hvf: Implement Apple Silicon Support
v6 cover hvf: Implement Apple Silicon Support
Now that Apple Silicon is widely available, people are obviously excited to try and run virtualized workloads on them, such as Linux and Windows.
This patch set implements a fully functional version to get the ball going on that. With this applied, I can successfully run both Linux and Windows as guests. I am not aware of any limitations specific to Hypervisor.framework apart from:
- Live migration / savevm
- gdbstub debugging (SP register)
Enjoy!
Alex
v1 -> v2:
- New patch: hvf: Actually set SIG_IPI mask
- New patch: hvf: Introduce hvf vcpu struct
- New patch: hvf: arm: Mark CPU as dirty on reset
- Removed patch: hw/arm/virt: Disable highmem when on hypervisor.framework
- Removed patch: arm: Synchronize CPU on PSCI on
- Fix build on 32bit arm
- Merge vcpu kick function patch into ARM enablement
- Implement WFI handling (allows vCPUs to sleep)
- Synchronize system registers (fixes OVMF crashes and reboot)
- Don't always call cpu_synchronize_state()
- Use more fine grained iothread locking
- Populate aa64mmfr0 from hardware
- Make safe to ctrl-C entitlement application
v2 -> v3:
- Removed patch: hvf: Actually set SIG_IPI mask
- New patch: hvf: arm: Add support for GICv3
- New patch: hvf: arm: Implement -cpu host
- Advance PC on SMC
- Use cp list interface for sysreg syncs
- Do not set current_cpu
- Fix sysreg isread mask
- Move sysreg handling to functions
- Remove WFI logic again
- Revert to global iothread locking
v3 -> v4:
- Removed patch: hvf: arm: Mark CPU as dirty on reset
- New patch: hvf: Simplify post reset/init/loadvm hooks
- Remove i386-softmmu target (meson.build for hvf target)
- Combine both if statements (PSCI)
- Use hv.h instead of Hypervisor.h for 10.15 compat
- Remove manual inclusion of Hypervisor.h in common .c files
- No longer include Hypervisor.h in arm hvf .c files
- Remove unused exe_full variable
- Reuse exe_name variable
v4 -> v5:
- Use g_free() on destroy
v5 -> v6:
- Switch SYSREG() macro order to the same as asm intrinsics
Alexander Graf (10):
hvf: Add hypervisor entitlement to output binaries
hvf: x86: Remove unused definitions
hvf: Move common code out
hvf: Introduce hvf vcpu struct
arm: Set PSCI to 0.2 for HVF
hvf: Simplify post reset/init/loadvm hooks
hvf: Add Apple Silicon support
arm: Add Hypervisor.framework build target
hvf: arm: Add support for GICv3
hvf: arm: Implement -cpu host
Peter Collingbourne (1):
arm/hvf: Add a WFI handler
MAINTAINERS | 13 + accel/hvf/entitlements.plist | 8 + accel/hvf/hvf-all.c | 54 +++ accel/hvf/hvf-cpus.c | 466 +++++++++++++++++++ accel/hvf/meson.build | 7 + accel/meson.build | 1 + include/hw/core/cpu.h | 3 +- include/sysemu/hvf.h | 2 + include/sysemu/hvf_int.h | 66 +++ meson.build | 40 +- scripts/entitlement.sh | 13 + target/arm/cpu.c | 13 +- target/arm/cpu.h | 2 + target/arm/hvf/hvf.c | 856 +++++++++++++++++++++++++++++++++++ target/arm/hvf/meson.build | 3 + target/arm/kvm_arm.h | 2 - target/arm/meson.build | 2 + target/i386/hvf/hvf-cpus.c | 131 ------ target/i386/hvf/hvf-cpus.h | 25 - target/i386/hvf/hvf-i386.h | 49 +- target/i386/hvf/hvf.c | 462 +++---------------- target/i386/hvf/meson.build | 1 - target/i386/hvf/vmx.h | 24 +- target/i386/hvf/x86.c | 28 +- target/i386/hvf/x86_descr.c | 26 +- target/i386/hvf/x86_emu.c | 62 +-- target/i386/hvf/x86_mmu.c | 4 +- target/i386/hvf/x86_task.c | 12 +- target/i386/hvf/x86hvf.c | 224 ++++----- target/i386/hvf/x86hvf.h | 2 - 30 files changed, 1786 insertions(+), 815 deletions(-) create mode 100644 accel/hvf/entitlements.plist create mode 100644 accel/hvf/hvf-all.c create mode 100644 accel/hvf/hvf-cpus.c create mode 100644 accel/hvf/meson.build create mode 100644 include/sysemu/hvf_int.h create mode 100755 scripts/entitlement.sh create mode 100644 target/arm/hvf/hvf.c create mode 100644 target/arm/hvf/meson.build delete mode 100644 target/i386/hvf/hvf-cpus.c delete mode 100644 target/i386/hvf/hvf-cpus.h
Signature · 1 line
2.24.3 (Apple Git-128)
PATCH v6 1/11 hvf: Add hypervisor entitlement to output binaries
In macOS 11, QEMU only gets access to Hypervisor.framework if it has the respective entitlement. Add an entitlement template and automatically self sign and apply the entitlement in the build.
---
v1 -> v2:
- Make safe to ctrl-C
v3 -> v4:
- Remove unused exe_full variable
- Reuse exe_name variable
--- accel/hvf/entitlements.plist | 8 ++++++++ meson.build | 29 +++++++++++++++++++++++++---- scripts/entitlement.sh | 13 +++++++++++++ 3 files changed, 46 insertions(+), 4 deletions(-) create mode 100644 accel/hvf/entitlements.plist create mode 100755 scripts/entitlement.sh
accel/hvf/entitlements.plist new file +8 -0
@@ -0,0 +1,8 @@ +<?xml version="1.0" encoding="UTF-8"?> +<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> +<plist version="1.0"> +<dict> + <key>com.apple.security.hypervisor</key> + <true/> +</dict> +</plist>
meson.build +25 -4
@@ -2146,9 +2146,14 @@ foreach target : target_dirs }] endif foreach exe: execs - emulators += {exe['name']: - executable(exe['name'], exe['sources'], - install: true, + exe_name = exe['name'] + exe_sign = 'CONFIG_HVF' in config_target + if exe_sign + exe_name += '-unsigned' + endif + + emulator = executable(exe_name, exe['sources'], + install: not exe_sign, c_args: c_args, dependencies: arch_deps + deps + exe['dependencies'], objects: lib.extract_all_objects(recursive: true),
@@ -2156,7 +2161,23 @@ foreach target : target_dirs link_depends: [block_syms, qemu_syms] + exe.get('link_depends', []), link_args: link_args, gui_app: exe['gui']) - } + + if exe_sign + emulators += {exe['name'] : custom_target(exe['name'], + install: true, + install_dir: get_option('bindir'), + depends: emulator, + output: exe['name'], + command: [ + meson.current_source_dir() / 'scripts/entitlement.sh', + meson.current_build_dir() / exe_name, + meson.current_build_dir() / exe['name'], + meson.current_source_dir() / 'accel/hvf/entitlements.plist' + ]) + } + else + emulators += {exe['name']: emulator} + endif if 'CONFIG_TRACE_SYSTEMTAP' in config_host foreach stp: [
scripts/entitlement.sh new file +13 -0
@@ -0,0 +1,13 @@ +#!/bin/sh -e +# +# Helper script for the build process to apply entitlements + +SRC="$1" +DST="$2" +ENTITLEMENT="$3" + +trap 'rm "$DST.tmp"' exit +cp -af "$SRC" "$DST.tmp" +codesign --entitlements "$ENTITLEMENT" --force -s - "$DST.tmp" +mv "$DST.tmp" "$DST" +trap '' exit
Signature · 1 line
2.24.3 (Apple Git-128)
Re: [PATCH v6 01/11] hvf: Add hypervisor entitlement to output binaries
Hi,
I use your patches when running QEMU on M1 MacBook Air.
I noticed that the installation process corrupts the code signature because meson modifies the file to fix dynamic shared library install names. Also, stripping apparently does not work because the signed file is not considered as "executable" by meson. Here is some change I wrote for my own use, just for reference:
https://github.com/akihikodaki/qemu/commit/6a9b5d7e4ea03b1e757be1eedf256871bb6a5bdd
Also, the patch series do no longer apply to master. Here is my merge with conflict resolution (It is not a rebase and was done for my own purpose. Just for reference.):
https://github.com/akihikodaki/qemu/commit/b7885e4370a2fe426e80d32afe6eb5d01a71640d
Regards,
Akihiko Odaki
Quoted 107 lines · Alexander Graf
In macOS 11, QEMU only gets access to Hypervisor.framework if it has the respective entitlement. Add an entitlement template and automatically self sign and apply the entitlement in the build.
Signed-off-by Alexander Graf <[email protected]>Reviewed-by Roman Bolshakov <[email protected]>Tested-by Roman Bolshakov <[email protected]>---
v1 -> v2:
- Make safe to ctrl-C
v3 -> v4:
- Remove unused
exe_fullvariable
- Reuseexe_namevariable--- accel/hvf/entitlements.plist | 8 ++++++++ meson.build | 29 +++++++++++++++++++++++++---- scripts/entitlement.sh | 13 +++++++++++++ 3 files changed, 46 insertions(+), 4 deletions(-)create mode 100644 accel/hvf/entitlements.plist
create mode 100755scripts/entitlement.shaccel/hvf/entitlements.plist new file +8
-0@@ -0,0 +1,8 @@ +<?xml version="1.0" encoding="UTF-8"?> +<!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd"> +<plist version="1.0"> +<dict> + <key>com.apple.security.hypervisor</key> + <true/> +</dict> +</plist>meson.build +25
-4@@ -2146,9 +2146,14 @@ foreach target : target_dirs }] endif foreach exe: execs - emulators += {exe['name']: - executable(exe['name'], exe['sources'], - install: true, + exe_name = exe['name'] + exe_sign = 'CONFIG_HVF' in config_target + if exe_sign + exe_name += '-unsigned' + endif + + emulator = executable(exe_name, exe['sources'], + install: not exe_sign, c_args: c_args, dependencies: arch_deps + deps + exe['dependencies'], objects: lib.extract_all_objects(recursive: true),@@ -2156,7 +2161,23 @@ foreach target : target_dirs link_depends: [block_syms, qemu_syms] + exe.get('link_depends', []), link_args: link_args, gui_app: exe['gui']) - } + + if exe_sign + emulators += {exe['name'] : custom_target(exe['name'], + install: true, + install_dir: get_option('bindir'), + depends: emulator, + output: exe['name'], + command: [ + meson.current_source_dir() / 'scripts/entitlement.sh', + meson.current_build_dir() / exe_name, + meson.current_build_dir() / exe['name'], + meson.current_source_dir() / 'accel/hvf/entitlements.plist' + ]) + } + else + emulators += {exe['name']: emulator} + endif if 'CONFIG_TRACE_SYSTEMTAP' in config_host foreach stp: [scripts/entitlement.sh new file +13
-0@@ -0,0 +1,13 @@ +#!/bin/sh -e +# +# Helper script for the build process to apply entitlements + +SRC="$1" +DST="$2" +ENTITLEMENT="$3" + +trap 'rm "$DST.tmp"' exit +cp -af "$SRC" "$DST.tmp" +codesign --entitlements "$ENTITLEMENT" --force -s - "$DST.tmp" +mv "$DST.tmp" "$DST" +trap '' exit
Re: [PATCH v6 01/11] hvf: Add hypervisor entitlement to output binaries
Quoted 4 lines · Akihiko Odaki
I noticed that the installation process corrupts the code signature because meson modifies the file to fix dynamic shared library install names. Also, stripping apparently does not work because the signed file is not considered as "executable" by meson. Here is some change I wrote for my own use, just for reference:
https://github.com/akihikodaki/qemu/commit/6a9b5d7e4ea03b1e757be1eedf256871bb6a5bdd
That seems like a feasible way to do it. We could also have a single script with --build and --install as the first argument.
Since entitlement support is already part of the upstream tree, would you like to submit the patch and Cc me so that I can include it?
Thanks,
Paolo
PATCH 1/1 hvf: Sign the code after installation
Before this change, the code signed during the build was installed directly.
However, the signature gets invalidated because meson modifies the code to fix dynamic library install names during the install process.
It also prevents meson to strip the code because the pre-signed file is not marked as an executable (although it is somehow able to perform the modification described above).
With this change, the unsigned code will be installed and modified by meson first, and a script signs it later.
---
meson.build | 11 +++++++----
scripts/{entitlement.sh => entitlement/build.sh} | 0
scripts/entitlement/install.sh | 11 +++++++++++
3 files changed, 18 insertions(+), 4 deletions(-)
rename scripts/{entitlement.sh => entitlement/build.sh} (100%)
create mode 100755 scripts/entitlement/install.shmeson.build +7 -4
@@ -2224,7 +2224,7 @@ foreach target : target_dirs endif emulator = executable(exe_name, exe['sources'], - install: not exe_sign, + install: true, c_args: c_args, dependencies: arch_deps + deps + exe['dependencies'], objects: lib.extract_all_objects(recursive: true),
@@ -2235,17 +2235,20 @@ foreach target : target_dirs if exe_sign emulators += {exe['name'] : custom_target(exe['name'], - install: true, - install_dir: get_option('bindir'), depends: emulator, output: exe['name'], command: [ - meson.current_source_dir() / 'scripts/entitlement.sh', + meson.current_source_dir() / 'scripts/entitlement/build.sh', meson.current_build_dir() / exe_name, meson.current_build_dir() / exe['name'], meson.current_source_dir() / 'accel/hvf/entitlements.plist' ]) } + + meson.add_install_script('scripts/entitlement/install.sh', + get_option('bindir') / exe_name, + get_option('bindir') / exe['name'], + meson.current_source_dir() / 'accel/hvf/entitlements.plist') else emulators += {exe['name']: emulator} endif
scripts/entitlement/build.sh renamed from scripts/entitlement.sh +0 -0
scripts/entitlement/install.sh new file +11 -0
@@ -0,0 +1,11 @@ +#!/bin/sh -e +# +# Helper script for the install process to apply entitlements + +SRC="$1" +DST="$2" +ENTITLEMENT="$3" + +cd "$MESON_INSTALL_DESTDIR_PREFIX" +mv -f "$SRC" "$DST" +codesign --entitlements "$ENTITLEMENT" --force -s - "$DST"
Signature · 1 line
2.24.3 (Apple Git-128)
Re: [PATCH] hvf: Sign the code after installation
Quoted 6 lines · Akihiko Odaki
Before this change, the code signed during the build was installed directly.
However, the signature gets invalidated because meson modifies the code to fix dynamic library install names during the install process.
Quoted 8 lines
It also prevents meson to strip the code because the pre-signed file is not marked as an executable (although it is somehow able to perform the modification described above).
With this change, the unsigned code will be installed and modified by meson first, and a script signs it later.
Signed-off-by Akihiko Odaki <[email protected]>
Thanks very much! As mentioned in the other message, I would prefer to have a single script so here is what I came up with.
#!/bin/sh -e
#
# Helper script for the build process to apply entitlements
copy=:
if [ "$1" = --install ]; then
shift
copy=false
cd "$MESON_INSTALL_DESTDIR_PREFIX"
fi
SRC="$1"
DST="$2"
ENTITLEMENT="$3"
if $copy; then
trap 'rm "$DST.tmp"' exit
cp -af "$SRC" "$DST.tmp"
SRC="$DST.tmp"
fi
codesign --entitlements "$ENTITLEMENT" --force -s - "$SRC" mv -f "$SRC" "$DST"
trap '' exit
I'll include this in the next pull request, since I was able to test it with Cirrus CI.
Thanks,
Paolo
Re: [PATCH] hvf: Sign the code after installation
2021年2月25日(木) 22:48 Paolo Bonzini <[email protected]>:
Quoted 46 lines · Akihiko Odaki
Quoted 6 lines
Before this change, the code signed during the build was installed directly.
However, the signature gets invalidated because meson modifies the code to fix dynamic library install names during the install process.
Quoted 8 lines
It also prevents meson to strip the code because the pre-signed file is not marked as an executable (although it is somehow able to perform the modification described above).
With this change, the unsigned code will be installed and modified by meson first, and a script signs it later.
Signed-off-by Akihiko Odaki <[email protected]>Thanks very much! As mentioned in the other message, I would prefer to have a single script so here is what I came up with.
#!/bin/sh -e
#
# Helper script for the build process to apply entitlementscopy=:
if [ "$1" = --install ]; then
shift
copy=false
cd "$MESON_INSTALL_DESTDIR_PREFIX"
fiSRC="$1"
DST="$2"
ENTITLEMENT="$3"if $copy; then
trap 'rm "$DST.tmp"' exit
cp -af "$SRC" "$DST.tmp"
SRC="$DST.tmp"
ficodesign --entitlements "$ENTITLEMENT" --force -s - "$SRC" mv -f "$SRC" "$DST"
trap '' exit
Quoted 7 lines
I'll include this in the next pull request, since I was able to test it with Cirrus CI.
Thanks,
Paolo
I wonder what happens if codesign fails when modifying "$SRC" during installation. The half-modified binary is still at "$SRC" and mtime is newer than the binary in the build directory, so meson given --only-changed may think it is "not changed" and leave it corrupted. "mv" should be performed earlier to avoid such a case.
It is kind of theoretical and *very* unlikely to happen anyway, so it is fine for me to include it. Anything else looks good for me and should solve the problem nicely.
Thanks,
Akihiko Odaki
PATCH v6 2/11 hvf: x86: Remove unused definitions
In reply to Alexander GrafThe hvf i386 has a few struct and cpp definitions that are never used. Remove them.
--- target/i386/hvf/hvf-i386.h | 16 ---------------- 1 file changed, 16 deletions(-)
target/i386/hvf/hvf-i386.h +0 -16
@@ -21,21 +21,6 @@#include "cpu.h" #include "x86.h" -#define HVF_MAX_VCPU 0x10 - -extern struct hvf_state hvf_global; - -struct hvf_vm { -int id; -struct hvf_vcpu_state *vcpus[HVF_MAX_VCPU ]; -}; - -struct hvf_state { -uint32_t version; -struct hvf_vm *vm; -uint64_t mem_quota; -}; -/* hvf_slot flags */ #define HVF_SLOT_LOG (1 << 0)
@@ -75,7 +60,6 @@ hvf_slot *hvf_find_overlap_slot(uint64_t, uint64_t);/* Host specific functions */ int hvf_inject_interrupt (CPUArchState *env,int vector); -int hvf_vcpu_run (struct hvf_vcpu_state *vcpu);#endif #endif
Signature · 1 line
2.24.3 (Apple Git-128)
Re: [PATCH v6 02/11] hvf: x86: Remove unused definitions
Quoted 10 lines · Alexander Graf
The hvf i386 has a few struct and cpp definitions that are never used. Remove them.
Suggested-by Roman Bolshakov <[email protected]>Signed-off-by Alexander Graf <[email protected]>Reviewed-by Roman Bolshakov <[email protected]>Tested-by Roman Bolshakov <[email protected]>--- target/i386/hvf/hvf-i386.h | 16 ---------------- 1 file changed, 16 deletions(-)
Roman Bolshakov
AppliedRe: [PATCH v6 02/11] hvf: x86: Remove unused definitions
In reply to Alexander GrafQuoted 8 lines · Alexander Graf
The hvf i386 has a few struct and cpp definitions that are never used. Remove them.
Suggested-by Roman Bolshakov <[email protected]>Signed-off-by Alexander Graf <[email protected]>Reviewed-by Roman Bolshakov <[email protected]>Tested-by Roman Bolshakov <[email protected]>---
Queued, thanks!
-Roman
PATCH v6 3/11 hvf: Move common code out
In reply to Alexander GrafUntil now, Hypervisor.framework has only been available on x86_64 systems. With Apple Silicon shipping now, it extends its reach to aarch64. To prepare for support for multiple architectures, let's move common code out into its own accel directory.
---
v3 -> v4:
- Use hv.h instead of Hypervisor.h for 10.15 compat
- Remove manual inclusion of Hypervisor.h in common .c files
--- MAINTAINERS | 8 + accel/hvf/hvf-all.c | 54 +++++ accel/hvf/hvf-cpus.c | 462 ++++++++++++++++++++++++++++++++++++ accel/hvf/meson.build | 7 + accel/meson.build | 1 + include/sysemu/hvf_int.h | 54 +++++ target/i386/hvf/hvf-cpus.c | 131 ---------- target/i386/hvf/hvf-cpus.h | 25 -- target/i386/hvf/hvf-i386.h | 33 +-- target/i386/hvf/hvf.c | 360 +--------------------------- target/i386/hvf/meson.build | 1 - target/i386/hvf/x86hvf.c | 11 +- target/i386/hvf/x86hvf.h | 2 - 13 files changed, 596 insertions(+), 553 deletions(-) create mode 100644 accel/hvf/hvf-all.c create mode 100644 accel/hvf/hvf-cpus.c create mode 100644 accel/hvf/meson.build create mode 100644 include/sysemu/hvf_int.h delete mode 100644 target/i386/hvf/hvf-cpus.c delete mode 100644 target/i386/hvf/hvf-cpus.h
MAINTAINERS +8 -0
@@ -448,7 +448,15 @@ M: Roman Bolshakov <[email protected]> W: https://wiki.qemu.org/Features/HVF S: Maintained F: target/i386/hvf/ + +HVF +M: Cameron Esfahani <[email protected]> +M: Roman Bolshakov <[email protected]> +W: https://wiki.qemu.org/Features/HVF +S: Maintained +F: accel/hvf/ F: include/sysemu/hvf.h +F: include/sysemu/hvf_int.h WHPX CPUs M: Sunil Muthuswamy <[email protected]>
accel/hvf/hvf-all.c new file +54 -0
54 lines not on this page · raw message
accel/hvf/hvf-cpus.c new file +462 -0
462 lines not on this page · raw message
accel/hvf/meson.build new file +7 -0
@@ -0,0 +1,7 @@ +hvf_ss = ss.source_set() +hvf_ss.add(files( + 'hvf-all.c', + 'hvf-cpus.c', +)) + +specific_ss.add_all(when: 'CONFIG_HVF', if_true: hvf_ss)
accel/meson.build +1 -0
@@ -1,5 +1,6 @@ softmmu_ss.add(files('accel.c')) +subdir('hvf') subdir('qtest') subdir('kvm') subdir('tcg')
include/sysemu/hvf_int.h new file +54 -0
54 lines not on this page · raw message
target/i386/hvf/hvf-cpus.c deleted +0 -131
131 lines not on this page · raw message
target/i386/hvf/hvf-cpus.h deleted +0 -25
@@ -1,25 +0,0 @@ -/* -* Accelerator CPUS Interface -* -* Copyright 2020 SUSE LLC -* -* This work is licensed under the terms of the GNU GPL, version 2 or later. -* See the COPYING file in the top-level directory. -*/ - -#ifndef HVF_CPUS_H -#define HVF_CPUS_H - -#include "sysemu/cpus.h" - -extern const CpusAccel hvf_cpus; - -int hvf_init_vcpu (CPUState *); -int hvf_vcpu_exec (CPUState *); -void hvf_cpu_synchronize_state (CPUState *); -void hvf_cpu_synchronize_post_reset (CPUState *); -void hvf_cpu_synchronize_post_init (CPUState *); -void hvf_cpu_synchronize_pre_loadvm (CPUState *); -void hvf_vcpu_destroy (CPUState *); - -#endif /* HVF_CPUS_H */
target/i386/hvf/hvf-i386.h +1 -32
@@ -18,42 +18,11 @@#include "sysemu/accel.h" #include "sysemu/hvf.h" +#include "sysemu/hvf_int.h" #include "cpu.h" #include "x86.h" -/* hvf_slot flags */ -#define HVF_SLOT_LOG (1 << 0) - -typedef struct hvf_slot { -uint64_t start; -uint64_t size; -uint8_t *mem; -int slot_id; -uint32_t flags; -MemoryRegion *region; -}hvf_slot ; - -typedef struct hvf_vcpu_caps { -uint64_t vmx_cap_pinbased; -uint64_t vmx_cap_procbased; -uint64_t vmx_cap_procbased2; -uint64_t vmx_cap_entry; -uint64_t vmx_cap_exit; -uint64_t vmx_cap_preemption_timer; -}hvf_vcpu_caps ; - -struct HVFState { -AccelState parent; -hvf_slot slots[32 ]; -int num_slots; - -hvf_vcpu_caps *hvf_caps; -}; -extern HVFState *hvf_state; - -void hvf_set_phys_mem (MemoryRegionSection *,bool );void hvf_handle_io (CPUArchState *,uint16_t ,void *,int ,int ,int ); -hvf_slot *hvf_find_overlap_slot (uint64_t ,uint64_t );#ifdef NEED_CPU_H /* Functions exported to host specific mode */
target/i386/hvf/hvf.c +3 -357
404 lines not on this page · raw message
target/i386/hvf/meson.build +0 -1
@@ -1,6 +1,5 @@ i386_softmmu_ss.add(when: [hvf, 'CONFIG_HVF'], if_true: files( 'hvf.c', - 'hvf-cpus.c', 'x86.c', 'x86_cpuid.c', 'x86_decode.c',
target/i386/hvf/x86hvf.c +6 -5
@@ -20,6 +20,9 @@#include "qemu/osdep.h" #include "qemu-common.h" +#include "sysemu/hvf.h" +#include "sysemu/hvf_int.h" +#include "sysemu/hw_accel.h" #include "x86hvf.h" #include "vmx.h" #include "vmcs.h"
@@ -32,8 +35,6 @@#include <Hypervisor/hv.h> #include <Hypervisor/hv_vmx.h> -#include "hvf-cpus.h" -void hvf_set_segment (struct CPUState *cpu,struct vmx_segment *vmx_seg,SegmentCache *qseg,bool is_tr) {
@@ -437,7 +438,7 @@ int hvf_process_events(CPUState *cpu_state) env->eflags =rreg (cpu_state->hvf_fd,HV_X86_RFLAGS );if (cpu_state->interrupt_request &CPU_INTERRUPT_INIT ) { -hvf_cpu_synchronize_state (cpu_state); +cpu_synchronize_state (cpu_state);do_cpu_init (cpu); }
@@ -451,12 +452,12 @@ int hvf_process_events(CPUState *cpu_state) cpu_state->halted =0 ; }if (cpu_state->interrupt_request &CPU_INTERRUPT_SIPI ) { -hvf_cpu_synchronize_state (cpu_state); +cpu_synchronize_state (cpu_state);do_cpu_sipi (cpu); }if (cpu_state->interrupt_request &CPU_INTERRUPT_TPR ) { cpu_state->interrupt_request &= ~CPU_INTERRUPT_TPR ; -hvf_cpu_synchronize_state (cpu_state); +cpu_synchronize_state (cpu_state);apic_handle_tpr_access_report (cpu->apic_state, env->eip, env->tpr_access_type); }
target/i386/hvf/x86hvf.h +0 -2
@@ -21,8 +21,6 @@#include "x86_descr.h" int hvf_process_events (CPUState *); -int hvf_put_registers (CPUState *); -int hvf_get_registers (CPUState *);bool hvf_inject_interrupts (CPUState *);void hvf_set_segment (struct CPUState *cpu,struct vmx_segment *vmx_seg,SegmentCache *qseg,bool is_tr);
Signature · 1 line
2.24.3 (Apple Git-128)
Re: [PATCH v6 03/11] hvf: Move common code out
Hi Alexander,
Quoted 63 lines · Alexander Graf
Until now, Hypervisor.framework has only been available on
x86_64systems. With Apple Silicon shipping now, it extends its reach to aarch64. To prepare for support for multiple architectures, let's move common code out into its own accel directory.Signed-off-by Alexander Graf <[email protected]>Reviewed-by Roman Bolshakov <[email protected]>Tested-by Roman Bolshakov <[email protected]>---
v3 -> v4:
- Use
hv.hinstead ofHypervisor.hfor 10.15 compat
- Remove manual inclusion ofHypervisor.hin common .c files--- MAINTAINERS | 8 + accel/hvf/hvf-all.c | 54 +++++ accel/hvf/hvf-cpus.c | 462 ++++++++++++++++++++++++++++++++++++ accel/hvf/meson.build | 7 + accel/meson.build | 1 + include/sysemu/hvf_int.h | 54 +++++ target/i386/hvf/hvf-cpus.c | 131 ---------- target/i386/hvf/hvf-cpus.h | 25 -- target/i386/hvf/hvf-i386.h | 33 +-- target/i386/hvf/hvf.c | 360 +--------------------------- target/i386/hvf/meson.build | 1 - target/i386/hvf/x86hvf.c | 11 +- target/i386/hvf/x86hvf.h | 2 - 13 files changed, 596 insertions(+), 553 deletions(-) create mode 100644 accel/hvf/hvf-all.c create mode 100644 accel/hvf/hvf-cpus.c create mode 100644 accel/hvf/meson.build create mode 100644 include/sysemu/hvf_int.h delete mode 100644 target/i386/hvf/hvf-cpus.c delete mode 100644 target/i386/hvf/hvf-cpus.hMAINTAINERS +8
-0@@ -448,7 +448,15 @@ M: Roman Bolshakov <[email protected]> W: https://wiki.qemu.org/Features/HVF S: Maintained F: target/i386/hvf/ + +HVF +M: Cameron Esfahani <[email protected]> +M: Roman Bolshakov <[email protected]> +W: https://wiki.qemu.org/Features/HVF +S: Maintained +F: accel/hvf/ F: include/sysemu/hvf.h +F: include/sysemu/hvf_int.h WHPX CPUs M: Sunil Muthuswamy <[email protected]>accel/hvf/hvf-all.c new file +0
-0
accel/hvf/hvf-all.c line 8
Quoted 8 lines
accel/hvf/hvf-all.c new file +8
-0@@ -0,0 +1,54 @@ +/* +* QEMU Hypervisor.framework support +* +* This work is licensed under the terms of the GNU GPL, version 2. See +* the COPYING file in the top-level directory. +* +* Contributions after 2012-01-13 are licensed under the terms of the +* GNU GPL, version 2 or (at your option) any later version.
Maybe start with GPLv2+ directly?
Quoted 6 lines
include/sysemu/hvf_int.h new file +0
-0
include/sysemu/hvf_int.h line 9
Quoted 9 lines
include/sysemu/hvf_int.h new file +9
-0@@ -0,0 +1,54 @@ +/* +* QEMU Hypervisor.framework (HVF) support +* +* This work is licensed under the terms of the GNU GPL, version 2 or later. +* See the COPYING file in the top-level directory. +* +*/ + +/* header to be included in HVF-specific code */
Can we have this header local to accel/hvf/ ?
Otherwise:
Quoted 45 lines
include/sysemu/hvf_int.h new file +45
-0+ +#ifndef HVF_INT_H +#define HVF_INT_H + +#include <Hypervisor/hv.h> + +/* hvf_slot flags */ +#define HVF_SLOT_LOG (1 << 0) + +typedef struct hvf_slot { +uint64_t start; +uint64_t size; +uint8_t *mem; +int slot_id; +uint32_t flags; +MemoryRegion *region; +}hvf_slot ; + +typedef struct hvf_vcpu_caps { +uint64_t vmx_cap_pinbased; +uint64_t vmx_cap_procbased; +uint64_t vmx_cap_procbased2; +uint64_t vmx_cap_entry; +uint64_t vmx_cap_exit; +uint64_t vmx_cap_preemption_timer; +}hvf_vcpu_caps ; + +struct HVFState { +AccelState parent; +hvf_slot slots[32 ]; +int num_slots; + +hvf_vcpu_caps *hvf_caps; +}; +extern HVFState *hvf_state; + +void assert_hvf_ok (hv_return_t ret); +int hvf_get_registers (CPUState *cpu); +int hvf_put_registers (CPUState *cpu); +int hvf_arch_init_vcpu (CPUState *cpu); +void hvf_arch_vcpu_destroy (CPUState *cpu); +int hvf_vcpu_exec (CPUState *cpu); +hvf_slot *hvf_find_overlap_slot (uint64_t ,uint64_t ); + +#endif
Re: [PATCH v6 03/11] hvf: Move common code out
Quoted 67 lines · Philippe Mathieu-Daudé
Hi Alexander,
Quoted 64 lines · Alexander Graf
Until now, Hypervisor.framework has only been available on
x86_64systems. With Apple Silicon shipping now, it extends its reach to aarch64. To prepare for support for multiple architectures, let's move common code out into its own accel directory.Signed-off-by Alexander Graf <[email protected]>Reviewed-by Roman Bolshakov <[email protected]>Tested-by Roman Bolshakov <[email protected]>---
v3 -> v4:
- Use
hv.hinstead ofHypervisor.hfor 10.15 compat
- Remove manual inclusion ofHypervisor.hin common .c files--- MAINTAINERS | 8 + accel/hvf/hvf-all.c | 54 +++++ accel/hvf/hvf-cpus.c | 462 ++++++++++++++++++++++++++++++++++++ accel/hvf/meson.build | 7 + accel/meson.build | 1 + include/sysemu/hvf_int.h | 54 +++++ target/i386/hvf/hvf-cpus.c | 131 ---------- target/i386/hvf/hvf-cpus.h | 25 -- target/i386/hvf/hvf-i386.h | 33 +-- target/i386/hvf/hvf.c | 360 +--------------------------- target/i386/hvf/meson.build | 1 - target/i386/hvf/x86hvf.c | 11 +- target/i386/hvf/x86hvf.h | 2 - 13 files changed, 596 insertions(+), 553 deletions(-) create mode 100644 accel/hvf/hvf-all.c create mode 100644 accel/hvf/hvf-cpus.c create mode 100644 accel/hvf/meson.build create mode 100644 include/sysemu/hvf_int.h delete mode 100644 target/i386/hvf/hvf-cpus.c delete mode 100644 target/i386/hvf/hvf-cpus.hMAINTAINERS +8
-0@@ -448,7 +448,15 @@ M: Roman Bolshakov <[email protected]> W: https://wiki.qemu.org/Features/HVF S: Maintained F: target/i386/hvf/ + +HVF +M: Cameron Esfahani <[email protected]> +M: Roman Bolshakov <[email protected]> +W: https://wiki.qemu.org/Features/HVF +S: Maintained +F: accel/hvf/ F: include/sysemu/hvf.h +F: include/sysemu/hvf_int.h WHPX CPUs M: Sunil Muthuswamy <[email protected]>accel/hvf/hvf-all.c new file +1
-0@@ -0,0 +1,54 @@ +/*
Quoted 8 lines
accel/hvf/hvf-all.c line 8
Quoted 7 lines
accel/hvf/hvf-all.c new file +7
-0+* QEMU Hypervisor.framework support +* +* This work is licensed under the terms of the GNU GPL, version 2. See +* the COPYING file in the top-level directory. +* +* Contributions after 2012-01-13 are licensed under the terms of the +* GNU GPL, version 2 or (at your option) any later version. Maybe start with GPLv2+ directly?
I'd prefer to leave the license clause in here, because I'm not touching any of the code, only moving it.
Quoted 17 lines
Quoted 7 lines
include/sysemu/hvf_int.h new file +0
-0include/sysemu/hvf_int.h line 9
Quoted 9 lines
include/sysemu/hvf_int.h new file +9
-0@@ -0,0 +1,54 @@ +/* +* QEMU Hypervisor.framework (HVF) support +* +* This work is licensed under the terms of the GNU GPL, version 2 or later. +* See the COPYING file in the top-level directory. +* +*/ + +/* header to be included in HVF-specific code */ Can we have this header local to accel/hvf/ ?
At the end of the patch set, the list of files using the header is not limited to accel/hvf:
MacBook-Air:qemu alex$ git grep hvf_int.h MAINTAINERS:F: include/sysemu/hvf_int.h accel/hvf/hvf-accel-ops.c:#include "sysemu/hvf_int.h" accel/hvf/hvf-all.c:#include "sysemu/hvf_int.h" target/arm/hvf/hvf.c:#include "sysemu/hvf_int.h" target/i386/hvf/hvf-i386.h:#include "sysemu/hvf_int.h" target/i386/hvf/hvf.c:#include "sysemu/hvf_int.h" target/i386/hvf/vmx.h:#include "sysemu/hvf_int.h"
It also aligns with KVM's use of kvm_int.h, no? Overall, I'm not sure putting it into the accel directory will buy us too much, I'm happy to be convinced otherwise though.
Quoted 2 lines
Otherwise:
Reviewed-by Philippe Mathieu-Daudé <[email protected]>
Thanks :)
Alex
Re: [PATCH v6 03/11] hvf: Move common code out
In reply to Alexander GrafQuoted 9 lines · Alexander Graf
Until now, Hypervisor.framework has only been available on
x86_64systems. With Apple Silicon shipping now, it extends its reach to aarch64. To prepare for support for multiple architectures, let's move common code out into its own accel directory.Signed-off-by Alexander Graf <[email protected]>Reviewed-by Roman Bolshakov <[email protected]>Tested-by Roman Bolshakov <[email protected]>
I was expecting this all to be pretty much pure code-motion, but it isn't. Examples:
Quoted 13 lines
accel/hvf/hvf-cpus.c new file +13
-0+static int do_hvf_set_memory (hvf_slot *slot,hv_memory_flags_t flags) +{ +struct mac_slot *macslot; +hv_return_t ret; + + macslot = &mac_slots[slot->slot_id]; + +if (macslot->present) { +if (macslot->size != slot->size) { + macslot->present =0 ; + ret =hv_vm_unmap (macslot->gpa_start, macslot->size); +assert_hvf_ok (ret); + }
accel/hvf/hvf-cpus.c line 108
Quoted 10 lines
accel/hvf/hvf-cpus.c new file +10
-0+ } + +if (!slot->size) { +return 0 ; + } + + macslot->present =1 ; + macslot->gpa_start = slot->start; + macslot->size = slot->size; + ret =hv_vm_map (slot->mem, slot->start, slot->size, flags);
In the old code this line is
- ret = hv_vm_map((hv_uvaddr_t)slot->mem, slot->start, slot->size, flags);
Quoted 8 lines
accel/hvf/hvf-cpus.c new file +6
-0+assert_hvf_ok (ret); +return 0 ; +} +static void hvf_set_dirty_tracking (MemoryRegionSection *section,bool on) +{ +hvf_slot *slot;
accel/hvf/hvf-cpus.c line 203
Quoted 10 lines
accel/hvf/hvf-cpus.c new file +10
-0+ + slot =hvf_find_overlap_slot ( + section->offset_within_address_space, +int128_get64 (section->size)); + +/* protect region against writes; begin tracking it */ +if (on) { + slot->flags |=HVF_SLOT_LOG ; +hv_vm_protect ((uintptr_t )slot->start, (size_t )slot->size, +HV_MEMORY_READ );
The casts here were different in the old code:
- hv_vm_protect((hv_gpaddr_t)slot->start, (size_t)slot->size,
- HV_MEMORY_READ);
And these changes look like they ought to be in a different patch:
Quoted 17 lines
void hvf_set_segment(struct CPUState *cpu, struct
vmx_segment*vmx_seg,
SegmentCache *qseg, boolis_tr)
{target/i386/hvf/x86hvf.c +1
-2@@ -437,7 +438,7 @@ int hvf_process_events(CPUState *cpu_state) env->eflags =rreg (cpu_state->hvf_fd,HV_X86_RFLAGS );if (cpu_state->interrupt_request &CPU_INTERRUPT_INIT ) { -hvf_cpu_synchronize_state (cpu_state); +cpu_synchronize_state (cpu_state);do_cpu_init (cpu); }@@ -451,12 +452,12 @@ int hvf_process_events(CPUState *cpu_state) cpu_state->halted =0 ; }if (cpu_state->interrupt_request &CPU_INTERRUPT_SIPI ) { -hvf_cpu_synchronize_state (cpu_state);
target/i386/hvf/x86hvf.c int hvf_process_events(CPUState *cpu_state) · line 463
Quoted 10 lines
target/i386/hvf/x86hvf.c +2
-1+cpu_synchronize_state (cpu_state);do_cpu_sipi (cpu); }if (cpu_state->interrupt_request &CPU_INTERRUPT_TPR ) { cpu_state->interrupt_request &= ~CPU_INTERRUPT_TPR ; -hvf_cpu_synchronize_state (cpu_state); +cpu_synchronize_state (cpu_state);apic_handle_tpr_access_report (cpu->apic_state, env->eip, env->tpr_access_type); }
Could you go through and make sure that as much of possible of this patch is pure "cut from file A and paste into file B", please? The git diff --color-moved option is really helpful for
this: the aim should be for the patch as much as possible to be the blues, yellows and purples of "this code just moved" and as few as possible lines of green/red "this code is deleted or added". (In some places it might be helpful to split parts of this change into separate patches, eg if you want to make a function 'static' when it was unnecessarily global before.)
thanks
-- PMM
PATCH v6 4/11 hvf: Introduce hvf vcpu struct
In reply to Alexander GrafWe will need more than a single field for hvf going forward. To keep the global vcpu struct uncluttered, let's allocate a special hvf vcpu struct, similar to how hax does it.
---
v4 -> v5:
- Use g_free() on destroy
--- accel/hvf/hvf-cpus.c | 8 +- include/hw/core/cpu.h | 3 +- include/sysemu/hvf_int.h | 4 + target/i386/hvf/hvf.c | 102 +++++++++--------- target/i386/hvf/vmx.h | 24 +++-- target/i386/hvf/x86.c | 28 ++--- target/i386/hvf/x86_descr.c | 26 ++--- target/i386/hvf/x86_emu.c | 62 +++++------ target/i386/hvf/x86_mmu.c | 4 +- target/i386/hvf/x86_task.c | 12 +-- target/i386/hvf/x86hvf.c | 210 ++++++++++++++++++------------------ 11 files changed, 247 insertions(+), 236 deletions(-)
accel/hvf/hvf-cpus.c +6 -2
@@ -312,10 +312,12 @@ static void hvf_cpu_synchronize_pre_loadvm(CPUState *cpu)static void hvf_vcpu_destroy (CPUState *cpu) { -hv_return_t ret =hv_vcpu_destroy (cpu->hvf_fd); +hv_return_t ret =hv_vcpu_destroy (cpu->hvf->fd);assert_hvf_ok (ret);hvf_arch_vcpu_destroy (cpu); +g_free (cpu->hvf); + cpu->hvf =NULL ; }static void dummy_signal (int sig)
@@ -326,6 +328,8 @@ static int hvf_init_vcpu(CPUState *cpu) {int r; + cpu->hvf =g_malloc0 (sizeof (*cpu->hvf)); +/* init cpu signals */ sigset_t set;struct sigaction sigact;
@@ -337,7 +341,7 @@ static int hvf_init_vcpu(CPUState *cpu)pthread_sigmask (SIG_BLOCK ,NULL , &set);sigdelset (&set,SIG_IPI ); - r =hv_vcpu_create ((hv_vcpuid_t *)&cpu->hvf_fd,HV_VCPU_DEFAULT ); + r =hv_vcpu_create ((hv_vcpuid_t *)&cpu->hvf->fd,HV_VCPU_DEFAULT ); cpu->vcpu_dirty =1 ;assert_hvf_ok (r);
include/hw/core/cpu.h +2 -1
@@ -281,6 +281,7 @@ struct KVMState;struct kvm_run ;struct hax_vcpu_state ; +struct hvf_vcpu_state ;#define TB_JMP_CACHE_BITS 12#define TB_JMP_CACHE_SIZE (1 << TB_JMP_CACHE_BITS)
@@ -464,7 +465,7 @@ struct CPUState {struct hax_vcpu_state *hax_vcpu; -int hvf_fd; +struct hvf_vcpu_state *hvf;/* track IOMMUs whose translations we've cached in the TCG TLB */ GArray *iommu_notifiers;
include/sysemu/hvf_int.h +4 -0
@@ -43,6 +43,10 @@ struct HVFState { };extern HVFState *hvf_state; +struct hvf_vcpu_state { +int fd; +}; +void assert_hvf_ok (hv_return_t ret);int hvf_get_registers (CPUState *cpu);int hvf_put_registers (CPUState *cpu);
target/i386/hvf/hvf.c +51 -51
221 lines not on this page · raw message
target/i386/hvf/vmx.h +13 -11
@@ -30,6 +30,8 @@#include "vmcs.h" #include "cpu.h" #include "x86.h" +#include "sysemu/hvf.h" +#include "sysemu/hvf_int.h" #include "exec/address-spaces.h"
@@ -179,15 +181,15 @@ static inline void macvm_set_rip(CPUState *cpu, uint64_t rip)uint64_t val;/* BUG, should take considering overlap.. */ -wreg (cpu->hvf_fd,HV_X86_RIP , rip); +wreg (cpu->hvf->fd,HV_X86_RIP , rip); env->eip = rip;/* after moving forward in rip, we need to clean INTERRUPTABILITY */ - val =rvmcs (cpu->hvf_fd,VMCS_GUEST_INTERRUPTIBILITY ); + val =rvmcs (cpu->hvf->fd,VMCS_GUEST_INTERRUPTIBILITY );if (val & (VMCS_INTERRUPTIBILITY_STI_BLOCKING |VMCS_INTERRUPTIBILITY_MOVSS_BLOCKING )) { env->hflags &= ~HF_INHIBIT_IRQ_MASK ; -wvmcs (cpu->hvf_fd,VMCS_GUEST_INTERRUPTIBILITY , +wvmcs (cpu->hvf->fd,VMCS_GUEST_INTERRUPTIBILITY , val & ~(VMCS_INTERRUPTIBILITY_STI_BLOCKING |VMCS_INTERRUPTIBILITY_MOVSS_BLOCKING )); }
@@ -199,9 +201,9 @@ static inline void vmx_clear_nmi_blocking(CPUState *cpu)CPUX86State *env = &x86_cpu->env; env->hflags2 &= ~HF2_NMI_MASK ; -uint32_t gi = (uint32_t )rvmcs (cpu->hvf_fd,VMCS_GUEST_INTERRUPTIBILITY ); +uint32_t gi = (uint32_t )rvmcs (cpu->hvf->fd,VMCS_GUEST_INTERRUPTIBILITY ); gi &= ~VMCS_INTERRUPTIBILITY_NMI_BLOCKING ; -wvmcs (cpu->hvf_fd,VMCS_GUEST_INTERRUPTIBILITY , gi); +wvmcs (cpu->hvf->fd,VMCS_GUEST_INTERRUPTIBILITY , gi); }static inline void vmx_set_nmi_blocking (CPUState *cpu)
@@ -210,16 +212,16 @@ static inline void vmx_set_nmi_blocking(CPUState *cpu)CPUX86State *env = &x86_cpu->env; env->hflags2 |=HF2_NMI_MASK ; -uint32_t gi = (uint32_t )rvmcs (cpu->hvf_fd,VMCS_GUEST_INTERRUPTIBILITY ); +uint32_t gi = (uint32_t )rvmcs (cpu->hvf->fd,VMCS_GUEST_INTERRUPTIBILITY ); gi |=VMCS_INTERRUPTIBILITY_NMI_BLOCKING ; -wvmcs (cpu->hvf_fd,VMCS_GUEST_INTERRUPTIBILITY , gi); +wvmcs (cpu->hvf->fd,VMCS_GUEST_INTERRUPTIBILITY , gi); }static inline void vmx_set_nmi_window_exiting (CPUState *cpu) {uint64_t val; - val =rvmcs (cpu->hvf_fd,VMCS_PRI_PROC_BASED_CTLS ); -wvmcs (cpu->hvf_fd,VMCS_PRI_PROC_BASED_CTLS , val | + val =rvmcs (cpu->hvf->fd,VMCS_PRI_PROC_BASED_CTLS ); +wvmcs (cpu->hvf->fd,VMCS_PRI_PROC_BASED_CTLS , val |VMCS_PRI_PROC_BASED_CTLS_NMI_WINDOW_EXITING ); }
@@ -228,8 +230,8 @@ static inline void vmx_clear_nmi_window_exiting(CPUState *cpu) {uint64_t val; - val =rvmcs (cpu->hvf_fd,VMCS_PRI_PROC_BASED_CTLS ); -wvmcs (cpu->hvf_fd,VMCS_PRI_PROC_BASED_CTLS , val & + val =rvmcs (cpu->hvf->fd,VMCS_PRI_PROC_BASED_CTLS ); +wvmcs (cpu->hvf->fd,VMCS_PRI_PROC_BASED_CTLS , val & ~VMCS_PRI_PROC_BASED_CTLS_NMI_WINDOW_EXITING ); }
target/i386/hvf/x86.c +14 -14
@@ -62,11 +62,11 @@ bool x86_read_segment_descriptor(struct CPUState *cpu, }if (GDT_SEL == sel.ti) { - base =rvmcs (cpu->hvf_fd,VMCS_GUEST_GDTR_BASE ); - limit =rvmcs (cpu->hvf_fd,VMCS_GUEST_GDTR_LIMIT ); + base =rvmcs (cpu->hvf->fd,VMCS_GUEST_GDTR_BASE ); + limit =rvmcs (cpu->hvf->fd,VMCS_GUEST_GDTR_LIMIT ); }else { - base =rvmcs (cpu->hvf_fd,VMCS_GUEST_LDTR_BASE ); - limit =rvmcs (cpu->hvf_fd,VMCS_GUEST_LDTR_LIMIT ); + base =rvmcs (cpu->hvf->fd,VMCS_GUEST_LDTR_BASE ); + limit =rvmcs (cpu->hvf->fd,VMCS_GUEST_LDTR_LIMIT ); }if (sel.index *8 >= limit) {
@@ -85,11 +85,11 @@ bool x86_write_segment_descriptor(struct CPUState *cpu,uint32_t limit;if (GDT_SEL == sel.ti) { - base =rvmcs (cpu->hvf_fd,VMCS_GUEST_GDTR_BASE ); - limit =rvmcs (cpu->hvf_fd,VMCS_GUEST_GDTR_LIMIT ); + base =rvmcs (cpu->hvf->fd,VMCS_GUEST_GDTR_BASE ); + limit =rvmcs (cpu->hvf->fd,VMCS_GUEST_GDTR_LIMIT ); }else { - base =rvmcs (cpu->hvf_fd,VMCS_GUEST_LDTR_BASE ); - limit =rvmcs (cpu->hvf_fd,VMCS_GUEST_LDTR_LIMIT ); + base =rvmcs (cpu->hvf->fd,VMCS_GUEST_LDTR_BASE ); + limit =rvmcs (cpu->hvf->fd,VMCS_GUEST_LDTR_LIMIT ); }if (sel.index *8 >= limit) {
@@ -103,8 +103,8 @@ bool x86_write_segment_descriptor(struct CPUState *cpu,bool x86_read_call_gate (struct CPUState *cpu,struct x86_call_gate *idt_desc,int gate) { -target_ulong base =rvmcs (cpu->hvf_fd,VMCS_GUEST_IDTR_BASE ); -uint32_t limit =rvmcs (cpu->hvf_fd,VMCS_GUEST_IDTR_LIMIT ); +target_ulong base =rvmcs (cpu->hvf->fd,VMCS_GUEST_IDTR_BASE ); +uint32_t limit =rvmcs (cpu->hvf->fd,VMCS_GUEST_IDTR_LIMIT );memset (idt_desc,0 ,sizeof (*idt_desc));if (gate *8 >= limit) {
@@ -118,7 +118,7 @@ bool x86_read_call_gate(struct CPUState *cpu, struct x86_call_gate *idt_desc,bool x86_is_protected (struct CPUState *cpu) { -uint64_t cr0 =rvmcs (cpu->hvf_fd,VMCS_GUEST_CR0 ); +uint64_t cr0 =rvmcs (cpu->hvf->fd,VMCS_GUEST_CR0 );return cr0 &CR0_PE ; }
@@ -136,7 +136,7 @@ bool x86_is_v8086(struct CPUState *cpu)bool x86_is_long_mode (struct CPUState *cpu) { -return rvmcs (cpu->hvf_fd,VMCS_GUEST_IA32_EFER ) &MSR_EFER_LMA ; +return rvmcs (cpu->hvf->fd,VMCS_GUEST_IA32_EFER ) &MSR_EFER_LMA ; }bool x86_is_long64_mode (struct CPUState *cpu)
@@ -149,13 +149,13 @@ bool x86_is_long64_mode(struct CPUState *cpu)bool x86_is_paging_mode (struct CPUState *cpu) { -uint64_t cr0 =rvmcs (cpu->hvf_fd,VMCS_GUEST_CR0 ); +uint64_t cr0 =rvmcs (cpu->hvf->fd,VMCS_GUEST_CR0 );return cr0 &CR0_PG ; }bool x86_is_pae_enabled (struct CPUState *cpu) { -uint64_t cr4 =rvmcs (cpu->hvf_fd,VMCS_GUEST_CR4 ); +uint64_t cr4 =rvmcs (cpu->hvf->fd,VMCS_GUEST_CR4 );return cr4 &CR4_PAE ; }
target/i386/hvf/x86_descr.c +13 -13
@@ -48,47 +48,47 @@ static const struct vmx_segment_field {uint32_t vmx_read_segment_limit (CPUState *cpu,X86Seg seg) { -return (uint32_t )rvmcs (cpu->hvf_fd, vmx_segment_fields[seg].limit); +return (uint32_t )rvmcs (cpu->hvf->fd, vmx_segment_fields[seg].limit); }uint32_t vmx_read_segment_ar (CPUState *cpu,X86Seg seg) { -return (uint32_t )rvmcs (cpu->hvf_fd, vmx_segment_fields[seg].ar_bytes); +return (uint32_t )rvmcs (cpu->hvf->fd, vmx_segment_fields[seg].ar_bytes); }uint64_t vmx_read_segment_base (CPUState *cpu,X86Seg seg) { -return rvmcs (cpu->hvf_fd, vmx_segment_fields[seg].base); +return rvmcs (cpu->hvf->fd, vmx_segment_fields[seg].base); }x68_segment_selector vmx_read_segment_selector (CPUState *cpu,X86Seg seg) {x68_segment_selector sel; - sel.sel =rvmcs (cpu->hvf_fd, vmx_segment_fields[seg].selector); + sel.sel =rvmcs (cpu->hvf->fd, vmx_segment_fields[seg].selector);return sel; }void vmx_write_segment_selector (struct CPUState *cpu,x68_segment_selector selector,X86Seg seg) { -wvmcs (cpu->hvf_fd, vmx_segment_fields[seg].selector, selector.sel); +wvmcs (cpu->hvf->fd, vmx_segment_fields[seg].selector, selector.sel); }void vmx_read_segment_descriptor (struct CPUState *cpu,struct vmx_segment *desc,X86Seg seg) { - desc->sel =rvmcs (cpu->hvf_fd, vmx_segment_fields[seg].selector); - desc->base =rvmcs (cpu->hvf_fd, vmx_segment_fields[seg].base); - desc->limit =rvmcs (cpu->hvf_fd, vmx_segment_fields[seg].limit); - desc->ar =rvmcs (cpu->hvf_fd, vmx_segment_fields[seg].ar_bytes); + desc->sel =rvmcs (cpu->hvf->fd, vmx_segment_fields[seg].selector); + desc->base =rvmcs (cpu->hvf->fd, vmx_segment_fields[seg].base); + desc->limit =rvmcs (cpu->hvf->fd, vmx_segment_fields[seg].limit); + desc->ar =rvmcs (cpu->hvf->fd, vmx_segment_fields[seg].ar_bytes); }void vmx_write_segment_descriptor (CPUState *cpu,struct vmx_segment *desc,X86Seg seg) {const struct vmx_segment_field *sf = &vmx_segment_fields[seg]; -wvmcs (cpu->hvf_fd, sf->base, desc->base); -wvmcs (cpu->hvf_fd, sf->limit, desc->limit); -wvmcs (cpu->hvf_fd, sf->selector, desc->sel); -wvmcs (cpu->hvf_fd, sf->ar_bytes, desc->ar); +wvmcs (cpu->hvf->fd, sf->base, desc->base); +wvmcs (cpu->hvf->fd, sf->limit, desc->limit); +wvmcs (cpu->hvf->fd, sf->selector, desc->sel); +wvmcs (cpu->hvf->fd, sf->ar_bytes, desc->ar); }void x86_segment_descriptor_to_vmx (struct CPUState *cpu,x68_segment_selector selector,struct x86_segment_descriptor *desc,struct vmx_segment *vmx_desc)
target/i386/hvf/x86_emu.c +31 -31
117 lines not on this page · raw message
target/i386/hvf/x86_mmu.c +2 -2
@@ -128,7 +128,7 @@ static bool test_pt_entry(struct CPUState *cpu, struct gpt_translation *pt, pt->err_code |=MMU_PAGE_PT ; } -uint32_t cr0 =rvmcs (cpu->hvf_fd,VMCS_GUEST_CR0 ); +uint32_t cr0 =rvmcs (cpu->hvf->fd,VMCS_GUEST_CR0 );/* check protection */ if (cr0 &CR0_WP ) {if (pt->write_access && !pte_write_access (pte)) {
@@ -173,7 +173,7 @@ static bool walk_gpt(struct CPUState *cpu, target_ulong addr, int err_code, {int top_level, level;bool is_large = false; -target_ulong cr3 =rvmcs (cpu->hvf_fd,VMCS_GUEST_CR3 ); +target_ulong cr3 =rvmcs (cpu->hvf->fd,VMCS_GUEST_CR3 );uint64_t page_mask = pae ?PAE_PTE_PAGE_MASK :LEGACY_PTE_PAGE_MASK ;memset (pt,0 ,sizeof (*pt));
target/i386/hvf/x86_task.c +6 -6
@@ -62,7 +62,7 @@ static void load_state_from_tss32(CPUState *cpu, struct x86_tss_segment32 *tss)X86CPU *x86_cpu =X86_CPU (cpu);CPUX86State *env = &x86_cpu->env; -wvmcs (cpu->hvf_fd,VMCS_GUEST_CR3 , tss->cr3); +wvmcs (cpu->hvf->fd,VMCS_GUEST_CR3 , tss->cr3); env->eip = tss->eip; env->eflags = tss->eflags |2 ;
@@ -111,11 +111,11 @@ static int task_switch_32(CPUState *cpu, x68_segment_selector tss_sel, x68_segmevoid vmx_handle_task_switch (CPUState *cpu,x68_segment_selector tss_sel,int reason,bool gate_valid,uint8_t gate,uint64_t gate_type) { -uint64_t rip =rreg (cpu->hvf_fd,HV_X86_RIP ); +uint64_t rip =rreg (cpu->hvf->fd,HV_X86_RIP );if (!gate_valid || (gate_type !=VMCS_INTR_T_HWEXCEPTION && gate_type !=VMCS_INTR_T_HWINTR && gate_type !=VMCS_INTR_T_NMI )) { -int ins_len =rvmcs (cpu->hvf_fd,VMCS_EXIT_INSTRUCTION_LENGTH ); +int ins_len =rvmcs (cpu->hvf->fd,VMCS_EXIT_INSTRUCTION_LENGTH );macvm_set_rip (cpu, rip + ins_len);return ; }
@@ -174,12 +174,12 @@ void vmx_handle_task_switch(CPUState *cpu, x68_segment_selector tss_sel, int rea//ret = task_switch_16(cpu, tss_sel, old_tss_sel, old_tss_base, &next_tss_desc); VM_PANIC ("task_switch_16" ); -macvm_set_cr0 (cpu->hvf_fd,rvmcs (cpu->hvf_fd,VMCS_GUEST_CR0 ) |CR0_TS ); +macvm_set_cr0 (cpu->hvf->fd,rvmcs (cpu->hvf->fd,VMCS_GUEST_CR0 ) |CR0_TS );x86_segment_descriptor_to_vmx (cpu, tss_sel, &next_tss_desc, &vmx_seg);vmx_write_segment_descriptor (cpu, &vmx_seg,R_TR );store_regs (cpu); -hv_vcpu_invalidate_tlb (cpu->hvf_fd); -hv_vcpu_flush (cpu->hvf_fd); +hv_vcpu_invalidate_tlb (cpu->hvf->fd); +hv_vcpu_flush (cpu->hvf->fd); }
target/i386/hvf/x86hvf.c +105 -105
354 lines not on this page · raw message
Signature · 1 line
2.24.3 (Apple Git-128)
PATCH v6 5/11 arm: Set PSCI to 0.2 for HVF
In reply to Alexander GrafIn Hypervisor.framework, we just pass PSCI calls straight on to the QEMU emulation of it. That means, if TCG is compatible with PSCI 0.2, so are we. Let's transpose that fact in code too.
---
v3 -> v4:
- Combine both if statements
--- target/arm/cpu.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
target/arm/cpu.c +2 -2
@@ -1063,8 +1063,8 @@ static void arm_cpu_initfn(Object *obj) cpu->psci_version =1 ;/* By default assume PSCI v0.1 */ cpu->kvm_target =QEMU_KVM_ARM_TARGET_NONE ; -if (tcg_enabled ()) { - cpu->psci_version =2 ;/* TCG implements PSCI 0.2 */ +if (tcg_enabled () ||hvf_enabled ()) { + cpu->psci_version =2 ;/* TCG and HVF implement PSCI 0.2 */ } }
Signature · 1 line
2.24.3 (Apple Git-128)
Re: [PATCH v6 05/11] arm: Set PSCI to 0.2 for HVF
Quoted 8 lines · Alexander Graf
In Hypervisor.framework, we just pass PSCI calls straight on to the QEMU emulation of it. That means, if TCG is compatible with PSCI 0.2, so are we. Let's transpose that fact in code too.
Signed-off-by Alexander Graf <[email protected]>Reviewed-by Roman Bolshakov <[email protected]>
thanks
-- PMM
PATCH v6 6/11 hvf: Simplify post reset/init/loadvm hooks
In reply to Alexander GrafThe hooks we have that call us after reset, init and loadvm really all just want to say "The reference of all register state is in the QEMU vcpu struct, please push it".
We already have a working pushing mechanism though called cpu->vcpu_dirty, so we can just reuse that for all of the above, syncing state properly the next time we actually execute a vCPU.
This fixes PSCI resets on ARM, as they modify CPU state even after the post init call has completed, but before we execute the vCPU again.
To also make the scheme work for x86, we have to make sure we don't move stale eflags into our env when the vcpu state is dirty.
--- accel/hvf/hvf-cpus.c | 27 +++++++-------------------- target/i386/hvf/x86hvf.c | 5 ++++- 2 files changed, 11 insertions(+), 21 deletions(-)
accel/hvf/hvf-cpus.c +7 -20
@@ -275,39 +275,26 @@ static void hvf_cpu_synchronize_state(CPUState *cpu) } } -static void do_hvf_cpu_synchronize_post_reset (CPUState *cpu, -run_on_cpu_data arg) +static void do_hvf_cpu_synchronize_set_dirty (CPUState *cpu, +run_on_cpu_data arg) { -hvf_put_registers (cpu); - cpu->vcpu_dirty = false; +/* QEMU state is the reference, push it to HVF now and on next entry */ + cpu->vcpu_dirty = true; }static void hvf_cpu_synchronize_post_reset (CPUState *cpu) { -run_on_cpu (cpu, do_hvf_cpu_synchronize_post_reset,RUN_ON_CPU_NULL ); -} - -static void do_hvf_cpu_synchronize_post_init (CPUState *cpu, -run_on_cpu_data arg) -{ -hvf_put_registers (cpu); - cpu->vcpu_dirty = false; +run_on_cpu (cpu, do_hvf_cpu_synchronize_set_dirty,RUN_ON_CPU_NULL ); }static void hvf_cpu_synchronize_post_init (CPUState *cpu) { -run_on_cpu (cpu, do_hvf_cpu_synchronize_post_init,RUN_ON_CPU_NULL ); -} - -static void do_hvf_cpu_synchronize_pre_loadvm (CPUState *cpu, -run_on_cpu_data arg) -{ - cpu->vcpu_dirty = true; +run_on_cpu (cpu, do_hvf_cpu_synchronize_set_dirty,RUN_ON_CPU_NULL ); }static void hvf_cpu_synchronize_pre_loadvm (CPUState *cpu) { -run_on_cpu (cpu, do_hvf_cpu_synchronize_pre_loadvm,RUN_ON_CPU_NULL ); +run_on_cpu (cpu, do_hvf_cpu_synchronize_set_dirty,RUN_ON_CPU_NULL ); }static void hvf_vcpu_destroy (CPUState *cpu)
target/i386/hvf/x86hvf.c +4 -1
@@ -435,7 +435,10 @@ int hvf_process_events(CPUState *cpu_state)X86CPU *cpu =X86_CPU (cpu_state);CPUX86State *env = &cpu->env; - env->eflags =rreg (cpu_state->hvf->fd,HV_X86_RFLAGS ); +if (!cpu_state->vcpu_dirty) { +/* light weight sync for CPU_INTERRUPT_HARD and IF_MASK */ + env->eflags =rreg (cpu_state->hvf->fd,HV_X86_RFLAGS ); + }if (cpu_state->interrupt_request &CPU_INTERRUPT_INIT ) {cpu_synchronize_state (cpu_state);
Signature · 1 line
2.24.3 (Apple Git-128)
Re: [PATCH v6 06/11] hvf: Simplify post reset/init/loadvm hooks
Quoted 12 lines · Alexander Graf
The hooks we have that call us after reset, init and loadvm really all just want to say "The reference of all register state is in the QEMU vcpu struct, please push it".
We already have a working pushing mechanism though called
cpu->vcpu_dirty, so we can just reuse that for all of the above, syncing state properly the next time we actually execute a vCPU.This fixes PSCI resets on ARM, as they modify CPU state even after the post init call has completed, but before we execute the vCPU again.
Quoted 6 lines
To also make the scheme work for x86, we have to make sure we don't move stale eflags into our env when the vcpu state is dirty.
Signed-off-by Alexander Graf <[email protected]>Reviewed-by Roman Bolshakov <[email protected]>Tested-by Roman Bolshakov <[email protected]>
What's the difference between HVF and KVM that means this code doesn't have the same structure the KVM code does here?
thanks
-- PMM
Re: [PATCH v6 06/11] hvf: Simplify post reset/init/loadvm hooks
Quoted 12 lines · Peter Maydell
Quoted 11 lines · Alexander Graf
The hooks we have that call us after reset, init and loadvm really all just want to say "The reference of all register state is in the QEMU vcpu struct, please push it".
We already have a working pushing mechanism though called
cpu->vcpu_dirty, so we can just reuse that for all of the above, syncing state properly the next time we actually execute a vCPU.This fixes PSCI resets on ARM, as they modify CPU state even after the post init call has completed, but before we execute the vCPU again.
Quoted 8 lines
Quoted 6 lines
To also make the scheme work for x86, we have to make sure we don't move stale eflags into our env when the vcpu state is dirty.
Signed-off-by Alexander Graf <[email protected]>Reviewed-by Roman Bolshakov <[email protected]>Tested-by Roman Bolshakov <[email protected]>What's the difference between HVF and KVM that means this code doesn't have the same structure the KVM code does here?
The main reason is that with KVM, responsibility of register reset is shared between kernel and user space. With HVF, user space has everything under full control, so all we need to say is "user space is your reference now". While with KVM, we may need to still say "KVM state is your reference, because it will do the register reset on behalf of us".
Alex
PATCH v6 7/11 hvf: Add Apple Silicon support
In reply to Alexander GrafWith Apple Silicon available to the masses, it's a good time to add support for driving its virtualization extensions from QEMU.
This patch adds all necessary architecture specific code to get basic VMs working. It's still pretty raw, but definitely functional.
Known limitations:
- Vtimer acknowledgement is hacky
- Should implement more sysregs and fault on invalid ones then
- WFI handling is missing, need to marry it with vtimer
---
v1 -> v2:
- Merge vcpu kick function patch
- Implement WFI handling (allows vCPUs to sleep)
- Synchronize system registers (fixes OVMF crashes and reboot)
- Don't always call cpu_synchronize_state()
- Use more fine grained iothread locking
- Populate aa64mmfr0 from hardware
v2 -> v3:
- Advance PC on SMC
- Use cp list interface for sysreg syncs
- Do not set current_cpu
- Fix sysreg isread mask
- Move sysreg handling to functions
- Remove WFI logic again
- Revert to global iothread locking
- Use Hypervisor.h on arm, hv.h does not contain aarch64 definitions
v3 -> v4:
- No longer include Hypervisor.h
v5 -> v6:
- Swap sysreg definition order. This way we're in line with asm outputs.
--- MAINTAINERS | 5 + accel/hvf/hvf-cpus.c | 14 + include/sysemu/hvf_int.h | 9 +- target/arm/hvf/hvf.c | 618 +++++++++++++++++++++++++++++++++++++++ 4 files changed, 645 insertions(+), 1 deletion(-) create mode 100644 target/arm/hvf/hvf.c
MAINTAINERS +5 -0
@@ -442,6 +442,11 @@ F: accel/accel.c F: accel/Makefile.objs F: accel/stubs/Makefile.objs +Apple Silicon HVF CPUs +M: Alexander Graf <[email protected]> +S: Maintained +F: target/arm/hvf/ + X86 HVF CPUs M: Cameron Esfahani <[email protected]> M: Roman Bolshakov <[email protected]>
accel/hvf/hvf-cpus.c +14 -0
@@ -58,6 +58,10 @@#include "sysemu/runstate.h" #include "qemu/guest-random.h" +#ifdef __aarch64__ +#define HV_VM_DEFAULT NULL +#endif +/* Memory slots */ struct mac_slot {
@@ -328,7 +332,11 @@ static int hvf_init_vcpu(CPUState *cpu)pthread_sigmask (SIG_BLOCK ,NULL , &set);sigdelset (&set,SIG_IPI ); +#ifdef __aarch64__ + r =hv_vcpu_create (&cpu->hvf->fd, (hv_vcpu_exit_t **)&cpu->hvf->exit,NULL ); +#else r =hv_vcpu_create ((hv_vcpuid_t *)&cpu->hvf->fd,HV_VCPU_DEFAULT ); +#endif cpu->vcpu_dirty =1 ;assert_hvf_ok (r);
@@ -399,8 +407,14 @@ static void hvf_start_vcpu_thread(CPUState *cpu) cpu, QEMU_THREAD_JOINABLE); } +__attribute__((weak))void hvf_kick_vcpu_thread (CPUState *cpu) +{ +cpus_kick_thread (cpu); +} +static const CpusAccel hvf_cpus = { .create_vcpu_thread = hvf_start_vcpu_thread, + .kick_vcpu_thread = hvf_kick_vcpu_thread, .synchronize_post_reset = hvf_cpu_synchronize_post_reset, .synchronize_post_init = hvf_cpu_synchronize_post_init,
include/sysemu/hvf_int.h +8 -1
@@ -11,7 +11,12 @@#ifndef HVF_INT_H #define HVF_INT_H +#include "qemu/osdep.h" +#ifdef __aarch64__ +#include <Hypervisor/Hypervisor.h> +#else #include <Hypervisor/hv.h> +#endif /* hvf_slot flags */ #define HVF_SLOT_LOG (1 << 0)
@@ -44,7 +49,8 @@ struct HVFState {extern HVFState *hvf_state;struct hvf_vcpu_state { -int fd; +uint64_t fd; +void *exit; };void assert_hvf_ok (hv_return_t ret);
@@ -54,5 +60,6 @@ int hvf_arch_init_vcpu(CPUState *cpu);void hvf_arch_vcpu_destroy (CPUState *cpu);int hvf_vcpu_exec (CPUState *cpu);hvf_slot *hvf_find_overlap_slot (uint64_t ,uint64_t ); +void hvf_kick_vcpu_thread (CPUState *cpu);#endif
target/arm/hvf/hvf.c new file +618 -0
618 lines not on this page · raw message
Signature · 1 line
2.24.3 (Apple Git-128)
Re: [PATCH v6 07/11] hvf: Add Apple Silicon support
Quoted 60 lines · Alexander Graf
With Apple Silicon available to the masses, it's a good time to add support for driving its virtualization extensions from QEMU.
This patch adds all necessary architecture specific code to get basic VMs working. It's still pretty raw, but definitely functional.
Known limitations:
- Vtimer acknowledgement is hacky
- Should implement more sysregs and fault on invalid ones then
- WFI handling is missing, need to marry it with vtimerSigned-off-by Alexander Graf <[email protected]>Reviewed-by Roman Bolshakov <[email protected]>accel/hvf/hvf-cpus.c +13
-0@@ -58,6 +58,10 @@#include "sysemu/runstate.h" #include "qemu/guest-random.h" +#ifdef __aarch64__ +#define HV_VM_DEFAULT NULL +#endif /* Memory slots */ struct mac_slot {@@ -328,7 +332,11 @@ static int hvf_init_vcpu(CPUState *cpu)pthread_sigmask (SIG_BLOCK ,NULL , &set);sigdelset (&set,SIG_IPI ); +#ifdef __aarch64__ + r =hv_vcpu_create (&cpu->hvf->fd, (hv_vcpu_exit_t **)&cpu->hvf->exit,NULL ); +#else r =hv_vcpu_create ((hv_vcpuid_t *)&cpu->hvf->fd,HV_VCPU_DEFAULT ); +#endif cpu->vcpu_dirty =1 ;assert_hvf_ok (r);@@ -399,8 +407,14 @@ static void hvf_start_vcpu_thread(CPUState *cpu) cpu, QEMU_THREAD_JOINABLE); } +__attribute__((weak))void hvf_kick_vcpu_thread (CPUState *cpu) +{ +cpus_kick_thread (cpu); +} +static const CpusAccel hvf_cpus = { .create_vcpu_thread = hvf_start_vcpu_thread, + .kick_vcpu_thread = hvf_kick_vcpu_thread, .synchronize_post_reset = hvf_cpu_synchronize_post_reset, .synchronize_post_init = hvf_cpu_synchronize_post_init,include/sysemu/hvf_int.h +0
-0
include/sysemu/hvf_int.h line 14
Quoted 4 lines
include/sysemu/hvf_int.h +1
-0@@ -11,7 +11,12 @@#ifndef HVF_INT_H #define HVF_INT_H +#include "qemu/osdep.h"
.h files must never include osdep.h (all .c files do as their first include line).
Quoted 9 lines
include/sysemu/hvf_int.h +4
-0+#ifdef __aarch64__ +#include <Hypervisor/Hypervisor.h> +#else #include <Hypervisor/hv.h> +#endif /* hvf_slot flags */ #define HVF_SLOT_LOG (1 << 0)
include/sysemu/hvf_int.h struct HVFState { · line 52
Quoted 5 lines
include/sysemu/hvf_int.h +1
-1@@ -44,7 +49,8 @@ struct HVFState {extern HVFState *hvf_state;struct hvf_vcpu_state { -int fd; +uint64_t fd;
Why the change in the type for 'fd' ?
include/sysemu/hvf_int.h struct HVFState { · line 53
Quoted 1 line
include/sysemu/hvf_int.h +1
-0+void *exit;
Can we define this as a "hv_vcpu_exit_t *" so we don't have to cast it in the call to hv_vcpu_create() ?
Quoted 40 lines
include/sysemu/hvf_int.h +1
-0};void assert_hvf_ok (hv_return_t ret);@@ -54,5 +60,6 @@ int hvf_arch_init_vcpu(CPUState *cpu);void hvf_arch_vcpu_destroy (CPUState *cpu);int hvf_vcpu_exec (CPUState *cpu);hvf_slot *hvf_find_overlap_slot (uint64_t ,uint64_t ); +void hvf_kick_vcpu_thread (CPUState *cpu);#endif target/arm/hvf/hvf.c new file +24
-0@@ -0,0 +1,618 @@ +/* +* QEMU Hypervisor.framework support for Apple Silicon + +* Copyright 2020 Alexander Graf <[email protected]> +* +* This work is licensed under the terms of the GNU GPL, version 2 or later. +* See the COPYING file in the top-level directory. +* +*/ + +#include "qemu/osdep.h" +#include "qemu-common.h" +#include "qemu/error-report.h" + +#include "sysemu/runstate.h" +#include "sysemu/hvf.h" +#include "sysemu/hvf_int.h" +#include "sysemu/hw_accel.h" + +#include "exec/address-spaces.h" +#include "hw/irq.h" +#include "qemu/main-loop.h" +#include "sysemu/accel.h" +#include "sysemu/cpus.h"
target/arm/hvf/hvf.c line 34
Quoted 10 lines
target/arm/hvf/hvf.c new file +10
-0+#include "target/arm/cpu.h" +#include "target/arm/internals.h" + +#define HVF_DEBUG 0 +#define DPRINTF (...) \ + if (HVF_DEBUG) { \ + fprintf(stderr, "HVF %s:%d ", __func__, __LINE__); \ + fprintf(stderr, __VA_ARGS__); \ + fprintf(stderr, "\n"); \ + }
No new DPRINTF macros, please. Use tracepoints.
Quoted 10 lines
target/arm/hvf/hvf.c new file +10
-0+ +#define HVF_SYSREG (crn, crm, op0, op1, op2) \ + ENCODE_AA64_CP_REG(CP_REG_ARM64_SYSREG_CP, crn, crm, op0, op1, op2) +#define PL1_WRITE_MASK 0x4 + +#define SYSREG (op0, op1, crn, crm, op2) \ + ((op0 << 20) | (op2 << 17) | (op1 << 14) | (crn << 10) | (crm << 1)) +#define SYSREG_MASK SYSREG(0x3, 0x7, 0xf, 0xf, 0x7) +#define SYSREG_CNTPCT_EL0 SYSREG(3, 3, 14, 0, 1) +#define SYSREG_PMCCNTR_EL0 SYSREG(3, 3, 9, 13, 0)
target/arm/hvf/hvf.c line 97
Quoted 10 lines
target/arm/hvf/hvf.c new file +7
-0+ +#define WFX_IS_WFE (1 << 0) +static const struct hvf_sreg_match hvf_sreg_match[] = { + {HV_SYS_REG_DBGBVR0_EL1 ,HVF_SYSREG (0 ,0 ,14 ,0 ,4 ) }, + {HV_SYS_REG_DBGBCR0_EL1 ,HVF_SYSREG (0 ,0 ,14 ,0 ,5 ) }, + {HV_SYS_REG_DBGWVR0_EL1 ,HVF_SYSREG (0 ,0 ,14 ,0 ,6 ) }, + {HV_SYS_REG_DBGWCR0_EL1 ,HVF_SYSREG (0 ,0 ,14 ,0 ,7 ) },
I'm not a huge fan of this big long hardcoded list of registers. Is there some way to work from either the QEMU cpregs hashtable or asking the hypervisor framework about what sysregs it has? (Compare the KVM approach, though I admit it has its own issues, so if there's a genuinely better way to do something I'm not ruling it out on principle.)
Quoted 1 line
+#ifdef
SYNC_NO_RAW_REGS
What's this ifdef for?
Quoted 25 lines
target/arm/hvf/hvf.c new file +25
-0+int hvf_get_registers (CPUState *cpu) +{ +ARMCPU *arm_cpu =ARM_CPU (cpu); +CPUARMState *env = &arm_cpu->env; +hv_return_t ret; +uint64_t val; +int i; + +for (i =0 ; i <ARRAY_SIZE (hvf_reg_match); i++) { + ret =hv_vcpu_get_reg (cpu->hvf->fd, hvf_reg_match[i].reg, &val); + *(uint64_t *)((void *)env + hvf_reg_match[i].offset) = val; +assert_hvf_ok (ret); + } + + val =0 ; + ret =hv_vcpu_get_reg (cpu->hvf->fd,HV_REG_FPCR , &val); +assert_hvf_ok (ret); +vfp_set_fpcr (env, val); + + val =0 ; + ret =hv_vcpu_get_reg (cpu->hvf->fd,HV_REG_FPSR , &val); +assert_hvf_ok (ret); +vfp_set_fpsr (env, val); + + ret =hv_vcpu_get_reg (cpu->hvf->fd,HV_REG_CPSR , &val);
target/arm/hvf/hvf.c line 270
Quoted 10 lines
target/arm/hvf/hvf.c new file +10
-0+assert_hvf_ok (ret); +pstate_write (env, val); + +for (i =0 ; i <ARRAY_SIZE (hvf_sreg_match); i++) { + ret =hv_vcpu_get_sys_reg (cpu->hvf->fd, hvf_sreg_match[i].reg, &val); +assert_hvf_ok (ret); + + arm_cpu->cpreg_values[i] = val; + } +write_list_to_cpustate (arm_cpu);
Have I missed it, or are we not syncing the FPU/vector registers?
target/arm/hvf/hvf.c line 535
Quoted 7 lines
target/arm/hvf/hvf.c new file +7
-0+return 0 ; +} +if (iswrite) { + val =hvf_get_reg (cpu, srt); +address_space_write (&address_space_memory, + hvf_exit->exception.physical_address, +MEMTXATTRS_UNSPECIFIED , &val, len);
Does the hvf framework provide a way to report the external-abort if address_space_write() returns something other than MEMTX_OK ?
target/arm/hvf/hvf.c line 593
Quoted 5 lines
target/arm/hvf/hvf.c new file +5
-0+break ; +case EC_AA64_SMC : +cpu_synchronize_state (cpu); +if (arm_is_psci_call (arm_cpu,EXCP_SMC )) { +arm_handle_psci_call (arm_cpu);
Have you checked that all the PSCI code really can cope with being called from a non-TCG accelerator? (As an example the CPU_SUSPEND implementation calls the TCG wfi helper...)
target/arm/hvf/hvf.c line 596
Quoted 3 lines
target/arm/hvf/hvf.c new file +3
-0+ }else { +DPRINTF ("unknown SMC! %016llx" , env->xregs[0 ]); + env->xregs[0 ] =-1 ;
This should inject an UNDEF exception into the guest. (Compare the pre_smc helper in target/arm/op_helper.c for TCG.)
target/arm/hvf/hvf.c line 603
Quoted 7 lines
target/arm/hvf/hvf.c new file +7
-0+ } + env->pc +=4 ; +break ; +default : +cpu_synchronize_state (cpu); +DPRINTF ("exit: %llx [ec=0x%x pc=0x%llx]" , syndrome, ec, env->pc); +error_report ("%llx: unhandled exit %llx" , env->pc, exit_reason);
Hex values should have leading '0x'.
Quoted 5 lines
target/arm/hvf/hvf.c new file +5
-0+ } + +if (advance_pc) { +uint64_t pc; +
target/arm/hvf/hvf.c line 618
Quoted 10 lines
target/arm/hvf/hvf.c new file +10
-0+flush_cpu_state (cpu); + + r =hv_vcpu_get_reg (cpu->hvf->fd,HV_REG_PC , &pc); +assert_hvf_ok (r); + pc +=4 ; + r =hv_vcpu_set_reg (cpu->hvf->fd,HV_REG_PC , pc); +assert_hvf_ok (r); + } + } +}
thanks
-- PMM
Re: [PATCH v6 07/11] hvf: Add Apple Silicon support
Quoted 77 lines · Peter Maydell
Quoted 58 lines · Alexander Graf
With Apple Silicon available to the masses, it's a good time to add support for driving its virtualization extensions from QEMU.
This patch adds all necessary architecture specific code to get basic VMs working. It's still pretty raw, but definitely functional.
Known limitations:
- Vtimer acknowledgement is hacky
- Should implement more sysregs and fault on invalid ones then
- WFI handling is missing, need to marry it with vtimerSigned-off-by Alexander Graf <[email protected]>Reviewed-by Roman Bolshakov <[email protected]>accel/hvf/hvf-cpus.c +13
-0@@ -58,6 +58,10 @@#include "sysemu/runstate.h" #include "qemu/guest-random.h" +#ifdef __aarch64__ +#define HV_VM_DEFAULT NULL +#endif /* Memory slots */ struct mac_slot {@@ -328,7 +332,11 @@ static int hvf_init_vcpu(CPUState *cpu)pthread_sigmask (SIG_BLOCK ,NULL , &set);sigdelset (&set,SIG_IPI ); +#ifdef __aarch64__ + r =hv_vcpu_create (&cpu->hvf->fd, (hv_vcpu_exit_t **)&cpu->hvf->exit,NULL ); +#else r =hv_vcpu_create ((hv_vcpuid_t *)&cpu->hvf->fd,HV_VCPU_DEFAULT ); +#endif cpu->vcpu_dirty =1 ;assert_hvf_ok (r);@@ -399,8 +407,14 @@ static void hvf_start_vcpu_thread(CPUState *cpu) cpu, QEMU_THREAD_JOINABLE); } +__attribute__((weak))void hvf_kick_vcpu_thread (CPUState *cpu) +{ +cpus_kick_thread (cpu); +} +static const CpusAccel hvf_cpus = { .create_vcpu_thread = hvf_start_vcpu_thread, + .kick_vcpu_thread = hvf_kick_vcpu_thread, .synchronize_post_reset = hvf_cpu_synchronize_post_reset, .synchronize_post_init = hvf_cpu_synchronize_post_init,include/sysemu/hvf_int.h +0
-0include/sysemu/hvf_int.h line 14
Quoted 4 lines
include/sysemu/hvf_int.h +1
-0@@ -11,7 +11,12 @@#ifndef HVF_INT_H #define HVF_INT_H +#include "qemu/osdep.h" .h files must never include
osdep.h(all .c files do as their first include line).Quoted 11 lines
include/sysemu/hvf_int.h +4
-0+#ifdef __aarch64__ +#include <Hypervisor/Hypervisor.h> +#else #include <Hypervisor/hv.h> +#endif /* hvf_slot flags */ #define HVF_SLOT_LOG (1 << 0)@@ -44,7 +49,8 @@ struct HVFState {extern HVFState *hvf_state;
Quoted 4 lines
include/sysemu/hvf_int.h struct HVFState { · line 52
Quoted 3 lines
include/sysemu/hvf_int.h +1
-1struct hvf_vcpu_state { -int fd; +uint64_t fd;Why the change in the type for 'fd' ?
Because it is a uint64_t on ARM:
typedef uint64_t hv_vcpu_t
while it is "unsigned" on x86:
typedef unsigned hv_vcpuid_t;
Quoted 4 lines
include/sysemu/hvf_int.h struct HVFState { · line 53
Quoted 2 lines
include/sysemu/hvf_int.h +1
-0+void *exit;Can we define this as a "
hv_vcpu_exit_t*" so we don't have to cast it in the call tohv_vcpu_create()?
That will break compilation on x86, because hv_vcpu_exit_t is only defined for ARM.
Quoted 72 lines
Quoted 41 lines
include/sysemu/hvf_int.h +1
-0};void assert_hvf_ok (hv_return_t ret);@@ -54,5 +60,6 @@ int hvf_arch_init_vcpu(CPUState *cpu);void hvf_arch_vcpu_destroy (CPUState *cpu);int hvf_vcpu_exec (CPUState *cpu);hvf_slot *hvf_find_overlap_slot (uint64_t ,uint64_t ); +void hvf_kick_vcpu_thread (CPUState *cpu);#endif target/arm/hvf/hvf.c new file +24
-0@@ -0,0 +1,618 @@ +/* +* QEMU Hypervisor.framework support for Apple Silicon + +* Copyright 2020 Alexander Graf <[email protected]> +* +* This work is licensed under the terms of the GNU GPL, version 2 or later. +* See the COPYING file in the top-level directory. +* +*/ + +#include "qemu/osdep.h" +#include "qemu-common.h" +#include "qemu/error-report.h" + +#include "sysemu/runstate.h" +#include "sysemu/hvf.h" +#include "sysemu/hvf_int.h" +#include "sysemu/hw_accel.h" + +#include "exec/address-spaces.h" +#include "hw/irq.h" +#include "qemu/main-loop.h" +#include "sysemu/accel.h" +#include "sysemu/cpus.h" target/arm/hvf/hvf.c line 34
Quoted 10 lines
target/arm/hvf/hvf.c new file +10
-0+#include "target/arm/cpu.h" +#include "target/arm/internals.h" + +#define HVF_DEBUG 0 +#define DPRINTF (...) \ + if (HVF_DEBUG) { \ + fprintf(stderr, "HVF %s:%d ", __func__, __LINE__); \ + fprintf(stderr, __VA_ARGS__); \ + fprintf(stderr, "\n"); \ + }No new DPRINTF macros, please. Use tracepoints.
Quoted 9 lines
target/arm/hvf/hvf.c new file +9
-0+ +#define HVF_SYSREG (crn, crm, op0, op1, op2) \ + ENCODE_AA64_CP_REG(CP_REG_ARM64_SYSREG_CP, crn, crm, op0, op1, op2) +#define PL1_WRITE_MASK 0x4 + +#define SYSREG (op0, op1, crn, crm, op2) \ + ((op0 << 20) | (op2 << 17) | (op1 << 14) | (crn << 10) | (crm << 1)) +#define SYSREG_MASK SYSREG(0x3, 0x7, 0xf, 0xf, 0x7) +#define SYSREG_CNTPCT_EL0 SYSREG(3, 3, 14, 0, 1)target/arm/hvf/hvf.c line 97
Quoted 10 lines
target/arm/hvf/hvf.c new file +8
-0+#define SYSREG_PMCCNTR_EL0 SYSREG(3, 3, 9, 13, 0) + +#define WFX_IS_WFE (1 << 0) +static const struct hvf_sreg_match hvf_sreg_match[] = { + {HV_SYS_REG_DBGBVR0_EL1 ,HVF_SYSREG (0 ,0 ,14 ,0 ,4 ) }, + {HV_SYS_REG_DBGBCR0_EL1 ,HVF_SYSREG (0 ,0 ,14 ,0 ,5 ) }, + {HV_SYS_REG_DBGWVR0_EL1 ,HVF_SYSREG (0 ,0 ,14 ,0 ,6 ) }, + {HV_SYS_REG_DBGWCR0_EL1 ,HVF_SYSREG (0 ,0 ,14 ,0 ,7 ) },
Quoted 6 lines
I'm not a huge fan of this big long hardcoded list of registers. Is there some way to work from either the QEMU cpregs hashtable or asking the hypervisor framework about what sysregs it has? (Compare the KVM approach, though I admit it has its own issues, so if there's a genuinely better way to do something I'm not ruling it out on principle.)
If you can think of a way, I'm all ears. So far I could not see one? The supported sysregs is an enum. I could not see any way to query hvf for a list of supported ones.
The enum values *seem* to be encoded the same way KVM encodes them, so we could maybe get away with only an array rather than the struct list. Though that's a bit fragile, as we don't have any guarantees that the register encoding is static.
Quoted 3 lines
Quoted 2 lines
+#ifdef
SYNC_NO_RAW_REGSWhat's this ifdef for?
There's a comment right below that explains it. I did not want to make it #if 0 and wanted to ensure that we list all the enum values from the header in the register list.
Quoted 30 lines
Quoted 30 lines
target/arm/hvf/hvf.c new file +28
-0+int hvf_get_registers (CPUState *cpu) +{ +ARMCPU *arm_cpu =ARM_CPU (cpu); +CPUARMState *env = &arm_cpu->env; +hv_return_t ret; +uint64_t val; +int i; + +for (i =0 ; i <ARRAY_SIZE (hvf_reg_match); i++) { + ret =hv_vcpu_get_reg (cpu->hvf->fd, hvf_reg_match[i].reg, &val); + *(uint64_t *)((void *)env + hvf_reg_match[i].offset) = val; +assert_hvf_ok (ret); + } + + val =0 ; + ret =hv_vcpu_get_reg (cpu->hvf->fd,HV_REG_FPCR , &val); +assert_hvf_ok (ret); +vfp_set_fpcr (env, val); + + val =0 ; + ret =hv_vcpu_get_reg (cpu->hvf->fd,HV_REG_FPSR , &val); +assert_hvf_ok (ret); +vfp_set_fpsr (env, val); + + ret =hv_vcpu_get_reg (cpu->hvf->fd,HV_REG_CPSR , &val); +assert_hvf_ok (ret); +pstate_write (env, val); +
Quoted 8 lines
target/arm/hvf/hvf.c line 270
Quoted 7 lines
target/arm/hvf/hvf.c new file +7
-0+for (i =0 ; i <ARRAY_SIZE (hvf_sreg_match); i++) { + ret =hv_vcpu_get_sys_reg (cpu->hvf->fd, hvf_sreg_match[i].reg, &val); +assert_hvf_ok (ret); + + arm_cpu->cpreg_values[i] = val; + } +write_list_to_cpustate (arm_cpu);Have I missed it, or are we not syncing the FPU/vector registers?
You're absolutely right, they're missing! I'll sync them as well...
Quoted 10 lines
target/arm/hvf/hvf.c line 535
Quoted 8 lines
target/arm/hvf/hvf.c new file +7
-0+return 0 ; +} +if (iswrite) { + val =hvf_get_reg (cpu, srt); +address_space_write (&address_space_memory, + hvf_exit->exception.physical_address, +MEMTXATTRS_UNSPECIFIED , &val, len);Does the hvf framework provide a way to report the external-abort if
address_space_write()returns something other thanMEMTX_OK?
I'm afraid we'd have to manually jump to the interrupt vector if we want to do this.
Quoted 9 lines
target/arm/hvf/hvf.c line 593
Quoted 6 lines
target/arm/hvf/hvf.c new file +5
-0+break ; +case EC_AA64_SMC : +cpu_synchronize_state (cpu); +if (arm_is_psci_call (arm_cpu,EXCP_SMC )) { +arm_handle_psci_call (arm_cpu);Have you checked that all the PSCI code really can cope with being called from a non-TCG accelerator? (As an example the
CPU_SUSPENDimplementation calls the TCG wfi helper...)
I have not explicitly tried it, but I don't see why the TCG implementation of wfi should in principle break with hvf.
Quoted 6 lines
target/arm/hvf/hvf.c line 596
Quoted 4 lines
target/arm/hvf/hvf.c new file +3
-0+ }else { +DPRINTF ("unknown SMC! %016llx" , env->xregs[0 ]); + env->xregs[0 ] =-1 ;This should inject an UNDEF exception into the guest. (Compare the
pre_smchelper intarget/arm/op_helper.cfor TCG.)
That would break Windows, which is one of the main use cases for hvf support in QEMU.
Alex
Re: [PATCH v6 07/11] hvf: Add Apple Silicon support
Quoted 9 lines · Alexander Graf
Quoted 6 lines · Peter Maydell
Quoted 5 lines · Alexander Graf
target/arm/hvf/hvf.c new file +5
-0+break ; +case EC_AA64_SMC : +cpu_synchronize_state (cpu); +if (arm_is_psci_call (arm_cpu,EXCP_SMC )) { +arm_handle_psci_call (arm_cpu);
Quoted 7 lines
Quoted 3 lines
Have you checked that all the PSCI code really can cope with being called from a non-TCG accelerator? (As an example the
CPU_SUSPENDimplementation calls the TCG wfi helper...)I have not explicitly tried it, but I don't see why the TCG implementation of wfi should in principle break with hvf.
Because the TCG implementation of wfi is "set some state fields and then longjump out to the TCG exec_cpu code-execution loop", and hvf doesn't use that loop.
Quoted 9 lines
Quoted 5 lines
target/arm/hvf/hvf.c line 596
Quoted 3 lines
target/arm/hvf/hvf.c new file +3
-0+ }else { +DPRINTF ("unknown SMC! %016llx" , env->xregs[0 ]); + env->xregs[0 ] =-1 ;This should inject an UNDEF exception into the guest. (Compare the
pre_smchelper intarget/arm/op_helper.cfor TCG.)That would break Windows, which is one of the main use cases for hvf support in QEMU.
Why is Windows making bogus SMC calls ?
thanks
-- PMM
Re: [PATCH v6 07/11] hvf: Add Apple Silicon support
Quoted 13 lines · Peter Maydell
Quoted 12 lines · Alexander Graf
Quoted 9 lines · Peter Maydell
target/arm/hvf/hvf.c line 593
Quoted 5 lines · Alexander Graf
target/arm/hvf/hvf.c new file +5
-0+break ; +case EC_AA64_SMC : +cpu_synchronize_state (cpu); +if (arm_is_psci_call (arm_cpu,EXCP_SMC )) { +arm_handle_psci_call (arm_cpu);Have you checked that all the PSCI code really can cope with being called from a non-TCG accelerator? (As an example the
CPU_SUSPENDimplementation calls the TCG wfi helper...)
Quoted 5 lines
Quoted 2 lines
I have not explicitly tried it, but I don't see why the TCG implementation of wfi should in principle break with hvf.
Because the TCG implementation of wfi is "set some state fields and then longjump out to the TCG
exec_cpucode-execution loop", and hvf doesn't use that loop.
I can confirm that it breaks, but are you really sure about the longjmp not working?
What would you prefer instead? Duplicate the PSCI implementation for HVF?
Quoted 10 lines
Quoted 9 lines
Quoted 6 lines
target/arm/hvf/hvf.c line 596
Quoted 4 lines
target/arm/hvf/hvf.c new file +3
-0+ }else { +DPRINTF ("unknown SMC! %016llx" , env->xregs[0 ]); + env->xregs[0 ] =-1 ;This should inject an UNDEF exception into the guest. (Compare the
pre_smchelper intarget/arm/op_helper.cfor TCG.)That would break Windows, which is one of the main use cases for hvf support in QEMU.
Why is Windows making bogus SMC calls ?
Let me have a quick at my crystal ball ... mmmmmmhhhh ... it's a bit blurry unfortunately.
I really don't think I'm the right person to answer that question :). But the Windows loader does invoke weird SMC calls on boot:
BdsDxe: starting Boot0002 "UEFI QEMU NVMe Ctrl 1234 1" from PciRoot(0x0)/Pci(0x1,0x0)/NVMe(0x1,00-00-00-00-00-00-00-00)
ConvertPages: failed to find range 102000 - 102FFF
ConvertPages: range BCCE4000 - BCD05FFF covers multiple entries
ConvertPages: range BCCE0000 - BCCEAFFF covers multiple entrieshvf_unknown_smc unknown SMC! 00000000c3000001
SetUefiImageMemoryAttributes - 0x00000000BF500000 - 0x0000000000040000 (0x0000000000000008) SetUefiImageMemoryAttributes - 0x00000000BC190000 - 0x0000000000040000 (0x0000000000000008) SetUefiImageMemoryAttributes - 0x00000000BC140000 - 0x0000000000040000 (0x0000000000000008) SetUefiImageMemoryAttributes - 0x00000000BF4C0000 - 0x0000000000030000 (0x0000000000000008) SetUefiImageMemoryAttributes - 0x00000000BC0F0000 - 0x0000000000040000 (0x0000000000000008) SetUefiImageMemoryAttributes - 0x00000000BBCB0000 - 0x0000000000040000 (0x0000000000000008) SetUefiImageMemoryAttributes - 0x00000000BBB00000 - 0x0000000000030000 (0x0000000000000008) SetUefiImageMemoryAttributes - 0x00000000BBAC0000 - 0x0000000000030000 (0x0000000000000008) hvf_unknown_smc unknown SMC! 0000000084000000hvf_unknown_smc unknown SMC! 000000008400000ahvf_unknown_smc unknown SMC! 000000008400000ahvf_unknown_smc unknown SMC! 000000008400000ahvf_unknown_smc unknown SMC! 000000008400000ahvf_unknown_smc unknown SMC! 000000008400000ahvf_unknown_smc unknown SMC! 000000008400000ahvf_unknown_smc unknown SMC! 000000008400000ahvf_unknown_smc unknown SMC! 000000008400000ahvf_unknown_smc unknown SMC! 000000008400000ahvf_unknown_smc unknown SMC! 000000008400000a
Alex
Re: [PATCH v6 07/11] hvf: Add Apple Silicon support
Quoted 23 lines · Alexander Graf
Quoted 13 lines · Peter Maydell
Quoted 12 lines · Alexander Graf
Quoted 9 lines · Peter Maydell
target/arm/hvf/hvf.c line 593
Quoted 5 lines · Alexander Graf
target/arm/hvf/hvf.c new file +5
-0+break ; +case EC_AA64_SMC : +cpu_synchronize_state (cpu); +if (arm_is_psci_call (arm_cpu,EXCP_SMC )) { +arm_handle_psci_call (arm_cpu);Have you checked that all the PSCI code really can cope with being called from a non-TCG accelerator? (As an example the
CPU_SUSPENDimplementation calls the TCG wfi helper...)Quoted 5 lines
Quoted 2 lines
I have not explicitly tried it, but I don't see why the TCG implementation of wfi should in principle break with hvf.
Because the TCG implementation of wfi is "set some state fields and then longjump out to the TCG
exec_cpucode-execution loop", and hvf doesn't use that loop.
Quoted 4 lines
I can confirm that it breaks, but are you really sure about the longjmp not working?
What would you prefer instead? Duplicate the PSCI implementation for HVF?
I would prefer that you worked through the details. In other words, mostly my concerns with this series are that it feels like it has a lot of quick-hack "this makes the guests I tested boot" stuff in it. Examples include this PSCI handling, the WFI/timer interrupt bits, the way the GIC is done, and the "let's ignore bogus SMC calls" below.
Quoted 5 lines
Quoted 5 lines
Quoted 5 lines
Quoted 2 lines
This should inject an UNDEF exception into the guest. (Compare the
pre_smchelper intarget/arm/op_helper.cfor TCG.)That would break Windows, which is one of the main use cases for hvf support in QEMU.
Quoted 8 lines
Quoted 1 line
Why is Windows making bogus SMC calls ?
Let me have a quick at my crystal ball ... mmmmmmhhhh ... it's a bit blurry unfortunately.
I really don't think I'm the right person to answer that question :). But the Windows loader does invoke weird SMC calls on boot:
Does it boot under TCG ? Under KVM ?
If there's an SMC API that we ought to be implementing but aren't, then we should implement it consistently. If the guest is doing something wrong, we shouldn't put in fudges to work around that. Once that kind of hack gets into the codebase it is practically impossible to ever get rid of it.
thanks
-- PMM
PATCH v6 8/11 arm: Add Hypervisor.framework build target
In reply to Alexander GrafNow that we have all logic in place that we need to handle Hypervisor.framework on Apple Silicon systems, let's add CONFIG_HVF for aarch64 as well so that we can build it.
---
v1 -> v2:
- Fix build on 32bit arm
v3 -> v4:
- Remove i386-softmmu target
--- meson.build | 11 ++++++++++- target/arm/hvf/meson.build | 3 +++ target/arm/meson.build | 2 ++ 3 files changed, 15 insertions(+), 1 deletion(-) create mode 100644 target/arm/hvf/meson.build
meson.build +10 -1
@@ -74,16 +74,25 @@ else endif accelerator_targets = { 'CONFIG_KVM': kvm_targets } + +if cpu in ['x86', 'x86_64'] + hvf_targets = ['x86_64-softmmu'] +elif cpu in ['aarch64'] + hvf_targets = ['aarch64-softmmu'] +else + hvf_targets = [] +endif + if cpu in ['x86', 'x86_64', 'arm', 'aarch64'] # i368 emulator provides xenpv machine type for multiple architectures accelerator_targets += { 'CONFIG_XEN': ['i386-softmmu', 'x86_64-softmmu'], + 'CONFIG_HVF': hvf_targets, } endif if cpu in ['x86', 'x86_64'] accelerator_targets += { 'CONFIG_HAX': ['i386-softmmu', 'x86_64-softmmu'], - 'CONFIG_HVF': ['x86_64-softmmu'], 'CONFIG_WHPX': ['i386-softmmu', 'x86_64-softmmu'], } endif
target/arm/hvf/meson.build new file +3 -0
@@ -0,0 +1,3 @@ +arm_softmmu_ss.add(when: [hvf, 'CONFIG_HVF'], if_true: files( + 'hvf.c', +))
target/arm/meson.build +2 -0
@@ -54,5 +54,7 @@ arm_softmmu_ss.add(files( 'psci.c', )) +subdir('hvf') + target_arch += {'arm': arm_ss} target_softmmu_arch += {'arm': arm_softmmu_ss}
Signature · 1 line
2.24.3 (Apple Git-128)
Re: [PATCH v6 08/11] arm: Add Hypervisor.framework build target
Quoted 30 lines · Alexander Graf
Now that we have all logic in place that we need to handle Hypervisor.framework on Apple Silicon systems, let's add
CONFIG_HVFfor aarch64 as well so that we can build it.Signed-off-by Alexander Graf <[email protected]>Reviewed-by Roman Bolshakov <[email protected]>---
v1 -> v2:
- Fix build on 32bit arm
v3 -> v4:
- Remove i386-softmmu target
--- meson.build | 11 ++++++++++- target/arm/hvf/meson.build | 3 +++ target/arm/meson.build | 2 ++ 3 files changed, 15 insertions(+), 1 deletion(-) create mode 100644 target/arm/hvf/meson.buildmeson.build +0
-0
meson.build else · line 78
Quoted 5 lines
meson.build +2
-0@@ -74,16 +74,25 @@ else endif accelerator_targets = { 'CONFIG_KVM': kvm_targets } + +if cpu in ['x86', 'x86_64']
We don't support 32-bit x86 hosts so I don't think you need the 'x86' here.
meson.build else · line 90
Quoted 12 lines
meson.build +8
-0+ hvf_targets = ['x86_64-softmmu'] +elif cpu in ['aarch64'] + hvf_targets = ['aarch64-softmmu'] +else + hvf_targets = [] +endif + if cpu in ['x86', 'x86_64', 'arm', 'aarch64'] # i368 emulator provides xenpv machine type for multiple architectures accelerator_targets += { 'CONFIG_XEN': ['i386-softmmu', 'x86_64-softmmu'], + 'CONFIG_HVF': hvf_targets,
This 'if' is specific to the weird Xen thing where for
arm hosts we build the Xen code into a qemu-system-i386/qemu-system-x86_64, so it's the wrong place to add HVF stuff.
I think what you want is to follow the same pattern as the KVM stuff, so just
accelerator_targets += { 'CONFIG_HVF': hvf_targets }
after the if-ladder where you're setting hvf_targets.
thanks
-- PMM
PATCH v6 9/11 arm/hvf: Add a WFI handler
In reply to Alexander GrafFrom: Peter Collingbourne <[email protected]>
Sleep on WFI until the VTIMER is due but allow ourselves to be woken up on IPI.
In this implementation IPI is blocked on the CPU thread at startup and pselect() is used to atomically unblock the signal and begin sleeping. The signal is sent unconditionally so there's no need to worry about races between actually sleeping and the "we think we're sleeping" state. It may lead to an extra wakeup but that's better than missing it entirely.
--- accel/hvf/hvf-cpus.c | 5 ++-- include/sysemu/hvf_int.h | 1 + target/arm/hvf/hvf.c | 56 ++++++++++++++++++++++++++++++++++++++++ 3 files changed, 59 insertions(+), 3 deletions(-)
accel/hvf/hvf-cpus.c +2 -3
@@ -322,15 +322,14 @@ static int hvf_init_vcpu(CPUState *cpu) cpu->hvf =g_malloc0 (sizeof (*cpu->hvf));/* init cpu signals */ -sigset_t set;struct sigaction sigact;memset (&sigact,0 ,sizeof (sigact)); sigact.sa_handler = dummy_signal;sigaction (SIG_IPI , &sigact,NULL ); -pthread_sigmask (SIG_BLOCK ,NULL , &set); -sigdelset (&set,SIG_IPI ); +pthread_sigmask (SIG_BLOCK ,NULL , &cpu->hvf->unblock_ipi_mask); +sigdelset (&cpu->hvf->unblock_ipi_mask,SIG_IPI );#ifdef __aarch64__ r =hv_vcpu_create (&cpu->hvf->fd, (hv_vcpu_exit_t **)&cpu->hvf->exit,NULL );
include/sysemu/hvf_int.h +1 -0
@@ -51,6 +51,7 @@ extern HVFState *hvf_state;struct hvf_vcpu_state {uint64_t fd;void *exit; +sigset_t unblock_ipi_mask; };void assert_hvf_ok (hv_return_t ret);
target/arm/hvf/hvf.c +56 -0
86 lines not on this page · raw message
Signature · 1 line
2.24.3 (Apple Git-128)
Re: [PATCH v6 09/11] arm/hvf: Add a WFI handler
Quoted 91 lines · Alexander Graf
From: Peter Collingbourne <[email protected]>
Sleep on WFI until the VTIMER is due but allow ourselves to be woken up on IPI.
In this implementation IPI is blocked on the CPU thread at startup and
pselect()is used to atomically unblock the signal and begin sleeping. The signal is sent unconditionally so there's no need to worry about races between actually sleeping and the "we think we're sleeping" state. It may lead to an extra wakeup but that's better than missing it entirely.Signed-off-by Peter Collingbourne <[email protected]>[agraf: Remove unused 'set' variable, always advance PC on WFX trap]Signed-off-by Alexander Graf <[email protected]>Acked-by Roman Bolshakov <[email protected]>--- accel/hvf/hvf-cpus.c | 5 ++-- include/sysemu/hvf_int.h | 1 + target/arm/hvf/hvf.c | 56 ++++++++++++++++++++++++++++++++++++++++ 3 files changed, 59 insertions(+), 3 deletions(-)accel/hvf/hvf-cpus.c +2
-3@@ -322,15 +322,14 @@ static int hvf_init_vcpu(CPUState *cpu) cpu->hvf =g_malloc0 (sizeof (*cpu->hvf));/* init cpu signals */ -sigset_t set;struct sigaction sigact;memset (&sigact,0 ,sizeof (sigact)); sigact.sa_handler = dummy_signal;sigaction (SIG_IPI , &sigact,NULL ); -pthread_sigmask (SIG_BLOCK ,NULL , &set); -sigdelset (&set,SIG_IPI ); +pthread_sigmask (SIG_BLOCK ,NULL , &cpu->hvf->unblock_ipi_mask); +sigdelset (&cpu->hvf->unblock_ipi_mask,SIG_IPI );#ifdef __aarch64__ r =hv_vcpu_create (&cpu->hvf->fd, (hv_vcpu_exit_t **)&cpu->hvf->exit,NULL );include/sysemu/hvf_int.h +1
-0@@ -51,6 +51,7 @@ extern HVFState *hvf_state;struct hvf_vcpu_state {uint64_t fd;void *exit; +sigset_t unblock_ipi_mask; };void assert_hvf_ok (hv_return_t ret);target/arm/hvf/hvf.c +5
-0@@ -2,6 +2,7 @@* QEMU Hypervisor.framework support for Apple Silicon * Copyright 2020 Alexander Graf <[email protected]> +* Copyright 2020 Google LLC * * This work is licensed under the terms of the GNU GPL, version 2 or later. * See the COPYING file in the top-level directory. @@ -17,6 +18,8 @@#include "sysemu/hvf_int.h" #include "sysemu/hw_accel.h" +#include <mach/mach_time.h> +#include "exec/address-spaces.h" #include "hw/irq.h" #include "qemu/main-loop.h" @@ -411,6 +414,7 @@ int hvf_arch_init_vcpu(CPUState *cpu)void hvf_kick_vcpu_thread (CPUState *cpu) { +cpus_kick_thread (cpu);hv_vcpus_exit (&cpu->hvf->fd,1 ); }@@ -466,6 +470,18 @@ static int hvf_inject_interrupts(CPUState *cpu)return 0 ; } +static void hvf_wait_for_ipi (CPUState *cpu,struct timespec *ts)
target/arm/hvf/hvf.c static int hvf_inject_interrupts(CPUState *cpu) · line 483
Quoted 10 lines
target/arm/hvf/hvf.c +10
-0+{ +/* +* Use pselect to sleep so that other threads can IPI us while we're +* sleeping. +*/ +qatomic_mb_set (&cpu->thread_kicked, false); +qemu_mutex_unlock_iothread (); +pselect (0 ,0 ,0 ,0 , ts, &cpu->hvf->unblock_ipi_mask); +qemu_mutex_lock_iothread (); +}
It seems a bit odd that this is specific to Arm hvf. Doesn't x86 hvf need "pause until interrupt" functionality ?
Quoted 31 lines
target/arm/hvf/hvf.c +24
-0+int hvf_vcpu_exec (CPUState *cpu) {ARMCPU *arm_cpu =ARM_CPU (cpu);@@ -577,6 +593,46 @@ int hvf_vcpu_exec(CPUState *cpu) }case EC_WFX_TRAP : advance_pc = true; +if (!(syndrome &WFX_IS_WFE ) && !(cpu->interrupt_request & + (CPU_INTERRUPT_HARD |CPU_INTERRUPT_FIQ ))) { + +uint64_t ctl; + r =hv_vcpu_get_sys_reg (cpu->hvf->fd,HV_SYS_REG_CNTV_CTL_EL0 , + &ctl); +assert_hvf_ok (r); + +if (!(ctl &1 ) || (ctl &2 )) { +/* Timer disabled or masked, just wait for an IPI. */ +hvf_wait_for_ipi (cpu,NULL ); +break ; + } + +uint64_t cval; + r =hv_vcpu_get_sys_reg (cpu->hvf->fd,HV_SYS_REG_CNTV_CVAL_EL0 , + &cval); +assert_hvf_ok (r); + +int64_t ticks_to_sleep = cval -mach_absolute_time (); +if (ticks_to_sleep <0 ) { +break ; + }
target/arm/hvf/hvf.c int hvf_vcpu_exec(CPUState *cpu) · line 628
Quoted 10 lines
target/arm/hvf/hvf.c +10
-0+ +uint64_t seconds = ticks_to_sleep / arm_cpu->gt_cntfrq_hz; +uint64_t nanos = + (ticks_to_sleep - arm_cpu->gt_cntfrq_hz * seconds) * +1000000000 / arm_cpu->gt_cntfrq_hz; + +/* +* Don't sleep for less than 2ms. This is believed to improve +* latency of message passing workloads. +*/
Believed by who ?
target/arm/hvf/hvf.c int hvf_vcpu_exec(CPUState *cpu) · line 635
Quoted 7 lines
target/arm/hvf/hvf.c +7
-0+if (!seconds && nanos <2000000 ) { +break ; + } + +struct timespec ts = { seconds, nanos }; +hvf_wait_for_ipi (cpu, &ts); + }
Why doesn't the timer timeout manifest as an IPI ? (Put another way, why is the timer interrupt special?)
thanks
-- PMM
Re: [PATCH v6 09/11] arm/hvf: Add a WFI handler
Quoted 92 lines · Peter Maydell
Quoted 90 lines · Alexander Graf
From: Peter Collingbourne <[email protected]>
Sleep on WFI until the VTIMER is due but allow ourselves to be woken up on IPI.
In this implementation IPI is blocked on the CPU thread at startup and
pselect()is used to atomically unblock the signal and begin sleeping. The signal is sent unconditionally so there's no need to worry about races between actually sleeping and the "we think we're sleeping" state. It may lead to an extra wakeup but that's better than missing it entirely.Signed-off-by Peter Collingbourne <[email protected]>[agraf: Remove unused 'set' variable, always advance PC on WFX trap]Signed-off-by Alexander Graf <[email protected]>Acked-by Roman Bolshakov <[email protected]>--- accel/hvf/hvf-cpus.c | 5 ++-- include/sysemu/hvf_int.h | 1 + target/arm/hvf/hvf.c | 56 ++++++++++++++++++++++++++++++++++++++++ 3 files changed, 59 insertions(+), 3 deletions(-)accel/hvf/hvf-cpus.c +2
-3@@ -322,15 +322,14 @@ static int hvf_init_vcpu(CPUState *cpu) cpu->hvf =g_malloc0 (sizeof (*cpu->hvf));/* init cpu signals */ -sigset_t set;struct sigaction sigact;memset (&sigact,0 ,sizeof (sigact)); sigact.sa_handler = dummy_signal;sigaction (SIG_IPI , &sigact,NULL ); -pthread_sigmask (SIG_BLOCK ,NULL , &set); -sigdelset (&set,SIG_IPI ); +pthread_sigmask (SIG_BLOCK ,NULL , &cpu->hvf->unblock_ipi_mask); +sigdelset (&cpu->hvf->unblock_ipi_mask,SIG_IPI );#ifdef __aarch64__ r =hv_vcpu_create (&cpu->hvf->fd, (hv_vcpu_exit_t **)&cpu->hvf->exit,NULL );include/sysemu/hvf_int.h +1
-0@@ -51,6 +51,7 @@ extern HVFState *hvf_state;struct hvf_vcpu_state {uint64_t fd;void *exit; +sigset_t unblock_ipi_mask; };void assert_hvf_ok (hv_return_t ret);target/arm/hvf/hvf.c +4
-0@@ -2,6 +2,7 @@* QEMU Hypervisor.framework support for Apple Silicon * Copyright 2020 Alexander Graf <[email protected]> +* Copyright 2020 Google LLC * * This work is licensed under the terms of the GNU GPL, version 2 or later. * See the COPYING file in the top-level directory. @@ -17,6 +18,8 @@#include "sysemu/hvf_int.h" #include "sysemu/hw_accel.h" +#include <mach/mach_time.h> +#include "exec/address-spaces.h" #include "hw/irq.h" #include "qemu/main-loop.h" @@ -411,6 +414,7 @@ int hvf_arch_init_vcpu(CPUState *cpu)void hvf_kick_vcpu_thread (CPUState *cpu) { +cpus_kick_thread (cpu);hv_vcpus_exit (&cpu->hvf->fd,1 ); }@@ -466,6 +470,18 @@ static int hvf_inject_interrupts(CPUState *cpu)return 0 ; }
Quoted 14 lines
target/arm/hvf/hvf.c static int hvf_inject_interrupts(CPUState *cpu) · line 483
Quoted 11 lines
target/arm/hvf/hvf.c +11
-0+static void hvf_wait_for_ipi (CPUState *cpu,struct timespec *ts) +{ +/* +* Use pselect to sleep so that other threads can IPI us while we're +* sleeping. +*/ +qatomic_mb_set (&cpu->thread_kicked, false); +qemu_mutex_unlock_iothread (); +pselect (0 ,0 ,0 ,0 , ts, &cpu->hvf->unblock_ipi_mask); +qemu_mutex_lock_iothread (); +}It seems a bit odd that this is specific to Arm hvf. Doesn't x86 hvf need "pause until interrupt" functionality ?
I'm not very familiar with x86 HVF (and I don't have an x86 Mac to test with), but my reading of the x86 HVF code is that there appear to be no exits that put the system to sleep (not even MWAIT which I think is the x86 equivalent of WFI -- the code just appears to busy loop). I think that implies that either we actually busy loop on x86 (seems unlikely to me since I guess someone would have noticed by now) or MWAIT does not actually result in a VM exit, and HVF itself goes to sleep inside hv_vcpu_run(), unlike ARM HVF where WFI results in an exit (and immediate re-entering would otherwise busy loop).
Quoted 35 lines
Quoted 35 lines
target/arm/hvf/hvf.c +28
-0+int hvf_vcpu_exec (CPUState *cpu) {ARMCPU *arm_cpu =ARM_CPU (cpu);@@ -577,6 +593,46 @@ int hvf_vcpu_exec(CPUState *cpu) }case EC_WFX_TRAP : advance_pc = true; +if (!(syndrome &WFX_IS_WFE ) && !(cpu->interrupt_request & + (CPU_INTERRUPT_HARD |CPU_INTERRUPT_FIQ ))) { + +uint64_t ctl; + r =hv_vcpu_get_sys_reg (cpu->hvf->fd,HV_SYS_REG_CNTV_CTL_EL0 , + &ctl); +assert_hvf_ok (r); + +if (!(ctl &1 ) || (ctl &2 )) { +/* Timer disabled or masked, just wait for an IPI. */ +hvf_wait_for_ipi (cpu,NULL ); +break ; + } + +uint64_t cval; + r =hv_vcpu_get_sys_reg (cpu->hvf->fd,HV_SYS_REG_CNTV_CVAL_EL0 , + &cval); +assert_hvf_ok (r); + +int64_t ticks_to_sleep = cval -mach_absolute_time (); +if (ticks_to_sleep <0 ) { +break ; + } + +uint64_t seconds = ticks_to_sleep / arm_cpu->gt_cntfrq_hz; +uint64_t nanos = + (ticks_to_sleep - arm_cpu->gt_cntfrq_hz * seconds) *
Quoted 8 lines
target/arm/hvf/hvf.c int hvf_vcpu_exec(CPUState *cpu) · line 628
Quoted 6 lines
target/arm/hvf/hvf.c +6
-0+1000000000 / arm_cpu->gt_cntfrq_hz; + +/* +* Don't sleep for less than 2ms. This is believed to improve +* latency of message passing workloads. +*/ Believed by who ?
Alexander asked me to add this [1], so I'll defer to him. As I mentioned on the thread I personally would prefer not to have this logic without data specifically collected on the M1, but I don't have a strong opinion.
Quoted 10 lines
target/arm/hvf/hvf.c int hvf_vcpu_exec(CPUState *cpu) · line 635
Quoted 7 lines
target/arm/hvf/hvf.c +7
-0+if (!seconds && nanos <2000000 ) { +break ; + } + +struct timespec ts = { seconds, nanos }; +hvf_wait_for_ipi (cpu, &ts); + }Why doesn't the timer timeout manifest as an IPI ? (Put another way, why is the timer interrupt special?)
Timer timeouts result in an IPI (via HV_EXIT_REASON_VTIMER_ACTIVATED) if they become due while in hv_vcpu_run(). But at this point we are not in hv_vcpu_run() (due to the aforementioned difference in wait behavior between x86 and ARM) so we need to "manually" wait for the timer to become due, re-enter the guest, let it exit with HV_EXIT_REASON_VTIMER_ACTIVATED and then trigger the IPI.
Peter
[1] https://lists.gnu.org/archive/html/qemu-arm/2020-12/msg00056.html
Re: [PATCH v6 09/11] arm/hvf: Add a WFI handler
Quoted 15 lines · Peter Collingbourne
Quoted 10 lines · Peter Maydell
target/arm/hvf/hvf.c int hvf_vcpu_exec(CPUState *cpu) · line 635
Quoted 7 lines · Alexander Graf
target/arm/hvf/hvf.c +7
-0+if (!seconds && nanos <2000000 ) { +break ; + } + +struct timespec ts = { seconds, nanos }; +hvf_wait_for_ipi (cpu, &ts); + }Quoted 2 lines
Why doesn't the timer timeout manifest as an IPI ? (Put another way, why is the timer interrupt special?)
Quoted 6 lines
Timer timeouts result in an IPI (via
HV_EXIT_REASON_VTIMER_ACTIVATED) if they become due while inhv_vcpu_run(). But at this point we are not inhv_vcpu_run()(due to the aforementioned difference in wait behavior between x86 and ARM) so we need to "manually" wait for the timer to become due, re-enter the guest, let it exit withHV_EXIT_REASON_VTIMER_ACTIVATEDand then trigger the IPI.
But WFI doesn't just wait for a timer interrupt, it waits for any interrupt. So it doesn't seem right that the timer interrupt in particular is being handled specially here.
thanks
-- PMM
Re: [PATCH v6 09/11] arm/hvf: Add a WFI handler
Quoted 18 lines · Peter Maydell
Quoted 9 lines · Peter Collingbourne
Quoted 8 lines · Peter Maydell
Quoted 7 lines · Alexander Graf
target/arm/hvf/hvf.c +7
-0+if (!seconds && nanos <2000000 ) { +break ; + } + +struct timespec ts = { seconds, nanos }; +hvf_wait_for_ipi (cpu, &ts); + }Quoted 8 lines
Quoted 2 lines
Why doesn't the timer timeout manifest as an IPI ? (Put another way, why is the timer interrupt special?)
Timer timeouts result in an IPI (via
HV_EXIT_REASON_VTIMER_ACTIVATED) if they become due while inhv_vcpu_run(). But at this point we are not inhv_vcpu_run()(due to the aforementioned difference in wait behavior between x86 and ARM) so we need to "manually" wait for the timer to become due, re-enter the guest, let it exit withHV_EXIT_REASON_VTIMER_ACTIVATEDand then trigger the IPI.
Quoted 3 lines
But WFI doesn't just wait for a timer interrupt, it waits for any interrupt. So it doesn't seem right that the timer interrupt in particular is being handled specially here.
The vtimer is handled by hvf itself and results in a #vmexit when triggered. On wfi, we're switching from an hvf owned vtimer to a QEMU owned one. The only events that can happen to wake us from wfi are kicks (IRQs, maintenance events) or expiry of the vtimer. The select() logic in this patch handles both, as it wakes up on an IPI (kick because of IRQ/maint event) and exits gracefully after the timer deadline.
Alex
Re: [PATCH v6 09/11] arm/hvf: Add a WFI handler
In reply to Peter MaydellQuoted 18 lines · Peter Maydell
Quoted 9 lines · Peter Collingbourne
Quoted 8 lines · Peter Maydell
Quoted 7 lines · Alexander Graf
target/arm/hvf/hvf.c +7
-0+if (!seconds && nanos <2000000 ) { +break ; + } + +struct timespec ts = { seconds, nanos }; +hvf_wait_for_ipi (cpu, &ts); + }Quoted 8 lines
Quoted 2 lines
Why doesn't the timer timeout manifest as an IPI ? (Put another way, why is the timer interrupt special?)
Timer timeouts result in an IPI (via
HV_EXIT_REASON_VTIMER_ACTIVATED) if they become due while inhv_vcpu_run(). But at this point we are not inhv_vcpu_run()(due to the aforementioned difference in wait behavior between x86 and ARM) so we need to "manually" wait for the timer to become due, re-enter the guest, let it exit withHV_EXIT_REASON_VTIMER_ACTIVATEDand then trigger the IPI.
Quoted 3 lines
But WFI doesn't just wait for a timer interrupt, it waits for any interrupt. So it doesn't seem right that the timer interrupt in particular is being handled specially here.
It waits for either an external interrupt (vcpu_kick() -> IPI -> signal -> pselect exits) or a vtimer (kept in the CPU thread, handled by hvf natively when vCPU is running, handled through the pselect timeout when in WFI mode).
In hvf on ARM, the vtimer is handled specially. It is owned by the kernel code when we're inside the CPU loop. We don't even get vtimer MSR exits. However when user space decides to not return to the kernel CPU loop, it needs to handle the vtimer expiry itself. We really only have that case on WFI.
Alex
PATCH v6 10/11 hvf: arm: Add support for GICv3
In reply to Alexander GrafWe currently only support GICv2 emulation. To also support GICv3, we will need to pass a few system registers into their respective handler functions.
This patch adds handling for all of the required system registers, so that we can run with more than 8 vCPUs.
---
v5 -> v6:
- Adapt to new SYSREG() ordering
--- target/arm/hvf/hvf.c | 141 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 141 insertions(+)
target/arm/hvf/hvf.c +141 -0
@@ -22,6 +22,7 @@#include "exec/address-spaces.h" #include "hw/irq.h" +#include "hw/intc/gicv3_internal.h" #include "qemu/main-loop.h" #include "sysemu/accel.h" #include "sysemu/cpus.h"
@@ -46,6 +47,33 @@#define SYSREG_CNTPCT_EL0 SYSREG(3, 3, 14, 0, 1)#define SYSREG_PMCCNTR_EL0 SYSREG(3, 3, 9, 13, 0) +#define SYSREG_ICC_AP0R0_EL1 SYSREG(3, 0, 12, 8, 4) +#define SYSREG_ICC_AP0R1_EL1 SYSREG(3, 0, 12, 8, 5) +#define SYSREG_ICC_AP0R2_EL1 SYSREG(3, 0, 12, 8, 6) +#define SYSREG_ICC_AP0R3_EL1 SYSREG(3, 0, 12, 8, 7) +#define SYSREG_ICC_AP1R0_EL1 SYSREG(3, 0, 12, 9, 0) +#define SYSREG_ICC_AP1R1_EL1 SYSREG(3, 0, 12, 9, 1) +#define SYSREG_ICC_AP1R2_EL1 SYSREG(3, 0, 12, 9, 2) +#define SYSREG_ICC_AP1R3_EL1 SYSREG(3, 0, 12, 9, 3) +#define SYSREG_ICC_ASGI1R_EL1 SYSREG(3, 0, 12, 11, 6) +#define SYSREG_ICC_BPR0_EL1 SYSREG(3, 0, 12, 8, 3) +#define SYSREG_ICC_BPR1_EL1 SYSREG(3, 0, 12, 12, 3) +#define SYSREG_ICC_CTLR_EL1 SYSREG(3, 0, 12, 12, 4) +#define SYSREG_ICC_DIR_EL1 SYSREG(3, 0, 12, 11, 1) +#define SYSREG_ICC_EOIR0_EL1 SYSREG(3, 0, 12, 8, 1) +#define SYSREG_ICC_EOIR1_EL1 SYSREG(3, 0, 12, 12, 1) +#define SYSREG_ICC_HPPIR0_EL1 SYSREG(3, 0, 12, 8, 2) +#define SYSREG_ICC_HPPIR1_EL1 SYSREG(3, 0, 12, 12, 2) +#define SYSREG_ICC_IAR0_EL1 SYSREG(3, 0, 12, 8, 0) +#define SYSREG_ICC_IAR1_EL1 SYSREG(3, 0, 12, 12, 0) +#define SYSREG_ICC_IGRPEN0_EL1 SYSREG(3, 0, 12, 12, 6) +#define SYSREG_ICC_IGRPEN1_EL1 SYSREG(3, 0, 12, 12, 7) +#define SYSREG_ICC_PMR_EL1 SYSREG(3, 0, 4, 6, 0) +#define SYSREG_ICC_RPR_EL1 SYSREG(3, 0, 12, 11, 3) +#define SYSREG_ICC_SGI0R_EL1 SYSREG(3, 0, 12, 11, 7) +#define SYSREG_ICC_SGI1R_EL1 SYSREG(3, 0, 12, 11, 5) +#define SYSREG_ICC_SRE_EL1 SYSREG(3, 0, 12, 12, 5) +#define WFX_IS_WFE (1 << 0)struct hvf_reg_match {
@@ -418,6 +446,38 @@ void hvf_kick_vcpu_thread(CPUState *cpu)hv_vcpus_exit (&cpu->hvf->fd,1 ); } +static uint32_t hvf_reg2cp_reg (uint32_t reg) +{ +return ENCODE_AA64_CP_REG (CP_REG_ARM64_SYSREG_CP , + (reg >>10 ) &0xf , + (reg >>1 ) &0xf , + (reg >>20 ) &0x3 , + (reg >>14 ) &0x7 , + (reg >>17 ) &0x7 ); +} + +static uint64_t hvf_sysreg_read_cp (CPUState *cpu,uint32_t reg) +{ +ARMCPU *arm_cpu =ARM_CPU (cpu); +CPUARMState *env = &arm_cpu->env; +const ARMCPRegInfo *ri; +uint64_t val =0 ; + + ri =get_arm_cp_reginfo (arm_cpu->cp_regs,hvf_reg2cp_reg (reg)); +if (ri) { +if (ri->type &ARM_CP_CONST ) { + val = ri->resetvalue; + }else if (ri->readfn) { + val = ri->readfn (env, ri); + }else { + val =CPREG_FIELD64 (env, ri); + } +DPRINTF ("vgic read from %s [val=%016llx]" , ri->name, val); + } + +return val; +} +static uint64_t hvf_sysreg_read (CPUState *cpu,uint32_t reg) {ARMCPU *arm_cpu =ARM_CPU (cpu);
@@ -431,6 +491,39 @@ static uint64_t hvf_sysreg_read(CPUState *cpu, uint32_t reg)case SYSREG_PMCCNTR_EL0 : val =qemu_clock_get_ns (QEMU_CLOCK_VIRTUAL );break ; +case SYSREG_ICC_AP0R0_EL1 : +case SYSREG_ICC_AP0R1_EL1 : +case SYSREG_ICC_AP0R2_EL1 : +case SYSREG_ICC_AP0R3_EL1 : +case SYSREG_ICC_AP1R0_EL1 : +case SYSREG_ICC_AP1R1_EL1 : +case SYSREG_ICC_AP1R2_EL1 : +case SYSREG_ICC_AP1R3_EL1 : +case SYSREG_ICC_ASGI1R_EL1 : +case SYSREG_ICC_BPR0_EL1 : +case SYSREG_ICC_BPR1_EL1 : +case SYSREG_ICC_DIR_EL1 : +case SYSREG_ICC_EOIR0_EL1 : +case SYSREG_ICC_EOIR1_EL1 : +case SYSREG_ICC_HPPIR0_EL1 : +case SYSREG_ICC_HPPIR1_EL1 : +case SYSREG_ICC_IAR0_EL1 : +case SYSREG_ICC_IAR1_EL1 : +case SYSREG_ICC_IGRPEN0_EL1 : +case SYSREG_ICC_IGRPEN1_EL1 : +case SYSREG_ICC_PMR_EL1 : +case SYSREG_ICC_SGI0R_EL1 : +case SYSREG_ICC_SGI1R_EL1 : +case SYSREG_ICC_SRE_EL1 : + val =hvf_sysreg_read_cp (cpu, reg); +break ; +case SYSREG_ICC_CTLR_EL1 : + val =hvf_sysreg_read_cp (cpu, reg); + +/* AP0R registers above 0 don't trap, expose less PRIs to fit */ + val &= ~ICC_CTLR_EL1_PRIBITS_MASK ; + val |=4 <<ICC_CTLR_EL1_PRIBITS_SHIFT ; +break ;default : DPRINTF("unhandled sysreg read %08x (op0=%d op1=%d op2=%d " "crn=%d crm=%d)", reg, (reg >> 20) & 0x3,
@@ -442,6 +535,24 @@ static uint64_t hvf_sysreg_read(CPUState *cpu, uint32_t reg)return val; } +static void hvf_sysreg_write_cp (CPUState *cpu,uint32_t reg,uint64_t val) +{ +ARMCPU *arm_cpu =ARM_CPU (cpu); +CPUARMState *env = &arm_cpu->env; +const ARMCPRegInfo *ri; + + ri =get_arm_cp_reginfo (arm_cpu->cp_regs,hvf_reg2cp_reg (reg)); + +if (ri) { +if (ri->writefn) { + ri->writefn (env, ri, val); + }else { +CPREG_FIELD64 (env, ri) = val; + } +DPRINTF ("vgic write to %s [val=%016llx]" , ri->name, val); + } +} +static void hvf_sysreg_write (CPUState *cpu,uint32_t reg,uint64_t val) {ARMCPU *arm_cpu =ARM_CPU (cpu);
@@ -449,6 +560,36 @@ static void hvf_sysreg_write(CPUState *cpu, uint32_t reg, uint64_t val)switch (reg) {case SYSREG_CNTPCT_EL0 :break ; +case SYSREG_ICC_AP0R0_EL1 : +case SYSREG_ICC_AP0R1_EL1 : +case SYSREG_ICC_AP0R2_EL1 : +case SYSREG_ICC_AP0R3_EL1 : +case SYSREG_ICC_AP1R0_EL1 : +case SYSREG_ICC_AP1R1_EL1 : +case SYSREG_ICC_AP1R2_EL1 : +case SYSREG_ICC_AP1R3_EL1 : +case SYSREG_ICC_ASGI1R_EL1 : +case SYSREG_ICC_BPR0_EL1 : +case SYSREG_ICC_BPR1_EL1 : +case SYSREG_ICC_CTLR_EL1 : +case SYSREG_ICC_DIR_EL1 : +case SYSREG_ICC_HPPIR0_EL1 : +case SYSREG_ICC_HPPIR1_EL1 : +case SYSREG_ICC_IAR0_EL1 : +case SYSREG_ICC_IAR1_EL1 : +case SYSREG_ICC_IGRPEN0_EL1 : +case SYSREG_ICC_IGRPEN1_EL1 : +case SYSREG_ICC_PMR_EL1 : +case SYSREG_ICC_SGI0R_EL1 : +case SYSREG_ICC_SGI1R_EL1 : +case SYSREG_ICC_SRE_EL1 : +hvf_sysreg_write_cp (cpu, reg, val); +break ; +case SYSREG_ICC_EOIR0_EL1 : +case SYSREG_ICC_EOIR1_EL1 : +hvf_sysreg_write_cp (cpu, reg, val); +qemu_set_irq (arm_cpu->gt_timer_outputs[GTIMER_VIRT ],0 ); +hv_vcpu_set_vtimer_mask (cpu->hvf->fd, false);default :DPRINTF ("unhandled sysreg write %08x" , reg);break ;
Signature · 1 line
2.24.3 (Apple Git-128)
Re: [PATCH v6 10/11] hvf: arm: Add support for GICv3
Quoted 9 lines · Alexander Graf
We currently only support GICv2 emulation. To also support GICv3, we will need to pass a few system registers into their respective handler functions.
This patch adds handling for all of the required system registers, so that we can run with more than 8 vCPUs.
Signed-off-by Alexander Graf <[email protected]>Acked-by Roman Bolshakov <[email protected]>
So, how much of the GICv3 does Hypervisor.framework expect userspace to implement ?
Currently we have two GICv3 implementations:
* hw/intc/arm_gicv3_kvm.c -- which is the stub device that handles the KVM in-kernel GICv3
* hw/intc/arm_gicv3.c -- which is the full-emulation device that assumes that it is working with a TCG CPU
Support for HVF GICv3 needs either another one of these or some serious refactoring of the full-emulation device so that it doesn't assume that the CPU it's dealing with is a TCG one. (I suspect the right design is to bite the bullet and make the implementation follow the hardware in having "the GIC device proper" and "the GIC CPU interface" separate from each other and communicating via an API approximately equivalent to the GIC Stream Protocol as described in the GICv3 architecture specification; but that's a painful refactor and there might be some other approach less invasive but still reasonably clean.)
Quoted 30 lines
static
uint64_thvf_sysreg_read(CPUState *cpu, uint32_t reg){ ARMCPU *arm_cpu = ARM_CPU(cpu);target/arm/hvf/hvf.c +23
-0@@ -431,6 +491,39 @@ static uint64_t hvf_sysreg_read(CPUState *cpu, uint32_t reg)case SYSREG_PMCCNTR_EL0 : val =qemu_clock_get_ns (QEMU_CLOCK_VIRTUAL );break ; +case SYSREG_ICC_AP0R0_EL1 : +case SYSREG_ICC_AP0R1_EL1 : +case SYSREG_ICC_AP0R2_EL1 : +case SYSREG_ICC_AP0R3_EL1 : +case SYSREG_ICC_AP1R0_EL1 : +case SYSREG_ICC_AP1R1_EL1 : +case SYSREG_ICC_AP1R2_EL1 : +case SYSREG_ICC_AP1R3_EL1 : +case SYSREG_ICC_ASGI1R_EL1 : +case SYSREG_ICC_BPR0_EL1 : +case SYSREG_ICC_BPR1_EL1 : +case SYSREG_ICC_DIR_EL1 : +case SYSREG_ICC_EOIR0_EL1 : +case SYSREG_ICC_EOIR1_EL1 : +case SYSREG_ICC_HPPIR0_EL1 : +case SYSREG_ICC_HPPIR1_EL1 : +case SYSREG_ICC_IAR0_EL1 : +case SYSREG_ICC_IAR1_EL1 : +case SYSREG_ICC_IGRPEN0_EL1 : +case SYSREG_ICC_IGRPEN1_EL1 : +case SYSREG_ICC_PMR_EL1 : +case SYSREG_ICC_SGI0R_EL1 : +case SYSREG_ICC_SGI1R_EL1 :
target/arm/hvf/hvf.c static uint64_t hvf_sysreg_read(CPUState *cpu, uint32_t reg) · line 526
Quoted 10 lines
target/arm/hvf/hvf.c +10
-0+case SYSREG_ICC_SRE_EL1 : + val =hvf_sysreg_read_cp (cpu, reg); +break ; +case SYSREG_ICC_CTLR_EL1 : + val =hvf_sysreg_read_cp (cpu, reg); + +/* AP0R registers above 0 don't trap, expose less PRIs to fit */ + val &= ~ICC_CTLR_EL1_PRIBITS_MASK ; + val |=4 <<ICC_CTLR_EL1_PRIBITS_SHIFT ; +break ;
Pretty sure you don't want to be trying to squeeze even the GICv3 cpuif implementation into this source file...
Quoted 52 lines
target/arm/hvf/hvf.c +38
-0default : DPRINTF("unhandled sysreg read %08x (op0=%d op1=%d op2=%d " "crn=%d crm=%d)", reg, (reg >> 20) & 0x3,@@ -442,6 +535,24 @@ static uint64_t hvf_sysreg_read(CPUState *cpu, uint32_t reg)return val; } +static void hvf_sysreg_write_cp (CPUState *cpu,uint32_t reg,uint64_t val) +{ +ARMCPU *arm_cpu =ARM_CPU (cpu); +CPUARMState *env = &arm_cpu->env; +const ARMCPRegInfo *ri; + + ri =get_arm_cp_reginfo (arm_cpu->cp_regs,hvf_reg2cp_reg (reg)); + +if (ri) { +if (ri->writefn) { + ri->writefn (env, ri, val); + }else { +CPREG_FIELD64 (env, ri) = val; + } +DPRINTF ("vgic write to %s [val=%016llx]" , ri->name, val); + } +} +static void hvf_sysreg_write (CPUState *cpu,uint32_t reg,uint64_t val) {ARMCPU *arm_cpu =ARM_CPU (cpu);@@ -449,6 +560,36 @@ static void hvf_sysreg_write(CPUState *cpu, uint32_t reg, uint64_t val)switch (reg) {case SYSREG_CNTPCT_EL0 :break ; +case SYSREG_ICC_AP0R0_EL1 : +case SYSREG_ICC_AP0R1_EL1 : +case SYSREG_ICC_AP0R2_EL1 : +case SYSREG_ICC_AP0R3_EL1 : +case SYSREG_ICC_AP1R0_EL1 : +case SYSREG_ICC_AP1R1_EL1 : +case SYSREG_ICC_AP1R2_EL1 : +case SYSREG_ICC_AP1R3_EL1 : +case SYSREG_ICC_ASGI1R_EL1 : +case SYSREG_ICC_BPR0_EL1 : +case SYSREG_ICC_BPR1_EL1 : +case SYSREG_ICC_CTLR_EL1 : +case SYSREG_ICC_DIR_EL1 : +case SYSREG_ICC_HPPIR0_EL1 : +case SYSREG_ICC_HPPIR1_EL1 : +case SYSREG_ICC_IAR0_EL1 : +case SYSREG_ICC_IAR1_EL1 : +case SYSREG_ICC_IGRPEN0_EL1 : +case SYSREG_ICC_IGRPEN1_EL1 : +case SYSREG_ICC_PMR_EL1 :
target/arm/hvf/hvf.c static void hvf_sysreg_write(CPUState *cpu, uint32_t reg, uint64_t val) · line 592
Quoted 10 lines
target/arm/hvf/hvf.c +10
-0+case SYSREG_ICC_SGI0R_EL1 : +case SYSREG_ICC_SGI1R_EL1 : +case SYSREG_ICC_SRE_EL1 : +hvf_sysreg_write_cp (cpu, reg, val); +break ; +case SYSREG_ICC_EOIR0_EL1 : +case SYSREG_ICC_EOIR1_EL1 : +hvf_sysreg_write_cp (cpu, reg, val); +qemu_set_irq (arm_cpu->gt_timer_outputs[GTIMER_VIRT ],0 ); +hv_vcpu_set_vtimer_mask (cpu->hvf->fd, false);
This definitely looks wrong. Not every interrupt is a timer interrupt, and writing to EOIR in the GIC doesn't squelch the underlying timer irq, that should happen somewhere else.
thanks
-- PMM
Re: [PATCH v6 10/11] hvf: arm: Add support for GICv3
Quoted 11 lines · Peter Maydell
Quoted 8 lines · Alexander Graf
We currently only support GICv2 emulation. To also support GICv3, we will need to pass a few system registers into their respective handler functions.
This patch adds handling for all of the required system registers, so that we can run with more than 8 vCPUs.
Signed-off-by Alexander Graf <[email protected]>Acked-by Roman Bolshakov <[email protected]>So, how much of the GICv3 does Hypervisor.framework expect userspace to implement ?
All of it. There is absolutely 0 handling for anything GIC related in HVF.
Quoted 6 lines
Currently we have two GICv3 implementations:
*hw/intc/arm_gicv3_kvm.c-- which is the stub device that handles the KVM in-kernel GICv3
*hw/intc/arm_gicv3.c-- which is the full-emulation device that assumes that it is working with a TCG CPU
Quoted 10 lines
Support for HVF GICv3 needs either another one of these or some serious refactoring of the full-emulation device so that it doesn't assume that the CPU it's dealing with is a TCG one. (I suspect the right design is to bite the bullet and make the implementation follow the hardware in having "the GIC device proper" and "the GIC CPU interface" separate from each other and communicating via an API approximately equivalent to the GIC Stream Protocol as described in the GICv3 architecture specification; but that's a painful refactor and there might be some other approach less invasive but still reasonably clean.)
Happy to hear good suggestions on how to do a less painful refactor. At the end of the day, while I agree that the arm_gicv3*.c code does rely on the CPU env that usually related to TCG, I don't see why we shouldn't reuse that same data structure to transmit CPU state...
Quoted 102 lines
Quoted 31 lines
static uint64_t hvf_sysreg_read(CPUState *cpu, uint32_t reg) { ARMCPU *arm_cpu = ARM_CPU(cpu);target/arm/hvf/hvf.c +23
-0@@ -431,6 +491,39 @@ static uint64_t hvf_sysreg_read(CPUState *cpu, uint32_t reg)case SYSREG_PMCCNTR_EL0 : val =qemu_clock_get_ns (QEMU_CLOCK_VIRTUAL );break ; +case SYSREG_ICC_AP0R0_EL1 : +case SYSREG_ICC_AP0R1_EL1 : +case SYSREG_ICC_AP0R2_EL1 : +case SYSREG_ICC_AP0R3_EL1 : +case SYSREG_ICC_AP1R0_EL1 : +case SYSREG_ICC_AP1R1_EL1 : +case SYSREG_ICC_AP1R2_EL1 : +case SYSREG_ICC_AP1R3_EL1 : +case SYSREG_ICC_ASGI1R_EL1 : +case SYSREG_ICC_BPR0_EL1 : +case SYSREG_ICC_BPR1_EL1 : +case SYSREG_ICC_DIR_EL1 : +case SYSREG_ICC_EOIR0_EL1 : +case SYSREG_ICC_EOIR1_EL1 : +case SYSREG_ICC_HPPIR0_EL1 : +case SYSREG_ICC_HPPIR1_EL1 : +case SYSREG_ICC_IAR0_EL1 : +case SYSREG_ICC_IAR1_EL1 : +case SYSREG_ICC_IGRPEN0_EL1 : +case SYSREG_ICC_IGRPEN1_EL1 : +case SYSREG_ICC_PMR_EL1 : +case SYSREG_ICC_SGI0R_EL1 : +case SYSREG_ICC_SGI1R_EL1 :target/arm/hvf/hvf.c static uint64_t hvf_sysreg_read(CPUState *cpu, uint32_t reg) · line 526
Quoted 10 lines
target/arm/hvf/hvf.c +10
-0+case SYSREG_ICC_SRE_EL1 : + val =hvf_sysreg_read_cp (cpu, reg); +break ; +case SYSREG_ICC_CTLR_EL1 : + val =hvf_sysreg_read_cp (cpu, reg); + +/* AP0R registers above 0 don't trap, expose less PRIs to fit */ + val &= ~ICC_CTLR_EL1_PRIBITS_MASK ; + val |=4 <<ICC_CTLR_EL1_PRIBITS_SHIFT ; +break ;Pretty sure you don't want to be trying to squeeze even the GICv3 cpuif implementation into this source file...
Quoted 58 lines
target/arm/hvf/hvf.c +44
-0default : DPRINTF("unhandled sysreg read %08x (op0=%d op1=%d op2=%d " "crn=%d crm=%d)", reg, (reg >> 20) & 0x3,@@ -442,6 +535,24 @@ static uint64_t hvf_sysreg_read(CPUState *cpu, uint32_t reg)return val; } +static void hvf_sysreg_write_cp (CPUState *cpu,uint32_t reg,uint64_t val) +{ +ARMCPU *arm_cpu =ARM_CPU (cpu); +CPUARMState *env = &arm_cpu->env; +const ARMCPRegInfo *ri; + + ri =get_arm_cp_reginfo (arm_cpu->cp_regs,hvf_reg2cp_reg (reg)); + +if (ri) { +if (ri->writefn) { + ri->writefn (env, ri, val); + }else { +CPREG_FIELD64 (env, ri) = val; + } +DPRINTF ("vgic write to %s [val=%016llx]" , ri->name, val); + } +} +static void hvf_sysreg_write (CPUState *cpu,uint32_t reg,uint64_t val) {ARMCPU *arm_cpu =ARM_CPU (cpu);@@ -449,6 +560,36 @@ static void hvf_sysreg_write(CPUState *cpu, uint32_t reg, uint64_t val)switch (reg) {case SYSREG_CNTPCT_EL0 :break ; +case SYSREG_ICC_AP0R0_EL1 : +case SYSREG_ICC_AP0R1_EL1 : +case SYSREG_ICC_AP0R2_EL1 : +case SYSREG_ICC_AP0R3_EL1 : +case SYSREG_ICC_AP1R0_EL1 : +case SYSREG_ICC_AP1R1_EL1 : +case SYSREG_ICC_AP1R2_EL1 : +case SYSREG_ICC_AP1R3_EL1 : +case SYSREG_ICC_ASGI1R_EL1 : +case SYSREG_ICC_BPR0_EL1 : +case SYSREG_ICC_BPR1_EL1 : +case SYSREG_ICC_CTLR_EL1 : +case SYSREG_ICC_DIR_EL1 : +case SYSREG_ICC_HPPIR0_EL1 : +case SYSREG_ICC_HPPIR1_EL1 : +case SYSREG_ICC_IAR0_EL1 : +case SYSREG_ICC_IAR1_EL1 : +case SYSREG_ICC_IGRPEN0_EL1 : +case SYSREG_ICC_IGRPEN1_EL1 : +case SYSREG_ICC_PMR_EL1 : +case SYSREG_ICC_SGI0R_EL1 : +case SYSREG_ICC_SGI1R_EL1 : +case SYSREG_ICC_SRE_EL1 : +hvf_sysreg_write_cp (cpu, reg, val); +break ; +case SYSREG_ICC_EOIR0_EL1 :
Quoted 8 lines
target/arm/hvf/hvf.c static void hvf_sysreg_write(CPUState *cpu, uint32_t reg, uint64_t val) · line 592
Quoted 4 lines
target/arm/hvf/hvf.c +4
-0+case SYSREG_ICC_EOIR1_EL1 : +hvf_sysreg_write_cp (cpu, reg, val); +qemu_set_irq (arm_cpu->gt_timer_outputs[GTIMER_VIRT ],0 ); +hv_vcpu_set_vtimer_mask (cpu->hvf->fd, false);This definitely looks wrong. Not every interrupt is a timer interrupt, and writing to EOIR in the GIC doesn't squelch the underlying timer irq, that should happen somewhere else.
The official HVF documentation says that this should happen when the guest emits an EOI in the IRQ controller. The worst thing that can happen here is that the EOI was for someone else and we assert the timer (level!) IRQ line again, which isn't too bad IMHO.
So where else would you put it?
Alex
PATCH v6 11/11 hvf: arm: Implement -cpu host
In reply to Alexander GrafNow that we have working system register sync, we push more target CPU properties into the virtual machine. That might be useful in some situations, but is not the typical case that users want.
So let's add a -cpu host option that allows them to explicitly pass all CPU capabilities of their host CPU into the guest.
--- include/sysemu/hvf.h | 2 ++ target/arm/cpu.c | 9 ++++++--- target/arm/cpu.h | 2 ++ target/arm/hvf/hvf.c | 41 +++++++++++++++++++++++++++++++++++++++++ target/arm/kvm_arm.h | 2 -- 5 files changed, 51 insertions(+), 5 deletions(-)
include/sysemu/hvf.h +2 -0
@@ -19,6 +19,8 @@#ifdef CONFIG_HVF uint32_t hvf_get_supported_cpuid (uint32_t func,uint32_t idx,int reg); +struct ARMCPU ; +void hvf_arm_set_cpu_features_from_host (struct ARMCPU *cpu);extern bool hvf_allowed;#define hvf_enabled () (hvf_allowed)#else /* !CONFIG_HVF */
target/arm/cpu.c +6 -3
@@ -2288,12 +2288,16 @@ static void arm_cpu_class_init(ObjectClass *oc, void *data)#endif } -#ifdef CONFIG_KVM +#if defined(CONFIG_KVM ) || defined(CONFIG_HVF )static void arm_host_initfn (Object *obj) {ARMCPU *cpu =ARM_CPU (obj); +#ifdef CONFIG_KVM kvm_arm_set_cpu_features_from_host (cpu); +#else +hvf_arm_set_cpu_features_from_host (cpu); +#endif if (arm_feature (&cpu->env,ARM_FEATURE_AARCH64 )) {aarch64_add_sve_properties (obj); }
@@ -2305,7 +2309,6 @@ static const TypeInfo host_arm_cpu_type_info = { .parent = TYPE_AARCH64_CPU, .instance_init = arm_host_initfn, }; -#endif static void arm_cpu_instance_init (Object *obj)
@@ -2364,7 +2367,7 @@ static void arm_cpu_register_types(void)type_register_static (&arm_cpu_type_info); -#ifdef CONFIG_KVM +#if defined(CONFIG_KVM ) || defined(CONFIG_HVF )type_register_static (&host_arm_cpu_type_info);#endif
target/arm/cpu.h +2 -0
@@ -2961,6 +2961,8 @@ bool write_cpustate_to_list(ARMCPU *cpu, bool kvm_sync);#define ARM_CPU_TYPE_NAME (name) (name ARM_CPU_TYPE_SUFFIX)#define CPU_RESOLVING_TYPE TYPE_ARM_CPU +#define TYPE_ARM_HOST_CPU "host-" TYPE_ARM_CPU +#define cpu_signal_handler cpu_arm_signal_handler#define cpu_list arm_cpu_list
target/arm/hvf/hvf.c +41 -0
47 lines not on this page · raw message
target/arm/kvm_arm.h +0 -2
@@ -214,8 +214,6 @@ bool kvm_arm_create_scratch_host_vcpu(const uint32_t *cpus_to_try,*/ void kvm_arm_destroy_scratch_host_vcpu (int *fdarray); -#define TYPE_ARM_HOST_CPU "host-" TYPE_ARM_CPU -/** * ARMHostCPUFeatures: information about the host CPU (identified * by asking the host kernel)
Signature · 1 line
2.24.3 (Apple Git-128)
Re: [PATCH v6 11/11] hvf: arm: Implement -cpu host
Quoted 23 lines · Alexander Graf
Now that we have working system register sync, we push more target CPU properties into the virtual machine. That might be useful in some situations, but is not the typical case that users want.
So let's add a -cpu host option that allows them to explicitly pass all CPU capabilities of their host CPU into the guest.
Signed-off-by Alexander Graf <[email protected]>Acked-by Roman Bolshakov <[email protected]>--- include/sysemu/hvf.h | 2 ++ target/arm/cpu.c | 9 ++++++--- target/arm/cpu.h | 2 ++ target/arm/hvf/hvf.c | 41 +++++++++++++++++++++++++++++++++++++++++ target/arm/kvm_arm.h | 2 -- 5 files changed, 51 insertions(+), 5 deletions(-)include/sysemu/hvf.h +0
-0
include/sysemu/hvf.h line 22
Quoted 4 lines
include/sysemu/hvf.h +1
-0@@ -19,6 +19,8 @@#ifdef CONFIG_HVF uint32_t hvf_get_supported_cpuid (uint32_t func,uint32_t idx,int reg); +struct ARMCPU ;
Yuck.
include/sysemu/hvf.h line 23
Quoted 1 line
include/sysemu/hvf.h +1
-0+void hvf_arm_set_cpu_features_from_host (struct ARMCPU *cpu);
This is arm-specific, it doesn't belong in the generic hvf.h.
Put it somewhere else, and somewhere that we can get the typedef from cpu.h, same as with the kvm equivalent.
Quoted 15 lines
include/sysemu/hvf.h +0
-0extern bool hvf_allowed;#define hvf_enabled () (hvf_allowed)#else /* !CONFIG_HVF */ target/arm/cpu.c +1
-1@@ -2288,12 +2288,16 @@ static void arm_cpu_class_init(ObjectClass *oc, void *data)#endif } -#ifdef CONFIG_KVM +#if defined(CONFIG_KVM ) || defined(CONFIG_HVF )static void arm_host_initfn (Object *obj) {
target/arm/cpu.c static void arm_cpu_class_init(ObjectClass *oc, void *data) · line 2303
Quoted 10 lines
target/arm/cpu.c +4
-0ARMCPU *cpu =ARM_CPU (obj); +#ifdef CONFIG_KVM kvm_arm_set_cpu_features_from_host (cpu); +#else +hvf_arm_set_cpu_features_from_host (cpu); +#endif if (arm_feature (&cpu->env,ARM_FEATURE_AARCH64 )) {aarch64_add_sve_properties (obj); }
This adds all the SVE related properties, so you probably need to have an equivalent of the kvm_arm_sve_supported() checks in cpu64.c that make those properties return an error on HVF.
target/arm/cpu.c static const TypeInfo host_arm_cpu_type_info = { · line 2312
Quoted 6 lines
target/arm/cpu.c +0
-1@@ -2305,7 +2309,6 @@ static const TypeInfo host_arm_cpu_type_info = { .parent = TYPE_AARCH64_CPU, .instance_init = arm_host_initfn, }; -#endif
Stray whitespace change.
Quoted 39 lines
target/arm/cpu.c +1
-1static void arm_cpu_instance_init (Object *obj)@@ -2364,7 +2367,7 @@ static void arm_cpu_register_types(void)type_register_static (&arm_cpu_type_info); -#ifdef CONFIG_KVM +#if defined(CONFIG_KVM ) || defined(CONFIG_HVF )type_register_static (&host_arm_cpu_type_info);#endif target/arm/cpu.h +2
-0@@ -2961,6 +2961,8 @@ bool write_cpustate_to_list(ARMCPU *cpu, bool kvm_sync);#define ARM_CPU_TYPE_NAME (name) (name ARM_CPU_TYPE_SUFFIX)#define CPU_RESOLVING_TYPE TYPE_ARM_CPU +#define TYPE_ARM_HOST_CPU "host-" TYPE_ARM_CPU +#define cpu_signal_handler cpu_arm_signal_handler#define cpu_list arm_cpu_listtarget/arm/hvf/hvf.c +7
-0@@ -372,6 +372,47 @@ static uint64_t hvf_get_reg(CPUState *cpu, int rt)return val; } +void hvf_arm_set_cpu_features_from_host (ARMCPU *cpu) +{ +ARMISARegisters host_isar; +const struct isar_regs { +int reg; +uint64_t *val; + } regs[] = {
target/arm/hvf/hvf.c static uint64_t hvf_get_reg(CPUState *cpu, int rt) · line 391
Quoted 10 lines
target/arm/hvf/hvf.c +10
-0+ { HV_SYS_REG_ID_AA64PFR0_EL1, &host_isar.id_aa64pfr0 }, + { HV_SYS_REG_ID_AA64PFR1_EL1, &host_isar.id_aa64pfr1 }, + { HV_SYS_REG_ID_AA64DFR0_EL1, &host_isar.id_aa64dfr0 }, + { HV_SYS_REG_ID_AA64DFR1_EL1, &host_isar.id_aa64dfr1 }, + { HV_SYS_REG_ID_AA64ISAR0_EL1, &host_isar.id_aa64isar0 }, + { HV_SYS_REG_ID_AA64ISAR1_EL1, &host_isar.id_aa64isar1 }, + { HV_SYS_REG_ID_AA64MMFR0_EL1, &host_isar.id_aa64mmfr0 }, + { HV_SYS_REG_ID_AA64MMFR1_EL1, &host_isar.id_aa64mmfr1 }, + { HV_SYS_REG_ID_AA64MMFR2_EL1, &host_isar.id_aa64mmfr2 }, + };
Since there's no AArch32 support in this register list, we should check and error-out if the ID_AA64PFR0_EL1 value we read has 2 in either the .EL0 or .EL1 fields. (This is a never-happen case on current hardware AIUI, but we might as well be explicit about it.)
Quoted 9 lines
target/arm/hvf/hvf.c +9
-0+hv_vcpu_t fd; +hv_vcpu_exit_t *exit; +int i; + + cpu->dtb_compatible ="arm,arm-v8" ; + cpu->env.features = (1ULL <<ARM_FEATURE_V8 ) | + (1ULL <<ARM_FEATURE_NEON ) | + (1ULL <<ARM_FEATURE_AARCH64 ) | + (1ULL << ARM_FEATURE_PMU) |
target/arm/hvf/hvf.c static uint64_t hvf_get_reg(CPUState *cpu, int rt) · line 410
Quoted 10 lines
target/arm/hvf/hvf.c +10
-0+ (1ULL <<ARM_FEATURE_GENERIC_TIMER ); + +/* We set up a small vcpu to extract host registers */ + +assert_hvf_ok (hv_vcpu_create (&fd, &exit,NULL )); +for (i =0 ; i <ARRAY_SIZE (regs); i++) { +assert_hvf_ok (hv_vcpu_get_sys_reg (fd, regs[i].reg, regs[i].val)); + } +assert_hvf_ok (hv_vcpu_get_sys_reg (fd,HV_SYS_REG_MIDR_EL1 , &cpu->midr)); +assert_hvf_ok (hv_vcpu_destroy (fd));
Nicer to follow the KVM approach of only doing this once and caching the results in arm_host_cpu_features, so that for a many-cores VM you don't do it once per core.
Quoted 22 lines
target/arm/hvf/hvf.c +5
-0+ + cpu->isar = host_isar; + cpu->reset_sctlr =0x00c50078 ; +} +void hvf_arch_vcpu_destroy (CPUState *cpu) { }target/arm/kvm_arm.h +0
-3@@ -214,8 +214,6 @@ bool kvm_arm_create_scratch_host_vcpu(const uint32_t *cpus_to_try,*/ void kvm_arm_destroy_scratch_host_vcpu (int *fdarray); -#define TYPE_ARM_HOST_CPU "host-" TYPE_ARM_CPU -/** * ARMHostCPUFeatures: information about the host CPU (identified * by asking the host kernel) --
Quoted 1 line
2.24.3 (Apple Git-128)
thanks
-- PMM
Re: [PATCH v6 11/11] hvf: arm: Implement -cpu host
Quoted 29 lines · Peter Maydell
Quoted 22 lines · Alexander Graf
Now that we have working system register sync, we push more target CPU properties into the virtual machine. That might be useful in some situations, but is not the typical case that users want.
So let's add a -cpu host option that allows them to explicitly pass all CPU capabilities of their host CPU into the guest.
Signed-off-by Alexander Graf <[email protected]>Acked-by Roman Bolshakov <[email protected]>--- include/sysemu/hvf.h | 2 ++ target/arm/cpu.c | 9 ++++++--- target/arm/cpu.h | 2 ++ target/arm/hvf/hvf.c | 41 +++++++++++++++++++++++++++++++++++++++++ target/arm/kvm_arm.h | 2 -- 5 files changed, 51 insertions(+), 5 deletions(-)include/sysemu/hvf.h +0
-0include/sysemu/hvf.h line 22
Quoted 4 lines
include/sysemu/hvf.h +1
-0@@ -19,6 +19,8 @@#ifdef CONFIG_HVF uint32_t hvf_get_supported_cpuid (uint32_t func,uint32_t idx,int reg); +struct ARMCPU ;Yuck.
[...]
Quoted 14 lines
Quoted 14 lines
include/sysemu/hvf.h +14
-0+hv_vcpu_t fd; +hv_vcpu_exit_t *exit; +int i; + + cpu->dtb_compatible ="arm,arm-v8" ; + cpu->env.features = (1ULL <<ARM_FEATURE_V8 ) | + (1ULL <<ARM_FEATURE_NEON ) | + (1ULL <<ARM_FEATURE_AARCH64 ) | + (1ULL <<ARM_FEATURE_PMU ) | + (1ULL <<ARM_FEATURE_GENERIC_TIMER ); + +/* We set up a small vcpu to extract host registers */ + +assert_hvf_ok (hv_vcpu_create (&fd, &exit,NULL ));
Quoted 8 lines
include/sysemu/hvf.h
Quoted 5 lines
include/sysemu/hvf.h +5
-0+for (i =0 ; i <ARRAY_SIZE (regs); i++) { +assert_hvf_ok (hv_vcpu_get_sys_reg (fd, regs[i].reg, regs[i].val)); + } +assert_hvf_ok (hv_vcpu_get_sys_reg (fd,HV_SYS_REG_MIDR_EL1 , &cpu->midr)); +assert_hvf_ok (hv_vcpu_destroy (fd));Nicer to follow the KVM approach of only doing this once and caching the results in
arm_host_cpu_features, so that for a many-cores VM you don't do it once per core.
I tend to disagree. This scales nicely with the number of cores you have in the system and it's blazingly fast :). I would rather like to optimize for simplicity here.
The rest of the comments I agree with and will address them in v7 :)
Alex
Re: [PATCH v6 11/11] hvf: arm: Implement -cpu host
Quoted 11 lines · Alexander Graf
Quoted 3 lines · Peter Maydell
Nicer to follow the KVM approach of only doing this once and caching the results in
arm_host_cpu_features, so that for a many-cores VM you don't do it once per core.I tend to disagree. This scales nicely with the number of cores you have in the system and it's blazingly fast :). I would rather like to optimize for simplicity here.
How does "do something once per vCPU" scale better than "do something once when QEMU starts" ??
I would prefer to optimise for "don't be unnecessarily different from how we do stuff with KVM", please.
thanks
-- PMM
Patchew URL: https://patchew.org/QEMU/[email protected]/
Patchew URL: https://patchew.org/QEMU/[email protected]/
Hi,
This series seems to have some coding style problems. See output below for more information:
Type: series
Message-id: [email protected]
Subject: [PATCH v6 00/11] hvf: Implement Apple Silicon Support
=== TEST SCRIPT BEGIN ===
#!/bin/bash
git rev-parse base > /dev/null || exit 0
git config --local diff.renamelimit 0
git config --local diff.renames True
git config --local diff.algorithm histogram./scripts/checkpatch.pl --mailback base..
=== TEST SCRIPT END ===
Updating 3c8cf5a9c21ff8782164d1def7f44bd888713384 From https://github.com/patchew-project/qemu
- [tag update] patchew/[email protected] -> patchew/[email protected]
* [new tag] patchew/[email protected] -> patchew/[email protected]
Switched to a new branch 'test'
d212671 hvf: arm: Implement -cpu host
5421e5f hvf: arm: Add support for GICv3
611ed95 arm/hvf: Add a WFI handler
f186921 arm: Add Hypervisor.framework build target f265d89 hvf: Add Apple Silicon support
8260850 hvf: Simplify post reset/init/loadvm hooks 4761f3e arm: Set PSCI to 0.2 for HVF
6626d7b hvf: Introduce hvf vcpu struct
39205aa hvf: Move common code out
950e618 hvf: x86: Remove unused definitions 3fa2296 hvf: Add hypervisor entitlement to output binaries
=== OUTPUT BEGIN ===
1/11 Checking commit 3fa229624043 (hvf: Add hypervisor entitlement to output binaries)
WARNING: added, moved or deleted file(s), does MAINTAINERS need updating? #23:
new file mode 100644
total: 0 errors, 1 warnings, 62 lines checked
Patch 1/11 has style problems, please review. If any of these errors are false positives report them to the maintainer, see CHECKPATCH in MAINTAINERS.
2/11 Checking commit 950e618cfb15 (hvf: x86: Remove unused definitions) 3/11 Checking commit 39205aaec1dd (hvf: Move common code out) 4/11 Checking commit 6626d7b844ca (hvf: Introduce hvf vcpu struct)
WARNING: line over 80 characters
#155: FILE: target/i386/hvf/hvf.c:213:
+ wvmcs(cpu->hvf->fd, VMCS_ENTRY_CTLS, cap2ctrl(hvf_state->hvf_caps->vmx_cap_entry,
ERROR: "(foo*)" should be "(foo *)"
#763: FILE: target/i386/hvf/x86hvf.c:85:
+ if (hv_vcpu_write_fpstate(cpu_state->hvf->fd, (void*)xsave, 4096)) {
ERROR: "(foo*)" should be "(foo *)"
#844: FILE: target/i386/hvf/x86hvf.c:167:
+ if (hv_vcpu_read_fpstate(cpu_state->hvf->fd, (void*)xsave, 4096)) {
total: 2 errors, 1 warnings, 996 lines checked
Patch 4/11 has style problems, please review. If any of these errors are false positives report them to the maintainer, see CHECKPATCH in MAINTAINERS.
5/11 Checking commit 4761f3e15d29 (arm: Set PSCI to 0.2 for HVF) 6/11 Checking commit 82608506deda (hvf: Simplify post reset/init/loadvm hooks) 7/11 Checking commit f265d897177f (hvf: Add Apple Silicon support)
WARNING: architecture specific defines should be avoided
#54: FILE: accel/hvf/hvf-cpus.c:61:
+#ifdef __aarch64__
WARNING: architecture specific defines should be avoided #65: FILE: accel/hvf/hvf-cpus.c:335:
+#ifdef __aarch64__
WARNING: architecture specific defines should be avoided #97: FILE: include/sysemu/hvf_int.h:15:
+#ifdef __aarch64__
WARNING: line over 80 characters
#585: FILE: target/arm/hvf/hvf.c:458:
+ hv_vcpu_set_pending_interrupt(cpu->hvf->fd, HV_INTERRUPT_TYPE_FIQ, true);
WARNING: line over 80 characters
#590: FILE: target/arm/hvf/hvf.c:463:
+ hv_vcpu_set_pending_interrupt(cpu->hvf->fd, HV_INTERRUPT_TYPE_IRQ, true);
total: 0 errors, 5 warnings, 691 lines checked
Patch 7/11 has style problems, please review. If any of these errors are false positives report them to the maintainer, see
CHECKPATCH in MAINTAINERS.
8/11 Checking commit f186921cf0db (arm: Add Hypervisor.framework build target)
WARNING: added, moved or deleted file(s), does MAINTAINERS need updating? #54:
new file mode 100644
total: 0 errors, 1 warnings, 36 lines checked
Patch 8/11 has style problems, please review. If any of these errors are false positives report them to the maintainer, see CHECKPATCH in MAINTAINERS.
9/11 Checking commit 611ed957b3e2 (arm/hvf: Add a WFI handler) 10/11 Checking commit 5421e5fb793a (hvf: arm: Add support for GICv3) 11/11 Checking commit d21267146369 (hvf: arm: Implement -cpu host) === OUTPUT END ===
Test command exited with code: 1
The full log is available at
http://patchew.org/logs/[email protected]/testing.checkpatch/?type=message.
---
Email generated automatically by Patchew [https://patchew.org/].
Please send your feedback to [email protected]
Am 20.01.21 um 23:44 schrieb Alexander Graf:
Quoted 8 lines
Now that Apple Silicon is widely available, people are obviously excited to try and run virtualized workloads on them, such as Linux and Windows.
This patch set implements a fully functional version to get the ball going on that. With this applied, I can successfully run both Linux and Windows as guests. I am not aware of any limitations specific to Hypervisor.framework apart from:
Quoted 7 lines
- Live migration / savevm
- gdbstub debugging (SP register)Enjoy!
Alex
Alex, did you already try running make check-tcg on a new Mac?
I currently struggle with tests/tcg/aarch64/system/boot.S which is not accepted by the Apple clang compiler.
It first complains about ".section .rodata". That can be replaced by ".cstring", but then other errors are reported (unknown AArch64 fixup kind, ADR/ADRP relocations must be GOT relative, fixup value out of range).
Regards,
Stefan
Quoted 4 lines · Alexander Graf
Now that Apple Silicon is widely available, people are obviously excited to try and run virtualized workloads on them, such as Linux and Windows.
Quoted 8 lines
This patch set implements a fully functional version to get the ball going on that. With this applied, I can successfully run both Linux and Windows as guests. I am not aware of any limitations specific to Hypervisor.framework apart from:
- Live migration / savevm
- gdbstub debugging (SP register)
I've gone through making code review comments.
Since patch 1 is also required for Big Sur support on x86 Macs, I'll take that via target-arm.next now (unless anybody would rather it went in via a different route).
thanks
-- PMM
Quoted 14 lines · Peter Maydell
Quoted 4 lines · Alexander Graf
Now that Apple Silicon is widely available, people are obviously excited to try and run virtualized workloads on them, such as Linux and Windows.
Quoted 8 lines
This patch set implements a fully functional version to get the ball going on that. With this applied, I can successfully run both Linux and Windows as guests. I am not aware of any limitations specific to Hypervisor.framework apart from:
- Live migration / savevm
- gdbstub debugging (SP register)
Quoted 6 lines
I've gone through making code review comments.
Since patch 1 is also required for Big Sur support on x86 Macs, I'll take that via target-arm.next now (unless anybody would rather it went in via a different route).
Hi Peter,
I wonder if patch 1 and patch 2 should go via Paolo's i386 or misc tree? (IMO whatever the fastest way to master works).
Both are reviewed and nobody raised objections to them.
Thanks,
Roman