Bluez + 6630 rfcomm was working, suddenly died.
Hi,
I had bluez + ubuntu hoary making a ppp connection over bluetooth to my 6630, just fine for a few days, by following the instructions here:
http://www.teaparty.net/technotes/blue-gprs.html
and then suddenly it broke.
now, when I do
'pppd call gprs', it just returns, the phone never prompts me to accept the connection, and no connection is made.
it seems to be communicating:
rfcomm show
rfcomm0: 00:12:62:DC:EA:63 channel 1 clean root@stefvaio:~ # pppd call gprs
root@stefvaio:~ # rfcomm show
rfcomm0: 00:12:62:DC:EA:63 channel 1 config [tty-attached] root@stefvaio:~ # rfcomm show
rfcomm0: 00:12:62:DC:EA:63 channel 1 config [tty-attached] root@stefvaio:~ # rfcomm show
rfcomm0: 00:12:62:DC:EA:63 channel 1 config [tty-attached] root@stefvaio:~ # rfcomm show
rfcomm0: 00:12:62:DC:EA:63 channel 1 config [tty-attached] root@stefvaio:~ # rfcomm show
rfcomm0: 00:12:62:DC:EA:63 channel 1 config [tty-attached] root@stefvaio:~ # rfcomm show
rfcomm0: 00:12:62:DC:EA:63 channel 1 config [tty-attached] root@stefvaio:~ # rfcomm show
rfcomm0: 00:12:62:DC:EA:63 channel 1 config [tty-attached] root@stefvaio:~ # rfcomm show
rfcomm0: 00:12:62:DC:EA:63 channel 1 disconnecting [tty-attached] root@stefvaio:~ # rfcomm show
rfcomm0: 00:12:62:DC:EA:63 channel 1 closed root@stefvaio:~ #
but it doesn't seem able to make the connection anymore
I did a couple of things (overexcited by the ease with which I got it working), that might have caused this.
I tried to re-pair the phone with the laptop, because I wanted to change the name of the phone. So I deleted the pairing on the phone, and then the /etc/bluetooth/link_key . Now when I re-pair, it finds the device, but just hangs with 'waiting for stefvaio-0', and then 'says unable to pair' . The phone still works fine with another machine running OSX (and I realise you can change the name without re-pairing. woe is me)
so it looks like pairing is the cause of the problem.
How do I re-pair the phone with my laptop, short of reinstalling everything?
where should I be looking for further diagnostics?
I also changed my hcid.conf to try and get my palm sync working too, so that may have caused the problem.
I have attached the hcid.conf in case it's glaringly obvious.
This is a shame. I've waited *years* for my phone to become a decent access device, and then after a weekend I've broken it.
Marcel Holtmann
maintainerHi Stefan,
Quoted 55 lines
I had bluez + ubuntu hoary making a ppp connection over bluetooth to my 6630, just fine for a few days, by following the instructions here:
http://www.teaparty.net/technotes/blue-gprs.html
and then suddenly it broke.
now, when I do
'pppd call gprs', it just returns, the phone never prompts me to accept the connection, and no connection is made.it seems to be communicating:
rfcomm show
rfcomm0: 00:12:62:DC:EA:63 channel 1 clean root@stefvaio:~ # pppd call gprs
root@stefvaio:~ # rfcomm show
rfcomm0: 00:12:62:DC:EA:63 channel 1 config [tty-attached] root@stefvaio:~ # rfcomm show
rfcomm0: 00:12:62:DC:EA:63 channel 1 config [tty-attached] root@stefvaio:~ # rfcomm show
rfcomm0: 00:12:62:DC:EA:63 channel 1 config [tty-attached] root@stefvaio:~ # rfcomm show
rfcomm0: 00:12:62:DC:EA:63 channel 1 config [tty-attached] root@stefvaio:~ # rfcomm show
rfcomm0: 00:12:62:DC:EA:63 channel 1 config [tty-attached] root@stefvaio:~ # rfcomm show
rfcomm0: 00:12:62:DC:EA:63 channel 1 config [tty-attached] root@stefvaio:~ # rfcomm show
rfcomm0: 00:12:62:DC:EA:63 channel 1 config [tty-attached] root@stefvaio:~ # rfcomm show
rfcomm0: 00:12:62:DC:EA:63 channel 1 disconnecting [tty-attached] root@stefvaio:~ # rfcomm show
rfcomm0: 00:12:62:DC:EA:63 channel 1 closed root@stefvaio:~ #but it doesn't seem able to make the connection anymore
I did a couple of things (overexcited by the ease with which I got it working), that might have caused this.
I tried to re-pair the phone with the laptop, because I wanted to change the name of the phone. So I deleted the pairing on the phone, and then the
/etc/bluetooth/link_key. Now when I re-pair, it finds the device, but just hangs with 'waiting for stefvaio-0', and then 'says unable to pair' . The phone still works fine with another machine running OSX (and I realise you can change the name without re-pairing. woe is me)so it looks like pairing is the cause of the problem.
How do I re-pair the phone with my laptop, short of reinstalling everything?
where should I be looking for further diagnostics?
Quoted 7 lines
I also changed my hcid.conf to try and get my palm sync working too, so that may have caused the problem.
I have attached the hcid.conf in case it's glaringly obvious.
This is a shame. I've waited *years* for my phone to become a decent access device, and then after a weekend I've broken it.
show us the output of "hcidump -X -V" as root while you are trying to connect to your phone.
Regards
Marcel
-------------------------------------------------------
This SF.Net email is sponsored by: New Crystal Reports XI. Version 11 adds new functionality designed to reduce time involved in creating, integrating, and deploying reporting solutions. Free runtime info, new features, or free trial, at: http://www.businessobjects.com/devxi/728
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
looks like the version of hcidump (1.1.2) is too old for -V, but here's what I get for -X
is there a repository I should be adding to sources.list to pull a newer on= e?=20
thanks for your help
# hcidump -X HCIDump - HCI packet analyzer ver 1.12 device: hci0 snap_len: 1028 filter: 0xffffffff < HCI Command: Create Connection (0x01|0x0005) plen 13 0000: 63 ea dc 62 12 00 18 cc 02 00 00 00 01 c..b.........
Quoted 1 line
HCI Event: Command Status (
0x0f) plen 4
0000: 00 01 05 04 ....
Quoted 1 line
HCI Event: Link Key Request (
0x17) plen 6
0000: 63 ea dc 62 12 00 c..b..
Quoted 1 line
HCI Event: Connect Complete (
0x03) plen 11
0000: 22 29 00 63 ea dc 62 12 00 01 00 ").c..b....
Quoted 54 lines · Marcel Holtmann
Hi Stefan,
=20Quoted 52 lines
I had bluez + ubuntu hoary making a ppp connection over bluetooth to my 6630, just fine for a few days, by following the instructions here:
http://www.teaparty.net/technotes/blue-gprs.html
and then suddenly it broke.
now, when I do
'pppd call gprs', it just returns, the phone never prompts me to accept the connection, and no connection is made.it seems to be communicating:
rfcomm show
rfcomm0: 00:12:62:DC:EA:63 channel 1 clean root@stefvaio:~ # pppd call gprs
root@stefvaio:~ # rfcomm show
rfcomm0: 00:12:62:DC:EA:63 channel 1 config [tty-attached] root@stefvaio:~ # rfcomm show
rfcomm0: 00:12:62:DC:EA:63 channel 1 config [tty-attached] root@stefvaio:~ # rfcomm show
rfcomm0: 00:12:62:DC:EA:63 channel 1 config [tty-attached] root@stefvaio:~ # rfcomm show
rfcomm0: 00:12:62:DC:EA:63 channel 1 config [tty-attached] root@stefvaio:~ # rfcomm show
rfcomm0: 00:12:62:DC:EA:63 channel 1 config [tty-attached] root@stefvaio:~ # rfcomm show
rfcomm0: 00:12:62:DC:EA:63 channel 1 config [tty-attached] root@stefvaio:~ # rfcomm show
rfcomm0: 00:12:62:DC:EA:63 channel 1 config [tty-attached] root@stefvaio:~ # rfcomm show
rfcomm0: 00:12:62:DC:EA:63 channel 1 disconnecting [tty-attached] root@stefvaio:~ # rfcomm show
rfcomm0: 00:12:62:DC:EA:63 channel 1 closed root@stefvaio:~ #but it doesn't seem able to make the connection anymore
I did a couple of things (overexcited by the ease with which I got it working), that might have caused this.
I tried to re-pair the phone with the laptop, because I wanted to change the name of the phone. So I deleted the pairing on the phone, and then the
/etc/bluetooth/link_key. Now when I re-pair, it finds the device, but just hangs with 'waiting for stefvaio-0', and then 'says unable to pair' . The phone still works fine with another machine running OSX (and I realise you can change the name without re-pairing. woe is me)so it looks like pairing is the cause of the problem.
How do I re-pair the phone with my laptop, short of reinstalling everyt=
hing?
Quoted 10 lines
Quoted 10 lines
where should I be looking for further diagnostics?
I also changed my hcid.conf to try and get my palm sync working too, so that may have caused the problem.
I have attached the hcid.conf in case it's glaringly obvious.
This is a shame. I've waited *years* for my phone to become a decent access device, and then after a weekend I've broken it.
Quoted 12 lines
=20
show us the output of "hcidump -X -V" as root while you are trying to connect to your phone.
=20
Regards
=20
Marcel
=20
-------------------------------------------------------
This SF.Net email is sponsored by: New Crystal Reports XI. Version 11 adds new functionality designed to reduce time involved in creating, integrating, and deploying reporting solutions. Free runtime in=
fo,
Quoted 6 lines
new features, or free trial, at: http://www.businessobjects.com/devxi/728
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
-------------------------------------------------------
This SF.Net email is sponsored by: New Crystal Reports XI. Version 11 adds new functionality designed to reduce time involved in creating, integrating, and deploying reporting solutions. Free runtime info, new features, or free trial, at: http://www.businessobjects.com/devxi/728
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
Marcel Holtmann
maintainerHi Stefan,
Quoted 2 lines
looks like the version of hcidump (1.1.2) is too old for -V, but here's what I get for -X
then install a new one, because I am not going to decode the HCI parts any time again by hand.
Quoted 1 line
is there a repository I should be adding to sources.list to pull a newer one?
The source is available.
Regards
Marcel
-------------------------------------------------------
This SF.Net email is sponsored by: New Crystal Reports XI. Version 11 adds new functionality designed to reduce time involved in creating, integrating, and deploying reporting solutions. Free runtime info, new features, or free trial, at: http://www.businessobjects.com/devxi/728
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users
Quoted 7 lines · Marcel Holtmann
Hi Stefan,
=20Quoted 2 lines
looks like the version of hcidump (1.1.2) is too old for -V, but here's what I get for -X
=20
then install a new one, because I am not going to decode the HCI parts any time again by hand.
fair enough.
so I rebuilt everything from the latest sources, was running 'hcidump -X -V', and when I tried to connect this time, it was working again, and I can pair the devices ok.
so thanks for your help. I'll see how it goes over the next few days.
Quoted 2 lines
=20
Quoted 1 line
is there a repository I should be adding to sources.list to pull a newe=
r one?
Quoted 2 lines
=20
The source is available.
-------------------------------------------------------
This SF.Net email is sponsored by: New Crystal Reports XI. Version 11 adds new functionality designed to reduce time involved in creating, integrating, and deploying reporting solutions. Free runtime info, new features, or free trial, at: http://www.businessobjects.com/devxi/728
_______________________________________________
Bluez-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/bluez-users