Skip to contentSkip to conversation

Access JFFS2 partition from U-Boot

U-Boot Guillaume Spalla 2 participants 2 messages May 14, 2009 – Jun 22, 2009

lore
Share & tools
lore
#0 lore raw

Dear all,

I am new with U-Boot, and I am trying to access the content of a JFFS2 partition from u-boot.
I am working with an at91sam9263 board, with nand flash.

In u-boot, I added the #define CONFIG_CMD_JFFS2, as well as CONFIG_JFFS2_NAND_OFF, CONFIG_JFFS2_NAND_SIZE and CONFIG_JFFS2_NAND_DEV.

I then have a crash during the compilation of u-boot in the file jffs2_1pass.c, in the function get_fl_mem_nor:
jffs2_1pass.c:389: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'flash_info'
| jffs2_1pass.c:389: error: 'flash_info' undeclared (first use in this function)
| jffs2_1pass.c:389: error: (Each undeclared identifier is reported only once

| jffs2_1pass.c:389: error: for each function it appears in.)
| jffs2_1pass.c:389: error: expected expression before ']' token
| jffs2_1pass.c:390: error: 'flash_info_t' undeclared (first use in this

function)
| jffs2_1pass.c:390: error: 'flash' undeclared (first use in this function) | make[1]: *** [jffs2_1pass.o] Error 1

If I remove the #define related to JFFS2, u-boot is compiling correctly.

Does anyone already had this problem ?

Thanks in advance,

Guillaume Spalla

#1 lore raw
Quoted 20 lines · Guillaume Spalla

Dear all,

I am new with U-Boot, and I am trying to access the content of a JFFS2 partition from u-boot.
I am working with an at91sam9263 board, with nand flash.

In u-boot, I added the #define CONFIG_CMD_JFFS2, as well as CONFIG_JFFS2_NAND_OFF, CONFIG_JFFS2_NAND_SIZE and CONFIG_JFFS2_NAND_DEV.

I then have a crash during the compilation of u-boot in the file jffs2_1pass.c, in the function get_fl_mem_nor:
jffs2_1pass.c:389: error: expected '=', ',', ';', 'asm' or '__attribute__' before 'flash_info'
| jffs2_1pass.c:389: error: 'flash_info' undeclared (first use in this function)
| jffs2_1pass.c:389: error: (Each undeclared identifier is reported only once

| jffs2_1pass.c:389: error: for each function it appears in.)
| jffs2_1pass.c:389: error: expected expression before ']' token
| jffs2_1pass.c:390: error: 'flash_info_t' undeclared (first use in this
Quoted 7 lines

function)
| jffs2_1pass.c:390: error: 'flash' undeclared (first use in this function) | make[1]: *** [jffs2_1pass.o] Error 1

If I remove the #define related to JFFS2, u-boot is compiling correctly.

Does anyone already had this problem ?

Does adding #include <flash.h> to that file help?

-Scott