MAINTAINERS: add a git repo for the Stratix10 Service driver
Subsystems (2)
Dinh Nguyen
maintainerPATCH 1/2 MAINTAINERS: add a git repo for the Stratix10 Service driver
Add a git repo entry for the Stratix10 Service driver.
--- MAINTAINERS | 1 + 1 file changed, 1 insertion(+)
MAINTAINERS +1 -0
@@ -9890,6 +9890,7 @@ F: drivers/firmware/stratix10-rsu.c F: drivers/firmware/stratix10-svc.c F: include/linux/firmware/intel/stratix10-smc.h F: include/linux/firmware/intel/stratix10-svc-client.h +T: git git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux.git INTEL TELEMETRY DRIVER M: Rajneesh Bhardwaj <[email protected]>
Signature · 1 line
2.25.1
Dinh Nguyen
maintainerPATCH 2/2 firmware: stratix10-svc: extend SVC driver to get the firmware version
From: Richard Gong <[email protected]>
Extend Intel service layer driver to get the firmware version running at FPGA device. Therefore FPGA manager driver, one of Intel service layer driver's client, can decide whether to handle the newly added bitstream authentication function based on the retrieved firmware version.
--- drivers/firmware/stratix10-svc.c | 9 +++++++- include/linux/firmware/intel/stratix10-smc.h | 21 +++++++++++++++++-- .../firmware/intel/stratix10-svc-client.h | 4 ++++ 3 files changed, 31 insertions(+), 3 deletions(-)
drivers/firmware/stratix10-svc.c +8 -1
@@ -306,6 +306,7 @@ static void svc_thread_recv_status_ok(struct stratix10_svc_data *p_data,break ;case COMMAND_RSU_RETRY :case COMMAND_RSU_MAX_RETRY : +case COMMAND_FIRMWARE_VERSION : cb_data->status =BIT (SVC_STATUS_OK ); cb_data->kaddr1 = &res.a1;break ;
@@ -422,6 +423,11 @@ static int svc_normal_to_secure_thread(void *data) a1 =0 ; a2 =0 ;break ; +case COMMAND_FIRMWARE_VERSION : + a0 =INTEL_SIP_SMC_FIRMWARE_VERSION ; + a1 =0 ; + a2 =0 ; +break ;default :pr_warn ("it shouldn't happen\n" );break ;
@@ -491,7 +497,8 @@ static int svc_normal_to_secure_thread(void *data)*/ if ((pdata->command ==COMMAND_RSU_RETRY ) || (pdata->command ==COMMAND_RSU_MAX_RETRY ) || - (pdata->command ==COMMAND_RSU_NOTIFY )) { + (pdata->command ==COMMAND_RSU_NOTIFY ) || + (pdata->command ==COMMAND_FIRMWARE_VERSION )) { cbdata->status =BIT (SVC_STATUS_NO_SUPPORT ); cbdata->kaddr1 =NULL ;
include/linux/firmware/intel/stratix10-smc.h +19 -2
@@ -321,8 +321,6 @@ INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_COMPLETED_WRITE)#define INTEL_SIP_SMC_ECC_DBE \ INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_ECC_DBE) -#endif -/** * Request INTEL_SIP_SMC_RSU_NOTIFY *
@@ -404,3 +402,22 @@ INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_FPGA_CONFIG_COMPLETED_WRITE)#define INTEL_SIP_SMC_FUNCID_RSU_MAX_RETRY 18#define INTEL_SIP_SMC_RSU_MAX_RETRY \ INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_RSU_MAX_RETRY) + +/** +* Request INTEL_SIP_SMC_FIRMWARE_VERSION +* +* Sync call used to query the version of running firmware +* +* Call register usage: +* a0 INTEL_SIP_SMC_FIRMWARE_VERSION +* a1-a7 not used +* +* Return status: +* a0 INTEL_SIP_SMC_STATUS_OK or INTEL_SIP_SMC_STATUS_ERROR +* a1 running firmware version +*/ +#define INTEL_SIP_SMC_FUNCID_FIRMWARE_VERSION 31 +#define INTEL_SIP_SMC_FIRMWARE_VERSION \ + INTEL_SIP_SMC_FAST_CALL_VAL(INTEL_SIP_SMC_FUNCID_FIRMWARE_VERSION) + +#endif
include/linux/firmware/intel/stratix10-svc-client.h +4 -0
@@ -104,6 +104,9 @@ struct stratix10_svc_chan;* * @COMMAND_RSU_DCMF_VERSION: query firmware for the DCMF version, return status * is SVC_STATUS_OK or SVC_STATUS_ERROR +* +* @COMMAND_FIRMWARE_VERSION: query running firmware version, return status +* is SVC_STATUS_OK or SVC_STATUS_ERROR */ enum stratix10_svc_command_code {COMMAND_NOOP =0 ,
@@ -117,6 +120,7 @@ enum stratix10_svc_command_code {COMMAND_RSU_RETRY ,COMMAND_RSU_MAX_RETRY ,COMMAND_RSU_DCMF_VERSION , + COMMAND_FIRMWARE_VERSION, };/**
Signature · 1 line
2.25.1
Tom Rix
reviewerQuoted 12 lines · Dinh Nguyen
Add a git repo entry for the Stratix10 Service driver.
Signed-off-by Dinh Nguyen <[email protected]>--- MAINTAINERS | 1 + 1 file changed, 1 insertion(+)MAINTAINERS +0
-0
MAINTAINERS F: drivers/firmware/stratix10-rsu.c · line 9893
Quoted 4 lines
MAINTAINERS +1
-0@@ -9890,6 +9890,7 @@ F: drivers/firmware/stratix10-rsu.c F: drivers/firmware/stratix10-svc.c F: include/linux/firmware/intel/stratix10-smc.h F: include/linux/firmware/intel/stratix10-svc-client.h +T: git git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux.git
Can you check if your tree is ok ?
Tom
Quoted 1 line
git clone
git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux.git
Cloning into 'linux'...
remote: Enumerating objects: 185, done.
remote: Counting objects: 100% (185/185), done.
remote: Compressing objects: 100% (4/4), done.
remote: Total 8723742 (delta 182), reused 181 (delta 181), pack-reused 8723557 Receiving objects: 100% (8723742/8723742), 2.41 GiB | 2.78 MiB/s, done. Resolving deltas: 100% (7135708/7135708), done.
warning: remote HEAD refers to nonexistent ref, unable to checkout.
Quoted 3 lines
INTEL TELEMETRY DRIVER
M: Rajneesh Bhardwaj <[email protected]>
Dinh Nguyen
maintainerQuoted 28 lines · Tom Rix
Quoted 12 lines · Dinh Nguyen
Add a git repo entry for the Stratix10 Service driver.
Signed-off-by Dinh Nguyen <[email protected]>---
MAINTAINERS| 1 +1 file changed, 1 insertion(+)MAINTAINERS +0
-0@@ -9890,6 +9890,7 @@ F: drivers/firmware/stratix10-rsu.cQuoted 5 lines
F:
drivers/firmware/stratix10-svc.c
F:include/linux/firmware/intel/stratix10-smc.hF:include/linux/firmware/intel/stratix10-svc-client.h+T: gitgit://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux.gitCan you check if your tree is ok ?
Tom
Quoted 1 line
git clone
git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux.git
Quoted 9 lines
Cloning into 'linux'...
remote: Enumerating objects: 185, done.
remote: Counting objects: 100% (185/185), done.
remote: Compressing objects: 100% (4/4), done.
remote: Total 8723742 (delta 182), reused 181 (delta 181), pack-reused 8723557 Receiving objects: 100% (8723742/8723742), 2.41 GiB | 2.78 MiB/s, done. Resolving deltas: 100% (7135708/7135708), done.
warning: remote HEAD refers to nonexistent ref, unable to checkout.
Hmm...seeing the issue. Not sure what's going on, will troubleshoot.
Dinh
Dinh Nguyen
maintainerQuoted 41 lines · Dinh Nguyen
Quoted 27 lines · Tom Rix
Quoted 12 lines · Dinh Nguyen
Add a git repo entry for the Stratix10 Service driver.
Signed-off-by Dinh Nguyen <[email protected]>---
MAINTAINERS| 1 +1 file changed, 1 insertion(+)MAINTAINERS +0
-0@@ -9890,6 +9890,7 @@ F: drivers/firmware/stratix10-rsu.cQuoted 5 lines
F:
drivers/firmware/stratix10-svc.c
F:include/linux/firmware/intel/stratix10-smc.hF:include/linux/firmware/intel/stratix10-svc-client.h+T: gitgit://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux.gitCan you check if your tree is ok ?
Tom
> git clone
git://git.kernel.org/pub/scm/linux/kernel/git/dinguyen/linux.gitQuoted 9 lines
Cloning into 'linux'...
remote: Enumerating objects: 185, done.
remote: Counting objects: 100% (185/185), done.
remote: Compressing objects: 100% (4/4), done.
remote: Total 8723742 (delta 182), reused 181 (delta 181), pack-reused 8723557 Receiving objects: 100% (8723742/8723742), 2.41 GiB | 2.78 MiB/s, done. Resolving deltas: 100% (7135708/7135708), done.
warning: remote HEAD refers to nonexistent ref, unable to checkout.
Quoted 2 lines
Hmm...seeing the issue. Not sure what's going on, will troubleshoot.
Looks like I just fixed it, please try again. I didn't have a 'master' branch.
Dinh