Skip to contentSkip to conversation

(Possible) fix for "Unhandled rela relocation: R_X86_64_PLT32" error

PATCH Chris Clayton 4 participants 11 messages Jul 25, 2018 – Aug 24, 2018

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

Hi.

I haven't rebooted my laptop with kexec for quite some time, but when I tried to this morning I got the error you will see in $SUBJECT. The error occurs with both kexec-tools-2.0.17 or -2.0.16 run on either 4.18.0-rc6+ (built from a git pull this morning) or 4.14.57 kernels.

I searched for "R_X86_64_PLT32" and found that there was a change to the kernel that may be related - b21ebf2fb4cde1618915a97cc773e287ff49173e x86: Treat R_X86_64_PLT32 as R_X86_64_PC32. So I replicated the change that patch made to arch/x86/kernel/machine_kexec_64.c in kexec/arch/x86_64/kexec-elf-rel-x86_64.c and kexec now reboots into the new kernel.

I don't know enough about relocations and the like to know whether my 'fix' is correct and the best way to go about it, but I've included it below for your consideration.

kexec/arch/x86_64/kexec-elf-rel-x86_64.c renamed from kexec/arch/x86_64/kexec-elf-rel-x86_64.c.orig +1 -0
@@ -79,6 +79,7 @@ void machine_apply_elf_rel(struct mem_eh
 			goto overflow;
 		break;
 	case R_X86_64_PC32:
+	case R_X86_64_PLT32:
 		*(uint32_t *)location = value - address;
 		break;
 	default:

_______________________________________________
kexec mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/kexec

#1 lore raw
Quoted 19 lines · Chris Clayton

Hi.

I haven't rebooted my laptop with kexec for quite some time, but when I tried to this morning I got the error you will see in $SUBJECT. The error occurs with both kexec-tools-2.0.17 or -2.0.16 run on either 4.18.0-rc6+ (built from a git pull this morning) or 4.14.57 kernels.

I searched for "R_X86_64_PLT32" and found that there was a change to the kernel that may be related - b21ebf2fb4cde1618915a97cc773e287ff49173e x86: Treat R_X86_64_PLT32 as R_X86_64_PC32. So I replicated the change that patch made to arch/x86/kernel/machine_kexec_64.c in kexec/arch/x86_64/kexec-elf-rel-x86_64.c and kexec now reboots into the new kernel.

I don't know enough about relocations and the like to know whether my 'fix' is correct and the best way to go about it, but I've included it below for your consideration.

kexec/arch/x86_64/kexec-elf-rel-x86_64.c void machine_apply_elf_rel(struct mem_eh · line 82

Quoted 4 lines
kexec/arch/x86_64/kexec-elf-rel-x86_64.c renamed from kexec/arch/x86_64/kexec-elf-rel-x86_64.c.orig +1 -0
@@ -79,6 +79,7 @@ void machine_apply_elf_rel(struct mem_eh
 			goto overflow;
 		break;
 	case R_X86_64_PC32:
+	case R_X86_64_PLT32:

Looks like a good fix, could you make a formal patch, e.g rearrange the patch log, I woule like to ack it.

Quoted 8 lines
kexec/arch/x86_64/kexec-elf-rel-x86_64.c renamed from kexec/arch/x86_64/kexec-elf-rel-x86_64.c.orig +0 -0
 		*(uint32_t *)location = value - address;
 		break;
 	default:

_______________________________________________
kexec mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/kexec

_______________________________________________
kexec mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/kexec

#2 lore raw

kexec: fix for "Unhandled rela relocation: R_X86_64_PLT32" error

In response to a change in binutils, change b21ebf2fb4cde1618915a97cc773e287ff49173e (x86: Treat R_X86_64_PLT32 as R_X86_64_PC32) was applied to the linux kernel during the 4.16 development cycle and has since been backported to earlier stable kernel series. The change results in the failure message in $SUBJECT when rebooting via kexec.

Fix this by replicating the change in kexec.

---

kexec/arch/x86_64/kexec-elf-rel-x86_64.c renamed from kexec/arch/x86_64/kexec-elf-rel-x86_64.c.orig +1 -0
@@ -79,6 +79,7 @@ void machine_apply_elf_rel(struct mem_eh
 			goto overflow;
 		break;
 	case R_X86_64_PC32:
+	case R_X86_64_PLT32:
 		*(uint32_t *)location = value - address;
 		break;
 	default:

_______________________________________________
kexec mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/kexec

#3 lore raw

kexec: fix for "Unhandled rela relocation: R_X86_64_PLT32" error

In response to a change in binutils, commit b21ebf2fb4c (x86: Treat R_X86_64_PLT32 as R_X86_64_PC32) was applied to the linux kernel during the 4.16 development cycle and has since been backported to earlier stable kernel series. The change results in the failure message in $SUBJECT when rebooting via kexec.

Fix this by replicating the change in kexec.

---
 kexec/arch/x86_64/kexec-elf-rel-x86_64.c | 1 +
 1 file changed, 1 insertion(+)
kexec/arch/x86_64/kexec-elf-rel-x86_64.c +1 -0
index 7fdde73..db85b44 100644
@@ -79,6 +79,7 @@ void machine_apply_elf_rel(struct mem_ehdr *UNUSED(ehdr),
 			goto overflow;
 		break;
 	case R_X86_64_PC32: 
+	case R_X86_64_PLT32:
 		*(uint32_t *)location = value - address;
 		break;
 	default:
Signature · 7 lines
2.13.6


_______________________________________________
kexec mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/kexec
#4 lore raw

Re: kexec: fix for "Unhandled rela relocation: R_X86_64_PLT32" error

Hi Chris,

Quoted 10 lines · Baoquan He

In response to a change in binutils, commit b21ebf2fb4c (x86: Treat R_X86_64_PLT32 as R_X86_64_PC32) was applied to the linux kernel during the 4.16 development cycle and has since been backported to earlier stable kernel series. The change results in the failure message in $SUBJECT when rebooting via kexec.

Fix this by replicating the change in kexec.

I adjusted the patch log a little bit, you have tested it on upstream kernel, right?

Thanks
Baoquan

Quoted 24 lines
---
 kexec/arch/x86_64/kexec-elf-rel-x86_64.c | 1 +
 1 file changed, 1 insertion(+)
kexec/arch/x86_64/kexec-elf-rel-x86_64.c +1 -0
index 7fdde73..db85b44 100644
@@ -79,6 +79,7 @@ void machine_apply_elf_rel(struct mem_ehdr *UNUSED(ehdr),
 			goto overflow;
 		break;
 	case R_X86_64_PC32: 
+	case R_X86_64_PLT32:
 		*(uint32_t *)location = value - address;
 		break;
 	default:
Signature · 7 lines
2.13.6


_______________________________________________
kexec mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/kexec

_______________________________________________
kexec mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/kexec

#5 lore raw

Re: kexec: fix for "Unhandled rela relocation: R_X86_64_PLT32" error

Quoted 12 lines · Baoquan He

Hi Chris,

Quoted 9 lines · Baoquan He

In response to a change in binutils, commit b21ebf2fb4c (x86: Treat R_X86_64_PLT32 as R_X86_64_PC32) was applied to the linux kernel during the 4.16 development cycle and has since been backported to earlier stable kernel series. The change results in the failure message in $SUBJECT when rebooting via kexec.

Fix this by replicating the change in kexec.

OK.

Quoted 5 lines
Quoted 1 line

I adjusted the patch log a little bit, you have tested it on upstream kernel, right?

At the time of my original message (25 July 2018), 4.18.0-rc6+ was the latest upstream. I tested my change on that and on the latest stable 4.14 series kernel, which was 4.14.57. I've just tested it with 4.18.3 and 4.14.65 and it works fine. I don't have a 4.19 development kernel installed at the moment - I'm busy with other stuff.

Chris

Quoted 23 lines

Thanks
Baoquan

Quoted 20 lines
---
 kexec/arch/x86_64/kexec-elf-rel-x86_64.c | 1 +
 1 file changed, 1 insertion(+)
kexec/arch/x86_64/kexec-elf-rel-x86_64.c +1 -0
index 7fdde73..db85b44 100644
@@ -79,6 +79,7 @@ void machine_apply_elf_rel(struct mem_ehdr *UNUSED(ehdr),
 			goto overflow;
 		break;
 	case R_X86_64_PC32: 
+	case R_X86_64_PLT32:
 		*(uint32_t *)location = value - address;
 		break;
 	default:
Signature · 1 line
2.13.6
Quoted 4 lines
Quoted 4 lines

_______________________________________________
kexec mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/kexec

_______________________________________________
kexec mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/kexec

Acked-by
#6 lore raw

Re: kexec: fix for "Unhandled rela relocation: R_X86_64_PLT32" error

Quoted 20 lines · Chris Clayton
Quoted 12 lines · Baoquan He

Hi Chris,

Quoted 9 lines · Baoquan He

In response to a change in binutils, commit b21ebf2fb4c (x86: Treat R_X86_64_PLT32 as R_X86_64_PC32) was applied to the linux kernel during the 4.16 development cycle and has since been backported to earlier stable kernel series. The change results in the failure message in $SUBJECT when rebooting via kexec.

Fix this by replicating the change in kexec.

OK.

Quoted 2 lines
Quoted 1 line
Quoted 7 lines
Quoted 3 lines

I adjusted the patch log a little bit, you have tested it on upstream kernel, right?

At the time of my original message (25 July 2018), 4.18.0-rc6+ was the latest upstream. I tested my change on that and on the latest stable 4.14 series kernel, which was 4.14.57. I've just tested it with 4.18.3 and 4.14.65 and it works fine. I don't have a 4.19 development kernel installed at the moment - I'm busy with other stuff.

I think it's fine and enough, ack this patch.

By the way, feel free to repost with this format so that Simon won't miss it. And you can add my ack when you repost. Surely you can also wait for Simon or ping him later in this threaad.

Thanks
Baoquan

Quoted 25 lines
Quoted 25 lines

Thanks
Baoquan

Quoted 20 lines
---
 kexec/arch/x86_64/kexec-elf-rel-x86_64.c | 1 +
 1 file changed, 1 insertion(+)
kexec/arch/x86_64/kexec-elf-rel-x86_64.c +1 -0
index 7fdde73..db85b44 100644
@@ -79,6 +79,7 @@ void machine_apply_elf_rel(struct mem_ehdr *UNUSED(ehdr),
 			goto overflow;
 		break;
 	case R_X86_64_PC32: 
+	case R_X86_64_PLT32:
 		*(uint32_t *)location = value - address;
 		break;
 	default:
Signature · 1 line
2.13.6
Quoted 4 lines
Quoted 4 lines
Quoted 4 lines

_______________________________________________
kexec mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/kexec

_______________________________________________
kexec mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/kexec

#7 lore raw

Re: kexec: fix for "Unhandled rela relocation: R_X86_64_PLT32" error

In reply to Chris Clayton

Thanks for this fix Chris,

I have tested this fix on Fedora 29 and it works fine.

Quoted 38 lines · Chris Clayton
Quoted 12 lines · Baoquan He

Hi Chris,

Quoted 9 lines · Baoquan He

In response to a change in binutils, commit b21ebf2fb4c (x86: Treat R_X86_64_PLT32 as R_X86_64_PC32) was applied to the linux kernel during the 4.16 development cycle and has since been backported to earlier stable kernel series. The change results in the failure message in $SUBJECT when rebooting via kexec.

Fix this by replicating the change in kexec.

OK.

Quoted 5 lines
Quoted 1 line

I adjusted the patch log a little bit, you have tested it on upstream kernel, right?

At the time of my original message (25 July 2018), 4.18.0-rc6+ was the latest upstream. I tested my change on that and on the latest stable 4.14 series kernel, which was 4.14.57. I've just tested it with 4.18.3 and 4.14.65 and it works fine. I don't have a 4.19 development kernel installed at the moment - I'm busy with other stuff.

Chris

Quoted 7 lines

Thanks
Baoquan

Quoted 4 lines
---
 kexec/arch/x86_64/kexec-elf-rel-x86_64.c | 1 +
 1 file changed, 1 insertion(+)
Quoted 16 lines
Quoted 8 lines
Quoted 8 lines
kexec/arch/x86_64/kexec-elf-rel-x86_64.c +0 -0
index 7fdde73..db85b44 100644
@@ -79,6 +79,7 @@ void machine_apply_elf_rel(struct mem_ehdr *UNUSED(ehdr),
                     goto overflow;
             break;
     case R_X86_64_PC32:
Quoted 8 lines
Quoted 8 lines
kexec/arch/x86_64/kexec-elf-rel-x86_64.c +1 -1
+    case R_X86_64_PLT32:
             *(uint32_t *)location = value - address;
             break;
     default:
--

2.13.6

Hi Simon,

This patch fixes an important issue because of which both kdump and kexec have become non-operational with newer kernels (> 4.18)

We are seeing this issue with newer Fedora versions (for e.g. Fedora 29, please see <https://bugzilla.redhat.com/show_bug.cgi?id=1619122>
for details), so would request you to apply this as an 'urgent' fix to make sure that the kexec/kdump code keeps working fine with newer kernel versions as well.

I have tested this on a Fedora 29 x86_64 host and I no longer encounter the 'Unhandled rela relocation: R_X86_64_PLT32' error.

Please feel free to add to this patch:
Tested-by and Acked-by: Bhupesh Sharma <[email protected]>

Thanks,
Bhupesh

_______________________________________________
kexec mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/kexec

Acked-by Baoquan He Tested-by Bhupesh Sharma Acked-by Bhupesh Sharma
#8 lore raw

Re: kexec: fix for "Unhandled rela relocation: R_X86_64_PLT32" error

Quoted 71 lines · Bhupesh Sharma

Thanks for this fix Chris,

I have tested this fix on Fedora 29 and it works fine.

Quoted 38 lines · Chris Clayton
Quoted 12 lines · Baoquan He

Hi Chris,

Quoted 9 lines · Baoquan He

In response to a change in binutils, commit b21ebf2fb4c (x86: Treat R_X86_64_PLT32 as R_X86_64_PC32) was applied to the linux kernel during the 4.16 development cycle and has since been backported to earlier stable kernel series. The change results in the failure message in $SUBJECT when rebooting via kexec.

Fix this by replicating the change in kexec.

OK.

Quoted 5 lines
Quoted 1 line

I adjusted the patch log a little bit, you have tested it on upstream kernel, right?

At the time of my original message (25 July 2018), 4.18.0-rc6+ was the latest upstream. I tested my change on that and on the latest stable 4.14 series kernel, which was 4.14.57. I've just tested it with 4.18.3 and 4.14.65 and it works fine. I don't have a 4.19 development kernel installed at the moment - I'm busy with other stuff.

Chris

Quoted 7 lines

Thanks
Baoquan

Quoted 4 lines
---
 kexec/arch/x86_64/kexec-elf-rel-x86_64.c | 1 +
 1 file changed, 1 insertion(+)
Quoted 16 lines
Quoted 8 lines
Quoted 8 lines
kexec/arch/x86_64/kexec-elf-rel-x86_64.c +0 -0
index 7fdde73..db85b44 100644
@@ -79,6 +79,7 @@ void machine_apply_elf_rel(struct mem_ehdr *UNUSED(ehdr),
                     goto overflow;
             break;
     case R_X86_64_PC32:
Quoted 8 lines
Quoted 8 lines
kexec/arch/x86_64/kexec-elf-rel-x86_64.c +1 -1
+    case R_X86_64_PLT32:
             *(uint32_t *)location = value - address;
             break;
     default:
--

2.13.6

Hi Simon,

This patch fixes an important issue because of which both kdump and kexec have become non-operational with newer kernels (> 4.18)

We are seeing this issue with newer Fedora versions (for e.g. Fedora 29, please see <https://bugzilla.redhat.com/show_bug.cgi?id=1619122>
for details), so would request you to apply this as an 'urgent' fix to make sure that the kexec/kdump code keeps working fine with newer kernel versions as well.

Quoted 5 lines

I have tested this on a Fedora 29 x86_64 host and I no longer encounter the 'Unhandled rela relocation: R_X86_64_PLT32' error.

Please feel free to add to this patch:
Tested-by and Acked-by: Bhupesh Sharma <[email protected]>

Thanks, and apologies for the delay - I was travelling.

For some reason the patch did not apply cleanly so I did so by hand. The result is as follows:

From b9de21ef51a7ceab7122a707c188602eae22c4ee Mon Sep 17 00:00:00 2001
From: Chris Clayton <[email protected]>
Date: Mon, 20 Aug 2018 12:00:31 +0100
Subject: [PATCH] kexec: fix for "Unhandled rela relocation: R_X86_64_PLT32"
error

In response to a change in binutils, commit b21ebf2fb4c (x86: Treat R_X86_64_PLT32 as R_X86_64_PC32) was applied to the linux kernel during the 4.16 development cycle and has since been backported to earlier stable kernel series. The change results in the failure message in $SUBJECT when rebooting via kexec.

Fix this by replicating the change in kexec.

---
 kexec/arch/x86_64/kexec-elf-rel-x86_64.c | 1 +
 1 file changed, 1 insertion(+)
kexec/arch/x86_64/kexec-elf-rel-x86_64.c +1 -0
index 7fdde73a5eca..db85b443238d 100644
@@ -79,6 +79,7 @@ void machine_apply_elf_rel(struct mem_ehdr *UNUSED(ehdr),
 			goto overflow;
 		break;
 	case R_X86_64_PC32: 
+	case R_X86_64_PLT32:
 		*(uint32_t *)location = value - address;
 		break;
 	default:
Signature · 7 lines
2.11.0


_______________________________________________
kexec mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/kexec
#9 lore raw

Re: kexec: fix for "Unhandled rela relocation: R_X86_64_PLT32" error

Quoted 6 lines · Simon Horman

On Tue, Aug 21, 2018 at 04:51:49PM +0530, Bhupesh Sharma wrote:

Thanks, and apologies for the delay - I was travelling.

For some reason the patch did not apply cleanly so I did so by hand. The result is as follows:

Thanks a lot for your help, Simon. You can still take the 2 weeks as a period to merge patch, no hurry.

Thanks
Baoquan

Quoted 46 lines

From b9de21ef51a7ceab7122a707c188602eae22c4ee Mon Sep 17 00:00:00 2001
From: Chris Clayton <[email protected]>
Date: Mon, 20 Aug 2018 12:00:31 +0100
Subject: [PATCH] kexec: fix for "Unhandled rela relocation: R_X86_64_PLT32"
error

In response to a change in binutils, commit b21ebf2fb4c (x86: Treat R_X86_64_PLT32 as R_X86_64_PC32) was applied to the linux kernel during the 4.16 development cycle and has since been backported to earlier stable kernel series. The change results in the failure message in $SUBJECT when rebooting via kexec.

Fix this by replicating the change in kexec.

---
 kexec/arch/x86_64/kexec-elf-rel-x86_64.c | 1 +
 1 file changed, 1 insertion(+)
kexec/arch/x86_64/kexec-elf-rel-x86_64.c +1 -0
index 7fdde73a5eca..db85b443238d 100644
@@ -79,6 +79,7 @@ void machine_apply_elf_rel(struct mem_ehdr *UNUSED(ehdr),
 			goto overflow;
 		break;
 	case R_X86_64_PC32: 
+	case R_X86_64_PLT32:
 		*(uint32_t *)location = value - address;
 		break;
 	default:
Signature · 7 lines
2.11.0


_______________________________________________
kexec mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/kexec

_______________________________________________
kexec mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/kexec

#10 lore raw

Re: kexec: fix for "Unhandled rela relocation: R_X86_64_PLT32" error

In reply to Simon Horman

Hi Simon,

Quoted 75 lines · Simon Horman
Quoted 74 lines · Bhupesh Sharma

Thanks for this fix Chris,

I have tested this fix on Fedora 29 and it works fine.

Quoted 38 lines · Chris Clayton
Quoted 12 lines · Baoquan He

Hi Chris,

Quoted 9 lines · Baoquan He

In response to a change in binutils, commit b21ebf2fb4c (x86: Treat R_X86_64_PLT32 as R_X86_64_PC32) was applied to the linux kernel during the 4.16 development cycle and has since been backported to earlier stable kernel series. The change results in the failure message in $SUBJECT when rebooting via kexec.

Fix this by replicating the change in kexec.

OK.

Quoted 5 lines
Quoted 1 line

I adjusted the patch log a little bit, you have tested it on upstream kernel, right?

At the time of my original message (25 July 2018), 4.18.0-rc6+ was the latest upstream. I tested my change on that and on the latest stable 4.14 series kernel, which was 4.14.57. I've just tested it with 4.18.3 and 4.14.65 and it works fine. I don't have a 4.19 development kernel installed at the moment - I'm busy with other stuff.

Chris

Quoted 7 lines

Thanks
Baoquan

Quoted 4 lines
---
 kexec/arch/x86_64/kexec-elf-rel-x86_64.c | 1 +
 1 file changed, 1 insertion(+)
Quoted 16 lines
Quoted 8 lines
Quoted 8 lines
kexec/arch/x86_64/kexec-elf-rel-x86_64.c +0 -0
index 7fdde73..db85b44 100644
@@ -79,6 +79,7 @@ void machine_apply_elf_rel(struct mem_ehdr *UNUSED(ehdr),
                     goto overflow;
             break;
     case R_X86_64_PC32:
Quoted 8 lines
Quoted 8 lines
kexec/arch/x86_64/kexec-elf-rel-x86_64.c +1 -1
+    case R_X86_64_PLT32:
             *(uint32_t *)location = value - address;
             break;
     default:
--

2.13.6

Hi Simon,

This patch fixes an important issue because of which both kdump and kexec have become non-operational with newer kernels (> 4.18)

We are seeing this issue with newer Fedora versions (for e.g. Fedora 29, please see <https://bugzilla.redhat.com/show_bug.cgi?id=1619122>
for details), so would request you to apply this as an 'urgent' fix to make sure that the kexec/kdump code keeps working fine with newer kernel versions as well.

I have tested this on a Fedora 29 x86_64 host and I no longer encounter the 'Unhandled rela relocation: R_X86_64_PLT32' error.

Quoted 7 lines
Quoted 2 lines

Please feel free to add to this patch:
Tested-by and Acked-by: Bhupesh Sharma <[email protected]>

Thanks, and apologies for the delay - I was travelling.

For some reason the patch did not apply cleanly so I did so by hand. The result is as follows:

Thanks for your help. Yes the format looks fine and applies cleanly for me via 'git am'
Sorry to bother you during your travel, but this might affect folks using newer kernels so it might be useful to have this included in the tree.

Regards,
Bhupesh

Quoted 37 lines

From b9de21ef51a7ceab7122a707c188602eae22c4ee Mon Sep 17 00:00:00 2001
From: Chris Clayton <[email protected]>
Date: Mon, 20 Aug 2018 12:00:31 +0100
Subject: [PATCH] kexec: fix for "Unhandled rela relocation: R_X86_64_PLT32"
error

In response to a change in binutils, commit b21ebf2fb4c (x86: Treat R_X86_64_PLT32 as R_X86_64_PC32) was applied to the linux kernel during the 4.16 development cycle and has since been backported to earlier stable kernel series. The change results in the failure message in $SUBJECT when rebooting via kexec.

Fix this by replicating the change in kexec.

---
 kexec/arch/x86_64/kexec-elf-rel-x86_64.c | 1 +
 1 file changed, 1 insertion(+)
kexec/arch/x86_64/kexec-elf-rel-x86_64.c +1 -1
index 7fdde73a5eca..db85b443238d 100644
@@ -79,6 +79,7 @@ void machine_apply_elf_rel(struct mem_ehdr *UNUSED(ehdr),
                        goto overflow;
                break;
        case R_X86_64_PC32:
+       case R_X86_64_PLT32:
                *(uint32_t *)location = value - address;
                break;
        default:
--
Quoted 2 lines

2.11.0

_______________________________________________
kexec mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/kexec