Skip to contentSkip to conversation

devlink: add flash update overwrite mask

PATCH In review Jacob Keller 2 participants 4 messages Sep 29, 2020 – Sep 30, 2020

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

cover devlink: add flash update overwrite mask

This series implements the iproute2 side of the new DEVLINK_ATTR_FLASH_UPDATE_OVERWRITE_MASK.

This attribute is used to allow userspace to indicate what a device should do with various subsections of a flash component when updating. For example, a flash component might contain vital data such as the PCIe serial number or configuration fields such as settings that control device bootup.

The overwrite mask allows the user to specify what behavior they want when performing an update. If nothing is specified, then the update should preserve all vital fields and configuration.

By specifying "overwrite identifiers" the user requests that the flash update should overwrite any identifiers in the updated flash component with identifier values from the provided flash image.

$devlink dev flash pci/0000:af:00.0 file flash_image.bin overwrite identifiers

By specifying "overwrite settings" the user requests that the flash update should overwrite any settings in the updated flash component with setting values from the provided flash image.

$devlink dev flash pci/0000:af:00.0 file flash_image.bin overwrite settings

These options may be combined, in which case both subsections will be sent in the overwrite mask, resulting in a request to overwrite all settings and identifiers stored in the updated flash components.

$devlink dev flash pci/0000:af:00.0 file flash_image.bin overwrite settings overwrite identifiers

Jacob Keller (2):
Update kernel headers for devlink
devlink: support setting the overwrite mask

 devlink/devlink.c            | 48 ++++++++++++++++++++++++++++++++++--
 include/uapi/linux/devlink.h |  2 ++
 2 files changed, 48 insertions(+), 2 deletions(-)

base-commit: d2be31d9b671ec0b3e32f56f9c913e249ed048bd

Signature · 1 line
2.28.0.497.g54e85e7af1ac
#1 lore raw

PATCH 1/2 Update kernel headers for devlink

The recent changes to support an overwrite mask require the _BITUL macro to be included. The uapi/linux/devlink.h header did not include <linux/const> resulting in compile failures using the macros that relied upon it.

---
 include/uapi/linux/devlink.h | 2 ++
 1 file changed, 2 insertions(+)
include/uapi/linux/devlink.h +2 -0
index 39f5cadc7f07..92498c204e42 100644
@@ -13,6 +13,8 @@
 #ifndef _LINUX_DEVLINK_H_
 #define _LINUX_DEVLINK_H_
 
+#include <linux/const.h>
+
 #define DEVLINK_GENL_NAME "devlink"
 #define DEVLINK_GENL_VERSION 0x1
 #define DEVLINK_GENL_MCGRP_CONFIG_NAME "config"
Signature · 1 line
2.28.0.497.g54e85e7af1ac
#2 lore raw

PATCH 2/2 devlink: support setting the overwrite mask

In reply to Jacob Keller

Add support for specifying the overwrite sections to allow in the flash update command. This is done by adding a new "overwrite" option which can take either "settings" or "identifiers" passing the overwrite mode multiple times will combine the fields using bitwise-OR.

---
 devlink/devlink.c | 48 +++++++++++++++++++++++++++++++++++++++++++++--
 1 file changed, 46 insertions(+), 2 deletions(-)
devlink/devlink.c +46 -2
index 0374175eda3d..5cf2cd194788 100644
@@ -302,6 +302,7 @@ static void ifname_map_free(struct ifname_map *ifname_map)
 #define DL_OPT_TRAP_POLICER_BURST	BIT(36)
 #define DL_OPT_HEALTH_REPORTER_AUTO_DUMP     BIT(37)
 #define DL_OPT_PORT_FUNCTION_HW_ADDR BIT(38)
+#define DL_OPT_FLASH_OVERWRITE		BIT(39)
 
 struct dl_opts {
 	uint64_t present; /* flags of present items */
@@ -349,6 +350,7 @@ struct dl_opts {
 	uint64_t trap_policer_burst;
 	char port_function_hw_addr[MAX_ADDR_LEN];
 	uint32_t port_function_hw_addr_len;
+	uint32_t overwrite_mask;
 };
 
 struct dl {
@@ -1285,6 +1287,19 @@ eswitch_encap_mode_get(const char *typestr,
 	return 0;
 }
 
+static int flash_overwrite_section_get(const char *sectionstr, uint32_t *mask)
+{
+	if (strcmp(sectionstr, "settings") == 0) {
+		*mask |= DEVLINK_FLASH_OVERWRITE_SETTINGS;
+	} else if (strcmp(sectionstr, "identifiers") == 0) {
+		*mask |= DEVLINK_FLASH_OVERWRITE_IDENTIFIERS;
+	} else {
+		pr_err("Unknown overwrite section \"%s\"\n", sectionstr);
+		return -EINVAL;
+	}
+	return 0;
+}
+
 static int param_cmode_get(const char *cmodestr,
 			   enum devlink_param_cmode *cmode)
 {
@@ -1627,6 +1642,21 @@ static int dl_argv_parse(struct dl *dl, uint64_t o_required,
 			if (err)
 				return err;
 			o_found |= DL_OPT_FLASH_COMPONENT;
+
+		} else if (dl_argv_match(dl, "overwrite") &&
+				(o_all & DL_OPT_FLASH_OVERWRITE)) {
+			const char *sectionstr;
+
+			dl_arg_inc(dl);
+			err = dl_argv_str(dl, &sectionstr);
+			if(err)
+				return err;
+			err = flash_overwrite_section_get(sectionstr,
+							  &opts->overwrite_mask);
+			if (err)
+				return err;
+			o_found |= DL_OPT_FLASH_OVERWRITE;
+
 		} else if (dl_argv_match(dl, "reporter") &&
 			   (o_all & DL_OPT_HEALTH_REPORTER_NAME)) {
 			dl_arg_inc(dl);
@@ -1767,6 +1797,18 @@ dl_function_attr_put(struct nlmsghdr *nlh, const struct dl_opts *opts)
 	mnl_attr_nest_end(nlh, nest);
 }
 
+static void
+dl_flash_update_overwrite_put(struct nlmsghdr *nlh, const struct dl_opts *opts)
+{
+	struct nla_bitfield32 overwrite_mask;
+
+	overwrite_mask.selector = DEVLINK_SUPPORTED_FLASH_OVERWRITE_SECTIONS;
+	overwrite_mask.value = opts->overwrite_mask;
+
+	mnl_attr_put(nlh, DEVLINK_ATTR_FLASH_UPDATE_OVERWRITE_MASK,
+		     sizeof(overwrite_mask), &overwrite_mask);
+}
+
 static void dl_opts_put(struct nlmsghdr *nlh, struct dl *dl)
 {
 	struct dl_opts *opts = &dl->opts;
@@ -1854,6 +1896,8 @@ static void dl_opts_put(struct nlmsghdr *nlh, struct dl *dl)
 	if (opts->present & DL_OPT_FLASH_COMPONENT)
 		mnl_attr_put_strz(nlh, DEVLINK_ATTR_FLASH_UPDATE_COMPONENT,
 				  opts->flash_component);
+	if (opts->present & DL_OPT_FLASH_OVERWRITE)
+		dl_flash_update_overwrite_put(nlh, opts);
 	if (opts->present & DL_OPT_HEALTH_REPORTER_NAME)
 		mnl_attr_put_strz(nlh, DEVLINK_ATTR_HEALTH_REPORTER_NAME,
 				  opts->reporter_name);
@@ -1954,7 +1998,7 @@ static void cmd_dev_help(void)
 	pr_err("       devlink dev param show [DEV name PARAMETER]\n");
 	pr_err("       devlink dev reload DEV [ netns { PID | NAME | ID } ]\n");
 	pr_err("       devlink dev info [ DEV ]\n");
-	pr_err("       devlink dev flash DEV file PATH [ component NAME ]\n");
+	pr_err("       devlink dev flash DEV file PATH [ component NAME ] [ overwrite SECTION ]\n");
 }
 
 static bool cmp_arr_last_handle(struct dl *dl, const char *bus_name,
@@ -3219,7 +3263,7 @@ static int cmd_dev_flash(struct dl *dl)
 			       NLM_F_REQUEST | NLM_F_ACK);
 
 	err = dl_argv_parse_put(nlh, dl, DL_OPT_HANDLE | DL_OPT_FLASH_FILE_NAME,
-				DL_OPT_FLASH_COMPONENT);
+				DL_OPT_FLASH_COMPONENT | DL_OPT_FLASH_OVERWRITE);
 	if (err)
 		return err;
 
Signature · 1 line
2.28.0.497.g54e85e7af1ac
#3 lore raw

Re: [iproute2-next 2/2] devlink: support setting the overwrite mask

Quoted 5 lines · Jacob Keller

Add support for specifying the overwrite sections to allow in the flash update command. This is done by adding a new "overwrite" option which can take either "settings" or "identifiers" passing the overwrite mode multiple times will combine the fields using bitwise-OR.

per my last request, please roll the cover letter information into this patch log. Headers are updated by a sync, not individual patch sets making this a 1-patch set and the git log should contain the example commands and overview from the cover letter.