shell: Add checkpoints api for new lib
PATCH 1/2 shell: Add checkpoints api for new lib
From: Joerg Vehlow <[email protected]>
The checkpoint api is even mentioned in shell-test-api.txt, but with the old library used.
This also fixes the documentation.
memcg_lib.sh must be adapted in the same commit, because it already sets TST_NEEDS_CHECKPOINTS=1 and had the ipc initialization code. This would run the ipc initialization code twice.
--- doc/shell-test-api.txt | 4 +- .../controllers/memcg/functional/memcg_lib.sh | 8 ---- testcases/lib/tst_test.sh | 41 ++++++++++++++++++- 3 files changed, 42 insertions(+), 11 deletions(-)
doc/shell-test-api.txt +2 -2
@@ -729,14 +729,14 @@ The shell library provides an implementation of the checkpoint interface compatible with the C version. All 'TST_CHECKPOINT_*' functions are available. In order to initialize checkpoints '$TST_NEEDS_CHECKPOINTS' must be set to '1' -before the inclusion of 'test.sh': +before the inclusion of 'tst_test.sh': [source,sh] ------------------------------------------------------------------------------- #!/bin/sh TST_NEEDS_CHECKPOINTS=1 -. test.sh +. tst_test.sh ------------------------------------------------------------------------------- Since both the implementations are compatible, it's also possible to start
testcases/kernel/controllers/memcg/functional/memcg_lib.sh +0 -8
@@ -69,14 +69,6 @@ memcg_setup() tst_brk TCONF "Either kernel does not support Memory Resource Controller or feature not enabled" fi - # Setup IPC - LTP_IPC_PATH="/dev/shm/ltp_${TCID}_$$" - LTP_IPC_SIZE=$PAGESIZE - ROD_SILENT dd if=/dev/zero of="$LTP_IPC_PATH" bs="$LTP_IPC_SIZE" count=1 - ROD_SILENT chmod 600 "$LTP_IPC_PATH" - export LTP_IPC_PATH - # Setup IPC end - ROD mkdir /dev/memcg ROD mount -t cgroup -omemory memcg /dev/memcg
testcases/lib/tst_test.sh +40 -1
65 lines not on this page · raw message
Signature · 1 line
2.25.1
PATCH 2/2 pec: Improve reliability
From: Joerg Vehlow <[email protected]>
This fixes two problems:
1. It was possible, that the event listener was terminated, before all events were recorded.
The listener now terminates, after receiving the exit event of the generator. This also gets rid of the 100ms sleep in cn_pec.sh by
using proper synchronization points.
2. Sometimes exit events were generated in the wrong order, Adding a short delay seems to solve this. While this adds in a new sleep, it is just a 1 ms for default the execution.
--- testcases/kernel/connectors/pec/cn_pec.sh | 36 ++++--- .../kernel/connectors/pec/event_generator.c | 97 ++++++++++--------- .../kernel/connectors/pec/pec_listener.c | 56 ++++++++++- 3 files changed, 128 insertions(+), 61 deletions(-)
testcases/kernel/connectors/pec/cn_pec.sh +22 -14
@@ -16,12 +16,16 @@ TST_PARSE_ARGS=parse_args TST_USAGE=usage TST_NEEDS_ROOT=1 TST_NEEDS_TMPDIR=1 +TST_NEEDS_CHECKPOINTS=1 TST_TEST_DATA="fork exec exit uid gid" . tst_test.sh num_events=10 +LISTENER_ID=0 +GENERATOR_ID=1 + usage() { cat << EOF
@@ -67,27 +71,31 @@ setup() test() { local event=$2 - local expected_events lis_rc pid fd_act failed act_nevents exp act + local gen_pid list_pid gen_rc lis_rc + local expected_events fd_act failed act_nevents exp act tst_res TINFO "Testing $2 event (nevents=$num_events)" - pec_listener >lis_$event.log 2>lis_$event.err & - pid=$! - # wait for pec_listener to start listening - tst_sleep 100ms + event_generator -n $num_events -e $event -c $GENERATOR_ID >gen.log & + gen_pid=$! + + pec_listener -p $gen_pid -c $LISTENER_ID >lis.log & + lis_pid=$! - ROD event_generator -n $num_events -e $event \>gen_$event.log 2\>gen_$event.err + TST_CHECKPOINT_WAIT $LISTENER_ID + TST_CHECKPOINT_WAKE $GENERATOR_ID - kill -s INT $pid 2> /dev/null - wait $pid + wait $gen_pid + gen_rc=$? + wait $lis_pid lis_rc=$? - if [ ! -s gen_$event.log ]; then - tst_brk TBROK "failed to generate process events: $(cat gen_$event.err)" + if [ $gen_rc -ne 0 ]; then + tst_brk TBROK "failed to execute event_generator" fi if [ $lis_rc -ne 0 ]; then - tst_brk TBROK "failed to execute the listener: $(cat lis_$event.err)" + tst_brk TBROK "failed to execute pec_listener" fi # The listener writes the same messages as the generator, but it can
@@ -104,7 +112,7 @@ test() fd_act=$(free_fd) [ -z "$fd_act" ] && tst_brk TBROK "No free filehandle found" - eval "exec ${fd_act}<lis_$event.log" + eval "exec ${fd_act}<lis.log" failed=0 act_nevents=0
@@ -122,7 +130,7 @@ test() tst_res TFAIL "Event was not detected by the event listener: $exp" break fi - done <gen_$event.log + done <gen.log eval "exec ${fd_act}<&-"
@@ -134,7 +142,7 @@ test() fi else # TFAIL message is already printed in the loop above - cat lis_$event.log + cat lis.log fi }
testcases/kernel/connectors/pec/event_generator.c +51 -46
169 lines not on this page · raw message
testcases/kernel/connectors/pec/pec_listener.c +55 -1
101 lines not on this page · raw message
Signature · 1 line
2.25.1
PATCH 1/2 shell: Add checkpoints api for new lib
In reply to Joerg VehlowHi!
Quoted 39 lines
testcases/lib/tst_test.sh +24
-0@@ -253,6 +253,27 @@ TST_RTNL_CHK() tst_brk TBROK "$@ failed: $output" } +TST_CHECKPOINT_WAIT() +{ + ROD tst_checkpoint wait 10000 "$1" +} + +TST_CHECKPOINT_WAKE() +{ + ROD tst_checkpoint wake 10000 "$1" 1 +} + +TST_CHECKPOINT_WAKE2() +{ + ROD tst_checkpoint wake 10000 "$1" "$2" +} + +TST_CHECKPOINT_WAKE_AND_WAIT() +{ + TST_CHECKPOINT_WAKE "$1" + TST_CHECKPOINT_WAIT "$1" +} + tst_mount() { local mnt_opt mnt_err@@ -558,6 +579,20 @@ tst_set_timeout() _tst_setup_timer } +_tst_init_checkpoints() +{ + local pagesize
testcases/lib/tst_test.sh tst_set_timeout() · line 594
Quoted 10 lines
testcases/lib/tst_test.sh +10
-0+ + LTP_IPC_PATH="/dev/shm/ltp_${TCID}_$$" + pagesize=$(tst_getconf PAGESIZE) + if [ $? -ne 0 ]; then + tst_brk TBROK "tst_getconf PAGESIZE failed" + fi + ROD_SILENT dd if=/dev/zero of="$LTP_IPC_PATH" bs="$pagesize" count=1 + ROD_SILENT chmod 600 "$LTP_IPC_PATH" + export LTP_IPC_PATH +}
Shouldn't we also delete the /dev/shm/ltp_${TCID}_$$ in the _tst_do_exit() if LTP_IPC_PATH was set?
Other than that it looks fine.
Signature · 2 lines
Cyril Hrubis [email protected]
PATCH 1/2 shell: Add checkpoints api for new lib
Hi Cyril,
Quoted 16 lines · Cyril Hrubis
Quoted 4 lines
testcases/lib/tst_test.sh +3
-0+_tst_init_checkpoints() +{ + local pagesizetestcases/lib/tst_test.sh tst_set_timeout() · line 594
Quoted 10 lines
testcases/lib/tst_test.sh +10
-0+ + LTP_IPC_PATH="/dev/shm/ltp_${TCID}_$$" + pagesize=$(tst_getconf PAGESIZE) + if [ $? -ne 0 ]; then + tst_brk TBROK "tst_getconf PAGESIZE failed" + fi + ROD_SILENT dd if=/dev/zero of="$LTP_IPC_PATH" bs="$pagesize" count=1 + ROD_SILENT chmod 600 "$LTP_IPC_PATH" + export LTP_IPC_PATH +}Shouldn't we also delete the
/dev/shm/ltp_${TCID}_$$in the_tst_do_exit()ifLTP_IPC_PATHwas set?
You are right of course... I was in a tst_tmpdir mindset when implementing it, sorry.
I'll send a v2
Quoted 2 lines
Other than that it looks fine.
Joerg