Skip to contentSkip to conversation

hwmon: (asus-ec-sensors) sort sensor definition arrays

PATCH In review Eugene Shalygin 2 participants 2 messages Apr 8, 2025 – Apr 9, 2025

Subsystems (2)
lore
Share & tools
lore

Eugene Shalygin

author maintainer
#0 lore raw

PATCH 1/1 hwmon: (asus-ec-sensors) sort sensor definition arrays

The arrays have to be sorted by the sensor register bank and index because this is what the sensor reading function expects. So sort them and leave a comment for future contributors.

---
 drivers/hwmon/asus-ec-sensors.c | 20 ++++++++++++--------
 1 file changed, 12 insertions(+), 8 deletions(-)
drivers/hwmon/asus-ec-sensors.c +12 -8
index 006ced5ab6e6..ec428c5e97d4 100644
@@ -169,7 +169,10 @@ enum board_family {
 	family_intel_600_series
 };
 
-/* All the known sensors for ASUS EC controllers */
+/* All the known sensors for ASUS EC controllers. These arrays have to be sorted
+ * by the full ((bank << 8) + index) register index (see asus_ec_block_read() as
+ * to why).
+*/
 static const struct ec_sensor_info sensors_family_amd_400[] = {
 	[ec_sensor_temp_chipset] =
 		EC_SENSOR("Chipset", hwmon_temp, 1, 0x00, 0x3a),
@@ -183,10 +186,10 @@ static const struct ec_sensor_info sensors_family_amd_400[] = {
 		EC_SENSOR("VRM", hwmon_temp, 1, 0x00, 0x3e),
 	[ec_sensor_in_cpu_core] =
 		EC_SENSOR("CPU Core", hwmon_in, 2, 0x00, 0xa2),
-	[ec_sensor_fan_cpu_opt] =
-		EC_SENSOR("CPU_Opt", hwmon_fan, 2, 0x00, 0xbc),
 	[ec_sensor_fan_vrm_hs] =
 		EC_SENSOR("VRM HS", hwmon_fan, 2, 0x00, 0xb2),
+	[ec_sensor_fan_cpu_opt] =
+		EC_SENSOR("CPU_Opt", hwmon_fan, 2, 0x00, 0xbc),
 	[ec_sensor_fan_chipset] =
 		/* no chipset fans in this generation */
 		EC_SENSOR("Chipset", hwmon_fan, 0, 0x00, 0x00),
@@ -194,10 +197,10 @@ static const struct ec_sensor_info sensors_family_amd_400[] = {
 		EC_SENSOR("Water_Flow", hwmon_fan, 2, 0x00, 0xb4),
 	[ec_sensor_curr_cpu] =
 		EC_SENSOR("CPU", hwmon_curr, 1, 0x00, 0xf4),
-	[ec_sensor_temp_water_in] =
-		EC_SENSOR("Water_In", hwmon_temp, 1, 0x01, 0x0d),
 	[ec_sensor_temp_water_out] =
 		EC_SENSOR("Water_Out", hwmon_temp, 1, 0x01, 0x0b),
+	[ec_sensor_temp_water_in] =
+		EC_SENSOR("Water_In", hwmon_temp, 1, 0x01, 0x0d),
 };
 
 static const struct ec_sensor_info sensors_family_amd_500[] = {
@@ -239,19 +242,20 @@ static const struct ec_sensor_info sensors_family_amd_500[] = {
 
 static const struct ec_sensor_info sensors_family_amd_600[] = {
 	[ec_sensor_temp_cpu] = EC_SENSOR("CPU", hwmon_temp, 1, 0x00, 0x30),
-	[ec_sensor_temp_cpu_package] = EC_SENSOR("CPU Package", hwmon_temp, 1, 0x00, 0x31),
+	[ec_sensor_temp_cpu_package] =
+		EC_SENSOR("CPU Package", hwmon_temp, 1, 0x00, 0x31),
 	[ec_sensor_temp_mb] =
 	EC_SENSOR("Motherboard", hwmon_temp, 1, 0x00, 0x32),
 	[ec_sensor_temp_vrm] =
 		EC_SENSOR("VRM", hwmon_temp, 1, 0x00, 0x33),
 	[ec_sensor_temp_t_sensor] =
 		EC_SENSOR("T_Sensor", hwmon_temp, 1, 0x00, 0x36),
+	[ec_sensor_fan_cpu_opt] =
+		EC_SENSOR("CPU_Opt", hwmon_fan, 2, 0x00, 0xb0),
 	[ec_sensor_temp_water_in] =
 		EC_SENSOR("Water_In", hwmon_temp, 1, 0x01, 0x00),
 	[ec_sensor_temp_water_out] =
 		EC_SENSOR("Water_Out", hwmon_temp, 1, 0x01, 0x01),
-	[ec_sensor_fan_cpu_opt] =
-		EC_SENSOR("CPU_Opt", hwmon_fan, 2, 0x00, 0xb0),
 };
 
 static const struct ec_sensor_info sensors_family_intel_300[] = {
Signature · 1 line
2.49.0
maintainer
#1 lore raw
Quoted 14 lines · Eugene Shalygin

The arrays have to be sorted by the sensor register bank and index because this is what the sensor reading function expects. So sort them and leave a comment for future contributors.

---
 drivers/hwmon/asus-ec-sensors.c | 20 ++++++++++++--------
 1 file changed, 12 insertions(+), 8 deletions(-)
drivers/hwmon/asus-ec-sensors.c +0 -0
index 006ced5ab6e6..ec428c5e97d4 100644

drivers/hwmon/asus-ec-sensors.c enum board_family { · line 175

Quoted 8 lines
drivers/hwmon/asus-ec-sensors.c +4 -1
@@ -169,7 +169,10 @@ enum board_family {
 	family_intel_600_series
 };
 
-/* All the known sensors for ASUS EC controllers */
+/* All the known sensors for ASUS EC controllers. These arrays have to be sorted
+ * by the full ((bank << 8) + index) register index (see asus_ec_block_read() as
+ * to why).
+*/

WARNING: Block comments should align the * on each line #123: FILE: drivers/hwmon/asus-ec-sensors.c:175:
+ * to why).
+*/

I'll fix that up and apply the patch, but _please_ run checkpatch on your patches.

Also, this is not the network subsystem. Please use standard multi-line comments.

Guenter

Quoted 53 lines
drivers/hwmon/asus-ec-sensors.c +8 -7
 static const struct ec_sensor_info sensors_family_amd_400[] = {
 	[ec_sensor_temp_chipset] =
 		EC_SENSOR("Chipset", hwmon_temp, 1, 0x00, 0x3a),
@@ -183,10 +186,10 @@ static const struct ec_sensor_info sensors_family_amd_400[] = {
 		EC_SENSOR("VRM", hwmon_temp, 1, 0x00, 0x3e),
 	[ec_sensor_in_cpu_core] =
 		EC_SENSOR("CPU Core", hwmon_in, 2, 0x00, 0xa2),
-	[ec_sensor_fan_cpu_opt] =
-		EC_SENSOR("CPU_Opt", hwmon_fan, 2, 0x00, 0xbc),
 	[ec_sensor_fan_vrm_hs] =
 		EC_SENSOR("VRM HS", hwmon_fan, 2, 0x00, 0xb2),
+	[ec_sensor_fan_cpu_opt] =
+		EC_SENSOR("CPU_Opt", hwmon_fan, 2, 0x00, 0xbc),
 	[ec_sensor_fan_chipset] =
 		/* no chipset fans in this generation */
 		EC_SENSOR("Chipset", hwmon_fan, 0, 0x00, 0x00),
@@ -194,10 +197,10 @@ static const struct ec_sensor_info sensors_family_amd_400[] = {
 		EC_SENSOR("Water_Flow", hwmon_fan, 2, 0x00, 0xb4),
 	[ec_sensor_curr_cpu] =
 		EC_SENSOR("CPU", hwmon_curr, 1, 0x00, 0xf4),
-	[ec_sensor_temp_water_in] =
-		EC_SENSOR("Water_In", hwmon_temp, 1, 0x01, 0x0d),
 	[ec_sensor_temp_water_out] =
 		EC_SENSOR("Water_Out", hwmon_temp, 1, 0x01, 0x0b),
+	[ec_sensor_temp_water_in] =
+		EC_SENSOR("Water_In", hwmon_temp, 1, 0x01, 0x0d),
 };
 
 static const struct ec_sensor_info sensors_family_amd_500[] = {
@@ -239,19 +242,20 @@ static const struct ec_sensor_info sensors_family_amd_500[] = {
 
 static const struct ec_sensor_info sensors_family_amd_600[] = {
 	[ec_sensor_temp_cpu] = EC_SENSOR("CPU", hwmon_temp, 1, 0x00, 0x30),
-	[ec_sensor_temp_cpu_package] = EC_SENSOR("CPU Package", hwmon_temp, 1, 0x00, 0x31),
+	[ec_sensor_temp_cpu_package] =
+		EC_SENSOR("CPU Package", hwmon_temp, 1, 0x00, 0x31),
 	[ec_sensor_temp_mb] =
 	EC_SENSOR("Motherboard", hwmon_temp, 1, 0x00, 0x32),
 	[ec_sensor_temp_vrm] =
 		EC_SENSOR("VRM", hwmon_temp, 1, 0x00, 0x33),
 	[ec_sensor_temp_t_sensor] =
 		EC_SENSOR("T_Sensor", hwmon_temp, 1, 0x00, 0x36),
+	[ec_sensor_fan_cpu_opt] =
+		EC_SENSOR("CPU_Opt", hwmon_fan, 2, 0x00, 0xb0),
 	[ec_sensor_temp_water_in] =
 		EC_SENSOR("Water_In", hwmon_temp, 1, 0x01, 0x00),
 	[ec_sensor_temp_water_out] =
 		EC_SENSOR("Water_Out", hwmon_temp, 1, 0x01, 0x01),
-	[ec_sensor_fan_cpu_opt] =
-		EC_SENSOR("CPU_Opt", hwmon_fan, 2, 0x00, 0xb0),
 };
 
 static const struct ec_sensor_info sensors_family_intel_300[] = {