migrate/ram: Fix resizing RAM blocks while migrating
v4 cover migrate/ram: Fix resizing RAM blocks while migrating
Basically a resend. Who's the lucky winner to pick this up for 5.1? :)
---
This is the follow up of
"[PATCH RFC] memory: Don't allow to resize RAM while migrating" [1]
This series contains some (slightly modified) patches also contained in:
"[PATCH v2 fixed 00/16] Ram blocks with resizable anonymous allocations
under POSIX" [2]
That series will be based on this series. The last patch (#13) in this series could be moved to the other series, but I decided to include it in here for now (similar context).
I realized that resizing RAM blocks while the guest is being migrated (precopy: resize while still running on the source, postcopy: resize
while already running on the target) is buggy. In case of precopy, we
can simply cancel migration. Postcopy handling is more involved. Resizing can currently happen during a guest reboot, triggered by ACPI rebuilds.
Along with the fixes, some cleanups.
[1] https://lkml.kernel.org/r/[email protected]
[2] https://lkml.kernel.org/r/[email protected]
v3 -> v4:
- Rebased and retested
- Added RBs
v2 -> v3:
- Rebased on current master
- Added RBs
- "migration/ram: Tolerate partially changed mappings in postcopy code" -- Extended the comment for the uffdio unregister part.
v1 -> v2:
- "util: vfio-helpers: Factor out and fix processing of existing ram blocks"
-- Stringify error
- "migraton/ram: Handle RAM block resizes during precopy"
-- Simplified check if we're migrating on the source
- "exec: Relax range check in ram_block_discard_range()"
-- Added to make discard during resizes actually work
- "migration/ram: Discard new RAM when growing RAM blocks after ram_postcopy_incoming_init()"
-- Better checks if in the right postcopy mode.
-- Better patch subject/description/comments
- "migration/ram: Handle RAM block resizes during postcopy" -- Better comments
-- Adapt to changed postcopy checks
- "migrate/ram: Get rid of "place_source" in ram_load_postcopy()" -- Dropped, as broken
- "migration/ram: Tolerate partially changed mappings in postcopy code" -- Better comment / description. Clarify that no implicit wakeup will happen
-- Warn on EINVAL (older kernels)
-- Wake up any waiter explicitly
David Hildenbrand (13):
util: vfio-helpers: Factor out and fix processing of existing ram
blocks
stubs/ram-block: Remove stubs that are no longer needed
numa: Teach ram block notifiers about resizeable ram blocks
numa: Make all callbacks of ram block notifiers optional migration/ram: Handle RAM block resizes during precopy
exec: Relax range check in ram_block_discard_range() migration/ram: Discard RAM when growing RAM blocks after
ram_postcopy_incoming_init()
migration/ram: Simplify host page handling in ram_load_postcopy() migration/ram: Consolidate variable reset after placement in
ram_load_postcopy()
migration/ram: Handle RAM block resizes during postcopy migration/multifd: Print used_length of memory block migration/ram: Use offset_in_ramblock() in range checks migration/ram: Tolerate partially changed mappings in postcopy code
exec.c | 25 +++++-- hw/core/numa.c | 41 +++++++++-- hw/i386/xen/xen-mapcache.c | 7 +- include/exec/cpu-common.h | 1 + include/exec/memory.h | 10 +-- include/exec/ramblock.h | 10 +++ include/exec/ramlist.h | 13 ++-- migration/migration.c | 9 ++- migration/migration.h | 1 + migration/multifd.c | 2 +- migration/postcopy-ram.c | 54 +++++++++++++- migration/ram.c | 144 ++++++++++++++++++++++++++++--------- stubs/ram-block.c | 20 ------ target/i386/hax-mem.c | 5 +- target/i386/sev.c | 18 ++--- util/vfio-helpers.c | 41 ++++------- 16 files changed, 283 insertions(+), 118 deletions(-)
Signature · 1 line
2.25.1
PATCH v4 1/13 util: vfio-helpers: Factor out and fix processing of existing ram blocks
Factor it out into common code when a new notifier is registered, just as done with the memory region notifier. This allows us to have the logic about how to process existing ram blocks at a central place (which will be extended soon).
Just like when adding a new ram block, we have to register the max_length for now. We don't have a way to get notified about resizes yet, and some memory would not be mapped when growing the ram block.
Note: Currently, ram blocks are only "fake resized". All memory (max_length) is accessible.
We can get rid of a bunch of functions in stubs/ram-block.c . Print the warning from inside qemu_vfio_ram_block_added().
--- exec.c | 5 +++++ hw/core/numa.c | 14 ++++++++++++++ include/exec/cpu-common.h | 1 + util/vfio-helpers.c | 29 ++++++++--------------------- 4 files changed, 28 insertions(+), 21 deletions(-)
exec.c +5 -0
@@ -1966,6 +1966,11 @@ ram_addr_t qemu_ram_get_used_length(RAMBlock *rb)return rb->used_length; } +ram_addr_t qemu_ram_get_max_length (RAMBlock *rb) +{ +return rb->max_length; +} +bool qemu_ram_is_shared (RAMBlock *rb) {return rb->flags &RAM_SHARED ;
hw/core/numa.c +14 -0
@@ -854,9 +854,23 @@ void query_numa_node_mem(NumaNodeMem node_mem[], MachineState *ms) } } +static int ram_block_notify_add_single (RAMBlock *rb,void *opaque) +{ +const ram_addr_t max_size =qemu_ram_get_max_length (rb); +void *host =qemu_ram_get_host_addr (rb); +RAMBlockNotifier *notifier = opaque; + +if (host) { + notifier->ram_block_added (notifier, host, max_size); + } +return 0 ; +} +void ram_block_notifier_add (RAMBlockNotifier *n) {QLIST_INSERT_HEAD (&ram_list.ramblock_notifiers, n, next); +/* Notify about all existing ram blocks. */ +qemu_ram_foreach_block (ram_block_notify_add_single, n); }void ram_block_notifier_remove (RAMBlockNotifier *n)
include/exec/cpu-common.h +1 -0
@@ -59,6 +59,7 @@ const char *qemu_ram_get_idstr(RAMBlock *rb);void *qemu_ram_get_host_addr (RAMBlock *rb);ram_addr_t qemu_ram_get_offset (RAMBlock *rb);ram_addr_t qemu_ram_get_used_length (RAMBlock *rb); +ram_addr_t qemu_ram_get_max_length (RAMBlock *rb);bool qemu_ram_is_shared (RAMBlock *rb);bool qemu_ram_is_uf_zeroable (RAMBlock *rb);void qemu_ram_set_uf_zeroable (RAMBlock *rb);
util/vfio-helpers.c +8 -21
@@ -376,8 +376,14 @@ static void qemu_vfio_ram_block_added(RAMBlockNotifier *n, void *host, size_t size) {QEMUVFIOState *s =container_of (n, QEMUVFIOState, ram_notifier); +int ret; +trace_qemu_vfio_ram_block_added (s, host, size); -qemu_vfio_dma_map (s, host, size, false,NULL ); + ret =qemu_vfio_dma_map (s, host, size, false,NULL ); +if (ret) { +error_report ("qemu_vfio_dma_map(%p, %zu) failed: %s" , host, size, +strerror (-ret)); + } } static void qemu_vfio_ram_block_removed(RAMBlockNotifier *n,
@@ -390,33 +396,14 @@ static void qemu_vfio_ram_block_removed(RAMBlockNotifier *n, } } -static int qemu_vfio_init_ramblock (RAMBlock *rb,void *opaque) -{ -void *host_addr =qemu_ram_get_host_addr (rb); -ram_addr_t length =qemu_ram_get_used_length (rb); -int ret; -QEMUVFIOState *s = opaque; - -if (!host_addr) { -return 0 ; - } - ret =qemu_vfio_dma_map (s, host_addr, length, false,NULL ); -if (ret) { -fprintf (stderr,"qemu_vfio_init_ramblock: failed %p %" PRId64"\n" , - host_addr, (uint64_t )length); - } -return 0 ; -} -static void qemu_vfio_open_common (QEMUVFIOState *s) {qemu_mutex_init (&s->lock); s->ram_notifier.ram_block_added = qemu_vfio_ram_block_added; s->ram_notifier.ram_block_removed = qemu_vfio_ram_block_removed; -ram_block_notifier_add (&s->ram_notifier); s->low_water_mark =QEMU_VFIO_IOVA_MIN ; s->high_water_mark =QEMU_VFIO_IOVA_MAX ; -qemu_ram_foreach_block (qemu_vfio_init_ramblock, s); +ram_block_notifier_add (&s->ram_notifier); }/**
Signature · 1 line
2.25.1
PATCH v4 2/13 stubs/ram-block: Remove stubs that are no longer needed
In reply to David HildenbrandCurrent code no longer needs these stubs to compile. Let's just remove them.
--- stubs/ram-block.c | 20 -------------------- 1 file changed, 20 deletions(-)
stubs/ram-block.c +0 -20
@@ -2,21 +2,6 @@#include "exec/ramlist.h" #include "exec/cpu-common.h" -void *qemu_ram_get_host_addr (RAMBlock *rb) -{ -return 0 ; -} - -ram_addr_t qemu_ram_get_offset (RAMBlock *rb) -{ -return 0 ; -} - -ram_addr_t qemu_ram_get_used_length (RAMBlock *rb) -{ -return 0 ; -} -void ram_block_notifier_add (RAMBlockNotifier *n) { }
@@ -24,8 +9,3 @@ void ram_block_notifier_add(RAMBlockNotifier *n)void ram_block_notifier_remove (RAMBlockNotifier *n) { } - -int qemu_ram_foreach_block (RAMBlockIterFunc func,void *opaque) -{ -return 0 ; -}
Signature · 1 line
2.25.1
PATCH v4 3/13 numa: Teach ram block notifiers about resizeable ram blocks
In reply to David HildenbrandRam block notifiers are currently not aware of resizes. Especially to handle resizes during migration, but also to implement actually resizeable ram blocks (make everything between used_length and max_length inaccessible), we want to teach ram block notifiers about resizeable ram.
Introduce the basic infrastructure but keep using max_size in the existing notifiers. Supply the max_size when adding and removing ram blocks. Also, notify on resizes.
--- exec.c | 11 +++++++++-- hw/core/numa.c | 22 +++++++++++++++++----- hw/i386/xen/xen-mapcache.c | 7 ++++--- include/exec/ramlist.h | 13 +++++++++---- target/i386/hax-mem.c | 5 +++-- target/i386/sev.c | 18 ++++++++++-------- util/vfio-helpers.c | 16 ++++++++-------- 7 files changed, 60 insertions(+), 32 deletions(-)
exec.c +9 -2
@@ -2115,6 +2115,11 @@ int qemu_ram_resize(RAMBlock *block, ram_addr_t newsize, Error **errp)return -EINVAL ; } +/* Notify before modifying the ram block and touching the bitmaps. */ +if (block->host) { +ram_block_notify_resize (block->host, block->used_length, newsize); + } +cpu_physical_memory_clear_dirty_range (block->offset, block->used_length); block->used_length = newsize; cpu_physical_memory_set_dirty_range(block->offset, block->used_length,
@@ -2281,7 +2286,8 @@ static void ram_block_add(RAMBlock *new_block, Error **errp, bool shared)qemu_madvise (new_block->host, new_block->max_length,QEMU_MADV_DONTFORK ); } -ram_block_notify_add (new_block->host, new_block->max_length); +ram_block_notify_add (new_block->host, new_block->used_length, + new_block->max_length); } }
@@ -2461,7 +2467,8 @@ void qemu_ram_free(RAMBlock *block) }if (block->host) { -ram_block_notify_remove (block->host, block->max_length); +ram_block_notify_remove (block->host, block->used_length, + block->max_length); }qemu_mutex_lock_ramlist ();
hw/core/numa.c +17 -5
@@ -857,11 +857,12 @@ void query_numa_node_mem(NumaNodeMem node_mem[], MachineState *ms)static int ram_block_notify_add_single (RAMBlock *rb,void *opaque) {const ram_addr_t max_size =qemu_ram_get_max_length (rb); +const ram_addr_t size =qemu_ram_get_used_length (rb);void *host =qemu_ram_get_host_addr (rb);RAMBlockNotifier *notifier = opaque;if (host) { - notifier->ram_block_added (notifier, host, max_size); + notifier->ram_block_added (notifier, host, size, max_size); }return 0 ; }
@@ -878,20 +879,31 @@ void ram_block_notifier_remove(RAMBlockNotifier *n)QLIST_REMOVE (n, next); } -void ram_block_notify_add (void *host,size_t size) +void ram_block_notify_add (void *host,size_t size,size_t max_size) {RAMBlockNotifier *notifier; QLIST_FOREACH(notifier, &ram_list.ramblock_notifiers, next) { - notifier->ram_block_added (notifier, host, size); + notifier->ram_block_added (notifier, host, size, max_size); } } -void ram_block_notify_remove (void *host,size_t size) +void ram_block_notify_remove (void *host,size_t size,size_t max_size) {RAMBlockNotifier *notifier; QLIST_FOREACH(notifier, &ram_list.ramblock_notifiers, next) { - notifier->ram_block_removed (notifier, host, size); + notifier->ram_block_removed (notifier, host, size, max_size); + } +} + +void ram_block_notify_resize (void *host,size_t old_size,size_t new_size) +{ +RAMBlockNotifier *notifier; + + QLIST_FOREACH(notifier, &ram_list.ramblock_notifiers, next) { +if (notifier->ram_block_resized) { + notifier->ram_block_resized (notifier, host, old_size, new_size); + } } }
hw/i386/xen/xen-mapcache.c +4 -3
@@ -169,7 +169,8 @@ static void xen_remap_bucket(MapCacheEntry *entry,if (entry->vaddr_base !=NULL ) {if (!(entry->flags &XEN_MAPCACHE_ENTRY_DUMMY )) { -ram_block_notify_remove (entry->vaddr_base, entry->size); +ram_block_notify_remove (entry->vaddr_base, entry->size, + entry->size); }if (munmap (entry->vaddr_base, entry->size) !=0 ) {perror ("unmap fails" );
@@ -211,7 +212,7 @@ static void xen_remap_bucket(MapCacheEntry *entry, }if (!(entry->flags &XEN_MAPCACHE_ENTRY_DUMMY )) { -ram_block_notify_add (vaddr_base, size); +ram_block_notify_add (vaddr_base, size, size); } entry->vaddr_base = vaddr_base;
@@ -452,7 +453,7 @@ static void xen_invalidate_map_cache_entry_unlocked(uint8_t *buffer) } pentry->next = entry->next; -ram_block_notify_remove (entry->vaddr_base, entry->size); +ram_block_notify_remove (entry->vaddr_base, entry->size, entry->size);if (munmap (entry->vaddr_base, entry->size) !=0 ) {perror ("unmap fails" );exit (-1 );
include/exec/ramlist.h +9 -4
@@ -65,15 +65,20 @@ void qemu_mutex_lock_ramlist(void);void qemu_mutex_unlock_ramlist (void );struct RAMBlockNotifier { -void (*ram_block_added)(RAMBlockNotifier *n,void *host,size_t size); -void (*ram_block_removed)(RAMBlockNotifier *n,void *host,size_t size); +void (*ram_block_added)(RAMBlockNotifier *n,void *host,size_t size, +size_t max_size); +void (*ram_block_removed)(RAMBlockNotifier *n,void *host,size_t size, +size_t max_size); +void (*ram_block_resized)(RAMBlockNotifier *n,void *host,size_t old_size, +size_t new_size);QLIST_ENTRY (RAMBlockNotifier) next; };void ram_block_notifier_add (RAMBlockNotifier *n);void ram_block_notifier_remove (RAMBlockNotifier *n); -void ram_block_notify_add (void *host,size_t size); -void ram_block_notify_remove (void *host,size_t size); +void ram_block_notify_add (void *host,size_t size,size_t max_size); +void ram_block_notify_remove (void *host,size_t size,size_t max_size); +void ram_block_notify_resize (void *host,size_t old_size,size_t new_size);void ram_block_dump (Monitor *mon);
target/i386/hax-mem.c +3 -2
@@ -293,7 +293,8 @@ static MemoryListener hax_memory_listener = { .priority = 10, }; -static void hax_ram_block_added (RAMBlockNotifier *n,void *host,size_t size) +static void hax_ram_block_added (RAMBlockNotifier *n,void *host,size_t size, +size_t max_size) {/* * We must register each RAM block with the HAXM kernel module, or
@@ -304,7 +305,7 @@ static void hax_ram_block_added(RAMBlockNotifier *n, void *host, size_t size)* host physical pages for the RAM block as part of this registration * process, hence the name hax_populate_ram(). */ -if (hax_populate_ram ((uint64_t )(uintptr_t )host, size) <0 ) { +if (hax_populate_ram ((uint64_t )(uintptr_t )host, max_size) <0 ) {fprintf (stderr,"HAX failed to populate RAM\n" );abort (); }
target/i386/sev.c +10 -8
@@ -129,7 +129,8 @@ sev_set_guest_state(SevState new_state) }static void -sev_ram_block_added (RAMBlockNotifier *n,void *host,size_t size) +sev_ram_block_added (RAMBlockNotifier *n,void *host,size_t size, +size_t max_size) {int r;struct kvm_enc_region range;
@@ -146,19 +147,20 @@ sev_ram_block_added(RAMBlockNotifier *n, void *host, size_t size) } range.addr = (__u64 )(unsigned long )host; - range.size = size; + range.size = max_size; -trace_kvm_memcrypt_register_region (host, size); +trace_kvm_memcrypt_register_region (host, max_size); r =kvm_vm_ioctl (kvm_state,KVM_MEMORY_ENCRYPT_REG_REGION , &range);if (r) {error_report ("%s: failed to register region (%p+%#zx) error '%s'" , - __func__, host, size,strerror (errno)); + __func__, host, max_size,strerror (errno));exit (1 ); } }static void -sev_ram_block_removed (RAMBlockNotifier *n,void *host,size_t size) +sev_ram_block_removed (RAMBlockNotifier *n,void *host,size_t size, +size_t max_size) {int r;struct kvm_enc_region range;
@@ -175,13 +177,13 @@ sev_ram_block_removed(RAMBlockNotifier *n, void *host, size_t size) } range.addr = (__u64 )(unsigned long )host; - range.size = size; + range.size = max_size; -trace_kvm_memcrypt_unregister_region (host, size); +trace_kvm_memcrypt_unregister_region (host, max_size); r =kvm_vm_ioctl (kvm_state,KVM_MEMORY_ENCRYPT_UNREG_REGION , &range);if (r) {error_report ("%s: failed to unregister region (%p+%#zx)" , - __func__, host, size); + __func__, host, max_size); } }
util/vfio-helpers.c +8 -8
@@ -372,26 +372,26 @@ fail_container:return ret; } -static void qemu_vfio_ram_block_added (RAMBlockNotifier *n, -void *host,size_t size) +static void qemu_vfio_ram_block_added (RAMBlockNotifier *n,void *host, +size_t size,size_t max_size) {QEMUVFIOState *s =container_of (n, QEMUVFIOState, ram_notifier);int ret; -trace_qemu_vfio_ram_block_added (s, host, size); - ret =qemu_vfio_dma_map (s, host, size, false,NULL ); +trace_qemu_vfio_ram_block_added (s, host, max_size); + ret =qemu_vfio_dma_map (s, host, max_size, false,NULL );if (ret) { -error_report ("qemu_vfio_dma_map(%p, %zu) failed: %s" , host, size, +error_report ("qemu_vfio_dma_map(%p, %zu) failed: %s" , host, max_size,strerror (-ret)); } } -static void qemu_vfio_ram_block_removed (RAMBlockNotifier *n, -void *host,size_t size) +static void qemu_vfio_ram_block_removed (RAMBlockNotifier *n,void *host, +size_t size,size_t max_size) {QEMUVFIOState *s =container_of (n, QEMUVFIOState, ram_notifier);if (host) { -trace_qemu_vfio_ram_block_removed (s, host, size); +trace_qemu_vfio_ram_block_removed (s, host, max_size);qemu_vfio_dma_unmap (s, host); } }
Signature · 1 line
2.25.1
PATCH v4 4/13 numa: Make all callbacks of ram block notifiers optional
In reply to David HildenbrandLet's make add/remove optional. We want to introduce a RAM block notifier for RAM migration, that's only interested in resizes.
--- hw/core/numa.c | 13 ++++++++++--- 1 file changed, 10 insertions(+), 3 deletions(-)
hw/core/numa.c +10 -3
@@ -870,8 +870,11 @@ static int ram_block_notify_add_single(RAMBlock *rb, void *opaque)void ram_block_notifier_add (RAMBlockNotifier *n) {QLIST_INSERT_HEAD (&ram_list.ramblock_notifiers, n, next); +/* Notify about all existing ram blocks. */ -qemu_ram_foreach_block (ram_block_notify_add_single, n); +if (n->ram_block_added) { +qemu_ram_foreach_block (ram_block_notify_add_single, n); + } }void ram_block_notifier_remove (RAMBlockNotifier *n)
@@ -884,7 +887,9 @@ void ram_block_notify_add(void *host, size_t size, size_t max_size)RAMBlockNotifier *notifier; QLIST_FOREACH(notifier, &ram_list.ramblock_notifiers, next) { - notifier->ram_block_added (notifier, host, size, max_size); +if (notifier->ram_block_added) { + notifier->ram_block_added (notifier, host, size, max_size); + } } }
@@ -893,7 +898,9 @@ void ram_block_notify_remove(void *host, size_t size, size_t max_size)RAMBlockNotifier *notifier; QLIST_FOREACH(notifier, &ram_list.ramblock_notifiers, next) { - notifier->ram_block_removed (notifier, host, size, max_size); +if (notifier->ram_block_removed) { + notifier->ram_block_removed (notifier, host, size, max_size); + } } }
Signature · 1 line
2.25.1
PATCH v4 5/13 migration/ram: Handle RAM block resizes during precopy
In reply to David HildenbrandResizing while migrating is dangerous and does not work as expected. The whole migration code works on the usable_length of ram blocks and does not expect this to change at random points in time.
In the case of precopy, the ram block size must not change on the source, after syncing the RAM block list in ram_save_setup(), so as long as the guest is still running on the source.
Resizing can be trigger *after* (but not during) a reset in ACPI code by the guest
- hw/arm/virt-acpi-build.c:acpi_ram_update()
- hw/i386/acpi-build.c:acpi_ram_update()
Use the ram block notifier to get notified about resizes. Let's simply cancel migration and indicate the reason. We'll continue running on the source. No harm done.
Update the documentation. Postcopy will be handled separately.
--- exec.c | 5 +++-- include/exec/memory.h | 10 ++++++---- migration/migration.c | 9 +++++++-- migration/migration.h | 1 + migration/ram.c | 31 +++++++++++++++++++++++++++++++ 5 files changed, 48 insertions(+), 8 deletions(-)
exec.c +3 -2
@@ -2070,8 +2070,9 @@ static int memory_try_enable_merging(void *addr, size_t len)return qemu_madvise (addr, len,QEMU_MADV_MERGEABLE ); } -/* Only legal before guest might have detected the memory size: e.g. on -* incoming migration, or right after reset. +/* +* Resizing RAM while migrating can result in the migration being canceled. +* Care has to be taken if the guest might have already detected the memory. * * As memory core doesn't know how is memory accessed, it is up to * resize callback to update device state and/or add assertions to detect
include/exec/memory.h +6 -4
@@ -113,7 +113,7 @@ typedef struct IOMMUNotifier IOMMUNotifier;#define RAM_SHARED (1 << 1)/* Only a portion of RAM (used_length) is actually used, and migrated. -* This used_length size can change across reboots. +* Resizing RAM while migrating can result in the migration being canceled. */ #define RAM_RESIZEABLE (1 << 2)
@@ -843,7 +843,9 @@ void memory_region_init_ram_shared_nomigrate(MemoryRegion *mr,* RAM. Accesses into the region will * modify memory directly. Only an initial * portion of this RAM is actually used. -* The used size can change across reboots. +* Changing the size while migrating +* can result in the migration being +* canceled. * * @mr: the #MemoryRegion to be initialized. * @owner: the object that tracks the region's reference count
@@ -1464,8 +1466,8 @@ void *memory_region_get_ram_ptr(MemoryRegion *mr);/* memory_region_ram_resize: Resize a RAM region. * -* Only legal before guest might have detected the memory size: e.g. on -* incoming migration, or right after reset. +* Resizing RAM while migrating can result in the migration being canceled. +* Care has to be taken if the guest might have already detected the memory. * * @mr: a memory region created with @memory_region_init_resizeable_ram. * @newsize: the new size the region
migration/migration.c +7 -2
@@ -181,13 +181,18 @@ void migration_object_init(void) } } +void migration_cancel (void ) +{ +migrate_fd_cancel (current_migration); +} +void migration_shutdown (void ) {/* * Cancel the current migration - that will (eventually) * stop the migration using this structure */ -migrate_fd_cancel (current_migration); +migration_cancel ();object_unref (OBJECT (current_migration)); }
@@ -2066,7 +2071,7 @@ void qmp_migrate(const char *uri, bool has_blk, bool blk,void qmp_migrate_cancel (Error **errp) { -migrate_fd_cancel (migrate_get_current ()); +migration_cancel (); }void qmp_migrate_continue (MigrationStatus state,Error **errp)
migration/migration.h +1 -0
@@ -346,5 +346,6 @@ int foreach_not_ignored_block(RAMBlockIterFunc func, void *opaque);void migration_make_urgent_request (void );void migration_consume_urgent_request (void );bool migration_rate_limit (void ); +void migration_cancel (void );#endif
migration/ram.c +31 -0
@@ -52,6 +52,7 @@#include "migration/colo.h" #include "block.h" #include "sysemu/sysemu.h" +#include "sysemu/runstate.h" #include "savevm.h" #include "qemu/iov.h" #include "multifd.h"
@@ -3752,8 +3753,38 @@ static SaveVMHandlers savevm_ram_handlers = { .resume_prepare = ram_resume_prepare, }; +static void ram_mig_ram_block_resized (RAMBlockNotifier *n,void *host, +size_t old_size,size_t new_size) +{ +ram_addr_t offset; +Error *err =NULL ; +RAMBlock *rb =qemu_ram_block_from_host (host, false, &offset); + +if (ramblock_is_ignored (rb)) { +return ; + } + +if (!migration_is_idle ()) { +/* +* Precopy code on the source cannot deal with the size of RAM blocks +* changing at random points in time - especially after sending the +* RAM block sizes to the migration stream, they must no longer change. +* Abort and indicate a proper reason. +*/ +error_setg (&err,"RAM block '%s' resized during precopy." , rb->idstr); +migrate_set_error (migrate_get_current (), err); +error_free (err); +migration_cancel (); + } +} + +static RAMBlockNotifier ram_mig_ram_notifier = { + .ram_block_resized = ram_mig_ram_block_resized, +}; +void ram_mig_init (void ) {qemu_mutex_init (&XBZRLE .lock);register_savevm_live ("ram" ,0 ,4 , &savevm_ram_handlers, &ram_state); +ram_block_notifier_add (&ram_mig_ram_notifier); }
Signature · 1 line
2.25.1
PATCH v4 6/13 exec: Relax range check in ram_block_discard_range()
In reply to David HildenbrandWe want to make use of ram_block_discard_range() in the RAM block resize callback when growing a RAM block, *before* used_length is changed. Let's relax the check. We always have a reserved mapping for the whole max_length, so we cannot corrupt unrelated data.
--- exec.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
exec.c +2 -2
@@ -3887,7 +3887,7 @@ int ram_block_discard_range(RAMBlock *rb, uint64_t start, size_t length) goto err; } -if ((start + length) <= rb->used_length) { +if ((start + length) <= rb->max_length) {bool need_madvise, need_fallocate;if (!QEMU_IS_ALIGNED (length, rb->page_size)) { error_report("ram_block_discard_range: Unaligned length: %zx",
@@ -3954,7 +3954,7 @@ int ram_block_discard_range(RAMBlock *rb, uint64_t start, size_t length) }else {error_report ("ram_block_discard_range: Overrun block '%s' (%" PRIu64"/%zx/" RAM_ADDR_FMT ")" , - rb->idstr, start, length, rb->used_length); + rb->idstr, start, length, rb->max_length); } err:
Signature · 1 line
2.25.1
PATCH v4 7/13 migration/ram: Discard RAM when growing RAM blocks after ram_postcopy_incoming_init()
In reply to David HildenbrandIn case we grow our RAM after ram_postcopy_incoming_init() (e.g., when synchronizing the RAM block state with the migration source), the resized part would not get discarded. Let's perform that when being notified about a resize while postcopy has been advised, but is not listening yet. With precopy, the process is as following:
1. VM created
- RAM blocks are created
2. Incomming migration started
- Postcopy is advised
- All pages in RAM blocks are discarded
3. Precopy starts
- RAM blocks are resized to match the size on the migration source.
- RAM pages from precopy stream are loaded
- Uffd handler is registered, postcopy starts listening
4. Guest started, postcopy running
- Pagefaults get resolved, pages get placed
--- migration/ram.c | 30 ++++++++++++++++++++++++++++++ 1 file changed, 30 insertions(+)
migration/ram.c +30 -0
@@ -3756,6 +3756,7 @@ static SaveVMHandlers savevm_ram_handlers = {static void ram_mig_ram_block_resized (RAMBlockNotifier *n,void *host,size_t old_size,size_t new_size) { +PostcopyState ps =postcopy_state_get ();ram_addr_t offset;Error *err =NULL ;RAMBlock *rb =qemu_ram_block_from_host (host, false, &offset);
@@ -3776,6 +3777,35 @@ static void ram_mig_ram_block_resized(RAMBlockNotifier *n, void *host,error_free (err);migration_cancel (); } + +switch (ps) { +case POSTCOPY_INCOMING_ADVISE : +/* +* Update what ram_postcopy_incoming_init()->init_range() does at the +* time postcopy was advised. Syncing RAM blocks with the source will +* result in RAM resizes. +*/ +if (old_size < new_size) { +if (ram_discard_range (rb->idstr, old_size, new_size - old_size)) { +error_report ("RAM block '%s' discard of resized RAM failed" , + rb->idstr); + } + } +break ; +case POSTCOPY_INCOMING_NONE : +case POSTCOPY_INCOMING_RUNNING : +case POSTCOPY_INCOMING_END : +/* +* Once our guest is running, postcopy does no longer care about +* resizes. When growing, the new memory was not available on the +* source, no handler needed. +*/ +break ; +default : +error_report ("RAM block '%s' resized during postcopy state: %d" , + rb->idstr, ps); +exit (-1 ); + } }static RAMBlockNotifier ram_mig_ram_notifier = {
Signature · 1 line
2.25.1
PATCH v4 8/13 migration/ram: Simplify host page handling in ram_load_postcopy()
In reply to David HildenbrandAdd two new helper functions. This will in come handy once we want to handle ram block resizes while postcopy is active.
Note that ram_block_from_stream() will already print proper errors.
--- migration/ram.c | 54 ++++++++++++++++++++++++++++--------------------- 1 file changed, 31 insertions(+), 23 deletions(-)
migration/ram.c +31 -23
@@ -2743,6 +2743,20 @@ static inline void *host_from_ram_block_offset(RAMBlock *block,return block->host + offset; } +static void *host_page_from_ram_block_offset (RAMBlock *block, +ram_addr_t offset) +{ +/* Note: Explicitly no check against offset_in_ramblock(). */ +return (void *)QEMU_ALIGN_DOWN ((uintptr_t )block->host + offset, + block->page_size); +} + +static ram_addr_t host_page_offset_from_ram_block_offset (RAMBlock *block, +ram_addr_t offset) +{ +return ((uintptr_t )block->host + offset) & (block->page_size -1 ); +} +static inline void *colo_cache_from_block_offset (RAMBlock *block,ram_addr_t offset,bool record_bitmap) {
@@ -3135,13 +3149,12 @@ static int ram_load_postcopy(QEMUFile *f)MigrationIncomingState *mis =migration_incoming_get_current ();/* Temporary page that is later 'placed' */ void *postcopy_host_page = mis->postcopy_tmp_page; -void *this_host =NULL ; +void *host_page =NULL ;bool all_zero = false;int target_pages =0 ;while (!ret && !(flags &RAM_SAVE_FLAG_EOS )) {ram_addr_t addr; -void *host =NULL ;void *page_buffer =NULL ;void *place_source =NULL ;RAMBlock *block =NULL ;
@@ -3167,9 +3180,12 @@ static int ram_load_postcopy(QEMUFile *f)if (flags & (RAM_SAVE_FLAG_ZERO |RAM_SAVE_FLAG_PAGE |RAM_SAVE_FLAG_COMPRESS_PAGE )) { block =ram_block_from_stream (f, flags); +if (!block) { + ret = -EINVAL ; +break ; + } - host =host_from_ram_block_offset (block, addr); -if (!host) { +if (!offset_in_ramblock (block, addr)) {error_report ("Illegal RAM offset " RAM_ADDR_FMT , addr); ret = -EINVAL ;break ;
@@ -3187,21 +3203,18 @@ static int ram_load_postcopy(QEMUFile *f)* of a host page in one chunk. */ page_buffer = postcopy_host_page + - ((uintptr_t )host & (block->page_size -1 )); +host_page_offset_from_ram_block_offset (block, addr);/* If all TP are zero then we can optimise the place */ if (target_pages ==1 ) { all_zero = true; - this_host = (void *)QEMU_ALIGN_DOWN ((uintptr_t )host, - block->page_size); - }else { + host_page =host_page_from_ram_block_offset (block, addr); + }else if (host_page !=host_page_from_ram_block_offset (block, + addr)) {/* not the 1st TP within the HP */ -if (QEMU_ALIGN_DOWN ((uintptr_t )host, block->page_size) != - (uintptr_t )this_host) { -error_report ("Non-same host page %p/%p" , - host, this_host); - ret = -EINVAL ; -break ; - } +error_report ("Non-same host page %p/%p" , host_page, +host_page_from_ram_block_offset (block, addr)); + ret = -EINVAL ; +break ; }/*
@@ -3281,16 +3294,11 @@ static int ram_load_postcopy(QEMUFile *f) }if (!ret && place_needed) { -/* This gets called at the last target page in the host page */ -void *place_dest = (void *)QEMU_ALIGN_DOWN ((uintptr_t )host, - block->page_size); -if (all_zero) { - ret =postcopy_place_page_zero (mis, place_dest, - block); + ret =postcopy_place_page_zero (mis, host_page, block); }else { - ret =postcopy_place_page (mis, place_dest, - place_source, block); + ret =postcopy_place_page (mis, host_page, place_source, + block); } } }
Signature · 1 line
2.25.1
PATCH v4 9/13 migration/ram: Consolidate variable reset after placement in ram_load_postcopy()
In reply to David HildenbrandLet's consolidate resetting the variables.
--- migration/ram.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)
migration/ram.c +5 -5
@@ -3150,7 +3150,7 @@ static int ram_load_postcopy(QEMUFile *f)/* Temporary page that is later 'placed' */ void *postcopy_host_page = mis->postcopy_tmp_page;void *host_page =NULL ; -bool all_zero = false; +bool all_zero = true;int target_pages =0 ;while (!ret && !(flags &RAM_SAVE_FLAG_EOS )) {
@@ -3176,7 +3176,6 @@ static int ram_load_postcopy(QEMUFile *f) addr &=TARGET_PAGE_MASK ;trace_ram_load_postcopy_loop ((uint64_t )addr, flags); - place_needed = false;if (flags & (RAM_SAVE_FLAG_ZERO |RAM_SAVE_FLAG_PAGE |RAM_SAVE_FLAG_COMPRESS_PAGE )) { block =ram_block_from_stream (f, flags);
@@ -3204,9 +3203,7 @@ static int ram_load_postcopy(QEMUFile *f)*/ page_buffer = postcopy_host_page +host_page_offset_from_ram_block_offset (block, addr); -/* If all TP are zero then we can optimise the place */ if (target_pages ==1 ) { - all_zero = true; host_page =host_page_from_ram_block_offset (block, addr); }else if (host_page !=host_page_from_ram_block_offset (block, addr)) {
@@ -3223,7 +3220,6 @@ static int ram_load_postcopy(QEMUFile *f)*/ if (target_pages == (block->page_size /TARGET_PAGE_SIZE )) { place_needed = true; - target_pages =0 ; } place_source = postcopy_host_page; }
@@ -3300,6 +3296,10 @@ static int ram_load_postcopy(QEMUFile *f) ret =postcopy_place_page (mis, host_page, place_source, block); } + place_needed = false; + target_pages =0 ; +/* Assume we have a zero page until we detect something different */ + all_zero = true; } }
Signature · 1 line
2.25.1
Re: [PATCH v4 09/13] migration/ram: Consolidate variable reset after placement in ram_load_postcopy()
Quoted 6 lines · * David Hildenbrand ([email protected]) wrote:
Let's consolidate resetting the variables.
Cc "Dr. David Alan Gilbert" <[email protected]>Cc Juan Quintela <[email protected]>Cc Peter Xu <[email protected]>Signed-off-by David Hildenbrand <[email protected]>
Quoted 57 lines
--- migration/ram.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)migration/ram.c +5
-5@@ -3150,7 +3150,7 @@ static int ram_load_postcopy(QEMUFile *f)/* Temporary page that is later 'placed' */ void *postcopy_host_page = mis->postcopy_tmp_page;void *host_page =NULL ; -bool all_zero = false; +bool all_zero = true;int target_pages =0 ;while (!ret && !(flags &RAM_SAVE_FLAG_EOS )) {@@ -3176,7 +3176,6 @@ static int ram_load_postcopy(QEMUFile *f) addr &=TARGET_PAGE_MASK ;trace_ram_load_postcopy_loop ((uint64_t )addr, flags); - place_needed = false;if (flags & (RAM_SAVE_FLAG_ZERO |RAM_SAVE_FLAG_PAGE |RAM_SAVE_FLAG_COMPRESS_PAGE )) { block =ram_block_from_stream (f, flags);@@ -3204,9 +3203,7 @@ static int ram_load_postcopy(QEMUFile *f)*/ page_buffer = postcopy_host_page +host_page_offset_from_ram_block_offset (block, addr); -/* If all TP are zero then we can optimise the place */ if (target_pages ==1 ) { - all_zero = true; host_page =host_page_from_ram_block_offset (block, addr); }else if (host_page !=host_page_from_ram_block_offset (block, addr)) {@@ -3223,7 +3220,6 @@ static int ram_load_postcopy(QEMUFile *f)*/ if (target_pages == (block->page_size /TARGET_PAGE_SIZE )) { place_needed = true; - target_pages =0 ; } place_source = postcopy_host_page; }@@ -3300,6 +3296,10 @@ static int ram_load_postcopy(QEMUFile *f) ret =postcopy_place_page (mis, host_page, place_source, block); } + place_needed = false; + target_pages =0 ; +/* Assume we have a zero page until we detect something different */ + all_zero = true; } }Signature · 1 line
2.25.1
--
Dr. David Alan Gilbert / [email protected] / Manchester, UK
Dr. David Alan Gilbert
AppliedRe: [PATCH v4 09/13] migration/ram: Consolidate variable reset after placement in ram_load_postcopy()
Quoted 9 lines · * Dr. David Alan Gilbert ([email protected]) wrote:
Quoted 6 lines · * David Hildenbrand ([email protected]) wrote:
Let's consolidate resetting the variables.
Cc "Dr. David Alan Gilbert" <[email protected]>Cc Juan Quintela <[email protected]>Cc Peter Xu <[email protected]>Signed-off-by David Hildenbrand <[email protected]>Reviewed-by Dr. David Alan Gilbert <[email protected]>
Queued this one only; I had to do manual patch application due to some renaming in 91ba442; but I think it's still OK.
Quoted 54 lines
Quoted 54 lines
--- migration/ram.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)migration/ram.c +5
-5@@ -3150,7 +3150,7 @@ static int ram_load_postcopy(QEMUFile *f)/* Temporary page that is later 'placed' */ void *postcopy_host_page = mis->postcopy_tmp_page;void *host_page =NULL ; -bool all_zero = false; +bool all_zero = true;int target_pages =0 ;while (!ret && !(flags &RAM_SAVE_FLAG_EOS )) {@@ -3176,7 +3176,6 @@ static int ram_load_postcopy(QEMUFile *f) addr &=TARGET_PAGE_MASK ;trace_ram_load_postcopy_loop ((uint64_t )addr, flags); - place_needed = false;if (flags & (RAM_SAVE_FLAG_ZERO |RAM_SAVE_FLAG_PAGE |RAM_SAVE_FLAG_COMPRESS_PAGE )) { block =ram_block_from_stream (f, flags);@@ -3204,9 +3203,7 @@ static int ram_load_postcopy(QEMUFile *f)*/ page_buffer = postcopy_host_page +host_page_offset_from_ram_block_offset (block, addr); -/* If all TP are zero then we can optimise the place */ if (target_pages ==1 ) { - all_zero = true; host_page =host_page_from_ram_block_offset (block, addr); }else if (host_page !=host_page_from_ram_block_offset (block, addr)) {@@ -3223,7 +3220,6 @@ static int ram_load_postcopy(QEMUFile *f)*/ if (target_pages == (block->page_size /TARGET_PAGE_SIZE )) { place_needed = true; - target_pages =0 ; } place_source = postcopy_host_page; }@@ -3300,6 +3296,10 @@ static int ram_load_postcopy(QEMUFile *f) ret =postcopy_place_page (mis, host_page, place_source, block); } + place_needed = false; + target_pages =0 ; +/* Assume we have a zero page until we detect something different */ + all_zero = true; } }
Quoted 7 lines
Quoted 3 lines
Signature · 1 line
2.25.1--
Dr. David Alan Gilbert / [email protected] / Manchester, UK
--
Dr. David Alan Gilbert / [email protected] / Manchester, UK
Re: [PATCH v4 09/13] migration/ram: Consolidate variable reset after placement in ram_load_postcopy()
Quoted 9 lines · Dr. David Alan Gilbert
Quoted 8 lines · * Dr. David Alan Gilbert ([email protected]) wrote:
Quoted 6 lines · * David Hildenbrand ([email protected]) wrote:
Let's consolidate resetting the variables.
Cc "Dr. David Alan Gilbert" <[email protected]>Cc Juan Quintela <[email protected]>Cc Peter Xu <[email protected]>Signed-off-by David Hildenbrand <[email protected]>
Quoted 4 lines
Quoted 1 line
Reviewed-by Dr. David Alan Gilbert <[email protected]>Queued this one only; I had to do manual patch application due to some renaming in 91ba442; but I think it's still OK.
Thanks, how to best proceed with the other 12 patches in this series?
Signature · 3 lines
Thanks, David / dhildenb
Re: [PATCH v4 09/13] migration/ram: Consolidate variable reset after placement in ram_load_postcopy()
Quoted 10 lines · * David Hildenbrand ([email protected]) wrote:
Quoted 9 lines · Dr. David Alan Gilbert
Quoted 8 lines · * Dr. David Alan Gilbert ([email protected]) wrote:
Quoted 6 lines · * David Hildenbrand ([email protected]) wrote:
Let's consolidate resetting the variables.
Cc "Dr. David Alan Gilbert" <[email protected]>Cc Juan Quintela <[email protected]>Cc Peter Xu <[email protected]>Signed-off-by David Hildenbrand <[email protected]>
Quoted 6 lines
Quoted 4 lines
Quoted 1 line
Reviewed-by Dr. David Alan Gilbert <[email protected]>Queued this one only; I had to do manual patch application due to some renaming in 91ba442; but I think it's still OK.
Thanks, how to best proceed with the other 12 patches in this series?
Yeh I need to look at some of them; but they're buried in the other ~200 outstanding mails in my inbox.
Dave
Quoted 5 lines
Signature · 4 lines
-- Thanks, David / dhildenb
--
Dr. David Alan Gilbert / [email protected] / Manchester, UK
Re: [PATCH v4 09/13] migration/ram: Consolidate variable reset after placement in ram_load_postcopy()
Quoted 13 lines · Dr. David Alan Gilbert
Quoted 12 lines · * David Hildenbrand ([email protected]) wrote:
Quoted 11 lines · Dr. David Alan Gilbert
Quoted 9 lines · * Dr. David Alan Gilbert ([email protected]) wrote:
Quoted 6 lines · * David Hildenbrand ([email protected]) wrote:
Let's consolidate resetting the variables.
Cc "Dr. David Alan Gilbert" <[email protected]>Cc Juan Quintela <[email protected]>Cc Peter Xu <[email protected]>Signed-off-by David Hildenbrand <[email protected]>Reviewed-by Dr. David Alan Gilbert <[email protected]>
Quoted 8 lines
Quoted 4 lines
Quoted 2 lines
Queued this one only; I had to do manual patch application due to some renaming in 91ba442; but I think it's still OK.
Thanks, how to best proceed with the other 12 patches in this series?
Yeh I need to look at some of them; but they're buried in the other ~200 outstanding mails in my inbox.
Okay, let me know when you need a rebase/resend. Thanks!
Signature · 3 lines
Thanks, David / dhildenb
PATCH v4 10/13 migration/ram: Handle RAM block resizes during postcopy
In reply to David HildenbrandResizing while migrating is dangerous and does not work as expected. The whole migration code works on the usable_length of ram blocks and does not expect this to change at random points in time.
In the case of postcopy, relying on used_length is racy as soon as the guest is running. Also, when used_length changes we might leave the uffd handler registered for some memory regions, reject valid pages when migrating and fail when sending the recv bitmap to the source.
Resizing can be trigger *after* (but not during) a reset in ACPI code by the guest
- hw/arm/virt-acpi-build.c:acpi_ram_update()
- hw/i386/acpi-build.c:acpi_ram_update()
Let's remember the original used_length in a separate variable and use it in relevant postcopy code. Make sure to update it when we resize during precopy, when synchronizing the RAM block sizes with the source.
--- include/exec/ramblock.h | 10 ++++++++++ migration/postcopy-ram.c | 15 ++++++++++++--- migration/ram.c | 11 +++++++++-- 3 files changed, 31 insertions(+), 5 deletions(-)
include/exec/ramblock.h +10 -0
@@ -59,6 +59,16 @@ struct RAMBlock {*/ unsigned long *clear_bmap;uint8_t clear_bmap_shift; + +/* +* RAM block length that corresponds to the used_length on the migration +* source (after RAM block sizes were synchronized). Especially, after +* starting to run the guest, used_length and postcopy_length can differ. +* Used to register/unregister uffd handlers and as the size of the received +* bitmap. Receiving any page beyond this length will bail out, as it +* could not have been valid on the source. +*/ +ram_addr_t postcopy_length; };#endif #endif
migration/postcopy-ram.c +12 -3
@@ -17,6 +17,7 @@*/ #include "qemu/osdep.h" +#include "qemu/rcu.h" #include "exec/target_page.h" #include "migration.h" #include "qemu-file.h"
@@ -31,6 +32,7 @@#include "qemu/error-report.h" #include "trace.h" #include "hw/boards.h" +#include "exec/ramblock.h" /* Arbitrary limit on size of each discard command, * keeps them around ~200 bytes
@@ -456,6 +458,13 @@ static int init_range(RAMBlock *rb, void *opaque)ram_addr_t length =qemu_ram_get_used_length (rb);trace_postcopy_init_range (block_name, host_addr, offset, length); +/* +* Save the used_length before running the guest. In case we have to +* resize RAM blocks when syncing RAM block sizes from the source during +* precopy, we'll update it manually via the ram block notifier. +*/ + rb->postcopy_length = length; +/* * We need the whole of RAM to be truly empty for postcopy, so things * like ROMs and any data tables built during init must be zero'd
@@ -478,7 +487,7 @@ static int cleanup_range(RAMBlock *rb, void *opaque)const char *block_name =qemu_ram_get_idstr (rb);void *host_addr =qemu_ram_get_host_addr (rb);ram_addr_t offset =qemu_ram_get_offset (rb); -ram_addr_t length =qemu_ram_get_used_length (rb); +ram_addr_t length = rb->postcopy_length;MigrationIncomingState *mis = opaque;struct uffdio_range range_struct;trace_postcopy_cleanup_range (block_name, host_addr, offset, length);
@@ -600,7 +609,7 @@ static int nhp_range(RAMBlock *rb, void *opaque)const char *block_name =qemu_ram_get_idstr (rb);void *host_addr =qemu_ram_get_host_addr (rb);ram_addr_t offset =qemu_ram_get_offset (rb); -ram_addr_t length =qemu_ram_get_used_length (rb); +ram_addr_t length = rb->postcopy_length;trace_postcopy_nhp_range (block_name, host_addr, offset, length);/*
@@ -644,7 +653,7 @@ static int ram_block_enable_notify(RAMBlock *rb, void *opaque)struct uffdio_register reg_struct; reg_struct.range.start = (uintptr_t )qemu_ram_get_host_addr (rb); - reg_struct.range.len =qemu_ram_get_used_length (rb); + reg_struct.range.len = rb->postcopy_length; reg_struct.mode =UFFDIO_REGISTER_MODE_MISSING ;/* Now tell our userfault_fd that it's responsible for this area */
migration/ram.c +9 -2
@@ -244,7 +244,7 @@ int64_t ramblock_recv_bitmap_send(QEMUFile *file,return -1 ; } - nbits = block->used_length >>TARGET_PAGE_BITS ; + nbits = block->postcopy_length >>TARGET_PAGE_BITS ;/* * Make sure the tmp bitmap buffer is big enough, e.g., on 32bit
@@ -3184,7 +3184,13 @@ static int ram_load_postcopy(QEMUFile *f)break ; } -if (!offset_in_ramblock (block, addr)) { +/* +* Relying on used_length is racy and can result in false positives. +* We might place pages beyond used_length in case RAM was shrunk +* while in postcopy, which is fine - trying to place via +* UFFDIO_COPY/UFFDIO_ZEROPAGE will never segfault. +*/ +if (!block->host || addr >= block->postcopy_length) {error_report ("Illegal RAM offset " RAM_ADDR_FMT , addr); ret = -EINVAL ;break ;
@@ -3799,6 +3805,7 @@ static void ram_mig_ram_block_resized(RAMBlockNotifier *n, void *host, rb->idstr); } } + rb->postcopy_length = new_size;break ;case POSTCOPY_INCOMING_NONE :case POSTCOPY_INCOMING_RUNNING :
Signature · 1 line
2.25.1
PATCH v4 11/13 migration/multifd: Print used_length of memory block
In reply to David HildenbrandWe actually want to print the used_length, against which we check.
--- migration/multifd.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
migration/multifd.c +1 -1
@@ -356,7 +356,7 @@ static int multifd_recv_unfill_packet(MultiFDRecvParams *p, Error **errp)if (offset > (block->used_length -qemu_target_page_size ())) {error_setg (errp,"multifd: offset too long %" PRIu64" (max " RAM_ADDR_FMT ")" , - offset, block->max_length); + offset, block->used_length);return -1 ; } p->pages->iov[i].iov_base = block->host + offset;
Signature · 1 line
2.25.1
PATCH v4 12/13 migration/ram: Use offset_in_ramblock() in range checks
In reply to David HildenbrandWe never read or write beyond the used_length of memory blocks when migrating. Make this clearer by using offset_in_ramblock() consistently.
--- migration/ram.c | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)
migration/ram.c +5 -5
@@ -1318,8 +1318,8 @@ static bool find_dirty_block(RAMState *rs, PageSearchStatus *pss, bool *again) *again = false;return false; } -if ((((ram_addr_t )pss->page) <<TARGET_PAGE_BITS ) - >= pss->block->used_length) { +if (!offset_in_ramblock (pss->block, + ((ram_addr_t )pss->page) <<TARGET_PAGE_BITS )) {/* Didn't find anything in this RAM Block */ pss->page =0 ; pss->block =QLIST_NEXT_RCU (pss->block, next);
@@ -1523,7 +1523,7 @@ int ram_save_queue_pages(const char *rbname, ram_addr_t start, ram_addr_t len) rs->last_req_rb = ramblock; }trace_ram_save_queue_pages (ramblock->idstr, start, len); -if (start+len > ramblock->used_length) { +if (!offset_in_ramblock (ramblock, start + len -1 )) {error_report ("%s request overrun start=" RAM_ADDR_FMT " len=" RAM_ADDR_FMT " blocklen=" RAM_ADDR_FMT , __func__, start, len, ramblock->used_length);
@@ -3349,8 +3349,8 @@ static void colo_flush_ram_cache(void)while (block) { offset =migration_bitmap_find_dirty (ram_state, block, offset); -if (((ram_addr_t )offset) <<TARGET_PAGE_BITS - >= block->used_length) { +if (!offset_in_ramblock (block, + ((ram_addr_t )offset) <<TARGET_PAGE_BITS )) { offset =0 ; block =QLIST_NEXT_RCU (block, next); }else {
Signature · 1 line
2.25.1
PATCH v4 13/13 migration/ram: Tolerate partially changed mappings in postcopy code
In reply to David HildenbrandWhen we partially change mappings (esp., mmap over parts of an existing mmap like qemu_ram_remap() does) where we have a userfaultfd handler registered, the handler will implicitly be unregistered from the parts that changed.
Trying to place pages onto mappings where there is no longer a handler registered will fail. Let's make sure that any waiter is woken up - we have to do that manually.
Let's also document how UFFDIO_UNREGISTER will handle this scenario.
This is mainly a preparation for RAM blocks with resizable allcoations, where the mapping of the invalid RAM range will change. The source will keep sending pages that are outside of the new (shrunk) RAM size. We have to treat these pages like they would have been migrated, but can essentially simply drop the content (ignore the placement error).
Keep printing a warning when we hit EINVAL, to avoid hiding other (programming) issues. ENOENT is unique.
--- migration/postcopy-ram.c | 39 +++++++++++++++++++++++++++++++++++++++ 1 file changed, 39 insertions(+)
migration/postcopy-ram.c +39 -0
@@ -506,6 +506,14 @@ static int cleanup_range(RAMBlock *rb, void *opaque) range_struct.start = (uintptr_t )host_addr; range_struct.len = length; +/* +* In case the mapping was partially changed since we enabled userfault +* (e.g., via qemu_ram_remap()), the userfaultfd handler was already removed +* for the mappings that changed. Unregistering will, however, still work +* and ignore mappings without a registered handler. There could only be +* an issue if we would suddenly encounter a mapping that's incompatible +* with UFFD - which cannot happen within a single RAM block. +*/ if (ioctl (mis->userfault_fd,UFFDIO_UNREGISTER , &range_struct)) {error_report ("%s: userfault unregister %s" , __func__,strerror (errno));
@@ -1180,6 +1188,17 @@ int postcopy_ram_incoming_setup(MigrationIncomingState *mis)return 0 ; } +static int qemu_ufd_wake_ioctl (int userfault_fd,void *host_addr, +uint64_t pagesize) +{ +struct uffdio_range range = { + .start = (uint64_t )(uintptr_t )host_addr, + .len = pagesize, + }; + +return ioctl (userfault_fd,UFFDIO_WAKE , &range); +} +static int qemu_ufd_copy_ioctl (int userfault_fd,void *host_addr,void *from_addr,uint64_t pagesize,RAMBlock *rb) {
@@ -1198,6 +1217,26 @@ static int qemu_ufd_copy_ioctl(int userfault_fd, void *host_addr, zero_struct.mode =0 ; ret =ioctl (userfault_fd,UFFDIO_ZEROPAGE , &zero_struct); } + +/* +* When the mapping gets partially changed (e.g., qemu_ram_remap()) before +* we try to place a page, the userfaultfd handler will be removed for the +* changed mappings and placing pages will fail. We can safely ignore this, +* because mappings that changed on the destination don't need data from the +* source (e.g., qemu_ram_remap()). Wake up any waiter waiting for that page +* (unlikely but possible). Waking up waiters is always possible, even +* without a registered userfaultfd handler. +* +* Old kernels report EINVAL, new kernels report ENOENT in case there is +* no longer a userfaultfd handler for a mapping. +*/ +if (ret && (errno ==ENOENT || errno ==EINVAL )) { +if (errno ==EINVAL ) { +warn_report ("%s: Failed to place page %p. Waking up any waiters." , + __func__, host_addr); + } + ret =qemu_ufd_wake_ioctl (userfault_fd, host_addr, pagesize); + }if (!ret) {ramblock_recv_bitmap_set_range (rb, host_addr, pagesize /qemu_target_page_size ());
Signature · 1 line
2.25.1
Quoted 2 lines · David Hildenbrand
Basically a resend. Who's the lucky winner to pick this up for 5.1? :)
Gentle ping, I have loads of patches in my backlog, and it does not seem to get any shorter.
Quoted 92 lines
---
This is the follow up of
"[PATCH RFC] memory: Don't allow to resize RAM while migrating" [1]This series contains some (slightly modified) patches also contained in:
"[PATCH v2 fixed 00/16] Ram blocks with resizable anonymous allocations
under POSIX" [2]
That series will be based on this series. The last patch (#13) in this series could be moved to the other series, but I decided to include it in here for now (similar context).I realized that resizing RAM blocks while the guest is being migrated (precopy: resize while still running on the source, postcopy: resize
while already running on the target) is buggy. In case of precopy, we
can simply cancel migration. Postcopy handling is more involved. Resizing can currently happen during a guest reboot, triggered by ACPI rebuilds.Along with the fixes, some cleanups.
[1] https://lkml.kernel.org/r/[email protected]
[2] https://lkml.kernel.org/r/[email protected]v3 -> v4:
- Rebased and retested
- Added RBsv2 -> v3:
- Rebased on current master
- Added RBs
- "migration/ram: Tolerate partially changed mappings in postcopy code" -- Extended the comment for the uffdio unregister part.v1 -> v2:
- "util: vfio-helpers: Factor out and fix processing of existing ram blocks"
-- Stringify error
- "migraton/ram: Handle RAM block resizes during precopy"
-- Simplified check if we're migrating on the source
- "exec: Relax range check inram_block_discard_range()"
-- Added to make discard during resizes actually work
- "migration/ram: Discard new RAM when growing RAM blocks afterram_postcopy_incoming_init()"
-- Better checks if in the right postcopy mode.
-- Better patch subject/description/comments
- "migration/ram: Handle RAM block resizes during postcopy" -- Better comments
-- Adapt to changed postcopy checks
- "migrate/ram: Get rid of "place_source" inram_load_postcopy()" -- Dropped, as broken
- "migration/ram: Tolerate partially changed mappings in postcopy code" -- Better comment / description. Clarify that no implicit wakeup will happen
-- Warn on EINVAL (older kernels)
-- Wake up any waiter explicitlyDavid Hildenbrand (13):
util: vfio-helpers: Factor out and fix processing of existing ram
blocks
stubs/ram-block: Remove stubs that are no longer needed
numa: Teach ram block notifiers about resizeable ram blocks
numa: Make all callbacks of ram block notifiers optional migration/ram: Handle RAM block resizes during precopy
exec: Relax range check inram_block_discard_range()migration/ram: Discard RAM when growing RAM blocks after
ram_postcopy_incoming_init()
migration/ram: Simplify host page handling inram_load_postcopy()migration/ram: Consolidate variable reset after placement in
ram_load_postcopy()
migration/ram: Handle RAM block resizes during postcopy migration/multifd: Printused_lengthof memory block migration/ram: Useoffset_in_ramblock()in range checks migration/ram: Tolerate partially changed mappings in postcopy codeexec.c | 25 +++++-- hw/core/numa.c | 41 +++++++++-- hw/i386/xen/xen-mapcache.c | 7 +- include/exec/cpu-common.h | 1 + include/exec/memory.h | 10 +-- include/exec/ramblock.h | 10 +++ include/exec/ramlist.h | 13 ++-- migration/migration.c | 9 ++- migration/migration.h | 1 + migration/multifd.c | 2 +- migration/postcopy-ram.c | 54 +++++++++++++- migration/ram.c | 144 ++++++++++++++++++++++++++++--------- stubs/ram-block.c | 20 ------ target/i386/hax-mem.c | 5 +- target/i386/sev.c | 18 ++--- util/vfio-helpers.c | 41 ++++------- 16 files changed, 283 insertions(+), 118 deletions(-)
Signature · 3 lines
Thanks, David / dhildenb