Skip to contentSkip to conversation

net: phy: aquantia: add support for AQCS109

PATCH In review Heiner Kallweit 2 participants 2 messages Feb 8, 2019

Subsystems (3)
lore
Share & tools
lore

Heiner Kallweit

author maintainer
#0 lore raw

PATCH v2 1/1 net: phy: aquantia: add support for AQCS109

From: Nikita Yushchenko <[email protected]> Add support for the AQCS109. From software point of view, it should be almost equivalent to AQR107.

v2:
- make Nikita the author
- document what I changed

---
 drivers/net/phy/aquantia.c | 12 ++++++++++++
 1 file changed, 12 insertions(+)
drivers/net/phy/aquantia.c +12 -0
index 482004efa..0f772a47a 100644
@@ -17,6 +17,7 @@
 #define PHY_ID_AQR105	0x03a1b4a2
 #define PHY_ID_AQR106	0x03a1b4d0
 #define PHY_ID_AQR107	0x03a1b4e0
+#define PHY_ID_AQCS109	0x03a1b5c2
 #define PHY_ID_AQR405	0x03a1b4b0
 
 #define MDIO_AN_TX_VEND_STATUS1			0xc800
@@ -202,6 +203,16 @@ static struct phy_driver aqr_driver[] = {
 	.ack_interrupt	= aqr_ack_interrupt,
 	.read_status	= aqr_read_status,
 },
+{
+	PHY_ID_MATCH_MODEL(PHY_ID_AQCS109),
+	.name		= "Aquantia AQCS109",
+	.features	= PHY_10GBIT_FULL_FEATURES,
+	.aneg_done	= genphy_c45_aneg_done,
+	.config_aneg    = aqr_config_aneg,
+	.config_intr	= aqr_config_intr,
+	.ack_interrupt	= aqr_ack_interrupt,
+	.read_status	= aqr_read_status,
+},
 {
 	PHY_ID_MATCH_MODEL(PHY_ID_AQR405),
 	.name		= "Aquantia AQR405",
@@ -222,6 +233,7 @@ static struct mdio_device_id __maybe_unused aqr_tbl[] = {
 	{ PHY_ID_MATCH_MODEL(PHY_ID_AQR105) },
 	{ PHY_ID_MATCH_MODEL(PHY_ID_AQR106) },
 	{ PHY_ID_MATCH_MODEL(PHY_ID_AQR107) },
+	{ PHY_ID_MATCH_MODEL(PHY_ID_AQCS109) },
 	{ PHY_ID_MATCH_MODEL(PHY_ID_AQR405) },
 	{ }
 };
Signature · 1 line
2.20.1
maintainer Reviewed-by on v2 1/1
#1 lore raw
Quoted 4 lines · Heiner Kallweit

From: Nikita Yushchenko <[email protected]> Add support for the AQCS109. From software point of view, it should be almost equivalent to AQR107.

Quoted 8 lines

v2:
- make Nikita the author
- document what I changed

Andrew