x86: Switch X86_FEATURE_XENPV to cpu_feature_enabled() use
Subsystems (4)
v2 cover x86: Switch X86_FEATURE_XENPV to cpu_feature_enabled() use
Make especially kernels without CONFIG_XEN_PV more efficient by using cpu_feature_enabled(X86_FEATURE_XENPV) instead of boot_cpu_has() and friends.
Changes in V2:
- new patch 4
Juergen Gross (5):
x86: add X86_FEATURE_XENPV to disabled-features.h
x86: remove unneeded 64-bit dependency in arch_enter_from_user_mode()
x86: drop 32-bit Xen PV guest code in update_task_stack()
x86: remove X86_FEATURE_XENPV usage in setup_cpu_entry_area()
x86: switch to cpu_feature_enabled() for X86_FEATURE_XENPV
arch/x86/include/asm/disabled-features.h | 8 +++++++- arch/x86/include/asm/entry-common.h | 4 ++-- arch/x86/include/asm/switch_to.h | 7 ++----- arch/x86/kernel/cpu/amd.c | 2 +- arch/x86/kernel/cpu/bugs.c | 2 +- arch/x86/kernel/cpu/hygon.c | 2 +- arch/x86/kernel/process_64.c | 4 ++-- arch/x86/kernel/topology.c | 2 +- arch/x86/mm/cpu_entry_area.c | 8 ++------ 9 files changed, 19 insertions(+), 20 deletions(-)
Signature · 1 line
2.35.3
PATCH v2 1/5 x86: add X86_FEATURE_XENPV to disabled-features.h
Add X86_FEATURE_XENPV to the features handled specially in disabled-features.h.
--- arch/x86/include/asm/disabled-features.h | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)
arch/x86/include/asm/disabled-features.h +7 -1
@@ -81,6 +81,12 @@# define DISABLE_SGX (1 << (X86_FEATURE_SGX & 31))#endif +#ifdef CONFIG_XEN_PV +# define DISABLE_XENPV 0 +#else +# define DISABLE_XENPV (1 << (X86_FEATURE_XENPV & 31)) +#endif +#ifdef CONFIG_INTEL_TDX_GUEST # define DISABLE_TDX_GUEST 0#else
@@ -98,7 +104,7 @@#define DISABLED_MASK5 0#define DISABLED_MASK6 0#define DISABLED_MASK7 (DISABLE_PTI) -#define DISABLED_MASK8 (DISABLE_TDX_GUEST) +#define DISABLED_MASK8 (DISABLE_XENPV|DISABLE_TDX_GUEST)#define DISABLED_MASK9 (DISABLE_SGX)#define DISABLED_MASK10 0#define DISABLED_MASK11 (DISABLE_RETPOLINE|DISABLE_RETHUNK|DISABLE_UNRET)
Signature · 1 line
2.35.3
Re: [PATCH v2 1/5] x86: add X86_FEATURE_XENPV to disabled-features.h
Quoted 2 lines · Juergen Gross
Add
X86_FEATURE_XENPVto the features handled specially indisabled-features.h.
[tip: x86/cpu] x86/cpufeatures: Add X86_FEATURE_XENPV to disabled-features.h
In reply to Juergen GrossThe following commit has been merged into the x86/cpu branch of tip:
The following commit has been merged into the x86/cpu branch of tip:
Commit-ID: 15e15d64bd8e12d835f6bb1b1ce3ffa13fa03a66 Gitweb: https://git.kernel.org/tip/15e15d64bd8e12d835f6bb1b1ce3ffa13fa03a66 Author: Juergen Gross <[email protected]> AuthorDate: Fri, 04 Nov 2022 08:26:57 +01:00 Committer: Borislav Petkov <[email protected]> CommitterDate: Tue, 22 Nov 2022 15:42:33 +01:00
x86/cpufeatures: Add X86_FEATURE_XENPV to disabled-features.h
Add X86_FEATURE_XENPV to the features handled specially in disabled-features.h.
--- arch/x86/include/asm/disabled-features.h | 8 +++++++- 1 file changed, 7 insertions(+), 1 deletion(-)
arch/x86/include/asm/disabled-features.h +7 -1
@@ -81,6 +81,12 @@# define DISABLE_SGX (1 << (X86_FEATURE_SGX & 31))#endif +#ifdef CONFIG_XEN_PV +# define DISABLE_XENPV 0 +#else +# define DISABLE_XENPV (1 << (X86_FEATURE_XENPV & 31)) +#endif +#ifdef CONFIG_INTEL_TDX_GUEST # define DISABLE_TDX_GUEST 0#else
@@ -98,7 +104,7 @@#define DISABLED_MASK5 0#define DISABLED_MASK6 0#define DISABLED_MASK7 (DISABLE_PTI) -#define DISABLED_MASK8 (DISABLE_TDX_GUEST) +#define DISABLED_MASK8 (DISABLE_XENPV|DISABLE_TDX_GUEST)#define DISABLED_MASK9 (DISABLE_SGX)#define DISABLED_MASK10 0#define DISABLED_MASK11 (DISABLE_RETPOLINE|DISABLE_RETHUNK|DISABLE_UNRET)
PATCH v2 2/5 x86: remove unneeded 64-bit dependency in arch_enter_from_user_mode()
In reply to Juergen GrossThe check for 64-bit mode when testing X86_FEATURE_XENPV isn't needed, as Xen PV guests are no longer supported in 32-bit mode.
While at it switch from boot_cpu_has() to cpu_feature_enabled().
--- arch/x86/include/asm/entry-common.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
arch/x86/include/asm/entry-common.h +2 -2
@@ -24,8 +24,8 @@ static __always_inline void arch_enter_from_user_mode(struct pt_regs *regs)/* * For !SMAP hardware we patch out CLAC on entry. */ -if (boot_cpu_has (X86_FEATURE_SMAP ) || - (IS_ENABLED (CONFIG_64BIT ) &&boot_cpu_has (X86_FEATURE_XENPV ))) +if (cpu_feature_enabled (X86_FEATURE_SMAP ) || +cpu_feature_enabled (X86_FEATURE_XENPV )) mask |=X86_EFLAGS_AC ;WARN_ON_ONCE (flags & mask);
Signature · 1 line
2.35.3
Re: [PATCH v2 2/5] x86: remove unneeded 64-bit dependency in arch_enter_from_user_mode()
Quoted 2 lines · Juergen Gross
The check for 64-bit mode when testing
X86_FEATURE_XENPVisn't needed, as Xen PV guests are no longer supported in 32-bit mode.
Tiniest nit if you revise this: please call out that this "no longer supported" thing is enforced in Kconfig. It's not just some random edict where we pronounced 32-bit PV guests unsupported.
Otherwise:
[tip: x86/cpu] x86/cpu: Remove unneeded 64-bit dependency in arch_enter_from_user_mode()
In reply to Juergen GrossThe following commit has been merged into the x86/cpu branch of tip:
The following commit has been merged into the x86/cpu branch of tip:
Commit-ID: 0bafc51babe2344e9b0ff6629a4f044727728349 Gitweb: https://git.kernel.org/tip/0bafc51babe2344e9b0ff6629a4f044727728349 Author: Juergen Gross <[email protected]> AuthorDate: Fri, 04 Nov 2022 08:26:58 +01:00 Committer: Borislav Petkov <[email protected]> CommitterDate: Tue, 22 Nov 2022 16:11:57 +01:00
x86/cpu: Remove unneeded 64-bit dependency in arch_enter_from_user_mode()
The check for 64-bit mode when testing X86_FEATURE_XENPV isn't needed, as Xen PV guests are no longer supported in 32-bit mode, see
a13f2ef168cb ("x86/xen: remove 32-bit Xen PV guest support").
While at it switch from boot_cpu_has() to cpu_feature_enabled().
--- arch/x86/include/asm/entry-common.h | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)
arch/x86/include/asm/entry-common.h +2 -2
@@ -24,8 +24,8 @@ static __always_inline void arch_enter_from_user_mode(struct pt_regs *regs)/* * For !SMAP hardware we patch out CLAC on entry. */ -if (boot_cpu_has (X86_FEATURE_SMAP ) || - (IS_ENABLED (CONFIG_64BIT ) &&boot_cpu_has (X86_FEATURE_XENPV ))) +if (cpu_feature_enabled (X86_FEATURE_SMAP ) || +cpu_feature_enabled (X86_FEATURE_XENPV )) mask |=X86_EFLAGS_AC ;WARN_ON_ONCE (flags & mask);
PATCH v2 3/5 x86: drop 32-bit Xen PV guest code in update_task_stack()
In reply to Juergen GrossTesting for Xen PV guest mode in a 32-bit only code section can be dropped, as Xen PV guests are supported in 64-bit mode only.
While at it switch from boot_cpu_has() to cpu_feature_enabled() in the 64-bit part of the code.
--- arch/x86/include/asm/switch_to.h | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-)
arch/x86/include/asm/switch_to.h +2 -5
@@ -66,13 +66,10 @@ static inline void update_task_stack(struct task_struct *task) {/* sp0 always points to the entry trampoline stack, which is constant: */ #ifdef CONFIG_X86_32 -if (static_cpu_has (X86_FEATURE_XENPV )) -load_sp0 (task->thread.sp0); -else -this_cpu_write (cpu_tss_rw.x86_tss.sp1, task->thread.sp0); +this_cpu_write (cpu_tss_rw.x86_tss.sp1, task->thread.sp0);#else /* Xen PV enters the kernel on the thread stack. */ -if (static_cpu_has (X86_FEATURE_XENPV )) +if (cpu_feature_enabled (X86_FEATURE_XENPV ))load_sp0 (task_top_of_stack (task));#endif }
Signature · 1 line
2.35.3
Re: [PATCH v2 3/5] x86: drop 32-bit Xen PV guest code in update_task_stack()
Quoted 5 lines · Juergen Gross
Testing for Xen PV guest mode in a 32-bit only code section can be dropped, as Xen PV guests are supported in 64-bit mode only.
While at it switch from
boot_cpu_has()tocpu_feature_enabled()in the 64-bit part of the code.
[tip: x86/cpu] x86/cpu: Drop 32-bit Xen PV guest code in update_task_stack()
In reply to Juergen GrossThe following commit has been merged into the x86/cpu branch of tip:
The following commit has been merged into the x86/cpu branch of tip:
Commit-ID: dfbd9e4059c4edad4d92ef7f3deb4954f76e4ba0 Gitweb: https://git.kernel.org/tip/dfbd9e4059c4edad4d92ef7f3deb4954f76e4ba0 Author: Juergen Gross <[email protected]> AuthorDate: Fri, 04 Nov 2022 08:26:59 +01:00 Committer: Borislav Petkov <[email protected]> CommitterDate: Tue, 22 Nov 2022 16:14:15 +01:00
x86/cpu: Drop 32-bit Xen PV guest code in update_task_stack()
Testing for Xen PV guest mode in a 32-bit only code section can be dropped, as Xen PV guests are supported in 64-bit mode only.
While at it, switch from boot_cpu_has() to cpu_feature_enabled() in the 64-bit part of the code.
--- arch/x86/include/asm/switch_to.h | 7 ++----- 1 file changed, 2 insertions(+), 5 deletions(-)
arch/x86/include/asm/switch_to.h +2 -5
@@ -66,13 +66,10 @@ static inline void update_task_stack(struct task_struct *task) {/* sp0 always points to the entry trampoline stack, which is constant: */ #ifdef CONFIG_X86_32 -if (static_cpu_has (X86_FEATURE_XENPV )) -load_sp0 (task->thread.sp0); -else -this_cpu_write (cpu_tss_rw.x86_tss.sp1, task->thread.sp0); +this_cpu_write (cpu_tss_rw.x86_tss.sp1, task->thread.sp0);#else /* Xen PV enters the kernel on the thread stack. */ -if (static_cpu_has (X86_FEATURE_XENPV )) +if (cpu_feature_enabled (X86_FEATURE_XENPV ))load_sp0 (task_top_of_stack (task));#endif }
PATCH v2 4/5 x86: remove X86_FEATURE_XENPV usage in setup_cpu_entry_area()
In reply to Juergen GrossTesting of X86_FEATURE_XENPV in setup_cpu_entry_area() can be removed, as this code path is 32-bit only, and Xen PV guests are not supporting 32-bit mode.
---
V2:
- new patch
--- arch/x86/mm/cpu_entry_area.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-)
arch/x86/mm/cpu_entry_area.c +2 -6
@@ -138,17 +138,13 @@ static void __init setup_cpu_entry_area(unsigned int cpu)pgprot_t tss_prot =PAGE_KERNEL_RO ;#else /* -* On native 32-bit systems, the GDT cannot be read-only because +* On 32-bit systems, the GDT cannot be read-only because * our double fault handler uses a task gate, and entering through * a task gate needs to change an available TSS to busy. If the * GDT is read-only, that will triple fault. The TSS cannot be * read-only because the CPU writes to it on task switches. -* -* On Xen PV, the GDT must be read-only because the hypervisor -* requires it. */ -pgprot_t gdt_prot =boot_cpu_has (X86_FEATURE_XENPV ) ? -PAGE_KERNEL_RO :PAGE_KERNEL ; +pgprot_t gdt_prot =PAGE_KERNEL ;pgprot_t tss_prot =PAGE_KERNEL ;#endif
Signature · 1 line
2.35.3
Re: [PATCH v2 4/5] x86: remove X86_FEATURE_XENPV usage in setup_cpu_entry_area()
Quoted 3 lines · Juergen Gross
Testing of
X86_FEATURE_XENPVinsetup_cpu_entry_area()can be removed, as this code path is 32-bit only, and Xen PV guests are not supporting 32-bit mode.
[tip: x86/cpu] x86/cpu: Remove X86_FEATURE_XENPV usage in setup_cpu_entry_area()
In reply to Juergen GrossThe following commit has been merged into the x86/cpu branch of tip:
The following commit has been merged into the x86/cpu branch of tip:
Commit-ID: d76c4f7a610ac56c5b06e34258859945e77d190c Gitweb: https://git.kernel.org/tip/d76c4f7a610ac56c5b06e34258859945e77d190c Author: Juergen Gross <[email protected]> AuthorDate: Fri, 04 Nov 2022 08:27:00 +01:00 Committer: Borislav Petkov <[email protected]> CommitterDate: Tue, 22 Nov 2022 16:16:25 +01:00
x86/cpu: Remove X86_FEATURE_XENPV usage in setup_cpu_entry_area()
Testing of X86_FEATURE_XENPV in setup_cpu_entry_area() can be removed, as this code path is 32-bit only, and Xen PV guests are 64-bit only.
--- arch/x86/mm/cpu_entry_area.c | 8 ++------ 1 file changed, 2 insertions(+), 6 deletions(-)
arch/x86/mm/cpu_entry_area.c +2 -6
@@ -138,17 +138,13 @@ static void __init setup_cpu_entry_area(unsigned int cpu)pgprot_t tss_prot =PAGE_KERNEL_RO ;#else /* -* On native 32-bit systems, the GDT cannot be read-only because +* On 32-bit systems, the GDT cannot be read-only because * our double fault handler uses a task gate, and entering through * a task gate needs to change an available TSS to busy. If the * GDT is read-only, that will triple fault. The TSS cannot be * read-only because the CPU writes to it on task switches. -* -* On Xen PV, the GDT must be read-only because the hypervisor -* requires it. */ -pgprot_t gdt_prot =boot_cpu_has (X86_FEATURE_XENPV ) ? -PAGE_KERNEL_RO :PAGE_KERNEL ; +pgprot_t gdt_prot =PAGE_KERNEL ;pgprot_t tss_prot =PAGE_KERNEL ;#endif
PATCH v2 5/5 x86: switch to cpu_feature_enabled() for X86_FEATURE_XENPV
In reply to Juergen GrossConvert the remaining cases of static_cpu_has(X86_FEATURE_XENPV) and boot_cpu_has(X86_FEATURE_XENPV) to use cpu_feature_enabled(), allowing more efficient code in case the kernel is configured without CONFIG_XEN_PV.
--- arch/x86/kernel/cpu/amd.c | 2 +- arch/x86/kernel/cpu/bugs.c | 2 +- arch/x86/kernel/cpu/hygon.c | 2 +- arch/x86/kernel/process_64.c | 4 ++-- arch/x86/kernel/topology.c | 2 +- 5 files changed, 6 insertions(+), 6 deletions(-)
arch/x86/kernel/cpu/amd.c +1 -1
@@ -985,7 +985,7 @@ static void init_amd(struct cpuinfo_x86 *c)set_cpu_cap (c,X86_FEATURE_3DNOWPREFETCH );/* AMD CPUs don't reset SS attributes on SYSRET, Xen does. */ -if (!cpu_has (c,X86_FEATURE_XENPV )) +if (!cpu_feature_enabled (X86_FEATURE_XENPV ))set_cpu_bug (c,X86_BUG_SYSRET_SS_ATTRS );/*
arch/x86/kernel/cpu/bugs.c +1 -1
@@ -1302,7 +1302,7 @@ static enum spectre_v2_mitigation_cmd __init spectre_v2_parse_cmdline(void)return SPECTRE_V2_CMD_AUTO ; } -if (cmd ==SPECTRE_V2_CMD_IBRS &&boot_cpu_has (X86_FEATURE_XENPV )) { +if (cmd ==SPECTRE_V2_CMD_IBRS &&cpu_feature_enabled (X86_FEATURE_XENPV )) {pr_err ("%s selected but running as XenPV guest. Switching to AUTO select\n" , mitigation_options[i].option);return SPECTRE_V2_CMD_AUTO ;
arch/x86/kernel/cpu/hygon.c +1 -1
@@ -339,7 +339,7 @@ static void init_hygon(struct cpuinfo_x86 *c)set_cpu_cap (c,X86_FEATURE_ARAT );/* Hygon CPUs don't reset SS attributes on SYSRET, Xen does. */ -if (!cpu_has (c,X86_FEATURE_XENPV )) +if (!cpu_feature_enabled (X86_FEATURE_XENPV ))set_cpu_bug (c,X86_BUG_SYSRET_SS_ATTRS );check_null_seg_clears_base (c);
arch/x86/kernel/process_64.c +2 -2
@@ -165,7 +165,7 @@ static noinstr unsigned long __rdgsbase_inactive(void)lockdep_assert_irqs_disabled (); -if (!static_cpu_has (X86_FEATURE_XENPV )) { +if (!cpu_feature_enabled (X86_FEATURE_XENPV )) {native_swapgs (); gsbase =rdgsbase ();native_swapgs ();
@@ -190,7 +190,7 @@ static noinstr void __wrgsbase_inactive(unsigned long gsbase) {lockdep_assert_irqs_disabled (); -if (!static_cpu_has (X86_FEATURE_XENPV )) { +if (!cpu_feature_enabled (X86_FEATURE_XENPV )) {native_swapgs ();wrgsbase (gsbase);native_swapgs ();
arch/x86/kernel/topology.c +1 -1
@@ -106,7 +106,7 @@ int arch_register_cpu(int num)* Xen PV guests don't support CPU0 hotplug at all. */ if (c->x86_vendor !=X86_VENDOR_INTEL || -boot_cpu_has (X86_FEATURE_XENPV )) +cpu_feature_enabled (X86_FEATURE_XENPV )) cpu0_hotpluggable =0 ;/*
Signature · 1 line
2.35.3
Re: [PATCH v2 5/5] x86: switch to cpu_feature_enabled() for X86_FEATURE_XENPV
Quoted 4 lines · Juergen Gross
Convert the remaining cases of
static_cpu_has(X86_FEATURE_XENPV)andboot_cpu_has(X86_FEATURE_XENPV)to usecpu_feature_enabled(), allowing more efficient code in case the kernel is configured withoutCONFIG_XEN_PV.
As with the rest:
Seems like a very straightforward, sane set of cleanups.
[tip: x86/cpu] x86/cpu: Switch to cpu_feature_enabled() for X86_FEATURE_XENPV
In reply to Juergen GrossThe following commit has been merged into the x86/cpu branch of tip:
The following commit has been merged into the x86/cpu branch of tip:
Commit-ID: 6007878a782eb96f50a71c3a06cf3e931cf8aac1 Gitweb: https://git.kernel.org/tip/6007878a782eb96f50a71c3a06cf3e931cf8aac1 Author: Juergen Gross <[email protected]> AuthorDate: Fri, 04 Nov 2022 08:27:01 +01:00 Committer: Borislav Petkov <[email protected]> CommitterDate: Tue, 22 Nov 2022 16:18:19 +01:00
x86/cpu: Switch to cpu_feature_enabled() for X86_FEATURE_XENPV
Convert the remaining cases of static_cpu_has(X86_FEATURE_XENPV) and boot_cpu_has(X86_FEATURE_XENPV) to use cpu_feature_enabled(), allowing more efficient code in case the kernel is configured without CONFIG_XEN_PV.
--- arch/x86/kernel/cpu/amd.c | 2 +- arch/x86/kernel/cpu/bugs.c | 2 +- arch/x86/kernel/cpu/hygon.c | 2 +- arch/x86/kernel/process_64.c | 4 ++-- arch/x86/kernel/topology.c | 2 +- 5 files changed, 6 insertions(+), 6 deletions(-)
arch/x86/kernel/cpu/amd.c +1 -1
@@ -985,7 +985,7 @@ static void init_amd(struct cpuinfo_x86 *c)set_cpu_cap (c,X86_FEATURE_3DNOWPREFETCH );/* AMD CPUs don't reset SS attributes on SYSRET, Xen does. */ -if (!cpu_has (c,X86_FEATURE_XENPV )) +if (!cpu_feature_enabled (X86_FEATURE_XENPV ))set_cpu_bug (c,X86_BUG_SYSRET_SS_ATTRS );/*
arch/x86/kernel/cpu/bugs.c +1 -1
@@ -1302,7 +1302,7 @@ static enum spectre_v2_mitigation_cmd __init spectre_v2_parse_cmdline(void)return SPECTRE_V2_CMD_AUTO ; } -if (cmd ==SPECTRE_V2_CMD_IBRS &&boot_cpu_has (X86_FEATURE_XENPV )) { +if (cmd ==SPECTRE_V2_CMD_IBRS &&cpu_feature_enabled (X86_FEATURE_XENPV )) {pr_err ("%s selected but running as XenPV guest. Switching to AUTO select\n" , mitigation_options[i].option);return SPECTRE_V2_CMD_AUTO ;
arch/x86/kernel/cpu/hygon.c +1 -1
@@ -339,7 +339,7 @@ static void init_hygon(struct cpuinfo_x86 *c)set_cpu_cap (c,X86_FEATURE_ARAT );/* Hygon CPUs don't reset SS attributes on SYSRET, Xen does. */ -if (!cpu_has (c,X86_FEATURE_XENPV )) +if (!cpu_feature_enabled (X86_FEATURE_XENPV ))set_cpu_bug (c,X86_BUG_SYSRET_SS_ATTRS );check_null_seg_clears_base (c);
arch/x86/kernel/process_64.c +2 -2
@@ -165,7 +165,7 @@ static noinstr unsigned long __rdgsbase_inactive(void)lockdep_assert_irqs_disabled (); -if (!static_cpu_has (X86_FEATURE_XENPV )) { +if (!cpu_feature_enabled (X86_FEATURE_XENPV )) {native_swapgs (); gsbase =rdgsbase ();native_swapgs ();
@@ -190,7 +190,7 @@ static noinstr void __wrgsbase_inactive(unsigned long gsbase) {lockdep_assert_irqs_disabled (); -if (!static_cpu_has (X86_FEATURE_XENPV )) { +if (!cpu_feature_enabled (X86_FEATURE_XENPV )) {native_swapgs ();wrgsbase (gsbase);native_swapgs ();
arch/x86/kernel/topology.c +1 -1
@@ -106,7 +106,7 @@ int arch_register_cpu(int num)* Xen PV guests don't support CPU0 hotplug at all. */ if (c->x86_vendor !=X86_VENDOR_INTEL || -boot_cpu_has (X86_FEATURE_XENPV )) +cpu_feature_enabled (X86_FEATURE_XENPV )) cpu0_hotpluggable =0 ;/*
Quoted 14 lines · Juergen Gross
Make especially kernels without
CONFIG_XEN_PVmore efficient by usingcpu_feature_enabled(X86_FEATURE_XENPV)instead ofboot_cpu_has()and friends.Changes in V2:
- new patch 4Juergen Gross (5):
x86: addX86_FEATURE_XENPVtodisabled-features.h
x86: remove unneeded 64-bit dependency inarch_enter_from_user_mode()
x86: drop 32-bit Xen PV guest code inupdate_task_stack()
x86: removeX86_FEATURE_XENPVusage insetup_cpu_entry_area()
x86: switch tocpu_feature_enabled()forX86_FEATURE_XENPV
Quoted 11 lines
arch/x86/include/asm/disabled-features.h | 8 +++++++- arch/x86/include/asm/entry-common.h | 4 ++-- arch/x86/include/asm/switch_to.h | 7 ++----- arch/x86/kernel/cpu/amd.c | 2 +- arch/x86/kernel/cpu/bugs.c | 2 +- arch/x86/kernel/cpu/hygon.c | 2 +- arch/x86/kernel/process_64.c | 4 ++-- arch/x86/kernel/topology.c | 2 +- arch/x86/mm/cpu_entry_area.c | 8 ++------ 9 files changed, 19 insertions(+), 20 deletions(-)
The patches have all an "Ack" by Dave. I think this series should go in via the tip tree, no?
Juergen