Skip to contentSkip to conversation

rpi2: u-boot misaligned operation

U-Boot Alexander von Gluck IV 2 participants 5 messages Jun 25, 2019 – Jul 17, 2019

lore
Share & tools
lore
#0 lore raw

Was rebuilding u-boot binary for the Raspberry Pi 2 (from master), and ran into the following issue:
"
U-Boot 2019.07-rc4-00179-g77f6e2dd05 (Jun 24 2019 - 14:25:14 -0500)

DRAM: 128 MiB
RPI 2 Model B (0xa21041)
MMC: sdhci at 7e300000: 0
Loading Environment from FAT... *** Warning - bad CRC, using default environment

mbox: Header response code invalid
bcm2835: Could not configure display
In: serial
Out: vidconsole
Err: vidconsole
Net: CACHE: Misaligned operation at range [07fdb6e8, 07fdb700]
CACHE: Misaligned operation at range [07fdb6e8, 07fdb700]
CACHE: Misaligned operation at range [07fdb6e8, 07fdb700]
CACHE: Misaligned operation at range [07fdb6e8, 07fdb700]
CACHE: Misaligned operation at range [07fdb6e8, 07fdb700]
CACHE: Misaligned operation at range [07fdb6e8, 07fdb700] .
.
.
"

git commit: 77f6e2dd0551d8a825bab391a1bd6b838874bcd4 Anyone seen this before?

Thanks!

-- Alex

#1 lore raw
Quoted 25 lines · Alexander von Gluck IV

Was rebuilding u-boot binary for the Raspberry Pi 2 (from master), and ran into the following issue:
"
U-Boot 2019.07-rc4-00179-g77f6e2dd05 (Jun 24 2019 - 14:25:14 -0500)

DRAM: 128 MiB
RPI 2 Model B (0xa21041)
MMC: sdhci at 7e300000: 0
Loading Environment from FAT... *** Warning - bad CRC, using default environment

mbox: Header response code invalid
bcm2835: Could not configure display
In: serial
Out: vidconsole
Err: vidconsole
Net: CACHE: Misaligned operation at range [07fdb6e8, 07fdb700]
CACHE: Misaligned operation at range [07fdb6e8, 07fdb700]
CACHE: Misaligned operation at range [07fdb6e8, 07fdb700]
CACHE: Misaligned operation at range [07fdb6e8, 07fdb700]
CACHE: Misaligned operation at range [07fdb6e8, 07fdb700]
CACHE: Misaligned operation at range [07fdb6e8, 07fdb700] .
.
.
"

Quoted 4 lines

git commit: 77f6e2dd0551d8a825bab391a1bd6b838874bcd4 Anyone seen this before?

Thanks!

Can you try to git-bisect between:
git bisect good e4afcb2876eeeddd2376c8b07808276b75862498 git bisect bad 3950f0f8563acab248214df36053bb6c57b91940

I suppose that the one I marked as good actually works. :)

Regards,
Matthias

#2 lore raw
Quoted 31 lines · Matthias Brugger
Quoted 29 lines · Alexander von Gluck IV

Was rebuilding u-boot binary for the Raspberry Pi 2 (from master), and ran into the following issue:
"
U-Boot 2019.07-rc4-00179-g77f6e2dd05 (Jun 24 2019 - 14:25:14 -0500)

DRAM: 128 MiB
RPI 2 Model B (0xa21041)
MMC: sdhci at 7e300000: 0
Loading Environment from FAT... *** Warning - bad CRC, using default environment

mbox: Header response code invalid
bcm2835: Could not configure display
In: serial
Out: vidconsole
Err: vidconsole
Net: CACHE: Misaligned operation at range [07fdb6e8, 07fdb700]
CACHE: Misaligned operation at range [07fdb6e8, 07fdb700]
CACHE: Misaligned operation at range [07fdb6e8, 07fdb700]
CACHE: Misaligned operation at range [07fdb6e8, 07fdb700]
CACHE: Misaligned operation at range [07fdb6e8, 07fdb700]
CACHE: Misaligned operation at range [07fdb6e8, 07fdb700] .
.
.
"

git commit: 77f6e2dd0551d8a825bab391a1bd6b838874bcd4 Anyone seen this before?

Quoted 7 lines
Quoted 1 line

Thanks!

Can you try to git-bisect between:
git bisect good e4afcb2876eeeddd2376c8b07808276b75862498 git bisect bad 3950f0f8563acab248214df36053bb6c57b91940

I suppose that the one I marked as good actually works. :)

e4afcb2876eeeddd2376c8b07808276b75862498 is actually bad. 7e2ae620e15ef578b8f2812ec21ec07fae6c1e2f is bad (3 months ago) 91e1bc53c4b61cd7b871d485f4c136084245e9a2 is bad

I can't build before 91e1bc53c4b61cd7b871d485f4c136084245e9a2 due to libfdt incompatibilities :-|

*however* I found an old u-boot for the rpi2 build in 2017 (which i'm pretty sure worked) (ebca2083d3689c77c7d1365f1e6862b55abef8a2)

U-Boot 2017.11-00023-gebca2083d3 (Nov 17 2017 - 09:00:41 -0600)

DRAM: 128 MiB
RPI 2 Model B (0xa21041)
MMC: sdhci at 7e300000: 0
*** Warning - bad CRC, using default environment

mbox: Header response code invalid
bcm2835: Could not configure display
In:    serial
Out:   vidconsole
Err:   vidconsole
Net:   CACHE: Misaligned operation at range [07fb3f64, 07fb3f80]
CACHE: Misaligned operation at range [07fb3f64, 07fb3f80]
CACHE: Misaligned operation at range [07fb3f64, 07fb3f80]
CACHE: Misaligned operation at range [07fb3f64, 07fb3f80]
CACHE: Misaligned operation at range [07fb3f64, 07fb3f80]
CACHE: Misaligned operation at range [07fb3f64, 07fb3f80]
CACHE: Misaligned operation at range [07fb3f64, 07fb3f80]

This one was even built with our own toolchain before we began to rely on host toolchains.

The big difference in the room is the pre-u-boot loaders from the pi foundation. We're using their latest:

https://github.com/raspberrypi/firmware/tree/master/boot

I reverted bootloader.bin and start.elf from 2017:
https://github.com/raspberrypi/firmware/blob/dc93c7922bb31f20759a94a6e000299da8e331e3/boot/start.elf
https://github.com/raspberrypi/firmware/blob/dc93c7922bb31f20759a94a6e000299da8e331e3/boot/bootcode.bin

And it now works :-|

-- Alex

#3 lore raw
Quoted 78 lines · Alexander von Gluck IV
Quoted 31 lines · Matthias Brugger
Quoted 29 lines · Alexander von Gluck IV

Was rebuilding u-boot binary for the Raspberry Pi 2 (from master), and ran into the following issue:
"
U-Boot 2019.07-rc4-00179-g77f6e2dd05 (Jun 24 2019 - 14:25:14 -0500)

DRAM: 128 MiB
RPI 2 Model B (0xa21041)
MMC: sdhci at 7e300000: 0
Loading Environment from FAT... *** Warning - bad CRC, using default environment

mbox: Header response code invalid
bcm2835: Could not configure display
In: serial
Out: vidconsole
Err: vidconsole
Net: CACHE: Misaligned operation at range [07fdb6e8, 07fdb700]
CACHE: Misaligned operation at range [07fdb6e8, 07fdb700]
CACHE: Misaligned operation at range [07fdb6e8, 07fdb700]
CACHE: Misaligned operation at range [07fdb6e8, 07fdb700]
CACHE: Misaligned operation at range [07fdb6e8, 07fdb700]
CACHE: Misaligned operation at range [07fdb6e8, 07fdb700] .
.
.
"

git commit: 77f6e2dd0551d8a825bab391a1bd6b838874bcd4 Anyone seen this before?

Quoted 7 lines
Quoted 1 line

Thanks!

Can you try to git-bisect between:
git bisect good e4afcb2876eeeddd2376c8b07808276b75862498 git bisect bad 3950f0f8563acab248214df36053bb6c57b91940

I suppose that the one I marked as good actually works. :)

e4afcb2876eeeddd2376c8b07808276b75862498 is actually bad. 7e2ae620e15ef578b8f2812ec21ec07fae6c1e2f is bad (3 months ago) 91e1bc53c4b61cd7b871d485f4c136084245e9a2 is bad

I can't build before 91e1bc53c4b61cd7b871d485f4c136084245e9a2 due to libfdt incompatibilities :-|

*however* I found an old u-boot for the rpi2 build in 2017 (which i'm pretty sure worked) (ebca2083d3689c77c7d1365f1e6862b55abef8a2)

U-Boot 2017.11-00023-gebca2083d3 (Nov 17 2017 - 09:00:41 -0600)

DRAM: 128 MiB
RPI 2 Model B (0xa21041)
MMC: sdhci at 7e300000: 0
*** Warning - bad CRC, using default environment

mbox: Header response code invalid
bcm2835: Could not configure display
In: serial
Out: vidconsole
Err: vidconsole
Net: CACHE: Misaligned operation at range [07fb3f64, 07fb3f80]
CACHE: Misaligned operation at range [07fb3f64, 07fb3f80]
CACHE: Misaligned operation at range [07fb3f64, 07fb3f80]
CACHE: Misaligned operation at range [07fb3f64, 07fb3f80]
CACHE: Misaligned operation at range [07fb3f64, 07fb3f80]
CACHE: Misaligned operation at range [07fb3f64, 07fb3f80]
CACHE: Misaligned operation at range [07fb3f64, 07fb3f80]

This one was even built with our own toolchain before we began to rely on host toolchains.

The big difference in the room is the pre-u-boot loaders from the pi foundation. We're using their latest:

Quoted 8 lines

https://github.com/raspberrypi/firmware/tree/master/boot

I reverted bootloader.bin and start.elf from 2017:
https://github.com/raspberrypi/firmware/blob/dc93c7922bb31f20759a94a6e000299da8e331e3/boot/start.elf
https://github.com/raspberrypi/firmware/blob/dc93c7922bb31f20759a94a6e000299da8e331e3/boot/bootcode.
in

And it now works :-|

Raised to the Raspberry Pi folks here:
https://github.com/raspberrypi/firmware/issues/1164

Maybe they'll have some insight.

#4 lore raw
Quoted 86 lines · Alexander von Gluck IV
Quoted 85 lines · Alexander von Gluck IV
Quoted 31 lines · Matthias Brugger
Quoted 29 lines · Alexander von Gluck IV

Was rebuilding u-boot binary for the Raspberry Pi 2 (from master), and ran into the following issue:
"
U-Boot 2019.07-rc4-00179-g77f6e2dd05 (Jun 24 2019 - 14:25:14 -0500)

DRAM: 128 MiB
RPI 2 Model B (0xa21041)
MMC: sdhci at 7e300000: 0
Loading Environment from FAT... *** Warning - bad CRC, using default environment

mbox: Header response code invalid
bcm2835: Could not configure display
In: serial
Out: vidconsole
Err: vidconsole
Net: CACHE: Misaligned operation at range [07fdb6e8, 07fdb700]
CACHE: Misaligned operation at range [07fdb6e8, 07fdb700]
CACHE: Misaligned operation at range [07fdb6e8, 07fdb700]
CACHE: Misaligned operation at range [07fdb6e8, 07fdb700]
CACHE: Misaligned operation at range [07fdb6e8, 07fdb700]
CACHE: Misaligned operation at range [07fdb6e8, 07fdb700] .
.
.
"

git commit: 77f6e2dd0551d8a825bab391a1bd6b838874bcd4 Anyone seen this before?

Quoted 7 lines
Quoted 1 line

Thanks!

Can you try to git-bisect between:
git bisect good e4afcb2876eeeddd2376c8b07808276b75862498 git bisect bad 3950f0f8563acab248214df36053bb6c57b91940

I suppose that the one I marked as good actually works. :)

e4afcb2876eeeddd2376c8b07808276b75862498 is actually bad. 7e2ae620e15ef578b8f2812ec21ec07fae6c1e2f is bad (3 months ago) 91e1bc53c4b61cd7b871d485f4c136084245e9a2 is bad

I can't build before 91e1bc53c4b61cd7b871d485f4c136084245e9a2 due to libfdt incompatibilities :-|

*however* I found an old u-boot for the rpi2 build in 2017 (which i'm pretty sure worked) (ebca2083d3689c77c7d1365f1e6862b55abef8a2)

U-Boot 2017.11-00023-gebca2083d3 (Nov 17 2017 - 09:00:41 -0600)

DRAM: 128 MiB
RPI 2 Model B (0xa21041)
MMC: sdhci at 7e300000: 0
*** Warning - bad CRC, using default environment

mbox: Header response code invalid
bcm2835: Could not configure display
In: serial
Out: vidconsole
Err: vidconsole
Net: CACHE: Misaligned operation at range [07fb3f64, 07fb3f80]
CACHE: Misaligned operation at range [07fb3f64, 07fb3f80]
CACHE: Misaligned operation at range [07fb3f64, 07fb3f80]
CACHE: Misaligned operation at range [07fb3f64, 07fb3f80]
CACHE: Misaligned operation at range [07fb3f64, 07fb3f80]
CACHE: Misaligned operation at range [07fb3f64, 07fb3f80]
CACHE: Misaligned operation at range [07fb3f64, 07fb3f80]

This one was even built with our own toolchain before we began to rely on host toolchains.

The big difference in the room is the pre-u-boot loaders from the pi foundation. We're using their latest:

https://github.com/raspberrypi/firmware/tree/master/boot

I reverted bootloader.bin and start.elf from 2017:
https://github.com/raspberrypi/firmware/blob/dc93c7922bb31f20759a94a6e000299da8e331e3/boot/start.elf
https://github.com/raspberrypi/firmware/blob/dc93c7922bb31f20759a94a6e000299da8e331e3/boot/bootcode.
in

Quoted 7 lines
Quoted 1 line

And it now works :-|

Raised to the Raspberry Pi folks here:
https://github.com/raspberrypi/firmware/issues/1164

Maybe they'll have some insight.

That should be fixed in newer versions of the firmware. Another possibility is to try this patch on top of your u-boot:
https://patchwork.ozlabs.org/patch/1130837/

Regards,
Matthias