbclass ROOTFS_POSTPROCESS_COMMAND += '${SORT_PASSWD_POSTPROCESS_COMMAND}' · line 69
Quoted 6 lines
meta/classes-recipe/rootfs-postcommands.bbclass +3
-0@@ -64,6 +64,10 @@ ROOTFS_POSTPROCESS_COMMAND += '${SORT_PASSWD_POSTPROCESS_COMMAND}' # ROOTFS_POSTPROCESS_COMMAND += 'rootfs_reproducible' +# Check and add 'no root password' banner. +# This needs to done at the end of ROOTFS_POSTPROCESS_COMMAND, thus using :append. +ROOTFS_POSTPROCESS_COMMAND:append = " add_empty_root_password_note"
We should use += instead of :append in all cases unless the semantics of append are actually needed. My understanding is that we just need to ensure that add_empty_root_password_note appears after zap_empty_root_password in ROOTFS_POSTPROCESS_COMMAND, and we don't need to use append to do that.
It would also be better to keep the root password related modifications of ROOTFS_POSTPROCESS_COMMAND together, so please move these lines up so they are immediately after the zap_empty_root_password change above.
Thanks,
--
Paul Barker
Re: [OE-core][PATCH V5 2/2] rootfs-postcommands.bbclass: fix adding 'no password' banner
Quoted 7 lines · Qi
Ping
Randy told me that this one was hold because the :append concern.
I think I've stated the reason clearly.
The function is not changing/etc/passwdand/etc/shadow. It's just checking them and changing/etc/issues.Anyway, if anyone has some other approach. Please let me know.
Hi Qi,
We discussed this on the patch review call yesterday.
I understand the reasons for the :append here and the interaction with the extrausers bbclass. However, this still leaves us with concerns - we don't want recipes chasing each other using :append as the ordering gets very difficult to reason about.
The extrausers bbclass also uses :append, would the ordering be correct if set_user_group and add_empty_root_password_note were both added using += instead? If so, let's patch extrausers.bbclass instead of using an append here.
Best regards,
Signature · 1 line
Paul Barker
Re: [OE-core][PATCH V5 2/2] rootfs-postcommands.bbclass: fix adding 'no password' banner
Quoted 17 lines · Paul Barker
Quoted 7 lines · Qi
Ping
Randy told me that this one was hold because the :append concern.
I think I've stated the reason clearly.
The function is not changing/etc/passwdand/etc/shadow. It's just checking them and changing/etc/issues.Anyway, if anyone has some other approach. Please let me know.
Hi Qi,
We discussed this on the patch review call yesterday.
I understand the reasons for the :append here and the interaction with the extrausers bbclass. However, this still leaves us with concerns - we don't want recipes chasing each other using :append as the ordering gets very difficult to reason about.
Quoted 4 lines
The extrausers bbclass also uses :append, would the ordering be correct if
set_user_groupandadd_empty_root_password_notewere both added using += instead? If so, let's patch extrausers.bbclass instead of using an append here.
Hi Paul,
Thanks for the suggestion.
I checked the history. I found that the 'append' in extrausers.bbclass was first introduced by me. And I cannot recall why I used 'append' at that time.
After changing to use '+=', things continue to work. And the ordering is correct.
I'll send out V6.
Regards,
Qi
Quoted 3 lines
Best regards,