Regression in 3735ba8db8e6ea22ad3ff524328926d8d780a884 with Freescale P1020
Subsystems (2)
Hi,
I'm running OpenWRT Kernel 3.8.3 (which already has f66dea709cd9309b2ee9f715697818001fb518de and 5ed338778f917a035f0f0a52327fc4f72e36f7a1 applied) on a P1020WLAN (QorlQ, PPC) device.
Before updating the kernel from 3.3.0, USB host support was working fine. Now I get "fsl-ehci: USB PHY clock invalid" messages in dmesg and the lsusb output is empty, so USB host support is not working. When I apply the following patch, USB host support starts working again, so I guess 3735ba8db8e6ea22ad3ff524328926d8d780a884 is the cause.
Regards,
M. Braun
drivers/usb/host/ehci-fsl.c 2013-04-15 21:13:57.572410838 +0200 renamed from drivers/usb/host/ehci-fsl.c 2013-04-15 21:13:52.924403077 +0200 +0 -0
@@ -273,7 +273,6 @@ static int ehci_fsl_setup_phy(struct usb if (!spin_event_timeout(in_be32(non_ehci +
FSL_SOC_USB_CTRL) &
PHY_CLK_VALID, FSL_USB_PHY_CLK_TIMEOUT,
0)) {
printk(KERN_WARNING "fsl-ehci: USB PHY clock
invalid\n");
- return -EINVAL;
}
}Alan Stern
maintainerQuoted 11 lines · Michael Braun
Hi,
I'm running OpenWRT Kernel 3.8.3 (which already has
f66dea709cd9309b2ee9f715697818001fb518deand5ed338778f917a035f0f0a52327fc4f72e36f7a1applied) on a P1020WLAN (QorlQ, PPC) device.
Before updating the kernel from 3.3.0, USB host support was working fine. Now I get "fsl-ehci: USB PHY clock invalid" messages in dmesg and the lsusb output is empty, so USB host support is not working. When I apply the following patch, USB host support starts working again, so I guess3735ba8db8e6ea22ad3ff524328926d8d780a884is the cause.
Why didn't you CC: the author of that commit? Isn't he the person most likely to be able to fix it?
Alan Stern