Skip to contentSkip to conversation

tools/hv: fcopy: Fix incorrect file path conversion

PATCH Applied [email protected] 3 participants 4 messages Jun 28, 2025 – Jul 9, 2025

Subsystems (2)
lore
Share & tools
lore
#0 lore raw

v5 cover tools/hv: fcopy: Fix incorrect file path conversion

From: Yasumasa Suenaga <[email protected]>

Hi Naman,

Thanks a lot for your advise!
I updated commit message. This version does not have any code changes from v4.

I hope this patch would go well.

Best regards,

Yasumasa

Yasumasa Suenaga (1):
tools/hv: fcopy: Fix incorrect file path conversion

 tools/hv/hv_fcopy_uio_daemon.c | 37 +++++++++++++---------------------
 1 file changed, 14 insertions(+), 23 deletions(-)
Signature · 1 line
2.49.0
#1 lore raw

PATCH v5 1/1 tools/hv: fcopy: Fix incorrect file path conversion

From: Yasumasa Suenaga <[email protected]>

The hv_fcopy_uio_daemon fails to correctly handle file copy requests from Windows hosts (e.g. via Copy-VMFile) due to wchar_t size differences between Windows and Linux. On Linux, wchar_t is 32 bit, whereas Windows uses 16 bit wide characters.

Fix this by ensuring that file transfers from host to Linux guest succeed with correctly decoded file names and paths.

- Treats file name and path as __u16 arrays, not wchar_t*.
- Allocates fixed-size buffers (W_MAX_PATH) for converted strings instead of using malloc.
- Adds a check for target path length to prevent snprintf() buffer overflow.

Fixes 82b0945ce2c2 ("tools: hv: Add new fcopy application based on uio driver")
---
 tools/hv/hv_fcopy_uio_daemon.c | 37 +++++++++++++---------------------
 1 file changed, 14 insertions(+), 23 deletions(-)
tools/hv/hv_fcopy_uio_daemon.c +14 -23
index 0198321d1..4b09ed6b6 100644
@@ -62,8 +62,11 @@ static int hv_fcopy_create_file(char *file_name, char *path_name, __u32 flags)
 
 	filesize = 0;
 	p = path_name;
-	snprintf(target_fname, sizeof(target_fname), "%s/%s",
-		 path_name, file_name);
+	if (snprintf(target_fname, sizeof(target_fname), "%s/%s",
+		     path_name, file_name) >= sizeof(target_fname)) {
+		syslog(LOG_ERR, "target file name is too long: %s/%s", path_name, file_name);
+		goto done;
+	}
 
 	/*
 	 * Check to see if the path is already in place; if not,
@@ -270,7 +273,7 @@ static void wcstoutf8(char *dest, const __u16 *src, size_t dest_size)
 {
 	size_t len = 0;
 
-	while (len < dest_size) {
+	while (len < dest_size && *src) {
 		if (src[len] < 0x80)
 			dest[len++] = (char)(*src++);
 		else
@@ -282,27 +285,15 @@ static void wcstoutf8(char *dest, const __u16 *src, size_t dest_size)
 
 static int hv_fcopy_start(struct hv_start_fcopy *smsg_in)
 {
-	setlocale(LC_ALL, "en_US.utf8");
-	size_t file_size, path_size;
-	char *file_name, *path_name;
-	char *in_file_name = (char *)smsg_in->file_name;
-	char *in_path_name = (char *)smsg_in->path_name;
-
-	file_size = wcstombs(NULL, (const wchar_t *restrict)in_file_name, 0) + 1;
-	path_size = wcstombs(NULL, (const wchar_t *restrict)in_path_name, 0) + 1;
-
-	file_name = (char *)malloc(file_size * sizeof(char));
-	path_name = (char *)malloc(path_size * sizeof(char));
-
-	if (!file_name || !path_name) {
-		free(file_name);
-		free(path_name);
-		syslog(LOG_ERR, "Can't allocate memory for file name and/or path name");
-		return HV_E_FAIL;
-	}
+	/*
+	 * file_name and path_name should have same length with appropriate
+	 * member of hv_start_fcopy.
+	 */
+	char file_name[W_MAX_PATH], path_name[W_MAX_PATH];
 
-	wcstoutf8(file_name, (__u16 *)in_file_name, file_size);
-	wcstoutf8(path_name, (__u16 *)in_path_name, path_size);
+	setlocale(LC_ALL, "en_US.utf8");
+	wcstoutf8(file_name, smsg_in->file_name, W_MAX_PATH - 1);
+	wcstoutf8(path_name, smsg_in->path_name, W_MAX_PATH - 1);
 
 	return hv_fcopy_create_file(file_name, path_name, smsg_in->copy_flags);
 }
Signature · 1 line
2.49.0
Reviewed-by on v5 1/1
#2 lore raw
Quoted 75 lines · On 6/28/2025 7:52 AM, [email protected] wrote:

From: Yasumasa Suenaga <[email protected]>

The hv_fcopy_uio_daemon fails to correctly handle file copy requests from Windows hosts (e.g. via Copy-VMFile) due to wchar_t size differences between Windows and Linux. On Linux, wchar_t is 32 bit, whereas Windows uses 16 bit wide characters.

Fix this by ensuring that file transfers from host to Linux guest succeed with correctly decoded file names and paths.

- Treats file name and path as __u16 arrays, not wchar_t*.
- Allocates fixed-size buffers (W_MAX_PATH) for converted strings instead of using malloc.
- Adds a check for target path length to prevent snprintf() buffer overflow.

Fixes 82b0945ce2c2 ("tools: hv: Add new fcopy application based on uio driver")
---
  tools/hv/hv_fcopy_uio_daemon.c | 37 +++++++++++++---------------------
  1 file changed, 14 insertions(+), 23 deletions(-)
tools/hv/hv_fcopy_uio_daemon.c +10 -21
index 0198321d1..4b09ed6b6 100644
@@ -62,8 +62,11 @@ static int hv_fcopy_create_file(char *file_name, char *path_name, __u32 flags)
 
  	filesize = 0;
  	p = path_name;
-	snprintf(target_fname, sizeof(target_fname), "%s/%s",
-		 path_name, file_name);
+	if (snprintf(target_fname, sizeof(target_fname), "%s/%s",
+		     path_name, file_name) >= sizeof(target_fname)) {
+		syslog(LOG_ERR, "target file name is too long: %s/%s", path_name, file_name);
+		goto done;
+	}
 
  	/*
  	 * Check to see if the path is already in place; if not,
@@ -270,7 +273,7 @@ static void wcstoutf8(char *dest, const __u16 *src, size_t dest_size)
  {
  	size_t len = 0;
 
-	while (len < dest_size) {
+	while (len < dest_size && *src) {
  		if (src[len] < 0x80)
  			dest[len++] = (char)(*src++);
  		else
@@ -282,27 +285,15 @@ static void wcstoutf8(char *dest, const __u16 *src, size_t dest_size)
 
  static int hv_fcopy_start(struct hv_start_fcopy *smsg_in)
  {
-	setlocale(LC_ALL, "en_US.utf8");
-	size_t file_size, path_size;
-	char *file_name, *path_name;
-	char *in_file_name = (char *)smsg_in->file_name;
-	char *in_path_name = (char *)smsg_in->path_name;
-
-	file_size = wcstombs(NULL, (const wchar_t *restrict)in_file_name, 0) + 1;
-	path_size = wcstombs(NULL, (const wchar_t *restrict)in_path_name, 0) + 1;
-
-	file_name = (char *)malloc(file_size * sizeof(char));
-	path_name = (char *)malloc(path_size * sizeof(char));
-
-	if (!file_name || !path_name) {
-		free(file_name);
-		free(path_name);
-		syslog(LOG_ERR, "Can't allocate memory for file name and/or path name");
-		return HV_E_FAIL;
-	}
+	/*
+	 * file_name and path_name should have same length with appropriate
+	 * member of hv_start_fcopy.
+	 */

tools/hv/hv_fcopy_uio_daemon.c static void wcstoutf8(char *dest, const __u16 *src, size_t dest_size) · line 299

Quoted 10 lines
tools/hv/hv_fcopy_uio_daemon.c +4 -2
+	char file_name[W_MAX_PATH], path_name[W_MAX_PATH];
 
-	wcstoutf8(file_name, (__u16 *)in_file_name, file_size);
-	wcstoutf8(path_name, (__u16 *)in_path_name, path_size);
+	setlocale(LC_ALL, "en_US.utf8");
+	wcstoutf8(file_name, smsg_in->file_name, W_MAX_PATH - 1);
+	wcstoutf8(path_name, smsg_in->path_name, W_MAX_PATH - 1);
 
  	return hv_fcopy_create_file(file_name, path_name, smsg_in->copy_flags);
  }

LGTM. FYI, Fcopy daemon is broken on some systems currently. Below change should fix it:

https://lore.kernel.org/all/[email protected]/

maintainer Applied
#3 lore raw
Quoted 21 lines · Naman Jain
Quoted 18 lines · On 6/28/2025 7:52 AM, [email protected] wrote:

From: Yasumasa Suenaga <[email protected]>

The hv_fcopy_uio_daemon fails to correctly handle file copy requests from Windows hosts (e.g. via Copy-VMFile) due to wchar_t size differences between Windows and Linux. On Linux, wchar_t is 32 bit, whereas Windows uses 16 bit wide characters.

Fix this by ensuring that file transfers from host to Linux guest succeed with correctly decoded file names and paths.

- Treats file name and path as __u16 arrays, not wchar_t*.
- Allocates fixed-size buffers (W_MAX_PATH) for converted strings instead of using malloc.
- Adds a check for target path length to prevent snprintf() buffer overflow.

Fixes 82b0945ce2c2 ("tools: hv: Add new fcopy application based on uio driver")

[...]

Quoted 1 line

Applied to hyperv-fixes. Thank you both for the patch and the review!