pinctrl: renesas: trivial fixes and enhancements
Subsystems (2)
v2 cover pinctrl: renesas: trivial fixes and enhancements
Hi All,
This patch series includes trivial fixes and enhancements to renesas pfc driver.
Cheers,
Prabhakar
v1->v2
* Patch 1/2 updated commit message
* patch 2/2 unchanged
Lad Prabhakar (2):
pinctrl: renesas: Make sure the pin type is updated after setting the
MUX
pinctrl: renesas: Implement get_pin_muxing() callback
drivers/pinctrl/renesas/pfc.c | 50 ++++++++++++++++++++++++++++++++--- 1 file changed, 47 insertions(+), 3 deletions(-)
Signature · 1 line
2.17.1
PATCH v2 1/2 pinctrl: renesas: Make sure the pin type is updated after setting the MUX
By default on startup all the pin types are configured to PINMUX_TYPE_NONE (in sh_pfc_map_pins()), when pin is set as GPIO the pin type is updated to PINMUX_TYPE_GPIO. But the type is not updated when the pin is set as a function in sh_pfc_pinctrl_pin_set() or sh_pfc_pinctrl_group_set() calls (these calls only set the MUX if the pin type is PINMUX_TYPE_NONE ie unused).
So with the current implementation pin functionality could be overwritten silently, for example if the same pin is added for SPI and serial.
This patch makes sure of updating pin type after every successful call to sh_pfc_config_mux() and thus fixing from pin functionality to be overwritten.
--- drivers/pinctrl/renesas/pfc.c | 19 ++++++++++++++++--- 1 file changed, 16 insertions(+), 3 deletions(-)
drivers/pinctrl/renesas/pfc.c +16 -3
@@ -537,11 +537,18 @@ static int sh_pfc_pinctrl_pin_set(struct udevice *dev, unsigned pin_selector,const struct sh_pfc_pin *pin = &priv->pfc.info->pins[pin_selector];int idx =sh_pfc_get_pin_index (pfc, pin->pin);struct sh_pfc_pin_config *cfg = &pmx->configs[idx]; +int ret;if (cfg->type !=PINMUX_TYPE_NONE )return -EBUSY ; -return sh_pfc_config_mux (pfc, pin->enum_id,PINMUX_TYPE_FUNCTION ); + ret =sh_pfc_config_mux (pfc, pin->enum_id,PINMUX_TYPE_FUNCTION ); +if (ret) +return ret; + + cfg->type =PINMUX_TYPE_FUNCTION ; + +return 0 ; } static int sh_pfc_pinctrl_group_set(struct udevice *dev, unsigned group_selector,
@@ -551,12 +558,14 @@ static int sh_pfc_pinctrl_group_set(struct udevice *dev, unsigned group_selectorstruct sh_pfc_pinctrl *pmx = &priv->pmx;struct sh_pfc *pfc = &priv->pfc;const struct sh_pfc_pin_group *grp = &priv->pfc.info->groups[group_selector]; +struct sh_pfc_pin_config *cfg;unsigned int i;int ret =0 ; +int idx;for (i =0 ; i < grp->nr_pins; ++i) { -int idx =sh_pfc_get_pin_index (pfc, grp->pins[i]); -struct sh_pfc_pin_config *cfg = &pmx->configs[idx]; + idx =sh_pfc_get_pin_index (pfc, grp->pins[i]); + cfg = &pmx->configs[idx];if (cfg->type !=PINMUX_TYPE_NONE ) { ret = -EBUSY ;
@@ -568,6 +577,10 @@ static int sh_pfc_pinctrl_group_set(struct udevice *dev, unsigned group_selector ret =sh_pfc_config_mux (pfc, grp->mux[i],PINMUX_TYPE_FUNCTION );if (ret <0 )break ; + + idx =sh_pfc_get_pin_index (pfc, grp->pins[i]); + cfg = &pmx->configs[idx]; + cfg->type =PINMUX_TYPE_FUNCTION ; } done:
Signature · 1 line
2.17.1
PATCH v2 1/2 pinctrl: renesas: Make sure the pin type is updated after setting the MUX
Quoted 9 lines · Lad Prabhakar
By default on startup all the pin types are configured to
PINMUX_TYPE_NONE(insh_pfc_map_pins()), when pin is set as GPIO the pin type is updated toPINMUX_TYPE_GPIO. But the type is not updated when the pin is set as a function insh_pfc_pinctrl_pin_set()orsh_pfc_pinctrl_group_set()calls (these calls only set the MUX if the pin type isPINMUX_TYPE_NONEie unused).So with the current implementation pin functionality could be overwritten silently, for example if the same pin is added for SPI and serial.
Shouldn't the pinctrl core rather warn about such a collision and abort?
PATCH v2 1/2 pinctrl: renesas: Make sure the pin type is updated after setting the MUX
Hi Marek,
Thank you for the review.
Quoted 17 lines
-----Original Message-----
From: Marek Vasut <[email protected]>
Sent: 15 November 2020 13:18
To: Prabhakar Mahadev Lad <[email protected]>; Simon Glass <[email protected]>; Masahiro Yamada <[email protected]>; u-boot at lists.denx.de
Cc: Adam Ford <[email protected]>; Tom Rini <[email protected]>; Prabhakar <[email protected]>; Biju Das <[email protected]>
Subject: Re: [PATCH v2 1/2] pinctrl: renesas: Make sure the pin type is updated after setting the MUXQuoted 7 lines · Lad Prabhakar
By default on startup all the pin types are configured to
PINMUX_TYPE_NONE(insh_pfc_map_pins()), when pin is set as GPIO the pin type is updated toPINMUX_TYPE_GPIO. But the type is not updated when the pin is set as a function insh_pfc_pinctrl_pin_set()orsh_pfc_pinctrl_group_set()calls (these calls only set the MUX if the pin type isPINMUX_TYPE_NONEie unused).
Quoted 5 lines
Quoted 2 lines
So with the current implementation pin functionality could be overwritten silently, for example if the same pin is added for SPI and serial.
Shouldn't the pinctrl core rather warn about such a collision and abort?
As mentioned in the commit message this does fix the pin functionality from being overwritten (ie it aborts). Ill post a v3 adding a warning message.
Cheers,
Prabhakar
PATCH v2 2/2 pinctrl: renesas: Implement get_pin_muxing() callback
In reply to Lad PrabhakarImplement get_pin_muxing() callback so that pinmux status command can be used on Renesas platforms.
--- drivers/pinctrl/renesas/pfc.c | 31 +++++++++++++++++++++++++++++++ 1 file changed, 31 insertions(+)
drivers/pinctrl/renesas/pfc.c +31 -0
@@ -44,6 +44,7 @@ enum sh_pfc_model {struct sh_pfc_pin_config {u32 type; +const char *function_name; };struct sh_pfc_pinctrl {
@@ -448,6 +449,30 @@ static const char *sh_pfc_pinctrl_get_group_name(struct udevice *dev,return priv->pfc.info->groups[selector].name; } +static int sh_pfc_pinctrl_get_pin_muxing (struct udevice *dev, +unsigned int selector, +char *buf,int size) +{ +struct sh_pfc_pinctrl_priv *priv =dev_get_priv (dev); +struct sh_pfc_pinctrl *pmx = &priv->pmx; +struct sh_pfc *pfc = &priv->pfc; +struct sh_pfc_pin_config *cfg; +const struct sh_pfc_pin *pin; +int idx; + + pin = &priv->pfc.info->pins[selector]; +if (!pin) { +snprintf (buf, size,"Unknown" ); +return -EINVAL ; + } + + idx =sh_pfc_get_pin_index (pfc, pin->pin); + cfg = &pmx->configs[idx]; +snprintf (buf, size,"%s" , cfg->function_name); + +return 0 ; +} +static int sh_pfc_pinctrl_get_functions_count (struct udevice *dev) {struct sh_pfc_pinctrl_priv *priv =dev_get_priv (dev);
@@ -495,6 +520,7 @@ static int sh_pfc_gpio_request_enable(struct udevice *dev,return ret; cfg->type =PINMUX_TYPE_GPIO ; + cfg->function_name ="gpio" ;return 0 ; }
@@ -524,6 +550,7 @@ static int sh_pfc_gpio_disable_free(struct udevice *dev, cfg = &pmx->configs[idx]; cfg->type =PINMUX_TYPE_NONE ; + cfg->function_name ="none" ;return 0 ; }
@@ -547,6 +574,7 @@ static int sh_pfc_pinctrl_pin_set(struct udevice *dev, unsigned pin_selector,return ret; cfg->type =PINMUX_TYPE_FUNCTION ; + cfg->function_name ="function" ;return 0 ; }
@@ -581,6 +609,7 @@ static int sh_pfc_pinctrl_group_set(struct udevice *dev, unsigned group_selector idx =sh_pfc_get_pin_index (pfc, grp->pins[i]); cfg = &pmx->configs[idx]; cfg->type =PINMUX_TYPE_FUNCTION ; + cfg->function_name = priv->pfc.info->groups[group_selector].name; } done:
@@ -787,6 +816,7 @@ static struct pinctrl_ops sh_pfc_pinctrl_ops = { .get_pin_name = sh_pfc_pinctrl_get_pin_name, .get_groups_count = sh_pfc_pinctrl_get_groups_count, .get_group_name = sh_pfc_pinctrl_get_group_name, + .get_pin_muxing = sh_pfc_pinctrl_get_pin_muxing, .get_functions_count = sh_pfc_pinctrl_get_functions_count, .get_function_name = sh_pfc_pinctrl_get_function_name,
@@ -817,6 +847,7 @@ static int sh_pfc_map_pins(struct sh_pfc *pfc, struct sh_pfc_pinctrl *pmx)for (i =0 ; i < pfc->info->nr_pins; ++i) {struct sh_pfc_pin_config *cfg = &pmx->configs[i]; cfg->type =PINMUX_TYPE_NONE ; + cfg->function_name ="none" ; }return 0 ;
Signature · 1 line
2.17.1