Skip to contentSkip to conversation

kontron-sl-mx8mm: Select the CONFIG_CMD_UNZIP option

PATCH In review Fabio Estevam 3 participants 3 messages May 10, 2022 – May 20, 2022

lore
Share & tools
lore
#0 lore raw

PATCH 1/1 kontron-sl-mx8mm: Select the CONFIG_CMD_UNZIP option

From: Fabio Estevam <[email protected]>

Select the CMD_UNZIP option so that the 'gzwrite' command can be used to flash wic.gz image into the eMMC.

---
 configs/kontron-sl-mx8mm_defconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
configs/kontron-sl-mx8mm_defconfig +1 -1
index 1375c78a8c44..f07b7890a0ce 100644
@@ -37,7 +37,7 @@ CONFIG_SPL_WATCHDOG=y
 CONFIG_SPL_ATF=y
 CONFIG_CMD_NVEDIT_EFI=y
 # CONFIG_CMD_LZMADEC is not set
-# CONFIG_CMD_UNZIP is not set
+CONFIG_CMD_UNZIP=y
 CONFIG_CMD_CLK=y
 CONFIG_CMD_DFU=y
 CONFIG_CMD_FUSE=y
Signature · 1 line
2.25.1
Reviewed-by on v1 1/1
#1 lore raw

Am 11.05.22 um 01:06 schrieb Fabio Estevam:

Quoted 6 lines

From: Fabio Estevam <[email protected]>

Select the CMD_UNZIP option so that the 'gzwrite' command can be used to flash wic.gz image into the eMMC.

Quoted 17 lines
---
 configs/kontron-sl-mx8mm_defconfig | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
configs/kontron-sl-mx8mm_defconfig +1 -1
index 1375c78a8c44..f07b7890a0ce 100644
@@ -37,7 +37,7 @@ CONFIG_SPL_WATCHDOG=y
 CONFIG_SPL_ATF=y
 CONFIG_CMD_NVEDIT_EFI=y
 # CONFIG_CMD_LZMADEC is not set
-# CONFIG_CMD_UNZIP is not set
+CONFIG_CMD_UNZIP=y
 CONFIG_CMD_CLK=y
 CONFIG_CMD_DFU=y
 CONFIG_CMD_FUSE=y
#2 lore raw

PATCH 1/1 kontron-sl-mx8mm: Select the CONFIG_CMD_UNZIP option

In reply to Fabio Estevam
Quoted 5 lines

From: Fabio Estevam <[email protected]>
Select the CMD_UNZIP option so that the 'gzwrite' command can be used to flash wic.gz image into the eMMC.

Applied to u-boot-imx, master, thanks !

Best regards,
Stefano Babic

Signature · 5 lines
=====================================================================
DENX Software Engineering GmbH,      Managing Director: Wolfgang Denk
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-53 Fax: +49-8142-66989-80 Email: [email protected]
=====================================================================