Skip to contentSkip to conversation

ARM: dts: qcom: msm8960: Add BAM

PATCH Applied Rudraksha Gupta 3 participants 3 messages Feb 14, 2025 – Mar 14, 2025

Subsystems (3)
lore
Share & tools
lore
#0 lore raw

PATCH v3 1/1 ARM: dts: qcom: msm8960: Add BAM

Copy bam nodes from qcom-ipq8064.dtsi and change
the reg values to match msm8960.

---
Changes in v3:
- Revert the size of sdcc{1,3} back to 0x2000
- Link to v2: https://lore.kernel.org/r/[email protected]

Changes in v2:
- Reorganize sdcc{3,1}bam to be after sdcc{3,1} respectively
- Link to v1: https://lore.kernel.org/r/[email protected]

---
 arch/arm/boot/dts/qcom/qcom-msm8960.dtsi | 28 ++++++++++++++++++++++++++--
 1 file changed, 26 insertions(+), 2 deletions(-)
arch/arm/boot/dts/qcom/qcom-msm8960.dtsi +26 -2
index 865fe7cc39511d7cb9ec5c4b12100404f77e2989..1a98a4a9a586164451e2777c53d978cf47ce3d24 100644
@@ -279,7 +279,7 @@ sdcc3: mmc@12180000 {
 			compatible = "arm,pl18x", "arm,primecell";
 			arm,primecell-periphid = <0x00051180>;
 			status = "disabled";
-			reg = <0x12180000 0x8000>;
+			reg = <0x12180000 0x2000>;
 			interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&gcc SDC3_CLK>, <&gcc SDC3_H_CLK>;
 			clock-names = "mclk", "apb_pclk";
@@ -289,13 +289,25 @@ sdcc3: mmc@12180000 {
 			max-frequency = <192000000>;
 			no-1-8-v;
 			vmmc-supply = <&vsdcc_fixed>;
+			dmas = <&sdcc3bam 2>, <&sdcc3bam 1>;
+			dma-names = "tx", "rx";
+		};
+
+		sdcc3bam: dma-controller@12182000 {
+			compatible = "qcom,bam-v1.3.0";
+			reg = <0x12182000 0x4000>;
+			interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc SDC3_H_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
 		};
 
 		sdcc1: mmc@12400000 {
 			status = "disabled";
 			compatible = "arm,pl18x", "arm,primecell";
 			arm,primecell-periphid = <0x00051180>;
-			reg = <0x12400000 0x8000>;
+			reg = <0x12400000 0x2000>;
 			interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&gcc SDC1_CLK>, <&gcc SDC1_H_CLK>;
 			clock-names = "mclk", "apb_pclk";
@@ -305,6 +317,18 @@ sdcc1: mmc@12400000 {
 			cap-sd-highspeed;
 			cap-mmc-highspeed;
 			vmmc-supply = <&vsdcc_fixed>;
+			dmas = <&sdcc1bam 2>, <&sdcc1bam 1>;
+			dma-names = "tx", "rx";
+		};
+
+		sdcc1bam: dma-controller@12402000 {
+			compatible = "qcom,bam-v1.3.0";
+			reg = <0x12402000 0x4000>;
+			interrupts = <GIC_SPI 98 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&gcc SDC1_H_CLK>;
+			clock-names = "bam_clk";
+			#dma-cells = <1>;
+			qcom,ee = <0>;
 		};
 
 		tcsr: syscon@1a400000 {

---
base-commit: ffd294d346d185b70e28b1a28abe367bbfe53c04
change-id: 20250208-expressatt-bam-d0ed9863a626

Best regards,

Signature · 1 line
Rudraksha Gupta <[email protected]>
maintainer Applied
#2 lore raw
In reply to Rudraksha Gupta
Quoted 4 lines · Rudraksha Gupta

Copy bam nodes from qcom-ipq8064.dtsi and change
the reg values to match msm8960.

Applied, thanks!

[1/1] ARM: dts: qcom: msm8960: Add BAM

      commit: 5ee449c75f49c9a6b0cbff7848f922183e7888c1

Best regards,

Signature · 1 line
Bjorn Andersson <[email protected]>