meta-ti-bsp: Move legacy HS signing classes into this layer
PATCH 1/1 meta-ti-bsp: Move legacy HS signing classes into this layer
These were in the meta-arago layer, but any distro should be able to run on HS devices. So move the classes and setup to the BSP layer.
--- .../classes/kernel-fitimage-legacyhs.bbclass | 758 ++++++++++++++++++ .../classes/uboot-sign-legacyhs.bbclass | 131 +++ meta-ti-bsp/conf/machine/am335x-hs-evm.conf | 10 + meta-ti-bsp/conf/machine/am437x-hs-evm.conf | 11 + meta-ti-bsp/conf/machine/am57xx-hs-evm.conf | 11 + meta-ti-bsp/conf/machine/dra7xx-hs-evm.conf | 11 + 6 files changed, 932 insertions(+) create mode 100644 meta-ti-bsp/classes/kernel-fitimage-legacyhs.bbclass create mode 100644 meta-ti-bsp/classes/uboot-sign-legacyhs.bbclass
meta-ti-bsp/classes/kernel-fitimage-legacyhs.bbclass new file +758 -0
@@ -0,0 +1,758 @@ +inherit kernel-uboot uboot-sign-legacyhs + +FITIMAGE_HASH_ALGO ?= "sha1" +FITIMAGE_PACK_TEE ?= "0" +FITIMAGE_DTB_BY_NAME ?= "0" +FITIMAGE_TEE_BY_NAME ?= "0" +FITIMAGE_CONF_BY_NAME ?= "0" + +python __anonymous () { + kerneltypes = d.getVar('KERNEL_IMAGETYPES') or "" + if 'fitImage' in kerneltypes.split(): + depends = d.getVar("DEPENDS") + depends = "%s u-boot-mkimage-native dtc-native" % depends + d.setVar("DEPENDS", depends) + + uarch = d.getVar("UBOOT_ARCH") + if uarch == "arm64": + replacementtype = "Image" + elif uarch == "mips": + replacementtype = "vmlinuz.bin" + elif uarch == "x86": + replacementtype = "bzImage" + elif uarch == "microblaze": + replacementtype = "linux.bin" + else: + replacementtype = "zImage" + + # Override KERNEL_IMAGETYPE_FOR_MAKE variable, which is internal + # to kernel.bbclass . We have to override it, since we pack zImage + # (at least for now) into the fitImage . + typeformake = d.getVar("KERNEL_IMAGETYPE_FOR_MAKE") or "" + if 'fitImage' in typeformake.split(): + d.setVar('KERNEL_IMAGETYPE_FOR_MAKE', typeformake.replace('fitImage', replacementtype)) + + image = d.getVar('INITRAMFS_IMAGE') + if image: + d.appendVarFlag('do_assemble_fitimage_initramfs', 'depends', ' ${INITRAMFS_IMAGE}:do_image_complete') + + # Verified boot will sign the fitImage and append the public key to + # U-boot dtb. We ensure the U-Boot dtb is deployed before assembling + # the fitImage: + if d.getVar('UBOOT_SIGN_ENABLE'): + uboot_pn = d.getVar('PREFERRED_PROVIDER_u-boot') or 'u-boot' + d.appendVarFlag('do_assemble_fitimage', 'depends', ' %s:do_deploy' % uboot_pn) + + if d.getVar('FITIMAGE_PACK_TEE') == "1": + d.appendVarFlag('do_assemble_fitimage', 'depends', ' optee-os:do_deploy') +} + +# Options for the device tree compiler passed to mkimage '-D' feature: +UBOOT_MKIMAGE_DTCOPTS ??= "" + +fitimage_ti_secure() { + if test -n "${TI_SECURE_DEV_PKG}"; then + export TI_SECURE_DEV_PKG=${TI_SECURE_DEV_PKG} + ${TI_SECURE_DEV_PKG}/scripts/secure-binary-image.sh $1 $2 + else + cp $1 $2 + fi +} + +# +# Emit the fitImage ITS header +# +# $1 ... .its filename +fitimage_emit_fit_header() { + cat << EOF >> ${1} +/dts-v1/; + +/ { + description = "U-Boot fitImage for ${DISTRO_NAME}/${PV}/${MACHINE}"; + #address-cells = <1>; +EOF +} + +# +# Emit the fitImage section bits +# +# $1 ... .its filename +# $2 ... Section bit type: imagestart - image section start +# confstart - configuration section start +# sectend - section end +# fitend - fitimage end +# +fitimage_emit_section_maint() { + case $2 in + imagestart) + cat << EOF >> ${1} + + images { +EOF + ;; + confstart) + cat << EOF >> ${1} + + configurations { +EOF + ;; + sectend) + cat << EOF >> ${1} + }; +EOF + ;; + fitend) + cat << EOF >> ${1} +}; +EOF + ;; + esac +} + +# +# Emit the fitImage ITS kernel section +# +# $1 ... .its filename +# $2 ... Image counter +# $3 ... Path to kernel image +# $4 ... Compression type +fitimage_emit_section_kernel() { + + kernel_csum=${FITIMAGE_HASH_ALGO} + + ENTRYPOINT="${UBOOT_ENTRYPOINT}" + if test -n "${UBOOT_ENTRYSYMBOL}"; then + ENTRYPOINT=`${HOST_PREFIX}nm ${S}/vmlinux | \ + awk '$4=="${UBOOT_ENTRYSYMBOL}" {print $2}'` + fi + + cat << EOF >> ${1} + kernel-${2} { + description = "Linux kernel"; + data = /incbin/("${3}"); + type = "kernel"; + arch = "${UBOOT_ARCH}"; + os = "linux"; + compression = "${4}"; + load = <${UBOOT_LOADADDRESS}>; + entry = <${ENTRYPOINT}>; +EOF + if test -n "${FITIMAGE_HASH_ALGO}"; then + cat << EOF >> ${1} + hash-1 { + algo = "${kernel_csum}"; + }; +EOF + fi + cat << EOF >> ${1} + }; +EOF +} + +# +# Emit the fitImage ITS DTB section +# +# $1 ... .its filename +# $2 ... Image counter/name +# $3 ... Path to DTB image +# $4 ... Load address +fitimage_emit_section_dtb() { + + dtb_csum=${FITIMAGE_HASH_ALGO} + dtb_loadline="${4}" + + cat << EOF >> ${1} + ${2} { + description = "Flattened Device Tree blob"; + data = /incbin/("${3}"); + type = "flat_dt"; + arch = "${UBOOT_ARCH}"; + compression = "none"; + ${dtb_loadline} +EOF + if test -n "${FITIMAGE_HASH_ALGO}"; then + cat << EOF >> ${1} + hash-1 { + algo = "${dtb_csum}"; + }; +EOF + fi + cat << EOF >> ${1} + }; +EOF +} + +# +# Emit the fitImage ITS TEE section +# +# $1 ... .its filename +# $2 ... Image counter/name +# $3 ... Path to TEE image +fitimage_emit_section_tee() { + + tee_csum=${FITIMAGE_HASH_ALGO} + + cat << EOF >> ${1} + ${2} { + description = "OPTEE OS Image"; + data = /incbin/("${3}"); + type = "tee"; + arch = "${UBOOT_ARCH}"; + compression = "none"; +EOF + if test -n "${FITIMAGE_HASH_ALGO}"; then + cat << EOF >> ${1} + hash-1 { + algo = "${tee_csum}"; + }; +EOF + fi + cat << EOF >> ${1} + }; +EOF +} + +# +# Emit the fitImage ITS setup section +# +# $1 ... .its filename +# $2 ... Image counter +# $3 ... Path to setup image +fitimage_emit_section_setup() { + + setup_csum=${FITIMAGE_HASH_ALGO} + + cat << EOF >> ${1} + setup-${2} { + description = "Linux setup.bin"; + data = /incbin/("${3}"); + type = "x86_setup"; + arch = "${UBOOT_ARCH}"; + os = "linux"; + compression = "none"; + load = <0x00090000>; + entry = <0x00090000>; +EOF + if test -n "${FITIMAGE_HASH_ALGO}"; then + cat << EOF >> ${1} + hash-1 { + algo = "${setup_csum}"; + }; +EOF + fi + cat << EOF >> ${1} + }; +EOF +} + +# +# Emit the fitImage ITS ramdisk section +# +# $1 ... .its filename +# $2 ... Image counter +# $3 ... Path to ramdisk image +fitimage_emit_section_ramdisk() { + + ramdisk_csum=${FITIMAGE_HASH_ALGO} + ramdisk_ctype="none" + + case $3 in + *.gz|*.gz.sec) + ramdisk_ctype="gzip" + ;; + *.bz2|*.bz2.sec) + ramdisk_ctype="bzip2" + ;; + *.lzma|*.lzma.sec) + ramdisk_ctype="lzma" + ;; + *.lzo|*.lzo.sec) + ramdisk_ctype="lzo" + ;; + *.lz4|*.lz4.sec) + ramdisk_ctype="lz4" + ;; + esac + + cat << EOF >> ${1} + ramdisk-${2} { + description = "ramdisk image"; + data = /incbin/("${3}"); + type = "ramdisk"; + arch = "${UBOOT_ARCH}"; + os = "linux"; + compression = "${ramdisk_ctype}"; +EOF + if test -n "${UBOOT_RD_LOADADDRESS}"; then + cat << EOF >> ${1} + load = <${UBOOT_RD_LOADADDRESS}>; +EOF + fi + + if test -n "${UBOOT_RD_ENTRYPOINT}"; then + cat << EOF >> ${1} + entry = <${UBOOT_RD_ENTRYPOINT}>; +EOF + fi + + if test -n "${FITIMAGE_HASH_ALGO}"; then + cat << EOF >> ${1} + hash-1 { + algo = "${ramdisk_csum}"; + }; +EOF + fi + cat << EOF >> ${1} + }; +EOF +} + +# +# Emit the fitImage ITS configuration section +# +# $1 ... .its filename +# $2 ... Linux kernel ID +# $3 ... DTB image ID/name +# $4 ... ramdisk ID +# $5 ... config ID +# $6 ... tee ID/name +fitimage_emit_section_config() { + + conf_csum=${FITIMAGE_HASH_ALGO} + if [ -n "${UBOOT_SIGN_ENABLE}" ] ; then + conf_sign_keyname="${UBOOT_SIGN_KEYNAME}" + fi + + sep="" + conf_desc="" + kernel_line="" + fdt_line="" + ramdisk_line="" + setup_line="" + default_line="" + + if [ -n "${2}" ]; then + conf_desc="Linux kernel" + sep=", " + kernel_line="kernel = \"kernel-${2}\";" + fi + + if [ -n "${3}" ]; then + conf_desc="${conf_desc}${sep}FDT blob" + sep=", " + fi + + if [ -n "${4}" ]; then + conf_desc="${conf_desc}${sep}ramdisk" + sep=", " + ramdisk_line="ramdisk = \"ramdisk-${4}\";" + fi + + if [ -n "${5}" ]; then + conf_desc="${conf_desc}${sep}setup" + sep=", " + setup_line="setup = \"setup-${5}\";" + fi + + if [ -n "${6}" -a "x${FITIMAGE_PACK_TEE}" = "x1" ]; then + if [ "x${FITIMAGE_TEE_BY_NAME}" = "x1" ]; then + loadables_line="loadables = \"${6}.optee\";" + loadables_pager_line="loadables = \"${6}-pager.optee\";" + else + loadables_line="loadables = \"tee-${6}\";" + nextnum=`expr ${6} + 1` + loadables_pager_line="loadables = \"tee-${nextnum}\";" + fi + final_conf_desc="${conf_desc}${sep}OPTEE OS Image" + else + loadables_line="" + loadables_pager_line="" + final_conf_desc="${conf_desc}" + fi + + dtbcount=1 + for DTB in ${KERNEL_DEVICETREE}; do + DTB=$(basename "${DTB}") + dtb_ext=${DTB##*.} + if [ "x${FITIMAGE_CONF_BY_NAME}" = "x1" ] ; then + conf_name="${DTB}" + else + conf_name="conf-${dtbcount}" + fi + + if [ "x${FITIMAGE_DTB_BY_NAME}" = "x1" ] ; then + fdt_line="fdt = \"${DTB}\";" + else + fdt_line="fdt = \"fdt-${dtbcount}\";" + fi + + if [ "x${dtbcount}" = "x1" ]; then + cat << EOF >> ${1} + default = "${conf_name}"; +EOF + fi + +# Generate a single configuration section + cat << EOF >> ${1} + ${conf_name} { + description = "${final_conf_desc}"; + ${fdt_line} +EOF + if [ "${dtb_ext}" != "dtbo" ]; then + cat << EOF >> ${1} + ${kernel_line} + ${ramdisk_line} + ${setup_line} + ${loadables_line} +EOF + fi + if test -n "${FITIMAGE_HASH_ALGO}"; then + cat << EOF >> ${1} + hash-1 { + algo = "${conf_csum}"; + }; +EOF + fi + + if [ ! -z "${conf_sign_keyname}" ] ; then + + sign_line="sign-images = \"kernel\"" + + if [ -n "${3}" ]; then + sign_line="${sign_line}, \"fdt\"" + fi + + if [ -n "${4}" ]; then + sign_line="${sign_line}, \"ramdisk\"" + fi + + if [ -n "${5}" ]; then + sign_line="${sign_line}, \"setup\"" + fi + + sign_line="${sign_line};" + + cat << EOF >> ${1} + signature-1 { + algo = "${conf_csum},rsa2048"; + key-name-hint = "${conf_sign_keyname}"; + ${sign_line} + }; +EOF + fi + + cat << EOF >> ${1} + }; +EOF +# End single config section + +# Generate a single "pager" configuration section + if [ "${OPTEEPAGER}" = "y" ]; then + if [ "x${FITIMAGE_CONF_BY_NAME}" = "x1" ] ; then + conf_name="${DTB}-pager" + else + conf_name="conf-${dtbcount}" + fi + + cat << EOF >> ${1} + ${conf_name} { + description = "${final_conf_desc}"; + ${fdt_line} +EOF + if [ "${dtb_ext}" != "dtbo" ]; then + cat << EOF >> ${1} + ${kernel_line} + ${ramdisk_line} + ${setup_line} + ${loadables_pager_line} +EOF + fi + if test -n "${FITIMAGE_HASH_ALGO}"; then + cat << EOF >> ${1} + hash-1 { + algo = "${conf_csum}"; + }; +EOF + fi + + if [ ! -z "${conf_sign_keyname}" ] ; then + + sign_line="sign-images = \"kernel\"" + + if [ -n "${3}" ]; then + sign_line="${sign_line}, \"fdt\"" + fi + + if [ -n "${4}" ]; then + sign_line="${sign_line}, \"ramdisk\"" + fi + + if [ -n "${5}" ]; then + sign_line="${sign_line}, \"setup\"" + fi + + sign_line="${sign_line};" + + cat << EOF >> ${1} + signature-1 { + algo = "${conf_csum},rsa2048"; + key-name-hint = "${conf_sign_keyname}"; + ${sign_line} + }; +EOF + fi + + cat << EOF >> ${1} + }; +EOF + fi +# End single config section + + dtbcount=`expr ${dtbcount} + 1` + done +} + +# +# Assemble fitImage +# +# $1 ... .its filename +# $2 ... fitImage name +# $3 ... include ramdisk +fitimage_assemble() { + kernelcount=1 + dtbcount="" + ramdiskcount=${3} + setupcount="" + teecount=1 + rm -f ${1} arch/${ARCH}/boot/${2} + + fitimage_emit_fit_header ${1} + + # + # Step 1: Prepare a kernel image section. + # + fitimage_emit_section_maint ${1} imagestart + + uboot_prep_kimage + fitimage_ti_secure linux.bin linux.bin.sec + fitimage_emit_section_kernel ${1} "${kernelcount}" linux.bin.sec "${linux_comp}" + + # + # Step 2: Prepare a DTB image section + # + if test -n "${KERNEL_DEVICETREE}"; then + dtbcount=1 + dtboaddress="${UBOOT_DTBO_LOADADDRESS}" + for DTB in ${KERNEL_DEVICETREE}; do + if echo ${DTB} | grep -q '/dts/'; then + bbwarn "${DTB} contains the full path to the the dts file, but only the dtb name should be used." + DTB=`basename ${DTB} | sed 's,\.dts$,.dtb,g'` + fi + DTB_PATH="arch/${ARCH}/boot/dts/${DTB}" + if [ ! -e "${DTB_PATH}" ]; then + DTB_PATH="arch/${ARCH}/boot/${DTB}" + fi + DTB=$(basename "${DTB}") + + dtb_ext=${DTB##*.} + if [ "${dtb_ext}" = "dtbo" ]; then + if [ -n "${UBOOT_DTBO_LOADADDRESS}" ]; then + dtb_loadline="load = <${dtboaddress}>;" + num1=`printf "%d\n" ${dtboaddress}` + num2=`printf "%d\n" ${UBOOT_DTBO_OFFSET}` + num3=`expr $num1 + $num2` + dtboaddress=`printf "0x%x\n" $num3` + fi + elif [ -n "${UBOOT_DTB_LOADADDRESS}" ]; then + dtb_loadline="load = <${UBOOT_DTB_LOADADDRESS}>;" + fi + + fitimage_ti_secure ${DTB_PATH} ${DTB_PATH}.sec + if [ "x${FITIMAGE_DTB_BY_NAME}" = "x1" ] ; then + fitimage_emit_section_dtb ${1} ${DTB} ${DTB_PATH}.sec "${dtb_loadline}" + else + fitimage_emit_section_dtb ${1} "fdt-${dtbcount}" ${DTB_PATH}.sec "${dtb_loadline}" + fi + if [ "x${dtbcount}" = "x1" ]; then + dtbref=${DTB} + fi + dtbcount=`expr ${dtbcount} + 1` + done + fi + + # + # Step 2a: Prepare OP/TEE image section + # + if [ "x${FITIMAGE_PACK_TEE}" = "x1" ] ; then + mkdir -p ${B}/usr + rm -f ${B}/usr/${OPTEEFLAVOR}.optee + if [ -e "${DEPLOY_DIR_IMAGE}/${OPTEEFLAVOR}.optee" ]; then + cp ${DEPLOY_DIR_IMAGE}/${OPTEEFLAVOR}.optee ${B}/usr/. + fi + TEE_PATH="usr/${OPTEEFLAVOR}.optee" + fitimage_ti_secure ${TEE_PATH} ${TEE_PATH}.sec + if [ "x${FITIMAGE_TEE_BY_NAME}" = "x1" ] ; then + fitimage_emit_section_tee ${1} ${OPTEEFLAVOR}.optee ${TEE_PATH}.sec + else + fitimage_emit_section_tee ${1} "tee-${teecount}" ${TEE_PATH}.sec + fi + + if [ "${OPTEEPAGER}" = "y" ]; then + teecount=`expr ${teecount} + 1` + rm -f ${B}/usr/${OPTEEFLAVOR}-pager.optee + if [ -e "${DEPLOY_DIR_IMAGE}/${OPTEEFLAVOR}-pager.optee" ]; then + cp ${DEPLOY_DIR_IMAGE}/${OPTEEFLAVOR}-pager.optee ${B}/usr/. + fi + TEE_PATH="usr/${OPTEEFLAVOR}-pager.optee" + fitimage_ti_secure ${TEE_PATH} ${TEE_PATH}.sec + if [ "x${FITIMAGE_TEE_BY_NAME}" = "x1" ] ; then + fitimage_emit_section_tee ${1} ${OPTEEFLAVOR}-pager.optee ${TEE_PATH}.sec + else + fitimage_emit_section_tee ${1} "tee-${teecount}" ${TEE_PATH}.sec + fi + fi + fi + + # + # Step 3: Prepare a setup section. (For x86) + # + if test -e arch/${ARCH}/boot/setup.bin ; then + setupcount=1 + fitimage_emit_section_setup ${1} "${setupcount}" arch/${ARCH}/boot/setup.bin + fi + + # + # Step 4: Prepare a ramdisk section. + # + if [ "x${ramdiskcount}" = "x1" ] ; then + # Find and use the first initramfs image archive type we find + for img in cpio.lz4 cpio.lzo cpio.lzma cpio.xz cpio.gz cpio; do + initramfs_path="${DEPLOY_DIR_IMAGE}/${INITRAMFS_IMAGE}-${MACHINE}.${img}" + initramfs_local="usr/${INITRAMFS_IMAGE}-${MACHINE}.${img}" + echo "Using $initramfs_path" + if [ -e "${initramfs_path}" ]; then + fitimage_ti_secure ${initramfs_path} ${initramfs_local}.sec + fitimage_emit_section_ramdisk ${1} "${ramdiskcount}" ${initramfs_local}.sec + break + fi + done + fi + + fitimage_emit_section_maint ${1} sectend + + # Force the first Kernel and DTB in the default config + kernelcount=1 + if test -n "${dtbcount}"; then + dtbcount=1 + fi + teecount=1 + + # + # Step 5: Prepare a configurations section + # + fitimage_emit_section_maint ${1} confstart + + if [ "x${FITIMAGE_DTB_BY_NAME}" != "x1" ] ; then + dtbref="fdt-${dtbcount}" + fi + if [ "x${FITIMAGE_TEE_BY_NAME}" = "x1" ] ; then + teeref="${OPTEEFLAVOR}" + else + teeref="${teecount}" + fi + fitimage_emit_section_config ${1} "${kernelcount}" "${dtbref}" "${ramdiskcount}" "${setupcount}" "${teeref}" + + fitimage_emit_section_maint ${1} sectend + + fitimage_emit_section_maint ${1} fitend + + # + # Step 6: Assemble the image + # + uboot-mkimage \ + ${@'-D "${UBOOT_MKIMAGE_DTCOPTS}"' if len('${UBOOT_MKIMAGE_DTCOPTS}') else ''} \ + -f ${1} \ + arch/${ARCH}/boot/${2} + + # + # Step 7: Sign the image and add public key to U-Boot dtb + # + if [ "x${UBOOT_SIGN_ENABLE}" = "x1" ] ; then + uboot-mkimage \ + ${@'-D "${UBOOT_MKIMAGE_DTCOPTS}"' if len('${UBOOT_MKIMAGE_DTCOPTS}') else ''} \ + -F -k "${UBOOT_SIGN_KEYDIR}" \ + -K "${DEPLOY_DIR_IMAGE}/${UBOOT_DTB_BINARY}" \ + -r arch/${ARCH}/boot/${2} + fi +} + +do_assemble_fitimage() { + if echo ${KERNEL_IMAGETYPES} | grep -wq "fitImage"; then + cd ${B} + fitimage_assemble fit-image.its fitImage + fi +} + +addtask assemble_fitimage before do_install after do_compile + +do_assemble_fitimage_initramfs() { + if echo ${KERNEL_IMAGETYPES} | grep -wq "fitImage" && \ + test -n "${INITRAMFS_IMAGE}" ; then + cd ${B} + fitimage_assemble fit-image-${INITRAMFS_IMAGE}.its fitImage-${INITRAMFS_IMAGE} 1 + fi +} + +addtask assemble_fitimage_initramfs before do_deploy after do_install + +FITIMAGE_ITS_SUFFIX ?= "its" +FITIMAGE_ITB_SUFFIX ?= "itb" + +FITIMAGE_ITS_IMAGE ?= "fitImage-its-${PKGE}-${PKGV}-${PKGR}-${MACHINE}-${DATETIME}.${FITIMAGE_ITS_SUFFIX}" +FITIMAGE_ITS_IMAGE[vardepsexclude] = "DATETIME" +FITIMAGE_ITS_BINARY ?= "fitImage-its.${FITIMAGE_ITS_SUFFIX}" +FITIMAGE_ITS_SYMLINK ?= "fitImage-its-${MACHINE}.${FITIMAGE_ITS_SUFFIX}" + +FITIMAGE_ITB_IMAGE ?= "fitImage-linux.bin-${PKGE}-${PKGV}-${PKGR}-${MACHINE}-${DATETIME}.${FITIMAGE_ITB_SUFFIX}" +FITIMAGE_ITB_IMAGE[vardepsexclude] = "DATETIME" +FITIMAGE_ITB_BINARY ?= "fitImage-linux.bin.${FITIMAGE_ITB_SUFFIX}" +FITIMAGE_ITB_SYMLINK ?= "fitImage-linux.bin-${MACHINE}.${FITIMAGE_ITB_SUFFIX}" + +FITIMAGE_INITRAMFS_ITS_IMAGE ?= "fitImage-its-${INITRAMFS_IMAGE}-${PKGE}-${PKGV}-${PKGR}-${MACHINE}-${DATETIME}.${FITIMAGE_ITS_SUFFIX}" +FITIMAGE_INITRAMFS_ITS_IMAGE[vardepsexclude] = "DATETIME" +FITIMAGE_INITRAMFS_ITS_BINARY ?= "fitImage-its-${INITRAMFS_IMAGE}.${FITIMAGE_ITS_SUFFIX}" +FITIMAGE_INITRAMFS_ITS_SYMLINK ?= "fitImage-its-${INITRAMFS_IMAGE}-${MACHINE}.${FITIMAGE_ITS_SUFFIX}" + +FITIMAGE_INITRAMFS_ITB_IMAGE ?= "fitImage-${INITRAMFS_IMAGE}-${PKGE}-${PKGV}-${PKGR}-${MACHINE}-${DATETIME}.${FITIMAGE_ITB_SUFFIX}" +FITIMAGE_INITRAMFS_ITB_IMAGE[vardepsexclude] = "DATETIME" +FITIMAGE_INITRAMFS_ITB_BINARY ?= "fitImage-${INITRAMFS_IMAGE}.${FITIMAGE_ITB_SUFFIX}" +FITIMAGE_INITRAMFS_ITB_SYMLINK ?= "fitImage-${INITRAMFS_IMAGE}-${MACHINE}.${FITIMAGE_ITB_SUFFIX}" + +kernel_do_deploy:append() { + # Update deploy directory + if echo ${KERNEL_IMAGETYPES} | grep -wq "fitImage"; then + cd ${B} + echo "Copying fit-image.its source file..." + install -m 0644 fit-image.its ${DEPLOYDIR}/${FITIMAGE_ITS_IMAGE} + install -m 0644 arch/${ARCH}/boot/fitImage ${DEPLOYDIR}/${FITIMAGE_ITB_IMAGE} + + if [ -n "${INITRAMFS_IMAGE}" ]; then + echo "Copying fit-image-${INITRAMFS_IMAGE}.its source file..." + install -m 0644 fit-image-${INITRAMFS_IMAGE}.its ${DEPLOYDIR}/${FITIMAGE_INITRAMFS_ITS_IMAGE} + install -m 0644 arch/${ARCH}/boot/fitImage-${INITRAMFS_IMAGE} ${DEPLOYDIR}/${FITIMAGE_INITRAMFS_ITB_IMAGE} + fi + + cd ${DEPLOYDIR} + ln -sf ${FITIMAGE_ITS_IMAGE} ${FITIMAGE_ITS_SYMLINK} + ln -sf ${FITIMAGE_ITS_IMAGE} ${FITIMAGE_ITS_BINARY} + ln -sf ${FITIMAGE_ITB_IMAGE} ${FITIMAGE_ITB_SYMLINK} + ln -sf ${FITIMAGE_ITB_IMAGE} ${FITIMAGE_ITB_BINARY} + + if [ -n "${INITRAMFS_IMAGE}" ]; then + ln -sf ${FITIMAGE_INITRAMFS_ITS_IMAGE} ${FITIMAGE_INITRAMFS_ITS_SYMLINK} + ln -sf ${FITIMAGE_INITRAMFS_ITS_IMAGE} ${FITIMAGE_INITRAMFS_ITS_BINARY} + ln -sf ${FITIMAGE_INITRAMFS_ITB_IMAGE} ${FITIMAGE_INITRAMFS_ITB_SYMLINK} + ln -sf ${FITIMAGE_INITRAMFS_ITB_IMAGE} ${FITIMAGE_INITRAMFS_ITB_BINARY} + fi + fi +}
meta-ti-bsp/classes/uboot-sign-legacyhs.bbclass new file +131 -0
131 lines not on this page · raw message
meta-ti-bsp/conf/machine/am335x-hs-evm.conf +10 -0
@@ -16,3 +16,13 @@ UBOOT_RD_LOADADDRESS = "0x84000000" UBOOT_RD_ENTRYPOINT = "0x84000000" TI_SECURE_DEV_PKG = "${TI_SECURE_DEV_PKG_CAT}/am3x" + +# FIT image for legacy secure devices +KERNEL_CLASSES:append = " kernel-fitimage-legacyhs" +KERNEL_IMAGETYPES:append = " fitImage" + +# FIT image settings +FITIMAGE_HASH_ALGO = "" +FITIMAGE_DTB_BY_NAME = "1" +FITIMAGE_TEE_BY_NAME = "1" +FITIMAGE_CONF_BY_NAME = "1"
meta-ti-bsp/conf/machine/am437x-hs-evm.conf +11 -0
@@ -18,3 +18,14 @@ OPTEEFLAVOR = "am43xx" OPTEEOUTPUTMACHINE = "ti" EXTRA_IMAGEDEPENDS += "optee-os" + +# FIT image for legacy secure devices +KERNEL_CLASSES:append = " kernel-fitimage-legacyhs" +KERNEL_IMAGETYPES:append = " fitImage" + +# FIT image settings +FITIMAGE_HASH_ALGO = "" +FITIMAGE_PACK_TEE = "1" +FITIMAGE_DTB_BY_NAME = "1" +FITIMAGE_TEE_BY_NAME = "1" +FITIMAGE_CONF_BY_NAME = "1"
meta-ti-bsp/conf/machine/am57xx-hs-evm.conf +11 -0
@@ -19,3 +19,14 @@ OPTEEOUTPUTMACHINE = "ti" OPTEEPAGER = "y" EXTRA_IMAGEDEPENDS += "optee-os" + +# FIT image for legacy secure devices +KERNEL_CLASSES:append = " kernel-fitimage-legacyhs" +KERNEL_IMAGETYPES:append = " fitImage" + +# FIT image settings +FITIMAGE_HASH_ALGO = "" +FITIMAGE_PACK_TEE = "1" +FITIMAGE_DTB_BY_NAME = "1" +FITIMAGE_TEE_BY_NAME = "1" +FITIMAGE_CONF_BY_NAME = "1"
meta-ti-bsp/conf/machine/dra7xx-hs-evm.conf +11 -0
@@ -19,3 +19,14 @@ OPTEEOUTPUTMACHINE = "ti" OPTEEPAGER = "y" EXTRA_IMAGEDEPENDS += "optee-os" + +# FIT image for legacy secure devices +KERNEL_CLASSES:append = " kernel-fitimage-legacyhs" +KERNEL_IMAGETYPES:append = " fitImage" + +# FIT image settings +FITIMAGE_HASH_ALGO = "" +FITIMAGE_PACK_TEE = "1" +FITIMAGE_DTB_BY_NAME = "1" +FITIMAGE_TEE_BY_NAME = "1" +FITIMAGE_CONF_BY_NAME = "1"
Signature · 1 line
2.38.1
Quoted 2 lines · Andrew Davis via lists.yoctoproject.org
These were in the meta-arago layer, but any distro should be able to run on HS devices. So move the classes and setup to the BSP layer.
Well, the class itself hasn't been updated for long time, besides few fixes and the rename. I guess since it is used for legacy platforms, not much can be done...
Quoted 11 lines
Signed-off-by Andrew Davis <[email protected]>--- .../classes/kernel-fitimage-legacyhs.bbclass | 758 ++++++++++++++++++ .../classes/uboot-sign-legacyhs.bbclass | 131 +++ meta-ti-bsp/conf/machine/am335x-hs-evm.conf | 10 + meta-ti-bsp/conf/machine/am437x-hs-evm.conf | 11 + meta-ti-bsp/conf/machine/am57xx-hs-evm.conf | 11 + meta-ti-bsp/conf/machine/dra7xx-hs-evm.conf | 11 + 6 files changed, 932 insertions(+) create mode 100644 meta-ti-bsp/classes/kernel-fitimage-legacyhs.bbclass create mode 100644 meta-ti-bsp/classes/uboot-sign-legacyhs.bbclass
<snip>
meta-ti-bsp/conf/machine/am335x-hs-evm.conf UBOOT_RD_LOADADDRESS = "0x84000000" · line 22
Quoted 12 lines
meta-ti-bsp/conf/machine/am335x-hs-evm.conf +4
-0@@ -16,3 +16,13 @@ UBOOT_RD_LOADADDRESS = "0x84000000" UBOOT_RD_ENTRYPOINT = "0x84000000" TI_SECURE_DEV_PKG = "${TI_SECURE_DEV_PKG_CAT}/am3x" + +# FIT image for legacy secure devices +KERNEL_CLASSES:append = " kernel-fitimage-legacyhs" +KERNEL_IMAGETYPES:append = " fitImage"
Better use += here. Originally these were machine-specific appends in the distro config, but can and should be simply += here in the machine configs. As append and remove overrides are very hard to undo downstream.
Same comment for all 4 platforms, of course.
Signature · 1 line
Denys
Quoted 8 lines · Denys Dmytriyenko
Quoted 2 lines · Andrew Davis via lists.yoctoproject.org
These were in the meta-arago layer, but any distro should be able to run on HS devices. So move the classes and setup to the BSP layer.
Well, the class itself hasn't been updated for long time, besides few fixes and the rename. I guess since it is used for legacy platforms, not much can be done...
Right, wasn't sure if it was worth updating to match the latest in upstream, but if it is not broke lets not fix it today..
Quoted 33 lines
Quoted 12 lines
Signed-off-by Andrew Davis <[email protected]>--- .../classes/kernel-fitimage-legacyhs.bbclass | 758 ++++++++++++++++++ .../classes/uboot-sign-legacyhs.bbclass | 131 +++ meta-ti-bsp/conf/machine/am335x-hs-evm.conf | 10 + meta-ti-bsp/conf/machine/am437x-hs-evm.conf | 11 + meta-ti-bsp/conf/machine/am57xx-hs-evm.conf | 11 + meta-ti-bsp/conf/machine/dra7xx-hs-evm.conf | 11 + 6 files changed, 932 insertions(+)create mode 100644 meta-ti-bsp/classes/kernel-fitimage-legacyhs.bbclass create mode 100644 meta-ti-bsp/classes/uboot-sign-legacyhs.bbclass
<snip>
meta-ti-bsp/conf/machine/am335x-hs-evm.conf UBOOT_RD_LOADADDRESS = "0x84000000" · line 22
Quoted 12 lines
meta-ti-bsp/conf/machine/am335x-hs-evm.conf +4
-0@@ -16,3 +16,13 @@ UBOOT_RD_LOADADDRESS = "0x84000000" UBOOT_RD_ENTRYPOINT = "0x84000000" TI_SECURE_DEV_PKG = "${TI_SECURE_DEV_PKG_CAT}/am3x" + +# FIT image for legacy secure devices +KERNEL_CLASSES:append = " kernel-fitimage-legacyhs" +KERNEL_IMAGETYPES:append = " fitImage"Better use += here. Originally these were machine-specific appends in the distro config, but can and should be simply += here in the machine configs. As append and remove overrides are very hard to undo downstream.
Quoted 2 lines
Same comment for all 4 platforms, of course.
Makes sense, will fix for v2.
Thanks,
Andrew