lvm2 pv failure
Hello-
I had one of the two drives in my LVM2 array fail. It was the first drive. Is it possiable that any data on the second drive could be recovered? Or have I lost all my data on both drives?
.Ukiah Smith
Signature · 2 lines
"Well done is better than well said."
- Benjamin Franklin (1706-1790)All the logical volumes on the remaining drive should be recoverable. If you striped the two devices, you'll probably be hurting. If the 1st hard drive is only partially failed (some sectors fail, others don't), then you should be able to retrieve most of that data too.
brassow
Quoted 18 lines · On Apr 5, 2006, at 6:26 PM, Uk1ah Sm1th wrote:
Hello-
I had one of the two drives in my LVM2 array fail. It was the first drive. Is it possiable that any data on the second drive could be recovered? Or have I lost all my data on both drives?
.Ukiah Smith
Signature · 8 lines
"Well done is better than well said." - Benjamin Franklin (1706-1790) _______________________________________________ linux-lvm mailing list [email protected] https://www.redhat.com/mailman/listinfo/linux-lvm read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/
Jon:
How would you recover this? Just curious....
Quoted 35 lines · Jonathan E Brassow
All the logical volumes on the remaining drive should be recoverable. If you striped the two devices, you'll probably be hurting. If the 1st hard drive is only partially failed (some sectors fail, others don't), then you should be able to retrieve most of that data too.
brassow
Quoted 12 lines · On Apr 5, 2006, at 6:26 PM, Uk1ah Sm1th wrote:
Hello-
I had one of the two drives in my LVM2 array fail. It was the first drive. Is it possiable that any data on the second drive could be recovered? Or have I lost all my data on both drives?
.Ukiah Smith
--
"Well done is better than well said."
- Benjamin Franklin (1706-1790)Quoted 6 lines
_______________________________________________
linux-lvm mailing list
[email protected]
https://www.redhat.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/_______________________________________________
linux-lvm mailing list
[email protected]
https://www.redhat.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/
You could stuff in a new drive and 'dd' the contents of the failed drive to the new drive (if the drive hasn't completely failed) using the "noerror" option.
Now you might be able to (shutdown) pull the bad drive and reboot.
So far, you've risked nothing. I'd see how this goes before trying other things (like editing the lvm labels directly).
brassow
Quoted 38 lines · Mag Gam
Jon:
How would you recover this? Just curious....
On 4/6/06, Jonathan E Brassow <[email protected] > wrote:All the logical volumes on the remaining drive should be recoverable.
Quoted 27 lines
If you striped the two devices, you'll probably be hurting. If the 1st hard drive is only partially failed (some sectors fail, others don't), then you should be able to retrieve most of that data too.
brassow
Quoted 12 lines · On Apr 5, 2006, at 6:26 PM, Uk1ah Sm1th wrote:
Hello-
I had one of the two drives in my LVM2 array fail. It was the first drive. Is it possiable that any data on the second drive could be recovered? Or have I lost all my data on both drives?
.Ukiah Smith
--
"Well done is better than well said."
- Benjamin Franklin (1706-1790)Quoted 6 lines
_______________________________________________
linux-lvm mailing list
[email protected]
https://www.redhat.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/Quoted 5 lines
_______________________________________________
linux-lvm mailing list
[email protected]
https://www.redhat.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/
Quoted 5 lines
_______________________________________________
linux-lvm mailing list
[email protected]
https://www.redhat.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/
You could stuff in a new drive and 'dd' the contents of the failed drive to the new drive (if the drive hasn't completely failed) using the "noerror" option.
Now you might be able to (shutdown) pull the bad drive and reboot.
So far, you've risked nothing. I'd see how this goes before trying other things (like editing the lvm labels directly).
brassow
On Apr 24, 2006, at 4:36 PM, Mag Gam wrote:
<excerpt>Jon:
How would you recover this? Just curious....
On 4/6/06, <bold>Jonathan E Brassow</bold> <<<color><param>0000,0000,EEEE</param>[email protected]</color> > wrote:All the logical volumes on the remaining drive should be recoverable.
<excerpt>If you striped the two devices, you'll probably be hurting. If the 1st
hard drive is only partially failed (some sectors fail, others don't),
then you should be able to retrieve most of that data too.
brassow
Quoted 24 lines · On Apr 5, 2006, at 6:26 PM, Uk1ah Sm1th wrote:
Hello-
I had one of the two drives in my LVM2 array fail. It was the first
drive. Is it possiable that any data on the second drive could be
recovered? Or have I lost all my data on both drives?
.Ukiah Smith
--
"Well done is better than well said."
- Benjamin Franklin (1706-1790)
Quoted 7 lines
_______________________________________________
linux-lvm mailing list
<color><param>0000,0000,EEEE</param>[email protected]</color>
<color><param>0000,0000,EEEE</param>https://www.redhat.com/mailman/listinfo/linux-lvm</color>
Quoted 1 line
read the LVM HOW-TO at
<color><param>0000,0000,EEEE</param>http://tldp.org/HOWTO/LVM-HOWTO/</color>
Quoted 1 line
_______________________________________________
linux-lvm mailing list
<color><param>0000,0000,EEEE</param> [email protected]</color>
<color><param>0000,0000,EEEE</param>https://www.redhat.com/mailman/listinfo/linux-lvm</color>
read the LVM HOW-TO at <color><param>0000,0000,EEEE</param>http://tldp.org/HOWTO/LVM-HOWTO/ </color>
</excerpt>_______________________________________________
linux-lvm mailing list
https://www.redhat.com/mailman/listinfo/linux-lvm
read the LVM HOW-TO at http://tldp.org/HOWTO/LVM-HOWTO/</excerpt>