Skip to contentSkip to conversation

Cold Reset IGT Test

PATCH Superseded Anshuman Gupta 6 participants 27 messages Nov 23, 2022 – Dec 7, 2022

Subsystems (2)

v3 of 4 Superseded Latest is v4 →

lore
Share & tools
lore
#0 lore raw

v3 cover Cold Reset IGT Test

Adding Cold Reset IGT support

v3:
- Address the review comment from Aravind.

Anshuman Gupta (5):
lib/igt_pci: helpers to get PCI capabilities offset lib/igt_pci: Add PCIe slot cap
lib/igt_pm: Refactor get firmware_node fd test/device_reset: Refactor initiate_device_reset tests/device_reset: Add cold reset IGT test

 lib/igt_pci.c        |  44 ++++++++++++
 lib/igt_pci.h        |  35 +++++++++
 lib/igt_pm.c         |  76 +++++++++++++++++---
 lib/igt_pm.h         |   1 +
 lib/meson.build      |   1 +
 tests/device_reset.c | 167 +++++++++++++++++++++++++++++++++++++++----
 6 files changed, 300 insertions(+), 24 deletions(-)
 create mode 100644 lib/igt_pci.c
 create mode 100644 lib/igt_pci.h
Signature · 1 line
2.25.1
#1 lore raw

PATCH v3 1/5 lib/igt_pci: helpers to get PCI capabilities offset

Added helper functions to search for PCI capabilities with help of libpciaccess library.

---
 lib/igt_pci.c   | 44 ++++++++++++++++++++++++++++++++++++++++++++
 lib/igt_pci.h   | 32 ++++++++++++++++++++++++++++++++
 lib/meson.build |  1 +
 3 files changed, 77 insertions(+)
 create mode 100644 lib/igt_pci.c
 create mode 100644 lib/igt_pci.h
lib/igt_pci.c new file +44 -0
new file mode 100644
index 0000000000..bc0369341d
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: MIT
+/*
+ * Copyright © 2022 Intel Corporation
+ */
+
+#include <pciaccess.h>
+#include "igt_pci.h"
+
+/**
+ * find_pci_cap_offset:
+ * @dev: pci device
+ * @cap_id: searched capability id, 0 means any capability
+ * @start_offset: offset in config space from which we start searching
+ *
+ * return:
+ * -1 on config read error, 0 if capability is not found,
+ * otherwise offset at which capability with cap_id is found
+ */
+int find_pci_cap_offset_at(struct pci_device *dev, enum pci_cap_id cap_id,
+			   int start_offset)
+{
+	uint8_t offset;
+	uint16_t cap_header;
+	int loop = (PCI_CFG_SPACE_SIZE - PCI_TYPE0_1_HEADER_SIZE)
+			/ sizeof(cap_header);
+
+	if (pci_device_cfg_read_u8(dev, &offset, start_offset))
+		return -1;
+
+	while (loop--) {
+		if (offset < PCI_TYPE0_1_HEADER_SIZE)
+			break;
+
+		if (pci_device_cfg_read_u16(dev, &cap_header, (offset & 0xFC)))
+			return -1;
+
+		if (!cap_id || cap_id == (cap_header & 0xFF))
+			return offset;
+
+		offset = cap_header >> 8;
+	}
+
+	return 0;
+}
lib/igt_pci.h new file +32 -0
new file mode 100644
index 0000000000..68afd2dacb
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: MIT
+/*
+ * Copyright © 2022 Intel Corporation
+ */
+
+#ifndef __IGT_PCI_H__
+#define __IGT_PCI_H__
+
+#include <stdint.h>
+#include <endian.h>
+
+/* forward declaration */
+struct pci_device;
+
+#define PCI_TYPE0_1_HEADER_SIZE 0x40
+#define PCI_CAPS_START 0x34
+#define PCI_CFG_SPACE_SIZE 0x100
+#define PCIE_CFG_SPACE_SIZE 0x1000
+
+enum pci_cap_id {
+	PCI_EXPRESS_CAP_ID = 0x10
+};
+
+int find_pci_cap_offset_at(struct pci_device *dev, enum pci_cap_id cap_id,
+			   int start_offset);
+
+static inline int find_pci_cap_offset(struct pci_device *dev, enum pci_cap_id cap_id)
+{
+	return find_pci_cap_offset_at(dev, cap_id, PCI_CAPS_START);
+}
+
+#endif
lib/meson.build +1 -0
index cef2d0ff3d..e0fb7ddfed 100644
@@ -33,6 +33,7 @@ lib_sources = [
 	'igt_pipe_crc.c',
 	'igt_power.c',
 	'igt_primes.c',
+	'igt_pci.c',
 	'igt_rand.c',
 	'igt_stats.c',
 	'igt_syncobj.c',
Signature · 1 line
2.25.1
#2 lore raw

Re: [igt-dev] [PATCH i-g-t v3 1/5] lib/igt_pci: helpers to get PCI capabilities offset

Hi Anshuman,

Quoted 51 lines · Anshuman Gupta

Added helper functions to search for PCI capabilities with help of libpciaccess library.

---
  lib/igt_pci.c   | 44 ++++++++++++++++++++++++++++++++++++++++++++
  lib/igt_pci.h   | 32 ++++++++++++++++++++++++++++++++
  lib/meson.build |  1 +
  3 files changed, 77 insertions(+)

create mode 100644 lib/igt_pci.c
create mode 100644 lib/igt_pci.h

lib/igt_pci.c new file +30 -0
new file mode 100644
index 0000000000..bc0369341d
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: MIT
+/*
+ * Copyright © 2022 Intel Corporation
+ */
+
+#include <pciaccess.h>
+#include "igt_pci.h"
+
+/**
+ * find_pci_cap_offset:
+ * @dev: pci device
+ * @cap_id: searched capability id, 0 means any capability
+ * @start_offset: offset in config space from which we start searching
+ *
+ * return:
+ * -1 on config read error, 0 if capability is not found,
+ * otherwise offset at which capability with cap_id is found
+ */
+int find_pci_cap_offset_at(struct pci_device *dev, enum pci_cap_id cap_id,
+			   int start_offset)
+{
+	uint8_t offset;
+	uint16_t cap_header;
+	int loop = (PCI_CFG_SPACE_SIZE - PCI_TYPE0_1_HEADER_SIZE)
+			/ sizeof(cap_header);
+
+	if (pci_device_cfg_read_u8(dev, &offset, start_offset))
+		return -1;
+
+	while (loop--) {

lib/igt_pci.c line 40

Quoted 10 lines
lib/igt_pci.c new file +10 -0
+		if (offset < PCI_TYPE0_1_HEADER_SIZE)
+			break;
+
+		if (pci_device_cfg_read_u16(dev, &cap_header, (offset & 0xFC)))
+			return -1;
+
+		if (!cap_id || cap_id == (cap_header & 0xFF))
+			return offset;
+
+		offset = cap_header >> 8;

For the last capability, next capability address will always be 0. So above instead of using while(loop--) we can use while(offset).

Regards,
Badal

Quoted 54 lines
lib/igt_pci.c new file +4 -0
+	}
+
+	return 0;
+}
lib/igt_pci.h new file +32 -0
new file mode 100644
index 0000000000..68afd2dacb
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: MIT
+/*
+ * Copyright © 2022 Intel Corporation
+ */
+
+#ifndef __IGT_PCI_H__
+#define __IGT_PCI_H__
+
+#include <stdint.h>
+#include <endian.h>
+
+/* forward declaration */
+struct pci_device;
+
+#define PCI_TYPE0_1_HEADER_SIZE 0x40
+#define PCI_CAPS_START 0x34
+#define PCI_CFG_SPACE_SIZE 0x100
+#define PCIE_CFG_SPACE_SIZE 0x1000
+
+enum pci_cap_id {
+	PCI_EXPRESS_CAP_ID = 0x10
+};
+
+int find_pci_cap_offset_at(struct pci_device *dev, enum pci_cap_id cap_id,
+			   int start_offset);
+
+static inline int find_pci_cap_offset(struct pci_device *dev, enum pci_cap_id cap_id)
+{
+	return find_pci_cap_offset_at(dev, cap_id, PCI_CAPS_START);
+}
+
+#endif
lib/meson.build +1 -0
index cef2d0ff3d..e0fb7ddfed 100644
@@ -33,6 +33,7 @@ lib_sources = [
  	'igt_pipe_crc.c',
  	'igt_power.c',
  	'igt_primes.c',
+	'igt_pci.c',
  	'igt_rand.c',
  	'igt_stats.c',
  	'igt_syncobj.c',
#3 lore raw

Re: [igt-dev] [PATCH i-g-t v3 1/5] lib/igt_pci: helpers to get PCI capabilities offset

Hi,

Quoted 67 lines · Badal

Hi Anshuman,

Quoted 51 lines · Anshuman Gupta

Added helper functions to search for PCI capabilities with help of libpciaccess library.

---
  lib/igt_pci.c   | 44 ++++++++++++++++++++++++++++++++++++++++++++
  lib/igt_pci.h   | 32 ++++++++++++++++++++++++++++++++
  lib/meson.build |  1 +
  3 files changed, 77 insertions(+)

create mode 100644 lib/igt_pci.c
create mode 100644 lib/igt_pci.h

lib/igt_pci.c new file +30 -0
new file mode 100644
index 0000000000..bc0369341d
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: MIT
+/*
+ * Copyright © 2022 Intel Corporation
+ */
+
+#include <pciaccess.h>
+#include "igt_pci.h"
+
+/**
+ * find_pci_cap_offset:
+ * @dev: pci device
+ * @cap_id: searched capability id, 0 means any capability
+ * @start_offset: offset in config space from which we start searching
+ *
+ * return:
+ * -1 on config read error, 0 if capability is not found,
+ * otherwise offset at which capability with cap_id is found
+ */
+int find_pci_cap_offset_at(struct pci_device *dev, enum pci_cap_id cap_id,
+			   int start_offset)
+{
+	uint8_t offset;
+	uint16_t cap_header;
+	int loop = (PCI_CFG_SPACE_SIZE - PCI_TYPE0_1_HEADER_SIZE)
+			/ sizeof(cap_header);
+
+	if (pci_device_cfg_read_u8(dev, &offset, start_offset))
+		return -1;
+
+	while (loop--) {

lib/igt_pci.c line 40

Quoted 10 lines
lib/igt_pci.c new file +10 -0
+		if (offset < PCI_TYPE0_1_HEADER_SIZE)
+			break;
+
+		if (pci_device_cfg_read_u16(dev, &cap_header, (offset & 0xFC)))
+			return -1;
+
+		if (!cap_id || cap_id == (cap_header & 0xFF))
+			return offset;
+
+		offset = cap_header >> 8;

For the last capability, next capability address will always be 0. So above instead of using while(loop--) we can use while(offset).

Quoted 2 lines

Regards,
Badal

This way we are guarded for endless looping, btw check for zero is just at loop enter (first if).

Quoted 2 lines

lib/igt_pci.c line 42

Quoted 2 lines
lib/igt_pci.c new file +2 -0
+	}
+

I would like to see additional check here:

	if (loop <= 0 && offset)
		return -1;

or maybe assert here ?

Quoted 18 lines
Quoted 18 lines
lib/igt_pci.c new file +2 -0
+	return 0;
+}
lib/igt_pci.h new file +10 -0
new file mode 100644
index 0000000000..68afd2dacb
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: MIT
+/*
+ * Copyright © 2022 Intel Corporation
+ */
+
+#ifndef __IGT_PCI_H__
+#define __IGT_PCI_H__
+
+#include <stdint.h>
+#include <endian.h>
Quoted 8 lines

lib/igt_pci.h line 18

Quoted 8 lines
lib/igt_pci.h new file +8 -0
+
+/* forward declaration */
+struct pci_device;
+
+#define PCI_TYPE0_1_HEADER_SIZE 0x40
+#define PCI_CAPS_START 0x34
+#define PCI_CFG_SPACE_SIZE 0x100
+#define PCIE_CFG_SPACE_SIZE 0x1000

------------ ^
Remove this, it is unused.

Quoted 9 lines

lib/igt_pci.h line 27

Quoted 9 lines
lib/igt_pci.h new file +9 -0
+
+enum pci_cap_id {
+	PCI_EXPRESS_CAP_ID = 0x10
+};
+
+int find_pci_cap_offset_at(struct pci_device *dev, enum pci_cap_id cap_id,
+			   int start_offset);
+
+static inline int find_pci_cap_offset(struct pci_device *dev, enum pci_cap_id cap_id)

---- ^ ---- ^
Remove this, it is work for optimizitaion in compiler, no need for it here.
Btw do you expect user to use both functions ?

+cc Marcin

Regards,
Kamil

Quoted 17 lines
Quoted 17 lines
lib/igt_pci.h new file +5 -0
+{
+	return find_pci_cap_offset_at(dev, cap_id, PCI_CAPS_START);
+}
+
+#endif
lib/meson.build +1 -0
index cef2d0ff3d..e0fb7ddfed 100644
@@ -33,6 +33,7 @@ lib_sources = [
  	'igt_pipe_crc.c',
  	'igt_power.c',
  	'igt_primes.c',
+	'igt_pci.c',
  	'igt_rand.c',
  	'igt_stats.c',
  	'igt_syncobj.c',
#4 lore raw

Re: [igt-dev] [PATCH i-g-t v3 1/5] lib/igt_pci: helpers to get PCI capabilities offset

Quoted 70 lines · Kamil Konieczny

Hi,

Quoted 67 lines · Badal

Hi Anshuman,

Quoted 51 lines · Anshuman Gupta

Added helper functions to search for PCI capabilities with help of libpciaccess library.

---
   lib/igt_pci.c   | 44 ++++++++++++++++++++++++++++++++++++++++++++
   lib/igt_pci.h   | 32 ++++++++++++++++++++++++++++++++
   lib/meson.build |  1 +
   3 files changed, 77 insertions(+)

create mode 100644 lib/igt_pci.c
create mode 100644 lib/igt_pci.h

lib/igt_pci.c new file +30 -0
new file mode 100644
index 0000000000..bc0369341d
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: MIT
+/*
+ * Copyright © 2022 Intel Corporation
+ */
+
+#include <pciaccess.h>
+#include "igt_pci.h"
+
+/**
+ * find_pci_cap_offset:
+ * @dev: pci device
+ * @cap_id: searched capability id, 0 means any capability
+ * @start_offset: offset in config space from which we start searching
+ *
+ * return:
+ * -1 on config read error, 0 if capability is not found,
+ * otherwise offset at which capability with cap_id is found
+ */
+int find_pci_cap_offset_at(struct pci_device *dev, enum pci_cap_id cap_id,
+			   int start_offset)
+{
+	uint8_t offset;
+	uint16_t cap_header;
+	int loop = (PCI_CFG_SPACE_SIZE - PCI_TYPE0_1_HEADER_SIZE)
+			/ sizeof(cap_header);
+
+	if (pci_device_cfg_read_u8(dev, &offset, start_offset))
+		return -1;
+
+	while (loop--) {

lib/igt_pci.c line 40

Quoted 10 lines
lib/igt_pci.c new file +10 -0
+		if (offset < PCI_TYPE0_1_HEADER_SIZE)
+			break;
+
+		if (pci_device_cfg_read_u16(dev, &cap_header, (offset & 0xFC)))
+			return -1;
+
+		if (!cap_id || cap_id == (cap_header & 0xFF))
+			return offset;
+
+		offset = cap_header >> 8;

For the last capability, next capability address will always be 0. So above instead of using while(loop--) we can use while(offset).

Quoted 5 lines
Quoted 2 lines

Regards,
Badal

This way we are guarded for endless looping, btw check for zero is just at loop enter (first if).

Agreed.

It is seen that when config space inaccessible it throws value 0xff.
So inside loop we should check if offset or capid != 0xff and break the loop otherwise.

Quoted 76 lines
Quoted 3 lines

lib/igt_pci.c line 42

Quoted 3 lines
lib/igt_pci.c new file +2 -0
+	}
+

I would like to see additional check here:

	if (loop <= 0 && offset)
		return -1;

or maybe assert here ?

Quoted 18 lines
Quoted 18 lines
lib/igt_pci.c new file +2 -0
+	return 0;
+}
lib/igt_pci.h new file +10 -0
new file mode 100644
index 0000000000..68afd2dacb
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: MIT
+/*
+ * Copyright © 2022 Intel Corporation
+ */
+
+#ifndef __IGT_PCI_H__
+#define __IGT_PCI_H__
+
+#include <stdint.h>
+#include <endian.h>
Quoted 8 lines

lib/igt_pci.h line 18

Quoted 8 lines
lib/igt_pci.h new file +8 -0
+
+/* forward declaration */
+struct pci_device;
+
+#define PCI_TYPE0_1_HEADER_SIZE 0x40
+#define PCI_CAPS_START 0x34
+#define PCI_CFG_SPACE_SIZE 0x100
+#define PCIE_CFG_SPACE_SIZE 0x1000

------------ ^
Remove this, it is unused.

Quoted 9 lines

lib/igt_pci.h line 27

Quoted 9 lines
lib/igt_pci.h new file +9 -0
+
+enum pci_cap_id {
+	PCI_EXPRESS_CAP_ID = 0x10
+};
+
+int find_pci_cap_offset_at(struct pci_device *dev, enum pci_cap_id cap_id,
+			   int start_offset);
+
+static inline int find_pci_cap_offset(struct pci_device *dev, enum pci_cap_id cap_id)

---- ^ ---- ^
Remove this, it is work for optimizitaion in compiler, no need for it here.
Btw do you expect user to use both functions ?

+cc Marcin

Regards,
Kamil

Quoted 17 lines
Quoted 17 lines
lib/igt_pci.h new file +5 -0
+{
+	return find_pci_cap_offset_at(dev, cap_id, PCI_CAPS_START);
+}
+
+#endif
lib/meson.build +1 -0
index cef2d0ff3d..e0fb7ddfed 100644
@@ -33,6 +33,7 @@ lib_sources = [
   	'igt_pipe_crc.c',
   	'igt_power.c',
   	'igt_primes.c',
+	'igt_pci.c',
   	'igt_rand.c',
   	'igt_stats.c',
   	'igt_syncobj.c',
#5 lore raw

Re: [igt-dev] [PATCH i-g-t v3 1/5] lib/igt_pci: helpers to get PCI capabilities offset

Quoted 78 lines · Badal
Quoted 75 lines · Kamil Konieczny

Hi,

Quoted 71 lines · Badal

Hi Anshuman,

Quoted 58 lines · Anshuman Gupta

Added helper functions to search for PCI capabilities with help of libpciaccess library.

---
   lib/igt_pci.c   | 44 ++++++++++++++++++++++++++++++++++++++++++++ lib/igt_pci.h   | 32 ++++++++++++++++++++++++++++++++ lib/meson.build |  1 +

   3 files changed, 77 insertions(+)

   create mode 100644 lib/igt_pci.c
   create mode 100644 lib/igt_pci.h

lib/igt_pci.c new file +19 -0
new file mode 100644
index 0000000000..bc0369341d
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: MIT
+/*
+ * Copyright © 2022 Intel Corporation
+ */
+
+#include <pciaccess.h>
+#include "igt_pci.h"
+
+/**
+ * find_pci_cap_offset:
+ * @dev: pci device
+ * @cap_id: searched capability id, 0 means any capability
+ * @start_offset: offset in config space from which we start searching
+ *
+ * return:
+ * -1 on config read error, 0 if capability is not found,
+ * otherwise offset at which capability with cap_id is found
+ */
+int find_pci_cap_offset_at(struct pci_device *dev, enum pci_cap_id 

cap_id,
+               int start_offset)

lib/igt_pci.c new file +14 -0
+{
+    uint8_t offset;
+    uint16_t cap_header;
+    int loop = (PCI_CFG_SPACE_SIZE - PCI_TYPE0_1_HEADER_SIZE)
+            / sizeof(cap_header);
+
+    if (pci_device_cfg_read_u8(dev, &offset, start_offset))
+        return -1;
+
+    while (loop--) {
+        if (offset < PCI_TYPE0_1_HEADER_SIZE)
+            break;
+
+        if (pci_device_cfg_read_u16(dev, &cap_header, (offset & 

0xFC)))
+            return -1;

lib/igt_pci.c line 40

Quoted 5 lines
lib/igt_pci.c new file +5 -0
+
+        if (!cap_id || cap_id == (cap_header & 0xFF))
+            return offset;
+
+        offset = cap_header >> 8;

For the last capability, next capability address will always be 0. So above instead of using while(loop--) we can use while(offset).

Regards,
Badal

Quoted 6 lines
Quoted 2 lines

This way we are guarded for endless looping, btw check for zero is just at loop enter (first if).

Agreed.

It is seen that when config space inaccessible it throws value 0xff.
So inside loop we should check if offset or capid != 0xff and break the loop otherwise.

In such case I would expect pci_device_cfg_read_XXX to return != 0 => break the loop.

Quoted 78 lines
Quoted 78 lines
Quoted 3 lines
Quoted 3 lines

+    }
+

I would like to see additional check here:

    if (loop <= 0 && offset)
        return -1;

or maybe assert here ?

Quoted 18 lines
Quoted 18 lines

+    return 0;

lib/igt_pci.c new file +1 -0
+}
lib/igt_pci.h new file +10 -0
new file mode 100644
index 0000000000..68afd2dacb
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: MIT
+/*
+ * Copyright © 2022 Intel Corporation
+ */
+
+#ifndef __IGT_PCI_H__
+#define __IGT_PCI_H__
+
+#include <stdint.h>
+#include <endian.h>
Quoted 8 lines

lib/igt_pci.h line 18

Quoted 8 lines
lib/igt_pci.h new file +8 -0
+
+/* forward declaration */
+struct pci_device;
+
+#define PCI_TYPE0_1_HEADER_SIZE 0x40
+#define PCI_CAPS_START 0x34
+#define PCI_CFG_SPACE_SIZE 0x100
+#define PCIE_CFG_SPACE_SIZE 0x1000

------------ ^
Remove this, it is unused.

Quoted 11 lines
Quoted 11 lines
lib/igt_pci.h new file +6 -0
+
+enum pci_cap_id {
+    PCI_EXPRESS_CAP_ID = 0x10
+};
+
+int find_pci_cap_offset_at(struct pci_device *dev, enum pci_cap_id 

cap_id,
+               int start_offset);

lib/igt_pci.h new file +2 -0
+
+static inline int find_pci_cap_offset(struct pci_device *dev, enum 

pci_cap_id cap_id)

---- ^ ---- ^
Remove this, it is work for optimizitaion in compiler, no need for it here.
Btw do you expect user to use both functions ?

+cc Marcin

Regards,
Kamil

Quoted 17 lines
Quoted 17 lines
lib/igt_pci.h new file +5 -0
+{
+    return find_pci_cap_offset_at(dev, cap_id, PCI_CAPS_START);
+}
+
+#endif
lib/meson.build +1 -0
index cef2d0ff3d..e0fb7ddfed 100644
@@ -33,6 +33,7 @@ lib_sources = [
        'igt_pipe_crc.c',
        'igt_power.c',
        'igt_primes.c',
+    'igt_pci.c',
        'igt_rand.c',
        'igt_stats.c',
        'igt_syncobj.c',
#6 lore raw

Re: [igt-dev] [PATCH i-g-t v3 1/5] lib/igt_pci: helpers to get PCI capabilities offset

In reply to Kamil Konieczny
Quoted 81 lines · Kamil Konieczny

Hi,

Quoted 67 lines · Badal

Hi Anshuman,

Quoted 51 lines · Anshuman Gupta

Added helper functions to search for PCI capabilities with help of libpciaccess library.

---
   lib/igt_pci.c   | 44 ++++++++++++++++++++++++++++++++++++++++++++
   lib/igt_pci.h   | 32 ++++++++++++++++++++++++++++++++
   lib/meson.build |  1 +
   3 files changed, 77 insertions(+)

create mode 100644 lib/igt_pci.c
create mode 100644 lib/igt_pci.h

lib/igt_pci.c new file +30 -0
new file mode 100644
index 0000000000..bc0369341d
@@ -0,0 +1,44 @@
+// SPDX-License-Identifier: MIT
+/*
+ * Copyright © 2022 Intel Corporation
+ */
+
+#include <pciaccess.h>
+#include "igt_pci.h"
+
+/**
+ * find_pci_cap_offset:
+ * @dev: pci device
+ * @cap_id: searched capability id, 0 means any capability
+ * @start_offset: offset in config space from which we start searching
+ *
+ * return:
+ * -1 on config read error, 0 if capability is not found,
+ * otherwise offset at which capability with cap_id is found
+ */
+int find_pci_cap_offset_at(struct pci_device *dev, enum pci_cap_id cap_id,
+			   int start_offset)
+{
+	uint8_t offset;
+	uint16_t cap_header;
+	int loop = (PCI_CFG_SPACE_SIZE - PCI_TYPE0_1_HEADER_SIZE)
+			/ sizeof(cap_header);
+
+	if (pci_device_cfg_read_u8(dev, &offset, start_offset))
+		return -1;
+
+	while (loop--) {

lib/igt_pci.c line 40

Quoted 10 lines
lib/igt_pci.c new file +10 -0
+		if (offset < PCI_TYPE0_1_HEADER_SIZE)
+			break;
+
+		if (pci_device_cfg_read_u16(dev, &cap_header, (offset & 0xFC)))
+			return -1;
+
+		if (!cap_id || cap_id == (cap_header & 0xFF))
+			return offset;
+
+		offset = cap_header >> 8;

For the last capability, next capability address will always be 0. So above instead of using while(loop--) we can use while(offset).

Quoted 2 lines

Regards,
Badal

This way we are guarded for endless looping, btw check for zero is just at loop enter (first if).

Quoted 2 lines

lib/igt_pci.c line 42

Quoted 2 lines
lib/igt_pci.c new file +2 -0
+	}
+

I would like to see additional check here:

Quoted 4 lines
	if (loop <= 0 && offset)
		return -1;

or maybe assert here ?

why ? the -1 is on config read error

* return:
* -1 on config read error, 0 if capability is not found,
* otherwise offset at which capability with cap_id is found

Quoted 66 lines
Quoted 19 lines
Quoted 19 lines
lib/igt_pci.c new file +2 -0
+	return 0;
+}
lib/igt_pci.h new file +10 -0
new file mode 100644
index 0000000000..68afd2dacb
@@ -0,0 +1,32 @@
+// SPDX-License-Identifier: MIT
+/*
+ * Copyright © 2022 Intel Corporation
+ */
+
+#ifndef __IGT_PCI_H__
+#define __IGT_PCI_H__
+
+#include <stdint.h>
+#include <endian.h>
Quoted 8 lines

lib/igt_pci.h line 18

Quoted 8 lines
lib/igt_pci.h new file +8 -0
+
+/* forward declaration */
+struct pci_device;
+
+#define PCI_TYPE0_1_HEADER_SIZE 0x40
+#define PCI_CAPS_START 0x34
+#define PCI_CFG_SPACE_SIZE 0x100
+#define PCIE_CFG_SPACE_SIZE 0x1000

------------ ^
Remove this, it is unused.

Quoted 9 lines

lib/igt_pci.h line 27

Quoted 9 lines
lib/igt_pci.h new file +9 -0
+
+enum pci_cap_id {
+	PCI_EXPRESS_CAP_ID = 0x10
+};
+
+int find_pci_cap_offset_at(struct pci_device *dev, enum pci_cap_id cap_id,
+			   int start_offset);
+
+static inline int find_pci_cap_offset(struct pci_device *dev, enum pci_cap_id cap_id)

---- ^ ---- ^
Remove this, it is work for optimizitaion in compiler, no need for it here.
Btw do you expect user to use both functions ?

+cc Marcin

Regards,
Kamil

Quoted 17 lines
Quoted 17 lines
lib/igt_pci.h new file +5 -0
+{
+	return find_pci_cap_offset_at(dev, cap_id, PCI_CAPS_START);
+}
+
+#endif
lib/meson.build +1 -0
index cef2d0ff3d..e0fb7ddfed 100644
@@ -33,6 +33,7 @@ lib_sources = [
   	'igt_pipe_crc.c',
   	'igt_power.c',
   	'igt_primes.c',
+	'igt_pci.c',
   	'igt_rand.c',
   	'igt_stats.c',
   	'igt_syncobj.c',
#7 lore raw

PATCH v3 2/5 lib/igt_pci: Add PCIe slot cap

In reply to Anshuman Gupta

Adding PCIe slot cap register offset and Power Controller Present bit mask macros.

---
 lib/igt_pci.h | 3 +++
 1 file changed, 3 insertions(+)
lib/igt_pci.h +3 -0
index 68afd2dacb..5c2863d657 100644
@@ -21,6 +21,9 @@ enum pci_cap_id {
 	PCI_EXPRESS_CAP_ID = 0x10
 };
 
+#define PCI_SLOT_CAP_OFFSET 0x14  /* PCIe specs chapter 7.8.9 */
+#define  PCI_SLOT_PWR_CTRL_PRESENT (1 << 1)
+
 int find_pci_cap_offset_at(struct pci_device *dev, enum pci_cap_id cap_id,
 			   int start_offset);
 
Signature · 1 line
2.25.1
Reviewed-by on v3 2/5
#8 lore raw

Re: [igt-dev] [PATCH i-g-t v3 2/5] lib/igt_pci: Add PCIe slot cap

Hi Anshuman,

With a comment this is

Quoted 13 lines · Anshuman Gupta

Adding PCIe slot cap register offset and Power Controller Present bit mask macros.

---
  lib/igt_pci.h | 3 +++
  1 file changed, 3 insertions(+)
lib/igt_pci.h +0 -0
index 68afd2dacb..5c2863d657 100644

lib/igt_pci.h enum pci_cap_id { · line 24

Quoted 4 lines
lib/igt_pci.h +1 -0
@@ -21,6 +21,9 @@ enum pci_cap_id {
  	PCI_EXPRESS_CAP_ID = 0x10
  };
 
+#define PCI_SLOT_CAP_OFFSET 0x14  /* PCIe specs chapter 7.8.9 */

I think lets avoid adding comment about chapter number. Chapter number can change as specs keep updating.

Regards,
Badal

Quoted 5 lines
lib/igt_pci.h +2 -0
+#define  PCI_SLOT_PWR_CTRL_PRESENT (1 << 1)
+
  int find_pci_cap_offset_at(struct pci_device *dev, enum pci_cap_id cap_id,
  			   int start_offset);
 
#9 lore raw

PATCH v3 3/5 lib/igt_pm: Refactor get firmware_node fd

In reply to Anshuman Gupta

Created igt_pm_open_pci_firmware_node() to refactor the retrieving the firmware_node fd code.

igt_pm_open_pci_firmware_node() will be used by other firmware_node consumers.

While doing that fixed the leaked fd as well.

v2:
- return false instead of igt_require on no firmware_node_fd. [Kamil]
- use igt_assert() when failed to open 'real_power_state' on error other then ENONET.

---
 lib/igt_pm.c | 36 +++++++++++++++++++++++++-----------
 1 file changed, 25 insertions(+), 11 deletions(-)
lib/igt_pm.c +25 -11
index 1e6e9ed3ff..4f0cfbdd10 100644
@@ -863,6 +863,20 @@ bool i915_output_is_lpsp_capable(int drm_fd, igt_output_t *output)
 	return strstr(buf, "LPSP: capable");
 }
 
+static int igt_pm_open_pci_firmware_node(struct pci_device *pci_dev)
+{
+	char name[PATH_MAX];
+	int dir;
+
+	snprintf(name, PATH_MAX,
+		 "/sys/bus/pci/devices/%04x:%02x:%02x.%01x/firmware_node",
+		 pci_dev->domain, pci_dev->bus, pci_dev->dev, pci_dev->func);
+
+	dir = open(name, O_RDONLY);
+
+	return dir;
+}
+
 /**
  * igt_pm_acpi_d3cold_supported:
  * @pci_dev: root port pci_dev.
@@ -873,23 +887,23 @@ bool i915_output_is_lpsp_capable(int drm_fd, igt_output_t *output)
  */
 bool igt_pm_acpi_d3cold_supported(struct pci_device *pci_dev)
 {
-	char name[PATH_MAX];
-	int dir, fd;
-
-	snprintf(name, PATH_MAX,
-		 "/sys/bus/pci/devices/%04x:%02x:%02x.%01x/firmware_node",
-		 pci_dev->domain, pci_dev->bus, pci_dev->dev, pci_dev->func);
+	int firmware_node_fd, fd;
 
-	dir = open(name, O_RDONLY);
-	igt_require(dir > 0);
+	firmware_node_fd = igt_pm_open_pci_firmware_node(pci_dev);
+	if (firmware_node_fd < 0)
+		return false;
 
 	/* BIOS need to enable ACPI D3Cold Support.*/
-	fd = openat(dir, "real_power_state", O_RDONLY);
-	if (fd < 0 && errno == ENOENT)
+	fd = openat(firmware_node_fd, "real_power_state", O_RDONLY);
+	if (fd < 0 && errno == ENOENT) {
+		close(firmware_node_fd);
 		return false;
+	}
 
-	igt_require(fd > 0);
+	igt_assert(errno > 0);
 
+	close(firmware_node_fd);
+	close(fd);
 	return true;
 }
 
Signature · 1 line
2.25.1
#10 lore raw

Re: [igt-dev] [PATCH i-g-t v3 3/5] lib/igt_pm: Refactor get firmware_node fd

Hi Anshuman,

one small nit, see below.

Quoted 63 lines · Anshuman Gupta

Created igt_pm_open_pci_firmware_node() to refactor the retrieving the firmware_node fd code.

igt_pm_open_pci_firmware_node() will be used by other firmware_node consumers.

While doing that fixed the leaked fd as well.

v2:
- return false instead of igt_require on no firmware_node_fd. [Kamil]
- use igt_assert() when failed to open 'real_power_state' on error other then ENONET.

---
 lib/igt_pm.c | 36 +++++++++++++++++++++++++-----------
 1 file changed, 25 insertions(+), 11 deletions(-)
lib/igt_pm.c +18 -8
index 1e6e9ed3ff..4f0cfbdd10 100644
@@ -863,6 +863,20 @@ bool i915_output_is_lpsp_capable(int drm_fd, igt_output_t *output)
 	return strstr(buf, "LPSP: capable");
 }
 
+static int igt_pm_open_pci_firmware_node(struct pci_device *pci_dev)
+{
+	char name[PATH_MAX];
+	int dir;
+
+	snprintf(name, PATH_MAX,
+		 "/sys/bus/pci/devices/%04x:%02x:%02x.%01x/firmware_node",
+		 pci_dev->domain, pci_dev->bus, pci_dev->dev, pci_dev->func);
+
+	dir = open(name, O_RDONLY);
+
+	return dir;
+}
+
 /**
  * igt_pm_acpi_d3cold_supported:
  * @pci_dev: root port pci_dev.
@@ -873,23 +887,23 @@ bool i915_output_is_lpsp_capable(int drm_fd, igt_output_t *output)
  */
 bool igt_pm_acpi_d3cold_supported(struct pci_device *pci_dev)
 {
-	char name[PATH_MAX];
-	int dir, fd;
-
-	snprintf(name, PATH_MAX,
-		 "/sys/bus/pci/devices/%04x:%02x:%02x.%01x/firmware_node",
-		 pci_dev->domain, pci_dev->bus, pci_dev->dev, pci_dev->func);
+	int firmware_node_fd, fd;
 
-	dir = open(name, O_RDONLY);
-	igt_require(dir > 0);
+	firmware_node_fd = igt_pm_open_pci_firmware_node(pci_dev);
+	if (firmware_node_fd < 0)
+		return false;
 
 	/* BIOS need to enable ACPI D3Cold Support.*/

lib/igt_pm.c bool i915_output_is_lpsp_capable(int drm_fd, igt_output_t *output) · line 903

Quoted 10 lines
lib/igt_pm.c +5 -3
-	fd = openat(dir, "real_power_state", O_RDONLY);
-	if (fd < 0 && errno == ENOENT)
+	fd = openat(firmware_node_fd, "real_power_state", O_RDONLY);
+	if (fd < 0 && errno == ENOENT) {
+		close(firmware_node_fd);
 		return false;
+	}
 
-	igt_require(fd > 0);
+	igt_assert(errno > 0);

You want here no error, so

	igt_assert(errno == 0);
or better:
	igt_assert_f(fd > 0, "failed to open real_power_state, errno=%d\n", errno);

Regards,
Kamil

Quoted 9 lines
lib/igt_pm.c +2 -0
+	close(firmware_node_fd);
+	close(fd);
 	return true;
 }
 
Signature · 1 line
2.25.1
#11 lore raw

Re: [igt-dev] [PATCH i-g-t v3 3/5] lib/igt_pm: Refactor get firmware_node fd

Quoted 92 lines

-----Original Message-----
From: Kamil Konieczny <[email protected]>
Sent: Wednesday, November 30, 2022 2:14 PM
To: [email protected]
Cc: Gupta, Anshuman <[email protected]>; Vivi, Rodrigo <[email protected]>; [email protected]; Tangudu, Tilak <[email protected]>; Nilawar, Badal <[email protected]>; Iddamsetty, Aravind <[email protected]>
Subject: Re: [PATCH i-g-t v3 3/5] lib/igt_pm: Refactor get firmware_node fd

Hi Anshuman,

one small nit, see below.

lib/igt_pm.c bool i915_output_is_lpsp_capable(int drm_fd,

Quoted 24 lines · Anshuman Gupta

Created igt_pm_open_pci_firmware_node() to refactor the retrieving the firmware_node fd code.

igt_pm_open_pci_firmware_node() will be used by other firmware_node consumers.

While doing that fixed the leaked fd as well.

v2:
- return false instead of igt_require on no firmware_node_fd. [Kamil]
- use igt_assert() when failed to open 'real_power_state' on error other then ENONET.

---
 lib/igt_pm.c | 36 +++++++++++++++++++++++++-----------
 1 file changed, 25 insertions(+), 11 deletions(-)
lib/igt_pm.c index 1e6e9ed3ff..4f0cfbdd10 renamed from lib/igt_pm.c +0 -0

100644

lib/igt_pm.c +0 -0
@@ -863,6 +863,20 @@ bool i915_output_is_lpsp_capable(int drm_fd,

igt_output_t *output)

lib/igt_pm.c bool i915_output_is_lpsp_capable(int drm_fd, igt_output_t *output) · line 874

Quoted 9 lines
lib/igt_pm.c +7 -0
 	return strstr(buf, "LPSP: capable");  }
 
+static int igt_pm_open_pci_firmware_node(struct pci_device *pci_dev)
+{
+	char name[PATH_MAX];
+	int dir;
+
+	snprintf(name, PATH_MAX,
+

"/sys/bus/pci/devices/%04x:%02x:%02x.%01x/firmware_node",

lib/igt_pm.c bool i915_output_is_lpsp_capable(int drm_fd,

Quoted 12 lines
lib/igt_pm.c +7 -0
+		 pci_dev->domain, pci_dev->bus, pci_dev->dev, pci_dev-
 func);
+
+	dir = open(name, O_RDONLY);
+
+	return dir;
+}
+
 /**
  * igt_pm_acpi_d3cold_supported:
  * @pci_dev: root port pci_dev.
@@ -873,23 +887,23 @@ bool i915_output_is_lpsp_capable(int drm_fd,

igt_output_t *output)

lib/igt_pm.c bool i915_output_is_lpsp_capable(int drm_fd, igt_output_t *output)

Quoted 7 lines
lib/igt_pm.c +0 -5
  */
 bool igt_pm_acpi_d3cold_supported(struct pci_device *pci_dev)  {
-	char name[PATH_MAX];
-	int dir, fd;
-
-	snprintf(name, PATH_MAX,
-

"/sys/bus/pci/devices/%04x:%02x:%02x.%01x/firmware_node",

Quoted 19 lines
lib/igt_pm.c +8 -5
-		 pci_dev->domain, pci_dev->bus, pci_dev->dev, pci_dev-
 func);
+	int firmware_node_fd, fd;
 
-	dir = open(name, O_RDONLY);
-	igt_require(dir > 0);
+	firmware_node_fd = igt_pm_open_pci_firmware_node(pci_dev);
+	if (firmware_node_fd < 0)
+		return false;
 
 	/* BIOS need to enable ACPI D3Cold Support.*/
-	fd = openat(dir, "real_power_state", O_RDONLY);
-	if (fd < 0 && errno == ENOENT)
+	fd = openat(firmware_node_fd, "real_power_state", O_RDONLY);
+	if (fd < 0 && errno == ENOENT) {
+		close(firmware_node_fd);
 		return false;
+	}
 
Quoted 8 lines

lib/igt_pm.c bool i915_output_is_lpsp_capable(int drm_fd, igt_output_t *output) · line 903

Quoted 2 lines
lib/igt_pm.c +1 -1
-	igt_require(fd > 0);
+	igt_assert(errno > 0);

You want here no error, so

	igt_assert(errno == 0);

or better:
igt_assert_f(fd > 0, "failed to open real_power_state, errno=%d\n",
errno);

Thanks for pointing it out.
I will fix it.
BR,
Anshuman.

Quoted 13 lines

Regards,
Kamil

Quoted 9 lines
lib/igt_pm.c +2 -1
+	close(firmware_node_fd);
+	close(fd);
 	return true;
 }
 
--

2.25.1

#12 lore raw

PATCH v3 4/5 test/device_reset: Refactor initiate_device_reset

In reply to Anshuman Gupta

Added a reset type enum to support multiple types
of reset like WARM, COLD and FLR reset.

No functional change.

v2:
- Removed WARM_RESET enum as not used yet. [Badal]

---
 tests/device_reset.c | 20 ++++++++++++++------
 1 file changed, 14 insertions(+), 6 deletions(-)
tests/device_reset.c +14 -6
index e60d4c7fde..0c477a02c0 100644
@@ -19,6 +19,11 @@ IGT_TEST_DESCRIPTION("Examine behavior of a driver on device sysfs reset");
 #define DEV_PATH_LEN 80
 #define DEV_BUS_ADDR_LEN 13 /* addr has form 0000:00:00.0 */
 
+enum reset {
+	COLD_RESET,
+	FLR_RESET
+};
+
 /**
  * Helper structure containing file descriptors
  * and bus address related to tested device
@@ -222,10 +227,13 @@ static void driver_bind(struct device_fds *dev)
 }
 
 /* Initiate device reset */
-static void initiate_device_reset(struct device_fds *dev)
+static void initiate_device_reset(struct device_fds *dev, enum reset type)
 {
 	igt_debug("reset device\n");
-	igt_assert(igt_sysfs_set(dev->fds.dev_dir, "reset", "1"));
+
+	if (type == FLR_RESET)
+		igt_assert(igt_sysfs_set(dev->fds.dev_dir, "reset", "1"));
+
 }
 
 static bool is_i915_wedged(int i915)
@@ -274,14 +282,14 @@ static void set_device_filter(const char* dev_path)
 	igt_assert_eq(igt_device_filter_add(filter), 1);
 }
 
-static void unbind_reset_rebind(struct device_fds *dev)
+static void unbind_reset_rebind(struct device_fds *dev, enum reset type)
 {
 	igt_debug("close the device\n");
 	close_if_opened(&dev->fds.dev);
 
 	driver_unbind(dev);
 
-	initiate_device_reset(dev);
+	initiate_device_reset(dev, type);
 
 	driver_bind(dev);
 }
@@ -306,13 +314,13 @@ igt_main
 	igt_describe("Unbinds driver from device, initiates reset"
 		     " then rebinds driver to device");
 	igt_subtest("unbind-reset-rebind") {
-		unbind_reset_rebind(&dev);
+		unbind_reset_rebind(&dev, FLR_RESET);
 		healthcheck(&dev);
 	}
 
 	igt_describe("Resets device with bound driver");
 	igt_subtest("reset-bound") {
-		initiate_device_reset(&dev);
+		initiate_device_reset(&dev, FLR_RESET);
 		healthcheck(&dev);
 	}
 
Signature · 1 line
2.25.1
#13 lore raw

PATCH v3 5/5 tests/device_reset: Add cold reset IGT test

In reply to Anshuman Gupta

Add cold-reset IGT subtest, IGT subtest will use /sys/bus/pci/slots/$SUN/power sysfs in order to initiate a cold reset sequence. $SUN value will be retrieved from PCIe device ACPI firmware node.

v2:
- %s/igt_require(fd > 0)/igt_assert(errno >0)
v3:
- Added Slot Power Controller capability check. [Aravind]
- Check whether slot is powered down before powering up. [Aravind]

---
 lib/igt_pm.c         |  40 +++++++++++
 lib/igt_pm.h         |   1 +
 tests/device_reset.c | 153 ++++++++++++++++++++++++++++++++++++++++---
 3 files changed, 184 insertions(+), 10 deletions(-)
lib/igt_pm.c +40 -0
index 4f0cfbdd10..9b7ed4be64 100644
@@ -877,6 +877,46 @@ static int igt_pm_open_pci_firmware_node(struct pci_device *pci_dev)
 	return dir;
 }
 
+/**
+ * igt_pm_get_pcie_acpihp_slot:
+ * @pci_dev: pci bridge device.
+ * Get pci bridge acpi hotplug slot number, if bridge's ACPI firmware_node
+ * handle supports _SUN method.
+ *
+ * Returns:
+ * PCIe bridge Slot number.
+ * Returns -ENOENT number in case firmware_node/sun is not supported by the
+ * bridge.
+ */
+int igt_pm_get_pcie_acpihp_slot(struct pci_device *pci_dev)
+{
+	int firmware_node_fd, fd, n_read;
+	char sun[8];
+
+	firmware_node_fd = igt_pm_open_pci_firmware_node(pci_dev);
+
+	if (firmware_node_fd < 0 && errno == ENOENT)
+		return -ENOENT;
+
+	igt_require(firmware_node_fd > 0);
+
+	fd = openat(firmware_node_fd, "sun", O_RDONLY);
+	if (fd < 0 && errno == ENOENT) {
+		close(firmware_node_fd);
+		return -ENOENT;
+	}
+
+	igt_assert(errno > 0);
+
+	n_read = read(fd, sun, sizeof(sun));
+	igt_assert(n_read > 0);
+
+	close(firmware_node_fd);
+	close(fd);
+
+	return strtol(sun, NULL, 10);
+}
+
 /**
  * igt_pm_acpi_d3cold_supported:
  * @pci_dev: root port pci_dev.
lib/igt_pm.h +1 -0
index e81fceb897..f65b960c38 100644
@@ -73,6 +73,7 @@ bool igt_wait_for_pm_status(enum igt_runtime_pm_status status);
 bool igt_pm_dmc_loaded(int debugfs);
 bool igt_pm_pc8_plus_residencies_enabled(int msr_fd);
 bool i915_output_is_lpsp_capable(int drm_fd, igt_output_t *output);
+int igt_pm_get_pcie_acpihp_slot(struct pci_device *pci_dev);
 bool igt_pm_acpi_d3cold_supported(struct pci_device *pci_dev);
 enum igt_acpi_d_state
 igt_pm_get_acpi_real_d_state(struct pci_device *pci_dev);
tests/device_reset.c +143 -10

205 lines not on this page · raw message

Signature · 1 line
2.25.1
#14 lore raw

Re: [igt-dev] [PATCH i-g-t v3 5/5] tests/device_reset: Add cold reset IGT test

Quoted 190 lines · Anshuman Gupta

Add cold-reset IGT subtest, IGT subtest will use /sys/bus/pci/slots/$SUN/power sysfs in order to initiate a cold reset sequence. $SUN value will be retrieved from PCIe device ACPI firmware node.

v2:
- %s/igt_require(fd > 0)/igt_assert(errno >0)
v3:
- Added Slot Power Controller capability check. [Aravind]
- Check whether slot is powered down before powering up. [Aravind]

---
 lib/igt_pm.c         |  40 +++++++++++
 lib/igt_pm.h         |   1 +
 tests/device_reset.c | 153 ++++++++++++++++++++++++++++++++++++++++---
 3 files changed, 184 insertions(+), 10 deletions(-)
lib/igt_pm.c +40 -0
index 4f0cfbdd10..9b7ed4be64 100644
@@ -877,6 +877,46 @@ static int igt_pm_open_pci_firmware_node(struct pci_device *pci_dev)
 	return dir;
 }
 
+/**
+ * igt_pm_get_pcie_acpihp_slot:
+ * @pci_dev: pci bridge device.
+ * Get pci bridge acpi hotplug slot number, if bridge's ACPI firmware_node
+ * handle supports _SUN method.
+ *
+ * Returns:
+ * PCIe bridge Slot number.
+ * Returns -ENOENT number in case firmware_node/sun is not supported by the
+ * bridge.
+ */
+int igt_pm_get_pcie_acpihp_slot(struct pci_device *pci_dev)
+{
+	int firmware_node_fd, fd, n_read;
+	char sun[8];
+
+	firmware_node_fd = igt_pm_open_pci_firmware_node(pci_dev);
+
+	if (firmware_node_fd < 0 && errno == ENOENT)
+		return -ENOENT;
+
+	igt_require(firmware_node_fd > 0);
+
+	fd = openat(firmware_node_fd, "sun", O_RDONLY);
+	if (fd < 0 && errno == ENOENT) {
+		close(firmware_node_fd);
+		return -ENOENT;
+	}
+
+	igt_assert(errno > 0);
+
+	n_read = read(fd, sun, sizeof(sun));
+	igt_assert(n_read > 0);
+
+	close(firmware_node_fd);
+	close(fd);
+
+	return strtol(sun, NULL, 10);
+}
+
 /**
  * igt_pm_acpi_d3cold_supported:
  * @pci_dev: root port pci_dev.
lib/igt_pm.h +1 -0
index e81fceb897..f65b960c38 100644
@@ -73,6 +73,7 @@ bool igt_wait_for_pm_status(enum igt_runtime_pm_status status);
 bool igt_pm_dmc_loaded(int debugfs);
 bool igt_pm_pc8_plus_residencies_enabled(int msr_fd);
 bool i915_output_is_lpsp_capable(int drm_fd, igt_output_t *output);
+int igt_pm_get_pcie_acpihp_slot(struct pci_device *pci_dev);
 bool igt_pm_acpi_d3cold_supported(struct pci_device *pci_dev);
 enum igt_acpi_d_state
 igt_pm_get_acpi_real_d_state(struct pci_device *pci_dev);
tests/device_reset.c +64 -0
index 0c477a02c0..4c624ce7d3 100644
@@ -9,7 +9,9 @@
 
 #include "i915/gem.h"
 #include "igt.h"
+#include "igt_device.h"
 #include "igt_device_scan.h"
+#include "igt_pci.h"
 #include "igt_sysfs.h"
 #include "igt_kmod.h"
 
@@ -33,6 +35,7 @@ struct device_fds {
 		int dev;
 		int dev_dir;
 		int drv_dir;
+		int slot_dir; /* pci hotplug slots fd */
 	} fds;
 	char dev_bus_addr[DEV_BUS_ADDR_LEN];
 	bool snd_unload;
@@ -62,6 +65,45 @@ static int open_driver_sysfs_dir(int fd)
 	return __open_sysfs_dir(fd, "device/driver");
 }
 
+static int open_slot_sysfs_dir(int fd)
+{
+	struct pci_device *pci_dev = NULL;
+	int slot_fd = -1, slot;
+	char slot_fd_path[PATH_MAX];
+
+	pci_dev = igt_device_get_pci_device(fd);
+	igt_require(pci_dev);
+
+	while ((pci_dev = pci_device_get_parent_bridge(pci_dev))) {
+		slot = igt_pm_get_pcie_acpihp_slot(pci_dev);
+		if (slot == -ENOENT) {
+			igt_debug("Bridge PCI device %04x:%02x:%02x.%01x does not support acpihp slot\n",
+				  pci_dev->domain, pci_dev->bus, pci_dev->dev, pci_dev->func);
+			continue;
+		}
+
+		/*
+		 * Upon getting the valid acpihp slot number break the loop.
+		 * It is the desired acpihp slot for gfx card.
+		 */
+		if (slot > 0) {
+			igt_debug("Bridge PCI device %04x:%02x:%02x.%01x associated acpihp slot %d\n",
+				  pci_dev->domain, pci_dev->bus, pci_dev->dev, pci_dev->func, slot);
+			break;
+		}
+	}
+
+	if (!pci_dev)
+		return slot_fd;
+
+	snprintf(slot_fd_path, PATH_MAX, "/sys/bus/pci/slots/%d", slot);
+	slot_fd = open(slot_fd_path, O_RDONLY);
+	if (slot_fd < 0)
+		return -errno;
+
+	return slot_fd;
+}
+
 /**
  * device_sysfs_path:
  * @fd: opened device file descriptor
@@ -124,6 +166,8 @@ static void init_device_fds(struct device_fds *dev)
 
 	dev->fds.drv_dir = open_driver_sysfs_dir(dev->fds.dev);
 	igt_assert_fd(dev->fds.drv_dir);
+
+	dev->fds.slot_dir = open_slot_sysfs_dir(dev->fds.dev);
 }
 
 static int close_if_opened(int *fd)
@@ -142,6 +186,7 @@ static void cleanup_device_fds(struct device_fds *dev)
 	igt_ignore_warn(close_if_opened(&dev->fds.dev));
 	igt_ignore_warn(close_if_opened(&dev->fds.dev_dir));
 	igt_ignore_warn(close_if_opened(&dev->fds.drv_dir));
+	igt_ignore_warn(close_if_opened(&dev->fds.slot_dir));
 }
 
 /**
@@ -179,6 +224,60 @@ static bool is_sysfs_reset_supported(int fd)
 	return true;
 }
 
+/**
+ * is_sysfs_cold_reset_supported:
+ * @fd: opened device file descriptor
+ *
+ * Check if device supports cold reset based on sysfs file presence.
+ *
+ * Returns:
+ * True if device supports reset, false otherwise.
+ */
+static bool is_sysfs_cold_reset_supported(int slot_fd)
+{
+	struct stat st;
+	int rc;
+	int cold_reset_fd = -1;
+
+	cold_reset_fd = openat(slot_fd, "power", O_WRONLY);
+
+	if (cold_reset_fd < 0)
+		return false;

tests/device_reset.c static bool is_sysfs_reset_supported(int fd) · line 255

Quoted 10 lines
tests/device_reset.c +10 -0
+
+	rc = fstat(cold_reset_fd, &st);
+	close(cold_reset_fd);
+
+	if (rc || !S_ISREG(st.st_mode))
+		return false;
+
+	return true;
+}
+

why do not you combine the below two checks into is_sysfs_cold_reset_supported as the check will be done only if power sysfs is present.

Thanks,
Aravind.

Quoted 99 lines
tests/device_reset.c +69 -10
+static bool is_pci_power_ctrl_present(struct pci_device *dev)
+{
+	int offset;
+	uint32_t slot_cap;
+
+	offset = find_pci_cap_offset(dev, PCI_EXPRESS_CAP_ID);
+	igt_require_f(offset > 0, "PCI Express Capability not found\n");
+	igt_assert(!pci_device_cfg_read_u32(dev, &slot_cap, offset + PCI_SLOT_CAP_OFFSET));
+	igt_debug("slot cap register 0x%x\n", slot_cap);
+
+	return slot_cap & PCI_SLOT_PWR_CTRL_PRESENT;
+}
+
+static bool is_slot_power_ctrl_present(int fd)
+{
+	struct pci_device *root;
+
+	/*
+	 * Card root port Slot Capabilities Register
+	 * determines Power Controller Presence.
+	 */
+	root = igt_device_get_pci_root_port(fd);
+	return is_pci_power_ctrl_present(root);
+}
+
 /* Unbind the driver from the device */
 static void driver_unbind(struct device_fds *dev)
 {
@@ -231,8 +330,13 @@ static void initiate_device_reset(struct device_fds *dev, enum reset type)
 {
 	igt_debug("reset device\n");
 
-	if (type == FLR_RESET)
+	if (type == FLR_RESET) {
 		igt_assert(igt_sysfs_set(dev->fds.dev_dir, "reset", "1"));
+	} else if (type == COLD_RESET) {
+		igt_assert(igt_sysfs_set(dev->fds.slot_dir, "power", "0"));
+		igt_assert(!igt_sysfs_get_boolean(dev->fds.slot_dir, "power"));
+		igt_assert(igt_sysfs_set(dev->fds.slot_dir, "power", "1"));
+	}
 
 }
 
@@ -311,17 +415,46 @@ igt_main
 		igt_skip_on(!is_sysfs_reset_supported(dev.fds.dev));
 	}
 
-	igt_describe("Unbinds driver from device, initiates reset"
-		     " then rebinds driver to device");
-	igt_subtest("unbind-reset-rebind") {
-		unbind_reset_rebind(&dev, FLR_RESET);
-		healthcheck(&dev);
+	igt_subtest_group {
+		igt_describe("Unbinds driver from device, initiates reset"
+			     " then rebinds driver to device");
+		igt_subtest("unbind-reset-rebind") {
+			unbind_reset_rebind(&dev, FLR_RESET);
+			healthcheck(&dev);
+		}
+
+		igt_describe("Resets device with bound driver");
+		igt_subtest("reset-bound") {
+			initiate_device_reset(&dev, FLR_RESET);
+			/*
+			 * Cold reset will initiate card boot sequence again,
+			 * therefore let healthcheck() re-epen the dev fd.
+			 */
+			dev.fds.dev = -1;
+			healthcheck(&dev);
+		}
 	}
 
-	igt_describe("Resets device with bound driver");
-	igt_subtest("reset-bound") {
-		initiate_device_reset(&dev, FLR_RESET);
-		healthcheck(&dev);
+	igt_subtest_group {
+		igt_fixture {
+			igt_skip_on_f(dev.fds.slot_dir < 0, "Gfx Card does not support any "
+				      "pcie slot for cold reset\n");
+			igt_skip_on(!is_sysfs_cold_reset_supported(dev.fds.slot_dir));
+			igt_skip_on(!is_slot_power_ctrl_present(dev.fds.dev));
+		}
+
+		igt_describe("Unbinds driver from device, initiates cold reset"
+			     " then rebinds driver to device");
+		igt_subtest("unbind-cold-reset-rebind") {
+			unbind_reset_rebind(&dev, COLD_RESET);
+			healthcheck(&dev);
+		}
+
+		igt_describe("Cold Resets device with bound driver");
+		igt_subtest("cold-reset-bound") {
+			initiate_device_reset(&dev, COLD_RESET);
+			healthcheck(&dev);
+		}
 	}
 
 	igt_fixture {
#15 lore raw

Re: [igt-dev] [PATCH i-g-t v3 5/5] tests/device_reset: Add cold reset IGT test

Quoted 215 lines

-----Original Message-----
From: Iddamsetty, Aravind <[email protected]>
Sent: Friday, November 25, 2022 9:57 AM
To: Gupta, Anshuman <[email protected]>; igt- [email protected]
Cc: Vivi, Rodrigo <[email protected]>; [email protected]; Tangudu, Tilak <[email protected]>; Nilawar, Badal <[email protected]>
Subject: Re: [PATCH i-g-t v3 5/5] tests/device_reset: Add cold reset IGT test

lib/igt_pm.c static int igt_pm_open_pci_firmware_node(struct

Quoted 25 lines · Anshuman Gupta

Add cold-reset IGT subtest, IGT subtest will use /sys/bus/pci/slots/$SUN/power sysfs in order to initiate a cold reset sequence. $SUN value will be retrieved from PCIe device ACPI firmware node.

v2:
- %s/igt_require(fd > 0)/igt_assert(errno >0)
v3:
- Added Slot Power Controller capability check. [Aravind]
- Check whether slot is powered down before powering up. [Aravind]

---
 lib/igt_pm.c         |  40 +++++++++++
 lib/igt_pm.h         |   1 +
 tests/device_reset.c | 153
++++++++++++++++++++++++++++++++++++++++---
 3 files changed, 184 insertions(+), 10 deletions(-)
lib/igt_pm.c index 4f0cfbdd10..9b7ed4be64 renamed from lib/igt_pm.c +0 -0

100644

lib/igt_pm.c +0 -0
@@ -877,6 +877,46 @@ static int igt_pm_open_pci_firmware_node(struct

pci_device *pci_dev)

Quoted 85 lines
lib/igt_pm.c +41 -0
 	return dir;
 }
 
+/**
+ * igt_pm_get_pcie_acpihp_slot:
+ * @pci_dev: pci bridge device.
+ * Get pci bridge acpi hotplug slot number, if bridge's ACPI
+firmware_node
+ * handle supports _SUN method.
+ *
+ * Returns:
+ * PCIe bridge Slot number.
+ * Returns -ENOENT number in case firmware_node/sun is not supported
+by the
+ * bridge.
+ */
+int igt_pm_get_pcie_acpihp_slot(struct pci_device *pci_dev) {
+	int firmware_node_fd, fd, n_read;
+	char sun[8];
+
+	firmware_node_fd = igt_pm_open_pci_firmware_node(pci_dev);
+
+	if (firmware_node_fd < 0 && errno == ENOENT)
+		return -ENOENT;
+
+	igt_require(firmware_node_fd > 0);
+
+	fd = openat(firmware_node_fd, "sun", O_RDONLY);
+	if (fd < 0 && errno == ENOENT) {
+		close(firmware_node_fd);
+		return -ENOENT;
+	}
+
+	igt_assert(errno > 0);
+
+	n_read = read(fd, sun, sizeof(sun));
+	igt_assert(n_read > 0);
+
+	close(firmware_node_fd);
+	close(fd);
+
+	return strtol(sun, NULL, 10);
+}
+
 /**
  * igt_pm_acpi_d3cold_supported:
  * @pci_dev: root port pci_dev.
lib/igt_pm.h index e81fceb897..f65b960c38 renamed from lib/igt_pm.h +0 -0

100644

lib/igt_pm.h +0 -0
@@ -73,6 +73,7 @@ bool igt_wait_for_pm_status(enum
 igt_runtime_pm_status status);  bool igt_pm_dmc_loaded(int debugfs);

bool igt_pm_pc8_plus_residencies_enabled(int msr_fd); bool i915_output_is_lpsp_capable(int drm_fd, igt_output_t *output); +int igt_pm_get_pcie_acpihp_slot(struct pci_device *pci_dev);
bool igt_pm_acpi_d3cold_supported(struct pci_device *pci_dev); enum
igt_acpi_d_state igt_pm_get_acpi_real_d_state(struct pci_device *pci_dev); diff --git a/tests/device_reset.c b/tests/device_reset.c index 0c477a02c0..4c624ce7d3 100644

tests/device_reset.c +5 -0
@@ -9,7 +9,9 @@
 
 #include "i915/gem.h"
 #include "igt.h"
+#include "igt_device.h"
 #include "igt_device_scan.h"
+#include "igt_pci.h"
 #include "igt_sysfs.h"
 #include "igt_kmod.h"
 
@@ -33,6 +35,7 @@ struct device_fds {
 		int dev;
 		int dev_dir;
 		int drv_dir;
+		int slot_dir; /* pci hotplug slots fd */
 	} fds;
 	char dev_bus_addr[DEV_BUS_ADDR_LEN];
 	bool snd_unload;
@@ -62,6 +65,45 @@ static int open_driver_sysfs_dir(int fd)
 	return __open_sysfs_dir(fd, "device/driver");  }
 
+static int open_slot_sysfs_dir(int fd) {
+	struct pci_device *pci_dev = NULL;

tests/device_reset.c static int open_driver_sysfs_dir(int fd) · line 78

Quoted 10 lines
tests/device_reset.c +10 -0
+	int slot_fd = -1, slot;
+	char slot_fd_path[PATH_MAX];
+
+	pci_dev = igt_device_get_pci_device(fd);
+	igt_require(pci_dev);
+
+	while ((pci_dev = pci_device_get_parent_bridge(pci_dev))) {
+		slot = igt_pm_get_pcie_acpihp_slot(pci_dev);
+		if (slot == -ENOENT) {
+			igt_debug("Bridge PCI device %04x:%02x:%02x.%01x

does not support acpihp slot\n",

tests/device_reset.c static int open_driver_sysfs_dir(int fd)

Quoted 11 lines
tests/device_reset.c +10 -0
+				  pci_dev->domain, pci_dev->bus, pci_dev-
 dev, pci_dev->func);
+			continue;
+		}
+
+		/*
+		 * Upon getting the valid acpihp slot number break the loop.
+		 * It is the desired acpihp slot for gfx card.
+		 */
+		if (slot > 0) {
+			igt_debug("Bridge PCI device %04x:%02x:%02x.%01x

associated acpihp slot %d\n",

tests/device_reset.c static void cleanup_device_fds(struct device_fds

Quoted 30 lines
tests/device_reset.c +16 -0
+				  pci_dev->domain, pci_dev->bus, pci_dev-
 dev, pci_dev->func, slot);
+			break;
+		}
+	}
+
+	if (!pci_dev)
+		return slot_fd;
+
+	snprintf(slot_fd_path, PATH_MAX, "/sys/bus/pci/slots/%d", slot);
+	slot_fd = open(slot_fd_path, O_RDONLY);
+	if (slot_fd < 0)
+		return -errno;
+
+	return slot_fd;
+}
+
 /**
  * device_sysfs_path:
  * @fd: opened device file descriptor @@ -124,6 +166,8 @@ static void

init_device_fds(struct device_fds *dev)

tests/device_reset.c +2 -0
 	dev->fds.drv_dir = open_driver_sysfs_dir(dev->fds.dev);
 	igt_assert_fd(dev->fds.drv_dir);
+
+	dev->fds.slot_dir = open_slot_sysfs_dir(dev->fds.dev);
 }
 
 static int close_if_opened(int *fd)
@@ -142,6 +186,7 @@ static void cleanup_device_fds(struct device_fds

*dev)

Quoted 35 lines
tests/device_reset.c +25 -0
 	igt_ignore_warn(close_if_opened(&dev->fds.dev));
 	igt_ignore_warn(close_if_opened(&dev->fds.dev_dir));
 	igt_ignore_warn(close_if_opened(&dev->fds.drv_dir));
+	igt_ignore_warn(close_if_opened(&dev->fds.slot_dir));
 }
 
 /**
@@ -179,6 +224,60 @@ static bool is_sysfs_reset_supported(int fd)
 	return true;
 }
 
+/**
+ * is_sysfs_cold_reset_supported:
+ * @fd: opened device file descriptor
+ *
+ * Check if device supports cold reset based on sysfs file presence.
+ *
+ * Returns:
+ * True if device supports reset, false otherwise.
+ */
+static bool is_sysfs_cold_reset_supported(int slot_fd) {
+	struct stat st;
+	int rc;
+	int cold_reset_fd = -1;
+
+	cold_reset_fd = openat(slot_fd, "power", O_WRONLY);
+
+	if (cold_reset_fd < 0)
+		return false;
+
+	rc = fstat(cold_reset_fd, &st);
+	close(cold_reset_fd);
+
+	if (rc || !S_ISREG(st.st_mode))
+		return false;
Quoted 8 lines

tests/device_reset.c static bool is_sysfs_reset_supported(int fd) · line 255

Quoted 4 lines
tests/device_reset.c +4 -0
+
+	return true;
+}
+

why do not you combine the below two checks into is_sysfs_cold_reset_supported as the check will be done only if power sysfs is present.

Thanks for review after this comment, I am pondering that it would be better to check the is_slot_power_ctrl_present() even before checking for slot number to save the CI time.
As without power controller capability it is in vain to check for slot number.
igt_skip_on_f(!is_slot_power_ctrl_present(dev.fds.dev), "Gfx Card root port does not support power ctrl"); igt_skip_on_f(dev.fds.slot_dir < 0, "Gfx Card does not support any "

				      "pcie slot for cold reset\n");

igt_skip_on(!is_sysfs_cold_reset_supported(dev.fds.slot_dir)); igt_skip_on(!is_slot_power_ctrl_present(dev.fds.dev));

BR,
Anshuman Gupta.

Quoted 102 lines

Thanks,
Aravind.

tests/device_reset.c static bool is_sysfs_reset_supported(int fd)

Quoted 7 lines
tests/device_reset.c +7 -0
+static bool is_pci_power_ctrl_present(struct pci_device *dev) {
+	int offset;
+	uint32_t slot_cap;
+
+	offset = find_pci_cap_offset(dev, PCI_EXPRESS_CAP_ID);
+	igt_require_f(offset > 0, "PCI Express Capability not found\n");
+	igt_assert(!pci_device_cfg_read_u32(dev, &slot_cap, offset +

PCI_SLOT_CAP_OFFSET));

Quoted 17 lines
tests/device_reset.c +14 -0
+	igt_debug("slot cap register 0x%x\n", slot_cap);
+
+	return slot_cap & PCI_SLOT_PWR_CTRL_PRESENT; }
+
+static bool is_slot_power_ctrl_present(int fd) {
+	struct pci_device *root;
+
+	/*
+	 * Card root port Slot Capabilities Register
+	 * determines Power Controller Presence.
+	 */
+	root = igt_device_get_pci_root_port(fd);
+	return is_pci_power_ctrl_present(root); }
+
 /* Unbind the driver from the device */  static void

driver_unbind(struct device_fds *dev) { @@ -231,8 +330,13 @@ static void initiate_device_reset(struct device_fds *dev, enum reset type) {

tests/device_reset.c static void initiate_device_reset(struct device_fds *dev, enum reset type)

Quoted 8 lines
tests/device_reset.c +4 -1
 	igt_debug("reset device\n");
 
-	if (type == FLR_RESET)
+	if (type == FLR_RESET) {
 		igt_assert(igt_sysfs_set(dev->fds.dev_dir, "reset", "1"));
+	} else if (type == COLD_RESET) {
+		igt_assert(igt_sysfs_set(dev->fds.slot_dir, "power", "0"));
+		igt_assert(!igt_sysfs_get_boolean(dev->fds.slot_dir,

"power"));

Quoted 31 lines
tests/device_reset.c +19 -5
+		igt_assert(igt_sysfs_set(dev->fds.slot_dir, "power", "1"));
+	}
 
 }
@@ -311,17 +415,46 @@ igt_main
 		igt_skip_on(!is_sysfs_reset_supported(dev.fds.dev));
 	}
 
-	igt_describe("Unbinds driver from device, initiates reset"
-		     " then rebinds driver to device");
-	igt_subtest("unbind-reset-rebind") {
-		unbind_reset_rebind(&dev, FLR_RESET);
-		healthcheck(&dev);
+	igt_subtest_group {
+		igt_describe("Unbinds driver from device, initiates reset"
+			     " then rebinds driver to device");
+		igt_subtest("unbind-reset-rebind") {
+			unbind_reset_rebind(&dev, FLR_RESET);
+			healthcheck(&dev);
+		}
+
+		igt_describe("Resets device with bound driver");
+		igt_subtest("reset-bound") {
+			initiate_device_reset(&dev, FLR_RESET);
+			/*
+			 * Cold reset will initiate card boot sequence again,
+			 * therefore let healthcheck() re-epen the dev fd.
+			 */
+			dev.fds.dev = -1;
+			healthcheck(&dev);

tests/device_reset.c igt_main · line 440

Quoted 10 lines
tests/device_reset.c +4 -4
+		}
 	}
 
-	igt_describe("Resets device with bound driver");
-	igt_subtest("reset-bound") {
-		initiate_device_reset(&dev, FLR_RESET);
-		healthcheck(&dev);
+	igt_subtest_group {
+		igt_fixture {
+			igt_skip_on_f(dev.fds.slot_dir < 0, "Gfx Card does

not support any "

tests/device_reset.c igt_main · line 442

Quoted 2 lines
tests/device_reset.c +2 -0
+				      "pcie slot for cold reset\n");
+
	igt_skip_on(!is_sysfs_cold_reset_supported(dev.fds.slot_dir));

tests/device_reset.c igt_main · line 443

Quoted 1 line
tests/device_reset.c +1 -0
+
	igt_skip_on(!is_slot_power_ctrl_present(dev.fds.dev));

tests/device_reset.c igt_main · line 446

Quoted 3 lines
tests/device_reset.c +3 -0
+		}
+
+		igt_describe("Unbinds driver from device, initiates cold

reset"

Quoted 14 lines
tests/device_reset.c +11 -0
+			     " then rebinds driver to device");
+		igt_subtest("unbind-cold-reset-rebind") {
+			unbind_reset_rebind(&dev, COLD_RESET);
+			healthcheck(&dev);
+		}
+
+		igt_describe("Cold Resets device with bound driver");
+		igt_subtest("cold-reset-bound") {
+			initiate_device_reset(&dev, COLD_RESET);
+			healthcheck(&dev);
+		}
 	}
 
 	igt_fixture {
#16 lore raw

Re: [igt-dev] [PATCH i-g-t v3 5/5] tests/device_reset: Add cold reset IGT test

Quoted 247 lines

-----Original Message-----
From: Gupta, Anshuman <[email protected]>
Sent: Friday, November 25, 2022 10:24 AM
To: Iddamsetty, Aravind <[email protected]>; igt- [email protected]
Cc: Vivi, Rodrigo <[email protected]>; [email protected]; Tangudu, Tilak <[email protected]>; Nilawar, Badal <[email protected]>
Subject: RE: [PATCH i-g-t v3 5/5] tests/device_reset: Add cold reset IGT test

Quoted 34 lines

-----Original Message-----
From: Iddamsetty, Aravind <[email protected]>
Sent: Friday, November 25, 2022 9:57 AM
To: Gupta, Anshuman <[email protected]>; igt- [email protected]
Cc: Vivi, Rodrigo <[email protected]>; [email protected]; Tangudu, Tilak <[email protected]>; Nilawar, Badal <[email protected]>
Subject: Re: [PATCH i-g-t v3 5/5] tests/device_reset: Add cold reset IGT test

Quoted 20 lines · Anshuman Gupta

Add cold-reset IGT subtest, IGT subtest will use /sys/bus/pci/slots/$SUN/power sysfs in order to initiate a cold reset sequence. $SUN value will be retrieved from PCIe device ACPI firmware node.

v2:
- %s/igt_require(fd > 0)/igt_assert(errno >0)
v3:
- Added Slot Power Controller capability check. [Aravind]
- Check whether slot is powered down before powering up. [Aravind]

---
 lib/igt_pm.c         |  40 +++++++++++
 lib/igt_pm.h         |   1 +
 tests/device_reset.c | 153
++++++++++++++++++++++++++++++++++++++++---
 3 files changed, 184 insertions(+), 10 deletions(-)
Quoted 6 lines

lib/igt_pm.c static int

Quoted 6 lines
lib/igt_pm.c index renamed from lib/igt_pm.c +0 -0

4f0cfbdd10..9b7ed4be64
100644

lib/igt_pm.c +0 -0
@@ -877,6 +877,46 @@ static int

igt_pm_open_pci_firmware_node(struct

Quoted 176 lines

pci_device *pci_dev)

Quoted 86 lines
lib/igt_pm.c +41 -0
 	return dir;
 }
 
+/**
+ * igt_pm_get_pcie_acpihp_slot:
+ * @pci_dev: pci bridge device.
+ * Get pci bridge acpi hotplug slot number, if bridge's ACPI
+firmware_node
+ * handle supports _SUN method.
+ *
+ * Returns:
+ * PCIe bridge Slot number.
+ * Returns -ENOENT number in case firmware_node/sun is not
+supported by the
+ * bridge.
+ */
+int igt_pm_get_pcie_acpihp_slot(struct pci_device *pci_dev) {
+	int firmware_node_fd, fd, n_read;
+	char sun[8];
+
+	firmware_node_fd = igt_pm_open_pci_firmware_node(pci_dev);
+
+	if (firmware_node_fd < 0 && errno == ENOENT)
+		return -ENOENT;
+
+	igt_require(firmware_node_fd > 0);
+
+	fd = openat(firmware_node_fd, "sun", O_RDONLY);
+	if (fd < 0 && errno == ENOENT) {
+		close(firmware_node_fd);
+		return -ENOENT;
+	}
+
+	igt_assert(errno > 0);
+
+	n_read = read(fd, sun, sizeof(sun));
+	igt_assert(n_read > 0);
+
+	close(firmware_node_fd);
+	close(fd);
+
+	return strtol(sun, NULL, 10);
+}
+
 /**
  * igt_pm_acpi_d3cold_supported:
  * @pci_dev: root port pci_dev.
lib/igt_pm.h index renamed from lib/igt_pm.h +0 -0

e81fceb897..f65b960c38
100644

lib/igt_pm.h +0 -0
@@ -73,6 +73,7 @@ bool igt_wait_for_pm_status(enum
 igt_runtime_pm_status status);  bool igt_pm_dmc_loaded(int debugfs);

bool igt_pm_pc8_plus_residencies_enabled(int msr_fd); bool i915_output_is_lpsp_capable(int drm_fd, igt_output_t *output); +int igt_pm_get_pcie_acpihp_slot(struct pci_device *pci_dev);
bool igt_pm_acpi_d3cold_supported(struct pci_device *pci_dev);
enum igt_acpi_d_state igt_pm_get_acpi_real_d_state(struct pci_device *pci_dev); diff --git a/tests/device_reset.c b/tests/device_reset.c index 0c477a02c0..4c624ce7d3 100644

tests/device_reset.c +5 -0
@@ -9,7 +9,9 @@
 
 #include "i915/gem.h"
 #include "igt.h"
+#include "igt_device.h"
 #include "igt_device_scan.h"
+#include "igt_pci.h"
 #include "igt_sysfs.h"
 #include "igt_kmod.h"
 
@@ -33,6 +35,7 @@ struct device_fds {
 		int dev;
 		int dev_dir;
 		int drv_dir;
+		int slot_dir; /* pci hotplug slots fd */
 	} fds;
 	char dev_bus_addr[DEV_BUS_ADDR_LEN];
 	bool snd_unload;
@@ -62,6 +65,45 @@ static int open_driver_sysfs_dir(int fd)
 	return __open_sysfs_dir(fd, "device/driver");  }
 
+static int open_slot_sysfs_dir(int fd) {
+	struct pci_device *pci_dev = NULL;

tests/device_reset.c static int open_driver_sysfs_dir(int fd) · line 78

Quoted 10 lines
tests/device_reset.c +10 -0
+	int slot_fd = -1, slot;
+	char slot_fd_path[PATH_MAX];
+
+	pci_dev = igt_device_get_pci_device(fd);
+	igt_require(pci_dev);
+
+	while ((pci_dev = pci_device_get_parent_bridge(pci_dev))) {
+		slot = igt_pm_get_pcie_acpihp_slot(pci_dev);
+		if (slot == -ENOENT) {
+			igt_debug("Bridge PCI device %04x:%02x:%02x.%01x

does not support acpihp slot\n",

tests/device_reset.c static int open_driver_sysfs_dir(int fd)

Quoted 11 lines
tests/device_reset.c +10 -0
+				  pci_dev->domain, pci_dev->bus, pci_dev-
 dev, pci_dev->func);
+			continue;
+		}
+
+		/*
+		 * Upon getting the valid acpihp slot number break the loop.
+		 * It is the desired acpihp slot for gfx card.
+		 */
+		if (slot > 0) {
+			igt_debug("Bridge PCI device %04x:%02x:%02x.%01x

associated acpihp slot %d\n",

Quoted 29 lines
tests/device_reset.c +16 -0
+				  pci_dev->domain, pci_dev->bus, pci_dev-
 dev, pci_dev->func, slot);
+			break;
+		}
+	}
+
+	if (!pci_dev)
+		return slot_fd;
+
+	snprintf(slot_fd_path, PATH_MAX, "/sys/bus/pci/slots/%d", slot);
+	slot_fd = open(slot_fd_path, O_RDONLY);
+	if (slot_fd < 0)
+		return -errno;
+
+	return slot_fd;
+}
+
 /**
  * device_sysfs_path:
  * @fd: opened device file descriptor @@ -124,6 +166,8 @@ static

void init_device_fds(struct device_fds *dev)

tests/device_reset.c +2 -0
 	dev->fds.drv_dir = open_driver_sysfs_dir(dev->fds.dev);
 	igt_assert_fd(dev->fds.drv_dir);
+
+	dev->fds.slot_dir = open_slot_sysfs_dir(dev->fds.dev);
 }
 
 static int close_if_opened(int *fd) @@ -142,6 +186,7 @@ static void
Quoted 1 line

cleanup_device_fds(struct device_fds

*dev)

Quoted 35 lines
tests/device_reset.c +25 -0
 	igt_ignore_warn(close_if_opened(&dev->fds.dev));
 	igt_ignore_warn(close_if_opened(&dev->fds.dev_dir));
 	igt_ignore_warn(close_if_opened(&dev->fds.drv_dir));
+	igt_ignore_warn(close_if_opened(&dev->fds.slot_dir));
 }
 
 /**
@@ -179,6 +224,60 @@ static bool is_sysfs_reset_supported(int fd)
 	return true;
 }
 
+/**
+ * is_sysfs_cold_reset_supported:
+ * @fd: opened device file descriptor
+ *
+ * Check if device supports cold reset based on sysfs file presence.
+ *
+ * Returns:
+ * True if device supports reset, false otherwise.
+ */
+static bool is_sysfs_cold_reset_supported(int slot_fd) {
+	struct stat st;
+	int rc;
+	int cold_reset_fd = -1;
+
+	cold_reset_fd = openat(slot_fd, "power", O_WRONLY);
+
+	if (cold_reset_fd < 0)
+		return false;
+
+	rc = fstat(cold_reset_fd, &st);
+	close(cold_reset_fd);
+
+	if (rc || !S_ISREG(st.st_mode))
+		return false;
Quoted 8 lines

tests/device_reset.c static bool is_sysfs_reset_supported(int fd) · line 255

Quoted 4 lines
tests/device_reset.c +4 -0
+
+	return true;
+}
+

why do not you combine the below two checks into is_sysfs_cold_reset_supported as the check will be done only if power sysfs is present.

Thanks for review after this comment, I am pondering that it would be better to check the
is_slot_power_ctrl_present() even before checking for slot number to save the CI time.
As without power controller capability it is in vain to check for slot number.
igt_skip_on_f(!is_slot_power_ctrl_present(dev.fds.dev), "Gfx Card root port
does not support power ctrl"); igt_skip_on_f(dev.fds.slot_dir < 0, "Gfx Card does not support any "

Quoted 3 lines
				      "pcie slot for cold reset\n");

igt_skip_on(!is_sysfs_cold_reset_supported(dev.fds.slot_dir));
igt_skip_on(!is_slot_power_ctrl_present(dev.fds.dev));

That's true.

Regards,
Aravind.

Quoted 105 lines

BR,
Anshuman Gupta.

Quoted 102 lines

Thanks,
Aravind.

tests/device_reset.c static bool is_sysfs_reset_supported(int fd)

Quoted 7 lines
tests/device_reset.c +7 -0
+static bool is_pci_power_ctrl_present(struct pci_device *dev) {
+	int offset;
+	uint32_t slot_cap;
+
+	offset = find_pci_cap_offset(dev, PCI_EXPRESS_CAP_ID);
+	igt_require_f(offset > 0, "PCI Express Capability not found\n");
+	igt_assert(!pci_device_cfg_read_u32(dev, &slot_cap, offset +

PCI_SLOT_CAP_OFFSET));

Quoted 17 lines
tests/device_reset.c +14 -0
+	igt_debug("slot cap register 0x%x\n", slot_cap);
+
+	return slot_cap & PCI_SLOT_PWR_CTRL_PRESENT; }
+
+static bool is_slot_power_ctrl_present(int fd) {
+	struct pci_device *root;
+
+	/*
+	 * Card root port Slot Capabilities Register
+	 * determines Power Controller Presence.
+	 */
+	root = igt_device_get_pci_root_port(fd);
+	return is_pci_power_ctrl_present(root); }
+
 /* Unbind the driver from the device */  static void

driver_unbind(struct device_fds *dev) { @@ -231,8 +330,13 @@ static void initiate_device_reset(struct device_fds *dev, enum reset type) {

tests/device_reset.c static void initiate_device_reset(struct device_fds *dev, enum reset type)

Quoted 8 lines
tests/device_reset.c +4 -1
 	igt_debug("reset device\n");
 
-	if (type == FLR_RESET)
+	if (type == FLR_RESET) {
 		igt_assert(igt_sysfs_set(dev->fds.dev_dir, "reset", "1"));
+	} else if (type == COLD_RESET) {
+		igt_assert(igt_sysfs_set(dev->fds.slot_dir, "power", "0"));
+		igt_assert(!igt_sysfs_get_boolean(dev->fds.slot_dir,

"power"));

Quoted 31 lines
tests/device_reset.c +19 -5
+		igt_assert(igt_sysfs_set(dev->fds.slot_dir, "power", "1"));
+	}
 
 }
@@ -311,17 +415,46 @@ igt_main
 		igt_skip_on(!is_sysfs_reset_supported(dev.fds.dev));
 	}
 
-	igt_describe("Unbinds driver from device, initiates reset"
-		     " then rebinds driver to device");
-	igt_subtest("unbind-reset-rebind") {
-		unbind_reset_rebind(&dev, FLR_RESET);
-		healthcheck(&dev);
+	igt_subtest_group {
+		igt_describe("Unbinds driver from device, initiates reset"
+			     " then rebinds driver to device");
+		igt_subtest("unbind-reset-rebind") {
+			unbind_reset_rebind(&dev, FLR_RESET);
+			healthcheck(&dev);
+		}
+
+		igt_describe("Resets device with bound driver");
+		igt_subtest("reset-bound") {
+			initiate_device_reset(&dev, FLR_RESET);
+			/*
+			 * Cold reset will initiate card boot sequence again,
+			 * therefore let healthcheck() re-epen the dev fd.
+			 */
+			dev.fds.dev = -1;
+			healthcheck(&dev);

tests/device_reset.c igt_main · line 440

Quoted 10 lines
tests/device_reset.c +4 -4
+		}
 	}
 
-	igt_describe("Resets device with bound driver");
-	igt_subtest("reset-bound") {
-		initiate_device_reset(&dev, FLR_RESET);
-		healthcheck(&dev);
+	igt_subtest_group {
+		igt_fixture {
+			igt_skip_on_f(dev.fds.slot_dir < 0, "Gfx Card does

not support any "

tests/device_reset.c igt_main · line 442

Quoted 2 lines
tests/device_reset.c +2 -0
+				      "pcie slot for cold reset\n");
+
	igt_skip_on(!is_sysfs_cold_reset_supported(dev.fds.slot_dir));

tests/device_reset.c igt_main · line 443

Quoted 1 line
tests/device_reset.c +1 -0
+
	igt_skip_on(!is_slot_power_ctrl_present(dev.fds.dev));

tests/device_reset.c igt_main · line 446

Quoted 3 lines
tests/device_reset.c +3 -0
+		}
+
+		igt_describe("Unbinds driver from device, initiates cold

reset"

Quoted 14 lines
tests/device_reset.c +11 -0
+			     " then rebinds driver to device");
+		igt_subtest("unbind-cold-reset-rebind") {
+			unbind_reset_rebind(&dev, COLD_RESET);
+			healthcheck(&dev);
+		}
+
+		igt_describe("Cold Resets device with bound driver");
+		igt_subtest("cold-reset-bound") {
+			initiate_device_reset(&dev, COLD_RESET);
+			healthcheck(&dev);
+		}
 	}
 
 	igt_fixture {
#17 lore raw

PATCH v4 4/5 test/device_reset: Refactor initiate_device_reset

In reply to Anshuman Gupta

Added a reset type enum to support multiple types
of reset like WARM, COLD and FLR reset.

No functional change.

v2:
- Removed WARM_RESET enum as not used yet. [Badal]

---
 tests/device_reset.c | 20 ++++++++++++++------
 1 file changed, 14 insertions(+), 6 deletions(-)
tests/device_reset.c +14 -6
index e60d4c7fde..0c477a02c0 100644
@@ -19,6 +19,11 @@ IGT_TEST_DESCRIPTION("Examine behavior of a driver on device sysfs reset");
 #define DEV_PATH_LEN 80
 #define DEV_BUS_ADDR_LEN 13 /* addr has form 0000:00:00.0 */
 
+enum reset {
+	COLD_RESET,
+	FLR_RESET
+};
+
 /**
  * Helper structure containing file descriptors
  * and bus address related to tested device
@@ -222,10 +227,13 @@ static void driver_bind(struct device_fds *dev)
 }
 
 /* Initiate device reset */
-static void initiate_device_reset(struct device_fds *dev)
+static void initiate_device_reset(struct device_fds *dev, enum reset type)
 {
 	igt_debug("reset device\n");
-	igt_assert(igt_sysfs_set(dev->fds.dev_dir, "reset", "1"));
+
+	if (type == FLR_RESET)
+		igt_assert(igt_sysfs_set(dev->fds.dev_dir, "reset", "1"));
+
 }
 
 static bool is_i915_wedged(int i915)
@@ -274,14 +282,14 @@ static void set_device_filter(const char* dev_path)
 	igt_assert_eq(igt_device_filter_add(filter), 1);
 }
 
-static void unbind_reset_rebind(struct device_fds *dev)
+static void unbind_reset_rebind(struct device_fds *dev, enum reset type)
 {
 	igt_debug("close the device\n");
 	close_if_opened(&dev->fds.dev);
 
 	driver_unbind(dev);
 
-	initiate_device_reset(dev);
+	initiate_device_reset(dev, type);
 
 	driver_bind(dev);
 }
@@ -306,13 +314,13 @@ igt_main
 	igt_describe("Unbinds driver from device, initiates reset"
 		     " then rebinds driver to device");
 	igt_subtest("unbind-reset-rebind") {
-		unbind_reset_rebind(&dev);
+		unbind_reset_rebind(&dev, FLR_RESET);
 		healthcheck(&dev);
 	}
 
 	igt_describe("Resets device with bound driver");
 	igt_subtest("reset-bound") {
-		initiate_device_reset(&dev);
+		initiate_device_reset(&dev, FLR_RESET);
 		healthcheck(&dev);
 	}
 
Signature · 1 line
2.25.1
Reviewed-by on v4 4/5
#18 lore raw

Re: [igt-dev] [PATCH i-g-t v4 4/5] test/device_reset: Refactor initiate_device_reset

Quoted 19 lines · Anshuman Gupta

Added a reset type enum to support multiple types
of reset like WARM, COLD and FLR reset.

No functional change.

v2:
- Removed WARM_RESET enum as not used yet. [Badal]

---
  tests/device_reset.c | 20 ++++++++++++++------
  1 file changed, 14 insertions(+), 6 deletions(-)
tests/device_reset.c +0 -0
index e60d4c7fde..0c477a02c0 100644

tests/device_reset.c IGT_TEST_DESCRIPTION("Examine behavior of a driver on device sysfs reset"); · line 26

Quoted 8 lines
tests/device_reset.c +5 -0
@@ -19,6 +19,11 @@ IGT_TEST_DESCRIPTION("Examine behavior of a driver on device sysfs reset");
  #define DEV_PATH_LEN 80
  #define DEV_BUS_ADDR_LEN 13 /* addr has form 0000:00:00.0 */
 
+enum reset {
+	COLD_RESET,
+	FLR_RESET
+};
+
Quoted 52 lines
tests/device_reset.c +9 -6
  /**
   * Helper structure containing file descriptors
   * and bus address related to tested device
@@ -222,10 +227,13 @@ static void driver_bind(struct device_fds *dev)
  }
 
  /* Initiate device reset */
-static void initiate_device_reset(struct device_fds *dev)
+static void initiate_device_reset(struct device_fds *dev, enum reset type)
  {
  	igt_debug("reset device\n");
-	igt_assert(igt_sysfs_set(dev->fds.dev_dir, "reset", "1"));
+
+	if (type == FLR_RESET)
+		igt_assert(igt_sysfs_set(dev->fds.dev_dir, "reset", "1"));
+
  }
 
  static bool is_i915_wedged(int i915)
@@ -274,14 +282,14 @@ static void set_device_filter(const char* dev_path)
  	igt_assert_eq(igt_device_filter_add(filter), 1);
  }
 
-static void unbind_reset_rebind(struct device_fds *dev)
+static void unbind_reset_rebind(struct device_fds *dev, enum reset type)
  {
  	igt_debug("close the device\n");
  	close_if_opened(&dev->fds.dev);
 
  	driver_unbind(dev);
 
-	initiate_device_reset(dev);
+	initiate_device_reset(dev, type);
 
  	driver_bind(dev);
  }
@@ -306,13 +314,13 @@ igt_main
  	igt_describe("Unbinds driver from device, initiates reset"
  		     " then rebinds driver to device");
  	igt_subtest("unbind-reset-rebind") {
-		unbind_reset_rebind(&dev);
+		unbind_reset_rebind(&dev, FLR_RESET);
  		healthcheck(&dev);
  	}
 
  	igt_describe("Resets device with bound driver");
  	igt_subtest("reset-bound") {
-		initiate_device_reset(&dev);
+		initiate_device_reset(&dev, FLR_RESET);
  		healthcheck(&dev);
  	}
 
#19 lore raw

Re: [igt-dev] [PATCH i-g-t v4 4/5] test/device_reset: Refactor initiate_device_reset

In reply to Anshuman Gupta

Hi Anshuman,

On 2022-11-25 at 13:13:39 +0530, Anshuman Gupta wrote:

please correct message commit (subject):
test/device_reset: Refactor initiate_device_reset
---^ 's' is missing, to

tests/device_reset: Refactor initiate_device_reset

Quoted 33 lines

Added a reset type enum to support multiple types
of reset like WARM, COLD and FLR reset.

No functional change.

v2:
- Removed WARM_RESET enum as not used yet. [Badal]

---
 tests/device_reset.c | 20 ++++++++++++++------
 1 file changed, 14 insertions(+), 6 deletions(-)
tests/device_reset.c +5 -0
index e60d4c7fde..0c477a02c0 100644
@@ -19,6 +19,11 @@ IGT_TEST_DESCRIPTION("Examine behavior of a driver on device sysfs reset");
 #define DEV_PATH_LEN 80
 #define DEV_BUS_ADDR_LEN 13 /* addr has form 0000:00:00.0 */
 
+enum reset {
+	COLD_RESET,
+	FLR_RESET
+};
+
 /**
  * Helper structure containing file descriptors
  * and bus address related to tested device
@@ -222,10 +227,13 @@ static void driver_bind(struct device_fds *dev)
 }
 

tests/device_reset.c static void driver_bind(struct device_fds *dev) · line 236

Quoted 10 lines
tests/device_reset.c +5 -2
 /* Initiate device reset */
-static void initiate_device_reset(struct device_fds *dev)
+static void initiate_device_reset(struct device_fds *dev, enum reset type)
 {
 	igt_debug("reset device\n");
-	igt_assert(igt_sysfs_set(dev->fds.dev_dir, "reset", "1"));
+
+	if (type == FLR_RESET)
+		igt_assert(igt_sysfs_set(dev->fds.dev_dir, "reset", "1"));
+

Remove empty line.

Regards,
Kamil

Quoted 39 lines
tests/device_reset.c +4 -4
 }
 
 static bool is_i915_wedged(int i915)
@@ -274,14 +282,14 @@ static void set_device_filter(const char* dev_path)
 	igt_assert_eq(igt_device_filter_add(filter), 1);
 }
 
-static void unbind_reset_rebind(struct device_fds *dev)
+static void unbind_reset_rebind(struct device_fds *dev, enum reset type)
 {
 	igt_debug("close the device\n");
 	close_if_opened(&dev->fds.dev);
 
 	driver_unbind(dev);
 
-	initiate_device_reset(dev);
+	initiate_device_reset(dev, type);
 
 	driver_bind(dev);
 }
@@ -306,13 +314,13 @@ igt_main
 	igt_describe("Unbinds driver from device, initiates reset"
 		     " then rebinds driver to device");
 	igt_subtest("unbind-reset-rebind") {
-		unbind_reset_rebind(&dev);
+		unbind_reset_rebind(&dev, FLR_RESET);
 		healthcheck(&dev);
 	}
 
 	igt_describe("Resets device with bound driver");
 	igt_subtest("reset-bound") {
-		initiate_device_reset(&dev);
+		initiate_device_reset(&dev, FLR_RESET);
 		healthcheck(&dev);
 	}
 
Signature · 1 line
2.25.1
#20 lore raw

PATCH v4 5/5 tests/device_reset: Add cold reset IGT test

In reply to Anshuman Gupta

Add cold-reset IGT subtest, IGT subtest will use /sys/bus/pci/slots/$SUN/power sysfs in order to initiate a cold reset sequence. $SUN value will be retrieved from PCIe device ACPI firmware node.

v2:
- %s/igt_require(fd > 0)/igt_assert(errno >0)
v3:
- Added Slot Power Controller capability check. [Aravind]
- Check whether slot is powered down before powering up. [Aravind] v4:
- Check power ctrl presence before slot presence to save CI execution time.

---
 lib/igt_pm.c         |  40 +++++++++++
 lib/igt_pm.h         |   1 +
 tests/device_reset.c | 156 ++++++++++++++++++++++++++++++++++++++++---
 3 files changed, 187 insertions(+), 10 deletions(-)
lib/igt_pm.c +40 -0
index 4f0cfbdd10..9b7ed4be64 100644
@@ -877,6 +877,46 @@ static int igt_pm_open_pci_firmware_node(struct pci_device *pci_dev)
 	return dir;
 }
 
+/**
+ * igt_pm_get_pcie_acpihp_slot:
+ * @pci_dev: pci bridge device.
+ * Get pci bridge acpi hotplug slot number, if bridge's ACPI firmware_node
+ * handle supports _SUN method.
+ *
+ * Returns:
+ * PCIe bridge Slot number.
+ * Returns -ENOENT number in case firmware_node/sun is not supported by the
+ * bridge.
+ */
+int igt_pm_get_pcie_acpihp_slot(struct pci_device *pci_dev)
+{
+	int firmware_node_fd, fd, n_read;
+	char sun[8];
+
+	firmware_node_fd = igt_pm_open_pci_firmware_node(pci_dev);
+
+	if (firmware_node_fd < 0 && errno == ENOENT)
+		return -ENOENT;
+
+	igt_require(firmware_node_fd > 0);
+
+	fd = openat(firmware_node_fd, "sun", O_RDONLY);
+	if (fd < 0 && errno == ENOENT) {
+		close(firmware_node_fd);
+		return -ENOENT;
+	}
+
+	igt_assert(errno > 0);
+
+	n_read = read(fd, sun, sizeof(sun));
+	igt_assert(n_read > 0);
+
+	close(firmware_node_fd);
+	close(fd);
+
+	return strtol(sun, NULL, 10);
+}
+
 /**
  * igt_pm_acpi_d3cold_supported:
  * @pci_dev: root port pci_dev.
lib/igt_pm.h +1 -0
index e81fceb897..f65b960c38 100644
@@ -73,6 +73,7 @@ bool igt_wait_for_pm_status(enum igt_runtime_pm_status status);
 bool igt_pm_dmc_loaded(int debugfs);
 bool igt_pm_pc8_plus_residencies_enabled(int msr_fd);
 bool i915_output_is_lpsp_capable(int drm_fd, igt_output_t *output);
+int igt_pm_get_pcie_acpihp_slot(struct pci_device *pci_dev);
 bool igt_pm_acpi_d3cold_supported(struct pci_device *pci_dev);
 enum igt_acpi_d_state
 igt_pm_get_acpi_real_d_state(struct pci_device *pci_dev);
tests/device_reset.c +146 -10

208 lines not on this page · raw message

Signature · 1 line
2.25.1
#21 lore raw

Re: [igt-dev] [PATCH i-g-t v4 5/5] tests/device_reset: Add cold reset IGT test

Hi,

please send new version (v5) in complete, e.g. all patches even those which do not changed.

+cc Marcin

Quoted 50 lines · Anshuman Gupta

Add cold-reset IGT subtest, IGT subtest will use /sys/bus/pci/slots/$SUN/power sysfs in order to initiate a cold reset sequence. $SUN value will be retrieved from PCIe device ACPI firmware node.

v2:
- %s/igt_require(fd > 0)/igt_assert(errno >0)
v3:
- Added Slot Power Controller capability check. [Aravind]
- Check whether slot is powered down before powering up. [Aravind] v4:
- Check power ctrl presence before slot presence to save CI execution time.

---
 lib/igt_pm.c         |  40 +++++++++++
 lib/igt_pm.h         |   1 +
 tests/device_reset.c | 156 ++++++++++++++++++++++++++++++++++++++++---
 3 files changed, 187 insertions(+), 10 deletions(-)
lib/igt_pm.c +20 -0
index 4f0cfbdd10..9b7ed4be64 100644
@@ -877,6 +877,46 @@ static int igt_pm_open_pci_firmware_node(struct pci_device *pci_dev)
 	return dir;
 }
 
+/**
+ * igt_pm_get_pcie_acpihp_slot:
+ * @pci_dev: pci bridge device.
+ * Get pci bridge acpi hotplug slot number, if bridge's ACPI firmware_node
+ * handle supports _SUN method.
+ *
+ * Returns:
+ * PCIe bridge Slot number.
+ * Returns -ENOENT number in case firmware_node/sun is not supported by the
+ * bridge.
+ */
+int igt_pm_get_pcie_acpihp_slot(struct pci_device *pci_dev)
+{
+	int firmware_node_fd, fd, n_read;
+	char sun[8];
+
+	firmware_node_fd = igt_pm_open_pci_firmware_node(pci_dev);
+
+	if (firmware_node_fd < 0 && errno == ENOENT)
+		return -ENOENT;

lib/igt_pm.c static int igt_pm_open_pci_firmware_node(struct pci_device *pci_dev) · line 909

Quoted 10 lines
lib/igt_pm.c +10 -0
+
+	igt_require(firmware_node_fd > 0);
+
+	fd = openat(firmware_node_fd, "sun", O_RDONLY);
+	if (fd < 0 && errno == ENOENT) {
+		close(firmware_node_fd);
+		return -ENOENT;
+	}
+
+	igt_assert(errno > 0);

------- ^
Check for fd > 0 here.

lib/igt_pm.c static int igt_pm_open_pci_firmware_node(struct pci_device *pci_dev) · line 912

Quoted 3 lines
lib/igt_pm.c +3 -0
+
+	n_read = read(fd, sun, sizeof(sun));
+	igt_assert(n_read > 0);

------- ^
Move this assert after close, add also

	igt_assert(n_read < 8);

lib/igt_pm.c static int igt_pm_open_pci_firmware_node(struct pci_device *pci_dev) · line 915

Quoted 3 lines
lib/igt_pm.c +3 -0
+
+	close(firmware_node_fd);
+	close(fd);

Add zero to string end, sun[n_read] = 0;

Quoted 69 lines
lib/igt_pm.c +4 -0
+
+	return strtol(sun, NULL, 10);
+}
+
 /**
  * igt_pm_acpi_d3cold_supported:
  * @pci_dev: root port pci_dev.
lib/igt_pm.h +1 -0
index e81fceb897..f65b960c38 100644
@@ -73,6 +73,7 @@ bool igt_wait_for_pm_status(enum igt_runtime_pm_status status);
 bool igt_pm_dmc_loaded(int debugfs);
 bool igt_pm_pc8_plus_residencies_enabled(int msr_fd);
 bool i915_output_is_lpsp_capable(int drm_fd, igt_output_t *output);
+int igt_pm_get_pcie_acpihp_slot(struct pci_device *pci_dev);
 bool igt_pm_acpi_d3cold_supported(struct pci_device *pci_dev);
 enum igt_acpi_d_state
 igt_pm_get_acpi_real_d_state(struct pci_device *pci_dev);
tests/device_reset.c +27 -0
index 0c477a02c0..b65395fbb9 100644
@@ -9,7 +9,9 @@
 
 #include "i915/gem.h"
 #include "igt.h"
+#include "igt_device.h"
 #include "igt_device_scan.h"
+#include "igt_pci.h"
 #include "igt_sysfs.h"
 #include "igt_kmod.h"
 
@@ -33,6 +35,7 @@ struct device_fds {
 		int dev;
 		int dev_dir;
 		int drv_dir;
+		int slot_dir; /* pci hotplug slots fd */
 	} fds;
 	char dev_bus_addr[DEV_BUS_ADDR_LEN];
 	bool snd_unload;
@@ -62,6 +65,74 @@ static int open_driver_sysfs_dir(int fd)
 	return __open_sysfs_dir(fd, "device/driver");
 }
 
+static bool is_pci_power_ctrl_present(struct pci_device *dev)
+{
+	int offset;
+	uint32_t slot_cap;
+
+	offset = find_pci_cap_offset(dev, PCI_EXPRESS_CAP_ID);
+	igt_require_f(offset > 0, "PCI Express Capability not found\n");
+	igt_assert(!pci_device_cfg_read_u32(dev, &slot_cap, offset + PCI_SLOT_CAP_OFFSET));
+	igt_debug("slot cap register 0x%x\n", slot_cap);
+
+	return slot_cap & PCI_SLOT_PWR_CTRL_PRESENT;
+}
+
+static bool is_slot_power_ctrl_present(int fd)
+{
+	struct pci_device *root;
+
+	/*
+	 * Card root port Slot Capabilities Register
+	 * determines Power Controller Presence.
+	 */
+	root = igt_device_get_pci_root_port(fd);
+	return is_pci_power_ctrl_present(root);
+}

tests/device_reset.c static int open_driver_sysfs_dir(int fd) · line 101

Quoted 10 lines
tests/device_reset.c +10 -0
+
+static int open_slot_sysfs_dir(int fd)
+{
+	struct pci_device *pci_dev = NULL;
+	int slot_fd = -1, slot;
+	char slot_fd_path[PATH_MAX];
+
+	/* Don't search for slot if root port doesn't support power ctrl */
+	if (!is_slot_power_ctrl_present(fd))
+		return slot_fd;

---------------------- ^
-1 would be better or maybe -ENOTSUP ?

Quoted 15 lines
tests/device_reset.c +15 -0
+
+	pci_dev = igt_device_get_pci_device(fd);
+	igt_require(pci_dev);
+
+	while ((pci_dev = pci_device_get_parent_bridge(pci_dev))) {
+		slot = igt_pm_get_pcie_acpihp_slot(pci_dev);
+		if (slot == -ENOENT) {
+			igt_debug("Bridge PCI device %04x:%02x:%02x.%01x does not support acpihp slot\n",
+				  pci_dev->domain, pci_dev->bus, pci_dev->dev, pci_dev->func);
+			continue;
+		}
+
+		/*
+		 * Upon getting the valid acpihp slot number break the loop.
+		 * It is the desired acpihp slot for gfx card.

tests/device_reset.c static int open_driver_sysfs_dir(int fd) · line 126

Quoted 10 lines
tests/device_reset.c +10 -0
+		 */
+		if (slot > 0) {
+			igt_debug("Bridge PCI device %04x:%02x:%02x.%01x associated acpihp slot %d\n",
+				  pci_dev->domain, pci_dev->bus, pci_dev->dev, pci_dev->func, slot);
+			break;
+		}
+	}
+
+	if (!pci_dev)
+		return slot_fd;

---------------------- ^
-1 would be better

Quoted 81 lines
tests/device_reset.c +47 -1
+
+	snprintf(slot_fd_path, PATH_MAX, "/sys/bus/pci/slots/%d", slot);
+	slot_fd = open(slot_fd_path, O_RDONLY);
+	if (slot_fd < 0)
+		return -errno;
+
+	return slot_fd;
+}
+
 /**
  * device_sysfs_path:
  * @fd: opened device file descriptor
@@ -124,6 +195,8 @@ static void init_device_fds(struct device_fds *dev)
 
 	dev->fds.drv_dir = open_driver_sysfs_dir(dev->fds.dev);
 	igt_assert_fd(dev->fds.drv_dir);
+
+	dev->fds.slot_dir = open_slot_sysfs_dir(dev->fds.dev);
 }
 
 static int close_if_opened(int *fd)
@@ -142,6 +215,7 @@ static void cleanup_device_fds(struct device_fds *dev)
 	igt_ignore_warn(close_if_opened(&dev->fds.dev));
 	igt_ignore_warn(close_if_opened(&dev->fds.dev_dir));
 	igt_ignore_warn(close_if_opened(&dev->fds.drv_dir));
+	igt_ignore_warn(close_if_opened(&dev->fds.slot_dir));
 }
 
 /**
@@ -179,6 +253,35 @@ static bool is_sysfs_reset_supported(int fd)
 	return true;
 }
 
+/**
+ * is_sysfs_cold_reset_supported:
+ * @fd: opened device file descriptor
+ *
+ * Check if device supports cold reset based on sysfs file presence.
+ *
+ * Returns:
+ * True if device supports reset, false otherwise.
+ */
+static bool is_sysfs_cold_reset_supported(int slot_fd)
+{
+	struct stat st;
+	int rc;
+	int cold_reset_fd = -1;
+
+	cold_reset_fd = openat(slot_fd, "power", O_WRONLY);
+
+	if (cold_reset_fd < 0)
+		return false;
+
+	rc = fstat(cold_reset_fd, &st);
+	close(cold_reset_fd);
+
+	if (rc || !S_ISREG(st.st_mode))
+		return false;
+
+	return true;
+}
+
 /* Unbind the driver from the device */
 static void driver_unbind(struct device_fds *dev)
 {
@@ -231,8 +334,13 @@ static void initiate_device_reset(struct device_fds *dev, enum reset type)
 {
 	igt_debug("reset device\n");
 
-	if (type == FLR_RESET)
+	if (type == FLR_RESET) {
 		igt_assert(igt_sysfs_set(dev->fds.dev_dir, "reset", "1"));
+	} else if (type == COLD_RESET) {
+		igt_assert(igt_sysfs_set(dev->fds.slot_dir, "power", "0"));
+		igt_assert(!igt_sysfs_get_boolean(dev->fds.slot_dir, "power"));
+		igt_assert(igt_sysfs_set(dev->fds.slot_dir, "power", "1"));
+	}
 
 }
 

tests/device_reset.c igt_main · line 422

Quoted 9 lines
tests/device_reset.c +1 -5
@@ -311,17 +419,45 @@ igt_main
 		igt_skip_on(!is_sysfs_reset_supported(dev.fds.dev));
 	}
 
-	igt_describe("Unbinds driver from device, initiates reset"
-		     " then rebinds driver to device");
-	igt_subtest("unbind-reset-rebind") {
-		unbind_reset_rebind(&dev, FLR_RESET);
-		healthcheck(&dev);
+	igt_subtest_group {

Why do you move these into group ?

tests/device_reset.c igt_main · line 432

Quoted 10 lines
tests/device_reset.c +10 -0
+		igt_describe("Unbinds driver from device, initiates reset"
+			     " then rebinds driver to device");
+		igt_subtest("unbind-reset-rebind") {
+			unbind_reset_rebind(&dev, FLR_RESET);
+			healthcheck(&dev);
+		}
+
+		igt_describe("Resets device with bound driver");
+		igt_subtest("reset-bound") {
+			initiate_device_reset(&dev, FLR_RESET);

--------------------------------------------------- ^

tests/device_reset.c igt_main · line 434

Quoted 2 lines
tests/device_reset.c +2 -0
+			/*
+			 * Cold reset will initiate card boot sequence again,

-------------------------- ^
This comment is missplaced.

Regards,
Kamil

Quoted 36 lines
tests/device_reset.c +24 -4
+			 * therefore let healthcheck() re-epen the dev fd.
+			 */
+			dev.fds.dev = -1;
+			healthcheck(&dev);
+		}
 	}
 
-	igt_describe("Resets device with bound driver");
-	igt_subtest("reset-bound") {
-		initiate_device_reset(&dev, FLR_RESET);
-		healthcheck(&dev);
+	igt_subtest_group {
+		igt_fixture {
+			igt_skip_on_f(dev.fds.slot_dir < 0, "Gfx Card does not support any "
+				      "pcie slot for cold reset\n");
+			igt_skip_on(!is_sysfs_cold_reset_supported(dev.fds.slot_dir));
+		}
+
+		igt_describe("Unbinds driver from device, initiates cold reset"
+			     " then rebinds driver to device");
+		igt_subtest("unbind-cold-reset-rebind") {
+			unbind_reset_rebind(&dev, COLD_RESET);
+			healthcheck(&dev);
+		}
+
+		igt_describe("Cold Resets device with bound driver");
+		igt_subtest("cold-reset-bound") {
+			initiate_device_reset(&dev, COLD_RESET);
+			healthcheck(&dev);
+		}
 	}
 
 	igt_fixture {
Signature · 1 line
2.25.1
#22 lore raw

Re: [igt-dev] [PATCH i-g-t v4 5/5] tests/device_reset: Add cold reset IGT test

In reply to Anshuman Gupta

Hi Anshuman,

Quoted 124 lines · Anshuman Gupta

Add cold-reset IGT subtest, IGT subtest will use /sys/bus/pci/slots/$SUN/power sysfs in order to initiate a cold reset sequence. $SUN value will be retrieved from PCIe device ACPI firmware node.

v2:
- %s/igt_require(fd > 0)/igt_assert(errno >0)
v3:
- Added Slot Power Controller capability check. [Aravind]
- Check whether slot is powered down before powering up. [Aravind] v4:
- Check power ctrl presence before slot presence to save CI execution time.

---
  lib/igt_pm.c         |  40 +++++++++++
  lib/igt_pm.h         |   1 +
  tests/device_reset.c | 156 ++++++++++++++++++++++++++++++++++++++++---
  3 files changed, 187 insertions(+), 10 deletions(-)
lib/igt_pm.c +40 -0
index 4f0cfbdd10..9b7ed4be64 100644
@@ -877,6 +877,46 @@ static int igt_pm_open_pci_firmware_node(struct pci_device *pci_dev)
  	return dir;
  }
 
+/**
+ * igt_pm_get_pcie_acpihp_slot:
+ * @pci_dev: pci bridge device.
+ * Get pci bridge acpi hotplug slot number, if bridge's ACPI firmware_node
+ * handle supports _SUN method.
+ *
+ * Returns:
+ * PCIe bridge Slot number.
+ * Returns -ENOENT number in case firmware_node/sun is not supported by the
+ * bridge.
+ */
+int igt_pm_get_pcie_acpihp_slot(struct pci_device *pci_dev)
+{
+	int firmware_node_fd, fd, n_read;
+	char sun[8];
+
+	firmware_node_fd = igt_pm_open_pci_firmware_node(pci_dev);
+
+	if (firmware_node_fd < 0 && errno == ENOENT)
+		return -ENOENT;
+
+	igt_require(firmware_node_fd > 0);
+
+	fd = openat(firmware_node_fd, "sun", O_RDONLY);
+	if (fd < 0 && errno == ENOENT) {
+		close(firmware_node_fd);
+		return -ENOENT;
+	}
+
+	igt_assert(errno > 0);
+
+	n_read = read(fd, sun, sizeof(sun));
+	igt_assert(n_read > 0);
+
+	close(firmware_node_fd);
+	close(fd);
+
+	return strtol(sun, NULL, 10);
+}
+
  /**
   * igt_pm_acpi_d3cold_supported:
   * @pci_dev: root port pci_dev.
lib/igt_pm.h +1 -0
index e81fceb897..f65b960c38 100644
@@ -73,6 +73,7 @@ bool igt_wait_for_pm_status(enum igt_runtime_pm_status status);
  bool igt_pm_dmc_loaded(int debugfs);
  bool igt_pm_pc8_plus_residencies_enabled(int msr_fd);
  bool i915_output_is_lpsp_capable(int drm_fd, igt_output_t *output);
+int igt_pm_get_pcie_acpihp_slot(struct pci_device *pci_dev);
  bool igt_pm_acpi_d3cold_supported(struct pci_device *pci_dev);
  enum igt_acpi_d_state
  igt_pm_get_acpi_real_d_state(struct pci_device *pci_dev);
tests/device_reset.c +16 -0
index 0c477a02c0..b65395fbb9 100644
@@ -9,7 +9,9 @@
 
  #include "i915/gem.h"
  #include "igt.h"
+#include "igt_device.h"
  #include "igt_device_scan.h"
+#include "igt_pci.h"
  #include "igt_sysfs.h"
  #include "igt_kmod.h"
 
@@ -33,6 +35,7 @@ struct device_fds {
  		int dev;
  		int dev_dir;
  		int drv_dir;
+		int slot_dir; /* pci hotplug slots fd */
  	} fds;
  	char dev_bus_addr[DEV_BUS_ADDR_LEN];
  	bool snd_unload;
@@ -62,6 +65,74 @@ static int open_driver_sysfs_dir(int fd)
  	return __open_sysfs_dir(fd, "device/driver");
  }
 
+static bool is_pci_power_ctrl_present(struct pci_device *dev)
+{
+	int offset;
+	uint32_t slot_cap;
+
+	offset = find_pci_cap_offset(dev, PCI_EXPRESS_CAP_ID);
+	igt_require_f(offset > 0, "PCI Express Capability not found\n");
+	igt_assert(!pci_device_cfg_read_u32(dev, &slot_cap, offset + PCI_SLOT_CAP_OFFSET));
+	igt_debug("slot cap register 0x%x\n", slot_cap);
+
+	return slot_cap & PCI_SLOT_PWR_CTRL_PRESENT;
+}
+

tests/device_reset.c static int open_driver_sysfs_dir(int fd) · line 90

Quoted 10 lines
tests/device_reset.c +10 -0
+static bool is_slot_power_ctrl_present(int fd)
+{
+	struct pci_device *root;
+
+	/*
+	 * Card root port Slot Capabilities Register
+	 * determines Power Controller Presence.
+	 */
+	root = igt_device_get_pci_root_port(fd);
+	return is_pci_power_ctrl_present(root);

Why power controller capability of root port is checked here?
Shouldn't we check the power controller capability of downstream switch/bridge on which slot is found?

Regards,
Badal

Quoted 171 lines
tests/device_reset.c +120 -10
+}
+
+static int open_slot_sysfs_dir(int fd)
+{
+	struct pci_device *pci_dev = NULL;
+	int slot_fd = -1, slot;
+	char slot_fd_path[PATH_MAX];
+
+	/* Don't search for slot if root port doesn't support power ctrl */
+	if (!is_slot_power_ctrl_present(fd))
+		return slot_fd;
+
+	pci_dev = igt_device_get_pci_device(fd);
+	igt_require(pci_dev);
+
+	while ((pci_dev = pci_device_get_parent_bridge(pci_dev))) {
+		slot = igt_pm_get_pcie_acpihp_slot(pci_dev);
+		if (slot == -ENOENT) {
+			igt_debug("Bridge PCI device %04x:%02x:%02x.%01x does not support acpihp slot\n",
+				  pci_dev->domain, pci_dev->bus, pci_dev->dev, pci_dev->func);
+			continue;
+		}
+
+		/*
+		 * Upon getting the valid acpihp slot number break the loop.
+		 * It is the desired acpihp slot for gfx card.
+		 */
+		if (slot > 0) {
+			igt_debug("Bridge PCI device %04x:%02x:%02x.%01x associated acpihp slot %d\n",
+				  pci_dev->domain, pci_dev->bus, pci_dev->dev, pci_dev->func, slot);
+			break;
+		}
+	}
+
+	if (!pci_dev)
+		return slot_fd;
+
+	snprintf(slot_fd_path, PATH_MAX, "/sys/bus/pci/slots/%d", slot);
+	slot_fd = open(slot_fd_path, O_RDONLY);
+	if (slot_fd < 0)
+		return -errno;
+
+	return slot_fd;
+}
+
  /**
   * device_sysfs_path:
   * @fd: opened device file descriptor
@@ -124,6 +195,8 @@ static void init_device_fds(struct device_fds *dev)
 
  	dev->fds.drv_dir = open_driver_sysfs_dir(dev->fds.dev);
  	igt_assert_fd(dev->fds.drv_dir);
+
+	dev->fds.slot_dir = open_slot_sysfs_dir(dev->fds.dev);
  }
 
  static int close_if_opened(int *fd)
@@ -142,6 +215,7 @@ static void cleanup_device_fds(struct device_fds *dev)
  	igt_ignore_warn(close_if_opened(&dev->fds.dev));
  	igt_ignore_warn(close_if_opened(&dev->fds.dev_dir));
  	igt_ignore_warn(close_if_opened(&dev->fds.drv_dir));
+	igt_ignore_warn(close_if_opened(&dev->fds.slot_dir));
  }
 
  /**
@@ -179,6 +253,35 @@ static bool is_sysfs_reset_supported(int fd)
  	return true;
  }
 
+/**
+ * is_sysfs_cold_reset_supported:
+ * @fd: opened device file descriptor
+ *
+ * Check if device supports cold reset based on sysfs file presence.
+ *
+ * Returns:
+ * True if device supports reset, false otherwise.
+ */
+static bool is_sysfs_cold_reset_supported(int slot_fd)
+{
+	struct stat st;
+	int rc;
+	int cold_reset_fd = -1;
+
+	cold_reset_fd = openat(slot_fd, "power", O_WRONLY);
+
+	if (cold_reset_fd < 0)
+		return false;
+
+	rc = fstat(cold_reset_fd, &st);
+	close(cold_reset_fd);
+
+	if (rc || !S_ISREG(st.st_mode))
+		return false;
+
+	return true;
+}
+
  /* Unbind the driver from the device */
  static void driver_unbind(struct device_fds *dev)
  {
@@ -231,8 +334,13 @@ static void initiate_device_reset(struct device_fds *dev, enum reset type)
  {
  	igt_debug("reset device\n");
 
-	if (type == FLR_RESET)
+	if (type == FLR_RESET) {
  		igt_assert(igt_sysfs_set(dev->fds.dev_dir, "reset", "1"));
+	} else if (type == COLD_RESET) {
+		igt_assert(igt_sysfs_set(dev->fds.slot_dir, "power", "0"));
+		igt_assert(!igt_sysfs_get_boolean(dev->fds.slot_dir, "power"));
+		igt_assert(igt_sysfs_set(dev->fds.slot_dir, "power", "1"));
+	}
 
  }
 
@@ -311,17 +419,45 @@ igt_main
  		igt_skip_on(!is_sysfs_reset_supported(dev.fds.dev));
  	}
 
-	igt_describe("Unbinds driver from device, initiates reset"
-		     " then rebinds driver to device");
-	igt_subtest("unbind-reset-rebind") {
-		unbind_reset_rebind(&dev, FLR_RESET);
-		healthcheck(&dev);
+	igt_subtest_group {
+		igt_describe("Unbinds driver from device, initiates reset"
+			     " then rebinds driver to device");
+		igt_subtest("unbind-reset-rebind") {
+			unbind_reset_rebind(&dev, FLR_RESET);
+			healthcheck(&dev);
+		}
+
+		igt_describe("Resets device with bound driver");
+		igt_subtest("reset-bound") {
+			initiate_device_reset(&dev, FLR_RESET);
+			/*
+			 * Cold reset will initiate card boot sequence again,
+			 * therefore let healthcheck() re-epen the dev fd.
+			 */
+			dev.fds.dev = -1;
+			healthcheck(&dev);
+		}
  	}
 
-	igt_describe("Resets device with bound driver");
-	igt_subtest("reset-bound") {
-		initiate_device_reset(&dev, FLR_RESET);
-		healthcheck(&dev);
+	igt_subtest_group {
+		igt_fixture {
+			igt_skip_on_f(dev.fds.slot_dir < 0, "Gfx Card does not support any "
+				      "pcie slot for cold reset\n");
+			igt_skip_on(!is_sysfs_cold_reset_supported(dev.fds.slot_dir));
+		}
+
+		igt_describe("Unbinds driver from device, initiates cold reset"
+			     " then rebinds driver to device");
+		igt_subtest("unbind-cold-reset-rebind") {
+			unbind_reset_rebind(&dev, COLD_RESET);
+			healthcheck(&dev);
+		}
+
+		igt_describe("Cold Resets device with bound driver");
+		igt_subtest("cold-reset-bound") {
+			initiate_device_reset(&dev, COLD_RESET);
+			healthcheck(&dev);
+		}
  	}
 
  	igt_fixture {
#23 lore raw

Re: [igt-dev] [PATCH i-g-t v4 5/5] tests/device_reset: Add cold reset IGT test

Quoted 139 lines

-----Original Message-----
From: Nilawar, Badal <[email protected]>
Sent: Wednesday, November 30, 2022 6:55 PM
To: Gupta, Anshuman <[email protected]>; igt- [email protected]
Cc: Vivi, Rodrigo <[email protected]>; [email protected]; Tangudu, Tilak <[email protected]>; Iddamsetty, Aravind <[email protected]>; Dixit, Ashutosh <[email protected]>
Subject: Re: [PATCH i-g-t v4 5/5] tests/device_reset: Add cold reset IGT test

Hi Anshuman,

Quoted 14 lines · Anshuman Gupta

Add cold-reset IGT subtest, IGT subtest will use /sys/bus/pci/slots/$SUN/power sysfs in order to initiate a cold reset sequence. $SUN value will be retrieved from PCIe device ACPI firmware node.

v2:
- %s/igt_require(fd > 0)/igt_assert(errno >0)
v3:
- Added Slot Power Controller capability check. [Aravind]
- Check whether slot is powered down before powering up. [Aravind] v4:
- Check power ctrl presence before slot presence to save CI execution time.

Quoted 6 lines
---
  lib/igt_pm.c         |  40 +++++++++++
  lib/igt_pm.h         |   1 +
  tests/device_reset.c | 156

++++++++++++++++++++++++++++++++++++++++---

lib/igt_pm.c static int igt_pm_open_pci_firmware_node(struct

Quoted 7 lines
  3 files changed, 187 insertions(+), 10 deletions(-)
lib/igt_pm.c index 4f0cfbdd10..9b7ed4be64 renamed from lib/igt_pm.c +0 -0

100644

lib/igt_pm.c +0 -0
@@ -877,6 +877,46 @@ static int igt_pm_open_pci_firmware_node(struct

pci_device *pci_dev)

lib/igt_pm.h bool igt_wait_for_pm_status(enum

Quoted 52 lines
lib/igt_pm.c +41 -0
  	return dir;
  }
 
+/**
+ * igt_pm_get_pcie_acpihp_slot:
+ * @pci_dev: pci bridge device.
+ * Get pci bridge acpi hotplug slot number, if bridge's ACPI
+firmware_node
+ * handle supports _SUN method.
+ *
+ * Returns:
+ * PCIe bridge Slot number.
+ * Returns -ENOENT number in case firmware_node/sun is not supported
+by the
+ * bridge.
+ */
+int igt_pm_get_pcie_acpihp_slot(struct pci_device *pci_dev) {
+	int firmware_node_fd, fd, n_read;
+	char sun[8];
+
+	firmware_node_fd = igt_pm_open_pci_firmware_node(pci_dev);
+
+	if (firmware_node_fd < 0 && errno == ENOENT)
+		return -ENOENT;
+
+	igt_require(firmware_node_fd > 0);
+
+	fd = openat(firmware_node_fd, "sun", O_RDONLY);
+	if (fd < 0 && errno == ENOENT) {
+		close(firmware_node_fd);
+		return -ENOENT;
+	}
+
+	igt_assert(errno > 0);
+
+	n_read = read(fd, sun, sizeof(sun));
+	igt_assert(n_read > 0);
+
+	close(firmware_node_fd);
+	close(fd);
+
+	return strtol(sun, NULL, 10);
+}
+
  /**
   * igt_pm_acpi_d3cold_supported:
   * @pci_dev: root port pci_dev.
lib/igt_pm.h index e81fceb897..f65b960c38 renamed from lib/igt_pm.h +0 -0

100644

lib/igt_pm.h +0 -0
@@ -73,6 +73,7 @@ bool igt_wait_for_pm_status(enum

igt_runtime_pm_status status);

Quoted 30 lines
lib/igt_pm.h +1 -0
  bool igt_pm_dmc_loaded(int debugfs);
  bool igt_pm_pc8_plus_residencies_enabled(int msr_fd);
  bool i915_output_is_lpsp_capable(int drm_fd, igt_output_t *output);
+int igt_pm_get_pcie_acpihp_slot(struct pci_device *pci_dev);
  bool igt_pm_acpi_d3cold_supported(struct pci_device *pci_dev);
  enum igt_acpi_d_state
  igt_pm_get_acpi_real_d_state(struct pci_device *pci_dev); diff --git

a/tests/device_reset.c b/tests/device_reset.c index 0c477a02c0..b65395fbb9 100644

tests/device_reset.c +3 -0
@@ -9,7 +9,9 @@
 
  #include "i915/gem.h"
  #include "igt.h"
+#include "igt_device.h"
  #include "igt_device_scan.h"
+#include "igt_pci.h"
  #include "igt_sysfs.h"
  #include "igt_kmod.h"
 
@@ -33,6 +35,7 @@ struct device_fds {
  		int dev;
  		int dev_dir;
  		int drv_dir;
+		int slot_dir; /* pci hotplug slots fd */
  	} fds;
  	char dev_bus_addr[DEV_BUS_ADDR_LEN];
  	bool snd_unload;

tests/device_reset.c static int open_driver_sysfs_dir(int fd) · line 74

Quoted 10 lines
tests/device_reset.c +7 -0
@@ -62,6 +65,74 @@ static int open_driver_sysfs_dir(int fd)
  	return __open_sysfs_dir(fd, "device/driver");
  }
 
+static bool is_pci_power_ctrl_present(struct pci_device *dev) {
+	int offset;
+	uint32_t slot_cap;
+
+	offset = find_pci_cap_offset(dev, PCI_EXPRESS_CAP_ID);
+	igt_require_f(offset > 0, "PCI Express Capability not found\n");
+	igt_assert(!pci_device_cfg_read_u32(dev, &slot_cap, offset +

PCI_SLOT_CAP_OFFSET));

Quoted 16 lines

tests/device_reset.c static int open_driver_sysfs_dir(int fd) · line 90

Quoted 13 lines
tests/device_reset.c +13 -0
+	igt_debug("slot cap register 0x%x\n", slot_cap);
+
+	return slot_cap & PCI_SLOT_PWR_CTRL_PRESENT; }
+
+static bool is_slot_power_ctrl_present(int fd) {
+	struct pci_device *root;
+
+	/*
+	 * Card root port Slot Capabilities Register
+	 * determines Power Controller Presence.
+	 */
+	root = igt_device_get_pci_root_port(fd);
+	return is_pci_power_ctrl_present(root);

Why power controller capability of root port is checked here? Shouldn't we check the power controller capability of downstream switch/bridge on which slot is found?

This is to switch on/off the power of card and as per PCI specs the slot capability register Are only applicable to downstream port or root port. Not for upstream switch port. Therefore we only requires to check for root port because we are operating on card here. BR,
Anshuman Gupta.

Quoted 182 lines

Regards,
Badal

Quoted 8 lines
tests/device_reset.c +8 -0
+}
+
+static int open_slot_sysfs_dir(int fd) {
+	struct pci_device *pci_dev = NULL;
+	int slot_fd = -1, slot;
+	char slot_fd_path[PATH_MAX];
+
+	/* Don't search for slot if root port doesn't support power ctrl */

tests/device_reset.c static int open_driver_sysfs_dir(int fd)

Quoted 10 lines
tests/device_reset.c +10 -0
+	if (!is_slot_power_ctrl_present(fd))
+		return slot_fd;
+
+	pci_dev = igt_device_get_pci_device(fd);
+	igt_require(pci_dev);
+
+	while ((pci_dev = pci_device_get_parent_bridge(pci_dev))) {
+		slot = igt_pm_get_pcie_acpihp_slot(pci_dev);
+		if (slot == -ENOENT) {
+			igt_debug("Bridge PCI device %04x:%02x:%02x.%01x

does not support acpihp slot\n",

tests/device_reset.c static int open_driver_sysfs_dir(int fd)

Quoted 11 lines
tests/device_reset.c +10 -0
+				  pci_dev->domain, pci_dev->bus, pci_dev-
 dev, pci_dev->func);
+			continue;
+		}
+
+		/*
+		 * Upon getting the valid acpihp slot number break the loop.
+		 * It is the desired acpihp slot for gfx card.
+		 */
+		if (slot > 0) {
+			igt_debug("Bridge PCI device %04x:%02x:%02x.%01x

associated acpihp slot %d\n",

tests/device_reset.c static void cleanup_device_fds(struct device_fds

Quoted 30 lines
tests/device_reset.c +16 -0
+				  pci_dev->domain, pci_dev->bus, pci_dev-
 dev, pci_dev->func, slot);
+			break;
+		}
+	}
+
+	if (!pci_dev)
+		return slot_fd;
+
+	snprintf(slot_fd_path, PATH_MAX, "/sys/bus/pci/slots/%d", slot);
+	slot_fd = open(slot_fd_path, O_RDONLY);
+	if (slot_fd < 0)
+		return -errno;
+
+	return slot_fd;
+}
+
  /**
   * device_sysfs_path:
   * @fd: opened device file descriptor @@ -124,6 +195,8 @@ static

void init_device_fds(struct device_fds *dev)

  	dev->fds.drv_dir = open_driver_sysfs_dir(dev->fds.dev);
  	igt_assert_fd(dev->fds.drv_dir);
tests/device_reset.c +2 -0
+
+	dev->fds.slot_dir = open_slot_sysfs_dir(dev->fds.dev);
  }
 
  static int close_if_opened(int *fd)
@@ -142,6 +215,7 @@ static void cleanup_device_fds(struct device_fds

*dev)

tests/device_reset.c static void initiate_device_reset(struct device_fds

Quoted 43 lines
tests/device_reset.c +29 -0
  	igt_ignore_warn(close_if_opened(&dev->fds.dev));
  	igt_ignore_warn(close_if_opened(&dev->fds.dev_dir));
  	igt_ignore_warn(close_if_opened(&dev->fds.drv_dir));
+	igt_ignore_warn(close_if_opened(&dev->fds.slot_dir));
  }
 
  /**
@@ -179,6 +253,35 @@ static bool is_sysfs_reset_supported(int fd)
  	return true;
  }
 
+/**
+ * is_sysfs_cold_reset_supported:
+ * @fd: opened device file descriptor
+ *
+ * Check if device supports cold reset based on sysfs file presence.
+ *
+ * Returns:
+ * True if device supports reset, false otherwise.
+ */
+static bool is_sysfs_cold_reset_supported(int slot_fd) {
+	struct stat st;
+	int rc;
+	int cold_reset_fd = -1;
+
+	cold_reset_fd = openat(slot_fd, "power", O_WRONLY);
+
+	if (cold_reset_fd < 0)
+		return false;
+
+	rc = fstat(cold_reset_fd, &st);
+	close(cold_reset_fd);
+
+	if (rc || !S_ISREG(st.st_mode))
+		return false;
+
+	return true;
+}
+
  /* Unbind the driver from the device */
  static void driver_unbind(struct device_fds *dev)
  {
@@ -231,8 +334,13 @@ static void initiate_device_reset(struct device_fds

*dev, enum reset type)

tests/device_reset.c static void initiate_device_reset(struct device_fds *dev, enum reset type)

Quoted 9 lines
tests/device_reset.c +4 -1
  {
  	igt_debug("reset device\n");
 
-	if (type == FLR_RESET)
+	if (type == FLR_RESET) {
  		igt_assert(igt_sysfs_set(dev->fds.dev_dir, "reset", "1"));
+	} else if (type == COLD_RESET) {
+		igt_assert(igt_sysfs_set(dev->fds.slot_dir, "power", "0"));
+		igt_assert(!igt_sysfs_get_boolean(dev->fds.slot_dir,

"power"));

Quoted 31 lines
tests/device_reset.c +19 -5
+		igt_assert(igt_sysfs_set(dev->fds.slot_dir, "power", "1"));
+	}
 
  }
 
@@ -311,17 +419,45 @@ igt_main
  		igt_skip_on(!is_sysfs_reset_supported(dev.fds.dev));
  	}
 
-	igt_describe("Unbinds driver from device, initiates reset"
-		     " then rebinds driver to device");
-	igt_subtest("unbind-reset-rebind") {
-		unbind_reset_rebind(&dev, FLR_RESET);
-		healthcheck(&dev);
+	igt_subtest_group {
+		igt_describe("Unbinds driver from device, initiates reset"
+			     " then rebinds driver to device");
+		igt_subtest("unbind-reset-rebind") {
+			unbind_reset_rebind(&dev, FLR_RESET);
+			healthcheck(&dev);
+		}
+
+		igt_describe("Resets device with bound driver");
+		igt_subtest("reset-bound") {
+			initiate_device_reset(&dev, FLR_RESET);
+			/*
+			 * Cold reset will initiate card boot sequence again,
+			 * therefore let healthcheck() re-epen the dev fd.
+			 */
+			dev.fds.dev = -1;
+			healthcheck(&dev);

tests/device_reset.c igt_main · line 444

Quoted 10 lines
tests/device_reset.c +4 -4
+		}
  	}
 
-	igt_describe("Resets device with bound driver");
-	igt_subtest("reset-bound") {
-		initiate_device_reset(&dev, FLR_RESET);
-		healthcheck(&dev);
+	igt_subtest_group {
+		igt_fixture {
+			igt_skip_on_f(dev.fds.slot_dir < 0, "Gfx Card does

not support any "

tests/device_reset.c igt_main · line 446

Quoted 2 lines
tests/device_reset.c +2 -0
+				      "pcie slot for cold reset\n");
+
	igt_skip_on(!is_sysfs_cold_reset_supported(dev.fds.slot_dir));

tests/device_reset.c igt_main · line 449

Quoted 3 lines
tests/device_reset.c +3 -0
+		}
+
+		igt_describe("Unbinds driver from device, initiates cold

reset"

Quoted 14 lines
tests/device_reset.c +11 -0
+			     " then rebinds driver to device");
+		igt_subtest("unbind-cold-reset-rebind") {
+			unbind_reset_rebind(&dev, COLD_RESET);
+			healthcheck(&dev);
+		}
+
+		igt_describe("Cold Resets device with bound driver");
+		igt_subtest("cold-reset-bound") {
+			initiate_device_reset(&dev, COLD_RESET);
+			healthcheck(&dev);
+		}
  	}
 
  	igt_fixture {
#24 lore raw

[igt-dev] ✓ Fi.CI.BAT: success for Cold Reset IGT Test

In reply to Anshuman Gupta
== Series Details ==

== Series Details ==

Series: Cold Reset IGT Test
URL : https://patchwork.freedesktop.org/series/111245/
State : success

== Summary ==

CI Bug Log - changes from CI_DRM_12420 -> IGTPW_8144
====================================================

Summary
-------

**SUCCESS**

No regressions found.

External URL: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8144/index.html

Participating hosts (35 -> 35)
------------------------------

Additional (3): bat-kbl-2 bat-jsl-3 bat-dg1-5
Missing (3): fi-kbl-soraka fi-rkl-11600 bat-atsm-1

Known issues
------------

Here are the changes found in IGTPW_8144 that come from known issues:

### IGT changes ###

#### Issues hit ####

* igt@gem_mmap@basic:
- bat-dg1-5: NOTRUN -> [SKIP][1] ([i915#4083])
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8144/bat-dg1-5/igt@[email protected]

* igt@gem_tiled_fence_blits@basic:
- bat-dg1-5: NOTRUN -> [SKIP][2] ([i915#4077]) +2 similar issues
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8144/bat-dg1-5/igt@[email protected]

* igt@gem_tiled_pread_basic:
- bat-dg1-5: NOTRUN -> [SKIP][3] ([i915#4079]) +1 similar issue
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8144/bat-dg1-5/igt@gem_tiled_pread_basic.html

* igt@i915_pm_backlight@basic-brightness:
- bat-dg1-5: NOTRUN -> [SKIP][4] ([i915#7561])
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8144/bat-dg1-5/igt@[email protected]

* igt@i915_pm_rps@basic-api:
- bat-dg1-5: NOTRUN -> [SKIP][5] ([i915#6621])
[5]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8144/bat-dg1-5/igt@[email protected]

* igt@i915_selftest@live@hangcheck:
- fi-hsw-4770: [PASS][6] -> [INCOMPLETE][7] ([i915#4785])
[6]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12420/fi-hsw-4770/igt@i915_selftest@[email protected]
[7]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8144/fi-hsw-4770/igt@i915_selftest@[email protected]

* igt@kms_addfb_basic@basic-x-tiled-legacy:
- bat-dg1-5: NOTRUN -> [SKIP][8] ([i915#4212]) +7 similar issues
[8]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8144/bat-dg1-5/igt@[email protected]

* igt@kms_addfb_basic@basic-y-tiled-legacy:
- bat-dg1-5: NOTRUN -> [SKIP][9] ([i915#4215])
[9]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8144/bat-dg1-5/igt@[email protected]

* igt@kms_chamelium@hdmi-hpd-fast:
- bat-dg1-5: NOTRUN -> [SKIP][10] ([fdo#111827]) +8 similar issues
[10]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8144/bat-dg1-5/igt@[email protected]

* igt@kms_cursor_legacy@basic-busy-flip-before-cursor:
- bat-dg1-5: NOTRUN -> [SKIP][11] ([i915#4103] / [i915#4213])
[11]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8144/bat-dg1-5/igt@[email protected]

* igt@kms_force_connector_basic@force-load-detect:
- bat-dg1-5: NOTRUN -> [SKIP][12] ([fdo#109285])
[12]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8144/bat-dg1-5/igt@[email protected]

* igt@kms_psr@sprite_plane_onoff:
- bat-dg1-5: NOTRUN -> [SKIP][13] ([i915#1072] / [i915#4078]) +3 similar issues
[13]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8144/bat-dg1-5/igt@kms_psr@sprite_plane_onoff.html

* igt@kms_setmode@basic-clone-single-crtc:
- bat-dg1-5: NOTRUN -> [SKIP][14] ([i915#3555])
[14]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8144/bat-dg1-5/igt@[email protected]

* igt@prime_vgem@basic-fence-read:
- bat-dg1-5: NOTRUN -> [SKIP][15] ([i915#3708]) +3 similar issues
[15]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8144/bat-dg1-5/igt@[email protected]

* igt@prime_vgem@basic-gtt:
- bat-dg1-5: NOTRUN -> [SKIP][16] ([i915#3708] / [i915#4077]) +1 similar issue
[16]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8144/bat-dg1-5/igt@[email protected]

* igt@prime_vgem@basic-userptr:
- bat-dg1-5: NOTRUN -> [SKIP][17] ([i915#3708] / [i915#4873])
[17]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8144/bat-dg1-5/igt@[email protected]

* igt@runner@aborted:
- fi-hsw-4770: NOTRUN -> [FAIL][18] ([fdo#109271] / [i915#4312] / [i915#5594])
[18]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8144/fi-hsw-4770/igt@[email protected]

#### Possible fixes ####

* igt@fbdev@read:
- {bat-rpls-2}: [SKIP][19] ([i915#2582]) -> [PASS][20] +4 similar issues
[19]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12420/bat-rpls-2/igt@[email protected]
[20]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8144/bat-rpls-2/igt@[email protected]

* igt@gem_exec_suspend@basic-s0@smem:
- {bat-rplp-1}: [DMESG-WARN][21] ([i915#2867]) -> [PASS][22]
[21]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12420/bat-rplp-1/igt@gem_exec_suspend@[email protected]
[22]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8144/bat-rplp-1/igt@gem_exec_suspend@[email protected]

* igt@i915_selftest@live@migrate:
- {bat-adlp-6}: [INCOMPLETE][23] ([i915#7308] / [i915#7348]) -> [PASS][24]
[23]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12420/bat-adlp-6/igt@i915_selftest@[email protected]
[24]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8144/bat-adlp-6/igt@i915_selftest@[email protected]

* igt@kms_cursor_legacy@basic-busy-flip-before-cursor@atomic-transitions-varying-size:
- fi-bsw-kefka: [FAIL][25] ([i915#6298]) -> [PASS][26]
[25]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12420/fi-bsw-kefka/igt@kms_cursor_legacy@basic-busy-flip-before-cursor@atomic-transitions-varying-size.html
[26]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8144/fi-bsw-kefka/igt@kms_cursor_legacy@basic-busy-flip-before-cursor@atomic-transitions-varying-size.html

{name}: This element is suppressed. This means it is ignored when computing
the status of the difference (SUCCESS, WARNING, or FAILURE).

[fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271
[fdo#109285]: https://bugs.freedesktop.org/show_bug.cgi?id=109285
[fdo#109295]: https://bugs.freedesktop.org/show_bug.cgi?id=109295
[fdo#111827]: https://bugs.freedesktop.org/show_bug.cgi?id=111827
[i915#1072]: https://gitlab.freedesktop.org/drm/intel/issues/1072
[i915#2190]: https://gitlab.freedesktop.org/drm/intel/issues/2190
[i915#2582]: https://gitlab.freedesktop.org/drm/intel/issues/2582
[i915#2867]: https://gitlab.freedesktop.org/drm/intel/issues/2867
[i915#3003]: https://gitlab.freedesktop.org/drm/intel/issues/3003
[i915#3301]: https://gitlab.freedesktop.org/drm/intel/issues/3301
[i915#3555]: https://gitlab.freedesktop.org/drm/intel/issues/3555
[i915#3708]: https://gitlab.freedesktop.org/drm/intel/issues/3708
[i915#4077]: https://gitlab.freedesktop.org/drm/intel/issues/4077
[i915#4078]: https://gitlab.freedesktop.org/drm/intel/issues/4078
[i915#4079]: https://gitlab.freedesktop.org/drm/intel/issues/4079
[i915#4083]: https://gitlab.freedesktop.org/drm/intel/issues/4083
[i915#4103]: https://gitlab.freedesktop.org/drm/intel/issues/4103
[i915#4212]: https://gitlab.freedesktop.org/drm/intel/issues/4212
[i915#4213]: https://gitlab.freedesktop.org/drm/intel/issues/4213
[i915#4215]: https://gitlab.freedesktop.org/drm/intel/issues/4215
[i915#4312]: https://gitlab.freedesktop.org/drm/intel/issues/4312
[i915#4613]: https://gitlab.freedesktop.org/drm/intel/issues/4613
[i915#4785]: https://gitlab.freedesktop.org/drm/intel/issues/4785
[i915#4873]: https://gitlab.freedesktop.org/drm/intel/issues/4873
[i915#4983]: https://gitlab.freedesktop.org/drm/intel/issues/4983
[i915#5594]: https://gitlab.freedesktop.org/drm/intel/issues/5594
[i915#6298]: https://gitlab.freedesktop.org/drm/intel/issues/6298
[i915#6434]: https://gitlab.freedesktop.org/drm/intel/issues/6434
[i915#6621]: https://gitlab.freedesktop.org/drm/intel/issues/6621
[i915#7308]: https://gitlab.freedesktop.org/drm/intel/issues/7308
[i915#7348]: https://gitlab.freedesktop.org/drm/intel/issues/7348
[i915#7456]: https://gitlab.freedesktop.org/drm/intel/issues/7456
[i915#7561]: https://gitlab.freedesktop.org/drm/intel/issues/7561

Build changes
-------------

* CI: CI-20190529 -> None
* IGT: IGT_7071 -> IGTPW_8144

CI-20190529: 20190529
CI_DRM_12420: 6e8acf83016689ea4cdfcbbdd994e5127a84e6ef @ git://anongit.freedesktop.org/gfx-ci/linux
IGTPW_8144: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8144/index.html
IGT_7071: 0801475083ccb938b1d3b358502ff97fdb435585 @ https://gitlab.freedesktop.org/drm/igt-gpu-tools.git

Testlist changes
----------------

+igt@device_reset@cold-reset-bound
+igt@device_reset@unbind-cold-reset-rebind
-igt@gem_shrink@shrink-vs-evict

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8144/index.html

#25 lore raw

[igt-dev] ✓ Fi.CI.BAT: success for Cold Reset IGT Test (rev2)

In reply to Anshuman Gupta
== Series Details ==

== Series Details ==

Series: Cold Reset IGT Test (rev2)
URL : https://patchwork.freedesktop.org/series/111245/
State : success

== Summary ==

CI Bug Log - changes from CI_DRM_12434 -> IGTPW_8151
====================================================

Summary
-------

**SUCCESS**

No regressions found.

External URL: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8151/index.html

Participating hosts (36 -> 39)
------------------------------

Additional (4): fi-bdw-gvtdvm fi-cfl-guc fi-tgl-dsi bat-dg1-6
Missing (1): fi-ctg-p8600

Known issues
------------

Here are the changes found in IGTPW_8151 that come from known issues:

### IGT changes ###

#### Issues hit ####

* igt@gem_lmem_swapping@verify-random:
- fi-cfl-guc: NOTRUN -> [SKIP][1] ([fdo#109271] / [i915#4613]) +3 similar issues
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8151/fi-cfl-guc/igt@[email protected]

* igt@gem_mmap@basic:
- bat-dg1-6: NOTRUN -> [SKIP][2] ([i915#4083])
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8151/bat-dg1-6/igt@[email protected]

* igt@gem_render_tiled_blits@basic:
- bat-dg1-6: NOTRUN -> [SKIP][3] ([i915#4079]) +1 similar issue
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8151/bat-dg1-6/igt@[email protected]

* igt@gem_tiled_fence_blits@basic:
- bat-dg1-6: NOTRUN -> [SKIP][4] ([i915#4077]) +2 similar issues
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8151/bat-dg1-6/igt@[email protected]

* igt@i915_pm_backlight@basic-brightness:
- bat-dg1-6: NOTRUN -> [SKIP][5] ([i915#7561])
[5]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8151/bat-dg1-6/igt@[email protected]

* igt@i915_pm_rps@basic-api:
- bat-dg1-6: NOTRUN -> [SKIP][6] ([i915#6621])
[6]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8151/bat-dg1-6/igt@[email protected]

* igt@i915_suspend@basic-s2idle-without-i915:
- fi-bdw-gvtdvm: NOTRUN -> [INCOMPLETE][7] ([i915#146])
[7]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8151/fi-bdw-gvtdvm/igt@[email protected]

* igt@i915_suspend@basic-s3-without-i915:
- fi-rkl-11600: [PASS][8] -> [FAIL][9] ([fdo#103375]) +1 similar issue
[8]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12434/fi-rkl-11600/igt@[email protected]
[9]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8151/fi-rkl-11600/igt@[email protected]

* igt@kms_addfb_basic@basic-y-tiled-legacy:
- bat-dg1-6: NOTRUN -> [SKIP][10] ([i915#4215])
[10]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8151/bat-dg1-6/igt@[email protected]

* igt@kms_addfb_basic@tile-pitch-mismatch:
- bat-dg1-6: NOTRUN -> [SKIP][11] ([i915#4212]) +7 similar issues
[11]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8151/bat-dg1-6/igt@[email protected]

* igt@kms_chamelium@common-hpd-after-suspend:
- bat-adlp-4: NOTRUN -> [SKIP][12] ([fdo#111827])
[12]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8151/bat-adlp-4/igt@[email protected]

* igt@kms_chamelium@dp-crc-fast:
- fi-cfl-guc: NOTRUN -> [SKIP][13] ([fdo#109271] / [fdo#111827]) +8 similar issues
[13]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8151/fi-cfl-guc/igt@[email protected]

* igt@kms_chamelium@hdmi-crc-fast:
- bat-dg1-6: NOTRUN -> [SKIP][14] ([fdo#111827]) +8 similar issues
[14]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8151/bat-dg1-6/igt@[email protected]

* igt@kms_chamelium@hdmi-hpd-fast:
- fi-bdw-gvtdvm: NOTRUN -> [SKIP][15] ([fdo#109271] / [fdo#111827]) +7 similar issues
[15]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8151/fi-bdw-gvtdvm/igt@[email protected]

* igt@kms_cursor_legacy@basic-busy-flip-before-cursor:
- bat-dg1-6: NOTRUN -> [SKIP][16] ([i915#4103] / [i915#4213])
[16]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8151/bat-dg1-6/igt@[email protected]

* igt@kms_flip@basic-plain-flip:
- fi-bdw-gvtdvm: NOTRUN -> [SKIP][17] ([fdo#109271]) +38 similar issues
[17]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8151/fi-bdw-gvtdvm/igt@[email protected]

* igt@kms_force_connector_basic@force-load-detect:
- bat-dg1-6: NOTRUN -> [SKIP][18] ([fdo#109285])
[18]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8151/bat-dg1-6/igt@[email protected]

* igt@kms_pipe_crc_basic@suspend-read-crc:
- bat-adlp-4: NOTRUN -> [SKIP][19] ([i915#3546])
[19]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8151/bat-adlp-4/igt@[email protected]

* igt@kms_psr@sprite_plane_onoff:
- bat-dg1-6: NOTRUN -> [SKIP][20] ([i915#1072] / [i915#4078]) +3 similar issues
[20]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8151/bat-dg1-6/igt@kms_psr@sprite_plane_onoff.html

* igt@kms_setmode@basic-clone-single-crtc:
- bat-dg1-6: NOTRUN -> [SKIP][21] ([i915#3555])
[21]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8151/bat-dg1-6/igt@[email protected]

* igt@prime_vgem@basic-gtt:
- bat-dg1-6: NOTRUN -> [SKIP][22] ([i915#3708] / [i915#4077]) +1 similar issue
[22]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8151/bat-dg1-6/igt@[email protected]

* igt@prime_vgem@basic-read:
- bat-dg1-6: NOTRUN -> [SKIP][23] ([i915#3708]) +3 similar issues
[23]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8151/bat-dg1-6/igt@[email protected]

* igt@prime_vgem@basic-userptr:
- fi-cfl-guc: NOTRUN -> [SKIP][24] ([fdo#109271]) +9 similar issues
[24]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8151/fi-cfl-guc/igt@[email protected]
- bat-dg1-6: NOTRUN -> [SKIP][25] ([i915#3708] / [i915#4873])
[25]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8151/bat-dg1-6/igt@[email protected]

#### Possible fixes ####

* igt@gem_exec_gttfill@basic:
- fi-pnv-d510: [FAIL][26] ([i915#7229]) -> [PASS][27]
[26]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12434/fi-pnv-d510/igt@[email protected]
[27]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8151/fi-pnv-d510/igt@[email protected]

* igt@gem_exec_suspend@basic-s0@smem:
- {bat-rplp-1}: [DMESG-WARN][28] ([i915#2867]) -> [PASS][29]
[28]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12434/bat-rplp-1/igt@gem_exec_suspend@[email protected]
[29]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8151/bat-rplp-1/igt@gem_exec_suspend@[email protected]
- {fi-ehl-2}: [DMESG-WARN][30] ([i915#5122]) -> [PASS][31]
[30]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12434/fi-ehl-2/igt@gem_exec_suspend@[email protected]
[31]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8151/fi-ehl-2/igt@gem_exec_suspend@[email protected]

* igt@i915_selftest@live@gt_pm:
- {bat-adln-1}: [DMESG-FAIL][32] ([i915#4258]) -> [PASS][33]
[32]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12434/bat-adln-1/igt@i915_selftest@live@gt_pm.html
[33]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8151/bat-adln-1/igt@i915_selftest@live@gt_pm.html

* igt@i915_selftest@live@migrate:
- bat-adlp-4: [INCOMPLETE][34] ([i915#7308] / [i915#7348]) -> [PASS][35]
[34]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12434/bat-adlp-4/igt@i915_selftest@[email protected]
[35]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8151/bat-adlp-4/igt@i915_selftest@[email protected]

* igt@i915_selftest@live@requests:
- {bat-rpls-1}: [INCOMPLETE][36] ([i915#4983] / [i915#6257]) -> [PASS][37]
[36]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12434/bat-rpls-1/igt@i915_selftest@[email protected]
[37]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8151/bat-rpls-1/igt@i915_selftest@[email protected]

* igt@kms_frontbuffer_tracking@basic:
- {bat-rpls-2}: [SKIP][38] ([i915#1849]) -> [PASS][39]
[38]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12434/bat-rpls-2/igt@[email protected]
[39]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8151/bat-rpls-2/igt@[email protected]

* igt@prime_vgem@basic-fence-flip:
- {bat-rpls-2}: [SKIP][40] ([fdo#109295] / [i915#1845] / [i915#3708]) -> [PASS][41]
[40]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12434/bat-rpls-2/igt@[email protected]
[41]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8151/bat-rpls-2/igt@[email protected]

{name}: This element is suppressed. This means it is ignored when computing
the status of the difference (SUCCESS, WARNING, or FAILURE).

[fdo#103375]: https://bugs.freedesktop.org/show_bug.cgi?id=103375
[fdo#109271]: https://bugs.freedesktop.org/show_bug.cgi?id=109271
[fdo#109284]: https://bugs.freedesktop.org/show_bug.cgi?id=109284
[fdo#109285]: https://bugs.freedesktop.org/show_bug.cgi?id=109285
[fdo#109295]: https://bugs.freedesktop.org/show_bug.cgi?id=109295
[fdo#110189]: https://bugs.freedesktop.org/show_bug.cgi?id=110189
[fdo#111827]: https://bugs.freedesktop.org/show_bug.cgi?id=111827
[i915#1072]: https://gitlab.freedesktop.org/drm/intel/issues/1072
[i915#146]: https://gitlab.freedesktop.org/drm/intel/issues/146
[i915#1845]: https://gitlab.freedesktop.org/drm/intel/issues/1845
[i915#1849]: https://gitlab.freedesktop.org/drm/intel/issues/1849
[i915#2190]: https://gitlab.freedesktop.org/drm/intel/issues/2190
[i915#2411]: https://gitlab.freedesktop.org/drm/intel/issues/2411
[i915#2867]: https://gitlab.freedesktop.org/drm/intel/issues/2867
[i915#3301]: https://gitlab.freedesktop.org/drm/intel/issues/3301
[i915#3546]: https://gitlab.freedesktop.org/drm/intel/issues/3546
[i915#3555]: https://gitlab.freedesktop.org/drm/intel/issues/3555
[i915#3708]: https://gitlab.freedesktop.org/drm/intel/issues/3708
[i915#4077]: https://gitlab.freedesktop.org/drm/intel/issues/4077
[i915#4078]: https://gitlab.freedesktop.org/drm/intel/issues/4078
[i915#4079]: https://gitlab.freedesktop.org/drm/intel/issues/4079
[i915#4083]: https://gitlab.freedesktop.org/drm/intel/issues/4083
[i915#4103]: https://gitlab.freedesktop.org/drm/intel/issues/4103
[i915#4212]: https://gitlab.freedesktop.org/drm/intel/issues/4212
[i915#4213]: https://gitlab.freedesktop.org/drm/intel/issues/4213
[i915#4215]: https://gitlab.freedesktop.org/drm/intel/issues/4215
[i915#4258]: https://gitlab.freedesktop.org/drm/intel/issues/4258
[i915#4312]: https://gitlab.freedesktop.org/drm/intel/issues/4312
[i915#4613]: https://gitlab.freedesktop.org/drm/intel/issues/4613
[i915#4873]: https://gitlab.freedesktop.org/drm/intel/issues/4873
[i915#4983]: https://gitlab.freedesktop.org/drm/intel/issues/4983
[i915#5122]: https://gitlab.freedesktop.org/drm/intel/issues/5122
[i915#6257]: https://gitlab.freedesktop.org/drm/intel/issues/6257
[i915#6367]: https://gitlab.freedesktop.org/drm/intel/issues/6367
[i915#6434]: https://gitlab.freedesktop.org/drm/intel/issues/6434
[i915#6621]: https://gitlab.freedesktop.org/drm/intel/issues/6621
[i915#6687]: https://gitlab.freedesktop.org/drm/intel/issues/6687
[i915#6856]: https://gitlab.freedesktop.org/drm/intel/issues/6856
[i915#7125]: https://gitlab.freedesktop.org/drm/intel/issues/7125
[i915#7229]: https://gitlab.freedesktop.org/drm/intel/issues/7229
[i915#7308]: https://gitlab.freedesktop.org/drm/intel/issues/7308
[i915#7346]: https://gitlab.freedesktop.org/drm/intel/issues/7346
[i915#7348]: https://gitlab.freedesktop.org/drm/intel/issues/7348
[i915#7456]: https://gitlab.freedesktop.org/drm/intel/issues/7456
[i915#7561]: https://gitlab.freedesktop.org/drm/intel/issues/7561

Build changes
-------------

* CI: CI-20190529 -> None
* IGT: IGT_7072 -> IGTPW_8151

CI-20190529: 20190529
CI_DRM_12434: 985931f189852e505af573997ddbf63bfbe2570b @ git://anongit.freedesktop.org/gfx-ci/linux
IGTPW_8151: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8151/index.html
IGT_7072: 69ba7163475925cdc69aebbdfa0e87453ae165c7 @ https://gitlab.freedesktop.org/drm/igt-gpu-tools.git

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8151/index.html

#26 lore raw

[igt-dev] ✓ Fi.CI.BAT: success for Cold Reset IGT Test (rev3)

In reply to Anshuman Gupta
== Series Details ==

== Series Details ==

Series: Cold Reset IGT Test (rev3)
URL : https://patchwork.freedesktop.org/series/111245/
State : success

== Summary ==

CI Bug Log - changes from CI_DRM_12437 -> IGTPW_8159
====================================================

Summary
-------

**SUCCESS**

No regressions found.

External URL: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8159/index.html

Participating hosts (30 -> 30)
------------------------------

Additional (1): bat-dg1-6
Missing (1): fi-tgl-dsi

Known issues
------------

Here are the changes found in IGTPW_8159 that come from known issues:

### IGT changes ###

#### Issues hit ####

* igt@gem_mmap@basic:
- bat-dg1-6: NOTRUN -> [SKIP][1] ([i915#4083])
[1]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8159/bat-dg1-6/igt@[email protected]

* igt@gem_render_tiled_blits@basic:
- bat-dg1-6: NOTRUN -> [SKIP][2] ([i915#4079]) +1 similar issue
[2]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8159/bat-dg1-6/igt@[email protected]

* igt@gem_tiled_fence_blits@basic:
- bat-dg1-6: NOTRUN -> [SKIP][3] ([i915#4077]) +2 similar issues
[3]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8159/bat-dg1-6/igt@[email protected]

* igt@i915_pm_backlight@basic-brightness:
- bat-dg1-6: NOTRUN -> [SKIP][4] ([i915#7561])
[4]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8159/bat-dg1-6/igt@[email protected]

* igt@i915_pm_rps@basic-api:
- bat-dg1-6: NOTRUN -> [SKIP][5] ([i915#6621])
[5]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8159/bat-dg1-6/igt@[email protected]

* igt@kms_addfb_basic@basic-y-tiled-legacy:
- bat-dg1-6: NOTRUN -> [SKIP][6] ([i915#4215])
[6]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8159/bat-dg1-6/igt@[email protected]

* igt@kms_addfb_basic@tile-pitch-mismatch:
- bat-dg1-6: NOTRUN -> [SKIP][7] ([i915#4212]) +7 similar issues
[7]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8159/bat-dg1-6/igt@[email protected]

* igt@kms_chamelium@hdmi-crc-fast:
- bat-dg1-6: NOTRUN -> [SKIP][8] ([fdo#111827]) +8 similar issues
[8]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8159/bat-dg1-6/igt@[email protected]

* igt@kms_cursor_legacy@basic-busy-flip-before-cursor:
- bat-dg1-6: NOTRUN -> [SKIP][9] ([i915#4103] / [i915#4213])
[9]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8159/bat-dg1-6/igt@[email protected]

* igt@kms_force_connector_basic@force-load-detect:
- bat-dg1-6: NOTRUN -> [SKIP][10] ([fdo#109285])
[10]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8159/bat-dg1-6/igt@[email protected]

* igt@kms_pipe_crc_basic@suspend-read-crc@pipe-b-hdmi-a-2:
- fi-icl-u2: [PASS][11] -> [DMESG-WARN][12] ([i915#2867])
[11]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12437/fi-icl-u2/igt@kms_pipe_crc_basic@[email protected]
[12]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8159/fi-icl-u2/igt@kms_pipe_crc_basic@[email protected]

* igt@kms_psr@sprite_plane_onoff:
- bat-dg1-6: NOTRUN -> [SKIP][13] ([i915#1072] / [i915#4078]) +3 similar issues
[13]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8159/bat-dg1-6/igt@kms_psr@sprite_plane_onoff.html

* igt@kms_setmode@basic-clone-single-crtc:
- bat-dg1-6: NOTRUN -> [SKIP][14] ([i915#3555])
[14]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8159/bat-dg1-6/igt@[email protected]

* igt@prime_vgem@basic-gtt:
- bat-dg1-6: NOTRUN -> [SKIP][15] ([i915#3708] / [i915#4077]) +1 similar issue
[15]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8159/bat-dg1-6/igt@[email protected]

* igt@prime_vgem@basic-read:
- bat-dg1-6: NOTRUN -> [SKIP][16] ([i915#3708]) +3 similar issues
[16]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8159/bat-dg1-6/igt@[email protected]

* igt@prime_vgem@basic-userptr:
- bat-dg1-6: NOTRUN -> [SKIP][17] ([i915#3708] / [i915#4873])
[17]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8159/bat-dg1-6/igt@[email protected]

* igt@runner@aborted:
- fi-rkl-11600: NOTRUN -> [FAIL][18] ([i915#4312])
[18]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8159/fi-rkl-11600/igt@[email protected]

#### Possible fixes ####

* igt@i915_selftest@live@gt_heartbeat:
- fi-apl-guc: [DMESG-FAIL][19] ([i915#5334]) -> [PASS][20]
[19]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12437/fi-apl-guc/igt@i915_selftest@live@gt_heartbeat.html
[20]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8159/fi-apl-guc/igt@i915_selftest@live@gt_heartbeat.html

* igt@i915_selftest@live@hugepages:
- {bat-rpls-2}: [DMESG-WARN][21] ([i915#5278]) -> [PASS][22]
[21]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12437/bat-rpls-2/igt@i915_selftest@[email protected]
[22]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8159/bat-rpls-2/igt@i915_selftest@[email protected]

* igt@i915_selftest@live@migrate:
- {bat-adlp-6}: [INCOMPLETE][23] ([i915#7348]) -> [PASS][24]
[23]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12437/bat-adlp-6/igt@i915_selftest@[email protected]
[24]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8159/bat-adlp-6/igt@i915_selftest@[email protected]

* igt@kms_cursor_legacy@basic-busy-flip-before-cursor@atomic-transitions-varying-size:
- fi-bsw-kefka: [FAIL][25] ([i915#6298]) -> [PASS][26]
[25]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12437/fi-bsw-kefka/igt@kms_cursor_legacy@basic-busy-flip-before-cursor@atomic-transitions-varying-size.html
[26]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8159/fi-bsw-kefka/igt@kms_cursor_legacy@basic-busy-flip-before-cursor@atomic-transitions-varying-size.html

* igt@kms_pipe_crc_basic@nonblocking-crc@pipe-d-dp-2:
- {bat-dg2-11}: [FAIL][27] ([i915#7336]) -> [PASS][28]
[27]: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_12437/bat-dg2-11/igt@kms_pipe_crc_basic@[email protected]
[28]: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8159/bat-dg2-11/igt@kms_pipe_crc_basic@[email protected]

{name}: This element is suppressed. This means it is ignored when computing
the status of the difference (SUCCESS, WARNING, or FAILURE).

[fdo#109285]: https://bugs.freedesktop.org/show_bug.cgi?id=109285
[fdo#111827]: https://bugs.freedesktop.org/show_bug.cgi?id=111827
[i915#1072]: https://gitlab.freedesktop.org/drm/intel/issues/1072
[i915#2582]: https://gitlab.freedesktop.org/drm/intel/issues/2582
[i915#2867]: https://gitlab.freedesktop.org/drm/intel/issues/2867
[i915#3555]: https://gitlab.freedesktop.org/drm/intel/issues/3555
[i915#3708]: https://gitlab.freedesktop.org/drm/intel/issues/3708
[i915#4077]: https://gitlab.freedesktop.org/drm/intel/issues/4077
[i915#4078]: https://gitlab.freedesktop.org/drm/intel/issues/4078
[i915#4079]: https://gitlab.freedesktop.org/drm/intel/issues/4079
[i915#4083]: https://gitlab.freedesktop.org/drm/intel/issues/4083
[i915#4103]: https://gitlab.freedesktop.org/drm/intel/issues/4103
[i915#4212]: https://gitlab.freedesktop.org/drm/intel/issues/4212
[i915#4213]: https://gitlab.freedesktop.org/drm/intel/issues/4213
[i915#4215]: https://gitlab.freedesktop.org/drm/intel/issues/4215
[i915#4312]: https://gitlab.freedesktop.org/drm/intel/issues/4312
[i915#4873]: https://gitlab.freedesktop.org/drm/intel/issues/4873
[i915#5278]: https://gitlab.freedesktop.org/drm/intel/issues/5278
[i915#5334]: https://gitlab.freedesktop.org/drm/intel/issues/5334
[i915#6257]: https://gitlab.freedesktop.org/drm/intel/issues/6257
[i915#6298]: https://gitlab.freedesktop.org/drm/intel/issues/6298
[i915#6621]: https://gitlab.freedesktop.org/drm/intel/issues/6621
[i915#6997]: https://gitlab.freedesktop.org/drm/intel/issues/6997
[i915#7336]: https://gitlab.freedesktop.org/drm/intel/issues/7336
[i915#7348]: https://gitlab.freedesktop.org/drm/intel/issues/7348
[i915#7359]: https://gitlab.freedesktop.org/drm/intel/issues/7359
[i915#7561]: https://gitlab.freedesktop.org/drm/intel/issues/7561

Build changes
-------------

* CI: CI-20190529 -> None
* IGT: IGT_7072 -> IGTPW_8159

CI-20190529: 20190529
CI_DRM_12437: a25c2a69c2f1c9f8e8bc07df1b7185c8749692f3 @ git://anongit.freedesktop.org/gfx-ci/linux
IGTPW_8159: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8159/index.html
IGT_7072: 69ba7163475925cdc69aebbdfa0e87453ae165c7 @ https://gitlab.freedesktop.org/drm/igt-gpu-tools.git

Testlist changes
----------------

+igt@device_reset@cold-reset-bound
+igt@device_reset@unbind-cold-reset-rebind

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_8159/index.html