SPI command support for ARM AT91rm9200
PATCH 1/1 SPI command support for ARM AT91rm9200
DESCRIPTION
-----------
The patch provides the spi_xfer funtion, which used by cmd_spi.c to support the sspi command for all at91rm9200 boards.
This patch is based on Ulf Samuelsson's at45 split patch, but don't include this
-------------- next part --------------
An embedded and charset-unspecified text was scrubbed...
Name: at91rm9200_spi_cmd.patch
Url: http://lists.denx.de/pipermail/u-boot/attachments/20070612/5e5e59a7/attachment.txt
PATCH 1/1 SPI command support for ARM AT91rm9200
----- Original Message -----
From: "Jens Scharsig" <[email protected]>
To: <[email protected]>
Sent: Tuesday, June 12, 2007 10:30 AM
Subject: [U-Boot-Users] [PATCH] SPI command support for ARM AT91rm9200
Quoted 12 lines
Signed-off-by Jens Scharsig <[email protected]>DESCRIPTION
-----------The patch provides the
spi_xferfuntion, which used bycmd_spi.cto support the sspi command for all at91rm9200 boards.This patch is based on Ulf Samuelsson's at45 split patch, but don't include this
Applying this patch will crash existing AT91RM9200 boards since the subroutines will be defined in two files. board/<board>/at45.c must not be built.
Also, it is not recommended to run the SPI faster than 5 Mbps unless you really know what you are doing.
The at45split patch is still in the patch queue, and Peter said he should be able to review it this week.
Best Regards
Ulf Samuelsson
PATCH 1/1 SPI command support for ARM AT91rm9200
Quoted 8 lines
Applying this patch will crash existing AT91RM9200 boards since the subroutines will be defined in two files. board/<board>/at45.c must not be built.
The at45split patch is still in the patch queue, and Peter said he should be able to review it this week.
Ok,I use the split patch at this time. I will update my patch, if your patch availible in git tree.
Regards Jens