LINUX BOOT UP PROBLEM-PPC405 ML403
Hi,
When I try to boot the linux on the Xilinx virtex4 fx ml403 board.
The information below shows up:
----------------------------------------------------------------------------
-
Welcome to ML403 Linux 2.6
Starting system...
mounting /proc: done.
Mounting '/' read-write: done.
brining up loopback interface: done.
Mounting /tmp: done.
Starting syslogd: done.
Starting klogd: done.
Starting inetd: done.
System started.
starting pid 158, tty '': '/sbin/getty'
process '/sbin/getty -L ttyUL0 9600 vt100' (pid 158) exited. Scheduling it for r
estart.
starting pid 163, tty '': '/sbin/getty'
process '/sbin/getty -L ttyUL0 9600 vt100' (pid 163) exited. Scheduling it for r
estart.
starting pid 168, tty '': '/sbin/getty'
----------------------------------------------------------------------------
----------------------
I am using the uart lite 9600, and the inittab of my root file system is as below:
::sysinit:/etc/init.d/rcS
#::askfirst:-/bin/sh
::ctrlaltdel:/sbin/reboot
::shutdown:/sbin/swapoff -a
::shutdown:/bin/umount -a -r
::restart:/sbin/init
::respawn:/sbin/getty -L ttyUL0 9600 vt100
Anybody can help?
Thanks!
Best regards,
Li Jun
Welcome to the Xilinx Virtex-4 ML403 Evaluation Platform Bootloader Menu!
Please choose a demo by typing in the number of the demo you want to use
Or select a demo using the directional buttons and LCD or VGA display
(Then press the center button to start the selected demo)
1. Virtex-4 Slide Show
2. Web Server Demo
3. Linux Demo
4. QNX Demo
5. USB Demo
6. My own ACE file
7. Load/Restore Flash Images
loaded at: 00400000 004F819C board data at: 004F6120 004F619C relocated to: 00404060 004040DC zimage at: 00404E49 004F5B98 avail ram: 004F9000 04000000
Linux/PPC load: console=ttyUL0,9600 ip=on root=/dev/xsa2 rw Uncompressing Linux...done.
Now booting the kernel
[ 0.000000] Linux version 2.6.23-rc2 (liju0010@rplinx1) (gcc version 4.1.0) # 19 Thu Feb 12 17:02:45 SGT 2009 [ 0.000000] Xilinx ML403 Reference System (Virtex-4 FX) [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 16384 [ 0.000000] Normal 16384 -> 16384 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 16384 [ 0.000000] Built 1 zonelists in Zone order. Total pages: 16256 [ 0.000000] Kernel command line: console=ttyUL0,9600 ip=on root=/dev/xsa2 rw [ 0.000000] Xilinx INTC #0 at 0x81800000 mapped to 0xFDFFF000 [ 0.000000] PID hash table entries: 256 (order: 8, 1024 bytes) [ 0.000341] Console: colour dummy device 80x25 [ 0.001046] Dentry cache hash table entries: 8192 (order: 3, 32768 bytes) [ 0.002459] Inode-cache hash table entries: 4096 (order: 2, 16384 bytes) [ 0.027896] Memory: 62780k available (1524k kernel code, 500k data, 96k init, 0k highmem) [ 0.113286] Mount-cache hash table entries: 512 [ 0.121929] NET: Registered protocol family 16 [ 0.163221] NET: Registered protocol family 2 [ 0.196707] IP route cache hash table entries: 1024 (order: 0, 4096 bytes) [ 0.197982] TCP established hash table entries: 2048 (order: 2, 16384 bytes) [ 0.198606] TCP bind hash table entries: 2048 (order: 1, 8192 bytes) [ 0.198995] TCP: Hash tables configured (established 2048 bind 2048) [ 0.199071] TCP reno registered [ 0.220331] io scheduler noop registered [ 0.220426] io scheduler anticipatory registered (default) [ 0.220499] io scheduler deadline registered [ 0.220823] io scheduler cfq registered [ 0.309153] uartlite.0: ttyUL0 at MMIO 0x84000000 (irq = 1) is a uartlite [ 0.310642] console [ttyUL0] enabled [ 2.270738] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 bloc ksize [ 2.363600] xsysace xsysace.0: Xilinx SystemACE revision 1.0.12 [ 2.435897] xsysace xsysace.0: capacity: 1019088 sectors [ 2.500435] xsa: xsa1 xsa2 [ 2.544344] tun: Universal TUN/TAP device driver, 1.6 [ 2.605239] tun: (C) 1999-2004 Max Krasnyansky <[email protected]> [ 2.682049] mice: PS/2 mouse device common for all mice [ 2.745383] TCP cubic registered [ 2.784516] NET: Registered protocol family 1 [ 2.837079] NET: Registered protocol family 17 [ 3.393776] IP-Config: No network devices available. [ 3.922144] kjournald starting. Commit interval 5 seconds [ 3.988474] EXT3-fs warning: mounting unchecked fs, running e2fsck is recomme nded [ 4.117526] EXT3 FS on xsa2, internal journal [ 4.170014] EXT3-fs: recovery complete. [ 4.254147] EXT3-fs: mounted filesystem with ordered data mode. [ 4.325712] VFS: Mounted root (ext3 filesystem). [ 4.382081] Freeing unused kernel memory: 96k init
init started: BusyBox v1.7.2 (2007-12-21 20:42:03 SGT) starting pid 142, tty '': '/etc/init.d/rcS'
Welcome to ML403 Linux 2.6
Starting system...
mounting /proc: done.
Mounting '/' read-write: done.
brining up loopback interface: done.
Mounting /tmp: done.
Starting syslogd: done.
Starting klogd: done.
Starting inetd: done.
System started.
starting pid 158, tty '': '/sbin/getty'
process '/sbin/getty -L ttyUL0 9600 vt100' (pid 158) exited. Scheduling it for r estart.
starting pid 163, tty '': '/sbin/getty'
process '/sbin/getty -L ttyUL0 9600 vt100' (pid 163) exited. Scheduling it for r estart.
starting pid 168, tty '': '/sbin/getty'
Is there a /dev/ttyUL0 in your root filesystem?
Quoted 88 lines · Li Jun (Aaron)
Hi,
When I try to boot the linux on the Xilinx virtex4 fx ml403 board.
The information below shows up:
-----------------------------------------------------------------------------
Welcome to ML403 Linux 2.6
Starting system...
mounting /proc: done.
Mounting '/' read-write: done.
brining up loopback interface: done.
Mounting /tmp: done.
Starting syslogd: done.
Starting klogd: done.
Starting inetd: done.
System started.
starting pid 158, tty '': '
/sbin/getty'process '
/sbin/getty-L ttyUL0 9600 vt100' (pid 158) exited. Scheduling it for restart.
starting pid 163, tty '': '
/sbin/getty'process '
/sbin/getty-L ttyUL0 9600 vt100' (pid 163) exited. Scheduling it for restart.
starting pid 168, tty '': '
/sbin/getty'--------------------------------------------------------------------------------------------------
I am using the uart lite 9600, and the inittab of my root file system is as below:
::sysinit:/etc/init.d/rcS
#::askfirst:-/bin/sh
::ctrlaltdel:/sbin/reboot
::shutdown:/sbin/swapoff -a
::shutdown:/bin/umount -a -r
::restart:/sbin/init
::respawn:/sbin/getty -L ttyUL0 9600 vt100
Anybody can help?
Thanks!
Best regards,
Li Jun
_______________________________________________
Linuxppc-dev mailing list
[email protected]
https://ozlabs.org/mailman/listinfo/linuxppc-dev
Signature · 2 lines
Grant Likely, B.Sc., P.Eng. Secret Lab Technologies Ltd.
Hi Grant,
I can not find the /dev/ttyUL0 in my root filesystem.
Is that the problem? What should I do? Just make a node, like : mknod /dev/ttyUL0?
I am not familiar with the root filesystem.
Thanks!
Best regards,
Li Jun
-----Original Message-----
From: Grant Likely [mailto:[email protected]]=20
Sent: 2009=C4=EA2=D4=C214=C8=D5 2:08
To: Li Jun (Aaron)
Cc: [email protected]
Subject: Re: LINUX BOOT UP PROBLEM-PPC405 ML403
Is there a /dev/ttyUL0 in your root filesystem?
Quoted 9 lines · Li Jun (Aaron)
Hi,
When I try to boot the linux on the Xilinx virtex4 fx ml403 board.
The information below shows up:
-------------------------------------------------------------------------=
---
-
Quoted 19 lines
Welcome to ML403 Linux 2.6
Starting system...
mounting /proc: done.
Mounting '/' read-write: done.
brining up loopback interface: done.
Mounting /tmp: done.
Starting syslogd: done.
Starting klogd: done.
Quoted 7 lines
Starting inetd: done.
System started.
starting pid 158, tty '': '
/sbin/getty'process '
/sbin/getty-L ttyUL0 9600 vt100' (pid 158) exited. =
Scheduling it
Quoted 7 lines
for r
estart.
starting pid 163, tty '': '
/sbin/getty'process '
/sbin/getty-L ttyUL0 9600 vt100' (pid 163) exited. =
Scheduling it
Quoted 7 lines
for r
estart.
starting pid 168, tty '': '
/sbin/getty'
-------------------------------------------------------------------------=
---
----------------------
Quoted 2 lines
I am using the uart lite 9600, and the inittab of my root file system =
is
as
Quoted 28 lines
below:
::sysinit:/etc/init.d/rcS
#::askfirst:-/bin/sh
::ctrlaltdel:/sbin/reboot
::shutdown:/sbin/swapoff -a
::shutdown:/bin/umount -a -r
::restart:/sbin/init
::respawn:/sbin/getty -L ttyUL0 9600 vt100
Anybody can help?
Thanks!
Best regards,
Quoted 9 lines
Li Jun
_______________________________________________
Linuxppc-dev mailing list
[email protected]
https://ozlabs.org/mailman/listinfo/linuxppc-dev
--=20
Grant Likely, B.Sc., P.Eng.
Secret Lab Technologies Ltd.