netconfig: add ACD client for static configuration
PATCH v2 1/2 netconfig: add ACD client for static configuration
When the IP is configured to be static we can now use ACD in order to check that the IP is available and not already in use. If a conflict is found netconfig will be reset and no IP will be set on the interface. The ACD client is left with the default 'defend once' policy, and probes are not turned off. This will increase connection time, but for static IP's it is the best approach.
--- src/netconfig.c | 94 +++++++++++++++++++++++++++++++++++++++---------- 1 file changed, 76 insertions(+), 18 deletions(-)
v2:
* Added netconfig_reset_v4 to allow a failed ACD attempt to reset only the IPv4 data.
* Distinguish between CONFLICT/LOST events. For conflicts no IP was ever set in the kernel, so we can just clean up the rtnl address directly. For LOST events an address was set, so it would need to be deleted.
src/netconfig.c +76 -18
@@ -64,6 +64,8 @@ struct netconfig {void *user_data;struct resolve *resolve; + +struct l_acd *acd; };static struct l_netlink *rtnl;
@@ -804,15 +806,87 @@ static void netconfig_dhcp6_event_handler(struct l_dhcp6_client *client, } } +static void netconfig_reset_v4 (struct netconfig *netconfig) +{ +if (netconfig->rtm_protocol) { +if (netconfig->v4_address) { +L_WARN_ON (!l_rtnl_ifaddr_delete (rtnl, + netconfig->ifindex, + netconfig->v4_address, + netconfig_ifaddr_del_cmd_cb, + netconfig,NULL )); +l_rtnl_address_free (netconfig->v4_address); + netconfig->v4_address =NULL ; + } + +l_strfreev (netconfig->dns4_overrides); + netconfig->dns4_overrides =NULL ; + +l_dhcp_client_stop (netconfig->dhcp_client); + netconfig->rtm_protocol =0 ; + } +} + +static void netconfig_ipv4_acd_event (enum l_acd_event event,void *user_data) +{ +struct netconfig *netconfig = user_data; + +switch (event) { +case L_ACD_EVENT_AVAILABLE : +L_WARN_ON (!l_rtnl_ifaddr_add (rtnl, netconfig->ifindex, + netconfig->v4_address, + netconfig_ipv4_ifaddr_add_cmd_cb, + netconfig,NULL )); +return ; +case L_ACD_EVENT_CONFLICT : +/* +* Conflict found, no IP was actually set so just free/unset +* anything we set prior to starting ACD. +*/ +l_error ("netconfig: statically configured address conflict!" ); +l_rtnl_address_free (netconfig->v4_address); + netconfig->v4_address =NULL ; + netconfig->rtm_protocol =0 ; +break ; +case L_ACD_EVENT_LOST : +/* +* Set IP but lost it some time after. Full (IPv4) reset in this +* case. +*/ +l_error ("netconfig: statically configured address was lost" ); +netconfig_reset_v4 (netconfig); +break ; + } +} +static void netconfig_ipv4_select_and_install (struct netconfig *netconfig) { netconfig->v4_address =netconfig_get_static4_address (netconfig);if (netconfig->v4_address) { +char ip[INET6_ADDRSTRLEN ]; + netconfig->rtm_protocol =RTPROT_STATIC ; -L_WARN_ON (!l_rtnl_ifaddr_add (rtnl, netconfig->ifindex, + netconfig->acd =l_acd_new (netconfig->ifindex); +l_acd_set_event_handler (netconfig->acd, + netconfig_ipv4_acd_event, netconfig, +NULL ); +if (getenv ("IWD_ACD_DEBUG" )) +l_acd_set_debug (netconfig->acd, do_debug, +"[ACD] " ,NULL ); + +l_rtnl_address_get_address (netconfig->v4_address, ip); + +if (!l_acd_start (netconfig->acd, ip)) { +l_error ("failed to start ACD, continuing anyways" ); +l_acd_destroy (netconfig->acd); + netconfig->acd =NULL ; + +L_WARN_ON (!l_rtnl_ifaddr_add (rtnl, netconfig->ifindex, netconfig->v4_address, netconfig_ipv4_ifaddr_add_cmd_cb, netconfig,NULL )); + } +return ; }
@@ -955,23 +1029,7 @@ bool netconfig_reset(struct netconfig *netconfig)if (netconfig->rtm_protocol || netconfig->rtm_v6_protocol)resolve_revert (netconfig->resolve); -if (netconfig->rtm_protocol) { -if (netconfig->v4_address) { -L_WARN_ON (!l_rtnl_ifaddr_delete (rtnl, - netconfig->ifindex, - netconfig->v4_address, - netconfig_ifaddr_del_cmd_cb, - netconfig,NULL )); -l_rtnl_address_free (netconfig->v4_address); - netconfig->v4_address =NULL ; - } - -l_strfreev (netconfig->dns4_overrides); - netconfig->dns4_overrides =NULL ; - -l_dhcp_client_stop (netconfig->dhcp_client); - netconfig->rtm_protocol =0 ; - } +netconfig_reset_v4 (netconfig);if (netconfig->rtm_v6_protocol) {l_strfreev (netconfig->dns6_overrides);
Signature · 1 line
2.26.2
PATCH v2 2/2 auto-t: add static netconfig test
Tests netconfig with a static configuration, as well as tests ACD functionality.
The test has two IWD radios which will eventually use the same IP. One is configured statically, one will receive the IP via DHCP. The static client sets its IP first and begins using it. Then the DHCP client is started. Since ACD in a DHCP client is configured to use its address indefinitely, the static client *should* give up its address.
--- autotests/testNetconfig/connection_test.py | 10 +- autotests/testNetconfig/hw.conf | 7 +- autotests/testNetconfig/static_test.py | 105 +++++++++++++++++++ autotests/testNetconfig/storage/ssidTKIP.psk | 3 + 4 files changed, 121 insertions(+), 4 deletions(-) create mode 100644 autotests/testNetconfig/static_test.py create mode 100644 autotests/testNetconfig/storage/ssidTKIP.psk
autotests/testNetconfig/connection_test.py +7 -3
@@ -11,11 +11,12 @@ from iwd import NetworkType from hostapd import HostapdCLI import testutil from config import ctx +import os class Test(unittest.TestCase): def test_connection_success(self): - wd = IWD() + wd = IWD(True) psk_agent = PSKAgent("secret123") wd.register_psk_agent(psk_agent)
@@ -62,12 +63,15 @@ class Test(unittest.TestCase): ctx.start_process(['ifconfig', hapd.ifname, '192.168.1.1', 'netmask', '255.255.255.0'], wait=True) ctx.start_process(['touch', '/tmp/dhcpd.leases'], wait=True) - ctx.start_process(['dhcpd', '-cf', '/tmp/dhcpd.conf', '-lf', '/tmp/dhcpd.leases', - hapd.ifname]) + cls.dhcpd_pid = ctx.start_process(['dhcpd', '-f', '-cf', '/tmp/dhcpd.conf', + '-lf', '/tmp/dhcpd.leases', + hapd.ifname]) @classmethod def tearDownClass(cls): IWD.clear_storage() + cls.dhcpd_pid.kill() + os.system('rm -rf /tmp/dhcpd.leases') if __name__ == '__main__': unittest.main(exit=True)
autotests/testNetconfig/hw.conf +6 -1
@@ -1,6 +1,11 @@ [SETUP] -num_radios=2 +num_radios=3 max_test_exec_interval_sec=40 +start_iwd=0 +hwsim_medium=no [HOSTAPD] rad0=ssidTKIP.conf + +[NameSpaces] +ns0=rad2
autotests/testNetconfig/static_test.py new file +105 -0
105 lines not on this page · raw message
autotests/testNetconfig/storage/ssidTKIP.psk new file +3 -0
@@ -0,0 +1,3 @@ +[IPv4] +Address=192.168.1.10 +Gateway=192.168.1.1
Signature · 1 line
2.26.2
Hi James,
Quoted 11 lines · James Prestwood
When the IP is configured to be static we can now use ACD in order to check that the IP is available and not already in use. If a conflict is found netconfig will be reset and no IP will be set on the interface. The ACD client is left with the default 'defend once' policy, and probes are not turned off. This will increase connection time, but for static IP's it is the best approach.
--- src/netconfig.c | 94 +++++++++++++++++++++++++++++++++++++++---------- 1 file changed, 76 insertions(+), 18 deletions(-)
Quoted 8 lines
v2:
* Addednetconfig_reset_v4to allow a failed ACD attempt to reset only the IPv4 data.
* Distinguish between CONFLICT/LOST events. For conflicts no IP was ever set in the kernel, so we can just clean up the rtnl address directly. For LOST events an address was set, so it would need to be deleted.
Both applied, thanks
Regards,
-Denis