Add support of New Amlogic temperature sensor for G12 SoCs
Subsystems (4)
Guillaume La Roque
maintainerv6 cover Add support of New Amlogic temperature sensor for G12 SoCs
This patchs series add support of New Amlogic temperature sensor and minimal thermal zone for SEI510 and ODROID-N2 boards.
First implementation was doing on IIO[1] but after comments i move on thermal framework. Formulas and calibration values come from amlogic.
Changes since v5:
- fix patch 5 and 6 send twice
Changes since v4:
- Move thermal-zone in soc dtsi file
- Remove critical trip point and add passive one
- fix commit message
- use devm_platform_ioremap_resource instead of platform_get_resource
Changes since v3:
- Add cooling map and trip point for hot type
- move compatible on g12a instead of g12 to be aligned with others
- add all reviewer, sorry for this mistake
Changes since v2:
- fix yaml documention
- remove unneeded status variable for temperature-sensor node
- rework driver after Martin review
- add some information in commit message
Changes since v1:
- fix enum vs const in documentation
- fix error with thermal-sensor-cells value set to 1 instead of 0
- add some dependencies needed to add cooling-maps
Dependencies :
- patch 3,4 & 5: depends on Neil's patch and series :
- missing dwc2 phy-names[2]
- patchsets to add DVFS on G12a[3] which have deps on [4] and [5]
[1] https://lore.kernel.org/linux-amlogic/[email protected]/
[2] https://lore.kernel.org/linux-amlogic/[email protected]/
[3] https://lore.kernel.org/linux-amlogic/[email protected]/
[4] https://lore.kernel.org/linux-amlogic/[email protected]/
[5] https://lore.kernel.org/linux-amlogic/[email protected]/
Guillaume La Roque (7):
dt-bindings: thermal: Add DT bindings documentation for Amlogic
Thermal
thermal: amlogic: Add thermal driver to support G12 SoCs
arm64: dts: amlogic: g12: add temperature sensor
arm64: dts: meson: g12: Add minimal thermal zone
arm64: dts: amlogic: g12a: add cooling properties
arm64: dts: amlogic: g12b: add cooling properties
MAINTAINERS: add entry for Amlogic Thermal driver
.../bindings/thermal/amlogic,thermal.yaml | 54 +++ MAINTAINERS | 9 + .../boot/dts/amlogic/meson-g12-common.dtsi | 66 ++++ arch/arm64/boot/dts/amlogic/meson-g12a.dtsi | 24 ++ arch/arm64/boot/dts/amlogic/meson-g12b.dtsi | 29 ++ drivers/thermal/Kconfig | 11 + drivers/thermal/Makefile | 1 + drivers/thermal/amlogic_thermal.c | 333 ++++++++++++++++++ 8 files changed, 527 insertions(+) create mode 100644 Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml create mode 100644 drivers/thermal/amlogic_thermal.c
Signature · 1 line
2.17.1
Guillaume La Roque
maintainerPATCH v6 1/7 dt-bindings: thermal: Add DT bindings documentation for Amlogic Thermal
Adding the devicetree binding documentation for the Amlogic temperature sensor found in the Amlogic Meson G12A and G12B SoCs.
--- .../bindings/thermal/amlogic,thermal.yaml | 54 +++++++++++++++++++ 1 file changed, 54 insertions(+) create mode 100644 Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml
Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml new file +54 -0
@@ -0,0 +1,54 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/thermal/amlogic,thermal.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Amlogic Thermal + +maintainers: + - Guillaume La Roque <[email protected]> + +description: Binding for Amlogic Thermal + +properties: + compatible: + items: + - enum: + - amlogic,g12a-cpu-thermal + - amlogic,g12a-ddr-thermal + - const: amlogic,g12a-thermal + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + amlogic,ao-secure: + description: phandle to the ao-secure syscon + $ref: '/schemas/types.yaml#/definitions/phandle' + + +required: + - compatible + - reg + - interrupts + - clocks + - amlogic,ao-secure + +examples: + - | + cpu_temp: temperature-sensor@ff634800 { + compatible = "amlogic,g12a-cpu-thermal", + "amlogic,g12a-thermal"; + reg = <0xff634800 0x50>; + interrupts = <0x0 0x24 0x0>; + clocks = <&clk 164>; + #thermal-sensor-cells = <0>; + amlogic,ao-secure = <&sec_AO>; + }; +...
Signature · 1 line
2.17.1
Re: [PATCH v6 1/7] dt-bindings: thermal: Add DT bindings documentation for Amlogic Thermal
Quoted 81 lines · Guillaume La Roque
Adding the devicetree binding documentation for the Amlogic temperature sensor found in the Amlogic Meson G12A and G12B SoCs.
Reviewed-by Rob Herring <[email protected]>Tested-by Christian Hewitt <[email protected]>Tested-by Kevin Hilman <[email protected]>Signed-off-by Guillaume La Roque <[email protected]>--- .../bindings/thermal/amlogic,thermal.yaml | 54 +++++++++++++++++++ 1 file changed, 54 insertions(+) create mode 100644 Documentation/devicetree/bindings/thermal/amlogic,thermal.yamlDocumentation/devicetree/bindings/thermal/amlogic,thermal.yaml new file +54
-1@@ -0,0 +1,54 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/thermal/amlogic,thermal.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Amlogic Thermal + +maintainers: + - Guillaume La Roque <[email protected]> + +description: Binding for Amlogic Thermal + +properties: + compatible: + items: + - enum: + - amlogic,g12a-cpu-thermal + - amlogic,g12a-ddr-thermal + - const: amlogic,g12a-thermal + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + amlogic,ao-secure: + description: phandle to the ao-secure syscon + $ref: '/schemas/types.yaml#/definitions/phandle' + + +required: + - compatible + - reg + - interrupts + - clocks + - amlogic,ao-secure + +examples: + - | + cpu_temp: temperature-sensor@ff634800 { + compatible = "amlogic,g12a-cpu-thermal", + "amlogic,g12a-thermal"; + reg = <0xff634800 0x50>; + interrupts = <0x0 0x24 0x0>; + clocks = <&clk 164>; + #thermal-sensor-cells = <0>; + amlogic,ao-secure = <&sec_AO>; + }; +... --2.17.1
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Re: [PATCH v6 1/7] dt-bindings: thermal: Add DT bindings documentation for Amlogic Thermal
In reply to Guillaume La RoqueQuoted 8 lines · Guillaume La Roque
Adding the devicetree binding documentation for the Amlogic temperature sensor found in the Amlogic Meson G12A and G12B SoCs.
Reviewed-by Rob Herring <[email protected]>Tested-by Christian Hewitt <[email protected]>Tested-by Kevin Hilman <[email protected]>Signed-off-by Guillaume La Roque <[email protected]>
Quoted 73 lines
--- .../bindings/thermal/amlogic,thermal.yaml | 54 +++++++++++++++++++ 1 file changed, 54 insertions(+) create mode 100644 Documentation/devicetree/bindings/thermal/amlogic,thermal.yamlDocumentation/devicetree/bindings/thermal/amlogic,thermal.yaml new file +54
-1@@ -0,0 +1,54 @@ +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/thermal/amlogic,thermal.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Amlogic Thermal + +maintainers: + - Guillaume La Roque <[email protected]> + +description: Binding for Amlogic Thermal + +properties: + compatible: + items: + - enum: + - amlogic,g12a-cpu-thermal + - amlogic,g12a-ddr-thermal + - const: amlogic,g12a-thermal + + reg: + maxItems: 1 + + interrupts: + maxItems: 1 + + clocks: + maxItems: 1 + + amlogic,ao-secure: + description: phandle to the ao-secure syscon + $ref: '/schemas/types.yaml#/definitions/phandle' + + +required: + - compatible + - reg + - interrupts + - clocks + - amlogic,ao-secure + +examples: + - | + cpu_temp: temperature-sensor@ff634800 { + compatible = "amlogic,g12a-cpu-thermal", + "amlogic,g12a-thermal"; + reg = <0xff634800 0x50>; + interrupts = <0x0 0x24 0x0>; + clocks = <&clk 164>; + #thermal-sensor-cells = <0>; + amlogic,ao-secure = <&sec_AO>; + }; +... --2.17.1
_______________________________________________
linux-arm-kernel mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
Guillaume La Roque
maintainerPATCH v6 2/7 thermal: amlogic: Add thermal driver to support G12 SoCs
In reply to Guillaume La RoqueAmlogic G12A and G12B SoCs integrate two thermal sensors
with the same design. One is located close to the DDR controller and the other one is located close to the PLLs (between the CPU and GPU).
The calibration data for each of the thermal sensors instance is stored in a different location within the AO region.
Implement reading the temperature from each thermal sensor.
The IP block has more functionality, which may be added to this driver in the future:
- chip reset when the temperature exceeds a configurable threshold
- up to four interrupts when the temperature has risen above a configurable threshold
- up to four interrupts when the temperature has fallen below a configurable threshold
--- drivers/thermal/Kconfig | 11 + drivers/thermal/Makefile | 1 + drivers/thermal/amlogic_thermal.c | 333 ++++++++++++++++++++++++++++++ 3 files changed, 345 insertions(+) create mode 100644 drivers/thermal/amlogic_thermal.c
drivers/thermal/Kconfig +11 -0
@@ -348,6 +348,17 @@ config MTK_THERMAL Enable this option if you want to have support for thermal management controller present in Mediatek SoCs +config AMLOGIC_THERMAL + tristate "Amlogic Thermal Support" + default ARCH_MESON + depends on OF && ARCH_MESON + help + If you say yes here you get support for Amlogic Thermal + for G12 SoC Family. + + This driver can also be built as a module. If so, the module will + be called amlogic_thermal. + menu "Intel thermal drivers" depends on X86 || X86_INTEL_QUARK || COMPILE_TEST source "drivers/thermal/intel/Kconfig"
drivers/thermal/Makefile +1 -0
@@ -54,3 +54,4 @@ obj-$(CONFIG_MTK_THERMAL) += mtk_thermal.o obj-$(CONFIG_GENERIC_ADC_THERMAL) += thermal-generic-adc.o obj-$(CONFIG_ZX2967_THERMAL) += zx2967_thermal.o obj-$(CONFIG_UNIPHIER_THERMAL) += uniphier_thermal.o +obj-$(CONFIG_AMLOGIC_THERMAL) += amlogic_thermal.o
drivers/thermal/amlogic_thermal.c new file +333 -0
333 lines not on this page · raw message
Signature · 1 line
2.17.1
Re: [PATCH v6 2/7] thermal: amlogic: Add thermal driver to support G12 SoCs
Quoted 18 lines · Guillaume La Roque
Amlogic G12A and G12B SoCs integrate two thermal sensors
with the same design. One is located close to the DDR controller and the other one is located close to the PLLs (between the CPU and GPU).The calibration data for each of the thermal sensors instance is stored in a different location within the AO region.
Implement reading the temperature from each thermal sensor.
The IP block has more functionality, which may be added to this driver in the future:
- chip reset when the temperature exceeds a configurable threshold
- up to four interrupts when the temperature has risen above a configurable threshold
- up to four interrupts when the temperature has fallen below a configurable threshold
Quoted 3 lines
Tested-by Christian Hewitt <[email protected]>Tested-by Kevin Hilman <[email protected]>Signed-off-by Guillaume La Roque <[email protected]>
Quoted 380 lines
--- drivers/thermal/Kconfig | 11 + drivers/thermal/Makefile | 1 + drivers/thermal/amlogic_thermal.c | 333 ++++++++++++++++++++++++++++++ 3 files changed, 345 insertions(+) create mode 100644 drivers/thermal/amlogic_thermal.cdrivers/thermal/Kconfig +11
-0@@ -348,6 +348,17 @@ config MTK_THERMAL Enable this option if you want to have support for thermal management controller present in Mediatek SoCs +config AMLOGIC_THERMAL + tristate "Amlogic Thermal Support" + default ARCH_MESON + depends on OF && ARCH_MESON + help + If you say yes here you get support for Amlogic Thermal + for G12 SoC Family. + + This driver can also be built as a module. If so, the module will + be called amlogic_thermal. + menu "Intel thermal drivers" depends on X86 || X86_INTEL_QUARK || COMPILE_TEST source "drivers/thermal/intel/Kconfig"drivers/thermal/Makefile +1
-0@@ -54,3 +54,4 @@ obj-$(CONFIG_MTK_THERMAL) += mtk_thermal.o obj-$(CONFIG_GENERIC_ADC_THERMAL) += thermal-generic-adc.o obj-$(CONFIG_ZX2967_THERMAL) += zx2967_thermal.o obj-$(CONFIG_UNIPHIER_THERMAL) += uniphier_thermal.o +obj-$(CONFIG_AMLOGIC_THERMAL) += amlogic_thermal.odrivers/thermal/amlogic_thermal.c new file +333
-1@@ -0,0 +1,333 @@ +// SPDX-License-Identifier: GPL-2.0+ +/* +* Amlogic Thermal Sensor Driver +* +* Copyright (C) 2017 Huan Biao <[email protected]> +* Copyright (C) 2019 Guillaume La Roque <[email protected]> +* +* Register value to celsius temperature formulas: +* Read_Val m * U +* U = ---------, Uptat = --------- +* 2^16 1 + n * U +* +* Temperature = A * ( Uptat + u_efuse / 2^16 )- B +* +* A B m n : calibration parameters +* u_efuse : fused calibration value, it's a signed 16 bits value +*/ + +#include <linux/bitfield.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/mfd/syscon.h> +#include <linux/module.h> +#include <linux/of.h> +#include <linux/of_address.h> +#include <linux/of_device.h> +#include <linux/platform_device.h> +#include <linux/regmap.h> +#include <linux/thermal.h> + +#include "thermal_core.h" + +#define TSENSOR_CFG_REG1 0x4 +#define TSENSOR_CFG_REG1_RSET_VBG BIT(12) +#define TSENSOR_CFG_REG1_RSET_ADC BIT(11) +#define TSENSOR_CFG_REG1_VCM_EN BIT(10) +#define TSENSOR_CFG_REG1_VBG_EN BIT(9) +#define TSENSOR_CFG_REG1_OUT_CTL BIT(6) +#define TSENSOR_CFG_REG1_FILTER_EN BIT(5) +#define TSENSOR_CFG_REG1_DEM_EN BIT(3) +#define TSENSOR_CFG_REG1_CH_SEL GENMASK(1, 0) +#define TSENSOR_CFG_REG1_ENABLE \ + (TSENSOR_CFG_REG1_FILTER_EN | \ + TSENSOR_CFG_REG1_VCM_EN | \ + TSENSOR_CFG_REG1_VBG_EN | \ + TSENSOR_CFG_REG1_DEM_EN | \ + TSENSOR_CFG_REG1_CH_SEL) + +#define TSENSOR_STAT0 0x40 + +#define TSENSOR_STAT9 0x64 + +#define TSENSOR_READ_TEMP_MASK GENMASK(15, 0) +#define TSENSOR_TEMP_MASK GENMASK(11, 0) + +#define TSENSOR_TRIM_SIGN_MASK BIT(15) +#define TSENSOR_TRIM_TEMP_MASK GENMASK(14, 0) +#define TSENSOR_TRIM_VERSION_MASK GENMASK(31, 24) + +#define TSENSOR_TRIM_VERSION (_version) \ + FIELD_GET(TSENSOR_TRIM_VERSION_MASK, _version) + +#define TSENSOR_TRIM_CALIB_VALID_MASK (GENMASK(3, 2) | BIT(7)) + +#define TSENSOR_CALIB_OFFSET 1 +#define TSENSOR_CALIB_SHIFT 4 + +/** +* struct amlogic_thermal_soc_calib_data +* @A, B, m, n: calibration parameters +* This structure is required for configuration of amlogic thermal driver. +*/ +struct amlogic_thermal_soc_calib_data { +int A; +int B; +int m; +int n; +}; + +/** +* struct amlogic_thermal_data +* @u_efuse_off: register offset to read fused calibration value +* @calibration_parameters: calibration parameters structure pointer +* @regmap_config: regmap config for the device +* This structure is required for configuration of amlogic thermal driver. +*/ +struct amlogic_thermal_data { +int u_efuse_off; +const struct amlogic_thermal_soc_calib_data *calibration_parameters; +const struct regmap_config *regmap_config; +}; + +struct amlogic_thermal { +struct platform_device *pdev; +const struct amlogic_thermal_data *data; +struct regmap *regmap; +struct regmap *sec_ao_map; +struct clk *clk; +struct thermal_zone_device *tzd; +u32 trim_info; +}; + +/* +* Calculate a temperature value from a temperature code. +* The unit of the temperature is degree milliCelsius. +*/ +static int amlogic_thermal_code_to_millicelsius (struct amlogic_thermal *pdata, +int temp_code) +{ +const struct amlogic_thermal_soc_calib_data *param = + pdata->data->calibration_parameters; +int temp; +s64 factor, Uptat, uefuse; + + uefuse = pdata->trim_info &TSENSOR_TRIM_SIGN_MASK ? + ~(pdata->trim_info &TSENSOR_TRIM_TEMP_MASK ) +1 : + (pdata->trim_info &TSENSOR_TRIM_TEMP_MASK ); + + factor = param->n * temp_code; + factor =div_s64 (factor,100 ); + + Uptat = temp_code * param->m; + Uptat =div_s64 (Uptat,100 ); + Uptat = Uptat *BIT (16 ); + Uptat =div_s64 (Uptat,BIT (16 ) + factor); + + temp = (Uptat + uefuse) * param->A; + temp =div_s64 (temp,BIT (16 )); + temp = (temp - param->B) *100 ; + +return temp; +} + +static int amlogic_thermal_initialize (struct amlogic_thermal *pdata) +{ +int ret =0 ; +int ver; + +regmap_read (pdata->sec_ao_map, pdata->data->u_efuse_off, + &pdata->trim_info); + + ver =TSENSOR_TRIM_VERSION (pdata->trim_info); + +if ((ver &TSENSOR_TRIM_CALIB_VALID_MASK ) ==0 ) { + ret = -EINVAL ; +dev_err (&pdata->pdev->dev, +"tsensor thermal calibration not supported: 0x%x!\n" , + ver); + } + +return ret; +} + +static int amlogic_thermal_enable (struct amlogic_thermal *data) +{ +int ret; + + ret =clk_prepare_enable (data->clk); +if (ret) +return ret; + +regmap_update_bits (data->regmap,TSENSOR_CFG_REG1 , +TSENSOR_CFG_REG1_ENABLE ,TSENSOR_CFG_REG1_ENABLE ); + +return 0 ; +} + +static int amlogic_thermal_disable (struct amlogic_thermal *data) +{ +regmap_update_bits (data->regmap,TSENSOR_CFG_REG1 , +TSENSOR_CFG_REG1_ENABLE ,0 ); +clk_disable_unprepare (data->clk); + +return 0 ; +} + +static int amlogic_thermal_get_temp (void *data,int *temp) +{ +unsigned int tval; +struct amlogic_thermal *pdata = data; + +if (!data) +return -EINVAL ; + +regmap_read (pdata->regmap,TSENSOR_STAT0 , &tval); + *temp = +amlogic_thermal_code_to_millicelsius (pdata, + tval &TSENSOR_READ_TEMP_MASK ); + +return 0 ; +} + +static const struct thermal_zone_of_device_ops amlogic_thermal_ops = { + .get_temp = amlogic_thermal_get_temp, +}; + +static const struct regmap_config amlogic_thermal_regmap_config_g12a = { + .reg_bits =8 , + .val_bits =32 , + .reg_stride =4 , + .max_register =TSENSOR_STAT9 , +}; + +static const struct amlogic_thermal_soc_calib_data amlogic_thermal_g12a = { + .A =9411 , + .B =3159 , + .m =424 , + .n =324 , +}; + +static const struct amlogic_thermal_data amlogic_thermal_g12a_cpu_param = { + .u_efuse_off =0x128 , + .calibration_parameters = &amlogic_thermal_g12a, + .regmap_config = &amlogic_thermal_regmap_config_g12a, +}; + +static const struct amlogic_thermal_data amlogic_thermal_g12a_ddr_param = { + .u_efuse_off =0xf0 , + .calibration_parameters = &amlogic_thermal_g12a, + .regmap_config = &amlogic_thermal_regmap_config_g12a, +}; + +static const struct of_device_id of_amlogic_thermal_match[] = { + { + .compatible ="amlogic,g12a-ddr-thermal" , + .data = &amlogic_thermal_g12a_ddr_param, + }, + { + .compatible ="amlogic,g12a-cpu-thermal" , + .data = &amlogic_thermal_g12a_cpu_param, + }, + {/* sentinel */ } +}; +MODULE_DEVICE_TABLE (of, of_amlogic_thermal_match); + +static int amlogic_thermal_probe (struct platform_device *pdev) +{ +struct amlogic_thermal *pdata; +struct device *dev = &pdev->dev; +void __iomem *base; +int ret; + + pdata =devm_kzalloc (dev,sizeof (*pdata),GFP_KERNEL ); +if (!pdata) +return -ENOMEM ; + + pdata->data =of_device_get_match_data (dev); + pdata->pdev = pdev; +platform_set_drvdata (pdev, pdata); + + base =devm_platform_ioremap_resource (pdev,0 ); +if (IS_ERR (base)) { +dev_err (dev,"failed to get io address\n" ); +return PTR_ERR (base); + } + + pdata->regmap =devm_regmap_init_mmio (dev, base, + pdata->data->regmap_config); +if (IS_ERR (pdata->regmap)) +return PTR_ERR (pdata->regmap); + + pdata->clk =devm_clk_get (dev,NULL ); +if (IS_ERR (pdata->clk)) { +if (PTR_ERR (pdata->clk) != -EPROBE_DEFER ) +dev_err (dev,"failed to get clock\n" ); +return PTR_ERR (pdata->clk); + } + + pdata->sec_ao_map =syscon_regmap_lookup_by_phandle + (pdev->dev.of_node,"amlogic,ao-secure" ); +if (IS_ERR (pdata->sec_ao_map)) { +dev_err (dev,"syscon regmap lookup failed.\n" ); +return PTR_ERR (pdata->sec_ao_map); + } + + pdata->tzd =devm_thermal_zone_of_sensor_register (&pdev->dev, +0 , + pdata, + &amlogic_thermal_ops); +if (IS_ERR (pdata->tzd)) { + ret =PTR_ERR (pdata->tzd); +dev_err (dev,"Failed to register tsensor: %d\n" , ret); +return ret; + } + + ret =amlogic_thermal_initialize (pdata); +if (ret) +return ret; + + ret =amlogic_thermal_enable (pdata); + +return ret; +} + +static int amlogic_thermal_remove (struct platform_device *pdev) +{ +struct amlogic_thermal *data =platform_get_drvdata (pdev); + +return amlogic_thermal_disable (data); +} + +static int __maybe_unused amlogic_thermal_suspend (struct device *dev) +{ +struct amlogic_thermal *data =dev_get_drvdata (dev); + +return amlogic_thermal_disable (data); +} + +static int __maybe_unused amlogic_thermal_resume (struct device *dev) +{ +struct amlogic_thermal *data =dev_get_drvdata (dev); + +return amlogic_thermal_enable (data); +} + +static SIMPLE_DEV_PM_OPS(amlogic_thermal_pm_ops, + amlogic_thermal_suspend, amlogic_thermal_resume); + +static struct platform_driver amlogic_thermal_driver = { + .driver = { + .name ="amlogic_thermal" , + .pm = &amlogic_thermal_pm_ops, + .of_match_table = of_amlogic_thermal_match, + }, + .probe = amlogic_thermal_probe, + .remove = amlogic_thermal_remove, +}; + +module_platform_driver (amlogic_thermal_driver); + +MODULE_AUTHOR ("Guillaume La Roque <[email protected]>" ); +MODULE_DESCRIPTION ("Amlogic thermal driver" ); +MODULE_LICENSE ("GPL v2" ); --2.17.1
Guillaume La Roque
maintainerPATCH v6 3/7 arm64: dts: amlogic: g12: add temperature sensor
In reply to Guillaume La RoqueAdd cpu and ddr temperature sensors for G12 Socs
--- .../boot/dts/amlogic/meson-g12-common.dtsi | 20 +++++++++++++++++++ 1 file changed, 20 insertions(+)
arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi +20 -0
@@ -1353,6 +1353,26 @@ }; }; + cpu_temp: temperature-sensor@34800 { + compatible = "amlogic,g12a-cpu-thermal", + "amlogic,g12a-thermal"; + reg = <0x0 0x34800 0x0 0x50>; + interrupts = <GIC_SPI 35 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc CLKID_TS>; + #thermal-sensor-cells = <0>; + amlogic,ao-secure = <&sec_AO>; + }; + + ddr_temp: temperature-sensor@34c00 { + compatible = "amlogic,g12a-ddr-thermal", + "amlogic,g12a-thermal"; + reg = <0x0 0x34c00 0x0 0x50>; + interrupts = <GIC_SPI 36 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc CLKID_TS>; + #thermal-sensor-cells = <0>; + amlogic,ao-secure = <&sec_AO>; + }; + usb2_phy0: phy@36000 { compatible = "amlogic,g12a-usb2-phy"; reg = <0x0 0x36000 0x0 0x2000>;
Signature · 1 line
2.17.1
Re: [PATCH v6 3/7] arm64: dts: amlogic: g12: add temperature sensor
Quoted 32 lines · Guillaume La Roque
Add cpu and ddr temperature sensors for G12 Socs
Reviewed-by Martin Blumenstingl <[email protected]>Tested-by Christian Hewitt <[email protected]>Tested-by Kevin Hilman <[email protected]>Signed-off-by Guillaume La Roque <[email protected]>--- .../boot/dts/amlogic/meson-g12-common.dtsi | 20 +++++++++++++++++++ 1 file changed, 20 insertions(+)arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi +13
-0@@ -1353,6 +1353,26 @@ }; }; + cpu_temp: temperature-sensor@34800 { + compatible = "amlogic,g12a-cpu-thermal", + "amlogic,g12a-thermal"; + reg = <0x0 0x34800 0x0 0x50>; + interrupts = <GIC_SPI 35 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc CLKID_TS>; + #thermal-sensor-cells = <0>; + amlogic,ao-secure = <&sec_AO>; + }; + + ddr_temp: temperature-sensor@34c00 { + compatible = "amlogic,g12a-ddr-thermal", + "amlogic,g12a-thermal";
arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi line 1378
Quoted 10 lines
arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi +7
-0+ reg = <0x0 0x34c00 0x0 0x50>; + interrupts = <GIC_SPI 36 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc CLKID_TS>; + #thermal-sensor-cells = <0>; + amlogic,ao-secure = <&sec_AO>; + }; + usb2_phy0: phy@36000 { compatible = "amlogic,g12a-usb2-phy"; reg = <0x0 0x36000 0x0 0x2000>;
Re: [PATCH v6 3/7] arm64: dts: amlogic: g12: add temperature sensor
In reply to Guillaume La RoqueQuoted 7 lines · Guillaume La Roque
Add cpu and ddr temperature sensors for G12 Socs
Reviewed-by Martin Blumenstingl <[email protected]>Tested-by Christian Hewitt <[email protected]>Tested-by Kevin Hilman <[email protected]>Signed-off-by Guillaume La Roque <[email protected]>
Quoted 38 lines
--- .../boot/dts/amlogic/meson-g12-common.dtsi | 20 +++++++++++++++++++ 1 file changed, 20 insertions(+)arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi +20
-1@@ -1353,6 +1353,26 @@ }; }; + cpu_temp: temperature-sensor@34800 { + compatible = "amlogic,g12a-cpu-thermal", + "amlogic,g12a-thermal"; + reg = <0x0 0x34800 0x0 0x50>; + interrupts = <GIC_SPI 35 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc CLKID_TS>; + #thermal-sensor-cells = <0>; + amlogic,ao-secure = <&sec_AO>; + }; + + ddr_temp: temperature-sensor@34c00 { + compatible = "amlogic,g12a-ddr-thermal", + "amlogic,g12a-thermal"; + reg = <0x0 0x34c00 0x0 0x50>; + interrupts = <GIC_SPI 36 IRQ_TYPE_EDGE_RISING>; + clocks = <&clkc CLKID_TS>; + #thermal-sensor-cells = <0>; + amlogic,ao-secure = <&sec_AO>; + }; + usb2_phy0: phy@36000 { compatible = "amlogic,g12a-usb2-phy"; reg = <0x0 0x36000 0x0 0x2000>; --2.17.1
Guillaume La Roque
maintainerPATCH v6 4/7 arm64: dts: meson: g12: Add minimal thermal zone
In reply to Guillaume La RoqueAdd minimal thermal zone for two temperature sensor One is located close to the DDR and the other one is located close to the PLLs (between the CPU and GPU)
--- .../boot/dts/amlogic/meson-g12-common.dtsi | 46 +++++++++++++++++++ 1 file changed, 46 insertions(+)
arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi +46 -0
@@ -12,6 +12,7 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/reset/amlogic,meson-axg-audio-arb.h> #include <dt-bindings/reset/amlogic,meson-g12a-reset.h> +#include <dt-bindings/thermal/thermal.h> / { interrupt-parent = <&gic>;
@@ -94,6 +95,50 @@ #size-cells = <2>; ranges; + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay = <1000>; + polling-delay-passive = <100>; + thermal-sensors = <&cpu_temp>; + + trips { + cpu_passive: cpu-passive { + temperature = <85000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + + cpu_hot: cpu-hot { + temperature = <95000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "hot"; + }; + + }; + }; + + ddr_thermal: ddr-thermal { + polling-delay = <1000>; + polling-delay-passive = <100>; + thermal-sensors = <&ddr_temp>; + + trips { + ddr_passive: ddr-passive { + temperature = <85000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + }; + + cooling-maps { + map { + trip = <&ddr_passive>; + cooling-device = <&mali THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + }; + ethmac: ethernet@ff3f0000 { compatible = "amlogic,meson-axg-dwmac", "snps,dwmac-3.70a",
@@ -2412,6 +2457,7 @@ assigned-clock-rates = <0>, /* Do Nothing */ <800000000>, <0>; /* Do Nothing */ + #cooling-cells = <2>; }; };
Signature · 1 line
2.17.1
Re: [PATCH v6 4/7] arm64: dts: meson: g12: Add minimal thermal zone
Quoted 77 lines · Guillaume La Roque
Add minimal thermal zone for two temperature sensor One is located close to the DDR and the other one is located close to the PLLs (between the CPU and GPU)
Tested-by Christian Hewitt <[email protected]>Tested-by Kevin Hilman <[email protected]>Signed-off-by Guillaume La Roque <[email protected]>--- .../boot/dts/amlogic/meson-g12-common.dtsi | 46 +++++++++++++++++++ 1 file changed, 46 insertions(+)arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi +45
-0@@ -12,6 +12,7 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/reset/amlogic,meson-axg-audio-arb.h> #include <dt-bindings/reset/amlogic,meson-g12a-reset.h> +#include <dt-bindings/thermal/thermal.h> / { interrupt-parent = <&gic>;@@ -94,6 +95,50 @@ #size-cells = <2>; ranges; + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay = <1000>; + polling-delay-passive = <100>; + thermal-sensors = <&cpu_temp>; + + trips { + cpu_passive: cpu-passive { + temperature = <85000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + + cpu_hot: cpu-hot { + temperature = <95000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "hot"; + }; + + }; + }; + + ddr_thermal: ddr-thermal { + polling-delay = <1000>; + polling-delay-passive = <100>; + thermal-sensors = <&ddr_temp>; + + trips { + ddr_passive: ddr-passive { + temperature = <85000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + }; + + cooling-maps { + map { + trip = <&ddr_passive>; + cooling-device = <&mali THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + }; + ethmac: ethernet@ff3f0000 { compatible = "amlogic,meson-axg-dwmac", "snps,dwmac-3.70a",
arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi line 2463
Quoted 7 lines
arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi +1
-0@@ -2412,6 +2457,7 @@ assigned-clock-rates = <0>, /* Do Nothing */ <800000000>, <0>; /* Do Nothing */ + #cooling-cells = <2>; }; };
Re: [PATCH v6 4/7] arm64: dts: meson: g12: Add minimal thermal zone
In reply to Guillaume La RoqueQuoted 36 lines · Guillaume La Roque
Add minimal thermal zone for two temperature sensor One is located close to the DDR and the other one is located close to the PLLs (between the CPU and GPU)
Tested-by Christian Hewitt <[email protected]>Tested-by Kevin Hilman <[email protected]>Signed-off-by Guillaume La Roque <[email protected]>--- .../boot/dts/amlogic/meson-g12-common.dtsi | 46 +++++++++++++++++++ 1 file changed, 46 insertions(+)arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi +8
-0@@ -12,6 +12,7 @@ #include <dt-bindings/interrupt-controller/arm-gic.h> #include <dt-bindings/reset/amlogic,meson-axg-audio-arb.h> #include <dt-bindings/reset/amlogic,meson-g12a-reset.h> +#include <dt-bindings/thermal/thermal.h> / { interrupt-parent = <&gic>;@@ -94,6 +95,50 @@ #size-cells = <2>; ranges; + thermal-zones { + cpu_thermal: cpu-thermal { + polling-delay = <1000>; + polling-delay-passive = <100>; + thermal-sensors = <&cpu_temp>; + + trips {
arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi line 114
Quoted 10 lines
arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi +10
-0+ cpu_passive: cpu-passive { + temperature = <85000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + + cpu_hot: cpu-hot { + temperature = <95000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "hot";
critical instead of hot? What is the SoC's critical shutdown temperature?
Typically, you would use 'hot' at the beginning of at up trend e.g. at 75000, 'passive' to start throttling and 'critical' for shutdown temperature.
Quoted 41 lines
arch/arm64/boot/dts/amlogic/meson-g12-common.dtsi +28
-1+ }; + + }; + }; + + ddr_thermal: ddr-thermal { + polling-delay = <1000>; + polling-delay-passive = <100>; + thermal-sensors = <&ddr_temp>; + + trips { + ddr_passive: ddr-passive { + temperature = <85000>; /* millicelsius */ + hysteresis = <2000>; /* millicelsius */ + type = "passive"; + }; + }; + + cooling-maps { + map { + trip = <&ddr_passive>; + cooling-device = <&mali THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + }; + }; + ethmac: ethernet@ff3f0000 { compatible = "amlogic,meson-axg-dwmac", "snps,dwmac-3.70a",@@ -2412,6 +2457,7 @@ assigned-clock-rates = <0>, /* Do Nothing */ <800000000>, <0>; /* Do Nothing */ + #cooling-cells = <2>; }; }; --2.17.1
Guillaume La Roque
maintainerPATCH v6 5/7 arm64: dts: amlogic: g12a: add cooling properties
In reply to Guillaume La RoqueAdd missing #colling-cells field for G12A SoC Add cooling-map for passive and hot trip point
--- arch/arm64/boot/dts/amlogic/meson-g12a.dtsi | 24 +++++++++++++++++++++ 1 file changed, 24 insertions(+)
arch/arm64/boot/dts/amlogic/meson-g12a.dtsi +24 -0
@@ -18,6 +18,7 @@ reg = <0x0 0x0>; enable-method = "psci"; next-level-cache = <&l2>; + #cooling-cells = <2>; }; cpu1: cpu@1 {
@@ -26,6 +27,7 @@ reg = <0x0 0x1>; enable-method = "psci"; next-level-cache = <&l2>; + #cooling-cells = <2>; }; cpu2: cpu@2 {
@@ -34,6 +36,7 @@ reg = <0x0 0x2>; enable-method = "psci"; next-level-cache = <&l2>; + #cooling-cells = <2>; }; cpu3: cpu@3 {
@@ -42,6 +45,7 @@ reg = <0x0 0x3>; enable-method = "psci"; next-level-cache = <&l2>; + #cooling-cells = <2>; }; l2: l2-cache0 {
@@ -113,3 +117,23 @@ &sd_emmc_a { amlogic,dram-access-quirk; }; + +&cpu_thermal { + cooling-maps { + map0 { + trip = <&cpu_passive>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + + map1 { + trip = <&cpu_hot>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; +};
Signature · 1 line
2.17.1
Re: [PATCH v6 5/7] arm64: dts: amlogic: g12a: add cooling properties
Quoted 61 lines · Guillaume La Roque
Add missing #colling-cells field for G12A SoC Add cooling-map for passive and hot trip point
Tested-by Christian Hewitt <[email protected]>Tested-by Kevin Hilman <[email protected]>Signed-off-by Guillaume La Roque <[email protected]>--- arch/arm64/boot/dts/amlogic/meson-g12a.dtsi | 24 +++++++++++++++++++++ 1 file changed, 24 insertions(+)arch/arm64/boot/dts/amlogic/meson-g12a.dtsi +14
-0@@ -18,6 +18,7 @@ reg = <0x0 0x0>; enable-method = "psci"; next-level-cache = <&l2>; + #cooling-cells = <2>; }; cpu1: cpu@1 {@@ -26,6 +27,7 @@ reg = <0x0 0x1>; enable-method = "psci"; next-level-cache = <&l2>; + #cooling-cells = <2>; }; cpu2: cpu@2 {@@ -34,6 +36,7 @@ reg = <0x0 0x2>; enable-method = "psci"; next-level-cache = <&l2>; + #cooling-cells = <2>; }; cpu3: cpu@3 {@@ -42,6 +45,7 @@ reg = <0x0 0x3>; enable-method = "psci"; next-level-cache = <&l2>; + #cooling-cells = <2>; }; l2: l2-cache0 {@@ -113,3 +117,23 @@ &sd_emmc_a { amlogic,dram-access-quirk; }; + +&cpu_thermal { + cooling-maps { + map0 { + trip = <&cpu_passive>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + };
arch/arm64/boot/dts/amlogic/meson-g12a.dtsi line 139
Quoted 10 lines
arch/arm64/boot/dts/amlogic/meson-g12a.dtsi +10
-0+ + map1 { + trip = <&cpu_hot>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; +};
Guillaume La Roque
maintainerPATCH v6 6/7 arm64: dts: amlogic: g12b: add cooling properties
In reply to Guillaume La RoqueAdd missing #colling-cells field for G12B SoC Add cooling-map for passive and hot trip point
--- arch/arm64/boot/dts/amlogic/meson-g12b.dtsi | 29 +++++++++++++++++++++ 1 file changed, 29 insertions(+)
arch/arm64/boot/dts/amlogic/meson-g12b.dtsi +29 -0
@@ -49,6 +49,7 @@ reg = <0x0 0x0>; enable-method = "psci"; next-level-cache = <&l2>; + #cooling-cells = <2>; }; cpu1: cpu@1 {
@@ -57,6 +58,7 @@ reg = <0x0 0x1>; enable-method = "psci"; next-level-cache = <&l2>; + #cooling-cells = <2>; }; cpu100: cpu@100 {
@@ -65,6 +67,7 @@ reg = <0x0 0x100>; enable-method = "psci"; next-level-cache = <&l2>; + #cooling-cells = <2>; }; cpu101: cpu@101 {
@@ -73,6 +76,7 @@ reg = <0x0 0x101>; enable-method = "psci"; next-level-cache = <&l2>; + #cooling-cells = <2>; }; cpu102: cpu@102 {
@@ -81,6 +85,7 @@ reg = <0x0 0x102>; enable-method = "psci"; next-level-cache = <&l2>; + #cooling-cells = <2>; }; cpu103: cpu@103 {
@@ -89,6 +94,7 @@ reg = <0x0 0x103>; enable-method = "psci"; next-level-cache = <&l2>; + #cooling-cells = <2>; }; l2: l2-cache0 {
@@ -219,3 +225,26 @@ &sd_emmc_a { amlogic,dram-access-quirk; }; + +&cpu_thermal { + cooling-maps { + map0 { + trip = <&cpu_passive>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu100 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu101 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu102 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu103 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 { + trip = <&cpu_hot>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu100 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu101 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu102 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu103 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; +};
Signature · 1 line
2.17.1
Re: [PATCH v6 6/7] arm64: dts: amlogic: g12b: add cooling properties
Quoted 80 lines · Guillaume La Roque
Add missing #colling-cells field for G12B SoC Add cooling-map for passive and hot trip point
Tested-by Christian Hewitt <[email protected]>Tested-by Kevin Hilman <[email protected]>Signed-off-by Guillaume La Roque <[email protected]>--- arch/arm64/boot/dts/amlogic/meson-g12b.dtsi | 29 +++++++++++++++++++++ 1 file changed, 29 insertions(+)arch/arm64/boot/dts/amlogic/meson-g12b.dtsi +19
-0@@ -49,6 +49,7 @@ reg = <0x0 0x0>; enable-method = "psci"; next-level-cache = <&l2>; + #cooling-cells = <2>; }; cpu1: cpu@1 {@@ -57,6 +58,7 @@ reg = <0x0 0x1>; enable-method = "psci"; next-level-cache = <&l2>; + #cooling-cells = <2>; }; cpu100: cpu@100 {@@ -65,6 +67,7 @@ reg = <0x0 0x100>; enable-method = "psci"; next-level-cache = <&l2>; + #cooling-cells = <2>; }; cpu101: cpu@101 {@@ -73,6 +76,7 @@ reg = <0x0 0x101>; enable-method = "psci"; next-level-cache = <&l2>; + #cooling-cells = <2>; }; cpu102: cpu@102 {@@ -81,6 +85,7 @@ reg = <0x0 0x102>; enable-method = "psci"; next-level-cache = <&l2>; + #cooling-cells = <2>; }; cpu103: cpu@103 {@@ -89,6 +94,7 @@ reg = <0x0 0x103>; enable-method = "psci"; next-level-cache = <&l2>; + #cooling-cells = <2>; }; l2: l2-cache0 {@@ -219,3 +225,26 @@ &sd_emmc_a { amlogic,dram-access-quirk; }; + +&cpu_thermal { + cooling-maps { + map0 { + trip = <&cpu_passive>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu100 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu101 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu102 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu103 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + map1 {
arch/arm64/boot/dts/amlogic/meson-g12b.dtsi line 250
Quoted 10 lines
arch/arm64/boot/dts/amlogic/meson-g12b.dtsi +10
-0+ trip = <&cpu_hot>; + cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu100 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu101 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu102 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&cpu103 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; +};
Guillaume La Roque
maintainerPATCH v6 7/7 MAINTAINERS: add entry for Amlogic Thermal driver
In reply to Guillaume La RoqueAdd myself as maintainer for Amlogic Thermal driver.
--- MAINTAINERS | 9 +++++++++ 1 file changed, 9 insertions(+)
MAINTAINERS +9 -0
@@ -15932,6 +15932,15 @@ F: Documentation/driver-api/thermal/cpu-cooling-api.rst F: drivers/thermal/cpu_cooling.c F: include/linux/cpu_cooling.h +THERMAL DRIVER FOR AMLOGIC SOCS +M: Guillaume La Roque <[email protected]> +L: [email protected] +L: [email protected] +W: http://linux-meson.com/ +S: Supported +F: drivers/thermal/amlogic_thermal.c +F: Documentation/devicetree/bindings/thermal/amlogic,thermal.yaml + THINKPAD ACPI EXTRAS DRIVER M: Henrique de Moraes Holschuh <[email protected]> L: [email protected]
Signature · 1 line
2.17.1