Skip to contentSkip to conversation

: Nforce3-250 has no working support for front microphone

ALSA - driver 0001346 [email protected] 1 participant 1 message Aug 17, 2005

lore
Share & tools
lore
#0 lore raw

The following issue has been SUBMITTED.
======================================================================
<https://bugtrack.alsa-project.org/alsa-bug/view.php?id=1346>
======================================================================
Reported By: alchemyx
Assigned To:
======================================================================

Project:                    ALSA - driver
Issue ID:                   1346
Category:                   PCI - intel8x0
Reproducibility:            always
Severity:                   minor
Priority:                   normal
Status:                     new
Distribution:               Gentoo
Kernel Version:             2.6.12
======================================================================
Date Submitted:             08-17-2005 11:04 CEST
Last Modified:              08-17-2005 11:04 CEST

======================================================================
Summary: Nforce3-250 has no working support for front
microphone
Description:
I have nforce3-250 based motherboard. It uses i8x0 drivers for its sound chip, my output from lspci:

0000:00:06.0 Multimedia audio controller: nVidia Corporation nForce3 250Gb AC'97 Audio Controller (rev a1)
Subsystem: Giga-byte Technology: Unknown device a002
Flags: bus master, 66Mhz, fast devsel, latency 0, IRQ 21 I/O ports at e000
I/O ports at e400 [size=128]
Memory at fa002000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [44] Power Management version 2

That soundcard is supported quite well. Playing and also recording sounds just fine. Only problem is that I have front audio panel built in my case, where I can connect microphone and headphones. Headphones work fine, but I can't get recording from microphone connected to front panel.

Tweaking with mixer didn't help. Only solution was to use binary nvsound from nvidia drivers which is, to be honest, poor quality. Also it works fine under Windows.

So it seems that there is something missing or wrong in current i8x0 driver.
======================================================================

Issue History
Date Modified Username Field Change
======================================================================

08-17-05 11:04 alchemyx       New Issue                                    
08-17-05 11:04 alchemyx       Distribution              => Gentoo          
08-17-05 11:04 alchemyx       Kernel Version            => 2.6.12          

======================================================================

-------------------------------------------------------
SF.Net email is Sponsored by the Better Software Conference & EXPO September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices Agile & Plan-Driven Development * Managing Projects & Teams * Testing & QA Security * Process Improvement & Measurement * http://www.sqe.com/bsce5sf