tpm: Get TCG log from TPM2 ACPI table for tpm2 systems
Subsystems (2)
PATCH v3 1/1 tpm: Get TCG log from TPM2 ACPI table for tpm2 systems
From: Jordan Hand <[email protected]>
For TPM2-based systems, retrieve the TCG log from the TPM2 ACPI table. The TPM2 ACPI table is defined in section 7.3 of the TCG ACPI Specification (see link).
The TPM2 table is used primarily by legacy BIOS in place of the TCPA table when the system's TPM is version 2.0 to denote (among other metadata) the location of the crypto-agile TCG log. In particluar, the SeaBios firmware used by default by QEMU makes use of this table for crypto-agile logs.
---
Same as v2 with more descriptive commit message
drivers/char/tpm/eventlog/acpi.c | 67 +++++++++++++++++++++++--------- 1 file changed, 48 insertions(+), 19 deletions(-)
drivers/char/tpm/eventlog/acpi.c +48 -19
@@ -41,17 +41,31 @@ struct acpi_tcpa { }; }; +struct acpi_tpm2 { +struct acpi_table_header hdr; +u16 platform_class; +u16 reserved; +u64 control_area_addr; +u32 start_method; +u8 start_method_params[12 ]; +u32 log_max_len; +u64 log_start_addr; +} __packed; +/* read binary bios log */ int tpm_read_log_acpi (struct tpm_chip *chip) { -struct acpi_tcpa *buff; +struct acpi_table_header *buff; +struct acpi_tcpa *tcpa; +struct acpi_tpm2 *tpm2; +acpi_status status;void __iomem *virt;u64 len, start; +int log_type;struct tpm_bios_log *log; - -if (chip->flags &TPM_CHIP_FLAG_TPM2 ) -return -ENODEV ; +bool is_tpm2 = chip->flags &TPM_CHIP_FLAG_TPM2 ; +acpi_string table_sig; log = &chip->log;
@@ -61,26 +75,41 @@ int tpm_read_log_acpi(struct tpm_chip *chip)if (!chip->acpi_dev_handle)return -ENODEV ; -/* Find TCPA entry in RSDT (ACPI_LOGICAL_ADDRESSING) */ - status =acpi_get_table (ACPI_SIG_TCPA ,1 , - (struct acpi_table_header **)&buff); +/* Find TCPA or TPM2 entry in RSDT (ACPI_LOGICAL_ADDRESSING) */ + table_sig = is_tpm2 ?ACPI_SIG_TPM2 :ACPI_SIG_TCPA ; + status =acpi_get_table (table_sig,1 , &buff);if (ACPI_FAILURE (status))return -ENODEV ; -switch (buff->platform_class) { -case BIOS_SERVER : - len = buff->server.log_max_len; - start = buff->server.log_start_addr; -break ; -case BIOS_CLIENT : -default : - len = buff->client.log_max_len; - start = buff->client.log_start_addr; -break ; +/* If log_max_len and log_start_addr are set, start_method_params will +* be 12 bytes, according to TCG ACPI spec. If start_method_params is +* fewer than 12 bytes, the TCG log is not available +*/ +if (is_tpm2 && (buff->length ==sizeof (struct acpi_tpm2 ))) { + tpm2 = (struct acpi_tpm2 *)buff; + len = tpm2->log_max_len; + start = tpm2->log_start_addr; + log_type =EFI_TCG2_EVENT_LOG_FORMAT_TCG_2 ; + }else { + tcpa = (struct acpi_tcpa *)buff; +switch (tcpa->platform_class) { +case BIOS_SERVER : + len = tcpa->server.log_max_len; + start = tcpa->server.log_start_addr; +break ; +case BIOS_CLIENT : +default : + len = tcpa->client.log_max_len; + start = tcpa->client.log_start_addr; +break ; + } + log_type =EFI_TCG2_EVENT_LOG_FORMAT_TCG_1_2 ; } +if (!len) { -dev_warn (&chip->dev,"%s: TCPA log area empty\n" , __func__); +dev_warn (&chip->dev,"%s: %s log area empty\n" , + table_sig, __func__);return -EIO ; }
@@ -98,7 +127,7 @@ int tpm_read_log_acpi(struct tpm_chip *chip)memcpy_fromio (log->bios_event_log, virt, len);acpi_os_unmap_iomem (virt, len); -return EFI_TCG2_EVENT_LOG_FORMAT_TCG_1_2 ; +return log_type; err:kfree (log->bios_event_log);
Signature · 1 line
2.17.1
Quoted 5 lines · Jordan Hand
From: Jordan Hand <[email protected]>
For TPM2-based systems, retrieve the TCG log from the TPM2 ACPI table. The TPM2 ACPI table is defined in section 7.3 of the TCG ACPI Specification (see link).
You are claiming here that this applies to all systems I've never used even a single one that uses it. How can you possibly back this up? I've been aware that SeaBIOS does use it but only now became aware that it has been also updated to the standard. This kind of change is welcome but lets scope things properly.
Unfortunately, also the short summary looks like pure nonsense at the moment. What are "TCG log", "tpm2 systems" and why is TPM2 not capitalized there?
For short summary I'd just put "tpm: Parse event log from TPM2 table"
Quoted 2 lines
The TPM2 table is used primarily by legacy BIOS in place of the TCPA table when the system's TPM is version 2.0 to denote (among other metadata) the
"for TPM2 systems"
Stick with a single notation. If count correctly you use in total three different notations for the same thing in the commit message.
Quoted 2 lines
location of the crypto-agile TCG log. In particluar, the SeaBios firmware used by default by QEMU makes use of this table for crypto-agile logs.
crypto-agile log should be enough given the context.
Quoted 2 lines
Link:
https://trustedcomputinggroup.org/wp-content/uploads/TCG_ACPIGeneralSpecification_v1.20_r8.pdf
Should be in the same line. You should also separate them with a single space character, not with a new line character.
This is a more sane URL for the resource to use:
https://trustedcomputinggroup.org/resource/tcg-acpi-specification/
Quoted 1 line
Remove this extra new line character.
Quoted 17 lines
Signed-off-by Jordan Hand <[email protected]>---
Same as v2 with more descriptive commit message
drivers/char/tpm/eventlog/acpi.c | 67 +++++++++++++++++++++++--------- 1 file changed, 48 insertions(+), 19 deletions(-)drivers/char/tpm/eventlog/acpi.c +0
-0@@ -41,17 +41,31 @@ struct acpi_tcpa { }; };
drivers/char/tpm/eventlog/acpi.c struct acpi_tcpa { · line 53
Quoted 10 lines
drivers/char/tpm/eventlog/acpi.c +10
-0+struct acpi_tpm2 { +struct acpi_table_header hdr; +u16 platform_class; +u16 reserved; +u64 control_area_addr; +u32 start_method; +u8 start_method_params[12 ]; +u32 log_max_len; +u64 log_start_addr; +} __packed;
This is a duplicate definition to struct acpi_table_tpm2 located in include/acpi/actbl3.h. If you need to update that file, please do it as a separate commit.
Other examples of use can be found from tpm_crb.c and tpm_tis.c. Please skim them through.
drivers/char/tpm/eventlog/acpi.c struct acpi_tcpa { · line 61
Quoted 9 lines
drivers/char/tpm/eventlog/acpi.c +5
-1+/* read binary bios log */ int tpm_read_log_acpi (struct tpm_chip *chip) { -struct acpi_tcpa *buff; +struct acpi_table_header *buff; +struct acpi_tcpa *tcpa; +struct acpi_tpm2 *tpm2; +
A trailing new line.
Quoted 31 lines
drivers/char/tpm/eventlog/acpi.c +6
-10acpi_status status;void __iomem *virt;u64 len, start; +int log_type;struct tpm_bios_log *log; - -if (chip->flags &TPM_CHIP_FLAG_TPM2 ) -return -ENODEV ; +bool is_tpm2 = chip->flags &TPM_CHIP_FLAG_TPM2 ; +acpi_string table_sig; log = &chip->log;@@ -61,26 +75,41 @@ int tpm_read_log_acpi(struct tpm_chip *chip)if (!chip->acpi_dev_handle)return -ENODEV ; -/* Find TCPA entry in RSDT (ACPI_LOGICAL_ADDRESSING) */ - status =acpi_get_table (ACPI_SIG_TCPA ,1 , - (struct acpi_table_header **)&buff); +/* Find TCPA or TPM2 entry in RSDT (ACPI_LOGICAL_ADDRESSING) */ + table_sig = is_tpm2 ?ACPI_SIG_TPM2 :ACPI_SIG_TCPA ; + status =acpi_get_table (table_sig,1 , &buff);if (ACPI_FAILURE (status))return -ENODEV ; -switch (buff->platform_class) { -case BIOS_SERVER : - len = buff->server.log_max_len; - start = buff->server.log_start_addr;
drivers/char/tpm/eventlog/acpi.c int tpm_read_log_acpi(struct tpm_chip *chip) · line 88
Quoted 10 lines
drivers/char/tpm/eventlog/acpi.c +4
-6-break ; -case BIOS_CLIENT : -default : - len = buff->client.log_max_len; - start = buff->client.log_start_addr; -break ; +/* If log_max_len and log_start_addr are set, start_method_params will +* be 12 bytes, according to TCG ACPI spec. If start_method_params is +* fewer than 12 bytes, the TCG log is not available +*/
What is start_method_params? I don't understand this comment. Please remove and instead implement validation to all branches.
drivers/char/tpm/eventlog/acpi.c int tpm_read_log_acpi(struct tpm_chip *chip) · line 94
Quoted 6 lines
drivers/char/tpm/eventlog/acpi.c +6
-0+if (is_tpm2 && (buff->length ==sizeof (struct acpi_tpm2 ))) { + tpm2 = (struct acpi_tpm2 *)buff; + len = tpm2->log_max_len; + start = tpm2->log_start_addr; + log_type =EFI_TCG2_EVENT_LOG_FORMAT_TCG_2 ; + }else {
Instead "else if (buff->length == sizeof(struct acpi_tcpa)" and return -EINVAL if neither matches.
Logically that is a distinct change so you need to turn this into a patch set where the first patch contains only the change that validates that the length for TCPA and return -EINVAL if not.
drivers/char/tpm/eventlog/acpi.c int tpm_read_log_acpi(struct tpm_chip *chip) · line 95
Quoted 1 line
drivers/char/tpm/eventlog/acpi.c +1
-0+ tcpa = (struct acpi_tcpa *)buff;
Did not look everything in the detail because there is still so much groundwork to do but this will branch to use TCPA table with a TPM2 chip when the length differs from sizeof(struct acpi_tpm2).
/Jarkko