board: qualcomm: dragonboard820c: update readme
Subsystems (3)
PATCH 1/5 board: qualcomm: dragonboard820c: update readme
Update build instructions.
Be sure to use the u-boot-nodtb.bin image, as the Snapdragon platform prioritizes the embedded Device Tree Blob (DTB) when present, rather than the external one. The external DTB—modified by LK—is the version required by the DB820c.
--- board/qualcomm/dragonboard820c/readme.txt | 47 ++++++++++------------- 1 file changed, 21 insertions(+), 26 deletions(-)
board/qualcomm/dragonboard820c/readme.txt +21 -26
@@ -16,10 +16,7 @@ Build & Run instructions ================================================================================ -1) Install mkbootimg and dtbTool from Codeaurora: - - git://codeaurora.org/quic/kernel/skales - commit 8492547e404e969262d9070dee9bdd15668bb70f worked for me. +1) Install mkbootimg 2) Setup CROSS_COMPILE to aarch64 compiler or if you use ccache just do CROSS_COMPILE="ccache aarch64-linux-gnu-"
@@ -33,15 +30,15 @@ $ touch rd -5) Generate qualcomm device tree table with dtbTool +5) Append the dtb to the u-boot binary discarding the internal dtb. - $ dtbTool -o dt.img arch/arm/dts + $ gzip u-boot-nodtb.bin + $ cat u-boot.dtb >> u-boot-nodtb.bin.gz 6) Generate Android boot image with mkbootimg: - $ mkbootimg --kernel=u-boot-dtb.bin \ + $ mkbootimg --kernel=u-boot-nodtb.bin.gz \ --output=u-boot.img \ - --dt=dt.img \ --pagesize 4096 \ --base 0x80000000 \ --ramdisk=rd \
@@ -251,44 +248,42 @@ Wait for 5 seconds before proceeding [5300] booting linux @ 0x80080000, ramdisk @ 0x82200000 (0), tags/device tree @ 0x82000000 [5310] Jumping to kernel via monitor -U-Boot 2017.11-00145-ge895117 (Nov 29 2017 - 10:04:06 +0100) +U-Boot 2025.04-rc5-00020-g40a61ca0e7eb-dirty (Apr 07 2025 - 09:37:03 +0200) Qualcomm-DragonBoard 820C -DRAM: 3 GiB -PSCI: v1.0 -MMC: sdhci@74a4900: 0 +DRAM: 3.5 GiB (effective 3 GiB) +Core: 136 devices, 18 uclasses, devicetree: board +MMC: Bulk clocks not available (-19), trying core clock +mmc@74a4900: 0 +Loading Environment from EXT4... OK In: serial@75b0000 Out: serial@75b0000 Err: serial@75b0000 -Net: Net Initialization Skipped -No ethernet found. +Net: No ethernet found. Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc0 is current device Scanning mmc 0:1... Found /extlinux/extlinux.conf Retrieving file: /extlinux/extlinux.conf -433 bytes read in 71 ms (5.9 KiB/s) 1: nfs root - +Enter choice: 1: nfs root Retrieving file: /uImage -19397184 bytes read in 2024 ms (9.1 MiB/s) -append: root=/dev/nfs rw nfsroot=192.168.1.2:/db820c/rootfs,v3,tcp rootwait ip=dhcp consoleblank=0 console=tty0 console=ttyMSM0,115200n8 earlyprintk earlycon=msm_serial_dm,0x75b0000 androidboot.bootdevice=624000.ufshc androidboot.verifiedbootstate=orange androidboot.ver0 - +append: root=/dev/nfs rw nfsroot=192.168.1.6:/home/jramirez/Src/qualcomm-lt/db820c/rootfs,v3,tcp rootwait ip=dhcp consoleblank=0 console=tty0 console=ttyMSM0,115200n8 earlyprintk earlyco0 Retrieving file: /apq8096-db820c.dtb -38134 bytes read in 37 ms (1005.9 KiB/s) - -## Booting kernel from Legacy Image at 95000000 ... +## Booting kernel from Legacy Image at 155000000 ... Image Name: Dragonboard820c Image Type: AArch64 Linux Kernel Image (uncompressed) Data Size: 19397120 Bytes = 18.5 MiB Load Address: 80080000 Entry Point: 80080000 Verifying Checksum ... OK -## Flattened Device Tree blob at 93000000 - Booting using the fdt blob at 0x93000000 - Loading Kernel Image ... OK - Using Device Tree in place at 0000000093000000, end 000000009300c4f5 +## Flattened Device Tree blob at 148600000 + Booting using the fdt blob at 0x148600000 +Working FDT set to 148600000 + Loading Kernel Image to 80080000 + Using Device Tree in place at 0000000148600000, end 000000014860c4f5 +Working FDT set to 148600000 Starting kernel ...
Signature · 1 line
2.34.1
PATCH 2/5 clk/qcom: apq8096: fix set rate for the uart clock
The function should return a valid rate.
--- drivers/clk/qcom/clock-apq8096.c | 3 ++- 1 file changed, 2 insertions(+), 1 deletion(-)
drivers/clk/qcom/clock-apq8096.c +2 -1
@@ -87,7 +87,8 @@ static ulong apq8096_clk_set_rate(struct clk *clk, ulong rate)return clk_init_sdc (priv, rate);break ;case GCC_BLSP2_UART2_APPS_CLK :/*UART2*/ -return clk_init_uart (priv); +clk_init_uart (priv); +return 7372800 ;default :return 0 ; }
Signature · 1 line
2.34.1
PATCH 3/5 clk/qcom: apq8096: fix the sdhci clock
In reply to Jorge Ramirez-OrtizSelect the right clock for sdhci.
--- drivers/clk/qcom/clock-apq8096.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/clk/qcom/clock-apq8096.c +1 -1
@@ -83,7 +83,7 @@ static ulong apq8096_clk_set_rate(struct clk *clk, ulong rate)struct msm_clk_priv *priv =dev_get_priv (clk->dev);switch (clk->id) { -case GCC_SDCC1_APPS_CLK :/* SDC1 */ +case GCC_SDCC2_APPS_CLK :/* SDC2 */ return clk_init_sdc (priv, rate);break ;case GCC_BLSP2_UART2_APPS_CLK :/*UART2*/
Signature · 1 line
2.34.1
PATCH 4/5 clk: stub: add qcom,glink-smd-rpm
In reply to Jorge Ramirez-OrtizAdd support for the resource power manager clocks over SMD/GLINK to be stubbed.
--- drivers/clk/clk-stub.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)
drivers/clk/clk-stub.c +1 -1
@@ -14,7 +14,7 @@static const struct udevice_id nop_parent_ids[] = { { .compatible ="qcom,rpm-proc" }, { .compatible ="qcom,glink-rpm" }, - { .compatible ="qcom,rpm-sm6115" }, + { .compatible ="qcom,glink-smd-rpm" }, { } };
Signature · 1 line
2.34.1
Re: [PATCH 4/5] clk: stub: add qcom,glink-smd-rpm
Quoted 6 lines · Jorge Ramirez-Ortiz
Add support for the resource power manager clocks over SMD/GLINK to be stubbed.
Signed-off-by Jorge Ramirez-Ortiz <[email protected]>Reviewed-by Sumit Garg <[email protected]>Reviewed-by Neil Armstrong <[email protected]>
Thanks!> ---
Quoted 16 lines
drivers/clk/clk-stub.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-)drivers/clk/clk-stub.c +1
-1@@ -14,7 +14,7 @@static const struct udevice_id nop_parent_ids[] = { { .compatible ="qcom,rpm-proc" }, { .compatible ="qcom,glink-rpm" }, - { .compatible ="qcom,rpm-sm6115" }, + { .compatible ="qcom,glink-smd-rpm" }, { } };
Signature · 1 line
Caleb (they/them)
PATCH 5/5 configs: dragonboard820: updates
In reply to Jorge Ramirez-OrtizConfigure GPIO and CLK_STUBSCLK_STUBS is required for MMC initialization
--- configs/dragonboard820c_defconfig | 2 ++ 1 file changed, 2 insertions(+)
configs/dragonboard820c_defconfig +2 -0
@@ -45,4 +45,6 @@ CONFIG_PINCTRL_QCOM_APQ8096=y CONFIG_DM_PMIC=y CONFIG_PMIC_QCOM=y CONFIG_MSM_SERIAL=y +CONFIG_MSM_GPIO=y CONFIG_SPMI_MSM=y +CONFIG_CLK_STUB=y
Signature · 1 line
2.34.1
Re: [PATCH 5/5] configs: dragonboard820: updates
Quoted 5 lines · Jorge Ramirez-Ortiz
Configure GPIO and
CLK_STUBSCLK_STUBSis required for MMC initializationSigned-off-by Jorge Ramirez-Ortiz <[email protected]>Reviewed-by Neil Armstrong <[email protected]>
Quoted 14 lines
configs/dragonboard820c_defconfig | 2 ++ 1 file changed, 2 insertions(+)configs/dragonboard820c_defconfig +2
-0@@ -45,4 +45,6 @@ CONFIG_PINCTRL_QCOM_APQ8096=y CONFIG_DM_PMIC=y CONFIG_PMIC_QCOM=y CONFIG_MSM_SERIAL=y +CONFIG_MSM_GPIO=y CONFIG_SPMI_MSM=y +CONFIG_CLK_STUB=y
Signature · 1 line
Caleb (they/them)
Caleb Connolly
AppliedQuoted 8 lines · Jorge Ramirez-Ortiz
Update build instructions.
Be sure to use the u-boot-nodtb.bin image, as the Snapdragon platform prioritizes the embedded Device Tree Blob (DTB) when present, rather than the external one. The external DTB—modified by LK—is the version required by the DB820c.
[...]
Applied, thanks!
[1/5] board: qualcomm: dragonboard820c: update readme
https://source.denx.de/u-boot/custodians/u-boot-snapdragon/-/commit/805d2d4d3662 [2/5] clk/qcom: apq8096: fix set rate for the uart clock https://source.denx.de/u-boot/custodians/u-boot-snapdragon/-/commit/5cbc99a3119f [3/5] clk/qcom: apq8096: fix the sdhci clock https://source.denx.de/u-boot/custodians/u-boot-snapdragon/-/commit/ed3417741fdd [4/5] clk: stub: add qcom,glink-smd-rpm https://source.denx.de/u-boot/custodians/u-boot-snapdragon/-/commit/1a3a35c1fb35 [5/5] configs: dragonboard820: updates https://source.denx.de/u-boot/custodians/u-boot-snapdragon/-/commit/e4ffc6a32358
Best regards,
Signature · 1 line
Caleb Connolly <[email protected]>