Add cpu hotplug support for powerpc/perf/hv-24x7
Subsystems (2)
v2 cover Add cpu hotplug support for powerpc/perf/hv-24x7
This patchset add cpu hotplug support for hv_24x7 driver by adding online/offline cpu hotplug function. It also add sysfs file "cpumask" to expose current online cpu that can be used for hv_24x7 event count.
Changelog:
v1 -> v2
- Changed function to pick active cpu incase of offline from "cpumask_any_but" to "cpumask_last", as cpumask_any_but function pick very next online cpu and incase where we are sequentially off-lining multiple cpus, "pmu_migrate_context" can add extra latency.
- Suggested by: Gautham R Shenoy.
- Change documentation for cpumask and rather then hardcode the initialization for cpumask_attr_group, add loop to get very first NULL as suggested by Gautham R Shenoy.
Kajol Jain (2):
powerpc/perf/hv-24x7: Add cpu hotplug support powerpc/hv-24x7: Add sysfs files inside hv-24x7 device to show cpumask
.../sysfs-bus-event_source-devices-hv_24x7 | 7 ++ arch/powerpc/perf/hv-24x7.c | 79 ++++++++++++++++++- include/linux/cpuhotplug.h | 1 + 3 files changed, 86 insertions(+), 1 deletion(-)
Signature · 1 line
2.18.2
PATCH v2 1/2 powerpc/perf/hv-24x7: Add cpu hotplug support
Patch here adds cpu hotplug functions to hv_24x7 pmu. A new cpuhp_state "CPUHP_AP_PERF_POWERPC_HV_24x7_ONLINE" enum is added.
The online function update the cpumask only if its NULL. As the primary intention for adding hotplug support is to desiginate a CPU to make HCALL to collect the count data.
The offline function test and clear corresponding cpu in a cpumask and update cpumask to any other active cpu.
--- arch/powerpc/perf/hv-24x7.c | 45 +++++++++++++++++++++++++++++++++++++ include/linux/cpuhotplug.h | 1 + 2 files changed, 46 insertions(+)
arch/powerpc/perf/hv-24x7.c +45 -0
@@ -31,6 +31,8 @@ static int interface_version;/* Whether we have to aggregate result data for some domains. */ static bool aggregate_result_elements; +static cpumask_t hv_24x7_cpumask; +static bool domain_is_valid (unsigned domain) {switch (domain) {
@@ -1641,6 +1643,44 @@ static struct pmu h_24x7_pmu = { .capabilities = PERF_PMU_CAP_NO_EXCLUDE, }; +static int ppc_hv_24x7_cpu_online (unsigned int cpu) +{ +/* Make this CPU the designated target for counter collection */ +if (cpumask_empty (&hv_24x7_cpumask)) +cpumask_set_cpu (cpu, &hv_24x7_cpumask); + +return 0 ; +} + +static int ppc_hv_24x7_cpu_offline (unsigned int cpu) +{ +int target =-1 ; + +/* Check if exiting cpu is used for collecting 24x7 events */ +if (!cpumask_test_and_clear_cpu (cpu, &hv_24x7_cpumask)) +return 0 ; + +/* Find a new cpu to collect 24x7 events */ + target =cpumask_last (cpu_active_mask); + +if (target <0 || target >= nr_cpu_ids) +return -1 ; + +/* Migrate 24x7 events to the new target */ +cpumask_set_cpu (target, &hv_24x7_cpumask); +perf_pmu_migrate_context (&h_24x7_pmu, cpu, target); + +return 0 ; +} + +static int hv_24x7_cpu_hotplug_init (void ) +{ +return cpuhp_setup_state (CPUHP_AP_PERF_POWERPC_HV_24x7_ONLINE, +"perf/powerpc/hv_24x7:online" , + ppc_hv_24x7_cpu_online, + ppc_hv_24x7_cpu_offline); +} +static int hv_24x7_init (void ) {int r;
@@ -1685,6 +1725,11 @@ static int hv_24x7_init(void)if (r)return r; +/* init cpuhotplug */ + r =hv_24x7_cpu_hotplug_init (); +if (r) +pr_err ("hv_24x7: CPU hotplug init failed\n" ); + r =perf_pmu_register (&h_24x7_pmu, h_24x7_pmu.name,-1 );if (r)return r;
include/linux/cpuhotplug.h +1 -0
@@ -181,6 +181,7 @@ enum cpuhp_state {CPUHP_AP_PERF_POWERPC_CORE_IMC_ONLINE ,CPUHP_AP_PERF_POWERPC_THREAD_IMC_ONLINE ,CPUHP_AP_PERF_POWERPC_TRACE_IMC_ONLINE , + CPUHP_AP_PERF_POWERPC_HV_24x7_ONLINE,CPUHP_AP_WATCHDOG_ONLINE ,CPUHP_AP_WORKQUEUE_ONLINE , CPUHP_AP_RCUTREE_ONLINE,
Signature · 1 line
2.18.2
Re: [PATCH v2 1/2] powerpc/perf/hv-24x7: Add cpu hotplug support
Quoted 5 lines · Kajol Jain
Patch here adds cpu hotplug functions to
hv_24x7pmu. A newcpuhp_state"CPUHP_AP_PERF_POWERPC_HV_24x7_ONLINE" enum is added.The online function update the cpumask only if its NULL.
^^^^^^^^^^^^^^^^^^^^^^ ^^^^^^^^^
online callback function updates it is empty.
Quoted 2 lines
As the primary intention for adding hotplug support is to desiginate a CPU to make HCALL to collect the
^^^^^^^^^^ designate
Quoted 6 lines
count data.
The offline function test and clear corresponding cpu in a cpumask and update cpumask to any other active cpu.
Signed-off-by Kajol Jain <[email protected]>
Otherwise, looks good to me.
Quoted 90 lines
--- arch/powerpc/perf/hv-24x7.c | 45 +++++++++++++++++++++++++++++++++++++ include/linux/cpuhotplug.h | 1 + 2 files changed, 46 insertions(+)arch/powerpc/perf/hv-24x7.c +45
-0@@ -31,6 +31,8 @@ static int interface_version;/* Whether we have to aggregate result data for some domains. */ static bool aggregate_result_elements; +static cpumask_t hv_24x7_cpumask; +static bool domain_is_valid (unsigned domain) {switch (domain) {@@ -1641,6 +1643,44 @@ static struct pmu h_24x7_pmu = { .capabilities = PERF_PMU_CAP_NO_EXCLUDE, }; +static int ppc_hv_24x7_cpu_online (unsigned int cpu) +{ +/* Make this CPU the designated target for counter collection */ +if (cpumask_empty (&hv_24x7_cpumask)) +cpumask_set_cpu (cpu, &hv_24x7_cpumask); + +return 0 ; +} + +static int ppc_hv_24x7_cpu_offline (unsigned int cpu) +{ +int target =-1 ; + +/* Check if exiting cpu is used for collecting 24x7 events */ +if (!cpumask_test_and_clear_cpu (cpu, &hv_24x7_cpumask)) +return 0 ; + +/* Find a new cpu to collect 24x7 events */ + target =cpumask_last (cpu_active_mask); + +if (target <0 || target >= nr_cpu_ids) +return -1 ; + +/* Migrate 24x7 events to the new target */ +cpumask_set_cpu (target, &hv_24x7_cpumask); +perf_pmu_migrate_context (&h_24x7_pmu, cpu, target); + +return 0 ; +} + +static int hv_24x7_cpu_hotplug_init (void ) +{ +return cpuhp_setup_state (CPUHP_AP_PERF_POWERPC_HV_24x7_ONLINE, +"perf/powerpc/hv_24x7:online" , + ppc_hv_24x7_cpu_online, + ppc_hv_24x7_cpu_offline); +} +static int hv_24x7_init (void ) {int r;@@ -1685,6 +1725,11 @@ static int hv_24x7_init(void)if (r)return r; +/* init cpuhotplug */ + r =hv_24x7_cpu_hotplug_init (); +if (r) +pr_err ("hv_24x7: CPU hotplug init failed\n" ); + r =perf_pmu_register (&h_24x7_pmu, h_24x7_pmu.name,-1 );if (r)return r;include/linux/cpuhotplug.h +1
-0@@ -181,6 +181,7 @@ enum cpuhp_state {CPUHP_AP_PERF_POWERPC_CORE_IMC_ONLINE ,CPUHP_AP_PERF_POWERPC_THREAD_IMC_ONLINE ,CPUHP_AP_PERF_POWERPC_TRACE_IMC_ONLINE , + CPUHP_AP_PERF_POWERPC_HV_24x7_ONLINE,CPUHP_AP_WATCHDOG_ONLINE ,CPUHP_AP_WORKQUEUE_ONLINE , CPUHP_AP_RCUTREE_ONLINE,Signature · 1 line
2.18.2
Re: [PATCH v2 1/2] powerpc/perf/hv-24x7: Add cpu hotplug support
Quoted 6 lines · Gautham R Shenoy
Quoted 5 lines · Kajol Jain
Patch here adds cpu hotplug functions to
hv_24x7pmu. A newcpuhp_state"CPUHP_AP_PERF_POWERPC_HV_24x7_ONLINE" enum is added.The online function update the cpumask only if its NULL.
Quoted 9 lines
^^^^^^^^^^^^^^^^^^^^^^ ^^^^^^^^^
online callback function updates it is empty.Quoted 2 lines
As the primary intention for adding hotplug support is to desiginate a CPU to make HCALL to collect the
^^^^^^^^^^ designate
Sorry My bad. Thanks for reviewing the patch. Will correct these mistakes.
Thanks,
Kajol Jain
Quoted 101 lines
Quoted 6 lines
count data.
The offline function test and clear corresponding cpu in a cpumask and update cpumask to any other active cpu.
Signed-off-by Kajol Jain <[email protected]>Otherwise, looks good to me.
Reviewed-by Gautham R. Shenoy <[email protected]>Quoted 90 lines
--- arch/powerpc/perf/hv-24x7.c | 45 +++++++++++++++++++++++++++++++++++++ include/linux/cpuhotplug.h | 1 + 2 files changed, 46 insertions(+)arch/powerpc/perf/hv-24x7.c +45
-0@@ -31,6 +31,8 @@ static int interface_version;/* Whether we have to aggregate result data for some domains. */ static bool aggregate_result_elements; +static cpumask_t hv_24x7_cpumask; +static bool domain_is_valid (unsigned domain) {switch (domain) {@@ -1641,6 +1643,44 @@ static struct pmu h_24x7_pmu = { .capabilities = PERF_PMU_CAP_NO_EXCLUDE, }; +static int ppc_hv_24x7_cpu_online (unsigned int cpu) +{ +/* Make this CPU the designated target for counter collection */ +if (cpumask_empty (&hv_24x7_cpumask)) +cpumask_set_cpu (cpu, &hv_24x7_cpumask); + +return 0 ; +} + +static int ppc_hv_24x7_cpu_offline (unsigned int cpu) +{ +int target =-1 ; + +/* Check if exiting cpu is used for collecting 24x7 events */ +if (!cpumask_test_and_clear_cpu (cpu, &hv_24x7_cpumask)) +return 0 ; + +/* Find a new cpu to collect 24x7 events */ + target =cpumask_last (cpu_active_mask); + +if (target <0 || target >= nr_cpu_ids) +return -1 ; + +/* Migrate 24x7 events to the new target */ +cpumask_set_cpu (target, &hv_24x7_cpumask); +perf_pmu_migrate_context (&h_24x7_pmu, cpu, target); + +return 0 ; +} + +static int hv_24x7_cpu_hotplug_init (void ) +{ +return cpuhp_setup_state (CPUHP_AP_PERF_POWERPC_HV_24x7_ONLINE, +"perf/powerpc/hv_24x7:online" , + ppc_hv_24x7_cpu_online, + ppc_hv_24x7_cpu_offline); +} +static int hv_24x7_init (void ) {int r;@@ -1685,6 +1725,11 @@ static int hv_24x7_init(void)if (r)return r; +/* init cpuhotplug */ + r =hv_24x7_cpu_hotplug_init (); +if (r) +pr_err ("hv_24x7: CPU hotplug init failed\n" ); + r =perf_pmu_register (&h_24x7_pmu, h_24x7_pmu.name,-1 );if (r)return r;include/linux/cpuhotplug.h +1
-0@@ -181,6 +181,7 @@ enum cpuhp_state {CPUHP_AP_PERF_POWERPC_CORE_IMC_ONLINE ,CPUHP_AP_PERF_POWERPC_THREAD_IMC_ONLINE ,CPUHP_AP_PERF_POWERPC_TRACE_IMC_ONLINE , + CPUHP_AP_PERF_POWERPC_HV_24x7_ONLINE,CPUHP_AP_WATCHDOG_ONLINE ,CPUHP_AP_WORKQUEUE_ONLINE , CPUHP_AP_RCUTREE_ONLINE,Signature · 1 line
2.18.2
PATCH v2 2/2 powerpc/hv-24x7: Add sysfs files inside hv-24x7 device to show cpumask
In reply to Kajol JainPatch here adds a cpumask attr to hv_24x7 pmu along with ABI documentation.
command:# cat /sys/devices/hv_24x7/cpumask
0
--- .../sysfs-bus-event_source-devices-hv_24x7 | 7 ++++ arch/powerpc/perf/hv-24x7.c | 36 +++++++++++++++++-- 2 files changed, 41 insertions(+), 2 deletions(-)
Documentation/ABI/testing/sysfs-bus-event_source-devices-hv_24x7 +7 -0
@@ -43,6 +43,13 @@ Description: read only This sysfs interface exposes the number of cores per chip present in the system. +What: /sys/devices/hv_24x7/cpumask +Date: June 2020 +Contact: Linux on PowerPC Developer List <[email protected]> +Description: read only + This sysfs file exposes the cpumask which is designated to make + HCALLs to retrive hv-24x7 pmu event counter data. + What: /sys/bus/event_source/devices/hv_24x7/event_descs/<event-name> Date: February 2014 Contact: Linux on PowerPC Developer List <[email protected]>
arch/powerpc/perf/hv-24x7.c +34 -2
@@ -448,6 +448,12 @@ static ssize_t device_show_string(struct device *dev,return sprintf (buf,"%s\n" , (char *)d->var); } +static ssize_t cpumask_get_attr (struct device *dev, +struct device_attribute *attr,char *buf) +{ +return cpumap_print_to_pagebuf (true, buf, &hv_24x7_cpumask); +} +static ssize_t sockets_show (struct device *dev,struct device_attribute *attr,char *buf) {
@@ -1116,6 +1122,17 @@ static DEVICE_ATTR_RO(sockets);static DEVICE_ATTR_RO (chipspersocket);static DEVICE_ATTR_RO (coresperchip); +static DEVICE_ATTR(cpumask, S_IRUGO, cpumask_get_attr, NULL); + +static struct attribute *cpumask_attrs[] = { + &dev_attr_cpumask.attr, +NULL , +}; + +static struct attribute_group cpumask_attr_group = { + .attrs = cpumask_attrs, +}; +static struct bin_attribute *if_bin_attrs[] = { &bin_attr_catalog,NULL ,
@@ -1143,6 +1160,11 @@ static const struct attribute_group *attr_groups[] = { &event_desc_group, &event_long_desc_group, &if_group, +/* +* This NULL is a placeholder for the cpumask attr which will update +* onlyif cpuhotplug registration is successful +*/ +NULL , NULL, };
@@ -1683,7 +1705,7 @@ static int hv_24x7_cpu_hotplug_init(void)static int hv_24x7_init (void ) { -int r; +int r, i =-1 ;unsigned long hret;struct hv_perf_caps caps;
@@ -1727,8 +1749,18 @@ static int hv_24x7_init(void)/* init cpuhotplug */ r =hv_24x7_cpu_hotplug_init (); -if (r) +if (r) {pr_err ("hv_24x7: CPU hotplug init failed\n" ); + }else { +/* +* Cpu hotplug init is successful, add the +* cpumask file as part of pmu attr group and +* assign it to very first NULL location. +*/ +while (attr_groups[++i]) +/* nothing */ ; + attr_groups[i] = &cpumask_attr_group; + } r =perf_pmu_register (&h_24x7_pmu, h_24x7_pmu.name,-1 );if (r)
Signature · 1 line
2.18.2
Re: [PATCH v2 2/2] powerpc/hv-24x7: Add sysfs files inside hv-24x7 device to show cpumask
Hi Kajol,
Quoted 4 lines · Kajol Jain
Patch here adds a cpumask attr to
hv_24x7pmu along with ABI documentation.command:# cat
/sys/devices/hv_24x7/cpumask
0
Since this sysfs interface is read-only, and the user cannot change the CPU which will be making the HCALLs to obtain the 24x7 counts, does the user even need to know if currently CPU X is the one which is going to make HCALLs to retrive the 24x7 counts ? Does it help in any kind of trouble-shooting ?
It would have made sense if the interface was read-write, since a user can set this to a CPU which is not running user applications. This would help in minimising jitter on those active CPUs running the user applications.
Quoted 104 lines
Signed-off-by Kajol Jain <[email protected]>--- .../sysfs-bus-event_source-devices-hv_24x7 | 7 ++++ arch/powerpc/perf/hv-24x7.c | 36 +++++++++++++++++-- 2 files changed, 41 insertions(+), 2 deletions(-)Documentation/ABI/testing/sysfs-bus-event_source-devices-hv_24x7 +7
-0@@ -43,6 +43,13 @@ Description: read only This sysfs interface exposes the number of cores per chip present in the system. +What: /sys/devices/hv_24x7/cpumask +Date: June 2020 +Contact: Linux on PowerPC Developer List <[email protected]> +Description: read only + This sysfs file exposes the cpumask which is designated to make + HCALLs to retrive hv-24x7 pmu event counter data. + What: /sys/bus/event_source/devices/hv_24x7/event_descs/<event-name> Date: February 2014 Contact: Linux on PowerPC Developer List <[email protected]>arch/powerpc/perf/hv-24x7.c +34
-2@@ -448,6 +448,12 @@ static ssize_t device_show_string(struct device *dev,return sprintf (buf,"%s\n" , (char *)d->var); } +static ssize_t cpumask_get_attr (struct device *dev, +struct device_attribute *attr,char *buf) +{ +return cpumap_print_to_pagebuf (true, buf, &hv_24x7_cpumask); +} +static ssize_t sockets_show (struct device *dev,struct device_attribute *attr,char *buf) {@@ -1116,6 +1122,17 @@ static DEVICE_ATTR_RO(sockets);static DEVICE_ATTR_RO (chipspersocket);static DEVICE_ATTR_RO (coresperchip); +static DEVICE_ATTR(cpumask, S_IRUGO, cpumask_get_attr, NULL); + +static struct attribute *cpumask_attrs[] = { + &dev_attr_cpumask.attr, +NULL , +}; + +static struct attribute_group cpumask_attr_group = { + .attrs = cpumask_attrs, +}; +static struct bin_attribute *if_bin_attrs[] = { &bin_attr_catalog,NULL ,@@ -1143,6 +1160,11 @@ static const struct attribute_group *attr_groups[] = { &event_desc_group, &event_long_desc_group, &if_group, +/* +* This NULL is a placeholder for the cpumask attr which will update +* onlyif cpuhotplug registration is successful +*/ +NULL , NULL, };@@ -1683,7 +1705,7 @@ static int hv_24x7_cpu_hotplug_init(void)static int hv_24x7_init (void ) { -int r; +int r, i =-1 ;unsigned long hret;struct hv_perf_caps caps;@@ -1727,8 +1749,18 @@ static int hv_24x7_init(void)/* init cpuhotplug */ r =hv_24x7_cpu_hotplug_init (); -if (r) +if (r) {pr_err ("hv_24x7: CPU hotplug init failed\n" ); + }else { +/* +* Cpu hotplug init is successful, add the +* cpumask file as part of pmu attr group and +* assign it to very first NULL location. +*/ +while (attr_groups[++i]) +/* nothing */ ; + attr_groups[i] = &cpumask_attr_group; + } r =perf_pmu_register (&h_24x7_pmu, h_24x7_pmu.name,-1 );if (r)Signature · 1 line
2.18.2
Madhavan Srinivasan
maintainerRe: [PATCH v2 2/2] powerpc/hv-24x7: Add sysfs files inside hv-24x7 device to show cpumask
Quoted 5 lines · Gautham R Shenoy
Hi Kajol,
Quoted 2 lines · Kajol Jain
Patch here adds a cpumask attr to
hv_24x7pmu along with ABI documentation.
Quoted 7 lines
Quoted 2 lines
command:# cat
/sys/devices/hv_24x7/cpumask
0Since this sysfs interface is read-only, and the user cannot change the CPU which will be making the HCALLs to obtain the 24x7 counts, does the user even need to know if currently CPU X is the one which is going to make HCALLs to retrive the 24x7 counts ? Does it help in any kind of trouble-shooting ?
Primary use to expose the cpumask is for the perf tool. Which has the capability to parse the driver sysfs folder and understand the cpumask file. Having cpumask file will reduce the number of perf commandline parameters (will avoid "-C" option in the perf tool command line). I can also notify the user which is the current cpu used to retrieve the counter data.
Quoted 4 lines
It would have made sense if the interface was read-write, since a user can set this to a CPU which is not running user applications. This would help in minimising jitter on those active CPUs running the user applications.
With cpumask backed by hotplug
notifiers, enabling user write access to it will complicate the code with more additional check. CPU will come to play only if the user request for counter data. If not, then there will be no HCALLs made using the CPU.
Maddy
Quoted 105 lines
Quoted 105 lines
Signed-off-by Kajol Jain <[email protected]>--- .../sysfs-bus-event_source-devices-hv_24x7 | 7 ++++ arch/powerpc/perf/hv-24x7.c | 36 +++++++++++++++++-- 2 files changed, 41 insertions(+), 2 deletions(-)Documentation/ABI/testing/sysfs-bus-event_source-devices-hv_24x7 +7
-0@@ -43,6 +43,13 @@ Description: read only This sysfs interface exposes the number of cores per chip present in the system. +What: /sys/devices/hv_24x7/cpumask +Date: June 2020 +Contact: Linux on PowerPC Developer List <[email protected]> +Description: read only + This sysfs file exposes the cpumask which is designated to make + HCALLs to retrive hv-24x7 pmu event counter data. + What: /sys/bus/event_source/devices/hv_24x7/event_descs/<event-name> Date: February 2014 Contact: Linux on PowerPC Developer List <[email protected]>arch/powerpc/perf/hv-24x7.c +34
-2@@ -448,6 +448,12 @@ static ssize_t device_show_string(struct device *dev,return sprintf (buf,"%s\n" , (char *)d->var); } +static ssize_t cpumask_get_attr (struct device *dev, +struct device_attribute *attr,char *buf) +{ +return cpumap_print_to_pagebuf (true, buf, &hv_24x7_cpumask); +} +static ssize_t sockets_show (struct device *dev,struct device_attribute *attr,char *buf) {@@ -1116,6 +1122,17 @@ static DEVICE_ATTR_RO(sockets);static DEVICE_ATTR_RO (chipspersocket);static DEVICE_ATTR_RO (coresperchip); +static DEVICE_ATTR(cpumask, S_IRUGO, cpumask_get_attr, NULL); + +static struct attribute *cpumask_attrs[] = { + &dev_attr_cpumask.attr, +NULL , +}; + +static struct attribute_group cpumask_attr_group = { + .attrs = cpumask_attrs, +}; +static struct bin_attribute *if_bin_attrs[] = { &bin_attr_catalog,NULL ,@@ -1143,6 +1160,11 @@ static const struct attribute_group *attr_groups[] = { &event_desc_group, &event_long_desc_group, &if_group, +/* +* This NULL is a placeholder for the cpumask attr which will update +* onlyif cpuhotplug registration is successful +*/ +NULL , NULL, };@@ -1683,7 +1705,7 @@ static int hv_24x7_cpu_hotplug_init(void)static int hv_24x7_init (void ) { -int r; +int r, i =-1 ;unsigned long hret;struct hv_perf_caps caps;@@ -1727,8 +1749,18 @@ static int hv_24x7_init(void)/* init cpuhotplug */ r =hv_24x7_cpu_hotplug_init (); -if (r) +if (r) {pr_err ("hv_24x7: CPU hotplug init failed\n" ); + }else { +/* +* Cpu hotplug init is successful, add the +* cpumask file as part of pmu attr group and +* assign it to very first NULL location. +*/ +while (attr_groups[++i]) +/* nothing */ ; + attr_groups[i] = &cpumask_attr_group; + } r =perf_pmu_register (&h_24x7_pmu, h_24x7_pmu.name,-1 );if (r)Signature · 1 line
2.18.2
Re: [PATCH v2 2/2] powerpc/hv-24x7: Add sysfs files inside hv-24x7 device to show cpumask
Quoted 15 lines · Madhavan Srinivasan
Quoted 5 lines · Gautham R Shenoy
Hi Kajol,
Quoted 2 lines · Kajol Jain
Patch here adds a cpumask attr to
hv_24x7pmu along with ABI documentation.Quoted 7 lines
Quoted 2 lines
command:# cat
/sys/devices/hv_24x7/cpumask
0Since this sysfs interface is read-only, and the user cannot change the CPU which will be making the HCALLs to obtain the 24x7 counts, does the user even need to know if currently CPU X is the one which is going to make HCALLs to retrive the 24x7 counts ? Does it help in any kind of trouble-shooting ?
Quoted 7 lines
Primary use to expose the cpumask is for the perf tool. Which has the capability to parse the driver sysfs folder and understand the cpumask file. Having cpumask file will reduce the number of perf commandline parameters (will avoid "-C" option in the perf tool command line). I can also notify the user which is the current cpu used to retrieve the counter data.
Fair enough. Can we include this in the patch description ?
Quoted 6 lines
Quoted 5 lines
It would have made sense if the interface was read-write, since a user can set this to a CPU which is not running user applications. This would help in minimising jitter on those active CPUs running the user applications.
Quoted 6 lines
With cpumask backed by hotplug
notifiers, enabling user write access to it will complicate the code with more additional check. CPU will come to play only if the user request for counter data. If not, then there will be no HCALLs made using the CPU.
Well, I was wondering if you could make the interface writable because I couldn't think of the use of a read-only interface. With the perf-use case you have provided, I guess it makes sense. I am ok with it being a read-only interface.
Quoted 2 lines
Maddy
--
Thanks and Regards
gautham.
Re: [PATCH v2 2/2] powerpc/hv-24x7: Add sysfs files inside hv-24x7 device to show cpumask
Quoted 24 lines · Gautham R Shenoy
Quoted 15 lines · Madhavan Srinivasan
Quoted 5 lines · Gautham R Shenoy
Hi Kajol,
Quoted 2 lines · Kajol Jain
Patch here adds a cpumask attr to
hv_24x7pmu along with ABI documentation.Quoted 7 lines
Quoted 2 lines
command:# cat
/sys/devices/hv_24x7/cpumask
0Since this sysfs interface is read-only, and the user cannot change the CPU which will be making the HCALLs to obtain the 24x7 counts, does the user even need to know if currently CPU X is the one which is going to make HCALLs to retrive the 24x7 counts ? Does it help in any kind of trouble-shooting ?
Quoted 7 lines
Primary use to expose the cpumask is for the perf tool. Which has the capability to parse the driver sysfs folder and understand the cpumask file. Having cpumask file will reduce the number of perf commandline parameters (will avoid "-C" option in the perf tool command line). I can also notify the user which is the current cpu used to retrieve the counter data.
Quoted 1 line
Fair enough. Can we include this in the patch description ?
Sure will update in next version of patchset.
Thanks,
Kajol Jain
Quoted 26 lines
Quoted 7 lines
Quoted 6 lines
It would have made sense if the interface was read-write, since a user can set this to a CPU which is not running user applications. This would help in minimising jitter on those active CPUs running the user applications.
Quoted 6 lines
With cpumask backed by hotplug
notifiers, enabling user write access to it will complicate the code with more additional check. CPU will come to play only if the user request for counter data. If not, then there will be no HCALLs made using the CPU.Well, I was wondering if you could make the interface writable because I couldn't think of the use of a read-only interface. With the perf-use case you have provided, I guess it makes sense. I am ok with it being a read-only interface.
Quoted 2 lines
Maddy
--
Thanks and Regards
gautham.