Skip to contentSkip to conversation

RTS/CTS exchanges do not follow the RTS threshold

DISCUSSION Okhwan Lee 2 participants 2 messages Oct 3, 2014 Qualcomm Atheros ATH10K wireless driver

lore
Share & tools
lore

Okhwan Lee

author
#0 lore raw

 Hi all,

As stated in the standard, if PSDU size is larger then the RTS threshold,
the PSDU follows RTS/CTS exchange.
However, based on our measurement, the RTS/CTS exchanges is decided based on the MSDU size.
If A-MPDU is aggregated with multiple 1000 byte MPDUs, the A-MPDU is transmitted without RTS/CTS even if RTS threshold is set to 2347.

Additionaly, is there any function called when RTS or CTS received in ath10k or ath? Or RTS/CTS exchange is done by the firmware?

backport version: 3.16.1
firmware version: firmware-2.bin_10.1.467.2-1

—
Okhwan Lee,
Multimedia & Wireless Networking Lab. (MWNL),
Seoul National University (SNU).

Tel: +82-2-880-1755
Cell: +82-10-4632-1980
URL: http://mwnl.snu.ac.kr/~ohlee

_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k

#1 lore raw
Quoted 10 lines · Okhwan Lee

Hi all,

As stated in the standard, if PSDU size is larger then the RTS threshold,
the PSDU follows RTS/CTS exchange.
However, based on our measurement, the RTS/CTS exchanges is decided based on the MSDU size.
If A-MPDU is aggregated with multiple 1000 byte MPDUs, the A-MPDU is transmitted without RTS/CTS even if RTS threshold is set to 2347.

Additionaly, is there any function called when RTS or CTS received in ath10k or ath? Or RTS/CTS exchange is done by the firmware?

RTS/CTS is controlled by firmware. ath10k just sets the threshold parameter.

Michał

_______________________________________________
ath10k mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/ath10k