Device tree based NUMA support for Arm - Part#1
v4 cover Device tree based NUMA support for Arm - Part#1
(The Arm device tree based NUMA support patch set contains 35 patches. In order to make stuff easier for reviewers, I split them into 3 parts:
1. Preparation. I have re-sorted the patch series. And moved independent patches to the head of the series.
2. Move generically usable code from x86 to common.
3. Add new code to support Arm.
This series only contains the first part patches.)
Xen memory allocation and scheduler modules are NUMA aware. But actually, on x86 has implemented the architecture APIs to support NUMA. Arm was providing a set of fake architecture APIs to make it compatible with NUMA awared memory allocation and scheduler.
Arm system was working well as a single node NUMA system with these fake APIs, because we didn't have multiple nodes NUMA system on Arm. But in recent years, more and more Arm devices support multiple nodes NUMA system.
So now we have a new problem. When Xen is running on these Arm devices, Xen still treat them as single node SMP systems. The NUMA affinity capability of Xen memory allocation and scheduler becomes meaningless. Because they rely on input data that does not reflect real NUMA layout.
Xen still think the access time for all of the memory is the same for all CPUs. However, Xen may allocate memory to a VM from different NUMA nodes with different access speeds. This difference can be amplified in workloads inside VM, causing performance instability and timeouts.
So in this patch series, we implement a set of NUMA API to use device tree to describe the NUMA layout. We reuse most of the code of x86 NUMA to create and maintain the mapping between memory and CPU, create the matrix between any two NUMA nodes. Except ACPI and some x86 specified code, we have moved other code to common. In next stage, when we implement ACPI based NUMA for Arm64, we may move the ACPI NUMA code to common too, but in current stage, we keep it as x86 only.
This patch serires has been tested and booted well on one Arm64 NUMA machine and one HPE x86 NUMA machine.
---
Part1 v3->v4:
1. Add indent to make ln and test to be aligned in EFI common makefile.
2. Drop "ERR" prefix for node conflict check enumeration, and remove init value.
3. Use "switch case" for enumeration, and add "default:"
4. Use "PXM" in log messages.
5. Use unsigned int for node memory block id.
6. Fix some code-style comments.
7. Use "nd->end" in node range expansion check.
Part1 v2->v3:
1. Rework EFI stub patch:
1.1. Add existed file check, if exists a regular stub files,
the common/stub files' links will be ignored.
1.2. Keep stub.c in x86/efi to include common/efi/stub.c 1.3. Restore efi_compat_xxx stub functions to x86/efi.c.
Other architectures will not use efi_compat_xxx.
1.4. Remove ARM_EFI dependency from ARM_64.
1.5. Add comment for adding stub.o to EFIOBJ-y. 1.6. Merge patch#2 and patch#3 to one patch.
2. Rename arch_have_default_dmazone to arch_want_default_dmazone
3. Use uint64_t for size in acpi_scan_nodes, make it be consistent with numa_emulation.
4. Merge the interleaves checking code from a separate function to conflicting_memblks.
5. Use INFO level for node's without memory log message.
6. Move "xen/x86: Use ASSERT instead of VIRTUAL_BUG_ON for phys_to_nid" to part#2.
Part1 v1->v2:
1. Move independent patches from later to early of this series.
2. Drop the copy of EFI stub.c from Arm. Share common codes of x86 EFI stub for Arm.
3. Use CONFIG_ARM_EFI to replace CONFIG_EFI and remove help text and make CONFIG_ARM_EFI invisible.
4. Use ASSERT to replace VIRTUAL_BUG_ON in phys_to_nid.
5. Move MAX_NUMNODES from xen/numa.h to asm/numa.h for x86.
6. Extend the description of Arm's workaround for reserve DMA allocations to avoid the same discussion every time for arch_have_default_dmazone.
7. Update commit messages.
Wei Chen (8):
xen: reuse x86 EFI stub functions for Arm
xen/arm: Keep memory nodes in device tree when Xen boots from EFI
xen: introduce an arch helper for default dma zone status
xen: decouple NUMA from ACPI in Kconfig
xen/arm: use !CONFIG_NUMA to keep fake NUMA API xen/x86: use paddr_t for addresses in NUMA node structure xen/x86: add detection of memory interleaves for different nodes xen/x86: use INFO level for node's without memory log message
xen/arch/arm/Kconfig | 4 + xen/arch/arm/Makefile | 2 +- xen/arch/arm/bootfdt.c | 8 +- xen/arch/arm/efi/Makefile | 8 ++ xen/arch/arm/efi/efi-boot.h | 25 ----- xen/arch/arm/include/asm/numa.h | 6 ++ xen/arch/x86/Kconfig | 2 +- xen/arch/x86/efi/stub.c | 32 +------ xen/arch/x86/include/asm/config.h | 1 - xen/arch/x86/include/asm/numa.h | 9 +- xen/arch/x86/numa.c | 32 +++---- xen/arch/x86/srat.c | 154 ++++++++++++++++++++++-------- xen/common/Kconfig | 3 + xen/common/efi/efi-common.mk | 3 +- xen/common/efi/stub.c | 32 +++++++ xen/common/page_alloc.c | 2 +- xen/drivers/acpi/Kconfig | 3 +- xen/drivers/acpi/Makefile | 2 +- 18 files changed, 201 insertions(+), 127 deletions(-) create mode 100644 xen/common/efi/stub.c
Signature · 1 line
2.25.1
PATCH v4 1/8 xen: reuse x86 EFI stub functions for Arm
x86 is using compiler feature testing to decide EFI build enable or not. When EFI build is disabled, x86 will use an efi/stub.c file to replace efi/runtime.c for build objects. Following this idea, we introduce a stub file for Arm, but use CONFIG_ARM_EFI to decide EFI build enable or not.
And the most functions in x86 EFI stub.c can be reused for other architectures, like Arm. So we move them to common and keep the x86 specific function in x86/efi/stub.c.
To avoid the symbol link conflict error when linking common stub files to x86/efi. We add a regular file check in efi stub files' link script. Depends on this check we can bypass the link behaviors for existed stub files in x86/efi.
As there is no Arm specific EFI stub function for Arm in current stage, Arm still can use the existed symbol link method for EFI stub files.
Change-Id: Idf19db1ada609d05fc0c0c3b0e1e8687c9d6ac71
Issue-Id: SCM-2240
---
v3 -> v4:
1. Add indent to make ln and test to be aligned.
v2 -> v3:
1. Add existed file check, if a regular stub files, the common/stub files' link will be ignored.
2. Keep stub.c in x86/efi to include common/efi/stub.c
3. Restore efi_compat_xxx stub functions to x86/efi.c. Other architectures will not use efi_compat_xxx.
4. Remove ARM_EFI dependency from ARM_64.
5. Add comment for adding stub.o to EFIOBJ-y.
6. Merge patch#2 and patch#3 to one patch.
v1 -> v2:
1. Drop the copy of stub.c from Arm EFI.
2. Share common codes of x86 EFI stub for other architectures.
3. Use CONFIG_ARM_EFI to replace CONFIG_EFI
4. Remove help text and make CONFIG_ARM_EFI invisible.
5. Merge one following patch:
xen/arm: introduce a stub file for non-EFI architectures
6. Use the common stub.c instead of creating new one.
--- xen/arch/arm/Kconfig | 4 ++++ xen/arch/arm/Makefile | 2 +- xen/arch/arm/efi/Makefile | 8 ++++++++ xen/arch/x86/efi/stub.c | 32 +------------------------------- xen/common/efi/efi-common.mk | 3 ++- xen/common/efi/stub.c | 32 ++++++++++++++++++++++++++++++++ 6 files changed, 48 insertions(+), 33 deletions(-) create mode 100644 xen/common/efi/stub.c
xen/arch/arm/Kconfig +4 -0
@@ -6,6 +6,7 @@ config ARM_64 def_bool y depends on !ARM_32 select 64BIT + select ARM_EFI select HAS_FAST_MULTIPLY config ARM
@@ -33,6 +34,9 @@ config ACPI Advanced Configuration and Power Interface (ACPI) support for Xen is an alternative to device tree on ARM64. +config ARM_EFI + bool + config GICV3 bool "GICv3 driver" depends on ARM_64 && !NEW_VGIC
xen/arch/arm/Makefile +1 -1
@@ -1,6 +1,5 @@ obj-$(CONFIG_ARM_32) += arm32/ obj-$(CONFIG_ARM_64) += arm64/ -obj-$(CONFIG_ARM_64) += efi/ obj-$(CONFIG_ACPI) += acpi/ obj-$(CONFIG_HAS_PCI) += pci/ ifneq ($(CONFIG_NO_PLAT),y)
@@ -20,6 +19,7 @@ obj-y += domain.o obj-y += domain_build.init.o obj-y += domctl.o obj-$(CONFIG_EARLY_PRINTK) += early_printk.o +obj-y += efi/ obj-y += gic.o obj-y += gic-v2.o obj-$(CONFIG_GICV3) += gic-v3.o
xen/arch/arm/efi/Makefile +8 -0
@@ -1,4 +1,12 @@ include $(srctree)/common/efi/efi-common.mk +ifeq ($(CONFIG_ARM_EFI),y) obj-y += $(EFIOBJ-y) obj-$(CONFIG_ACPI) += efi-dom0.init.o +else +# Add stub.o to EFIOBJ-y to re-use the clean-files in +# efi-common.mk. Otherwise the link of stub.c in arm/efi +# will not be cleaned in "make clean". +EFIOBJ-y += stub.o +obj-y += stub.o +endif
xen/arch/x86/efi/stub.c +1 -31
@@ -1,7 +1,5 @@#include <xen/efi.h> -#include <xen/errno.h> #include <xen/init.h> -#include <xen/lib.h> #include <asm/asm_defns.h> #include <asm/efibind.h> #include <asm/page.h>
@@ -10,6 +8,7 @@#include <efi/eficon.h> #include <efi/efidevp.h> #include <efi/efiapi.h> +#include "../../../common/efi/stub.c" /* * Here we are in EFI stub. EFI calls are not supported due to lack
@@ -45,11 +44,6 @@ void __init noreturn efi_multiboot2(EFI_HANDLE ImageHandle,unreachable (); } -bool efi_enabled (unsigned int feature) -{ -return false; -} -void __init efi_init_memory (void ) { }bool efi_boot_mem_unused (unsigned long *start,unsigned long *end)
@@ -62,32 +56,8 @@ bool efi_boot_mem_unused(unsigned long *start, unsigned long *end)void efi_update_l4_pgtable (unsigned int l4idx,l4_pgentry_t l4e) { } -bool efi_rs_using_pgtables (void ) -{ -return false; -} - -unsigned long efi_get_time (void ) -{ -BUG (); -return 0 ; -} - -void efi_halt_system (void ) { } -void efi_reset_system (bool warm) { } - -int efi_get_info (uint32_t idx,union xenpf_efi_info *info) -{ -return -ENOSYS ; -} -int efi_compat_get_info (uint32_t idx,union compat_pf_efi_info *) __attribute__((__alias__ ("efi_get_info" ))); -int efi_runtime_call (struct xenpf_efi_runtime_call *op) -{ -return -ENOSYS ; -} -int efi_compat_runtime_call (struct compat_pf_efi_runtime_call *) __attribute__((__alias__ ("efi_runtime_call" )));
xen/common/efi/efi-common.mk +2 -1
@@ -9,7 +9,8 @@ CFLAGS-y += -iquote $(srcdir) # e.g.: It transforms "dir/foo/bar" into successively # "dir foo bar", ".. .. ..", "../../.." $(obj)/%.c: $(srctree)/common/efi/%.c FORCE - $(Q)ln -nfs $(subst $(space),/,$(patsubst %,..,$(subst /, ,$(obj))))/source/common/efi/$(<F) $@ + $(Q)test -f $@ || \ + ln -nfs $(subst $(space),/,$(patsubst %,..,$(subst /, ,$(obj))))/source/common/efi/$(<F) $@ clean-files += $(patsubst %.o, %.c, $(EFIOBJ-y:.init.o=.o) $(EFIOBJ-))
xen/common/efi/stub.c new file +32 -0
@@ -0,0 +1,32 @@ +#include <xen/efi.h> +#include <xen/errno.h> +#include <xen/lib.h> + +bool efi_enabled (unsigned int feature) +{ +return false; +} + +bool efi_rs_using_pgtables (void ) +{ +return false; +} + +unsigned long efi_get_time (void ) +{ +BUG (); +return 0 ; +} + +void efi_halt_system (void ) { } +void efi_reset_system (bool warm) { } + +int efi_get_info (uint32_t idx,union xenpf_efi_info *info) +{ +return -ENOSYS ; +} + +int efi_runtime_call (struct xenpf_efi_runtime_call *op) +{ +return -ENOSYS ; +}
Signature · 1 line
2.25.1
Re: [PATCH v4 1/8] xen: reuse x86 EFI stub functions for Arm
Quoted 15 lines · Wei Chen
x86 is using compiler feature testing to decide EFI build enable or not. When EFI build is disabled, x86 will use an
efi/stub.cfile to replaceefi/runtime.cfor build objects. Following this idea, we introduce a stub file for Arm, but useCONFIG_ARM_EFIto decide EFI build enable or not.And the most functions in x86 EFI
stub.ccan be reused for other architectures, like Arm. So we move them to common and keep the x86 specific function inx86/efi/stub.c.To avoid the symbol link conflict error when linking common stub files to x86/efi. We add a regular file check in efi stub files' link script. Depends on this check we can bypass the link behaviors for existed stub files in x86/efi.
Quoted 6 lines
As there is no Arm specific EFI stub function for Arm in current stage, Arm still can use the existed symbol link method for EFI stub files.
Change-Id: Idf19db1ada609d05fc0c0c3b0e1e8687c9d6ac71
Issue-Id: SCM-2240
I don't think these two lines belong in an upstream submission (I checked patch 2 and at least there they are two similar lines).
Quoted 2 lines
Signed-off-by Wei Chen <[email protected]>Tested-by Jiamei Xie <[email protected]>
While I'm not really happy with the Arm side, it's only the other parts which this is applicable to anyway (with the stray tags dropped):
Jan
RE: [PATCH v4 1/8] xen: reuse x86 EFI stub functions for Arm
Hi Jan,
Quoted 32 lines
-----Original Message-----
From: Jan Beulich <[email protected]>
Sent: 2022年5月23日 15:11
To: Wei Chen <[email protected]>
Cc: nd <[email protected]>; Stefano Stabellini <[email protected]>; Julien Grall <[email protected]>; Bertrand Marquis <[email protected]>; Volodymyr Babchuk <[email protected]>; Andrew Cooper <[email protected]>; Roger Pau Monné <[email protected]>; Wei Liu <[email protected]>; Jiamei Xie <[email protected]>; xen- [email protected]
Subject: Re: [PATCH v4 1/8] xen: reuse x86 EFI stub functions for ArmQuoted 19 lines · Wei Chen
x86 is using compiler feature testing to decide EFI build enable or not. When EFI build is disabled, x86 will use an
efi/stub.cfile to replaceefi/runtime.cfor build objects. Following this idea, we introduce a stub file for Arm, but useCONFIG_ARM_EFIto decide EFI build enable or not.And the most functions in x86 EFI
stub.ccan be reused for other architectures, like Arm. So we move them to common and keep the x86 specific function inx86/efi/stub.c.To avoid the symbol link conflict error when linking common stub files to x86/efi. We add a regular file check in efi stub files' link script. Depends on this check we can bypass the link behaviors for existed stub files in x86/efi.
As there is no Arm specific EFI stub function for Arm in current stage, Arm still can use the existed symbol link method for EFI stub files.
Quoted 6 lines
Quoted 2 lines
Change-Id: Idf19db1ada609d05fc0c0c3b0e1e8687c9d6ac71
Issue-Id: SCM-2240I don't think these two lines belong in an upstream submission (I checked patch 2 and at least there they are two similar lines).
Ah, sorry, I had selected the wrong directory after I ran the scripts. But the patch content is the same.
Quoted 8 lines
Quoted 2 lines
Signed-off-by Wei Chen <[email protected]>Tested-by Jiamei Xie <[email protected]>While I'm not really happy with the Arm side, it's only the other parts which this is applicable to anyway (with the stray tags dropped):
Acked-by Jan Beulich <[email protected]>
Thanks!
Quoted 1 line
Jan
PATCH v4 2/8 xen/arm: Keep memory nodes in device tree when Xen boots from EFI
In reply to Wei ChenIn current code, when Xen is booting from EFI, it will delete all memory nodes in device tree. This would work well in current stage, because Xen can get memory map from EFI system table. However, EFI system table cannot completely replace memory nodes of device tree. EFI system table doesn't contain memory NUMA information. Xen depends on ACPI SRAT or device tree memory nodes to parse memory blocks' NUMA mapping. So in EFI + DTB boot, Xen doesn't have any method to get numa-node-id for memory blocks any more. This makes device tree based NUMA support become impossible for Xen in EFI + DTB boot.
So in this patch, we will keep memory nodes in device tree for NUMA code to parse memory numa-node-id later.
As a side effect, if we still parse boot memory information in early_scan_node, bootmem.info will calculate memory ranges in memory nodes twice. So we have to prevent early_scan_node to parse memory nodes in EFI boot.
Change-Id: Ia1acab203887114c9f31cb3eeeb38794868efc9d
Issue-Id: SCM-2240
---
v3 -> v4:
1. No change.
v2 -> v3:
1. Add Rb.
v1 -> v2:
1. Move this patch from later to early of this series.
2. Refine commit message.
--- xen/arch/arm/bootfdt.c | 8 +++++++- xen/arch/arm/efi/efi-boot.h | 25 ------------------------- 2 files changed, 7 insertions(+), 26 deletions(-)
xen/arch/arm/bootfdt.c +7 -1
@@ -11,6 +11,7 @@#include <xen/lib.h> #include <xen/kernel.h> #include <xen/init.h> +#include <xen/efi.h> #include <xen/device_tree.h> #include <xen/libfdt/libfdt.h> #include <xen/sort.h>
@@ -367,7 +368,12 @@ static int __init early_scan_node(const void *fdt, {int rc =0 ; -if (device_tree_node_matches (fdt, node,"memory" ) ) +/* +* If Xen has been booted via UEFI, the memory banks are +* populated. So we should skip the parsing. +*/ +if ( !efi_enabled (EFI_BOOT ) && +device_tree_node_matches (fdt, node,"memory" ) ) rc =process_memory_node (fdt, node, name, depth, address_cells, size_cells, &bootinfo.mem);else if ( depth ==1 && !dt_node_cmp (name,"reserved-memory" ) )
xen/arch/arm/efi/efi-boot.h +0 -25
@@ -231,33 +231,8 @@ EFI_STATUS __init fdt_add_uefi_nodes(EFI_SYSTEM_TABLE *sys_table,int status;u32 fdt_val32;u64 fdt_val64; -int prev;int num_rsv; -/* -* Delete any memory nodes present. The EFI memory map is the only -* memory description provided to Xen. -*/ - prev =0 ; -for (;;) - { -const char *type; -int len; - - node =fdt_next_node (fdt, prev,NULL ); -if ( node <0 ) -break ; - - type =fdt_getprop (fdt, node,"device_type" , &len); -if ( type &&strncmp (type,"memory" , len) ==0 ) - { -fdt_del_node (fdt, node); -continue ; - } - - prev = node; - } -/* * Delete all memory reserve map entries. When booting via UEFI, * kernel will use the UEFI memory map to find reserved regions.
Signature · 1 line
2.25.1
PATCH v4 3/8 xen: introduce an arch helper for default dma zone status
In reply to Wei ChenIn current code, when Xen is running in a multiple nodes NUMA system, it will set dma_bitsize in end_boot_allocator to reserve some low address memory as DMA zone.
There are some x86 implications in the implementation. Because on x86, memory starts from 0. On a multiple-nodes NUMA system, if a single node contains the majority or all of the DMA memory, x86 prefers to give out memory from non-local allocations rather than exhausting the DMA memory ranges. Hence x86 uses dma_bitsize to set aside some largely arbitrary amount of memory for DMA zone. The allocations from DMA zone would happen only after exhausting all other nodes' memory.
But the implications are not shared across all architectures. For example, Arm cannot guarantee the availability of memory below a certain boundary for DMA limited-capability devices either. But currently, Arm doesn't need a reserved DMA zone in Xen. Because there is no DMA device in Xen. And for guests, Xen Arm only allows Dom0 to have DMA operations without IOMMU. Xen will try to allocate memory under 4GB or memory range that is limited by dma_bitsize for Dom0 in boot time. For DomU, even Xen can passthrough devices to DomU without IOMMU, but Xen Arm doesn't guarantee their DMA operations. So, Xen Arm doesn't need a reserved DMA zone to provide DMA memory for guests.
In this patch, we introduce an arch_want_default_dmazone helper for different architectures to determine whether they need to set dma_bitsize for DMA zone reservation or not.
At the same time, when x86 Xen is built with CONFIG_PV=n could probably leverage this new helper to actually not trigger DMA zone reservation.
Issue-Id: SCM-2240
---
v3 -> v4:
1. Add Acked-by.
v2 -> v3:
1. Add Tb.
2. Rename arch_have_default_dmazone to arch_want_default_dmazone. v1 -> v2:
1. Extend the description of Arm's workaround for reserve DMA allocations to avoid the same discussion every time.
2. Use a macro to define arch_have_default_dmazone, because it's little hard to make x86 version to static inline. Use a macro will also avoid add __init for this function.
3. Change arch_have_default_dmazone return value from unsigned int to bool.
4. Un-addressed comment: make arch_have_default_dmazone of x86 to be static inline. Because, if we move arch_have_default_dmazone to x86/asm/numa.h, it depends on nodemask.h to provide num_online_nodes. But nodemask.h needs numa.h to provide MAX_NUMANODES. This will cause a loop dependency. And this function can only be used in end_boot_allocator, in Xen initialization. So I think, compared to the changes introduced by inline, it doesn't mean much.
--- xen/arch/arm/include/asm/numa.h | 1 + xen/arch/x86/include/asm/numa.h | 1 + xen/common/page_alloc.c | 2 +- 3 files changed, 3 insertions(+), 1 deletion(-)
xen/arch/arm/include/asm/numa.h +1 -0
@@ -24,6 +24,7 @@ extern mfn_t first_valid_mfn;#define node_spanned_pages (nid) (max_page - mfn_x(first_valid_mfn))#define node_start_pfn (nid) (mfn_x(first_valid_mfn))#define __node_distance (a, b) (20) +#define arch_want_default_dmazone () (false)#endif /* __ARCH_ARM_NUMA_H */ /*
xen/arch/x86/include/asm/numa.h +1 -0
@@ -74,6 +74,7 @@ static inline __attribute__((pure)) nodeid_t phys_to_nid(paddr_t addr)#define node_spanned_pages (nid) (NODE_DATA(nid)->node_spanned_pages)#define node_end_pfn (nid) (NODE_DATA(nid)->node_start_pfn + \ NODE_DATA(nid)->node_spanned_pages) +#define arch_want_default_dmazone () (num_online_nodes() > 1)extern int valid_numa_range (u64 start,u64 end,nodeid_t node);
xen/common/page_alloc.c +1 -1
@@ -1889,7 +1889,7 @@ void __init end_boot_allocator(void) } nr_bootmem_regions =0 ; -if ( !dma_bitsize && (num_online_nodes () >1 ) ) +if ( !dma_bitsize &&arch_want_default_dmazone () ) dma_bitsize =arch_get_dma_bitsize ();printk ("Domain heap initialised" );
Signature · 1 line
2.25.1
PATCH v4 4/8 xen: decouple NUMA from ACPI in Kconfig
In reply to Wei ChenIn current Xen code only implements x86 ACPI-based NUMA support. So in Xen Kconfig system, NUMA equals to ACPI_NUMA. x86 selects NUMA by default, and CONFIG_ACPI_NUMA is hardcode in config.h.
In a follow-up patch, we will introduce support for NUMA using the device tree. That means we will have two NUMA implementations, so in this patch we decouple NUMA from ACPI based NUMA in Kconfig. Make NUMA as a common feature, that device tree based NUMA also can select it.
Change-Id: I926c73c10aa9bb8e1e7ff77596afb11d3ea18363
Issue-Id: SCM-2240
---
v3 -> v4:
no change.
v2 -> v3:
Add Tb.
v1 -> v2:
No change.
--- xen/arch/x86/Kconfig | 2 +- xen/arch/x86/include/asm/config.h | 1 - xen/common/Kconfig | 3 +++ xen/drivers/acpi/Kconfig | 3 ++- xen/drivers/acpi/Makefile | 2 +- 5 files changed, 7 insertions(+), 4 deletions(-)
xen/arch/x86/Kconfig +1 -1
@@ -6,6 +6,7 @@ config X86 def_bool y select ACPI select ACPI_LEGACY_TABLES_LOOKUP + select ACPI_NUMA select ALTERNATIVE_CALL select ARCH_SUPPORTS_INT128 select CORE_PARKING
@@ -26,7 +27,6 @@ config X86 select HAS_UBSAN select HAS_VPCI if HVM select NEEDS_LIBELF - select NUMA config ARCH_DEFCONFIG string
xen/arch/x86/include/asm/config.h +0 -1
@@ -31,7 +31,6 @@/* Intel P4 currently has largest cache line (L2 line size is 128 bytes). */ #define CONFIG_X86_L1_CACHE_SHIFT 7 -#define CONFIG_ACPI_NUMA 1#define CONFIG_ACPI_SRAT 1#define CONFIG_ACPI_CSTATE 1
xen/common/Kconfig +3 -0
@@ -70,6 +70,9 @@ config MEM_ACCESS config NEEDS_LIBELF bool +config NUMA + bool + config STATIC_MEMORY bool "Static Allocation Support (UNSUPPORTED)" if UNSUPPORTED depends on ARM
xen/drivers/acpi/Kconfig +2 -1
@@ -5,5 +5,6 @@ config ACPI config ACPI_LEGACY_TABLES_LOOKUP bool -config NUMA +config ACPI_NUMA bool + select NUMA
xen/drivers/acpi/Makefile +1 -1
@@ -3,7 +3,7 @@ obj-y += utilities/ obj-$(CONFIG_X86) += apei/ obj-bin-y += tables.init.o -obj-$(CONFIG_NUMA) += numa.o +obj-$(CONFIG_ACPI_NUMA) += numa.o obj-y += osl.o obj-$(CONFIG_HAS_CPUFREQ) += pmstat.o
Signature · 1 line
2.25.1
PATCH v4 5/8 xen/arm: use !CONFIG_NUMA to keep fake NUMA API
In reply to Wei ChenWe have introduced CONFIG_NUMA in a previous patch. And this option is enabled only on x86 at the current stage. In a follow up patch, we will enable this option for Arm. But we still want users to be able to disable the CONFIG_NUMA via Kconfig. In this case, keep the fake NUMA API, will make Arm code still able to work with NUMA aware memory allocation and scheduler.
Change-Id: I595b4c84f61f0b827ad9dfbeef03aae30f4752f0
Issue-Id: SCM-2240
---
v3 -> v4:
no change
v2 -> v3:
Add Tb.
v1 -> v2:
No change.
--- xen/arch/arm/include/asm/numa.h | 5 +++++ 1 file changed, 5 insertions(+)
xen/arch/arm/include/asm/numa.h +5 -0
@@ -5,6 +5,8 @@typedef u8 nodeid_t ; +#ifndef CONFIG_NUMA +/* Fake one node for now. See also node_online_map. */ #define cpu_to_node (cpu) 0#define node_to_cpumask (node) (cpu_online_map)
@@ -24,6 +26,9 @@ extern mfn_t first_valid_mfn;#define node_spanned_pages (nid) (max_page - mfn_x(first_valid_mfn))#define node_start_pfn (nid) (mfn_x(first_valid_mfn))#define __node_distance (a, b) (20) + +#endif +#define arch_want_default_dmazone () (false)#endif /* __ARCH_ARM_NUMA_H */
Signature · 1 line
2.25.1
PATCH v4 6/8 xen/x86: use paddr_t for addresses in NUMA node structure
In reply to Wei ChenNUMA node structure "struct node" is using u64 as node memory range. In order to make other architectures can reuse this NUMA node relative code, we replace the u64 to paddr_t. And use pfn_to_paddr and paddr_to_pfn to replace explicit shift operations. The relate PRIx64 in print messages have been replaced by PRIpaddr at the same time. And some being-phased-out types like u64 in the lines we have touched also have been converted to uint64_t or unsigned long.
Change-Id: Iac64ff398c10f6e642d40d06fc57e28806a1a4ff
Issue-Id: SCM-2240
---
v3 -> v4:
1. Add Tb.
v2 -> v3:
1. Use uint64_t for size in acpi_scan_nodes, make it be consistent with numa_emulation.
2. Add Tb.
v1 -> v2:
1. Drop useless cast.
2. Use initializers of the variables.
3. Replace u64 by uint64_t.
4. Use unsigned long for start_pfn and end_pfn.
--- xen/arch/x86/include/asm/numa.h | 8 ++++---- xen/arch/x86/numa.c | 32 +++++++++++++++----------------- xen/arch/x86/srat.c | 25 +++++++++++++------------ 3 files changed, 32 insertions(+), 33 deletions(-)
xen/arch/x86/include/asm/numa.h +4 -4
@@ -18,7 +18,7 @@ extern cpumask_t node_to_cpumask[];#define node_to_cpumask (node) (node_to_cpumask[node])struct node { -u64 start,end; +paddr_t start, end; }; extern int compute_hash_shift(struct node *nodes, int numnodes,
@@ -38,7 +38,7 @@ extern void numa_set_node(int cpu, nodeid_t node);extern nodeid_t setup_node (unsigned int pxm);extern void srat_detect_node (int cpu); -extern void setup_node_bootmem (nodeid_t nodeid,u64 start,u64 end); +extern void setup_node_bootmem (nodeid_t nodeid,paddr_t start,paddr_t end);extern nodeid_t apicid_to_node[];extern void init_cpu_to_node (void );
@@ -76,9 +76,9 @@ static inline __attribute__((pure)) nodeid_t phys_to_nid(paddr_t addr) NODE_DATA(nid)->node_spanned_pages)#define arch_want_default_dmazone () (num_online_nodes() > 1) -extern int valid_numa_range (u64 start,u64 end,nodeid_t node); +extern int valid_numa_range (paddr_t start,paddr_t end,nodeid_t node); -void srat_parse_regions (u64 addr); +void srat_parse_regions (paddr_t addr);extern u8 __node_distance (nodeid_t a,nodeid_t b);unsigned int arch_get_dma_bitsize (void );
xen/arch/x86/numa.c +15 -17
@@ -162,12 +162,10 @@ int __init compute_hash_shift(struct node *nodes, int numnodes,return shift; }/* initialize NODE_DATA given nodeid and start/end */ -void __init setup_node_bootmem (nodeid_t nodeid,u64 start,u64 end) -{ -unsigned long start_pfn, end_pfn; - - start_pfn = start >>PAGE_SHIFT ; - end_pfn = end >>PAGE_SHIFT ; +void __init setup_node_bootmem (nodeid_t nodeid,paddr_t start,paddr_t end) +{ +unsigned long start_pfn =paddr_to_pfn (start); +unsigned long end_pfn =paddr_to_pfn (end);NODE_DATA (nodeid)->node_start_pfn = start_pfn;NODE_DATA (nodeid)->node_spanned_pages = end_pfn - start_pfn;
@@ -198,11 +196,12 @@ void __init numa_init_array(void)static int numa_fake__initdata =0 ;/* Numa emulation */ -static int __init numa_emulation (u64 start_pfn,u64 end_pfn) +static int __init numa_emulation (unsigned long start_pfn, +unsigned long end_pfn) {int i;struct node nodes[MAX_NUMNODES ]; -u64 sz = ((end_pfn - start_pfn)<<PAGE_SHIFT ) / numa_fake; +uint64_t sz =pfn_to_paddr (end_pfn - start_pfn) / numa_fake;/* Kludge needed for the hash function */ if (hweight64 (sz) >1 )
@@ -218,9 +217,9 @@ static int __init numa_emulation(u64 start_pfn, u64 end_pfn)memset (&nodes,0 ,sizeof (nodes));for ( i =0 ; i < numa_fake; i++ ) { - nodes[i].start = (start_pfn<<PAGE_SHIFT ) + i*sz; + nodes[i].start =pfn_to_paddr (start_pfn) + i * sz;if ( i == numa_fake -1 ) - sz = (end_pfn<<PAGE_SHIFT ) - nodes[i].start; + sz =pfn_to_paddr (end_pfn) - nodes[i].start; nodes[i].end = nodes[i].start + sz; printk(KERN_INFO "Faking node %d at %"PRIx64"-%"PRIx64" (%"PRIu64"MB)\n", i,
@@ -246,6 +245,8 @@ static int __init numa_emulation(u64 start_pfn, u64 end_pfn)void __init numa_initmem_init (unsigned long start_pfn,unsigned long end_pfn) {int i; +paddr_t start =pfn_to_paddr (start_pfn); +paddr_t end =pfn_to_paddr (end_pfn);#ifdef CONFIG_NUMA_EMU if ( numa_fake && !numa_emulation (start_pfn, end_pfn) )
@@ -253,17 +254,15 @@ void __init numa_initmem_init(unsigned long start_pfn, unsigned long end_pfn)#endif #ifdef CONFIG_ACPI_NUMA -if ( !numa_off && !acpi_scan_nodes ((u64 )start_pfn <<PAGE_SHIFT , - (u64 )end_pfn <<PAGE_SHIFT ) ) +if ( !numa_off && !acpi_scan_nodes (start, end) )return ;#endif printk (KERN_INFO "%s\n" , numa_off ?"NUMA turned off" :"No NUMA configuration found" ); -printk (KERN_INFO "Faking a node at %016" PRIx64"-%016" PRIx64"\n" , - (u64 )start_pfn <<PAGE_SHIFT , - (u64 )end_pfn <<PAGE_SHIFT ); +printk (KERN_INFO "Faking a node at %" PRIpaddr"-%" PRIpaddr"\n" , + start, end);/* setup dummy node covering all memory */ memnode_shift =BITS_PER_LONG -1 ; memnodemap = _memnodemap;
@@ -276,8 +275,7 @@ void __init numa_initmem_init(unsigned long start_pfn, unsigned long end_pfn)for ( i =0 ; i < nr_cpu_ids; i++ )numa_set_node (i,0 );cpumask_copy (&node_to_cpumask[0 ],cpumask_of (0 )); -setup_node_bootmem (0 , (u64 )start_pfn <<PAGE_SHIFT , - (u64 )end_pfn <<PAGE_SHIFT ); +setup_node_bootmem (0 , start, end); }void numa_add_cpu (int cpu)
xen/arch/x86/srat.c +13 -12
@@ -104,7 +104,7 @@ nodeid_t setup_node(unsigned pxm)return node; } -int valid_numa_range (u64 start,u64 end,nodeid_t node) +int valid_numa_range (paddr_t start,paddr_t end,nodeid_t node) {int i;
@@ -119,7 +119,7 @@ int valid_numa_range(u64 start, u64 end, nodeid_t node)return 0 ; } -static __init int conflicting_memblks (u64 start,u64 end) +static __init int conflicting_memblks (paddr_t start,paddr_t end) {int i;
@@ -135,7 +135,7 @@ static __init int conflicting_memblks(u64 start, u64 end)return -1 ; } -static __init void cutoff_node (int i,u64 start,u64 end) +static __init void cutoff_node (int i,paddr_t start,paddr_t end) {struct node *nd = &nodes[i];if (nd->start < start) {
@@ -275,7 +275,7 @@ acpi_numa_processor_affinity_init(const struct acpi_srat_cpu_affinity *pa)void __init acpi_numa_memory_affinity_init (const struct acpi_srat_mem_affinity *ma) { -u64 start, end; +paddr_t start, end;unsigned pxm;nodeid_t node;int i;
@@ -318,7 +318,7 @@ acpi_numa_memory_affinity_init(const struct acpi_srat_mem_affinity *ma)bool mismatch = !(ma->flags &ACPI_SRAT_MEM_HOT_PLUGGABLE ) != !test_bit (i, memblk_hotplug); -printk ("%sSRAT: PXM %u (%" PRIx64"-%" PRIx64") overlaps with itself (%" PRIx64"-%" PRIx64")\n" , +printk ("%sSRAT: PXM %u (%" PRIpaddr"-%" PRIpaddr") overlaps with itself (%" PRIpaddr"-%" PRIpaddr")\n" , mismatch ?KERN_ERR :KERN_WARNING , pxm, start, end, node_memblk_range[i].start, node_memblk_range[i].end);if (mismatch) {
@@ -327,7 +327,7 @@ acpi_numa_memory_affinity_init(const struct acpi_srat_mem_affinity *ma) } }else {printk (KERN_ERR -"SRAT: PXM %u (%" PRIx64"-%" PRIx64") overlaps with PXM %u (%" PRIx64"-%" PRIx64")\n" , +"SRAT: PXM %u (%" PRIpaddr"-%" PRIpaddr") overlaps with PXM %u (%" PRIpaddr"-%" PRIpaddr")\n" , pxm, start, end,node_to_pxm (memblk_nodeid[i]), node_memblk_range[i].start, node_memblk_range[i].end);bad_srat ();
@@ -346,7 +346,7 @@ acpi_numa_memory_affinity_init(const struct acpi_srat_mem_affinity *ma) nd->end = end; } } -printk (KERN_INFO "SRAT: Node %u PXM %u %" PRIx64"-%" PRIx64"%s\n" , +printk (KERN_INFO "SRAT: Node %u PXM %u %" PRIpaddr"-%" PRIpaddr"%s\n" , node, pxm, start, end, ma->flags &ACPI_SRAT_MEM_HOT_PLUGGABLE ?" (hotplug)" :"" );
@@ -369,7 +369,7 @@ static int __init nodes_cover_memory(void)for (i =0 ; i < e820.nr_map; i++) {int j, found; -unsigned long long start, end; +paddr_t start, end;if (e820.map[i].type !=E820_RAM ) {continue ;
@@ -396,7 +396,7 @@ static int __init nodes_cover_memory(void)if (start < end) {printk (KERN_ERR "SRAT: No PXM for e820 range: " -"%016Lx - %016Lx\n" , start, end); +"%" PRIpaddr" - %" PRIpaddr"\n" , start, end);return 0 ; } }
@@ -432,7 +432,7 @@ static int __init cf_check srat_parse_region(return 0 ; } -void __init srat_parse_regions (u64 addr) +void __init srat_parse_regions (paddr_t addr) {u64 mask;unsigned int i;
@@ -457,7 +457,7 @@ void __init srat_parse_regions(u64 addr) }/* Use the information discovered above to actually set up the nodes. */ -int __init acpi_scan_nodes (u64 start,u64 end) +int __init acpi_scan_nodes (paddr_t start,paddr_t end) {int i;nodemask_t all_nodes_parsed;
@@ -489,7 +489,8 @@ int __init acpi_scan_nodes(u64 start, u64 end)/* Finally register nodes */ for_each_node_mask (i, all_nodes_parsed) { -u64 size = nodes[i].end - nodes[i].start; +uint64_t size = nodes[i].end - nodes[i].start; +if ( size ==0 )printk (KERN_WARNING "SRAT: Node %u has no memory. " "BIOS Bug or mis-configured hardware?\n" , i);
Signature · 1 line
2.25.1
PATCH v4 7/8 xen/x86: add detection of memory interleaves for different nodes
In reply to Wei ChenOne NUMA node may contain several memory blocks. In current Xen code, Xen will maintain a node memory range for each node to cover all its memory blocks. But here comes the problem, in the gap of one node's two memory blocks, if there are some memory blocks don't belong to this node (remote memory blocks). This node's memory range will be expanded to cover these remote memory blocks.
One node's memory range contains other nodes' memory, this is obviously not very reasonable. This means current NUMA code only can support node has no interleaved memory blocks. However, on a physical machine, the addresses of multiple nodes can be interleaved.
So in this patch, we add code to detect memory interleaves of different nodes. NUMA initialization will be failed and error messages will be printed when Xen detect such hardware configuration.
Change-Id: Ia7ff9a9128ecbe3eb4dddd1307ae8fbe65575ccf
Issue-Id: SCM-2240
---
v3 -> v4:
1. Drop "ERR" prefix for enumeration, and remove init value.
2. Use "switch case" for enumeration, and add "default:"
3. Use "PXM" in log messages.
4. Use unsigned int for node memory block id.
5. Fix some code-style comments.
6. Use "nd->end" in node range expansion check.
v2 -> v3:
1. Merge the check code from a separate function to conflicting_memblks. This will reduce the loop times of node memory blocks.
2. Use an enumeration to indicate conflict check status.
3. Use a pointer to get conflict memory block id.
v1 -> v2:
1. Update the description to say we're after is no memory interleaves of different nodes.
2. Only update node range when it passes the interleave check.
3. Don't use full upper-case for "node".
--- xen/arch/x86/srat.c | 132 +++++++++++++++++++++++++++++++++----------- 1 file changed, 101 insertions(+), 31 deletions(-)
xen/arch/x86/srat.c +101 -31
@@ -42,6 +42,12 @@ static struct node node_memblk_range[NR_NODE_MEMBLKS];static nodeid_t memblk_nodeid[NR_NODE_MEMBLKS ]; static __initdata DECLARE_BITMAP(memblk_hotplug, NR_NODE_MEMBLKS); +enum conflicts { +NO_CONFLICT , +OVERLAP , +INTERLEAVE , +}; +static inline bool node_found (unsigned idx,unsigned pxm) { return ((pxm2node[idx].pxm == pxm) &&
@@ -119,20 +125,45 @@ int valid_numa_range(paddr_t start, paddr_t end, nodeid_t node)return 0 ; } -static __init int conflicting_memblks (paddr_t start,paddr_t end) +static +enum conflicts __init conflicting_memblks (nodeid_t nid,paddr_t start, +paddr_t end,paddr_t nd_start, +paddr_t nd_end,unsigned int *mblkid) { -int i; +unsigned int i; +/* +* Scan all recorded nodes' memory blocks to check conflicts: +* Overlap or interleave. +*/ for (i =0 ; i < num_node_memblks; i++) {struct node *nd = &node_memblk_range[i]; + + *mblkid = i; + +/* Skip 0 bytes node memory block. */ if (nd->start == nd->end)continue ; +/* +* Use memblk range to check memblk overlaps, include the +* self-overlap case. +*/ if (nd->end > start && nd->start < end) -return i; +return OVERLAP ;if (nd->end == end && nd->start == start) -return i; +return OVERLAP ; +/* +* Use node memory range to check whether new range contains +* memory from other nodes - interleave check. We just need +* to check full contains situation. Because overlaps have +* been checked above. +*/ +if (nid != memblk_nodeid[i] && + (nd_start < nd->start && nd->end < nd_end)) +return INTERLEAVE ; } -return -1 ; + +return NO_CONFLICT ; }static __init void cutoff_node (int i,paddr_t start,paddr_t end)
@@ -275,10 +306,13 @@ acpi_numa_processor_affinity_init(const struct acpi_srat_cpu_affinity *pa)void __init acpi_numa_memory_affinity_init (const struct acpi_srat_mem_affinity *ma) { +enum conflicts status; +struct node *nd; +paddr_t nd_start, nd_end;paddr_t start, end;unsigned pxm;nodeid_t node; -int i; +unsigned int i;if (srat_disabled ())return ;
@@ -310,42 +344,78 @@ acpi_numa_memory_affinity_init(const struct acpi_srat_mem_affinity *ma)bad_srat ();return ; } + +/* +* For the node that already has some memory blocks, we will +* expand the node memory range temporarily to check memory +* interleaves with other nodes. We will not use this node +* temp memory range to check overlaps, because it will mask +* the overlaps in same node. +* +* Node with 0 bytes memory doesn't need this expandsion. +*/ + nd_start = start; + nd_end = end; + nd = &nodes[node]; +if (nd->start != nd->end) { +if (nd_start > nd->start) + nd_start = nd->start; + +if (nd_end < nd->end) + nd_end = nd->end; + } +/* It is fine to add this area to the nodes data it will be used later*/ - i =conflicting_memblks (start, end); -if (i <0 ) -/* everything fine */ ; -else if (memblk_nodeid[i] == node) { -bool mismatch = !(ma->flags &ACPI_SRAT_MEM_HOT_PLUGGABLE ) != - !test_bit (i, memblk_hotplug); - -printk ("%sSRAT: PXM %u (%" PRIpaddr"-%" PRIpaddr") overlaps with itself (%" PRIpaddr"-%" PRIpaddr")\n" , - mismatch ?KERN_ERR :KERN_WARNING , pxm, start, end, - node_memblk_range[i].start, node_memblk_range[i].end); -if (mismatch) { + status =conflicting_memblks (node, start, end, nd_start, nd_end, &i); +switch (status) + { +case OVERLAP : + { +if (memblk_nodeid[i] == node) { +bool mismatch = !(ma->flags & +ACPI_SRAT_MEM_HOT_PLUGGABLE ) != + !test_bit (i, memblk_hotplug); + +printk ("%sSRAT: PXM %u (%" PRIpaddr"-%" PRIpaddr") overlaps with itself (%" PRIpaddr"-%" PRIpaddr")\n" , + mismatch ?KERN_ERR :KERN_WARNING , pxm, start, + end, node_memblk_range[i].start, + node_memblk_range[i].end); +if (mismatch) { +bad_srat (); +return ; + } +break ; + }else { +printk (KERN_ERR +"SRAT: PXM %u (%" PRIpaddr"-%" PRIpaddr") overlaps with PXM %u (%" PRIpaddr"-%" PRIpaddr")\n" , + pxm, start, end,node_to_pxm (memblk_nodeid[i]), + node_memblk_range[i].start, + node_memblk_range[i].end);bad_srat ();return ; } - }else { + } + +case INTERLEAVE : + {printk (KERN_ERR -"SRAT: PXM %u (%" PRIpaddr"-%" PRIpaddr") overlaps with PXM %u (%" PRIpaddr"-%" PRIpaddr")\n" , - pxm, start, end,node_to_pxm (memblk_nodeid[i]), +"SRAT: PXM %u: (%" PRIpaddr"-%" PRIpaddr") interleaves with PXM %u memblk (%" PRIpaddr"-%" PRIpaddr")\n" , + node, nd_start, nd_end,node_to_pxm (memblk_nodeid[i]), node_memblk_range[i].start, node_memblk_range[i].end);bad_srat ();return ; } -if (!(ma->flags &ACPI_SRAT_MEM_HOT_PLUGGABLE )) { -struct node *nd = &nodes[node]; -if (!node_test_and_set (node, memory_nodes_parsed)) { - nd->start = start; - nd->end = end; - }else { -if (start < nd->start) - nd->start = start; -if (nd->end < end) - nd->end = end; - } +default : +break ; + } + +if (!(ma->flags &ACPI_SRAT_MEM_HOT_PLUGGABLE )) { +node_set (node, memory_nodes_parsed); + nd->start = nd_start; + nd->end = nd_end; } +printk (KERN_INFO "SRAT: Node %u PXM %u %" PRIpaddr"-%" PRIpaddr"%s\n" , node, pxm, start, end, ma->flags &ACPI_SRAT_MEM_HOT_PLUGGABLE ?" (hotplug)" :"" );
Signature · 1 line
2.25.1
RE: [PATCH v4 7/8] xen/x86: add detection of memory interleaves for different nodes
Hi,
It seems that this patch is the only one that is not properly acked and reviewed in this series. So this is a gentle ping asking if everyone is happy with this patch or are there any more actions that should be taken from the author. Thanks!
Kind regards,
Henry
Quoted 261 lines
-----Original Message-----
Subject: [PATCH v4 7/8] xen/x86: add detection of memory interleaves for different nodesOne NUMA node may contain several memory blocks. In current Xen code, Xen will maintain a node memory range for each node to cover all its memory blocks. But here comes the problem, in the gap of one node's two memory blocks, if there are some memory blocks don't belong to this node (remote memory blocks). This node's memory range will be expanded to cover these remote memory blocks.
One node's memory range contains other nodes' memory, this is obviously not very reasonable. This means current NUMA code only can support node has no interleaved memory blocks. However, on a physical machine, the addresses of multiple nodes can be interleaved.
So in this patch, we add code to detect memory interleaves of different nodes. NUMA initialization will be failed and error messages will be printed when Xen detect such hardware configuration.
Change-Id: Ia7ff9a9128ecbe3eb4dddd1307ae8fbe65575ccf
Issue-Id: SCM-2240Signed-off-by Wei Chen <[email protected]>Tested-by Jiamei Xie <[email protected]>---
v3 -> v4:
1. Drop "ERR" prefix for enumeration, and remove init value.
2. Use "switch case" for enumeration, and add "default:"
3. Use "PXM" in log messages.
4. Use unsigned int for node memory block id.
5. Fix some code-style comments.
6. Use "nd->end" in node range expansion check.
v2 -> v3:
1. Merge the check code from a separate function toconflicting_memblks. This will reduce the loop times of node memory blocks.
2. Use an enumeration to indicate conflict check status.
3. Use a pointer to get conflict memory block id.
v1 -> v2:
1. Update the description to say we're after is no memory interleaves of different nodes.
2. Only update node range when it passes the interleave check.
3. Don't use full upper-case for "node".--- xen/arch/x86/srat.c | 132 +++++++++++++++++++++++++++++++++----------- 1 file changed, 101 insertions(+), 31 deletions(-)xen/arch/x86/srat.c +6
-0@@ -42,6 +42,12 @@ static struct node node_memblk_range[NR_NODE_MEMBLKS ];static nodeid_t memblk_nodeid[NR_NODE_MEMBLKS ]; static __initdata DECLARE_BITMAP(memblk_hotplug, NR_NODE_MEMBLKS); +enum conflicts { +NO_CONFLICT , +OVERLAP , +INTERLEAVE , +}; +static inline bool node_found (unsigned idx,unsigned pxm){
xen/arch/x86/srat.c +21
-4return ((pxm2node[idx].pxm == pxm) &&@@ -119,20 +125,45 @@ int valid_numa_range(paddr_t start, paddr_t end, nodeid_t node)return 0 ; } -static __init int conflicting_memblks (paddr_t start,paddr_t end) +static +enum conflicts __init conflicting_memblks (nodeid_t nid,paddr_t start, +paddr_t end,paddr_t nd_start, +paddr_t nd_end,unsigned int *mblkid) { -int i; +unsigned int i; +/* +* Scan all recorded nodes' memory blocks to check conflicts: +* Overlap or interleave. +*/ for (i =0 ; i < num_node_memblks; i++) {struct node *nd = &node_memblk_range[i]; + + *mblkid = i; + +/* Skip 0 bytes node memory block. */ if (nd->start == nd->end)continue ; +/* +* Use memblk range to check memblk overlaps, include the +* self-overlap case. +*/ if (nd->end > start && nd->start < end) -return i; +return OVERLAP ;if (nd->end == end && nd->start == start) -return i; +return OVERLAP ; +/* +* Use node memory range to check whether new range contains
xen/arch/x86/srat.c +1
-0+* memory from other nodes - interleave check. We just need
xen/arch/x86/srat.c +12
-2+* to check full contains situation. Because overlaps have +* been checked above. +*/ +if (nid != memblk_nodeid[i] && + (nd_start < nd->start && nd->end < nd_end)) +return INTERLEAVE ; } -return -1 ; + +return NO_CONFLICT ; }static __init void cutoff_node (int i,paddr_t start,paddr_t end)@@ -275,10 +306,13 @@ acpi_numa_processor_affinity_init(const struct acpi_srat_cpu_affinity *pa)void __init acpi_numa_memory_affinity_init (const struct acpi_srat_mem_affinity *ma) { +enum conflicts status; +struct node *nd; +paddr_t nd_start, nd_end;paddr_t start, end;unsigned pxm;nodeid_t node; -int i; +unsigned int i;if (srat_disabled ())xen/arch/x86/srat.c +21
-5return ;@@ -310,42 +344,78 @@ acpi_numa_memory_affinity_init(const struct acpi_srat_mem_affinity *ma)bad_srat ();return ; } + +/* +* For the node that already has some memory blocks, we will +* expand the node memory range temporarily to check memory +* interleaves with other nodes. We will not use this node +* temp memory range to check overlaps, because it will mask +* the overlaps in same node. +* +* Node with 0 bytes memory doesn't need this expandsion. +*/ + nd_start = start; + nd_end = end; + nd = &nodes[node]; +if (nd->start != nd->end) { +if (nd_start > nd->start) + nd_start = nd->start; + +if (nd_end < nd->end) + nd_end = nd->end; + } +/* It is fine to add this area to the nodes data it will be used later*/ - i =conflicting_memblks (start, end); -if (i <0 ) -/* everything fine */ ; -else if (memblk_nodeid[i] == node) { - bool mismatch = !(ma->flags &
ACPI_SRAT_MEM_HOT_PLUGGABLE) !=xen/arch/x86/srat.c +0
-3- !test_bit (i, memblk_hotplug); - - printk("%sSRAT: PXM %u (%"PRIpaddr"-%"PRIpaddr")overlaps with itself (%"PRIpaddr"-%"PRIpaddr")\n",
xen/arch/x86/srat.c +0
-1- mismatch ? KERN_ERR : KERN_WARNING, pxm, start,end,
xen/arch/x86/srat.c +0
-1- node_memblk_range[i].start,node_memblk_range[i].end);
xen/arch/x86/srat.c +1
-1-if (mismatch) { + status = conflicting_memblks(node, start, end, nd_start, nd_end,&i);
xen/arch/x86/srat.c +7
-0+switch (status) + { +case OVERLAP : + { +if (memblk_nodeid[i] == node) { + bool mismatch = !(ma->flags & +
ACPI_SRAT_MEM_HOT_PLUGGABLE) !=xen/arch/x86/srat.c +3
-0+ !test_bit (i, memblk_hotplug); + + printk("%sSRAT: PXM %u (%"PRIpaddr"-%"PRIpaddr") overlaps with itself (%"PRIpaddr"-%"PRIpaddr")\n",
xen/arch/x86/srat.c +1
-0+ mismatch ? KERN_ERR : KERN_WARNING, pxm,start,
xen/arch/x86/srat.c +10
-0+ end, node_memblk_range[i].start, + node_memblk_range[i].end); +if (mismatch) { +bad_srat (); +return ; + } +break ; + } else { + printk(KERN_ERR + "SRAT: PXM %u (%"PRIpaddr"-%"PRIpaddr")overlaps with PXM %u (%"PRIpaddr"-%"PRIpaddr")\n",
xen/arch/x86/srat.c +1
-0+ pxm, start, end,
node_to_pxm(memblk_nodeid[i]),xen/arch/x86/srat.c +6
-2+ node_memblk_range[i].start, + node_memblk_range[i].end);bad_srat ();return ; } - } else { + } + +case INTERLEAVE : + { printk(KERN_ERR - "SRAT: PXM %u (%"PRIpaddr"-%"PRIpaddr") overlapswith PXM %u (%"PRIpaddr"-%"PRIpaddr")\n",
xen/arch/x86/srat.c +1
-1- pxm, start, end, node_to_pxm(memblk_nodeid[i]), + "SRAT: PXM %u: (%"PRIpaddr"-%"PRIpaddr")interleaves with PXM %u memblk (%"PRIpaddr"-%"PRIpaddr")\n",
xen/arch/x86/srat.c +1
-0+ node, nd_start, nd_end,
node_to_pxm(memblk_nodeid[i]),
node_memblk_range[i].start,
node_memblk_range[i].end);xen/arch/x86/srat.c +9
-11bad_srat ();return ; } -if (!(ma->flags &ACPI_SRAT_MEM_HOT_PLUGGABLE )) { -struct node *nd = &nodes[node]; -if (!node_test_and_set (node, memory_nodes_parsed)) { - nd->start = start; - nd->end = end; - }else { -if (start < nd->start) - nd->start = start; -if (nd->end < end) - nd->end = end; - } +default : +break ; + } + +if (!(ma->flags &ACPI_SRAT_MEM_HOT_PLUGGABLE )) { +node_set (node, memory_nodes_parsed); + nd->start = nd_start; + nd->end = nd_end; } + printk(KERN_INFO "SRAT: Node %u PXM %u %"PRIpaddr"-%"PRIpaddr"%s\n",
xen/arch/x86/srat.c +0
-0node, pxm, start, end, ma->flags & ACPI_SRAT_MEM_HOT_PLUGGABLE ? " (hotplug)" :"");
--
2.25.1
Re: [PATCH v4 7/8] xen/x86: add detection of memory interleaves for different nodes
In reply to Wei ChenQuoted 25 lines · Wei Chen
xen/arch/x86/srat.c +13
-2@@ -119,20 +125,45 @@ int valid_numa_range(paddr_t start, paddr_t end, nodeid_t node)return 0 ; } -static __init int conflicting_memblks (paddr_t start,paddr_t end) +static +enum conflicts __init conflicting_memblks (nodeid_t nid,paddr_t start, +paddr_t end,paddr_t nd_start, +paddr_t nd_end,unsigned int *mblkid) { -int i; +unsigned int i; +/* +* Scan all recorded nodes' memory blocks to check conflicts: +* Overlap or interleave. +*/ for (i =0 ; i < num_node_memblks; i++) {struct node *nd = &node_memblk_range[i]; + + *mblkid = i; + +/* Skip 0 bytes node memory block. */ if (nd->start == nd->end)continue ;
xen/arch/x86/srat.c int valid_numa_range(paddr_t start, paddr_t end, nodeid_t node) · line 154
Quoted 10 lines
xen/arch/x86/srat.c +6
-2+/* +* Use memblk range to check memblk overlaps, include the +* self-overlap case. +*/ if (nd->end > start && nd->start < end) -return i; +return OVERLAP ;if (nd->end == end && nd->start == start) -return i; +return OVERLAP ;
Knowing that nd's range is non-empty, is this 2nd condition actually needed here? (Such an adjustment, if you decided to make it and if not split out to a separate patch, would need calling out in the description.)
xen/arch/x86/srat.c int valid_numa_range(paddr_t start, paddr_t end, nodeid_t node) · line 163
Quoted 9 lines
xen/arch/x86/srat.c +9
-0+/* +* Use node memory range to check whether new range contains +* memory from other nodes - interleave check. We just need +* to check full contains situation. Because overlaps have +* been checked above. +*/ +if (nid != memblk_nodeid[i] && + (nd_start < nd->start && nd->end < nd_end)) +return INTERLEAVE ;
Doesn't this need to be <= in both cases (albeit I think one of the two expressions would want switching around, to better line up with the earlier one, visible in context further up).
xen/arch/x86/srat.c acpi_numa_processor_affinity_init(const struct acpi_srat_cpu_affinity *pa) · line 309
Quoted 5 lines
xen/arch/x86/srat.c +1
-0@@ -275,10 +306,13 @@ acpi_numa_processor_affinity_init(const struct acpi_srat_cpu_affinity *pa)void __init acpi_numa_memory_affinity_init (const struct acpi_srat_mem_affinity *ma) { +enum conflicts status;
I don't think you need this local variable.
Quoted 30 lines
xen/arch/x86/srat.c +21
-4@@ -310,42 +344,78 @@ acpi_numa_memory_affinity_init(const struct acpi_srat_mem_affinity *ma)bad_srat ();return ; } + +/* +* For the node that already has some memory blocks, we will +* expand the node memory range temporarily to check memory +* interleaves with other nodes. We will not use this node +* temp memory range to check overlaps, because it will mask +* the overlaps in same node. +* +* Node with 0 bytes memory doesn't need this expandsion. +*/ + nd_start = start; + nd_end = end; + nd = &nodes[node]; +if (nd->start != nd->end) { +if (nd_start > nd->start) + nd_start = nd->start; + +if (nd_end < nd->end) + nd_end = nd->end; + } +/* It is fine to add this area to the nodes data it will be used later*/ - i =conflicting_memblks (start, end); -if (i <0 ) -/* everything fine */ ; -else if (memblk_nodeid[i] == node) {
xen/arch/x86/srat.c acpi_numa_memory_affinity_init(const struct acpi_srat_mem_affinity *ma) · line 371
Quoted 10 lines
xen/arch/x86/srat.c +3
-7-bool mismatch = !(ma->flags &ACPI_SRAT_MEM_HOT_PLUGGABLE ) != - !test_bit (i, memblk_hotplug); - -printk ("%sSRAT: PXM %u (%" PRIpaddr"-%" PRIpaddr") overlaps with itself (%" PRIpaddr"-%" PRIpaddr")\n" , - mismatch ?KERN_ERR :KERN_WARNING , pxm, start, end, - node_memblk_range[i].start, node_memblk_range[i].end); -if (mismatch) { + status =conflicting_memblks (node, start, end, nd_start, nd_end, &i); +switch (status) + {
Style: Missing blank before ( and the brace goes on the same line here (Linux style).
Review acpi_numa_memory_affinity_init(const struct acpi_srat_mem_affinity *ma) · line 373
Quoted 2 lines
(quoted diff) +2
-0+ case OVERLAP: + {
Please omit braces at case labels unless you need a new scope to declare variables.
Quoted 13 lines
xen/arch/x86/srat.c +13
-0+if (memblk_nodeid[i] == node) { +bool mismatch = !(ma->flags & +ACPI_SRAT_MEM_HOT_PLUGGABLE ) != + !test_bit (i, memblk_hotplug); + +printk ("%sSRAT: PXM %u (%" PRIpaddr"-%" PRIpaddr") overlaps with itself (%" PRIpaddr"-%" PRIpaddr")\n" , + mismatch ?KERN_ERR :KERN_WARNING , pxm, start, + end, node_memblk_range[i].start, + node_memblk_range[i].end); +if (mismatch) { +bad_srat (); +return ; + }
xen/arch/x86/srat.c acpi_numa_memory_affinity_init(const struct acpi_srat_mem_affinity *ma) · line 396
Quoted 10 lines
xen/arch/x86/srat.c +7
-0+break ; + }else { +printk (KERN_ERR +"SRAT: PXM %u (%" PRIpaddr"-%" PRIpaddr") overlaps with PXM %u (%" PRIpaddr"-%" PRIpaddr")\n" , + pxm, start, end,node_to_pxm (memblk_nodeid[i]), + node_memblk_range[i].start, + node_memblk_range[i].end);bad_srat ();return ; }
To limit indentation depth, on of the two sides of the conditional can be moved out, by omitting the unnecessary "else". To reduce the diff it may be worthwhile to invert the if() condition, allowing the (then implicit) "else" case to remain (almost) unchanged from the original.
xen/arch/x86/srat.c acpi_numa_memory_affinity_init(const struct acpi_srat_mem_affinity *ma) · line 403
Quoted 10 lines
xen/arch/x86/srat.c +6
-3- }else { + } + +case INTERLEAVE : + { printk(KERN_ERR - "SRAT: PXM %u (%"PRIpaddr"-%"PRIpaddr") overlaps with PXM %u (%"PRIpaddr"-%"PRIpaddr")\n", - pxm, start, end, node_to_pxm(memblk_nodeid[i]), + "SRAT: PXM %u: (%"PRIpaddr"-%"PRIpaddr") interleaves with PXM %u memblk (%"PRIpaddr"-%"PRIpaddr")\n", + node, nd_start, nd_end, node_to_pxm(memblk_nodeid[i]),
Hmm, you have PXM in the log message text, but you still pass "node" as first argument.
Since you're touching all these messages, could I ask you to convert all ranges to proper mathematical interval representation? I.e. [start,end) here aiui as the end addresses look to be non-inclusive.
Quoted 8 lines
xen/arch/x86/srat.c +0
-3node_memblk_range[i].start, node_memblk_range[i].end);bad_srat ();return ; } -if (!(ma->flags &ACPI_SRAT_MEM_HOT_PLUGGABLE )) { -struct node *nd = &nodes[node]; -if (!node_test_and_set (node, memory_nodes_parsed)) {
xen/arch/x86/srat.c acpi_numa_memory_affinity_init(const struct acpi_srat_mem_affinity *ma) · line 410
Quoted 10 lines
xen/arch/x86/srat.c +2
-8- nd->start = start; - nd->end = end; - }else { -if (start < nd->start) - nd->start = start; -if (nd->end < end) - nd->end = end; - } +default : +break ;
This wants to be "case NO_CONFLICT:", such that the compiler would warn if a new enumerator appears without adding code here. (An alternative - which personally I don't like - would be to put ASSERT_UNREACHABLE() in the default: case. The downside is that then the issue would only be noticeable at runtime.)
Jan
RE: [PATCH v4 7/8] xen/x86: add detection of memory interleaves for different nodes
Hi Jan,
Quoted 44 lines
-----Original Message-----
From: Jan Beulich <[email protected]>
Sent: 2022年5月31日 21:21
To: Wei Chen <[email protected]>
Cc: nd <[email protected]>; Andrew Cooper <[email protected]>; Roger Pau Monné <[email protected]>; Wei Liu <[email protected]>; Jiamei Xie <[email protected]>; [email protected]
Subject: Re: [PATCH v4 7/8] xen/x86: add detection of memory interleaves for different nodesReview int valid_numa_range(paddr_t start, paddr_t end,
Quoted 1 line · Wei Chen
(quoted diff) +0
-0@@ -119,20 +125,45 @@ int valid_numa_range(paddr_t start, paddr_t end,
nodeid_tnode)Quoted 31 lines
xen/arch/x86/srat.c +18
-3return 0 ; } -static __init int conflicting_memblks (paddr_t start,paddr_t end) +static +enum conflicts __init conflicting_memblks (nodeid_t nid,paddr_t start, +paddr_t end,paddr_t nd_start, +paddr_t nd_end,unsigned int *mblkid) { -int i; +unsigned int i; +/* +* Scan all recorded nodes' memory blocks to check conflicts: +* Overlap or interleave. +*/ for (i =0 ; i < num_node_memblks; i++) {struct node *nd = &node_memblk_range[i]; + + *mblkid = i; + +/* Skip 0 bytes node memory block. */ if (nd->start == nd->end)continue ; +/* +* Use memblk range to check memblk overlaps, include the +* self-overlap case. +*/ if (nd->end > start && nd->start < end) -return i; +return OVERLAP ;
Quoted 8 lines
xen/arch/x86/srat.c int valid_numa_range(paddr_t start, paddr_t end, nodeid_t node) · line 154
Quoted 3 lines
xen/arch/x86/srat.c +1
-1if (nd->end == end && nd->start == start) -return i; +return OVERLAP ;Knowing that nd's range is non-empty, is this 2nd condition actually needed here? (Such an adjustment, if you decided to make it and if not split out to a separate patch, would need calling out in the description.)
The 2nd condition here, you meant is "(nd->end == end && nd->start == start)" or just "nd->start == start" after "&&"?
My understanding is the first case, "(nd->end == end && nd->start == start)" will be covered by "(nd->end > start && nd->start < end)". If so, I'll remove it in the next version and add some descriptions in the commit log and code comment.
Quoted 15 lines
xen/arch/x86/srat.c int valid_numa_range(paddr_t start, paddr_t end, nodeid_t node) · line 163
Quoted 10 lines
xen/arch/x86/srat.c +9
-0+/* +* Use node memory range to check whether new range contains +* memory from other nodes - interleave check. We just need +* to check full contains situation. Because overlaps have +* been checked above. +*/ +if (nid != memblk_nodeid[i] && + (nd_start < nd->start && nd->end < nd_end)) +return INTERLEAVE ;Doesn't this need to be <= in both cases (albeit I think one of the two expressions would want switching around, to better line up with the earlier one, visible in context further up).
Yes, I will add "="in both cases. But for switching around, I also wanted to make a better line up. But if nid == memblk_nodeid[i], the check of (nd_start < nd->start && nd->end < nd_end) is meaningless. I'll adjust their order in the next version if you think this is acceptable.
Quoted 9 lines
Review acpi_numa_processor_affinity_init(const struct
Quoted 1 line
(quoted diff) +0
-0@@ -275,10 +306,13 @@ acpi_numa_processor_affinity_init(const struct
acpi_srat_cpu_affinity*pa)xen/arch/x86/srat.c acpi_numa_processor_affinity_init(const struct acpi_srat_cpu_affinity *pa) · line 309
Quoted 4 lines
xen/arch/x86/srat.c +1
-0void __init acpi_numa_memory_affinity_init (const struct acpi_srat_mem_affinity *ma) { +enum conflicts status;I don't think you need this local variable.
Why I don't need this one? Did you mean I can use
switch (conflicting_memblks(...)) directly?
Quoted 37 lines
Review acpi_numa_memory_affinity_init(const struct
Quoted 1 line
(quoted diff) +0
-0@@ -310,42 +344,78 @@ acpi_numa_memory_affinity_init(const struct
acpi_srat_mem_affinity*ma)Quoted 15 lines
xen/arch/x86/srat.c +12
-0bad_srat ();return ; } + +/* +* For the node that already has some memory blocks, we will +* expand the node memory range temporarily to check memory +* interleaves with other nodes. We will not use this node +* temp memory range to check overlaps, because it will mask +* the overlaps in same node. +* +* Node with 0 bytes memory doesn't need this expandsion. +*/ + nd_start = start; + nd_end = end;xen/arch/x86/srat.c acpi_numa_memory_affinity_init(const struct acpi_srat_mem_affinity *ma)
Quoted 10 lines
xen/arch/x86/srat.c +9
-0+ nd = &nodes[node]; +if (nd->start != nd->end) { +if (nd_start > nd->start) + nd_start = nd->start; + +if (nd_end < nd->end) + nd_end = nd->end; + } +/* It is fine to add this area to the nodes data it will be used later*/
xen/arch/x86/srat.c acpi_numa_memory_affinity_init(const struct acpi_srat_mem_affinity *ma)
Quoted 8 lines
xen/arch/x86/srat.c +0
-8- i =conflicting_memblks (start, end); -if (i <0 ) -/* everything fine */ ; - else if (memblk_nodeid[i] == node) { - bool mismatch = !(ma->flags & ACPI_SRAT_MEM_HOT_PLUGGABLE) != - !test_bit(i, memblk_hotplug); - - printk("%sSRAT: PXM %u (%"PRIpaddr"-%"PRIpaddr") overlaps withitself (%"PRIpaddr"-%"PRIpaddr")\n",
Quoted 10 lines
xen/arch/x86/srat.c acpi_numa_memory_affinity_init(const struct acpi_srat_mem_affinity *ma) · line 371
Quoted 6 lines
xen/arch/x86/srat.c +3
-3- mismatch ?KERN_ERR :KERN_WARNING , pxm, start, end, - node_memblk_range[i].start, node_memblk_range[i].end); -if (mismatch) { + status =conflicting_memblks (node, start, end, nd_start, nd_end, &i); +switch (status) + {Style: Missing blank before ( and the brace goes on the same line here (Linux style).
Ok.
Quoted 6 lines
Review acpi_numa_memory_affinity_init(const struct · line 373
Quoted 2 lines
(quoted diff) +2
-0+ case OVERLAP: + {Please omit braces at case labels unless you need a new scope to declare variables.
OK.
Quoted 19 lines
xen/arch/x86/srat.c acpi_numa_memory_affinity_init(const struct acpi_srat_mem_affinity *ma)
Quoted 6 lines
xen/arch/x86/srat.c +6
-0+ if (memblk_nodeid[i] == node) { + bool mismatch = !(ma->flags & + ACPI_SRAT_MEM_HOT_PLUGGABLE) != + !test_bit(i, memblk_hotplug); + + printk("%sSRAT: PXM %u (%"PRIpaddr"-%"PRIpaddr")overlaps with itself (%"PRIpaddr"-%"PRIpaddr")\n",
xen/arch/x86/srat.c acpi_numa_memory_affinity_init(const struct acpi_srat_mem_affinity *ma)
Quoted 11 lines
xen/arch/x86/srat.c +11
-0+ mismatch ?KERN_ERR :KERN_WARNING , pxm, start, + end, node_memblk_range[i].start, + node_memblk_range[i].end); +if (mismatch) { +bad_srat (); +return ; + } +break ; + } else { + printk(KERN_ERR + "SRAT: PXM %u (%"PRIpaddr"-%"PRIpaddr") overlapswith PXM %u (%"PRIpaddr"-%"PRIpaddr")\n",
Quoted 12 lines
xen/arch/x86/srat.c acpi_numa_memory_affinity_init(const struct acpi_srat_mem_affinity *ma) · line 396
Quoted 6 lines
xen/arch/x86/srat.c +3
-0+ pxm, start, end,node_to_pxm (memblk_nodeid[i]), + node_memblk_range[i].start, + node_memblk_range[i].end);bad_srat ();return ; }To limit indentation depth, on of the two sides of the conditional can be moved out, by omitting the unnecessary "else". To reduce the diff it may be worthwhile to invert the
if()condition, allowing the (then implicit) "else" case to remain (almost) unchanged from the original.
I will adjust them in next version.
Quoted 8 lines
xen/arch/x86/srat.c acpi_numa_memory_affinity_init(const struct acpi_srat_mem_affinity *ma)
Quoted 7 lines
xen/arch/x86/srat.c +4
-2- } else { + } + +case INTERLEAVE : + { printk(KERN_ERR - "SRAT: PXM %u (%"PRIpaddr"-%"PRIpaddr") overlaps withPXM %u (%"PRIpaddr"-%"PRIpaddr")\n",
Quoted 8 lines
Review acpi_numa_memory_affinity_init(const struct · line 402
Quoted 2 lines
(quoted diff) +1
-1- pxm, start, end, node_to_pxm(memblk_nodeid[i]), + "SRAT: PXM %u: (%"PRIpaddr"-%"PRIpaddr") interleaveswith PXM %u memblk (%"PRIpaddr"-%"PRIpaddr")\n",
xen/arch/x86/srat.c acpi_numa_memory_affinity_init(const struct acpi_srat_mem_affinity *ma) · line 403
Quoted 1 line
xen/arch/x86/srat.c +1
-0+ node, nd_start, nd_end, node_to_pxm(memblk_nodeid[i]),Hmm, you have PXM in the log message text, but you still pass "node" as first argument.
I will fix it.
Quoted 4 lines
Since you're touching all these messages, could I ask you to convert all ranges to proper mathematical interval representation? I.e. [start,end) here aiui as the end addresses look to be non-inclusive.
Sure, I will do it.
Quoted 16 lines
Quoted 16 lines
xen/arch/x86/srat.c +0
-11node_memblk_range[i].start, node_memblk_range[i].end);bad_srat ();return ; } -if (!(ma->flags &ACPI_SRAT_MEM_HOT_PLUGGABLE )) { -struct node *nd = &nodes[node]; -if (!node_test_and_set (node, memory_nodes_parsed)) { - nd->start = start; - nd->end = end; - }else { -if (start < nd->start) - nd->start = start; -if (nd->end < end) - nd->end = end; - }
Quoted 9 lines
xen/arch/x86/srat.c acpi_numa_memory_affinity_init(const struct acpi_srat_mem_affinity *ma) · line 410
Quoted 2 lines
xen/arch/x86/srat.c +2
-0+default : +break ;This wants to be "case
NO_CONFLICT:", such that the compiler would warn if a new enumerator appears without adding code here. (An alternative - which personally I don't like - would be to putASSERT_UNREACHABLE()in the default: case. The downside is that then the issue would only be noticeable at runtime.)
Thanks, I will adjust it to:
case NO_CONFLICT: break; default: ASSERT_UNREACHABLE();
in next version.
Quoted 1 line
Jan
Re: [PATCH v4 7/8] xen/x86: add detection of memory interleaves for different nodes
Quoted 46 lines · Wei Chen
Quoted 37 lines
From: Jan Beulich <[email protected]>
Sent: 2022年5月31日 21:21Review int valid_numa_range(paddr_t start, paddr_t end,
Quoted 1 line · Wei Chen
(quoted diff) +0
-0@@ -119,20 +125,45 @@ int valid_numa_range(paddr_t start, paddr_t end,
nodeid_tnode)Quoted 31 lines
xen/arch/x86/srat.c +18
-3return 0 ; } -static __init int conflicting_memblks (paddr_t start,paddr_t end) +static +enum conflicts __init conflicting_memblks (nodeid_t nid,paddr_t start, +paddr_t end,paddr_t nd_start, +paddr_t nd_end,unsigned int *mblkid) { -int i; +unsigned int i; +/* +* Scan all recorded nodes' memory blocks to check conflicts: +* Overlap or interleave. +*/ for (i =0 ; i < num_node_memblks; i++) {struct node *nd = &node_memblk_range[i]; + + *mblkid = i; + +/* Skip 0 bytes node memory block. */ if (nd->start == nd->end)continue ; +/* +* Use memblk range to check memblk overlaps, include the +* self-overlap case. +*/ if (nd->end > start && nd->start < end) -return i; +return OVERLAP ;Quoted 8 lines
xen/arch/x86/srat.c int valid_numa_range(paddr_t start, paddr_t end, nodeid_t node) · line 154
Quoted 3 lines
xen/arch/x86/srat.c +1
-1if (nd->end == end && nd->start == start) -return i; +return OVERLAP ;Knowing that nd's range is non-empty, is this 2nd condition actually needed here? (Such an adjustment, if you decided to make it and if not split out to a separate patch, would need calling out in the description.)
Quoted 2 lines
The 2nd condition here, you meant is "(
nd->end== end &&nd->start== start)" or just "nd->start== start" after "&&"?
No, I mean the entire 2nd if().
Quoted 15 lines
Quoted 5 lines
Quoted 5 lines
xen/arch/x86/srat.c +5
-0+/* +* Use node memory range to check whether new range contains +* memory from other nodes - interleave check. We just need +* to check full contains situation. Because overlaps have +* been checked above. Quoted 9 lines
xen/arch/x86/srat.c int valid_numa_range(paddr_t start, paddr_t end, nodeid_t node) · line 163
Quoted 4 lines
xen/arch/x86/srat.c +4
-0+*/ +if (nid != memblk_nodeid[i] && + (nd_start < nd->start && nd->end < nd_end)) +return INTERLEAVE ;Doesn't this need to be <= in both cases (albeit I think one of the two expressions would want switching around, to better line up with the earlier one, visible in context further up).
Quoted 5 lines
Yes, I will add "="in both cases. But for switching around, I also wanted to make a better line up. But if nid == memblk_nodeid[i], the check of (
nd_start<nd->start&&nd->end<nd_end) is meaningless. I'll adjust their order in the next version if you think this is acceptable.
I wasn't referring to the "nid != memblk_nodeid[i]" part at all. What I'm after is for the two range checks to come as close as possible to what the other range check does. (Which, as I notice only now, would include the dropping of the unnecessary inner pair of parentheses.) E.g. (there are other variations of it)
if (nid != memblk_nodeid[i] && nd->start >= nd_start && nd->end <= nd_end) return INTERLEAVE;
Quoted 10 lines
Quoted 9 lines
Review acpi_numa_processor_affinity_init(const struct
Quoted 1 line
(quoted diff) +0
-0@@ -275,10 +306,13 @@ acpi_numa_processor_affinity_init(const struct
acpi_srat_cpu_affinity*pa)xen/arch/x86/srat.c acpi_numa_processor_affinity_init(const struct acpi_srat_cpu_affinity *pa) · line 309
Quoted 4 lines
xen/arch/x86/srat.c +1
-0void __init acpi_numa_memory_affinity_init (const struct acpi_srat_mem_affinity *ma) { +enum conflicts status;I don't think you need this local variable.
Quoted 2 lines
Why I don't need this one? Did you mean I can use
switch (conflicting_memblks(...)) directly?
Yes. Why could this not be possible?
Quoted 26 lines
Quoted 16 lines
Quoted 16 lines
xen/arch/x86/srat.c +0
-11node_memblk_range[i].start, node_memblk_range[i].end);bad_srat ();return ; } -if (!(ma->flags &ACPI_SRAT_MEM_HOT_PLUGGABLE )) { -struct node *nd = &nodes[node]; -if (!node_test_and_set (node, memory_nodes_parsed)) { - nd->start = start; - nd->end = end; - }else { -if (start < nd->start) - nd->start = start; -if (nd->end < end) - nd->end = end; - }Quoted 9 lines
xen/arch/x86/srat.c acpi_numa_memory_affinity_init(const struct acpi_srat_mem_affinity *ma) · line 410
Quoted 2 lines
xen/arch/x86/srat.c +2
-0+default : +break ;This wants to be "case
NO_CONFLICT:", such that the compiler would warn if a new enumerator appears without adding code here. (An alternative - which personally I don't like - would be to putASSERT_UNREACHABLE()in the default: case. The downside is that then the issue would only be noticeable at runtime.)
Quoted 6 lines
Thanks, I will adjust it to:
case NO_CONFLICT: break; default: ASSERT_UNREACHABLE();in next version.
As said - I consider this form less desirable, as it'll defer noticing of an issue from build-time to runtime. If you think that form is better, may I ask why?
Jan
RE: [PATCH v4 7/8] xen/x86: add detection of memory interleaves for different nodes
Hi Jan,
Quoted 57 lines
-----Original Message-----
From: Jan Beulich <[email protected]>
Sent: 2022年6月1日 14:32
To: Wei Chen <[email protected]>
Cc: nd <[email protected]>; Andrew Cooper <[email protected]>; Roger Pau Monné <[email protected]>; Wei Liu <[email protected]>; Jiamei Xie <[email protected]>; [email protected]
Subject: Re: [PATCH v4 7/8] xen/x86: add detection of memory interleaves for different nodesQuoted 46 lines · Wei Chen
Quoted 45 lines
From: Jan Beulich <[email protected]>
Sent: 2022年5月31日 21:21Review int valid_numa_range(paddr_t start, paddr_t end,
Quoted 1 line · Wei Chen
(quoted diff) +0
-0@@ -119,20 +125,45 @@ int valid_numa_range(paddr_t start, paddr_t end,
nodeid_tnode)Quoted 24 lines
xen/arch/x86/srat.c +13
-2return 0 ; } -static __init int conflicting_memblks (paddr_t start,paddr_t end) +static +enum conflicts __init conflicting_memblks (nodeid_t nid,paddr_t start, +paddr_t end,paddr_t nd_start, +paddr_t nd_end,unsigned int *mblkid) { -int i; +unsigned int i; +/* +* Scan all recorded nodes' memory blocks to check conflicts: +* Overlap or interleave. +*/ for (i =0 ; i < num_node_memblks; i++) {struct node *nd = &node_memblk_range[i]; + + *mblkid = i; + +/* Skip 0 bytes node memory block. */ if (nd->start == nd->end)continue ;xen/arch/x86/srat.c int valid_numa_range(paddr_t start, paddr_t end, nodeid_t node) · line 154
Quoted 10 lines
xen/arch/x86/srat.c +6
-2+/* +* Use memblk range to check memblk overlaps, include the +* self-overlap case. +*/ if (nd->end > start && nd->start < end) -return i; +return OVERLAP ;if (nd->end == end && nd->start == start) -return i; +return OVERLAP ;Knowing that nd's range is non-empty, is this 2nd condition actually needed here? (Such an adjustment, if you decided to make it and if not split out to a separate patch, would need calling out in the description.)
Quoted 6 lines
Quoted 1 line
The 2nd condition here, you meant is "(
nd->end== end &&nd->start==start)"
Quoted 1 line
or just "
nd->start== start" after "&&"?No, I mean the entire 2nd
if().
OK.
Quoted 27 lines
Quoted 15 lines
Quoted 5 lines
Quoted 5 lines
xen/arch/x86/srat.c +5
-0+/* +* Use node memory range to check whether new range contains +* memory from other nodes - interleave check. We just need +* to check full contains situation. Because overlaps have +* been checked above. Quoted 9 lines
xen/arch/x86/srat.c int valid_numa_range(paddr_t start, paddr_t end, nodeid_t node) · line 163
Quoted 4 lines
xen/arch/x86/srat.c +4
-0+*/ +if (nid != memblk_nodeid[i] && + (nd_start < nd->start && nd->end < nd_end)) +return INTERLEAVE ;Doesn't this need to be <= in both cases (albeit I think one of the two expressions would want switching around, to better line up with the earlier one, visible in context further up).
Quoted 5 lines
Yes, I will add "="in both cases. But for switching around, I also wanted to make a better line up. But if nid == memblk_nodeid[i], the check of (
nd_start<nd->start&&nd->end<nd_end) is meaningless. I'll adjust their order in the next version if you think this is acceptable.I wasn't referring to the "nid != memblk_nodeid[i]" part at all. What I'm after is for the two range checks to come as close as possible to what the other range check does. (Which, as I notice only now, would include the dropping of the unnecessary inner pair of parentheses.) E.g. (there are other variations of it)
Quoted 4 lines
if (nid != memblk_nodeid[i] && nd->start >= nd_start && nd->end <= nd_end) return INTERLEAVE;
Oh, thanks. I had thought too much, I will drop them.
Quoted 11 lines
Quoted 4 lines
Quoted 4 lines
Review acpi_numa_processor_affinity_init(const struct
Quoted 1 line
(quoted diff) +0
-0@@ -275,10 +306,13 @@ acpi_numa_processor_affinity_init(const struct
acpi_srat_cpu_affinity*pa)Quoted 2 lines
(quoted diff) +0
-0void __init acpi_numa_memory_affinity_init(const struct acpi_srat_mem_affinity*ma)
Quoted 6 lines
Quoted 5 lines
xen/arch/x86/srat.c acpi_numa_processor_affinity_init(const struct acpi_srat_cpu_affinity *pa) · line 309
Quoted 2 lines
xen/arch/x86/srat.c +1
-0{ +enum conflicts status;I don't think you need this local variable.
Quoted 5 lines
Quoted 2 lines
Why I don't need this one? Did you mean I can use
switch (conflicting_memblks(...)) directly?Yes. Why could this not be possible?
Ok.
Quoted 33 lines
Quoted 26 lines
Quoted 16 lines
Quoted 16 lines
xen/arch/x86/srat.c +0
-11node_memblk_range[i].start, node_memblk_range[i].end);bad_srat ();return ; } -if (!(ma->flags &ACPI_SRAT_MEM_HOT_PLUGGABLE )) { -struct node *nd = &nodes[node]; -if (!node_test_and_set (node, memory_nodes_parsed)) { - nd->start = start; - nd->end = end; - }else { -if (start < nd->start) - nd->start = start; -if (nd->end < end) - nd->end = end; - }Quoted 9 lines
xen/arch/x86/srat.c acpi_numa_memory_affinity_init(const struct acpi_srat_mem_affinity *ma) · line 410
Quoted 2 lines
xen/arch/x86/srat.c +2
-0+default : +break ;This wants to be "case
NO_CONFLICT:", such that the compiler would warn if a new enumerator appears without adding code here. (An alternative - which personally I don't like - would be to putASSERT_UNREACHABLE()in the default: case. The downside is that then the issue would only be noticeable at runtime.)Quoted 6 lines
Thanks, I will adjust it to:
case NO_CONFLICT: break; default: ASSERT_UNREACHABLE();in next version.
Quoted 4 lines
As said - I consider this form less desirable, as it'll defer noticing of an issue from build-time to runtime. If you think that form is better, may I ask why?
Ok. I will drop the default. I had mis-understood your comment.
Quoted 1 line
Jan
Re: [PATCH v4 7/8] xen/x86: add detection of memory interleaves for different nodes
In reply to Jan BeulichHi Jan,
Quoted 24 lines · Jan Beulich
xen/arch/x86/srat.c int valid_numa_range(paddr_t start, paddr_t end, nodeid_t node) · line 125
Quoted 2 lines · Wei Chen
xen/arch/x86/srat.c +0
-0@@ -119,20 +125,45 @@ int valid_numa_range(paddr_t start, paddr_t end, nodeid_t node)return 0 ;To limit indentation depth, on of the two sides of the conditional can be moved out, by omitting the unnecessary "else". To reduce the diff it may be worthwhile to invert the
if()condition, allowing the (then implicit) "else" case to remain (almost) unchanged from the original.xen/arch/x86/srat.c acpi_numa_memory_affinity_init(const struct acpi_srat_mem_affinity *ma) · line 403
Quoted 10 lines
xen/arch/x86/srat.c +6
-3- }else { + } + +case INTERLEAVE : + { printk(KERN_ERR - "SRAT: PXM %u (%"PRIpaddr"-%"PRIpaddr") overlaps with PXM %u (%"PRIpaddr"-%"PRIpaddr")\n", - pxm, start, end, node_to_pxm(memblk_nodeid[i]), + "SRAT: PXM %u: (%"PRIpaddr"-%"PRIpaddr") interleaves with PXM %u memblk (%"PRIpaddr"-%"PRIpaddr")\n", + node, nd_start, nd_end, node_to_pxm(memblk_nodeid[i]),Hmm, you have PXM in the log message text, but you still pass "node" as first argument.
Quoted 4 lines
Since you're touching all these messages, could I ask you to convert all ranges to proper mathematical interval representation? I.e. [start,end) here aiui as the end addresses look to be non-inclusive.
Sorry, I want to confirm with you about this comment again. Now the messages look like:
(XEN) NUMA: PXM 0: (0000000080000000-00000008d8000000) interleaves...
So I want to know, is it [0000000080000000-00000008d8000000) or (0000000080000000-00000008d7ffffff) addressed your comment? Literally, I think it's case#1?
Thanks,
Wei Chen
Quoted 1 line
Re: [PATCH v4 7/8] xen/x86: add detection of memory interleaves for different nodes
Quoted 32 lines · Wei Chen
Hi Jan,
Quoted 24 lines · Jan Beulich
xen/arch/x86/srat.c int valid_numa_range(paddr_t start, paddr_t end, nodeid_t node) · line 125
Quoted 2 lines · Wei Chen
xen/arch/x86/srat.c +0
-0@@ -119,20 +125,45 @@ int valid_numa_range(paddr_t start, paddr_t end, nodeid_t node)return 0 ;To limit indentation depth, on of the two sides of the conditional can be moved out, by omitting the unnecessary "else". To reduce the diff it may be worthwhile to invert the
if()condition, allowing the (then implicit) "else" case to remain (almost) unchanged from the original.xen/arch/x86/srat.c acpi_numa_memory_affinity_init(const struct acpi_srat_mem_affinity *ma) · line 403
Quoted 10 lines
xen/arch/x86/srat.c +6
-3- }else { + } + +case INTERLEAVE : + { printk(KERN_ERR - "SRAT: PXM %u (%"PRIpaddr"-%"PRIpaddr") overlaps with PXM %u (%"PRIpaddr"-%"PRIpaddr")\n", - pxm, start, end, node_to_pxm(memblk_nodeid[i]), + "SRAT: PXM %u: (%"PRIpaddr"-%"PRIpaddr") interleaves with PXM %u memblk (%"PRIpaddr"-%"PRIpaddr")\n", + node, nd_start, nd_end, node_to_pxm(memblk_nodeid[i]),Hmm, you have PXM in the log message text, but you still pass "node" as first argument.
Quoted 4 lines
Since you're touching all these messages, could I ask you to convert all ranges to proper mathematical interval representation? I.e. [start,end) here aiui as the end addresses look to be non-inclusive.
Quoted 7 lines
Sorry, I want to confirm with you about this comment again. Now the messages look like:
(XEN) NUMA: PXM 0: (0000000080000000-00000008d8000000) interleaves...So I want to know, is it [0000000080000000-00000008d8000000) or (0000000080000000-00000008d7ffffff) addressed your comment? Literally, I think it's case#1?
The former or [0000000080000000-00000008d7ffffff]. Parentheses stand for exclusive boundaries, while square brackets stand for inclusive ones.
Jan
PATCH v4 8/8 xen/x86: use INFO level for node's without memory log message
In reply to Wei ChenIn previous code, Xen was using KERN_WARNING for log message when Xen found a node without memory. Xen will print this warning message, and said that this may be an BIOS Bug or mis-configured hardware. But actually, this warning is bogus, because in an NUMA setting, nodes can only have processors, and with 0 bytes memory. So it is unreasonable to warn about BIOS or hardware corruption based on the detection of node with 0 bytes memory.
So in this patch, we remove the warning messages, but just keep an info message to info users that there is one or more nodes with 0 bytes memory in the system.
Issue-Id: SCM-2240
---
v3 -> v4:
1. Remove full stop and use lower-case for node.
2. Add Rb.
v2 -> v3:
new commit.
--- xen/arch/x86/srat.c | 3 +-- 1 file changed, 1 insertion(+), 2 deletions(-)
xen/arch/x86/srat.c +1 -2
@@ -562,8 +562,7 @@ int __init acpi_scan_nodes(paddr_t start, paddr_t end)uint64_t size = nodes[i].end - nodes[i].start;if ( size ==0 ) -printk (KERN_WARNING "SRAT: Node %u has no memory. " -"BIOS Bug or mis-configured hardware?\n" , i); +printk (KERN_INFO "SRAT: node %u has no memory\n" , i);setup_node_bootmem (i, nodes[i].start, nodes[i].end); }
Signature · 1 line
2.25.1