i3c: mipi-i3c-hci: fix IBI payload length calculation for final status
PATCH 1/1 i3c: mipi-i3c-hci: fix IBI payload length calculation for final status
In DMA mode, the IBI status descriptor encodes the payload using CHUNKS (number of chunks) and DATA_LENGTH (valid bytes in the last chunk). All preceding chunks are implicitly full-sized.
The current code accumulates full chunk sizes for non-final status descriptors, but for the final status descriptor it only adds DATA_LENGTH. This ignores the contribution of the preceding full chunks described by the same final status entry.
As a result, the computed IBI payload length is truncated whenever the final status spans multiple chunks. For example, with a chunk size of 4 bytes, CHUNKS=2 and DATA_LENGTH=1 should result in a total payload size of 5 bytes, but the current code reports only 1 byte.
Fix the calculation by adding the size of (CHUNKS - 1) full chunks plus DATA_LENGTH for the last chunk.
--- drivers/i3c/master/mipi-i3c-hci/dma.c | 1 + 1 file changed, 1 insertion(+)
drivers/i3c/master/mipi-i3c-hci/dma.c +1 -0
@@ -721,6 +721,7 @@ static void hci_dma_process_ibi(struct i3c_hci *hci, struct hci_rh_data *rh)if (!(ibi_status &IBI_LAST_STATUS )) { ibi_size += chunks * rh->ibi_chunk_sz; }else { + ibi_size += (chunks -1 ) * rh->ibi_chunk_sz; ibi_size +=FIELD_GET (IBI_DATA_LENGTH , ibi_status); last_ptr = ptr;break ;
---
base-commit: 6de23f81a5e08be8fbf5e8d7e9febc72a5b5f27f
change-id: 20260331-i3c-hci-dma-3aae908b4e8e
Best regards,
Signature · 1 line
Billy Tsai <[email protected]>
Quoted 14 lines · Billy Tsai
In DMA mode, the IBI status descriptor encodes the payload using CHUNKS (number of chunks) and
DATA_LENGTH(valid bytes in the last chunk). All preceding chunks are implicitly full-sized.The current code accumulates full chunk sizes for non-final status descriptors, but for the final status descriptor it only adds
DATA_LENGTH. This ignores the contribution of the preceding full chunks described by the same final status entry.As a result, the computed IBI payload length is truncated whenever the final status spans multiple chunks. For example, with a chunk size of 4 bytes, CHUNKS=2 and DATA_LENGTH=1 should result in a total payload size of 5 bytes, but the current code reports only 1 byte.
Quoted 6 lines
Fix the calculation by adding the size of (CHUNKS - 1) full chunks plus
DATA_LENGTHfor the last chunk.Fixes 9ad9a52cce28 ("i3c/master: introduce the mipi-i3c-hci driver")Signed-off-by Billy Tsai <[email protected]>---
Quoted 24 lines
drivers/i3c/master/mipi-i3c-hci/dma.c | 1 + 1 file changed, 1 insertion(+)drivers/i3c/master/mipi-i3c-hci/dma.c +1
-1@@ -721,6 +721,7 @@ static void hci_dma_process_ibi(struct i3c_hci *hci, struct hci_rh_data *rh)if (!(ibi_status &IBI_LAST_STATUS )) { ibi_size += chunks * rh->ibi_chunk_sz; }else { + ibi_size += (chunks -1 ) * rh->ibi_chunk_sz; ibi_size +=FIELD_GET (IBI_DATA_LENGTH , ibi_status); last_ptr = ptr;break ; ---base-commit:
6de23f81a5e08be8fbf5e8d7e9febc72a5b5f27f
change-id: 20260331-i3c-hci-dma-3aae908b4e8eBest regards,
--
Billy Tsai <[email protected]>
Quoted 28 lines · Billy Tsai
In DMA mode, the IBI status descriptor encodes the payload using CHUNKS (number of chunks) and
DATA_LENGTH(valid bytes in the last chunk). All preceding chunks are implicitly full-sized.The current code accumulates full chunk sizes for non-final status descriptors, but for the final status descriptor it only adds
DATA_LENGTH. This ignores the contribution of the preceding full chunks described by the same final status entry.As a result, the computed IBI payload length is truncated whenever the final status spans multiple chunks. For example, with a chunk size of 4 bytes, CHUNKS=2 and DATA_LENGTH=1 should result in a total payload size of 5 bytes, but the current code reports only 1 byte.
Fix the calculation by adding the size of (CHUNKS - 1) full chunks plus
DATA_LENGTHfor the last chunk.Fixes 9ad9a52cce28 ("i3c/master: introduce the mipi-i3c-hci driver")Signed-off-by Billy Tsai <[email protected]>--- drivers/i3c/master/mipi-i3c-hci/dma.c | 1 + 1 file changed, 1 insertion(+)drivers/i3c/master/mipi-i3c-hci/dma.c +0
-0
drivers/i3c/master/mipi-i3c-hci/dma.c static void hci_dma_process_ibi(struct i3c_hci *hci, struct hci_rh_data *rh) · line 724
Quoted 4 lines
drivers/i3c/master/mipi-i3c-hci/dma.c +1
-0@@ -721,6 +721,7 @@ static void hci_dma_process_ibi(struct i3c_hci *hci, struct hci_rh_data *rh)if (!(ibi_status &IBI_LAST_STATUS )) { ibi_size += chunks * rh->ibi_chunk_sz; }else { + ibi_size += (chunks -1 ) * rh->ibi_chunk_sz;
That assumes chunks is not 0. It would be better to defend against that possibility i.e.
if (chunks) {
ibi_size += (chunks - 1) * rh->ibi_chunk_sz;
ibi_size += FIELD_GET(IBI_DATA_LENGTH, ibi_status);
}Quoted 9 lines
drivers/i3c/master/mipi-i3c-hci/dma.c +0
-1ibi_size +=FIELD_GET (IBI_DATA_LENGTH , ibi_status); last_ptr = ptr;break ; ---base-commit:
6de23f81a5e08be8fbf5e8d7e9febc72a5b5f27f
change-id: 20260331-i3c-hci-dma-3aae908b4e8eBest regards,
Quoted 36 lines · Billy Tsai
Quoted 28 lines
In DMA mode, the IBI status descriptor encodes the payload using CHUNKS (number of chunks) and
DATA_LENGTH(valid bytes in the last chunk). All preceding chunks are implicitly full-sized.The current code accumulates full chunk sizes for non-final status descriptors, but for the final status descriptor it only adds
DATA_LENGTH. This ignores the contribution of the preceding full chunks described by the same final status entry.As a result, the computed IBI payload length is truncated whenever the final status spans multiple chunks. For example, with a chunk size of 4 bytes, CHUNKS=2 and DATA_LENGTH=1 should result in a total payload size of 5 bytes, but the current code reports only 1 byte.
Fix the calculation by adding the size of (CHUNKS - 1) full chunks plus
DATA_LENGTHfor the last chunk.Fixes 9ad9a52cce28 ("i3c/master: introduce the mipi-i3c-hci driver")Signed-off-by Billy Tsai <[email protected]>--- drivers/i3c/master/mipi-i3c-hci/dma.c | 1 + 1 file changed, 1 insertion(+)drivers/i3c/master/mipi-i3c-hci/dma.c +0
-0drivers/i3c/master/mipi-i3c-hci/dma.c static void hci_dma_process_ibi(struct i3c_hci *hci, struct hci_rh_data *rh) · line 724
Quoted 4 lines
drivers/i3c/master/mipi-i3c-hci/dma.c +1
-0@@ -721,6 +721,7 @@ static void hci_dma_process_ibi(struct i3c_hci *hci, struct hci_rh_data *rh)if (!(ibi_status &IBI_LAST_STATUS )) { ibi_size += chunks * rh->ibi_chunk_sz; }else { + ibi_size += (chunks -1 ) * rh->ibi_chunk_sz;That assumes chunks is not 0. It would be better to defend against that possibility i.e.
Quoted 5 lines
if (chunks) {
ibi_size += (chunks - 1) * rh->ibi_chunk_sz;
ibi_size += FIELD_GET(IBI_DATA_LENGTH, ibi_status);
}As expected, the value should never be 0, as this is guaranteed by the hardware.
If we add a check for 0, it may be appropriate to include a WARN_ON message to indicate unexpected hardware behavior.
Thanks
Billy Tsai
Quoted 37 lines · Billy Tsai
Quoted 36 lines · Billy Tsai
Quoted 28 lines
In DMA mode, the IBI status descriptor encodes the payload using CHUNKS (number of chunks) and
DATA_LENGTH(valid bytes in the last chunk). All preceding chunks are implicitly full-sized.The current code accumulates full chunk sizes for non-final status descriptors, but for the final status descriptor it only adds
DATA_LENGTH. This ignores the contribution of the preceding full chunks described by the same final status entry.As a result, the computed IBI payload length is truncated whenever the final status spans multiple chunks. For example, with a chunk size of 4 bytes, CHUNKS=2 and DATA_LENGTH=1 should result in a total payload size of 5 bytes, but the current code reports only 1 byte.
Fix the calculation by adding the size of (CHUNKS - 1) full chunks plus
DATA_LENGTHfor the last chunk.Fixes 9ad9a52cce28 ("i3c/master: introduce the mipi-i3c-hci driver")Signed-off-by Billy Tsai <[email protected]>--- drivers/i3c/master/mipi-i3c-hci/dma.c | 1 + 1 file changed, 1 insertion(+)drivers/i3c/master/mipi-i3c-hci/dma.c +0
-0drivers/i3c/master/mipi-i3c-hci/dma.c static void hci_dma_process_ibi(struct i3c_hci *hci, struct hci_rh_data *rh) · line 724
Quoted 4 lines
drivers/i3c/master/mipi-i3c-hci/dma.c +1
-0@@ -721,6 +721,7 @@ static void hci_dma_process_ibi(struct i3c_hci *hci, struct hci_rh_data *rh)if (!(ibi_status &IBI_LAST_STATUS )) { ibi_size += chunks * rh->ibi_chunk_sz; }else { + ibi_size += (chunks -1 ) * rh->ibi_chunk_sz;That assumes chunks is not 0. It would be better to defend against that possibility i.e.
Quoted 7 lines
Quoted 5 lines
if (chunks) { ibi_size += (chunks - 1) * rh->ibi_chunk_sz; ibi_size += FIELD_GET(IBI_DATA_LENGTH, ibi_status); }As expected, the value should never be 0, as this is guaranteed by the hardware.
Not sure the spec. actually says that anywhere.
Quoted 3 lines
If we add a check for 0, it may be appropriate to include a
WARN_ONmessage to indicate unexpected hardware behavior.
Please no. If the target driver does not get the amount of data it is expecting, then it can complain.
Quoted 43 lines
Quoted 43 lines
Quoted 42 lines
Quoted 29 lines
In DMA mode, the IBI status descriptor encodes the payload using CHUNKS (number of chunks) and
DATA_LENGTH(valid bytes in the last chunk). All preceding chunks are implicitly full-sized.The current code accumulates full chunk sizes for non-final status descriptors, but for the final status descriptor it only adds
DATA_LENGTH. This ignores the contribution of the preceding full chunks described by the same final status entry.As a result, the computed IBI payload length is truncated whenever the final status spans multiple chunks. For example, with a chunk size of 4 bytes, CHUNKS=2 and DATA_LENGTH=1 should result in a total payload size of 5 bytes, but the current code reports only 1 byte.
Fix the calculation by adding the size of (CHUNKS - 1) full chunks plus
DATA_LENGTHfor the last chunk.Fixes 9ad9a52cce28 ("i3c/master: introduce the mipi-i3c-hci driver")Signed-off-by Billy Tsai <[email protected]>--- drivers/i3c/master/mipi-i3c-hci/dma.c | 1 + 1 file changed, 1 insertion(+)drivers/i3c/master/mipi-i3c-hci/dma.c +0
-0drivers/i3c/master/mipi-i3c-hci/dma.c static void hci_dma_process_ibi(struct i3c_hci *hci, struct hci_rh_data *rh) · line 724
Quoted 4 lines
drivers/i3c/master/mipi-i3c-hci/dma.c +1
-0@@ -721,6 +721,7 @@ static void hci_dma_process_ibi(struct i3c_hci *hci, struct hci_rh_data *rh)if (!(ibi_status &IBI_LAST_STATUS )) { ibi_size += chunks * rh->ibi_chunk_sz; }else { + ibi_size += (chunks -1 ) * rh->ibi_chunk_sz;That assumes chunks is not 0. It would be better to defend against that possibility i.e.
if (chunks) { ibi_size += (chunks - 1) * rh->ibi_chunk_sz; ibi_size += FIELD_GET(IBI_DATA_LENGTH, ibi_status); }
Quoted 3 lines
Quoted 1 line
As expected, the value should never be 0, as this is guaranteed by the hardware.
Not sure the spec. actually says that anywhere.
Apologies—this assumption is too strong. I overlooked the IBI condition when no data is present. It may be implicitly understood that the CHUNKS field should be set to 0.
Quoted 6 lines
Quoted 3 lines
If we add a check for 0, it may be appropriate to include a
WARN_ONmessage to indicate unexpected hardware behavior.Please no. If the target driver does not get the amount of data it is expecting, then it can complain.
Got it. I will update the code to handle the case of 0 chunks without adding a WARN_ON message.
Best regards,
Billy Tsai