ARM: mach-at91: fix timer.o compile condition
PATCH 1/1 ARM: mach-at91: fix timer.o compile condition
The AT91 architecture now has two possible timer blocks, the old PIT timer and the new PIT64B.
The timer.c file has an old non DM driver that works for platforms that do not use the ATMEL_PIT_TIMER DM-based driver.
Update the Makefile to select this old driver in case neither of the ATMEL_PIT_TIMER and the MCHP_PIT64B_TIMER are selected.
--- arch/arm/mach-at91/armv7/Makefile | 5 ++++- 1 file changed, 4 insertions(+), 1 deletion(-)
arch/arm/mach-at91/armv7/Makefile +4 -1
@@ -12,6 +12,9 @@ obj-$(CONFIG_SAMA5D4) += sama5d4_devices.o clock.o obj-$(CONFIG_SAMA7G5) += sama7g5_devices.o obj-y += cpu.o obj-y += reset.o -ifeq ($(CONFIG_ATMEL_PIT_TIMER),) +ifneq ($(CONFIG_ATMEL_PIT_TIMER),y) +ifneq ($(CONFIG_MCHP_PIT64B_TIMER),y) +# old non-DM timer driver obj-y += timer.o endif +endif
Signature · 1 line
2.25.1
PATCH 1/1 ARM: mach-at91: fix timer.o compile condition
Quoted 10 lines · Eugen Hristev
The AT91 architecture now has two possible timer blocks, the old PIT timer and the new PIT64B.
Thetimer.cfile has an old non DM driver that works for platforms that do not use theATMEL_PIT_TIMERDM-based driver.
Update theMakefileto select this old driver in case neither of theATMEL_PIT_TIMERand theMCHP_PIT64B_TIMERare selected.Suggested-by Claudiu Beznea <[email protected]>Signed-off-by Eugen Hristev <[email protected]>---
Applied to u-boot-atmel/master