nvme-cli : attaching a namespace to an undiscovered nvme controller on multi-controller nvme disk
Hi,
I have got an NVMe disk with multi-controller support. This disk has two controllers however kernel could only discover one of the controllers. On this disk if we create a namespace and attach it to a controller (which is not discovered by the kernel) then that namespace can't used for IO. In fact, there's no path to reach such a namespace from kernel.
Please find the details below:
# lspci 0018:01:00.0 Non-Volatile memory controller: Samsung Electronics Co Ltd NVMe SSD Controller PM173X
# nvme list -v Subsystem Subsystem-NQN Controllers ---------------- ------------------------------------------------------------------------------------------------ ---------------- nvme-subsys0 nqn.1994-11.com.samsung:nvme:PM1735:2.5-inch:S6EUNA0R500358 nvme0
Device SN MN FR TxPort Asdress Slot Subsystem Namespaces
-------- -------------------- ---------------------------------------- -------- ------ -------------- ------ ------------ ----------------
nvme0 S6EUNA0R500358 1.6TB NVMe Gen4 U.2 SSD REV.SN49 pcie 0018:01:00.0 nvme-subsys0
Device Generic NSID Usage Format Controllers
------------ ------------ ---------- -------------------------- ---------------- ----------------
# nvme id-ctrl /dev/nvme0 -H NVME Identify Controller: vid : 0x144d ssvid : 0x1014 sn : S6EUNA0R500358 mn : 1.6TB NVMe Gen4 U.2 SSD fr : REV.SN49 rab : 8 ieee : 002538 cmic : 0x3 [3:3] : 0 ANA not supported [2:2] : 0 PCI [1:1] : 0x1 Multi Controller <== this is multi-controller disk [0:0] : 0x1 Multi Port <snip> <snip>
# nvme list-ctrl /dev/nvme0 num of ctrls present: 2 [ 0]:0x41 [ 1]:0x42
# cat /sys/class/nvme/nvme0/cntlid 65
So it's apparent from the above output that kernel has discovered one controller (nvme0) with cntlid 65(0x41). The other controller with cntlid 0x42 remain undiscovered. Please note even though kernel couldn't discover both disk controllers, it's possible to create and attach namespace to a controller which is not discovered by the kernel.
# nvme create-ns /dev/nvme0 --nsze=0x1749A956 --ncap=0x1749A956 --block-size=4096 create-ns: Success, created nsid:1
Now, attach namespace to a controller which is not discovered/known by the kernel.
# nvme attach-ns /dev/nvme0 -c 0x42 -n 1 attach-ns: Success, nsid:1
# nvme list Node Generic SN Model Namespace Usage Format FW Rev --------------------- --------------------- -------------------- ---------------------------------------- ---------- -------------------------- ---------------- --------
The nvme list doesn't show any namespace and the reason being the namespace is attached to a controller which is not discovered by the kernel. The kernel doesn't have any path to access this namespace. So in essence now this namespace can't be used for any IO.
Looking at the above output (namespace list is empty) if we try creating a new namespace then we see the below error.
# nvme create-ns /dev/nvme0 --nsze=0x1749A956 --ncap=0x1749A956 --block-size=4096 NVMe status: Namespace Insufficient Capacity: Creating the namespace requires more free space than is currently available(0x2115)
# nvme id-ctrl /dev/nvme0 -H NVME Identify Controller: vid : 0x144d ssvid : 0x1014 sn : S6EUNA0R500358 mn : 1.6TB NVMe Gen4 U.2 SSD <snip> <snip> tnvmcap : 1600321314816 [127:0] : 1600321314816 Total NVM Capacity (TNVMCAP)
unvmcap : 0
[127:0] : 0
Unallocated NVM Capacity (UNVMCAP)
<snip>
<snip>
We find from the above output that all available capacity of disk has been used but nvme list output is empty.
Please note that "kernel is unable to discover both NVMe controllers" is not a kernel bug. Also I think, this is not a bug with NVMe disk or its firmware. This multi controller NVMe disk has a "DualPortEn#" pin and by default, the disk is configured to operate a single x4 port. Asserting the "DualPortEn#" pin enables the Dual x2 port mode. When disk operates in Dual x2 mode, kernel could discover both controllers. However when "DualportEn#" pin is not asserted disk would only enable one of the controllers and hence kernel could discover one controller.
There could be multiple ways to address this issue. However my proposal would be to address it in nvme-cli. As nvme-cli builds the nvme topology it shall be easy for nvme-cli to detect this anomaly when a namespace is being attached to undiscovered nvme controller and shows some WARNING message. The WARNING could be shown for ~10 seconds so that it gives enough time to a user to cancel this operation. If the operation is not cancelled then nvme-cli would proceed as usual.
Please help review and as usual, comments/feedback/suggestions are most welcome!
Thanks,
--Nilay
Quoted 3 lines · Nilay Shroff
There could be multiple ways to address this issue. However my proposal would be to address it in nvme-cli. As nvme-cli builds the nvme topology it shall be easy
for nvme-cli to detect
The topology scan in libnvme is only using the information available in sysfs. libnvme doesn't issue any commands anymore and I'd like to keep it this in this way. So if the kernel doesn't exposes this information to userspace via sysfs, I don't think it's simple to 'fix' this in nvme-cli/libnvme.
Quoted 11 lines · Daniel Wagner
Quoted 3 lines · Nilay Shroff
There could be multiple ways to address this issue. However my proposal would be to address it in nvme-cli. As nvme-cli builds the nvme topology it shall be easy
for nvme-cli to detectThe topology scan in libnvme is only using the information available in sysfs. libnvme doesn't issue any commands anymore and I'd like to keep it this in this way. So if the kernel doesn't exposes this information to userspace via sysfs, I don't think it's simple to 'fix' this in nvme-cli/libnvme.
I think the information which we need to contain this issue is already available through sysfs. If we scan nvme topology then we could find the controller id assigned to each controller under each nvme subsystem. We can then leverage this information to figure out whether each controller id specified in the attach-ns command is valid or not. So essentially we match controller id specified in attach-ns command against the controller id learnt through scanning the topology. If we find that any discrepancy then we can show the WARNING to the user. I have worked out a patch using this method. I have attached the patch below for suggestion/feedback.
nvme.c +75 -2
@@ -2784,6 +2784,23 @@ static int delete_ns(int argc, char **argv, struct command *cmd, struct plugin *return err; } +static bool nvme_match_subsys_device_filter (nvme_subsystem_t s,nvme_ctrl_t c, +nvme_ns_t ns,void *f_arg) +{ +nvme_ctrl_t _c; +const char *devname = (const char *)f_arg; + +if (s) { +nvme_subsystem_for_each_ctrl (s, _c) { +if (!strcmp (devname,nvme_ctrl_get_name (_c))) +return true; + } +return false; + } + +return true; +} +static int nvme_attach_ns (int argc,char **argv,int attach,const char *desc,struct command *cmd) { _cleanup_free_ struct nvme_ctrl_list *cntlist = NULL;
@@ -2839,12 +2856,68 @@ static int nvme_attach_ns(int argc, char **argv, int attach, const char *desc, snvme_init_ctrl_list (cntlist, num, ctrlist); -if (attach) +if (attach) { +const char *cntlid; +int __cntlid; +char *p; +nvme_host_t h; +nvme_subsystem_t s; +nvme_ctrl_t c; +nvme_root_t r =NULL ; +int matched =0 ; +nvme_scan_filter_t filter = nvme_match_subsys_device_filter; + + r =nvme_create_root (stderr, log_level); +if (!r) { +nvme_show_error ("Failed to create topology root: %s" , +nvme_strerror (errno)); +return -errno; + } + + err =nvme_scan_topology (r, filter, (void *)dev->name); +if (err <0 ) { +if (errno !=ENOENT ) +nvme_show_error ("Failed to scan topology: %s" , +nvme_strerror (errno)); +nvme_free_tree (r); +return err; + } +nvme_for_each_host (r, h) { +nvme_for_each_subsystem (h, s) { +nvme_subsystem_for_each_ctrl (s, c) { + cntlid =nvme_ctrl_get_cntlid (c); + errno =0 ; + __cntlid =strtoul (cntlid, &p,0 ); +if (errno || *p !=0 ) +continue ; +for (i =0 ; i < num; i++) { +if (__cntlid == list[i]) + matched++; + } + } + } + } + +nvme_free_tree (r); + +if (matched != num) { +fprintf (stderr, +"You are about to attach namespace 0x%x to an undiscovered nvme controller.\n" , + cfg.namespace_id); +fprintf (stderr, +"WARNING: Attaching nampespace to undiscovered nvme controller may have undesired side effect!\n" +"You may not be able to perform any IO to such namespace.\n" +"You have 10 seconds to press Ctrl-C to cancel this operation.\n\n" ); +sleep (10 ); +fprintf (stderr,"Sending attach-ns operation ...\n" ); + } + err =nvme_cli_ns_attach_ctrls (dev, cfg.namespace_id, cntlist); -else + }else { err =nvme_cli_ns_detach_ctrls (dev, cfg.namespace_id, cntlist); + }if (!err)printf ("%s: Success, nsid:%d\n" , cmd->name, cfg.namespace_id);
Thanks,
--Nilay
Quoted 114 lines · Nilay Shroff
Quoted 11 lines · Daniel Wagner
Quoted 3 lines · Nilay Shroff
There could be multiple ways to address this issue. However my proposal would be to address it in nvme-cli. As nvme-cli builds the nvme topology it shall be easy
for nvme-cli to detectThe topology scan in libnvme is only using the information available in sysfs. libnvme doesn't issue any commands anymore and I'd like to keep it this in this way. So if the kernel doesn't exposes this information to userspace via sysfs, I don't think it's simple to 'fix' this in nvme-cli/libnvme.
I think the information which we need to contain this issue is already available through sysfs. If we scan nvme topology then we could find the controller id assigned to each controller under each nvme subsystem. We can then leverage this information to figure out whether each controller id specified in the attach-ns command is valid or not. So essentially we match controller id specified in attach-ns command against the controller id learnt through scanning the topology. If we find that any discrepancy then we can show the WARNING to the user. I have worked out a patch using this method. I have attached the patch below for suggestion/feedback.
nvme.c +73
-1@@ -2784,6 +2784,23 @@ static int delete_ns(int argc, char **argv, struct command *cmd, struct plugin *return err; } +static bool nvme_match_subsys_device_filter (nvme_subsystem_t s,nvme_ctrl_t c, +nvme_ns_t ns,void *f_arg) +{ +nvme_ctrl_t _c; +const char *devname = (const char *)f_arg; + +if (s) { +nvme_subsystem_for_each_ctrl (s, _c) { +if (!strcmp (devname,nvme_ctrl_get_name (_c))) +return true; + } +return false; + } + +return true; +} +static int nvme_attach_ns (int argc,char **argv,int attach,const char *desc,struct command *cmd) { _cleanup_free_ struct nvme_ctrl_list *cntlist = NULL;@@ -2839,12 +2856,68 @@ static int nvme_attach_ns(int argc, char **argv, int attach, const char *desc, snvme_init_ctrl_list (cntlist, num, ctrlist); -if (attach) +if (attach) { +const char *cntlid; +int __cntlid; +char *p; +nvme_host_t h; +nvme_subsystem_t s; +nvme_ctrl_t c; +nvme_root_t r =NULL ; +int matched =0 ; +nvme_scan_filter_t filter = nvme_match_subsys_device_filter; + + r =nvme_create_root (stderr, log_level); +if (!r) { +nvme_show_error ("Failed to create topology root: %s" , +nvme_strerror (errno)); +return -errno; + } + + err =nvme_scan_topology (r, filter, (void *)dev->name); +if (err <0 ) { +if (errno !=ENOENT ) +nvme_show_error ("Failed to scan topology: %s" , +nvme_strerror (errno)); +nvme_free_tree (r); +return err; + } +nvme_for_each_host (r, h) { +nvme_for_each_subsystem (h, s) { +nvme_subsystem_for_each_ctrl (s, c) { + cntlid =nvme_ctrl_get_cntlid (c); + errno =0 ; + __cntlid =strtoul (cntlid, &p,0 ); +if (errno || *p !=0 ) +continue ; +for (i =0 ; i < num; i++) { +if (__cntlid == list[i]) + matched++; + } + } + } + } + +nvme_free_tree (r); + +if (matched != num) { +fprintf (stderr, +"You are about to attach namespace 0x%x to an undiscovered nvme controller.\n" , + cfg.namespace_id); +fprintf (stderr, +"WARNING: Attaching nampespace to undiscovered nvme controller may have undesired side effect!\n" +"You may not be able to perform any IO to such namespace.\n" +"You have 10 seconds to press Ctrl-C to cancel this operation.\n\n" ); +sleep (10 ); +fprintf (stderr,"Sending attach-ns operation ...\n" ); + } +
nvme.c static int nvme_attach_ns(int argc, char **argv, int attach, const char *desc, s · line 2923
Quoted 10 lines
nvme.c +2
-1err =nvme_cli_ns_attach_ctrls (dev, cfg.namespace_id, cntlist); - else + }else { err =nvme_cli_ns_detach_ctrls (dev, cfg.namespace_id, cntlist); + }if (!err)printf ("%s: Success, nsid:%d\n" , cmd->name, cfg.namespace_id);
Gentle ping...
If there's no objection to the above proposed patch then may I send a formal patch?
Thanks,
--Nilay
Quoted 124 lines · Nilay Shroff
Quoted 121 lines · Nilay Shroff
Quoted 11 lines · Daniel Wagner
Quoted 3 lines · Nilay Shroff
There could be multiple ways to address this issue. However my proposal would be to address it in nvme-cli. As nvme-cli builds the nvme topology it shall be easy
for nvme-cli to detectThe topology scan in libnvme is only using the information available in sysfs. libnvme doesn't issue any commands anymore and I'd like to keep it this in this way. So if the kernel doesn't exposes this information to userspace via sysfs, I don't think it's simple to 'fix' this in nvme-cli/libnvme.
I think the information which we need to contain this issue is already available through sysfs. If we scan nvme topology then we could find the controller id assigned to each controller under each nvme subsystem. We can then leverage this information to figure out whether each controller id specified in the attach-ns command is valid or not. So essentially we match controller id specified in attach-ns command against the controller id learnt through scanning the topology. If we find that any discrepancy then we can show the WARNING to the user. I have worked out a patch using this method. I have attached the patch below for suggestion/feedback.
nvme.c +75
-2@@ -2784,6 +2784,23 @@ static int delete_ns(int argc, char **argv, struct command *cmd, struct plugin *return err; } +static bool nvme_match_subsys_device_filter (nvme_subsystem_t s,nvme_ctrl_t c, +nvme_ns_t ns,void *f_arg) +{ +nvme_ctrl_t _c; +const char *devname = (const char *)f_arg; + +if (s) { +nvme_subsystem_for_each_ctrl (s, _c) { +if (!strcmp (devname,nvme_ctrl_get_name (_c))) +return true; + } +return false; + } + +return true; +} +static int nvme_attach_ns (int argc,char **argv,int attach,const char *desc,struct command *cmd) { _cleanup_free_ struct nvme_ctrl_list *cntlist = NULL;@@ -2839,12 +2856,68 @@ static int nvme_attach_ns(int argc, char **argv, int attach, const char *desc, snvme_init_ctrl_list (cntlist, num, ctrlist); -if (attach) +if (attach) { +const char *cntlid; +int __cntlid; +char *p; +nvme_host_t h; +nvme_subsystem_t s; +nvme_ctrl_t c; +nvme_root_t r =NULL ; +int matched =0 ; +nvme_scan_filter_t filter = nvme_match_subsys_device_filter; + + r =nvme_create_root (stderr, log_level); +if (!r) { +nvme_show_error ("Failed to create topology root: %s" , +nvme_strerror (errno)); +return -errno; + } + + err =nvme_scan_topology (r, filter, (void *)dev->name); +if (err <0 ) { +if (errno !=ENOENT ) +nvme_show_error ("Failed to scan topology: %s" , +nvme_strerror (errno)); +nvme_free_tree (r); +return err; + } +nvme_for_each_host (r, h) { +nvme_for_each_subsystem (h, s) { +nvme_subsystem_for_each_ctrl (s, c) { + cntlid =nvme_ctrl_get_cntlid (c); + errno =0 ; + __cntlid =strtoul (cntlid, &p,0 ); +if (errno || *p !=0 ) +continue ; +for (i =0 ; i < num; i++) { +if (__cntlid == list[i]) + matched++; + } + } + } + } + +nvme_free_tree (r); + +if (matched != num) { +fprintf (stderr, +"You are about to attach namespace 0x%x to an undiscovered nvme controller.\n" , + cfg.namespace_id); +fprintf (stderr, +"WARNING: Attaching nampespace to undiscovered nvme controller may have undesired side effect!\n" +"You may not be able to perform any IO to such namespace.\n" +"You have 10 seconds to press Ctrl-C to cancel this operation.\n\n" ); +sleep (10 ); +fprintf (stderr,"Sending attach-ns operation ...\n" ); + } + err =nvme_cli_ns_attach_ctrls (dev, cfg.namespace_id, cntlist); -else + }else { err =nvme_cli_ns_detach_ctrls (dev, cfg.namespace_id, cntlist); + }
Quoted 8 lines
nvme.c static int nvme_attach_ns(int argc, char **argv, int attach, const char *desc, s · line 2923
Quoted 3 lines
nvme.c +0
-0if (!err)printf ("%s: Success, nsid:%d\n" , cmd->name, cfg.namespace_id);Gentle ping...
If there's no objection to the above proposed patch then may I send a formal patch?
Hi Daniel,
A gentle ping, if the proposed patch looks good then may I send a formal patch?
Thanks,
--Nilay
Quoted 1 line · Nilay Shroff
A gentle ping, if the proposed patch looks good then may I send a formal patch?
Sorry for the delay, very busy month. I'll look into it next week.
Quoted 5 lines · Daniel Wagner
Quoted 1 line · Nilay Shroff
A gentle ping, if the proposed patch looks good then may I send a formal patch?
Sorry for the delay, very busy month. I'll look into it next week.
Sure no problem...
Thanks,
--Nilay
Quoted 8 lines · Nilay Shroff
Quoted 5 lines · Daniel Wagner
Quoted 1 line · Nilay Shroff
A gentle ping, if the proposed patch looks good then may I send a formal patch?
Sorry for the delay, very busy month. I'll look into it next week.
Hi Daniel,
A gentle ping, just wanted to check with you whether you got a chance to review this change?
Thanks,
--Nilay
Quoted 9 lines · Nilay Shroff
I think the information which we need to contain this issue is already available through sysfs. If we scan nvme topology then we could find the controller id assigned to each controller under each nvme subsystem. We can then leverage this information to figure out whether each controller id specified in the attach-ns command is valid or not. So essentially we match controller id specified in attach-ns command against the controller id learnt through scanning the topology. If we find that any discrepancy then we can show the WARNING to the user. I have worked out a patch using this method. I have attached the patch below for suggestion/feedback.
So this is just about issuing a warning. That's fine. I thought you want to do some more 'difficult' stuff.
Quoted 5 lines
nvme.c +0
-0
nvme.c static int delete_ns(int argc, char **argv, struct command *cmd, struct plugin * · line 2793
Quoted 10 lines
nvme.c +7
-0@@ -2784,6 +2784,23 @@ static int delete_ns(int argc, char **argv, struct command *cmd, struct plugin *return err; } +static bool nvme_match_subsys_device_filter (nvme_subsystem_t s,nvme_ctrl_t c, +nvme_ns_t ns,void *f_arg) +{ +nvme_ctrl_t _c; +const char *devname = (const char *)f_arg; + +if (s) {
use the early return pattern to avoid long indents, e.g.
if (!s)
return false;Quoted 53 lines
nvme.c +45
-1+nvme_subsystem_for_each_ctrl (s, _c) { +if (!strcmp (devname,nvme_ctrl_get_name (_c))) +return true; + } +return false; + } + +return true; +} +static int nvme_attach_ns (int argc,char **argv,int attach,const char *desc,struct command *cmd) { _cleanup_free_ struct nvme_ctrl_list *cntlist = NULL;@@ -2839,12 +2856,68 @@ static int nvme_attach_ns(int argc, char **argv, int attach, const char *desc, snvme_init_ctrl_list (cntlist, num, ctrlist); -if (attach) +if (attach) { +const char *cntlid; +int __cntlid; +char *p; +nvme_host_t h; +nvme_subsystem_t s; +nvme_ctrl_t c; +nvme_root_t r =NULL ; +int matched =0 ; +nvme_scan_filter_t filter = nvme_match_subsys_device_filter; + + r =nvme_create_root (stderr, log_level); +if (!r) { +nvme_show_error ("Failed to create topology root: %s" , +nvme_strerror (errno)); +return -errno; + } + + err =nvme_scan_topology (r, filter, (void *)dev->name); +if (err <0 ) { +if (errno !=ENOENT ) +nvme_show_error ("Failed to scan topology: %s" , +nvme_strerror (errno)); +nvme_free_tree (r); +return err; + } +nvme_for_each_host (r, h) { +nvme_for_each_subsystem (h, s) { +nvme_subsystem_for_each_ctrl (s, c) { + cntlid =nvme_ctrl_get_cntlid (c); + errno =0 ; + __cntlid =strtoul (cntlid, &p,0 ); +if (errno || *p !=0 ) +continue ; +for (i =0 ; i < num; i++) {
nvme.c static int nvme_attach_ns(int argc, char **argv, int attach, const char *desc, s · line 2903
Quoted 10 lines
nvme.c +10
-0+if (__cntlid == list[i]) + matched++; + } + } + } + } + +nvme_free_tree (r); + +if (matched != num) {
Wouldn't this check also trigger when the user wants to attach to the discovered controller?
I would also suggest to move this check into a helper function in order to keep this function a bit more readable.
Quoted 25 lines
nvme.c +13
-1+fprintf (stderr, +"You are about to attach namespace 0x%x to an undiscovered nvme controller.\n" , + cfg.namespace_id); +fprintf (stderr, +"WARNING: Attaching nampespace to undiscovered nvme controller may have undesired side effect!\n" +"You may not be able to perform any IO to such namespace.\n" +"You have 10 seconds to press Ctrl-C to cancel this operation.\n\n" ); +sleep (10 ); +fprintf (stderr,"Sending attach-ns operation ...\n" ); + } + err =nvme_cli_ns_attach_ctrls (dev, cfg.namespace_id, cntlist); - else + }else { err =nvme_cli_ns_detach_ctrls (dev, cfg.namespace_id, cntlist); + }if (!err)printf ("%s: Success, nsid:%d\n" , cmd->name, cfg.namespace_id);Thanks,
--Nilay
Quoted 32 lines · Daniel Wagner
Quoted 9 lines · Nilay Shroff
I think the information which we need to contain this issue is already available through sysfs. If we scan nvme topology then we could find the controller id assigned to each controller under each nvme subsystem. We can then leverage this information to figure out whether each controller id specified in the attach-ns command is valid or not. So essentially we match controller id specified in attach-ns command against the controller id learnt through scanning the topology. If we find that any discrepancy then we can show the WARNING to the user. I have worked out a patch using this method. I have attached the patch below for suggestion/feedback.
So this is just about issuing a warning. That's fine. I thought you want to do some more 'difficult' stuff.
Quoted 5 lines
nvme.c +0
-0nvme.c static int delete_ns(int argc, char **argv, struct command *cmd, struct plugin * · line 2793
Quoted 10 lines
nvme.c +7
-0@@ -2784,6 +2784,23 @@ static int delete_ns(int argc, char **argv, struct command *cmd, struct plugin *return err; } +static bool nvme_match_subsys_device_filter (nvme_subsystem_t s,nvme_ctrl_t c, +nvme_ns_t ns,void *f_arg) +{ +nvme_ctrl_t _c; +const char *devname = (const char *)f_arg; + +if (s) {use the early return pattern to avoid long indents, e.g.
Quoted 3 lines
if (!s)
return false;ok will do.
Quoted 58 lines
Quoted 58 lines
nvme.c +50
-1+nvme_subsystem_for_each_ctrl (s, _c) { +if (!strcmp (devname,nvme_ctrl_get_name (_c))) +return true; + } +return false; + } + +return true; +} +static int nvme_attach_ns (int argc,char **argv,int attach,const char *desc,struct command *cmd) { _cleanup_free_ struct nvme_ctrl_list *cntlist = NULL;@@ -2839,12 +2856,68 @@ static int nvme_attach_ns(int argc, char **argv, int attach, const char *desc, snvme_init_ctrl_list (cntlist, num, ctrlist); -if (attach) +if (attach) { +const char *cntlid; +int __cntlid; +char *p; +nvme_host_t h; +nvme_subsystem_t s; +nvme_ctrl_t c; +nvme_root_t r =NULL ; +int matched =0 ; +nvme_scan_filter_t filter = nvme_match_subsys_device_filter; + + r =nvme_create_root (stderr, log_level); +if (!r) { +nvme_show_error ("Failed to create topology root: %s" , +nvme_strerror (errno)); +return -errno; + } + + err =nvme_scan_topology (r, filter, (void *)dev->name); +if (err <0 ) { +if (errno !=ENOENT ) +nvme_show_error ("Failed to scan topology: %s" , +nvme_strerror (errno)); +nvme_free_tree (r); +return err; + } +nvme_for_each_host (r, h) { +nvme_for_each_subsystem (h, s) { +nvme_subsystem_for_each_ctrl (s, c) { + cntlid =nvme_ctrl_get_cntlid (c); + errno =0 ; + __cntlid =strtoul (cntlid, &p,0 ); +if (errno || *p !=0 ) +continue ; +for (i =0 ; i < num; i++) { +if (__cntlid == list[i]) + matched++; + } + } + }
Quoted 9 lines
nvme.c static int nvme_attach_ns(int argc, char **argv, int attach, const char *desc, s · line 2903
Quoted 5 lines
nvme.c +5
-0+ } + +nvme_free_tree (r); + +if (matched != num) {Wouldn't this check also trigger when the user wants to attach to the discovered controller?
Yes it will be triggered however in that case the if check would evaluate to false and hence we would not enter into the exception case.
Quoted 2 lines
I would also suggest to move this check into a helper function in order to keep this function a bit more readable.
Yeah I will create a helper and call it from nvme_attach_ns().
Quoted 20 lines
Quoted 20 lines
nvme.c +13
-1+fprintf (stderr, +"You are about to attach namespace 0x%x to an undiscovered nvme controller.\n" , + cfg.namespace_id); +fprintf (stderr, +"WARNING: Attaching nampespace to undiscovered nvme controller may have undesired side effect!\n" +"You may not be able to perform any IO to such namespace.\n" +"You have 10 seconds to press Ctrl-C to cancel this operation.\n\n" ); +sleep (10 ); +fprintf (stderr,"Sending attach-ns operation ...\n" ); + } + err =nvme_cli_ns_attach_ctrls (dev, cfg.namespace_id, cntlist); - else + }else { err =nvme_cli_ns_detach_ctrls (dev, cfg.namespace_id, cntlist); + }
Quoted 2 lines
nvme.c static int nvme_attach_ns(int argc, char **argv, int attach, const char *desc, s · line 2923
Quoted 2 lines
nvme.c +0
-0if (!err)printf ("%s: Success, nsid:%d\n" , cmd->name, cfg.namespace_id);
I think, I will send a formal patch now with above comments incorporated and we may discuss further if there's any additional comment.
Thanks,
--Nilay