send-email: expose header information to git-send-email's sendemail-validate hook
v6 cover send-email: expose header information to git-send-email's sendemail-validate hook
Thank you for all the great feedback! At your suggestion I improved the test for the header argument and the documentation.
Michael Strawbridge (2):
send-email: refactor header generation functions
send-email: expose header information to git-send-email's
sendemail-validate hook
Documentation/githooks.txt | 29 ++++++++++++-- git-send-email.perl | 80 +++++++++++++++++++++++++------------- t/t9001-send-email.sh | 47 +++++++++++++++++++++- 3 files changed, 122 insertions(+), 34 deletions(-)
Signature · 1 line
2.34.1
PATCH v6 1/2 send-email: refactor header generation functions
Split process_file and send_message into easier to use functions. Making SMTP header information more widely available.
--- git-send-email.perl | 49 ++++++++++++++++++++++++++++----------------- 1 file changed, 31 insertions(+), 18 deletions(-)
git-send-email.perl +31 -18
@@ -1495,16 +1495,7 @@ sub file_name_is_absolute { return File::Spec::Functions::file_name_is_absolute($path); } -# Prepares the email, then asks the user what to do. -# -# If the user chooses to send the email, it's sent and 1 is returned. -# If the user chooses not to send the email, 0 is returned. -# If the user decides they want to make further edits, -1 is returned and the -# caller is expected to call send_message again after the edits are performed. -# -# If an error occurs sending the email, this just dies. - -sub send_message { +sub gen_header { my @recipients = unique_email_list(@to); @cc = (grep { my $cc = extract_valid_address_or_die($_); not grep { $cc eq $_ || $_ =~ /<\Q${cc}\E>$/ } @recipients
@@ -1546,6 +1537,22 @@ sub send_message { if (@xh) { $header .= join("\n", @xh) . "\n"; } + my $recipients_ref = \@recipients; + return ($recipients_ref, $to, $date, $gitversion, $cc, $ccline, $header); +} + +# Prepares the email, then asks the user what to do. +# +# If the user chooses to send the email, it's sent and 1 is returned. +# If the user chooses not to send the email, 0 is returned. +# If the user decides they want to make further edits, -1 is returned and the +# caller is expected to call send_message again after the edits are performed. +# +# If an error occurs sending the email, this just dies. + +sub send_message { + my ($recipients_ref, $to, $date, $gitversion, $cc, $ccline, $header) = gen_header(); + my @recipients = @$recipients_ref; my @sendmail_parameters = ('-i', @recipients); my $raw_from = $sender;
@@ -1735,11 +1742,8 @@ sub send_message { $references = $initial_in_reply_to || ''; $message_num = 0; -# Prepares the email, prompts the user, sends it out -# Returns 0 if an edit was done and the function should be called again, or 1 -# otherwise. -sub process_file { - my ($t) = @_; +sub pre_process_file { + my ($t, $quiet) = @_; open my $fh, "<", $t or die sprintf(__("can't open file %s"), $t);
@@ -1893,9 +1897,9 @@ sub process_file { } close $fh; - push @to, recipients_cmd("to-cmd", "to", $to_cmd, $t) + push @to, recipients_cmd("to-cmd", "to", $to_cmd, $t, $quiet) if defined $to_cmd; - push @cc, recipients_cmd("cc-cmd", "cc", $cc_cmd, $t) + push @cc, recipients_cmd("cc-cmd", "cc", $cc_cmd, $t, $quiet) if defined $cc_cmd && !$suppress_cc{'cccmd'}; if ($broken_encoding{$t} && !$has_content_type) {
@@ -1954,6 +1958,15 @@ sub process_file { @initial_to = @to; } } +} + +# Prepares the email, prompts the user, sends it out +# Returns 0 if an edit was done and the function should be called again, or 1 +# otherwise. +sub process_file { + my ($t) = @_; + + pre_process_file($t, $quiet); my $message_was_sent = send_message(); if ($message_was_sent == -1) {
@@ -2002,7 +2015,7 @@ sub process_file { # Execute a command (e.g. $to_cmd) to get a list of email addresses # and return a results array sub recipients_cmd { - my ($prefix, $what, $cmd, $file) = @_; + my ($prefix, $what, $cmd, $file, $quiet) = @_; my @addresses = (); open my $fh, "-|", "$cmd \Q$file\E"
Signature · 1 line
2.34.1
Re: [PATCH v6 1/2] send-email: refactor header generation functions
Acked by: Luben Tuikov <[email protected]>
Regards,
Luben
Quoted 106 lines · Michael
Split
process_fileandsend_messageinto easier to use functions. Making SMTP header information more widely available.Cc Luben Tuikov <[email protected]>Cc Junio C Hamano <[email protected]>Signed-off-by Michael Strawbridge <[email protected]>--- git-send-email.perl | 49 ++++++++++++++++++++++++++++----------------- 1 file changed, 31 insertions(+), 18 deletions(-)git-send-email.perl +31
-18@@ -1495,16 +1495,7 @@ sub file_name_is_absolute { return File::Spec::Functions::file_name_is_absolute($path); } -# Prepares the email, then asks the user what to do. -# -# If the user chooses to send the email, it's sent and 1 is returned. -# If the user chooses not to send the email, 0 is returned. -# If the user decides they want to make further edits, -1 is returned and the -# caller is expected to call send_message again after the edits are performed. -# -# If an error occurs sending the email, this just dies. - -sub send_message { +sub gen_header { my @recipients = unique_email_list(@to); @cc = (grep { my $cc = extract_valid_address_or_die($_); not grep { $cc eq $_ || $_ =~ /<\Q${cc}\E>$/ } @recipients@@ -1546,6 +1537,22 @@ sub send_message { if (@xh) { $header .= join("\n", @xh) . "\n"; } + my $recipients_ref = \@recipients; + return ($recipients_ref, $to, $date, $gitversion, $cc, $ccline, $header); +} + +# Prepares the email, then asks the user what to do. +# +# If the user chooses to send the email, it's sent and 1 is returned. +# If the user chooses not to send the email, 0 is returned. +# If the user decides they want to make further edits, -1 is returned and the +# caller is expected to call send_message again after the edits are performed. +# +# If an error occurs sending the email, this just dies. + +sub send_message { + my ($recipients_ref, $to, $date, $gitversion, $cc, $ccline, $header) = gen_header(); + my @recipients = @$recipients_ref; my @sendmail_parameters = ('-i', @recipients); my $raw_from = $sender;@@ -1735,11 +1742,8 @@ sub send_message { $references = $initial_in_reply_to || ''; $message_num = 0; -# Prepares the email, prompts the user, sends it out -# Returns 0 if an edit was done and the function should be called again, or 1 -# otherwise. -sub process_file { - my ($t) = @_; +sub pre_process_file { + my ($t, $quiet) = @_; open my $fh, "<", $t or die sprintf(__("can't open file %s"), $t);@@ -1893,9 +1897,9 @@ sub process_file { } close $fh; - push @to, recipients_cmd("to-cmd", "to", $to_cmd, $t) + push @to, recipients_cmd("to-cmd", "to", $to_cmd, $t, $quiet) if defined $to_cmd; - push @cc, recipients_cmd("cc-cmd", "cc", $cc_cmd, $t) + push @cc, recipients_cmd("cc-cmd", "cc", $cc_cmd, $t, $quiet) if defined $cc_cmd && !$suppress_cc{'cccmd'}; if ($broken_encoding{$t} && !$has_content_type) {@@ -1954,6 +1958,15 @@ sub process_file { @initial_to = @to; } } +} + +# Prepares the email, prompts the user, sends it out +# Returns 0 if an edit was done and the function should be called again, or 1 +# otherwise. +sub process_file { + my ($t) = @_; + + pre_process_file($t, $quiet); my $message_was_sent = send_message(); if ($message_was_sent == -1) {@@ -2002,7 +2015,7 @@ sub process_file { # Execute a command (e.g. $to_cmd) to get a list of email addresses # and return a results array sub recipients_cmd { - my ($prefix, $what, $cmd, $file) = @_; + my ($prefix, $what, $cmd, $file, $quiet) = @_; my @addresses = (); open my $fh, "-|", "$cmd \Q$file\E"
Re: [PATCH v6 1/2] send-email: refactor header generation functions
In reply to Strawbridge, MichaelQuoted 2 lines · Michael
Split
process_fileandsend_messageinto easier to use functions. Making SMTP header information more widely available.
"more widely" --> "widely"
Quoted 80 lines
Cc Luben Tuikov <[email protected]>Cc Junio C Hamano <[email protected]>Signed-off-by Michael Strawbridge <[email protected]>--- git-send-email.perl | 49 ++++++++++++++++++++++++++++----------------- 1 file changed, 31 insertions(+), 18 deletions(-)git-send-email.perl +21
-17@@ -1495,16 +1495,7 @@ sub file_name_is_absolute { return File::Spec::Functions::file_name_is_absolute($path); } -# Prepares the email, then asks the user what to do. -# -# If the user chooses to send the email, it's sent and 1 is returned. -# If the user chooses not to send the email, 0 is returned. -# If the user decides they want to make further edits, -1 is returned and the -# caller is expected to call send_message again after the edits are performed. -# -# If an error occurs sending the email, this just dies. - -sub send_message { +sub gen_header { my @recipients = unique_email_list(@to); @cc = (grep { my $cc = extract_valid_address_or_die($_); not grep { $cc eq $_ || $_ =~ /<\Q${cc}\E>$/ } @recipients@@ -1546,6 +1537,22 @@ sub send_message { if (@xh) { $header .= join("\n", @xh) . "\n"; } + my $recipients_ref = \@recipients; + return ($recipients_ref, $to, $date, $gitversion, $cc, $ccline, $header); +} + +# Prepares the email, then asks the user what to do. +# +# If the user chooses to send the email, it's sent and 1 is returned. +# If the user chooses not to send the email, 0 is returned. +# If the user decides they want to make further edits, -1 is returned and the +# caller is expected to call send_message again after the edits are performed. +# +# If an error occurs sending the email, this just dies. + +sub send_message { + my ($recipients_ref, $to, $date, $gitversion, $cc, $ccline, $header) = gen_header(); + my @recipients = @$recipients_ref; my @sendmail_parameters = ('-i', @recipients); my $raw_from = $sender;@@ -1735,11 +1742,8 @@ sub send_message { $references = $initial_in_reply_to || ''; $message_num = 0; -# Prepares the email, prompts the user, sends it out -# Returns 0 if an edit was done and the function should be called again, or 1 -# otherwise. -sub process_file { - my ($t) = @_; +sub pre_process_file { + my ($t, $quiet) = @_; open my $fh, "<", $t or die sprintf(__("can't open file %s"), $t);@@ -1893,9 +1897,9 @@ sub process_file { } close $fh; - push @to, recipients_cmd("to-cmd", "to", $to_cmd, $t) + push @to, recipients_cmd("to-cmd", "to", $to_cmd, $t, $quiet) if defined $to_cmd; - push @cc, recipients_cmd("cc-cmd", "cc", $cc_cmd, $t) + push @cc, recipients_cmd("cc-cmd", "cc", $cc_cmd, $t, $quiet) if defined $cc_cmd && !$suppress_cc{'cccmd'}; if ($broken_encoding{$t} && !$has_content_type) {
git-send-email.perl sub process_file { · line 1963
Quoted 6 lines
git-send-email.perl +3
-0@@ -1954,6 +1958,15 @@ sub process_file { @initial_to = @to; } } +} + +# Prepares the email, prompts the user, sends it out
Perhaps add an "and" as "... user, and sends it out."
git-send-email.perl sub process_file { · line 1965
Quoted 2 lines
git-send-email.perl +2
-0+# Returns 0 if an edit was done and the function should be called again, or 1 +# otherwise.
"otherwise" is usually used on error. Perhaps we want to say here "or 1 on the email being successfully sent out."?
Signature · 2 lines
Regards, Luben
PATCH v6 2/2 send-email: expose header information to git-send-email's sendemail-validate hook
In reply to Strawbridge, MichaelTo allow further flexibility in the git hook, the SMTP header information of the email that git-send-email intends to send, is now passed as a 2nd argument to the sendemail-validate hook.
As an example, this can be useful for acting upon keywords in the subject or specific email addresses.
--- Documentation/githooks.txt | 29 +++++++++++++++++++---- git-send-email.perl | 31 +++++++++++++++++-------- t/t9001-send-email.sh | 47 ++++++++++++++++++++++++++++++++++++-- 3 files changed, 91 insertions(+), 16 deletions(-)
Documentation/githooks.txt +25 -4
@@ -583,10 +583,31 @@ processed by rebase. sendemail-validate ~~~~~~~~~~~~~~~~~~ -This hook is invoked by linkgit:git-send-email[1]. It takes a single parameter, -the name of the file that holds the e-mail to be sent. Exiting with a -non-zero status causes `git send-email` to abort before sending any -e-mails. +This hook is invoked by linkgit:git-send-email[1]. + +It takes these command line arguments: +1. the name of the file that holds the e-mail to be sent. +2. the name of the file that holds the SMTP headers to be used. + +The SMTP headers will be passed to the hook in the below format. +Take notice of the capitalization and multi-line tab structure. + + From: Example <[email protected]> + To: [email protected] + Cc: [email protected], + A <[email protected]>, + One <[email protected]>, + [email protected] + Subject: PATCH-STRING + Date: DATE-STRING + Message-Id: MESSAGE-ID-STRING + X-Mailer: X-MAILER-STRING + Reply-To: Reply <[email protected]> + MIME-Version: 1.0 + Content-Transfer-Encoding: quoted-printable + +Exiting with a non-zero status causes `git send-email` to abort +before sending any e-mails. fsmonitor-watchman ~~~~~~~~~~~~~~~~~~
git-send-email.perl +21 -10
@@ -787,14 +787,6 @@ sub is_format_patch_arg { @files = handle_backup_files(@files); -if ($validate) { - foreach my $f (@files) { - unless (-p $f) { - validate_patch($f, $target_xfer_encoding); - } - } -} - if (@files) { unless ($quiet) { print $_,"\n" for (@files);
@@ -1738,6 +1730,16 @@ sub send_message { return 1; } +if ($validate) { + foreach my $f (@files) { + unless (-p $f) { + pre_process_file($f, 1); + + validate_patch($f, $target_xfer_encoding); + } + } +} + $in_reply_to = $initial_in_reply_to; $references = $initial_in_reply_to || ''; $message_num = 0;
@@ -2101,11 +2103,20 @@ sub validate_patch { chdir($repo->wc_path() or $repo->repo_path()) or die("chdir: $!"); local $ENV{"GIT_DIR"} = $repo->repo_path(); + + my ($recipients_ref, $to, $date, $gitversion, $cc, $ccline, $header) = gen_header(); + + require File::Temp; + my ($header_filehandle, $header_filename) = File::Temp::tempfile( + ".gitsendemail.header.XXXXXX", DIR => $repo->repo_path()); + print $header_filehandle $header; + my @cmd = ("git", "hook", "run", "--ignore-missing", $hook_name, "--"); - my @cmd_msg = (@cmd, "<patch>"); - my @cmd_run = (@cmd, $target); + my @cmd_msg = (@cmd, "<patch>", "<header>"); + my @cmd_run = (@cmd, $target, $header_filename); $hook_error = system_or_msg(\@cmd_run, undef, "@cmd_msg"); + unlink($header_filehandle); chdir($cwd_save) or die("chdir: $!"); } if ($hook_error) {
t/t9001-send-email.sh +45 -2
64 lines not on this page · raw message
Signature · 1 line
2.34.1
Hi Michael,
Good work on this. I've a few tiny notes following.
Quoted 1 line · Michael
To allow further flexibility in the git hook, the SMTP header
"git" is something different. You want to use the capitalization "Git".
Quoted 1 line
information of the email that git-send-email intends to send, is now
"that" --> "which".
Quoted 1 line
passed as a 2nd argument to the sendemail-validate hook.
"a 2nd argument" --> "the 2nd argument".
Quoted 17 lines
As an example, this can be useful for acting upon keywords in the subject or specific email addresses.
Cc Luben Tuikov <[email protected]>Cc Junio C Hamano <[email protected]>Signed-off-by Michael Strawbridge <[email protected]>--- Documentation/githooks.txt | 29 +++++++++++++++++++---- git-send-email.perl | 31 +++++++++++++++++-------- t/t9001-send-email.sh | 47 ++++++++++++++++++++++++++++++++++++-- 3 files changed, 91 insertions(+), 16 deletions(-)Documentation/githooks.txt +0
-0
Documentation/githooks.txt processed by rebase. · line 588
Quoted 10 lines
Documentation/githooks.txt +3
-4@@ -583,10 +583,31 @@ processed by rebase. sendemail-validate ~~~~~~~~~~~~~~~~~~ -This hook is invoked by linkgit:git-send-email[1]. It takes a single parameter, -the name of the file that holds the e-mail to be sent. Exiting with a -non-zero status causes `git send-email` to abort before sending any -e-mails. +This hook is invoked by linkgit:git-send-email[1]. + +It takes these command line arguments:
"It takes two command line arguments. They are,"
Documentation/githooks.txt processed by rebase. · line 589
Quoted 1 line
Documentation/githooks.txt +1
-0+1. the name of the file that holds the e-mail to be sent.
"which holds the contents of the email to be sent." Sentence ends and the next one should be capitalized.
Documentation/githooks.txt processed by rebase. · line 590
Quoted 1 line
Documentation/githooks.txt +1
-0+2. the name of the file that holds the SMTP headers to be used.
"The name of the file which holds the SMTP envelope and headers of the email."
Documentation/githooks.txt processed by rebase. · line 593
Quoted 3 lines
Documentation/githooks.txt +3
-0+ +The SMTP headers will be passed to the hook in the below format. +Take notice of the capitalization and multi-line tab structure.
Always use present simple tense when describing mechanics of code, not future tense, "are passed". Think of when the user is reading this long after the patch went in.
Also, please use "the format below."
Documentation/githooks.txt processed by rebase. · line 607
Quoted 13 lines
Documentation/githooks.txt +13
-0+ From: Example <[email protected]> + To: [email protected] + Cc: [email protected], + A <[email protected]>, + One <[email protected]>, + [email protected] + Subject: PATCH-STRING + Date: DATE-STRING + Message-Id: MESSAGE-ID-STRING + X-Mailer: X-MAILER-STRING + Reply-To: Reply <[email protected]> + MIME-Version: 1.0 + Content-Transfer-Encoding: quoted-printable
Perhaps this is too much detail and unnecessary for the generalization we're trying to achieve here?
Maybe the following would suffice?
The SMTP envelope and headers are passed as the 2nd argument to the hook, exactly as they are passed to the user's Mail Transport Agent (MTA). In effect, the email given to the user's MTA, is the contents of $2 followed by the contents of $1.
Signature · 2 lines
Regards, Luben
Hi Michael,
On 2023-01-16 20:39, Strawbridge, Michael wrote:
--[cut]--
Quoted 60 lines
t/t9001-send-email.sh +38
-2@@ -540,7 +540,7 @@ test_expect_success $PREREQ "--validate respects relative core.hooksPath path" ' test_path_is_file my-hooks.ran && cat >expect <<-EOF && fatal: longline.patch: rejected by sendemail-validate hook - fatal: command '"'"'git hook run --ignore-missing sendemail-validate -- <patch>'"'"' died with exit code 1 + fatal: command '"'"'git hook run --ignore-missing sendemail-validate -- <patch> <header>'"'"' died with exit code 1 warning: no patches were sent EOF test_cmp expect actual@@ -559,12 +559,55 @@ test_expect_success $PREREQ "--validate respects absolute core.hooksPath path" ' test_path_is_file my-hooks.ran && cat >expect <<-EOF && fatal: longline.patch: rejected by sendemail-validate hook - fatal: command '"'"'git hook run --ignore-missing sendemail-validate -- <patch>'"'"' died with exit code 1 + fatal: command '"'"'git hook run --ignore-missing sendemail-validate -- <patch> <header>'"'"' died with exit code 1 warning: no patches were sent EOF test_cmp expect actual ' +test_expect_success $PREREQ 'setup expect' " +cat >expected-headers <<\EOF +From: Example <[email protected]> +To: [email protected] +Cc: [email protected], + A <[email protected]>, + One <[email protected]>, + [email protected] +Subject: [PATCH 1/1] Second. +Date: DATE-STRING +Message-Id: MESSAGE-ID-STRING +X-Mailer: X-MAILER-STRING +Reply-To: Reply <[email protected]> +MIME-Version: 1.0 +Content-Transfer-Encoding: quoted-printable +EOF +" + +test_expect_success $PREREQ "--validate hook supports header argument" ' + write_script my-hooks/sendemail-validate <<-\EOF && + if test -s "$2" + then + cat "$2" >actual + exit 1 + fi + EOF + test_config core.hooksPath "my-hooks" && + test_must_fail git send-email \ + --dry-run \ + --suppress-cc=sob \ + --from="Example <[email protected]>" \ + --reply-to="Reply <[email protected]>" \ + [email protected] \ + [email protected] \ + [email protected] \ + --smtp-server="$(pwd)/fake.sendmail" \
t/t9001-send-email.sh test_expect_success $PREREQ "--validate respects absolute core.hooksPath path" ' · line 613
Quoted 10 lines
t/t9001-send-email.sh +7
-0+ --validate \ + longline.patch && + cat actual | replace_variable_fields \ + >actual-headers && + test_cmp expected-headers actual-headers +' + for enc in 7bit 8bit quoted-printable base64 do test_expect_success $PREREQ "--transfer-encoding=$enc produces correct header" '
As Junio and I discussed in the v5 2/2 patch review, here we may want to do something like this: Add a custom header to the SMTP envelope and then make sure that that is present when the hook checks $2.
To add a custom header, (and this uses real-world data, which is good), use the following:
git format-patch --stdout --add-header="X-test-header: v1.0" HEAD^..HEAD > /tmp/some-temp-file
Then the hook verifies that "X-test-header: v1.0" is present in $2, when git-send-email is run with /tmp/some-temp-file.
Signature · 2 lines
Regards, Luben
Quoted 8 lines · Luben Tuikov
t/t9001-send-email.sh test_expect_success $PREREQ "--validate respects absolute core.hooksPath path" ' · line 593
Quoted 8 lines
t/t9001-send-email.sh +8
-0+test_expect_success $PREREQ "--validate hook supports header argument" ' + write_script my-hooks/sendemail-validate <<-\EOF && + if test -s "$2" + then + cat "$2" >actual + exit 1 + fi + EOF
If "$2" is not given, or an empty "$2" is given, is that an error? I am wondering if the lack of "else" clause (and the hook exits with success when "$2" is an empty file) here is intentional.
Quoted 2 lines
t/t9001-send-email.sh test_expect_success $PREREQ "--validate respects absolute core.hooksPath path" ' · line 607
Quoted 2 lines
t/t9001-send-email.sh +2
-0+ cat actual | replace_variable_fields \ + >actual-headers &&
Do not cat a single file into a pipe. You can instead redirect out of the file to whatever is reading from the pipe. I.e.
replace_variable_fields <actual >actual-headers &&
Quoted 2 lines
t/t9001-send-email.sh test_expect_success $PREREQ "--validate respects absolute core.hooksPath path" ' · line 609
Quoted 2 lines
t/t9001-send-email.sh +2
-0+ test_cmp expected-headers actual-headers +'
OK. We make sure the presence and the order of the fields in the output just like all the other tests in this file do (which I think may be a bit too much---there is no strong reason to insist that "Subject:" comes before or after "Date:" or is spelled "Subject:" and not "subject:" or "SUBJECT:"---but that is a problem shared with many other existing tests in this file and this patch is not making it much worse).
Quoted 7 lines
Quoted 3 lines
for enc in 7bit 8bit quoted-printable base64
do
test_expect_success$PREREQ "--transfer-encoding=$enc produces correct header" 'As Junio and I discussed in the v5 2/2 patch review, here we may want to do something like this: Add a custom header to the SMTP envelope and then make sure that that is present when the hook checks $2.
Adding a custom header test is also fine, but I am OK with what we see above, to verify the headers just the same way as existing tests.
Quoted 14 lines · Junio C Hamano
Quoted 8 lines · Luben Tuikov
t/t9001-send-email.sh test_expect_success $PREREQ "--validate respects absolute core.hooksPath path" ' · line 593
Quoted 8 lines
t/t9001-send-email.sh +8
-0+test_expect_success $PREREQ "--validate hook supports header argument" ' + write_script my-hooks/sendemail-validate <<-\EOF && + if test -s "$2" + then + cat "$2" >actual + exit 1 + fi + EOFIf "$2" is not given, or an empty "$2" is given, is that an error? I am wondering if the lack of "else" clause (and the hook exits with success when "$2" is an empty file) here is intentional.
I think we'll always have a $2, since it is the SMTP envelope and headers.
For the rest of the comments, I'll let Michael address them.
Signature · 2 lines
Regards, Luben
Quoted 16 lines · Luben Tuikov
Quoted 14 lines · Junio C Hamano
Quoted 8 lines · Luben Tuikov
t/t9001-send-email.sh test_expect_success $PREREQ "--validate respects absolute core.hooksPath path" ' · line 593
Quoted 8 lines
t/t9001-send-email.sh +8
-0+test_expect_success $PREREQ "--validate hook supports header argument" ' + write_script my-hooks/sendemail-validate <<-\EOF && + if test -s "$2" + then + cat "$2" >actual + exit 1 + fi + EOFIf "$2" is not given, or an empty "$2" is given, is that an error? I am wondering if the lack of "else" clause (and the hook exits with success when "$2" is an empty file) here is intentional.
Quoted 1 line
I think we'll always have a $2, since it is the SMTP envelope and headers.
We write our tests to verify _that_ assumption you have. A future developer mistakenly drops the code to append the file to the command line that invokes the hook, and we want our test to catch such a mistake.
Do we really feed envelope? E.g. if the --envelope-sender=<who> is used, does $2 have the "From:" from the header and "MAIL TO" from the envelope separately?
Quoted 20 lines · Junio C Hamano
Quoted 16 lines · Luben Tuikov
Quoted 14 lines · Junio C Hamano
Quoted 8 lines · Luben Tuikov
t/t9001-send-email.sh test_expect_success $PREREQ "--validate respects absolute core.hooksPath path" ' · line 593
Quoted 8 lines
t/t9001-send-email.sh +8
-0+test_expect_success $PREREQ "--validate hook supports header argument" ' + write_script my-hooks/sendemail-validate <<-\EOF && + if test -s "$2" + then + cat "$2" >actual + exit 1 + fi + EOFIf "$2" is not given, or an empty "$2" is given, is that an error? I am wondering if the lack of "else" clause (and the hook exits with success when "$2" is an empty file) here is intentional.
Quoted 1 line
I think we'll always have a $2, since it is the SMTP envelope and headers.
Quoted 8 lines
We write our tests to verify _that_ assumption you have. A future developer mistakenly drops the code to append the file to the command line that invokes the hook, and we want our test to catch such a mistake.
Do we really feed envelope? E.g. if the --envelope-sender=<who> is used, does $2 have the "From:" from the header and "MAIL TO" from the envelope separately?
I'm not sure--I thought we did, but yes, we should _test_ that we indeed
1) have/get $2, as a non-empty string,
2) it is a non-empty, readable file,
3) contains the test header we included in git-format-patch in the test.
This is what I meant when I wrote "we'll always have $2 ...", not having it is failure of some kind and yes we should test for it.
Signature · 2 lines
Regards, Luben
Quoted 26 lines · Luben Tuikov
Quoted 17 lines · Junio C Hamano
Quoted 14 lines · Luben Tuikov
Quoted 13 lines · Junio C Hamano
Quoted 8 lines · Luben Tuikov
t/t9001-send-email.sh test_expect_success $PREREQ "--validate respects absolute core.hooksPath path" ' · line 593
Quoted 8 lines
t/t9001-send-email.sh +8
-0+test_expect_success $PREREQ "--validate hook supports header argument" ' + write_script my-hooks/sendemail-validate <<-\EOF && + if test -s "$2" + then + cat "$2" >actual + exit 1 + fi + EOFIf "$2" is not given, or an empty "$2" is given, is that an error? I am wondering if the lack of "else" clause (and the hook exits with success when "$2" is an empty file) here is intentional.
Quoted 1 line
I think we'll always have a $2, since it is the SMTP envelope and headers.
Quoted 8 lines
We write our tests to verify _that_ assumption you have. A future developer mistakenly drops the code to append the file to the command line that invokes the hook, and we want our test to catch such a mistake.
Do we really feed envelope? E.g. if the --envelope-sender=<who> is used, does $2 have the "From:" from the header and "MAIL TO" from the envelope separately?
Quoted 7 lines
I'm not sure--I thought we did, but yes, we should _test_ that we indeed
1) have/get $2, as a non-empty string,
2) it is a non-empty, readable file,
3) contains the test header we included in git-format-patch in the test.This is what I meant when I wrote "we'll always have $2 ...", not having it is failure of some kind and yes we should test for it.
I've tested using the envelope-sender=<who> and the hook only gets the headers. I've applied the feedback above in patch set v8 including a test for the 2nd argument. The new test will fail if either the supplied argument is not a file or the custom header is not found.