mtd: spi-nor-ids: Add support for W25Q512JV
PATCH 1/1 mtd: spi-nor-ids: Add support for W25Q512JV
Add support for Winbond W25Q512JV 64MB SPI NOR flash.
https://www.digikey.com/en/product-highlight/w/winbond/w25q512jv-512-mb-serial-flash-memory
--- drivers/mtd/spi/spi-nor-ids.c | 5 +++++ 1 file changed, 5 insertions(+)
drivers/mtd/spi/spi-nor-ids.c +5 -0
@@ -355,6 +355,11 @@ const struct flash_info spi_nor_ids[] = {SECT_4K |SPI_NOR_DUAL_READ |SPI_NOR_QUAD_READ | SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) }, + { +INFO ("w25q512jv" ,0xef7020 ,0 ,64 *1024 ,1024 , +SECT_4K |SPI_NOR_DUAL_READ |SPI_NOR_QUAD_READ | +SPI_NOR_HAS_LOCK |SPI_NOR_HAS_TB ) + }, { INFO("w25q01jv", 0xef4021, 0, 64 * 1024, 2048, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
Signature · 1 line
2.25.1
Quoted 15 lines · Dhananjay Phadke
Add support for Winbond W25Q512JV 64MB SPI NOR flash.
https://www.digikey.com/en/product-highlight/w/winbond/w25q512jv-512-mb-serial-flash-memory
Signed-off-by Dhananjay Phadke <[email protected]>--- drivers/mtd/spi/spi-nor-ids.c | 5 +++++ 1 file changed, 5 insertions(+)drivers/mtd/spi/spi-nor-ids.c +0
-0@@ -355,6 +355,11 @@ const struct flash_info spi_nor_ids[] = { SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
drivers/mtd/spi/spi-nor-ids.c const struct flash_info spi_nor_ids[] = { · line 365
Quoted 10 lines
drivers/mtd/spi/spi-nor-ids.c +5
-0SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) }, + { +INFO ("w25q512jv" ,0xef7020 ,0 ,64 *1024 ,1024 , +SECT_4K |SPI_NOR_DUAL_READ |SPI_NOR_QUAD_READ | +SPI_NOR_HAS_LOCK |SPI_NOR_HAS_TB ) + }, { INFO("w25q01jv", 0xef4021, 0, 64 * 1024, 2048, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
Will send v2 to use "w25q512jvm" name to be consistent with other DTR parts.
Regards,
Dhananjay
Hi Dhananjay,
Quoted 1 line · Dhananjay Phadke
Will send v2 to use "w25q512jvm" name to be consistent with other DTR parts.
Any follow-up on this?
regards,
Jaap Crezee
Quoted 6 lines · Jaap Crezee
Hi Dhananjay,
Quoted 1 line · Dhananjay Phadke
Will send v2 to use "w25q512jvm" name to be consistent with other DTR parts.
Any follow-up on this?
Hi Jaap,
I didn't get hold of the system with that flash part to collect SFDP output for Linux submission first, then will update u-boot if it's not there already.
Regards,
Dhananjay