Skip to contentSkip to conversation

s390x: Add base AP support

PATCH In review Janosch Frank 3 participants 17 messages Feb 2, 2024 – Feb 21, 2024

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

v4 cover s390x: Add base AP support

As KVM supports passing Adjunct Processor (AP) crypto devices to guests, we should make sure that the interface works as expected.

Three instructions provide the interface to the AP devices:
- nqap: Enqueues a crypto request
- dqap: Dequeues a crypto request
- pqap: Provides information and processes support functions

nqap & dqap work on crypto requests for which we currently don't want to add tests due to their sheer complexity.

Which leaves us with pqap which is partly emulated for a guest 2 and hence is a prime target for testing.

v4:
- Rebase on the cc dirty series
- Bumped year to 2024
v3:
- Renamed ap_check() to ap_setup() and added comment
v2:
- Re-worked the ap_check() function to test for stfle 12 since we rely on PQAP QCI in the library functions
- Re-worked APQN management
- Fixed faulty loop variable initializers in ap.c
- Fixed report messages
- Extended clobber lists
- Extended length bit checks for nqap
- Now using ARRAY_SIZE where applicabale
- NIB is now allocated as IO memory

Janosch Frank (7):
lib: s390x: Add ap library
s390x: Add guest 2 AP test
lib: s390x: ap: Add proper ap setup code
s390x: ap: Add pqap aqic tests
s390x: ap: Add reset tests
lib: s390x: ap: Add tapq test facility bit
s390x: ap: Add nq/dq len test

 lib/s390x/ap.c      | 286 ++++++++++++++++++++++
 lib/s390x/ap.h      | 119 ++++++++++
 s390x/Makefile      |   2 +
 s390x/ap.c          | 564 ++++++++++++++++++++++++++++++++++++++++++++
 s390x/unittests.cfg |   3 +
 5 files changed, 974 insertions(+)
 create mode 100644 lib/s390x/ap.c
 create mode 100644 lib/s390x/ap.h
 create mode 100644 s390x/ap.c
Signature · 1 line
2.40.1
#1 lore raw

PATCH v4 1/7 lib: s390x: Add ap library

Add functions and definitions needed to test the Adjunct Processor (AP) crypto interface.

---
 lib/s390x/ap.c | 97 ++++++++++++++++++++++++++++++++++++++++++++++++++
 lib/s390x/ap.h | 88 +++++++++++++++++++++++++++++++++++++++++++++
 s390x/Makefile |  1 +
 3 files changed, 186 insertions(+)
 create mode 100644 lib/s390x/ap.c
 create mode 100644 lib/s390x/ap.h
lib/s390x/ap.c new file +97 -0
new file mode 100644
index 00000000..9560ff64
@@ -0,0 +1,97 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * AP crypto functions
+ *
+ * Some parts taken from the Linux AP driver.
+ *
+ * Copyright IBM Corp. 2024
+ * Author: Janosch Frank <[email protected]>
+ *	   Tony Krowiak <[email protected]>
+ *	   Martin Schwidefsky <[email protected]>
+ *	   Harald Freudenberger <[email protected]>
+ */
+
+#include <libcflat.h>
+#include <interrupt.h>
+#include <ap.h>
+#include <asm/time.h>
+#include <asm/facility.h>
+
+int ap_pqap_tapq(uint8_t ap, uint8_t qn, struct ap_queue_status *apqsw,
+		 struct pqap_r2 *r2)
+{
+	struct pqap_r0 r0 = {
+		.ap = ap,
+		.qn = qn,
+		.fc = PQAP_TEST_APQ
+	};
+	uint64_t bogus_cc = 2;
+	int cc;
+
+	/*
+	 * Test AP Queue
+	 *
+	 * Writes AP configuration information to the memory pointed
+	 * at by GR2.
+	 *
+	 * Inputs: GR0
+	 * Outputs: GR1 (APQSW), GR2 (tapq data)
+	 * Synchronous
+	 */
+	asm volatile(
+		"       tmll	%[bogus_cc],3\n"
+		"	lgr	0,%[r0]\n"
+		"	.insn	rre,0xb2af0000,0,0\n" /* PQAP */
+		"	stg	1,%[apqsw]\n"
+		"	stg	2,%[r2]\n"
+		"	ipm	%[cc]\n"
+		"	srl	%[cc],28\n"
+		: [apqsw] "=&T" (*apqsw), [r2] "=&T" (*r2), [cc] "=&d" (cc)
+		: [r0] "d" (r0), [bogus_cc] "d" (bogus_cc));
+
+	return cc;
+}
+
+int ap_pqap_qci(struct ap_config_info *info)
+{
+	struct pqap_r0 r0 = { .fc = PQAP_QUERY_AP_CONF_INFO };
+	uint64_t bogus_cc = 2;
+	int cc;
+
+	/*
+	 * Query AP Configuration Information
+	 *
+	 * Writes AP configuration information to the memory pointed
+	 * at by GR2.
+	 *
+	 * Inputs: GR0, GR2 (QCI block address)
+	 * Outputs: memory at GR2 address
+	 * Synchronous
+	 */
+	asm volatile(
+		"       tmll	%[bogus_cc],3\n"
+		"	lgr	0,%[r0]\n"
+		"	lgr	2,%[info]\n"
+		"	.insn	rre,0xb2af0000,0,0\n" /* PQAP */
+		"	ipm	%[cc]\n"
+		"	srl	%[cc],28\n"
+		: [cc] "=&d" (cc)
+		: [r0] "d" (r0), [info] "d" (info), [bogus_cc] "d" (bogus_cc)
+		: "cc", "memory", "0", "2");
+
+	return cc;
+}
+
+/* Will later be extended to a proper setup function */
+bool ap_setup(void)
+{
+	/*
+	 * Base AP support has no STFLE or SCLP feature bit but the
+	 * PQAP QCI support is indicated via stfle bit 12. As this
+	 * library relies on QCI we bail out if it's not available.
+	 */
+	if (!test_facility(12))
+		return false;
+
+	return true;
+}
lib/s390x/ap.h new file +88 -0

88 lines not on this page · raw message

s390x/Makefile +1 -0
index 7fce9f9d..4f6c627d 100644
@@ -110,6 +110,7 @@ cflatobjs += lib/s390x/malloc_io.o
 cflatobjs += lib/s390x/uv.o
 cflatobjs += lib/s390x/sie.o
 cflatobjs += lib/s390x/fault.o
+cflatobjs += lib/s390x/ap.o
 
 OBJDIRS += lib/s390x
 
Signature · 1 line
2.40.1
#2 lore raw

Re: [kvm-unit-tests PATCH v4 1/7] lib: s390x: Add ap library

I made a few comments and suggestions. I am not very well-versed in the inline assembly code, so I'll leave that up to someone who is more knowledgeable. I copied @Harald since I believe it was him who wrote it.

Quoted 102 lines · Janosch Frank

Add functions and definitions needed to test the Adjunct Processor (AP) crypto interface.

---
  lib/s390x/ap.c | 97 ++++++++++++++++++++++++++++++++++++++++++++++++++
  lib/s390x/ap.h | 88 +++++++++++++++++++++++++++++++++++++++++++++
  s390x/Makefile |  1 +
  3 files changed, 186 insertions(+)

create mode 100644 lib/s390x/ap.c
create mode 100644 lib/s390x/ap.h

lib/s390x/ap.c new file +84 -0
new file mode 100644
index 00000000..9560ff64
@@ -0,0 +1,97 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * AP crypto functions
+ *
+ * Some parts taken from the Linux AP driver.
+ *
+ * Copyright IBM Corp. 2024
+ * Author: Janosch Frank <[email protected]>
+ *	   Tony Krowiak <[email protected]>
+ *	   Martin Schwidefsky <[email protected]>
+ *	   Harald Freudenberger <[email protected]>
+ */
+
+#include <libcflat.h>
+#include <interrupt.h>
+#include <ap.h>
+#include <asm/time.h>
+#include <asm/facility.h>
+
+int ap_pqap_tapq(uint8_t ap, uint8_t qn, struct ap_queue_status *apqsw,
+		 struct pqap_r2 *r2)
+{
+	struct pqap_r0 r0 = {
+		.ap = ap,
+		.qn = qn,
+		.fc = PQAP_TEST_APQ
+	};
+	uint64_t bogus_cc = 2;
+	int cc;
+
+	/*
+	 * Test AP Queue
+	 *
+	 * Writes AP configuration information to the memory pointed
+	 * at by GR2.
+	 *
+	 * Inputs: GR0
+	 * Outputs: GR1 (APQSW), GR2 (tapq data)
+	 * Synchronous
+	 */
+	asm volatile(
+		"       tmll	%[bogus_cc],3\n"
+		"	lgr	0,%[r0]\n"
+		"	.insn	rre,0xb2af0000,0,0\n" /* PQAP */
+		"	stg	1,%[apqsw]\n"
+		"	stg	2,%[r2]\n"
+		"	ipm	%[cc]\n"
+		"	srl	%[cc],28\n"
+		: [apqsw] "=&T" (*apqsw), [r2] "=&T" (*r2), [cc] "=&d" (cc)
+		: [r0] "d" (r0), [bogus_cc] "d" (bogus_cc));
+
+	return cc;
+}
+
+int ap_pqap_qci(struct ap_config_info *info)
+{
+	struct pqap_r0 r0 = { .fc = PQAP_QUERY_AP_CONF_INFO };
+	uint64_t bogus_cc = 2;
+	int cc;
+
+	/*
+	 * Query AP Configuration Information
+	 *
+	 * Writes AP configuration information to the memory pointed
+	 * at by GR2.
+	 *
+	 * Inputs: GR0, GR2 (QCI block address)
+	 * Outputs: memory at GR2 address
+	 * Synchronous
+	 */
+	asm volatile(
+		"       tmll	%[bogus_cc],3\n"
+		"	lgr	0,%[r0]\n"
+		"	lgr	2,%[info]\n"
+		"	.insn	rre,0xb2af0000,0,0\n" /* PQAP */
+		"	ipm	%[cc]\n"
+		"	srl	%[cc],28\n"
+		: [cc] "=&d" (cc)
+		: [r0] "d" (r0), [info] "d" (info), [bogus_cc] "d" (bogus_cc)
+		: "cc", "memory", "0", "2");
+
+	return cc;
+}
+

lib/s390x/ap.c line 94

Quoted 10 lines
lib/s390x/ap.c new file +10 -0
+/* Will later be extended to a proper setup function */
+bool ap_setup(void)
+{
+	/*
+	 * Base AP support has no STFLE or SCLP feature bit but the
+	 * PQAP QCI support is indicated via stfle bit 12. As this
+	 * library relies on QCI we bail out if it's not available.
+	 */
+	if (!test_facility(12))
+		return false;

The STFLE.12 can be turned off when starting the guest, so this may not be a valid test.

We use the ap_instructions_available function (in ap.h) which executes the TAPQ command to verify whether the AP instructions are installed or not. Maybe you can do something similar here:

static inline bool ap_instructions_available(void)

{
    unsigned long reg0 = 0x0000;
    unsigned long reg1 = 0;

    asm volatile(
        "    lgr    0,%[reg0]\n"        /* qid into gr0 */ "    lghi    1,0\n"            /* 0 into gr1 */ "    lghi    2,0\n"            /* 0 into gr2 */ "    .insn    rre,0xb2af0000,0,0\n"    /* PQAP(TAPQ) */ "0:    la    %[reg1],1\n"        /* 1 into reg1 */ "1:\n"
        EX_TABLE(0b, 1b)
        : [reg1] "+&d" (reg1)
        : [reg0] "d" (reg0)
        : "cc", "0", "1", "2");
    return reg1 != 0;
}

Quoted 23 lines
lib/s390x/ap.c new file +3 -0
+
+	return true;
+}
lib/s390x/ap.h new file +14 -0
new file mode 100644
index 00000000..b806513f
@@ -0,0 +1,88 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * AP definitions
+ *
+ * Some parts taken from the Linux AP driver.
+ *
+ * Copyright IBM Corp. 2024
+ * Author: Janosch Frank <[email protected]>
+ *	   Tony Krowiak <[email protected]>
+ *	   Martin Schwidefsky <[email protected]>
+ *	   Harald Freudenberger <[email protected]>
+ */
+
+#ifndef _S390X_AP_H_

lib/s390x/ap.h line 24

Quoted 10 lines
lib/s390x/ap.h new file +10 -0
+#define _S390X_AP_H_
+
+enum PQAP_FC {
+	PQAP_TEST_APQ,
+	PQAP_RESET_APQ,
+	PQAP_ZEROIZE_APQ,
+	PQAP_QUEUE_INT_CONTRL,
+	PQAP_QUERY_AP_CONF_INFO,
+	PQAP_QUERY_AP_COMP_TYPE,
+	PQAP_BEST_AP,

Maybe use abbreviations like your function names above?

PQAP_TAPQ,
PQAP_RAPQ,
PQAP_ZAPQ,
PQAP_AQIC,
PQAP_QCI,
PQAP_QACT,
PQAP_QBAP

lib/s390x/ap.h line 28

Quoted 4 lines
lib/s390x/ap.h new file +4 -0
+};
+
+struct ap_queue_status {
+	uint32_t pad0;			/* Ignored padding for zArch  */

Bit 0 is the E (queue empty) bit.

Quoted 24 lines
lib/s390x/ap.h new file +24 -0
+	uint32_t empty		: 1;
+	uint32_t replies_waiting: 1;
+	uint32_t full		: 1;
+	uint32_t pad1		: 4;
+	uint32_t irq_enabled	: 1;
+	uint32_t rc		: 8;
+	uint32_t pad2		: 16;
+} __attribute__((packed))  __attribute__((aligned(8)));
+_Static_assert(sizeof(struct ap_queue_status) == sizeof(uint64_t), "APQSW size");
+
+struct ap_config_info {
+	uint8_t apsc	 : 1;	/* S bit */
+	uint8_t apxa	 : 1;	/* N bit */
+	uint8_t qact	 : 1;	/* C bit */
+	uint8_t rc8a	 : 1;	/* R bit */
+	uint8_t l	 : 1;	/* L bit */
+	uint8_t lext	 : 3;	/* Lext bits */
+	uint8_t reserved2[3];
+	uint8_t Na;		/* max # of APs - 1 */
+	uint8_t Nd;		/* max # of Domains - 1 */
+	uint8_t reserved6[10];
+	uint32_t apm[8];	/* AP ID mask */
+	uint32_t aqm[8];	/* AP (usage) queue mask */
+	uint32_t adm[8];	/* AP (control) domain mask */

lib/s390x/ap.h line 62

Quoted 10 lines
lib/s390x/ap.h new file +10 -0
+	uint8_t _reserved4[16];
+} __attribute__((aligned(8))) __attribute__ ((__packed__));
+_Static_assert(sizeof(struct ap_config_info) == 128, "PQAP QCI size");
+
+struct pqap_r0 {
+	uint32_t pad0;
+	uint8_t fc;
+	uint8_t t : 1;		/* Test facilities (TAPQ)*/
+	uint8_t pad1 : 7;
+	uint8_t ap;

This is the APID part of an APQN, so how about renaming to 'apid'

lib/s390x/ap.h line 63

Quoted 1 line
lib/s390x/ap.h new file +1 -0
+	uint8_t qn;

This is the APQI  part of an APQN, so how about renaming to 'apqi'

lib/s390x/ap.h line 75

Quoted 12 lines
lib/s390x/ap.h new file +12 -0
+} __attribute__((packed))  __attribute__((aligned(8)));
+
+struct pqap_r2 {
+	uint8_t s : 1;		/* Special Command facility */
+	uint8_t m : 1;		/* AP4KM */
+	uint8_t c : 1;		/* AP4KC */
+	uint8_t cop : 1;	/* AP is in coprocessor mode */
+	uint8_t acc : 1;	/* AP is in accelerator mode */
+	uint8_t xcp : 1;	/* AP is in XCP-mode */
+	uint8_t n : 1;		/* AP extended addressing facility */
+	uint8_t pad_0 : 1;
+	uint8_t pad_1[3];

Is there a reason why the 'Classification'  field is left out?

Quoted 25 lines
lib/s390x/ap.h new file +13 -0
+	uint8_t at;
+	uint8_t nd;
+	uint8_t pad_6;
+	uint8_t pad_7 : 4;
+	uint8_t qd : 4;
+} __attribute__((packed))  __attribute__((aligned(8)));
+_Static_assert(sizeof(struct pqap_r2) == sizeof(uint64_t), "pqap_r2 size");
+
+bool ap_setup(void);
+int ap_pqap_tapq(uint8_t ap, uint8_t qn, struct ap_queue_status *apqsw,
+		 struct pqap_r2 *r2);
+int ap_pqap_qci(struct ap_config_info *info);
+#endif
s390x/Makefile +1 -0
index 7fce9f9d..4f6c627d 100644
@@ -110,6 +110,7 @@ cflatobjs += lib/s390x/malloc_io.o
  cflatobjs += lib/s390x/uv.o
  cflatobjs += lib/s390x/sie.o
  cflatobjs += lib/s390x/fault.o
+cflatobjs += lib/s390x/ap.o
 
  OBJDIRS += lib/s390x
 
#3 lore raw

Re: [kvm-unit-tests PATCH v4 1/7] lib: s390x: Add ap library

Quoted 136 lines · Anthony Krowiak

I made a few comments and suggestions. I am not very well-versed in the inline assembly code, so I'll leave that up to someone who is more knowledgeable. I copied @Harald since I believe it was him who wrote it.

Quoted 104 lines · Janosch Frank

Add functions and definitions needed to test the Adjunct Processor (AP) crypto interface.

---
  lib/s390x/ap.c | 97 
++++++++++++++++++++++++++++++++++++++++++++++++++
  lib/s390x/ap.h | 88 +++++++++++++++++++++++++++++++++++++++++++++
  s390x/Makefile |  1 +
  3 files changed, 186 insertions(+)

create mode 100644 lib/s390x/ap.c
create mode 100644 lib/s390x/ap.h

lib/s390x/ap.c new file +20 -0
new file mode 100644
index 00000000..9560ff64
@@ -0,0 +1,97 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * AP crypto functions
+ *
+ * Some parts taken from the Linux AP driver.
+ *
+ * Copyright IBM Corp. 2024
+ * Author: Janosch Frank <[email protected]>
+ *	   Tony Krowiak <[email protected]>
+ *	   Martin Schwidefsky <[email protected]>
+ *	   Harald Freudenberger <[email protected]>
+ */
+
+#include <libcflat.h>
+#include <interrupt.h>
+#include <ap.h>
+#include <asm/time.h>
+#include <asm/facility.h>
+
+int ap_pqap_tapq(uint8_t ap, uint8_t qn, struct ap_queue_status 

*apqsw,

lib/s390x/ap.c new file +64 -0
+		 struct pqap_r2 *r2)
+{
+	struct pqap_r0 r0 = {
+		.ap = ap,
+		.qn = qn,
+		.fc = PQAP_TEST_APQ
+	};
+	uint64_t bogus_cc = 2;
+	int cc;
+
+	/*
+	 * Test AP Queue
+	 *
+	 * Writes AP configuration information to the memory pointed
+	 * at by GR2.
+	 *
+	 * Inputs: GR0
+	 * Outputs: GR1 (APQSW), GR2 (tapq data)
+	 * Synchronous
+	 */
+	asm volatile(
+		"       tmll	%[bogus_cc],3\n"
+		"	lgr	0,%[r0]\n"
+		"	.insn	rre,0xb2af0000,0,0\n" /* PQAP */
+		"	stg	1,%[apqsw]\n"
+		"	stg	2,%[r2]\n"
+		"	ipm	%[cc]\n"
+		"	srl	%[cc],28\n"
+		: [apqsw] "=&T" (*apqsw), [r2] "=&T" (*r2), [cc] "=&d" (cc)
+		: [r0] "d" (r0), [bogus_cc] "d" (bogus_cc));
+
+	return cc;
+}
+
+int ap_pqap_qci(struct ap_config_info *info)
+{
+	struct pqap_r0 r0 = { .fc = PQAP_QUERY_AP_CONF_INFO };
+	uint64_t bogus_cc = 2;
+	int cc;
+
+	/*
+	 * Query AP Configuration Information
+	 *
+	 * Writes AP configuration information to the memory pointed
+	 * at by GR2.
+	 *
+	 * Inputs: GR0, GR2 (QCI block address)
+	 * Outputs: memory at GR2 address
+	 * Synchronous
+	 */
+	asm volatile(
+		"       tmll	%[bogus_cc],3\n"
+		"	lgr	0,%[r0]\n"
+		"	lgr	2,%[info]\n"
+		"	.insn	rre,0xb2af0000,0,0\n" /* PQAP */
+		"	ipm	%[cc]\n"
+		"	srl	%[cc],28\n"
+		: [cc] "=&d" (cc)
+		: [r0] "d" (r0), [info] "d" (info), [bogus_cc] "d" (bogus_cc)
+		: "cc", "memory", "0", "2");
+
+	return cc;
+}
+

lib/s390x/ap.c line 94

Quoted 10 lines
lib/s390x/ap.c new file +10 -0
+/* Will later be extended to a proper setup function */
+bool ap_setup(void)
+{
+	/*
+	 * Base AP support has no STFLE or SCLP feature bit but the
+	 * PQAP QCI support is indicated via stfle bit 12. As this
+	 * library relies on QCI we bail out if it's not available.
+	 */
+	if (!test_facility(12))
+		return false;

The STFLE.12 can be turned off when starting the guest, so this may not be a valid test.

We use the ap_instructions_available function (in ap.h) which executes the TAPQ command to verify whether the AP instructions are installed or not. Maybe you can do something similar here:

static inline bool ap_instructions_available(void)

{
    unsigned long reg0 = 0x0000;
    unsigned long reg1 = 0;

Quoted 13 lines

    asm volatile(
        "    lgr    0,%[reg0]\n"        /* qid into gr0 */ "    lghi    1,0\n"            /* 0 into gr1 */ "    lghi    2,0\n"            /* 0 into gr2 */ "    .insn    rre,0xb2af0000,0,0\n"    /* PQAP(TAPQ) */ "0:    la    %[reg1],1\n"        /* 1 into reg1 */ "1:\n"
        EX_TABLE(0b, 1b)
        : [reg1] "+&d" (reg1)
        : [reg0] "d" (reg0)
        : "cc", "0", "1", "2");
    return reg1 != 0;
}

Well, as Janos wrote - this lib functions rely on having QCI available. However, be carefully using the above function as it is setting up an exception table entry which is to catch the illegal instruction which will arise when no AP bus support is available.

Quoted 24 lines
Quoted 24 lines
lib/s390x/ap.c new file +3 -0
+
+	return true;
+}
lib/s390x/ap.h new file +15 -0
new file mode 100644
index 00000000..b806513f
@@ -0,0 +1,88 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * AP definitions
+ *
+ * Some parts taken from the Linux AP driver.
+ *
+ * Copyright IBM Corp. 2024
+ * Author: Janosch Frank <[email protected]>
+ *	   Tony Krowiak <[email protected]>
+ *	   Martin Schwidefsky <[email protected]>
+ *	   Harald Freudenberger <[email protected]>
+ */
+
+#ifndef _S390X_AP_H_
+#define _S390X_AP_H_
Quoted 8 lines

lib/s390x/ap.h line 23

Quoted 8 lines
lib/s390x/ap.h new file +8 -0
+
+enum PQAP_FC {
+	PQAP_TEST_APQ,
+	PQAP_RESET_APQ,
+	PQAP_ZEROIZE_APQ,
+	PQAP_QUEUE_INT_CONTRL,
+	PQAP_QUERY_AP_CONF_INFO,
+	PQAP_QUERY_AP_COMP_TYPE,

What is that ^^^^^^^^^^^^^ ?
The QACT ? But that's only one PQAP subfuntion.

Quoted 1 line

lib/s390x/ap.h line 24

Quoted 1 line
lib/s390x/ap.h new file +1 -0
+	PQAP_BEST_AP,

And this ^^^^^^^^^^^^ ? Never heard about.

Quoted 86 lines

Maybe use abbreviations like your function names above?

PQAP_TAPQ,
PQAP_RAPQ,
PQAP_ZAPQ,
PQAP_AQIC,
PQAP_QCI,
PQAP_QACT,
PQAP_QBAP

lib/s390x/ap.h line 28

Quoted 4 lines
lib/s390x/ap.h new file +4 -0
+};
+
+struct ap_queue_status {
+	uint32_t pad0;			/* Ignored padding for zArch  */

Bit 0 is the E (queue empty) bit.

Quoted 29 lines
lib/s390x/ap.h new file +9 -0
+	uint32_t empty		: 1;
+	uint32_t replies_waiting: 1;
+	uint32_t full		: 1;
+	uint32_t pad1		: 4;
+	uint32_t irq_enabled	: 1;
+	uint32_t rc		: 8;
+	uint32_t pad2		: 16;
+} __attribute__((packed))  __attribute__((aligned(8)));
+_Static_assert(sizeof(struct ap_queue_status) == sizeof(uint64_t), 

"APQSW size");

lib/s390x/ap.h new file +18 -0
+
+struct ap_config_info {
+	uint8_t apsc	 : 1;	/* S bit */
+	uint8_t apxa	 : 1;	/* N bit */
+	uint8_t qact	 : 1;	/* C bit */
+	uint8_t rc8a	 : 1;	/* R bit */
+	uint8_t l	 : 1;	/* L bit */
+	uint8_t lext	 : 3;	/* Lext bits */
+	uint8_t reserved2[3];
+	uint8_t Na;		/* max # of APs - 1 */
+	uint8_t Nd;		/* max # of Domains - 1 */
+	uint8_t reserved6[10];
+	uint32_t apm[8];	/* AP ID mask */
+	uint32_t aqm[8];	/* AP (usage) queue mask */
+	uint32_t adm[8];	/* AP (control) domain mask */
+	uint8_t _reserved4[16];
+} __attribute__((aligned(8))) __attribute__ ((__packed__));
+_Static_assert(sizeof(struct ap_config_info) == 128, "PQAP QCI 

size");

lib/s390x/ap.h line 62

Quoted 7 lines
lib/s390x/ap.h new file +7 -0
+
+struct pqap_r0 {
+	uint32_t pad0;
+	uint8_t fc;
+	uint8_t t : 1;		/* Test facilities (TAPQ)*/
+	uint8_t pad1 : 7;
+	uint8_t ap;

This is the APID part of an APQN, so how about renaming to 'apid'

lib/s390x/ap.h line 63

Quoted 1 line
lib/s390x/ap.h new file +1 -0
+	uint8_t qn;

This is the APQI  part of an APQN, so how about renaming to 'apqi'

lib/s390x/ap.h line 75

Quoted 12 lines
lib/s390x/ap.h new file +12 -0
+} __attribute__((packed))  __attribute__((aligned(8)));
+
+struct pqap_r2 {
+	uint8_t s : 1;		/* Special Command facility */
+	uint8_t m : 1;		/* AP4KM */
+	uint8_t c : 1;		/* AP4KC */
+	uint8_t cop : 1;	/* AP is in coprocessor mode */
+	uint8_t acc : 1;	/* AP is in accelerator mode */
+	uint8_t xcp : 1;	/* AP is in XCP-mode */
+	uint8_t n : 1;		/* AP extended addressing facility */
+	uint8_t pad_0 : 1;
+	uint8_t pad_1[3];

Is there a reason why the 'Classification'  field is left out?

Quoted 9 lines
Quoted 9 lines
lib/s390x/ap.h new file +7 -0
+	uint8_t at;
+	uint8_t nd;
+	uint8_t pad_6;
+	uint8_t pad_7 : 4;
+	uint8_t qd : 4;
+} __attribute__((packed))  __attribute__((aligned(8)));
+_Static_assert(sizeof(struct pqap_r2) == sizeof(uint64_t), "pqap_r2 

size");
+

Isn't this all going into the kernel? So consider using the arch/s390/include/asm/ap.h header file instead of re-defining the structs. Feel free to improve this file with reworked structs and field names if that's required.

Quoted 17 lines
Quoted 17 lines
lib/s390x/ap.h new file +2 -0
+bool ap_setup(void);
+int ap_pqap_tapq(uint8_t ap, uint8_t qn, struct ap_queue_status 

*apqsw,

lib/s390x/ap.h new file +3 -0
+		 struct pqap_r2 *r2);
+int ap_pqap_qci(struct ap_config_info *info);
+#endif
s390x/Makefile +1 -0
index 7fce9f9d..4f6c627d 100644
@@ -110,6 +110,7 @@ cflatobjs += lib/s390x/malloc_io.o
  cflatobjs += lib/s390x/uv.o
  cflatobjs += lib/s390x/sie.o
  cflatobjs += lib/s390x/fault.o
+cflatobjs += lib/s390x/ap.o
    OBJDIRS += lib/s390x
 
#4 lore raw

Re: [kvm-unit-tests PATCH v4 1/7] lib: s390x: Add ap library

Quoted 183 lines · Harald Freudenberger
Quoted 136 lines · Anthony Krowiak

I made a few comments and suggestions. I am not very well-versed in the inline assembly code, so I'll leave that up to someone who is more knowledgeable. I copied @Harald since I believe it was him who wrote it.

Quoted 104 lines · Janosch Frank

Add functions and definitions needed to test the Adjunct Processor (AP) crypto interface.

---
  lib/s390x/ap.c | 97
++++++++++++++++++++++++++++++++++++++++++++++++++
  lib/s390x/ap.h | 88 +++++++++++++++++++++++++++++++++++++++++++++ s390x/Makefile |  1 +

  3 files changed, 186 insertions(+)

  create mode 100644 lib/s390x/ap.c
  create mode 100644 lib/s390x/ap.h

lib/s390x/ap.c new file +20 -0
new file mode 100644
index 00000000..9560ff64
@@ -0,0 +1,97 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * AP crypto functions
+ *
+ * Some parts taken from the Linux AP driver.
+ *
+ * Copyright IBM Corp. 2024
+ * Author: Janosch Frank <[email protected]>
+ *       Tony Krowiak <[email protected]>
+ *       Martin Schwidefsky <[email protected]>
+ *       Harald Freudenberger <[email protected]>
+ */
+
+#include <libcflat.h>
+#include <interrupt.h>
+#include <ap.h>
+#include <asm/time.h>
+#include <asm/facility.h>
+
+int ap_pqap_tapq(uint8_t ap, uint8_t qn, struct ap_queue_status 

*apqsw,
+         struct pqap_r2 *r2)

lib/s390x/ap.c new file +63 -0
+{
+    struct pqap_r0 r0 = {
+        .ap = ap,
+        .qn = qn,
+        .fc = PQAP_TEST_APQ
+    };
+    uint64_t bogus_cc = 2;
+    int cc;
+
+    /*
+     * Test AP Queue
+     *
+     * Writes AP configuration information to the memory pointed
+     * at by GR2.
+     *
+     * Inputs: GR0
+     * Outputs: GR1 (APQSW), GR2 (tapq data)
+     * Synchronous
+     */
+    asm volatile(
+        "       tmll    %[bogus_cc],3\n"
+        "    lgr    0,%[r0]\n"
+        "    .insn    rre,0xb2af0000,0,0\n" /* PQAP */
+        "    stg    1,%[apqsw]\n"
+        "    stg    2,%[r2]\n"
+        "    ipm    %[cc]\n"
+        "    srl    %[cc],28\n"
+        : [apqsw] "=&T" (*apqsw), [r2] "=&T" (*r2), [cc] "=&d" (cc)
+        : [r0] "d" (r0), [bogus_cc] "d" (bogus_cc));
+
+    return cc;
+}
+
+int ap_pqap_qci(struct ap_config_info *info)
+{
+    struct pqap_r0 r0 = { .fc = PQAP_QUERY_AP_CONF_INFO };
+    uint64_t bogus_cc = 2;
+    int cc;
+
+    /*
+     * Query AP Configuration Information
+     *
+     * Writes AP configuration information to the memory pointed
+     * at by GR2.
+     *
+     * Inputs: GR0, GR2 (QCI block address)
+     * Outputs: memory at GR2 address
+     * Synchronous
+     */
+    asm volatile(
+        "       tmll    %[bogus_cc],3\n"
+        "    lgr    0,%[r0]\n"
+        "    lgr    2,%[info]\n"
+        "    .insn    rre,0xb2af0000,0,0\n" /* PQAP */
+        "    ipm    %[cc]\n"
+        "    srl    %[cc],28\n"
+        : [cc] "=&d" (cc)
+        : [r0] "d" (r0), [info] "d" (info), [bogus_cc] "d" (bogus_cc)
+        : "cc", "memory", "0", "2");
+
+    return cc;
+}
+

lib/s390x/ap.c line 94

Quoted 10 lines
lib/s390x/ap.c new file +10 -0
+/* Will later be extended to a proper setup function */
+bool ap_setup(void)
+{
+    /*
+     * Base AP support has no STFLE or SCLP feature bit but the
+     * PQAP QCI support is indicated via stfle bit 12. As this
+     * library relies on QCI we bail out if it's not available.
+     */
+    if (!test_facility(12))
+        return false;

The STFLE.12 can be turned off when starting the guest, so this may not be a valid test.

We use the ap_instructions_available function (in ap.h) which executes the TAPQ command to verify whether the AP instructions are installed or not. Maybe you can do something similar here:

static inline bool ap_instructions_available(void)

{
    unsigned long reg0 = 0x0000;
    unsigned long reg1 = 0;

Quoted 13 lines

    asm volatile(
        "    lgr    0,%[reg0]\n"        /* qid into gr0 */ "    lghi    1,0\n"            /* 0 into gr1 */ "    lghi    2,0\n"            /* 0 into gr2 */ "    .insn    rre,0xb2af0000,0,0\n"    /* PQAP(TAPQ) */ "0:    la    %[reg1],1\n"        /* 1 into reg1 */ "1:\n"
        EX_TABLE(0b, 1b)
        : [reg1] "+&d" (reg1)
        : [reg0] "d" (reg0)
        : "cc", "0", "1", "2");
    return reg1 != 0;
}

Well, as Janos wrote - this lib functions rely on having QCI available. However, be carefully using the above function as it is setting up an exception table entry which is to catch the illegal instruction which will arise when no AP bus support is available.

Quoted 27 lines
Quoted 27 lines
lib/s390x/ap.c new file +3 -0
+
+    return true;
+}
lib/s390x/ap.h new file +18 -0
new file mode 100644
index 00000000..b806513f
@@ -0,0 +1,88 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * AP definitions
+ *
+ * Some parts taken from the Linux AP driver.
+ *
+ * Copyright IBM Corp. 2024
+ * Author: Janosch Frank <[email protected]>
+ *       Tony Krowiak <[email protected]>
+ *       Martin Schwidefsky <[email protected]>
+ *       Harald Freudenberger <[email protected]>
+ */
+
+#ifndef _S390X_AP_H_
+#define _S390X_AP_H_
+
+enum PQAP_FC {
+    PQAP_TEST_APQ,
Quoted 8 lines
Quoted 5 lines

lib/s390x/ap.h line 23

Quoted 5 lines
lib/s390x/ap.h new file +5 -0
+    PQAP_RESET_APQ,
+    PQAP_ZEROIZE_APQ,
+    PQAP_QUEUE_INT_CONTRL,
+    PQAP_QUERY_AP_CONF_INFO,
+    PQAP_QUERY_AP_COMP_TYPE,

What is that       ^^^^^^^^^^^^^ ?
The QACT ? But that's only one PQAP subfuntion.

PQAP(QBAP)?

Quoted 123 lines
Quoted 2 lines

lib/s390x/ap.h line 24

Quoted 2 lines
lib/s390x/ap.h new file +1 -0
+    PQAP_BEST_AP,

And this ^^^^^^^^^^^^ ? Never heard about.

Quoted 85 lines

Maybe use abbreviations like your function names above?

    PQAP_TAPQ,
    PQAP_RAPQ,
    PQAP_ZAPQ,
    PQAP_AQIC,
    PQAP_QCI,
    PQAP_QACT,
    PQAP_QBAP

lib/s390x/ap.h line 28

Quoted 4 lines
lib/s390x/ap.h new file +4 -0
+};
+
+struct ap_queue_status {
+    uint32_t pad0;            /* Ignored padding for zArch */

Bit 0 is the E (queue empty) bit.

Quoted 25 lines
lib/s390x/ap.h new file +9 -0
+    uint32_t empty        : 1;
+    uint32_t replies_waiting: 1;
+    uint32_t full        : 1;
+    uint32_t pad1        : 4;
+    uint32_t irq_enabled    : 1;
+    uint32_t rc        : 8;
+    uint32_t pad2        : 16;
+} __attribute__((packed))  __attribute__((aligned(8)));
+_Static_assert(sizeof(struct ap_queue_status) == sizeof(uint64_t), 

"APQSW size");

lib/s390x/ap.h new file +15 -0
+
+struct ap_config_info {
+    uint8_t apsc     : 1;    /* S bit */
+    uint8_t apxa     : 1;    /* N bit */
+    uint8_t qact     : 1;    /* C bit */
+    uint8_t rc8a     : 1;    /* R bit */
+    uint8_t l     : 1;    /* L bit */
+    uint8_t lext     : 3;    /* Lext bits */
+    uint8_t reserved2[3];
+    uint8_t Na;        /* max # of APs - 1 */
+    uint8_t Nd;        /* max # of Domains - 1 */
+    uint8_t reserved6[10];
+    uint32_t apm[8];    /* AP ID mask */
+    uint32_t aqm[8];    /* AP (usage) queue mask */
+    uint32_t adm[8];    /* AP (control) domain mask */

lib/s390x/ap.h line 62

Quoted 10 lines
lib/s390x/ap.h new file +10 -0
+    uint8_t _reserved4[16];
+} __attribute__((aligned(8))) __attribute__ ((__packed__));
+_Static_assert(sizeof(struct ap_config_info) == 128, "PQAP QCI size");
+
+struct pqap_r0 {
+    uint32_t pad0;
+    uint8_t fc;
+    uint8_t t : 1;        /* Test facilities (TAPQ)*/
+    uint8_t pad1 : 7;
+    uint8_t ap;

This is the APID part of an APQN, so how about renaming to 'apid'

Quoted 1 line

+    uint8_t qn;

This is the APQI  part of an APQN, so how about renaming to 'apqi'

lib/s390x/ap.h line 75

Quoted 12 lines
lib/s390x/ap.h new file +12 -0
+} __attribute__((packed)) __attribute__((aligned(8)));
+
+struct pqap_r2 {
+    uint8_t s : 1;        /* Special Command facility */
+    uint8_t m : 1;        /* AP4KM */
+    uint8_t c : 1;        /* AP4KC */
+    uint8_t cop : 1;    /* AP is in coprocessor mode */
+    uint8_t acc : 1;    /* AP is in accelerator mode */
+    uint8_t xcp : 1;    /* AP is in XCP-mode */
+    uint8_t n : 1;        /* AP extended addressing facility */
+    uint8_t pad_0 : 1;
+    uint8_t pad_1[3];

Is there a reason why the 'Classification'  field is left out?

Quoted 9 lines
Quoted 9 lines

+    uint8_t at;
+    uint8_t nd;
+    uint8_t pad_6;
+    uint8_t pad_7 : 4;
+    uint8_t qd : 4;

lib/s390x/ap.h new file +2 -0
+} __attribute__((packed))  __attribute__((aligned(8)));
+_Static_assert(sizeof(struct pqap_r2) == sizeof(uint64_t), "pqap_r2 

size");
+

Isn't this all going into the kernel? So consider using the arch/s390/include/asm/ap.h header file instead of re-defining the structs. Feel free to improve this file with reworked structs and field names if that's required.

Quoted 17 lines
Quoted 17 lines
lib/s390x/ap.h new file +2 -0
+bool ap_setup(void);
+int ap_pqap_tapq(uint8_t ap, uint8_t qn, struct ap_queue_status 

*apqsw,
+         struct pqap_r2 *r2);

lib/s390x/ap.h new file +2 -0
+int ap_pqap_qci(struct ap_config_info *info);
+#endif
s390x/Makefile +0 -0
index 7fce9f9d..4f6c627d 100644
@@ -110,6 +110,7 @@ cflatobjs += lib/s390x/malloc_io.o

  cflatobjs += lib/s390x/uv.o
  cflatobjs += lib/s390x/sie.o
  cflatobjs += lib/s390x/fault.o
+cflatobjs += lib/s390x/ap.o
    OBJDIRS += lib/s390x

#5 lore raw

Re: [kvm-unit-tests PATCH v4 1/7] lib: s390x: Add ap library

In reply to Anthony Krowiak
Quoted 9 lines · Anthony Krowiak

I made a few comments and suggestions. I am not very well-versed in the inline assembly code, so I'll leave that up to someone who is more knowledgeable. I copied @Harald since I believe it was him who wrote it.

Quoted 4 lines · Janosch Frank

Add functions and definitions needed to test the Adjunct Processor (AP) crypto interface.

[...]

Quoted 15 lines

lib/s390x/ap.c line 94

Quoted 10 lines
lib/s390x/ap.c new file +10 -0
+/* Will later be extended to a proper setup function */
+bool ap_setup(void)
+{
+	/*
+	 * Base AP support has no STFLE or SCLP feature bit but the
+	 * PQAP QCI support is indicated via stfle bit 12. As this
+	 * library relies on QCI we bail out if it's not available.
+	 */
+	if (!test_facility(12))
+		return false;

The STFLE.12 can be turned off when starting the guest, so this may not be a valid test.

Quoted 3 lines

We use the ap_instructions_available function (in ap.h) which executes the TAPQ command to verify whether the AP instructions are installed or not. Maybe you can do something similar here:

This library relies on QCI, hence we only check for stfle. I see no sense in manually probing the whole APQN space.

If stfle 12 is indicated I'd expect AP instructions to not generate exceptions or do they in a sane CPU model?

Quoted 37 lines
Quoted 23 lines
lib/s390x/ap.c new file +3 -0
+
+	return true;
+}
lib/s390x/ap.h new file +14 -0
new file mode 100644
index 00000000..b806513f
@@ -0,0 +1,88 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * AP definitions
+ *
+ * Some parts taken from the Linux AP driver.
+ *
+ * Copyright IBM Corp. 2024
+ * Author: Janosch Frank <[email protected]>
+ *	   Tony Krowiak <[email protected]>
+ *	   Martin Schwidefsky <[email protected]>
+ *	   Harald Freudenberger <[email protected]>
+ */
+
+#ifndef _S390X_AP_H_

lib/s390x/ap.h line 24

Quoted 10 lines
lib/s390x/ap.h new file +10 -0
+#define _S390X_AP_H_
+
+enum PQAP_FC {
+	PQAP_TEST_APQ,
+	PQAP_RESET_APQ,
+	PQAP_ZEROIZE_APQ,
+	PQAP_QUEUE_INT_CONTRL,
+	PQAP_QUERY_AP_CONF_INFO,
+	PQAP_QUERY_AP_COMP_TYPE,
+	PQAP_BEST_AP,

Maybe use abbreviations like your function names above?

Quoted 8 lines

PQAP_TAPQ,
PQAP_RAPQ,
PQAP_ZAPQ,
PQAP_AQIC,
PQAP_QCI,
PQAP_QACT,
PQAP_QBAP

Hmmmmmmm(TM)
My guess is that I tried making these constants readable without consulting architecture documents. But another option is using the constants that you suggested and adding comments with a long version.

Will do

[...]

Quoted 11 lines

lib/s390x/ap.h line 62

Quoted 6 lines
lib/s390x/ap.h new file +6 -0
+struct pqap_r0 {
+	uint32_t pad0;
+	uint8_t fc;
+	uint8_t t : 1;		/* Test facilities (TAPQ)*/
+	uint8_t pad1 : 7;
+	uint8_t ap;

This is the APID part of an APQN, so how about renaming to 'apid'

Quoted 4 lines

lib/s390x/ap.h line 63

Quoted 1 line
lib/s390x/ap.h new file +1 -0
+	uint8_t qn;

This is the APQI  part of an APQN, so how about renaming to 'apqi'

Hmm Linux uses qid
I'll change it to the Linux naming convention, might take me a while though

Quoted 18 lines
Quoted 4 lines
lib/s390x/ap.h new file +2 -0
+} __attribute__((packed))  __attribute__((aligned(8)));
+

lib/s390x/ap.h line 75

Quoted 10 lines
lib/s390x/ap.h new file +10 -0
+struct pqap_r2 {
+	uint8_t s : 1;		/* Special Command facility */
+	uint8_t m : 1;		/* AP4KM */
+	uint8_t c : 1;		/* AP4KC */
+	uint8_t cop : 1;	/* AP is in coprocessor mode */
+	uint8_t acc : 1;	/* AP is in accelerator mode */
+	uint8_t xcp : 1;	/* AP is in XCP-mode */
+	uint8_t n : 1;		/* AP extended addressing facility */
+	uint8_t pad_0 : 1;
+	uint8_t pad_1[3];

Is there a reason why the 'Classification'  field is left out?

It's not used in this library and therefore I chose to not name it to make structs a bit more readable.

Quoted 26 lines
Quoted 26 lines
lib/s390x/ap.h new file +13 -0
+	uint8_t at;
+	uint8_t nd;
+	uint8_t pad_6;
+	uint8_t pad_7 : 4;
+	uint8_t qd : 4;
+} __attribute__((packed))  __attribute__((aligned(8)));
+_Static_assert(sizeof(struct pqap_r2) == sizeof(uint64_t), "pqap_r2 size");
+
+bool ap_setup(void);
+int ap_pqap_tapq(uint8_t ap, uint8_t qn, struct ap_queue_status *apqsw,
+		 struct pqap_r2 *r2);
+int ap_pqap_qci(struct ap_config_info *info);
+#endif
s390x/Makefile +1 -0
index 7fce9f9d..4f6c627d 100644
@@ -110,6 +110,7 @@ cflatobjs += lib/s390x/malloc_io.o
   cflatobjs += lib/s390x/uv.o
   cflatobjs += lib/s390x/sie.o
   cflatobjs += lib/s390x/fault.o
+cflatobjs += lib/s390x/ap.o
 
   OBJDIRS += lib/s390x
 
#6 lore raw

Re: [kvm-unit-tests PATCH v4 1/7] lib: s390x: Add ap library

Quoted 28 lines · Janosch Frank
Quoted 9 lines · Anthony Krowiak

I made a few comments and suggestions. I am not very well-versed in the inline assembly code, so I'll leave that up to someone who is more knowledgeable. I copied @Harald since I believe it was him who wrote it.

Quoted 4 lines · Janosch Frank

Add functions and definitions needed to test the Adjunct Processor (AP) crypto interface.

[...]

Quoted 15 lines

lib/s390x/ap.c line 94

Quoted 10 lines
lib/s390x/ap.c new file +10 -0
+/* Will later be extended to a proper setup function */
+bool ap_setup(void)
+{
+    /*
+     * Base AP support has no STFLE or SCLP feature bit but the
+     * PQAP QCI support is indicated via stfle bit 12. As this
+     * library relies on QCI we bail out if it's not available.
+     */
+    if (!test_facility(12))
+        return false;

The STFLE.12 can be turned off when starting the guest, so this may not be a valid test.

Quoted 6 lines
Quoted 3 lines

We use the ap_instructions_available function (in ap.h) which executes the TAPQ command to verify whether the AP instructions are installed or not. Maybe you can do something similar here:

This library relies on QCI, hence we only check for stfle. I see no sense in manually probing the whole APQN space.

Makes sense. I was thrown off by the PQAP_FC enumeration which includes all of the AP function codes.

Quoted 3 lines

If stfle 12 is indicated I'd expect AP instructions to not generate exceptions or do they in a sane CPU model?

No, I would not expect PQAP(QCI) to generate an exception if STFLE 12 is indicated.

Quoted 48 lines
Quoted 39 lines
Quoted 25 lines
lib/s390x/ap.c new file +3 -0
+
+    return true;
+}
lib/s390x/ap.h new file +14 -0
new file mode 100644
index 00000000..b806513f
@@ -0,0 +1,88 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * AP definitions
+ *
+ * Some parts taken from the Linux AP driver.
+ *
+ * Copyright IBM Corp. 2024
+ * Author: Janosch Frank <[email protected]>
+ *       Tony Krowiak <[email protected]>
+ *       Martin Schwidefsky <[email protected]>
+ *       Harald Freudenberger <[email protected]>
+ */
+
+#ifndef _S390X_AP_H_

lib/s390x/ap.h line 24

Quoted 10 lines
lib/s390x/ap.h new file +10 -0
+#define _S390X_AP_H_
+
+enum PQAP_FC {
+    PQAP_TEST_APQ,
+    PQAP_RESET_APQ,
+    PQAP_ZEROIZE_APQ,
+    PQAP_QUEUE_INT_CONTRL,
+    PQAP_QUERY_AP_CONF_INFO,
+    PQAP_QUERY_AP_COMP_TYPE,
+    PQAP_BEST_AP,

Maybe use abbreviations like your function names above?

Quoted 8 lines

    PQAP_TAPQ,
    PQAP_RAPQ,
    PQAP_ZAPQ,
    PQAP_AQIC,
    PQAP_QCI,
    PQAP_QACT,
    PQAP_QBAP

Quoted 2 lines

Hmmmmmmm(TM)
My guess is that I tried making these constants readable without consulting architecture documents. But another option is using the constants that you suggested and adding comments with a long version.

I think that works out better; you won't have to abbreviate the longer version which will make it easier to understand.

Quoted 16 lines

Will do

[...]

Quoted 11 lines

lib/s390x/ap.h line 62

Quoted 6 lines
lib/s390x/ap.h new file +6 -0
+struct pqap_r0 {
+    uint32_t pad0;
+    uint8_t fc;
+    uint8_t t : 1;        /* Test facilities (TAPQ)*/
+    uint8_t pad1 : 7;
+    uint8_t ap;

This is the APID part of an APQN, so how about renaming to 'apid'

Quoted 7 lines
Quoted 4 lines

lib/s390x/ap.h line 63

Quoted 1 line
lib/s390x/ap.h new file +1 -0
+    uint8_t qn;

This is the APQI  part of an APQN, so how about renaming to 'apqi'

Hmm Linux uses qid
I'll change it to the Linux naming convention, might take me a while though

Well, the AP bus uses qid, but the vfio_ap module and the architecture doc uses APQN. In any case, it's a nit and I'm not terribly concerned about it.

Quoted 20 lines
Quoted 19 lines
Quoted 5 lines
lib/s390x/ap.h new file +2 -0
+} __attribute__((packed)) __attribute__((aligned(8)));
+

lib/s390x/ap.h line 75

Quoted 10 lines
lib/s390x/ap.h new file +10 -0
+struct pqap_r2 {
+    uint8_t s : 1;        /* Special Command facility */
+    uint8_t m : 1;        /* AP4KM */
+    uint8_t c : 1;        /* AP4KC */
+    uint8_t cop : 1;    /* AP is in coprocessor mode */
+    uint8_t acc : 1;    /* AP is in accelerator mode */
+    uint8_t xcp : 1;    /* AP is in XCP-mode */
+    uint8_t n : 1;        /* AP extended addressing facility */
+    uint8_t pad_0 : 1;
+    uint8_t pad_1[3];

Is there a reason why the 'Classification'  field is left out?

Quoted 1 line

It's not used in this library and therefore I chose to not name it to make structs a bit more readable.

Okay, not a problem.

Quoted 28 lines
Quoted 27 lines
Quoted 27 lines
lib/s390x/ap.h new file +7 -0
+    uint8_t at;
+    uint8_t nd;
+    uint8_t pad_6;
+    uint8_t pad_7 : 4;
+    uint8_t qd : 4;
+} __attribute__((packed))  __attribute__((aligned(8)));
+_Static_assert(sizeof(struct pqap_r2) == sizeof(uint64_t), "pqap_r2 

size");

lib/s390x/ap.h new file +3 -0
+
+bool ap_setup(void);
+int ap_pqap_tapq(uint8_t ap, uint8_t qn, struct ap_queue_status 

*apqsw,
+         struct pqap_r2 *r2);

lib/s390x/ap.h new file +2 -0
+int ap_pqap_qci(struct ap_config_info *info);
+#endif
s390x/Makefile +0 -0
index 7fce9f9d..4f6c627d 100644
@@ -110,6 +110,7 @@ cflatobjs += lib/s390x/malloc_io.o

   cflatobjs += lib/s390x/uv.o
   cflatobjs += lib/s390x/sie.o
   cflatobjs += lib/s390x/fault.o
+cflatobjs += lib/s390x/ap.o
      OBJDIRS += lib/s390x

#7 lore raw

Re: [kvm-unit-tests PATCH v4 1/7] lib: s390x: Add ap library

Quoted 43 lines · Anthony Krowiak
Quoted 28 lines · Janosch Frank
Quoted 9 lines · Anthony Krowiak

I made a few comments and suggestions. I am not very well-versed in the inline assembly code, so I'll leave that up to someone who is more knowledgeable. I copied @Harald since I believe it was him who wrote it.

Quoted 4 lines · Janosch Frank

Add functions and definitions needed to test the Adjunct Processor (AP) crypto interface.

[...]

Quoted 15 lines

lib/s390x/ap.c line 94

Quoted 10 lines
lib/s390x/ap.c new file +10 -0
+/* Will later be extended to a proper setup function */
+bool ap_setup(void)
+{
+    /*
+     * Base AP support has no STFLE or SCLP feature bit but the
+     * PQAP QCI support is indicated via stfle bit 12. As this
+     * library relies on QCI we bail out if it's not available.
+     */
+    if (!test_facility(12))
+        return false;

The STFLE.12 can be turned off when starting the guest, so this may not be a valid test.

Quoted 6 lines
Quoted 3 lines

We use the ap_instructions_available function (in ap.h) which executes the TAPQ command to verify whether the AP instructions are installed or not. Maybe you can do something similar here:

This library relies on QCI, hence we only check for stfle. I see no sense in manually probing the whole APQN space.

Makes sense. I was thrown off by the PQAP_FC enumeration which includes all of the AP function codes.

Quoted 2 lines
Quoted 6 lines
Quoted 1 line

If stfle 12 is indicated I'd expect AP instructions to not generate exceptions or do they in a sane CPU model?

No, I would not expect PQAP(QCI) to generate an exception if STFLE 12 is indicated.

Hm, I am not sure if you can rely just on checking stfle bit 12 and if that's available assume you have AP instructions. I never tried this. But as far as I know the KVM guys there is a chance that you see a stfle bit 12 but get an illegal instruction exception the moment you call an AP instruction... Maybe check this before relying on such a thing.

Quoted 140 lines
Quoted 48 lines
Quoted 39 lines
Quoted 25 lines
lib/s390x/ap.c new file +3 -0
+
+    return true;
+}
lib/s390x/ap.h new file +14 -0
new file mode 100644
index 00000000..b806513f
@@ -0,0 +1,88 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * AP definitions
+ *
+ * Some parts taken from the Linux AP driver.
+ *
+ * Copyright IBM Corp. 2024
+ * Author: Janosch Frank <[email protected]>
+ *       Tony Krowiak <[email protected]>
+ *       Martin Schwidefsky <[email protected]>
+ *       Harald Freudenberger <[email protected]>
+ */
+
+#ifndef _S390X_AP_H_

lib/s390x/ap.h line 24

Quoted 10 lines
lib/s390x/ap.h new file +10 -0
+#define _S390X_AP_H_
+
+enum PQAP_FC {
+    PQAP_TEST_APQ,
+    PQAP_RESET_APQ,
+    PQAP_ZEROIZE_APQ,
+    PQAP_QUEUE_INT_CONTRL,
+    PQAP_QUERY_AP_CONF_INFO,
+    PQAP_QUERY_AP_COMP_TYPE,
+    PQAP_BEST_AP,

Maybe use abbreviations like your function names above?

Quoted 8 lines

    PQAP_TAPQ,
    PQAP_RAPQ,
    PQAP_ZAPQ,
    PQAP_AQIC,
    PQAP_QCI,
    PQAP_QACT,
    PQAP_QBAP

Quoted 2 lines

Hmmmmmmm(TM)
My guess is that I tried making these constants readable without consulting architecture documents. But another option is using the constants that you suggested and adding comments with a long version.

I think that works out better; you won't have to abbreviate the longer version which will make it easier to understand.

Quoted 16 lines

Will do

[...]

Quoted 11 lines

lib/s390x/ap.h line 62

Quoted 6 lines
lib/s390x/ap.h new file +6 -0
+struct pqap_r0 {
+    uint32_t pad0;
+    uint8_t fc;
+    uint8_t t : 1;        /* Test facilities (TAPQ)*/
+    uint8_t pad1 : 7;
+    uint8_t ap;

This is the APID part of an APQN, so how about renaming to 'apid'

Quoted 7 lines
Quoted 4 lines

lib/s390x/ap.h line 63

Quoted 1 line
lib/s390x/ap.h new file +1 -0
+    uint8_t qn;

This is the APQI  part of an APQN, so how about renaming to 'apqi'

Hmm Linux uses qid
I'll change it to the Linux naming convention, might take me a while though

Well, the AP bus uses qid, but the vfio_ap module and the architecture doc uses APQN. In any case, it's a nit and I'm not terribly concerned about it.

Quoted 20 lines
Quoted 19 lines
Quoted 5 lines
lib/s390x/ap.h new file +2 -0
+} __attribute__((packed)) __attribute__((aligned(8)));
+

lib/s390x/ap.h line 75

Quoted 10 lines
lib/s390x/ap.h new file +10 -0
+struct pqap_r2 {
+    uint8_t s : 1;        /* Special Command facility */
+    uint8_t m : 1;        /* AP4KM */
+    uint8_t c : 1;        /* AP4KC */
+    uint8_t cop : 1;    /* AP is in coprocessor mode */
+    uint8_t acc : 1;    /* AP is in accelerator mode */
+    uint8_t xcp : 1;    /* AP is in XCP-mode */
+    uint8_t n : 1;        /* AP extended addressing facility */
+    uint8_t pad_0 : 1;
+    uint8_t pad_1[3];

Is there a reason why the 'Classification'  field is left out?

Quoted 1 line

It's not used in this library and therefore I chose to not name it to make structs a bit more readable.

Okay, not a problem.

Quoted 28 lines
Quoted 27 lines
Quoted 27 lines
lib/s390x/ap.h new file +7 -0
+    uint8_t at;
+    uint8_t nd;
+    uint8_t pad_6;
+    uint8_t pad_7 : 4;
+    uint8_t qd : 4;
+} __attribute__((packed))  __attribute__((aligned(8)));
+_Static_assert(sizeof(struct pqap_r2) == sizeof(uint64_t), "pqap_r2 

size");

lib/s390x/ap.h new file +3 -0
+
+bool ap_setup(void);
+int ap_pqap_tapq(uint8_t ap, uint8_t qn, struct ap_queue_status 

*apqsw,
+         struct pqap_r2 *r2);

lib/s390x/ap.h new file +2 -0
+int ap_pqap_qci(struct ap_config_info *info);
+#endif
s390x/Makefile +0 -0
index 7fce9f9d..4f6c627d 100644
@@ -110,6 +110,7 @@ cflatobjs += lib/s390x/malloc_io.o

   cflatobjs += lib/s390x/uv.o
   cflatobjs += lib/s390x/sie.o
   cflatobjs += lib/s390x/fault.o
+cflatobjs += lib/s390x/ap.o
      OBJDIRS += lib/s390x

#8 lore raw

Re: [kvm-unit-tests PATCH v4 1/7] lib: s390x: Add ap library

Quoted 47 lines · Harald Freudenberger
Quoted 46 lines · Anthony Krowiak
Quoted 28 lines · Janosch Frank
Quoted 9 lines · Anthony Krowiak

I made a few comments and suggestions. I am not very well-versed in the inline assembly code, so I'll leave that up to someone who is more knowledgeable. I copied @Harald since I believe it was him who wrote it.

Quoted 4 lines · Janosch Frank

Add functions and definitions needed to test the Adjunct Processor (AP) crypto interface.

[...]

Quoted 15 lines

lib/s390x/ap.c line 94

Quoted 10 lines
lib/s390x/ap.c new file +10 -0
+/* Will later be extended to a proper setup function */
+bool ap_setup(void)
+{
+    /*
+     * Base AP support has no STFLE or SCLP feature bit but the
+     * PQAP QCI support is indicated via stfle bit 12. As this
+     * library relies on QCI we bail out if it's not available.
+     */
+    if (!test_facility(12))
+        return false;

The STFLE.12 can be turned off when starting the guest, so this may not be a valid test.

Quoted 6 lines
Quoted 3 lines

We use the ap_instructions_available function (in ap.h) which executes the TAPQ command to verify whether the AP instructions are installed or not. Maybe you can do something similar here:

This library relies on QCI, hence we only check for stfle. I see no sense in manually probing the whole APQN space.

Makes sense. I was thrown off by the PQAP_FC enumeration which includes all of the AP function codes.

Quoted 3 lines

If stfle 12 is indicated I'd expect AP instructions to not generate exceptions or do they in a sane CPU model?

Quoted 8 lines
Quoted 3 lines

No, I would not expect PQAP(QCI) to generate an exception if STFLE 12 is indicated.

Hm, I am not sure if you can rely just on checking stfle bit 12 and if that's available assume you have AP instructions. I never tried this. But as far as I know the KVM guys there is a chance that you see a stfle bit 12 but get an illegal instruction exception the moment you call an AP instruction... Maybe check this before relying on such a thing.

In order to set stfle bit 12 in the CPU model for a guest (apqci=on), you first have to set ap=on in the CPU model indicating that you want AP installed on the guest; so I don't think you would ever see stfle 12 without having AP instructions. You can, however, have AP instructions without stfle 12 (apqci=off) in the CPU model.

Quoted 142 lines
Quoted 141 lines
Quoted 49 lines
Quoted 40 lines
Quoted 26 lines
lib/s390x/ap.c new file +3 -0
+
+    return true;
+}
lib/s390x/ap.h new file +14 -0
new file mode 100644
index 00000000..b806513f
@@ -0,0 +1,88 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * AP definitions
+ *
+ * Some parts taken from the Linux AP driver.
+ *
+ * Copyright IBM Corp. 2024
+ * Author: Janosch Frank <[email protected]>
+ *       Tony Krowiak <[email protected]>
+ *       Martin Schwidefsky <[email protected]>
+ *       Harald Freudenberger <[email protected]>
+ */
+
+#ifndef _S390X_AP_H_

lib/s390x/ap.h line 24

Quoted 10 lines
lib/s390x/ap.h new file +10 -0
+#define _S390X_AP_H_
+
+enum PQAP_FC {
+    PQAP_TEST_APQ,
+    PQAP_RESET_APQ,
+    PQAP_ZEROIZE_APQ,
+    PQAP_QUEUE_INT_CONTRL,
+    PQAP_QUERY_AP_CONF_INFO,
+    PQAP_QUERY_AP_COMP_TYPE,
+    PQAP_BEST_AP,

Maybe use abbreviations like your function names above?

Quoted 8 lines

    PQAP_TAPQ,
    PQAP_RAPQ,
    PQAP_ZAPQ,
    PQAP_AQIC,
    PQAP_QCI,
    PQAP_QACT,
    PQAP_QBAP

Quoted 2 lines

Hmmmmmmm(TM)
My guess is that I tried making these constants readable without consulting architecture documents. But another option is using the constants that you suggested and adding comments with a long version.

I think that works out better; you won't have to abbreviate the longer version which will make it easier to understand.

Quoted 16 lines

Will do

[...]

Quoted 11 lines

lib/s390x/ap.h line 62

Quoted 6 lines
lib/s390x/ap.h new file +6 -0
+struct pqap_r0 {
+    uint32_t pad0;
+    uint8_t fc;
+    uint8_t t : 1;        /* Test facilities (TAPQ)*/
+    uint8_t pad1 : 7;
+    uint8_t ap;

This is the APID part of an APQN, so how about renaming to 'apid'

Quoted 7 lines
Quoted 4 lines

lib/s390x/ap.h line 63

Quoted 1 line
lib/s390x/ap.h new file +1 -0
+    uint8_t qn;

This is the APQI  part of an APQN, so how about renaming to 'apqi'

Hmm Linux uses qid
I'll change it to the Linux naming convention, might take me a while though

Well, the AP bus uses qid, but the vfio_ap module and the architecture doc uses APQN. In any case, it's a nit and I'm not terribly concerned about it.

Quoted 20 lines
Quoted 19 lines
Quoted 5 lines
lib/s390x/ap.h new file +2 -0
+} __attribute__((packed)) __attribute__((aligned(8)));
+

lib/s390x/ap.h line 75

Quoted 10 lines
lib/s390x/ap.h new file +10 -0
+struct pqap_r2 {
+    uint8_t s : 1;        /* Special Command facility */
+    uint8_t m : 1;        /* AP4KM */
+    uint8_t c : 1;        /* AP4KC */
+    uint8_t cop : 1;    /* AP is in coprocessor mode */
+    uint8_t acc : 1;    /* AP is in accelerator mode */
+    uint8_t xcp : 1;    /* AP is in XCP-mode */
+    uint8_t n : 1;        /* AP extended addressing facility */
+    uint8_t pad_0 : 1;
+    uint8_t pad_1[3];

Is there a reason why the 'Classification'  field is left out?

Quoted 1 line

It's not used in this library and therefore I chose to not name it to make structs a bit more readable.

Okay, not a problem.

Quoted 28 lines
Quoted 27 lines
Quoted 27 lines
lib/s390x/ap.h new file +7 -0
+    uint8_t at;
+    uint8_t nd;
+    uint8_t pad_6;
+    uint8_t pad_7 : 4;
+    uint8_t qd : 4;
+} __attribute__((packed))  __attribute__((aligned(8)));
+_Static_assert(sizeof(struct pqap_r2) == sizeof(uint64_t), 

"pqap_r2 size");

lib/s390x/ap.h new file +3 -0
+
+bool ap_setup(void);
+int ap_pqap_tapq(uint8_t ap, uint8_t qn, struct ap_queue_status 

*apqsw,
+         struct pqap_r2 *r2);

lib/s390x/ap.h new file +2 -0
+int ap_pqap_qci(struct ap_config_info *info);
+#endif
s390x/Makefile +0 -0
index 7fce9f9d..4f6c627d 100644
@@ -110,6 +110,7 @@ cflatobjs += lib/s390x/malloc_io.o

   cflatobjs += lib/s390x/uv.o
   cflatobjs += lib/s390x/sie.o
   cflatobjs += lib/s390x/fault.o
+cflatobjs += lib/s390x/ap.o
      OBJDIRS += lib/s390x

#9 lore raw

PATCH v4 2/7 s390x: Add guest 2 AP test

In reply to Janosch Frank

Add a test that checks the exceptions for the PQAP, NQAP and DQAP adjunct processor (AP) crypto instructions.

Since triggering the exceptions doesn't require actual AP hardware, this test can run without complicated setup.

---
 s390x/Makefile      |   1 +
 s390x/ap.c          | 309 ++++++++++++++++++++++++++++++++++++++++++++
 s390x/unittests.cfg |   3 +
 3 files changed, 313 insertions(+)
 create mode 100644 s390x/ap.c
s390x/Makefile +1 -0
index 4f6c627d..6d28a5bf 100644
@@ -42,6 +42,7 @@ tests += $(TEST_DIR)/exittime.elf
 tests += $(TEST_DIR)/ex.elf
 tests += $(TEST_DIR)/topology.elf
 tests += $(TEST_DIR)/sie-dat.elf
+tests += $(TEST_DIR)/ap.elf
 
 pv-tests += $(TEST_DIR)/pv-diags.elf
 pv-tests += $(TEST_DIR)/pv-icptcode.elf
s390x/ap.c new file +309 -0

309 lines not on this page · raw message

s390x/unittests.cfg +3 -0
index 018e4129..578375e4 100644
@@ -386,3 +386,6 @@ file = sie-dat.elf
 
 [pv-attest]
 file = pv-attest.elf
+
+[ap]
+file = ap.elf
Signature · 1 line
2.40.1
Acked-by on v4 2/7
#10 lore raw

Re: [kvm-unit-tests PATCH v4 2/7] s390x: Add guest 2 AP test

I made a couple of function name change suggestions, but those are not critical:

Quoted 53 lines · Janosch Frank

Add a test that checks the exceptions for the PQAP, NQAP and DQAP adjunct processor (AP) crypto instructions.

Since triggering the exceptions doesn't require actual AP hardware, this test can run without complicated setup.

---
  s390x/Makefile      |   1 +
  s390x/ap.c          | 309 ++++++++++++++++++++++++++++++++++++++++++++
  s390x/unittests.cfg |   3 +
  3 files changed, 313 insertions(+)

create mode 100644 s390x/ap.c

s390x/Makefile +1 -0
index 4f6c627d..6d28a5bf 100644
@@ -42,6 +42,7 @@ tests += $(TEST_DIR)/exittime.elf
  tests += $(TEST_DIR)/ex.elf
  tests += $(TEST_DIR)/topology.elf
  tests += $(TEST_DIR)/sie-dat.elf
+tests += $(TEST_DIR)/ap.elf
 
  pv-tests += $(TEST_DIR)/pv-diags.elf
  pv-tests += $(TEST_DIR)/pv-icptcode.elf
s390x/ap.c new file +21 -0
new file mode 100644
index 00000000..b3cee37a
@@ -0,0 +1,309 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * AP instruction G2 tests
+ *
+ * Copyright (c) 2024 IBM Corp
+ *
+ * Authors:
+ *  Janosch Frank <[email protected]>
+ */
+
+#include <libcflat.h>
+#include <interrupt.h>
+#include <bitops.h>
+#include <alloc_page.h>
+#include <asm/facility.h>
+#include <asm/time.h>
+#include <ap.h>
+
+/* For PQAP PGM checks where we need full control over the input */
+static void pqap(unsigned long grs[3])
+{

s390x/ap.c line 31

Quoted 10 lines
s390x/ap.c new file +10 -0
+	asm volatile(
+		"	lgr	0,%[r0]\n"
+		"	lgr	1,%[r1]\n"
+		"	lgr	2,%[r2]\n"
+		"	.insn	rre,0xb2af0000,0,0\n" /* PQAP */
+		::  [r0] "d" (grs[0]), [r1] "d" (grs[1]), [r2] "d" (grs[2])
+		: "cc", "memory", "0", "1", "2");
+}
+
+static void test_pgms_pqap(void)

If I saw this function name without having read the patch description, I wouldn't have any idea what is being tested.

Maybe test_pqap_pgm_chk?

s390x/ap.c line 44

Quoted 13 lines
s390x/ap.c new file +13 -0
+{
+	unsigned long grs[3] = {};
+	struct pqap_r0 *r0 = (struct pqap_r0 *)grs;
+	uint8_t *data = alloc_page();
+	uint16_t pgm;
+	int fails = 0;
+	int i;
+
+	report_prefix_push("pqap");
+
+	/* Wrong FC code */
+	report_prefix_push("invalid fc");
+	r0->fc = 42;

Just out of curiosity, why 42? Why not some ridiculous number that will never be used for a function code, like 4294967295?

Quoted 56 lines
s390x/ap.c new file +56 -0
+	expect_pgm_int();
+	pqap(grs);
+	check_pgm_int_code(PGM_INT_CODE_SPECIFICATION);
+	memset(grs, 0, sizeof(grs));
+	report_prefix_pop();
+
+	report_prefix_push("invalid gr0 bits");
+	/*
+	 * GR0 bits 41 - 47 are defined 0 and result in a
+	 * specification exception if set to 1.
+	 */
+	for (i = 0; i < 48 - 41; i++) {
+		grs[0] = BIT(63 - 47 + i);
+
+		expect_pgm_int();
+		pqap(grs);
+		pgm = clear_pgm_int();
+
+		if (pgm != PGM_INT_CODE_SPECIFICATION) {
+			report_fail("fail on bit %d", 42 + i);
+			fails++;
+		}
+	}
+	report(!fails, "All bits tested");
+	memset(grs, 0, sizeof(grs));
+	fails = 0;
+	report_prefix_pop();
+
+	report_prefix_push("alignment");
+	report_prefix_push("fc=4");
+	r0->fc = PQAP_QUERY_AP_CONF_INFO;
+	grs[2] = (unsigned long)data;
+	for (i = 1; i < 8; i++) {
+		expect_pgm_int();
+		grs[2]++;
+		pqap(grs);
+		pgm = clear_pgm_int();
+		if (pgm != PGM_INT_CODE_SPECIFICATION) {
+			report_fail("fail on bit %d", i);
+			fails++;
+		}
+	}
+	report(!fails, "All alignments tested");
+	report_prefix_pop();
+	report_prefix_push("fc=6");
+	r0->fc = PQAP_BEST_AP;
+	grs[2] = (unsigned long)data;
+	for (i = 1; i < 8; i++) {
+		expect_pgm_int();
+		grs[2]++;
+		pqap(grs);
+		pgm = clear_pgm_int();
+		if (pgm != PGM_INT_CODE_SPECIFICATION) {
+			report_fail("fail on bit %d", i);
+			fails++;
+		}

s390x/ap.c line 110

Quoted 10 lines
s390x/ap.c new file +10 -0
+	}
+	report(!fails, "All alignments tested");
+	report_prefix_pop();
+	report_prefix_pop();
+
+	free_page(data);
+	report_prefix_pop();
+}
+
+static void test_pgms_nqap(void)

Same as above:
test_nqap_pgm_chk

Quoted 62 lines
s390x/ap.c new file +62 -0
+{
+	uint8_t gr0_zeroes_bits[] = {
+		32, 34, 35, 40
+	};
+	uint64_t gr0;
+	bool fail;
+	int i;
+
+	report_prefix_push("nqap");
+
+	/* Registers 0 and 1 are always used, the others are even/odd pairs */
+	report_prefix_push("spec");
+	report_prefix_push("r1");
+	expect_pgm_int();
+	asm volatile (
+		".insn	rre,0xb2ad0000,3,6\n"
+		: : : "cc", "memory", "0", "1", "2", "3", "4", "6", "7");
+	check_pgm_int_code(PGM_INT_CODE_SPECIFICATION);
+	report_prefix_pop();
+
+	report_prefix_push("r2");
+	expect_pgm_int();
+	asm volatile (
+		".insn	rre,0xb2ad0000,2,7\n"
+		: : : "cc", "memory", "0", "1", "2", "3", "4", "6", "7");
+	check_pgm_int_code(PGM_INT_CODE_SPECIFICATION);
+	report_prefix_pop();
+
+	report_prefix_push("both");
+	expect_pgm_int();
+	asm volatile (
+		".insn	rre,0xb2ad0000,3,7\n"
+		: : : "cc", "memory", "0", "1", "2", "3", "4", "6", "7");
+	check_pgm_int_code(PGM_INT_CODE_SPECIFICATION);
+	report_prefix_pop();
+
+	report_prefix_push("len==0");
+	expect_pgm_int();
+	asm volatile (
+		"xgr	0,0\n"
+		"xgr	5,5\n"
+		".insn	rre,0xb2ad0000,2,4\n"
+		: : : "cc", "memory", "0", "1", "2", "3", "4", "5", "6", "7");
+	check_pgm_int_code(PGM_INT_CODE_SPECIFICATION);
+	report_prefix_pop();
+
+	report_prefix_push("gr0_zero_bits");
+	fail = false;
+	for (i = 0; i < ARRAY_SIZE(gr0_zeroes_bits); i++) {
+		expect_pgm_int();
+		gr0 = BIT_ULL(63 - gr0_zeroes_bits[i]);
+		asm volatile (
+			"xgr	5,5\n"
+			"lghi	5, 128\n"
+			"lg	0, 0(%[val])\n"
+			".insn	rre,0xb2ad0000,2,4\n"
+			: : [val] "a" (&gr0)
+			: "cc", "memory", "0", "1", "2", "3", "4", "5", "6", "7");
+		if (clear_pgm_int() != PGM_INT_CODE_SPECIFICATION) {
+			report_fail("setting gr0 bit %d did not result in a spec exception",
+				    gr0_zeroes_bits[i]);
+			fail = true;

s390x/ap.c line 182

Quoted 10 lines
s390x/ap.c new file +10 -0
+		}
+	}
+	report(!fail, "set bit gr0 pgms");
+	report_prefix_pop();
+
+	report_prefix_pop();
+	report_prefix_pop();
+}
+
+static void test_pgms_dqap(void)

Same as above:
test_dqap_pgm_chk

Quoted 138 lines
s390x/ap.c new file +127 -0
+{
+	uint8_t gr0_zeroes_bits[] = {
+		33, 34, 35, 40, 41
+	};
+	uint64_t gr0;
+	bool fail;
+	int i;
+
+	report_prefix_push("dqap");
+
+	/* Registers 0 and 1 are always used, the others are even/odd pairs */
+	report_prefix_push("spec");
+	report_prefix_push("r1");
+	expect_pgm_int();
+	asm volatile (
+		".insn	rre,0xb2ae0000,3,6\n"
+		: : : "cc", "memory", "0", "1", "2", "3", "4", "6", "7");
+	check_pgm_int_code(PGM_INT_CODE_SPECIFICATION);
+	report_prefix_pop();
+
+	report_prefix_push("r2");
+	expect_pgm_int();
+	asm volatile (
+		".insn	rre,0xb2ae0000,2,7\n"
+		: : : "cc", "memory", "0", "1", "2", "3", "4", "6", "7");
+	check_pgm_int_code(PGM_INT_CODE_SPECIFICATION);
+	report_prefix_pop();
+
+	report_prefix_push("both");
+	expect_pgm_int();
+	asm volatile (
+		".insn	rre,0xb2ae0000,3,7\n"
+		: : : "cc", "memory", "0", "1", "2", "3", "4", "6", "7");
+	check_pgm_int_code(PGM_INT_CODE_SPECIFICATION);
+	report_prefix_pop();
+
+	report_prefix_push("len==0");
+	expect_pgm_int();
+	asm volatile (
+		"xgr	0,0\n"
+		"xgr	5,5\n"
+		".insn	rre,0xb2ae0000,2,4\n"
+		: : : "cc", "memory", "0", "1", "2", "3", "4", "5", "6", "7");
+	check_pgm_int_code(PGM_INT_CODE_SPECIFICATION);
+	report_prefix_pop();
+
+	report_prefix_push("gr0_zero_bits");
+	fail = false;
+	for (i = 0; i < ARRAY_SIZE(gr0_zeroes_bits); i++) {
+		expect_pgm_int();
+		gr0 = BIT_ULL(63 - gr0_zeroes_bits[i]);
+		asm volatile (
+			"xgr	5,5\n"
+			"lghi	5, 128\n"
+			"lg	0, 0(%[val])\n"
+			".insn	rre,0xb2ae0000,2,4\n"
+			: : [val] "a" (&gr0)
+			: "cc", "memory", "0", "1", "2", "3", "4", "5", "6", "7");
+		if (clear_pgm_int() != PGM_INT_CODE_SPECIFICATION) {
+			report_info("setting gr0 bit %d did not result in a spec exception",
+				    gr0_zeroes_bits[i]);
+			fail = true;
+		}
+	}
+	report(!fail, "set bit pgms");
+	report_prefix_pop();
+
+	report_prefix_pop();
+	report_prefix_pop();
+}
+
+static void test_priv(void)
+{
+	struct ap_config_info info = {};
+
+	report_prefix_push("privileged");
+
+	report_prefix_push("pqap");
+	expect_pgm_int();
+	enter_pstate();
+	ap_pqap_qci(&info);
+	check_pgm_int_code(PGM_INT_CODE_PRIVILEGED_OPERATION);
+	report_prefix_pop();
+
+	/*
+	 * Enqueue and dequeue take too many registers so a simple
+	 * inline assembly makes more sense than using the library
+	 * functions.
+	 */
+	report_prefix_push("nqap");
+	expect_pgm_int();
+	enter_pstate();
+	asm volatile (
+		".insn	rre,0xb2ad0000,0,2\n"
+		: : : "cc", "memory", "0", "1", "2", "3");
+	check_pgm_int_code(PGM_INT_CODE_PRIVILEGED_OPERATION);
+	report_prefix_pop();
+
+	report_prefix_push("dqap");
+	expect_pgm_int();
+	enter_pstate();
+	asm volatile (
+		".insn	rre,0xb2ae0000,0,2\n"
+		: : : "cc", "memory", "0", "1", "2", "3");
+	check_pgm_int_code(PGM_INT_CODE_PRIVILEGED_OPERATION);
+	report_prefix_pop();
+
+	report_prefix_pop();
+}
+
+int main(void)
+{
+	report_prefix_push("ap");
+	if (!ap_check()) {
+		report_skip("AP instructions not available");
+		goto done;
+	}
+
+	test_priv();
+	test_pgms_pqap();
+	test_pgms_nqap();
+	test_pgms_dqap();
+
+done:
+	report_prefix_pop();
+	return report_summary();
+}
s390x/unittests.cfg +3 -0
index 018e4129..578375e4 100644
@@ -386,3 +386,6 @@ file = sie-dat.elf
 
  [pv-attest]
  file = pv-attest.elf
+
+[ap]
+file = ap.elf
#11 lore raw

Re: [kvm-unit-tests PATCH v4 2/7] s390x: Add guest 2 AP test

Quoted 74 lines · Anthony Krowiak

I made a couple of function name change suggestions, but those are not critical:

Quoted 53 lines · Janosch Frank

Add a test that checks the exceptions for the PQAP, NQAP and DQAP adjunct processor (AP) crypto instructions.

Since triggering the exceptions doesn't require actual AP hardware, this test can run without complicated setup.

---
   s390x/Makefile      |   1 +
   s390x/ap.c          | 309 ++++++++++++++++++++++++++++++++++++++++++++
   s390x/unittests.cfg |   3 +
   3 files changed, 313 insertions(+)

create mode 100644 s390x/ap.c

s390x/Makefile +1 -0
index 4f6c627d..6d28a5bf 100644
@@ -42,6 +42,7 @@ tests += $(TEST_DIR)/exittime.elf
   tests += $(TEST_DIR)/ex.elf
   tests += $(TEST_DIR)/topology.elf
   tests += $(TEST_DIR)/sie-dat.elf
+tests += $(TEST_DIR)/ap.elf
 
   pv-tests += $(TEST_DIR)/pv-diags.elf
   pv-tests += $(TEST_DIR)/pv-icptcode.elf
s390x/ap.c new file +21 -0
new file mode 100644
index 00000000..b3cee37a
@@ -0,0 +1,309 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * AP instruction G2 tests
+ *
+ * Copyright (c) 2024 IBM Corp
+ *
+ * Authors:
+ *  Janosch Frank <[email protected]>
+ */
+
+#include <libcflat.h>
+#include <interrupt.h>
+#include <bitops.h>
+#include <alloc_page.h>
+#include <asm/facility.h>
+#include <asm/time.h>
+#include <ap.h>
+
+/* For PQAP PGM checks where we need full control over the input */
+static void pqap(unsigned long grs[3])
+{

s390x/ap.c line 31

Quoted 10 lines
s390x/ap.c new file +10 -0
+	asm volatile(
+		"	lgr	0,%[r0]\n"
+		"	lgr	1,%[r1]\n"
+		"	lgr	2,%[r2]\n"
+		"	.insn	rre,0xb2af0000,0,0\n" /* PQAP */
+		::  [r0] "d" (grs[0]), [r1] "d" (grs[1]), [r2] "d" (grs[2])
+		: "cc", "memory", "0", "1", "2");
+}
+
+static void test_pgms_pqap(void)

If I saw this function name without having read the patch description, I wouldn't have any idea what is being tested.

Quoted 1 line

Maybe test_pqap_pgm_chk?

If I'm not mistaken, then it should be consistent with the pgm checks for other instructions but I don't mind renaming it.

Quoted 11 lines
Quoted 11 lines
s390x/ap.c new file +9 -0
+{
+	unsigned long grs[3] = {};
+	struct pqap_r0 *r0 = (struct pqap_r0 *)grs;
+	uint8_t *data = alloc_page();
+	uint16_t pgm;
+	int fails = 0;
+	int i;
+
+	report_prefix_push("pqap");
Quoted 8 lines

s390x/ap.c line 44

Quoted 4 lines
s390x/ap.c new file +4 -0
+
+	/* Wrong FC code */
+	report_prefix_push("invalid fc");
+	r0->fc = 42;

Just out of curiosity, why 42? Why not some ridiculous number that will never be used for a function code, like 4294967295?

No particular reason.

Increasing the number would increase the buffer zone of invalid values but there's currently only a hand full of values defined anyway. I might add a couple of 0s to this for the next version and call it a day.

#12 lore raw

PATCH v4 3/7 lib: s390x: ap: Add proper ap setup code

In reply to Janosch Frank

For the next tests we need a valid queue which means we need to grab the qci info and search the first set bit in the ap and aq masks.

Let's move from the stfle 12 check to proper setup code that also returns arrays for the aps and qns.

---
 lib/s390x/ap.c | 90 +++++++++++++++++++++++++++++++++++++++++++++++---
 lib/s390x/ap.h | 17 +++++++++-
 s390x/ap.c     |  4 ++-
 3 files changed, 105 insertions(+), 6 deletions(-)
lib/s390x/ap.c +86 -4
index 9560ff64..c85172a8 100644
@@ -13,10 +13,18 @@
 
 #include <libcflat.h>
 #include <interrupt.h>
+#include <alloc.h>
+#include <bitops.h>
 #include <ap.h>
 #include <asm/time.h>
 #include <asm/facility.h>
 
+static uint8_t num_ap;
+static uint8_t num_queue;
+static uint8_t *array_ap;
+static uint8_t *array_queue;
+static struct ap_config_info qci;
+
 int ap_pqap_tapq(uint8_t ap, uint8_t qn, struct ap_queue_status *apqsw,
 		 struct pqap_r2 *r2)
 {
@@ -82,16 +90,90 @@ int ap_pqap_qci(struct ap_config_info *info)
 	return cc;
 }
 
-/* Will later be extended to a proper setup function */
-bool ap_setup(void)
+static int get_entry(uint8_t *ptr, int i, size_t len)
 {
+	/* Skip over the last entry */
+	if (i)
+		i++;
+
+	for (; i < 8 * len; i++) {
+		/* Do we even need to check the byte? */
+		if (!ptr[i / 8]) {
+			i += 7;
+			continue;
+		}
+
+		/* Check the bit in big-endian order */
+		if (ptr[i / 8] & BIT(7 - (i % 8)))
+			return i;
+	}
+	return -1;
+}
+
+static void setup_info(void)
+{
+	int i, entry = 0;
+
+	ap_pqap_qci(&qci);
+
+	for (i = 0; i < AP_ARRAY_MAX_NUM; i++) {
+		entry = get_entry((uint8_t *)qci.apm, entry, sizeof(qci.apm));
+		if (entry == -1)
+			break;
+
+		if (!num_ap) {
+			/*
+			 * We have at least one AP, time to
+			 * allocate the queue arrays
+			 */
+			array_ap = malloc(AP_ARRAY_MAX_NUM);
+			array_queue = malloc(AP_ARRAY_MAX_NUM);
+		}
+		array_ap[num_ap] = entry;
+		num_ap += 1;
+	}
+
+	/* Without an AP we don't even need to look at the queues */
+	if (!num_ap)
+		return;
+
+	entry = 0;
+	for (i = 0; i < AP_ARRAY_MAX_NUM; i++) {
+		entry = get_entry((uint8_t *)qci.aqm, entry, sizeof(qci.aqm));
+		if (entry == -1)
+			return;
+
+		array_queue[num_queue] = entry;
+		num_queue += 1;
+	}
+
+}
+
+int ap_setup(uint8_t **ap_array, uint8_t **qn_array, uint8_t *naps, uint8_t *nqns)
+{
+	assert(!num_ap);
+
 	/*
 	 * Base AP support has no STFLE or SCLP feature bit but the
 	 * PQAP QCI support is indicated via stfle bit 12. As this
 	 * library relies on QCI we bail out if it's not available.
 	 */
 	if (!test_facility(12))
-		return false;
+		return AP_SETUP_NOINSTR;
 
-	return true;
+	/* Setup ap and queue arrays */
+	setup_info();
+
+	if (!num_ap)
+		return AP_SETUP_NOAPQN;
+
+	/* Only provide the data if the caller actually needs it. */
+	if (ap_array && qn_array && naps && nqns) {
+		*ap_array = array_ap;
+		*qn_array = array_queue;
+		*naps = num_ap;
+		*nqns = num_queue;
+	}
+
+	return AP_SETUP_READY;
 }
lib/s390x/ap.h +16 -1
index b806513f..8feca43a 100644
@@ -81,7 +81,22 @@ struct pqap_r2 {
 } __attribute__((packed))  __attribute__((aligned(8)));
 _Static_assert(sizeof(struct pqap_r2) == sizeof(uint64_t), "pqap_r2 size");
 
-bool ap_setup(void);
+/*
+ * Maximum number of APQNs that we keep track of.
+ *
+ * This value is already way larger than the number of APQNs a AP test
+ * is probably going to use.
+ */
+#define AP_ARRAY_MAX_NUM	16
+
+/* Return values of ap_setup() */
+enum {
+	AP_SETUP_NOINSTR,	/* AP instructions not available */
+	AP_SETUP_NOAPQN,	/* Instructions available but no APQNs */
+	AP_SETUP_READY		/* Full setup complete, at least one APQN */
+};
+
+int ap_setup(uint8_t **ap_array, uint8_t **qn_array, uint8_t *naps, uint8_t *nqns);
 int ap_pqap_tapq(uint8_t ap, uint8_t qn, struct ap_queue_status *apqsw,
 		 struct pqap_r2 *r2);
 int ap_pqap_qci(struct ap_config_info *info);
s390x/ap.c +3 -1
index b3cee37a..5c458e7e 100644
@@ -292,8 +292,10 @@ static void test_priv(void)
 
 int main(void)
 {
+	int setup_rc = ap_setup(NULL, NULL, NULL, NULL);
+
 	report_prefix_push("ap");
-	if (!ap_check()) {
+	if (setup_rc == AP_SETUP_NOINSTR) {
 		report_skip("AP instructions not available");
 		goto done;
 	}
Signature · 1 line
2.40.1
#13 lore raw

PATCH v4 4/7 s390x: ap: Add pqap aqic tests

In reply to Janosch Frank

Let's check if we can enable/disable interrupts and if all errors are reported if we specify bad addresses for the notification indication byte.

---
 lib/s390x/ap.c | 35 +++++++++++++++++++++++
 lib/s390x/ap.h | 11 ++++++++
 s390x/ap.c     | 75 +++++++++++++++++++++++++++++++++++++++++++++++++-
 3 files changed, 120 insertions(+), 1 deletion(-)
lib/s390x/ap.c +35 -0
index c85172a8..4e7d3d34 100644
@@ -60,6 +60,41 @@ int ap_pqap_tapq(uint8_t ap, uint8_t qn, struct ap_queue_status *apqsw,
 	return cc;
 }
 
+int ap_pqap_aqic(uint8_t ap, uint8_t qn, struct ap_queue_status *apqsw,
+		 struct ap_qirq_ctrl aqic, unsigned long addr)
+{
+	uint64_t bogus_cc = 2;
+	struct pqap_r0 r0 = {};
+	int cc;
+
+	/*
+	 * AP-Queue Interruption Control
+	 *
+	 * Enables/disables interrupts for a APQN
+	 *
+	 * Inputs: 0,1,2
+	 * Outputs: 1 (APQSW)
+	 * Synchronous
+	 */
+	r0.ap = ap;
+	r0.qn = qn;
+	r0.fc = PQAP_QUEUE_INT_CONTRL;
+	asm volatile(
+		"       tmll	%[bogus_cc],3\n"
+		"	lgr	0,%[r0]\n"
+		"	lgr	1,%[aqic]\n"
+		"	lgr	2,%[addr]\n"
+		"	.insn	rre,0xb2af0000,0,0\n" /* PQAP */
+		"	stg	1, %[apqsw]\n"
+		"	ipm	%[cc]\n"
+		"	srl	%[cc],28\n"
+		: [apqsw] "=&T" (*apqsw), [cc] "=&d" (cc)
+		: [r0] "d" (r0), [aqic] "d" (aqic), [addr] "d" (addr), [bogus_cc] "d" (bogus_cc)
+		: "cc", "memory", "0", "2");
+
+	return cc;
+}
+
 int ap_pqap_qci(struct ap_config_info *info)
 {
 	struct pqap_r0 r0 = { .fc = PQAP_QUERY_AP_CONF_INFO };
lib/s390x/ap.h +11 -0
index 8feca43a..15394d56 100644
@@ -81,6 +81,15 @@ struct pqap_r2 {
 } __attribute__((packed))  __attribute__((aligned(8)));
 _Static_assert(sizeof(struct pqap_r2) == sizeof(uint64_t), "pqap_r2 size");
 
+struct ap_qirq_ctrl {
+	uint64_t res0 : 16;
+	uint64_t ir    : 1;	/* ir flag: enable (1) or disable (0) irq */
+	uint64_t res1 : 44;
+	uint64_t isc   : 3;	/* irq sub class */
+} __attribute__((packed))  __attribute__((aligned(8)));
+_Static_assert(sizeof(struct ap_qirq_ctrl) == sizeof(uint64_t),
+	       "struct ap_qirq_ctrl size");
+
 /*
  * Maximum number of APQNs that we keep track of.
  *
@@ -100,4 +109,6 @@ int ap_setup(uint8_t **ap_array, uint8_t **qn_array, uint8_t *naps, uint8_t *nqn
 int ap_pqap_tapq(uint8_t ap, uint8_t qn, struct ap_queue_status *apqsw,
 		 struct pqap_r2 *r2);
 int ap_pqap_qci(struct ap_config_info *info);
+int ap_pqap_aqic(uint8_t ap, uint8_t qn, struct ap_queue_status *apqsw,
+		 struct ap_qirq_ctrl aqic, unsigned long addr);
 #endif
s390x/ap.c +74 -1

99 lines not on this page · raw message

Signature · 1 line
2.40.1
#14 lore raw

PATCH v4 5/7 s390x: ap: Add reset tests

In reply to Janosch Frank

Test if the IRQ enablement is turned off on a reset or zeroize PQAP.

---
 lib/s390x/ap.c | 71 +++++++++++++++++++++++++++++++++++++++++++
 lib/s390x/ap.h |  4 +++
 s390x/ap.c     | 81 ++++++++++++++++++++++++++++++++++++++++++++++++--
 3 files changed, 154 insertions(+), 2 deletions(-)
lib/s390x/ap.c +71 -0
index 4e7d3d34..0f92739d 100644
@@ -125,6 +125,77 @@ int ap_pqap_qci(struct ap_config_info *info)
 	return cc;
 }
 
+static int pqap_reset(uint8_t ap, uint8_t qn, struct ap_queue_status *apqsw,
+		      bool zeroize)
+{
+	uint64_t bogus_cc = 2;
+	struct pqap_r0 r0 = {};
+	int cc;
+
+	/*
+	 * Reset/zeroize AP Queue
+	 *
+	 * Resets/zeroizes a queue and disables IRQs
+	 *
+	 * Inputs: GR0
+	 * Outputs: GR1 (APQSW)
+	 * Asynchronous
+	 */
+	r0.ap = ap;
+	r0.qn = qn;
+	r0.fc = zeroize ? PQAP_ZEROIZE_APQ : PQAP_RESET_APQ;
+	asm volatile(
+		"       tmll	%[bogus_cc],3\n"
+		"	lgr	0,%[r0]\n"
+		"	.insn	rre,0xb2af0000,0,0\n" /* PQAP */
+		"	stg	1, %[apqsw]\n"
+		"	ipm	%[cc]\n"
+		"	srl	%[cc],28\n"
+		: [apqsw] "=&T" (*apqsw), [cc] "=&d" (cc)
+		: [r0] "d" (r0), [bogus_cc] "d" (bogus_cc)
+		: "memory");
+
+	return cc;
+}
+
+static int pqap_reset_wait(uint8_t ap, uint8_t qn, struct ap_queue_status *apqsw,
+			   bool zeroize)
+{
+	struct pqap_r2 r2 = {};
+	int cc;
+
+	cc = pqap_reset(ap, qn, apqsw, zeroize);
+
+	/* On a cc == 3 / error we don't need to wait */
+	if (cc)
+		return cc;
+
+	/*
+	 * TAPQ returns AP_RC_RESET_IN_PROGRESS if a reset is being
+	 * processed
+	 */
+	do {
+		/* Give it some time to process before the retry */
+		mdelay(20);
+		cc = ap_pqap_tapq(ap, qn, apqsw, &r2);
+	} while (apqsw->rc == AP_RC_RESET_IN_PROGRESS);
+
+	if (apqsw->rc)
+		printf("Wait for reset failed on ap %d queue %d with tapq rc %d.",
+			ap, qn, apqsw->rc);
+	return cc;
+}
+
+int ap_pqap_reset(uint8_t ap, uint8_t qn, struct ap_queue_status *apqsw)
+{
+	return pqap_reset_wait(ap, qn, apqsw, false);
+}
+
+int ap_pqap_reset_zeroize(uint8_t ap, uint8_t qn, struct ap_queue_status *apqsw)
+{
+	return pqap_reset_wait(ap, qn, apqsw, true);
+}
+
 static int get_entry(uint8_t *ptr, int i, size_t len)
 {
 	/* Skip over the last entry */
lib/s390x/ap.h +4 -0
index 15394d56..dbdb55c4 100644
@@ -14,6 +14,8 @@
 #ifndef _S390X_AP_H_
 #define _S390X_AP_H_
 
+#define AP_RC_RESET_IN_PROGRESS	0x02
+
 enum PQAP_FC {
 	PQAP_TEST_APQ,
 	PQAP_RESET_APQ,
@@ -108,6 +110,8 @@ enum {
 int ap_setup(uint8_t **ap_array, uint8_t **qn_array, uint8_t *naps, uint8_t *nqns);
 int ap_pqap_tapq(uint8_t ap, uint8_t qn, struct ap_queue_status *apqsw,
 		 struct pqap_r2 *r2);
+int ap_pqap_reset(uint8_t ap, uint8_t qn, struct ap_queue_status *apqsw);
+int ap_pqap_reset_zeroize(uint8_t ap, uint8_t qn, struct ap_queue_status *apqsw);
 int ap_pqap_qci(struct ap_config_info *info);
 int ap_pqap_aqic(uint8_t ap, uint8_t qn, struct ap_queue_status *apqsw,
 		 struct ap_qirq_ctrl aqic, unsigned long addr);
s390x/ap.c +79 -2

101 lines not on this page · raw message

Signature · 1 line
2.40.1
#15 lore raw

PATCH v4 6/7 lib: s390x: ap: Add tapq test facility bit

In reply to Janosch Frank

When the t bit is one the first 32 bits of register 2 are populated on a tapq. Those bits tell us in which mode the queu is and which facilities it supports.

---
 lib/s390x/ap.c |  5 +++--
 lib/s390x/ap.h |  2 +-
 s390x/ap.c     | 12 ++++++------
 3 files changed, 10 insertions(+), 9 deletions(-)
lib/s390x/ap.c +3 -2
index 0f92739d..64705a56 100644
@@ -26,11 +26,12 @@ static uint8_t *array_queue;
 static struct ap_config_info qci;
 
 int ap_pqap_tapq(uint8_t ap, uint8_t qn, struct ap_queue_status *apqsw,
-		 struct pqap_r2 *r2)
+		 struct pqap_r2 *r2, bool t)
 {
 	struct pqap_r0 r0 = {
 		.ap = ap,
 		.qn = qn,
+		.t = t,
 		.fc = PQAP_TEST_APQ
 	};
 	uint64_t bogus_cc = 2;
@@ -177,7 +178,7 @@ static int pqap_reset_wait(uint8_t ap, uint8_t qn, struct ap_queue_status *apqsw
 	do {
 		/* Give it some time to process before the retry */
 		mdelay(20);
-		cc = ap_pqap_tapq(ap, qn, apqsw, &r2);
+		cc = ap_pqap_tapq(ap, qn, apqsw, &r2, false);
 	} while (apqsw->rc == AP_RC_RESET_IN_PROGRESS);
 
 	if (apqsw->rc)
lib/s390x/ap.h +1 -1
index dbdb55c4..eecb39be 100644
@@ -109,7 +109,7 @@ enum {
 
 int ap_setup(uint8_t **ap_array, uint8_t **qn_array, uint8_t *naps, uint8_t *nqns);
 int ap_pqap_tapq(uint8_t ap, uint8_t qn, struct ap_queue_status *apqsw,
-		 struct pqap_r2 *r2);
+		 struct pqap_r2 *r2, bool t);
 int ap_pqap_reset(uint8_t ap, uint8_t qn, struct ap_queue_status *apqsw);
 int ap_pqap_reset_zeroize(uint8_t ap, uint8_t qn, struct ap_queue_status *apqsw);
 int ap_pqap_qci(struct ap_config_info *info);
s390x/ap.c +6 -6
index 38be03eb..0f2d03c2 100644
@@ -325,7 +325,7 @@ static void test_pqap_aqic(void)
 
 	do {
 		mdelay(20);
-		cc = ap_pqap_tapq(apn, qn, &apqsw, &r2);
+		cc = ap_pqap_tapq(apn, qn, &apqsw, &r2, false);
 	} while (cc == 0 && apqsw.irq_enabled == 0);
 	report(cc == 0 && apqsw.irq_enabled == 1, "enable IRQs tapq data");
 
@@ -338,7 +338,7 @@ static void test_pqap_aqic(void)
 
 	do {
 		mdelay(20);
-		cc = ap_pqap_tapq(apn, qn, &apqsw, &r2);
+		cc = ap_pqap_tapq(apn, qn, &apqsw, &r2, false);
 	} while (cc == 0 && apqsw.irq_enabled == 1);
 	report(cc == 0 && apqsw.irq_enabled == 0, "disable IRQs tapq data");
 
@@ -365,12 +365,12 @@ static void test_pqap_resets(void)
 
 	do {
 		mdelay(20);
-		cc = ap_pqap_tapq(apn, qn, &apqsw, &r2);
+		cc = ap_pqap_tapq(apn, qn, &apqsw, &r2, false);
 	} while (cc == 0 && apqsw.irq_enabled == 0);
 	report(apqsw.irq_enabled == 1, "IRQs enabled tapq data");
 
 	ap_pqap_reset(apn, qn, &apqsw);
-	cc = ap_pqap_tapq(apn, qn, &apqsw, &r2);
+	cc = ap_pqap_tapq(apn, qn, &apqsw, &r2, false);
 	assert(!cc);
 	report(apqsw.irq_enabled == 0, "IRQs have been disabled via reset");
 
@@ -385,12 +385,12 @@ static void test_pqap_resets(void)
 
 	do {
 		mdelay(20);
-		cc = ap_pqap_tapq(apn, qn, &apqsw, &r2);
+		cc = ap_pqap_tapq(apn, qn, &apqsw, &r2, false);
 	} while (cc == 0 && apqsw.irq_enabled == 0);
 	report(apqsw.irq_enabled == 1, "IRQs enabled tapq data");
 
 	ap_pqap_reset_zeroize(apn, qn, &apqsw);
-	cc = ap_pqap_tapq(apn, qn, &apqsw, &r2);
+	cc = ap_pqap_tapq(apn, qn, &apqsw, &r2, false);
 	assert(!cc);
 	report(apqsw.irq_enabled == 0, "IRQs have been disabled via reset");
 
Signature · 1 line
2.40.1
#16 lore raw

PATCH v4 7/7 s390x: ap: Add nq/dq len test

In reply to Janosch Frank

For years the nqap/dqap max length was 12KB but with a recent machine extended message length support was introduced. The support is AP type and generation specific, so it can vary from card to card which complicates testing by a lot.

This test will use the APQN that all other tests use no matter if there's extended length support or not. But if longer messages are supported by the APQN we need to adapt our tests.

---
 lib/s390x/ap.h |   3 +-
 s390x/ap.c     | 103 +++++++++++++++++++++++++++++++++++++++++++++++++
 2 files changed, 105 insertions(+), 1 deletion(-)
lib/s390x/ap.h +2 -1
index eecb39be..792149ea 100644
@@ -77,7 +77,8 @@ struct pqap_r2 {
 	uint8_t pad_1[3];
 	uint8_t at;
 	uint8_t nd;
-	uint8_t pad_6;
+	uint8_t pad_6 : 4;
+	uint8_t ml : 4;
 	uint8_t pad_7 : 4;
 	uint8_t qd : 4;
 } __attribute__((packed))  __attribute__((aligned(8)));
s390x/ap.c +103 -0

115 lines not on this page · raw message

Signature · 1 line
2.40.1