usb: typec: fixes for Cherry Trails
Subsystems (5)
Heikki Krogerus
maintainerv3 cover usb: typec: fixes for Cherry Trails
Hi,
This is third version of patches that fix various problems I encountered while testing my USB Type-C Alternate Mode patches with GPD Win board (Intel Cherry Trail based).
I added one more patch to this series. Sathyanarayanan reported an issue where the mux does not get configured when xHCI is suspended. To fix that we need to enable runtime PM in the mux driver.
Other changes since v2: constifying struct usb_role_switch_desc sw_desc, and improvements to the commit messages.
Link to the original patches:
https://lkml.org/lkml/2018/4/30/350
Heikki Krogerus (4):
usb: roles: intel_xhci: Always allow user control
platform: x86: intel_cht_int33fe: Fix dependencies
usb: typec: fusb302: Fix debugfs issue
usb: roles: intel_xhci: Enable runtime PM
drivers/i2c/busses/Kconfig | 3 +- drivers/platform/x86/Kconfig | 4 +- .../usb/roles/intel-xhci-usb-role-switch.c | 37 ++++++++----------- drivers/usb/typec/fusb302/fusb302.c | 1 + 4 files changed, 19 insertions(+), 26 deletions(-)
Signature · 1 line
2.17.0
Heikki Krogerus
maintainerPATCH v3 1/4 usb: roles: intel_xhci: Always allow user control
Trying to determine the USB port type with this mux is very difficult. To simplify the situation, always allow user control, even if the port is USB Type-C port.
--- .../usb/roles/intel-xhci-usb-role-switch.c | 23 ++----------------- 1 file changed, 2 insertions(+), 21 deletions(-)
drivers/usb/roles/intel-xhci-usb-role-switch.c +2 -21
@@ -38,20 +38,6 @@ struct intel_xhci_usb_data {void __iomem *base; }; -struct intel_xhci_acpi_match { -const char *hid; -int hrv; -}; - -/* -* ACPI IDs for PMICs which do not support separate data and power role -* detection (USB ACA detection for micro USB OTG), we allow userspace to -* change the role manually on these. -*/ -static const struct intel_xhci_acpi_match allow_userspace_ctrl_ids[] = { - {"INT33F4" ,3 },/* X-Powers AXP288 PMIC */ -}; -static int intel_xhci_usb_set_role (struct device *dev,enum usb_role role) {struct intel_xhci_usb_data *data =dev_get_drvdata (dev);
@@ -127,9 +113,10 @@ static enum usb_role intel_xhci_usb_get_role(struct device *dev)return role; } -static struct usb_role_switch_desc sw_desc = { +static const struct usb_role_switch_desc sw_desc = { .set = intel_xhci_usb_set_role, .get = intel_xhci_usb_get_role, + .allow_userspace_control = true, };static int intel_xhci_usb_probe (struct platform_device *pdev)
@@ -137,7 +124,6 @@ static int intel_xhci_usb_probe(struct platform_device *pdev)struct device *dev = &pdev->dev;struct intel_xhci_usb_data *data;struct resource *res; -int i; data =devm_kzalloc (dev,sizeof (*data),GFP_KERNEL );if (!data)
@@ -150,11 +136,6 @@ static int intel_xhci_usb_probe(struct platform_device *pdev)if (!data->base)return -ENOMEM ; -for (i =0 ; i <ARRAY_SIZE (allow_userspace_ctrl_ids); i++) -if (acpi_dev_present (allow_userspace_ctrl_ids[i].hid,"1" , - allow_userspace_ctrl_ids[i].hrv)) - sw_desc.allow_userspace_control = true; -platform_set_drvdata (pdev, data); data->role_sw =usb_role_switch_register (dev, &sw_desc);
Heikki Krogerus
maintainerPATCH v3 2/4 platform: x86: intel_cht_int33fe: Fix dependencies
In reply to Heikki KrogerusThe driver will not probe unless bq24190 is loaded, so making it a dependency.
--- drivers/i2c/busses/Kconfig | 3 +-- drivers/platform/x86/Kconfig | 4 ++-- 2 files changed, 3 insertions(+), 4 deletions(-)
drivers/i2c/busses/Kconfig +1 -2
@@ -202,8 +202,7 @@ config I2C_CHT_WC Note this controller is hooked up to a TI bq24292i charger-IC, combined with a FUSB302 Type-C port-controller as such it is advised - to also select CONFIG_CHARGER_BQ24190=m and CONFIG_TYPEC_FUSB302=m - (the fusb302 driver currently is in drivers/staging). + to also select CONFIG_TYPEC_FUSB302=m. config I2C_NFORCE2 tristate "Nvidia nForce2, nForce3 and nForce4"
drivers/platform/x86/Kconfig +2 -2
@@ -866,6 +866,7 @@ config ACPI_CMPC config INTEL_CHT_INT33FE tristate "Intel Cherry Trail ACPI INT33FE Driver" depends on X86 && ACPI && I2C && REGULATOR + depends on CHARGER_BQ24190=y || (CHARGER_BQ24190=m && m) ---help--- This driver add support for the INT33FE ACPI device found on some Intel Cherry Trail devices.
@@ -877,8 +878,7 @@ config INTEL_CHT_INT33FE i2c drivers for these chips can bind to the them. If you enable this driver it is advised to also select - CONFIG_TYPEC_FUSB302=m, CONFIG_CHARGER_BQ24190=m and - CONFIG_BATTERY_MAX17042=m. + CONFIG_TYPEC_FUSB302=m and CONFIG_BATTERY_MAX17042=m. config INTEL_INT0002_VGPIO tristate "Intel ACPI INT0002 Virtual GPIO driver"
Heikki Krogerus
maintainerPATCH v3 3/4 usb: typec: fusb302: Fix debugfs issue
In reply to Heikki KrogerusRemoving the "fusb302" debugfs directory when unloading the driver. That allows the driver to be loaded more then one time. The directory will not get actually removed until it is empty, so only after the last instance has been removed.
This fixes an issue where the driver can't be re-loaded if it has been unloaded as the "fusb302" debugfs directory already exists.
--- drivers/usb/typec/fusb302/fusb302.c | 1 + 1 file changed, 1 insertion(+)
drivers/usb/typec/fusb302/fusb302.c +1 -0
@@ -234,6 +234,7 @@ static int fusb302_debugfs_init(struct fusb302_chip *chip)static void fusb302_debugfs_exit (struct fusb302_chip *chip) {debugfs_remove (chip->dentry); +debugfs_remove (rootdir); }#else
Re: [PATCH v3 3/4] usb: typec: fusb302: Fix debugfs issue
Quoted 6 lines · Heikki Krogerus
Removing the "fusb302" debugfs directory when unloading the driver. That allows the driver to be loaded more then one time. The directory will not get actually removed until it is empty, so only after the last instance has been removed.
Quoted 6 lines
This fixes an issue where the driver can't be re-loaded if it has been unloaded as the "fusb302" debugfs directory already exists.
Fixes 76f0c53d08b9 ("usb: typec: fusb302: Move out of staging")Signed-off-by Heikki Krogerus <[email protected]>
Quoted 10 lines
--- drivers/usb/typec/fusb302/fusb302.c | 1 + 1 file changed, 1 insertion(+)drivers/usb/typec/fusb302/fusb302.c +0
-0
drivers/usb/typec/fusb302/fusb302.c static int fusb302_debugfs_init(struct fusb302_chip *chip) · line 240
Quoted 7 lines
drivers/usb/typec/fusb302/fusb302.c +1
-0@@ -234,6 +234,7 @@ static int fusb302_debugfs_init(struct fusb302_chip *chip)static void fusb302_debugfs_exit (struct fusb302_chip *chip) {debugfs_remove (chip->dentry); +debugfs_remove (rootdir); }#else
---
To unsubscribe from this list: send the line "unsubscribe linux-usb" in the body of a message to [email protected]
More majordomo info at http://vger.kernel.org/majordomo-info.html
Heikki Krogerus
maintainerPATCH v3 4/4 usb: roles: intel_xhci: Enable runtime PM
In reply to Heikki KrogerusThis fixes an issue where the mux does not get configured when the parent device is suspended. The registers for this mux are mapped to the parent device MMIO (usually xHCI PCI device), so in order for the driver to be able to program the registers, the parent device must be resumed.
--- drivers/usb/roles/intel-xhci-usb-role-switch.c | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-)
drivers/usb/roles/intel-xhci-usb-role-switch.c +13 -1
@@ -18,6 +18,7 @@#include <linux/kernel.h> #include <linux/module.h> #include <linux/platform_device.h> +#include <linux/pm_runtime.h> #include <linux/usb/role.h> /* register definition */
@@ -56,6 +57,8 @@ static int intel_xhci_usb_set_role(struct device *dev, enum usb_role role)return -EIO ; } +pm_runtime_get_sync (dev); +/* Set idpin value as requested */ val =readl (data->base +DUAL_ROLE_CFG0 );switch (role) {
@@ -84,13 +87,17 @@ static int intel_xhci_usb_set_role(struct device *dev, enum usb_role role)/* Polling on CFG1 register to confirm mode switch.*/ do { val =readl (data->base +DUAL_ROLE_CFG1 ); -if (!!(val &HOST_MODE ) == (role ==USB_ROLE_HOST )) +if (!!(val &HOST_MODE ) == (role ==USB_ROLE_HOST )) { +pm_runtime_put (dev);return 0 ; + }/* Interval for polling is set to about 5 - 10 ms */ usleep_range (5000 ,10000 ); }while (time_before (jiffies, timeout)); +pm_runtime_put (dev); +dev_warn (dev,"Timeout waiting for role-switch\n" );return -ETIMEDOUT ; }
@@ -101,7 +108,9 @@ static enum usb_role intel_xhci_usb_get_role(struct device *dev)enum usb_role role;u32 val; +pm_runtime_get_sync (dev); val =readl (data->base +DUAL_ROLE_CFG0 ); +pm_runtime_put (dev);if (!(val &SW_IDPIN )) role =USB_ROLE_HOST ;
@@ -142,6 +151,9 @@ static int intel_xhci_usb_probe(struct platform_device *pdev)if (IS_ERR (data->role_sw))return PTR_ERR (data->role_sw); +pm_runtime_set_active (dev); +pm_runtime_enable (dev); +return 0 ; }
Re: [PATCH v3 4/4] usb: roles: intel_xhci: Enable runtime PM
Hi,
Quoted 9 lines · Heikki Krogerus
This fixes an issue where the mux does not get configured when the parent device is suspended. The registers for this mux are mapped to the parent device MMIO (usually xHCI PCI device), so in order for the driver to be able to program the registers, the parent device must be resumed.
Reported-by Sathyanarayanan Kuppuswamy <[email protected]>Fixes f6fb9ec02be1 ("usb: roles: Add Intel xHCI USB role switch driver")Signed-off-by Heikki Krogerus <[email protected]>
Tested-by: Kuppuswamy Sathyanarayanan
<[email protected]>
Quoted 64 lines
--- drivers/usb/roles/intel-xhci-usb-role-switch.c | 14 +++++++++++++- 1 file changed, 13 insertions(+), 1 deletion(-)drivers/usb/roles/intel-xhci-usb-role-switch.c +13
-1@@ -18,6 +18,7 @@#include <linux/kernel.h> #include <linux/module.h> #include <linux/platform_device.h> +#include <linux/pm_runtime.h> #include <linux/usb/role.h> /* register definition */ @@ -56,6 +57,8 @@ static int intel_xhci_usb_set_role(struct device *dev, enum usb_role role)return -EIO ; } +pm_runtime_get_sync (dev); +/* Set idpin value as requested */ val =readl (data->base +DUAL_ROLE_CFG0 );switch (role) {@@ -84,13 +87,17 @@ static int intel_xhci_usb_set_role(struct device *dev, enum usb_role role)/* Polling on CFG1 register to confirm mode switch.*/ do { val =readl (data->base +DUAL_ROLE_CFG1 ); -if (!!(val &HOST_MODE ) == (role ==USB_ROLE_HOST )) +if (!!(val &HOST_MODE ) == (role ==USB_ROLE_HOST )) { +pm_runtime_put (dev);return 0 ; + }/* Interval for polling is set to about 5 - 10 ms */ usleep_range (5000 ,10000 ); }while (time_before (jiffies, timeout)); +pm_runtime_put (dev); +dev_warn (dev,"Timeout waiting for role-switch\n" );return -ETIMEDOUT ; }@@ -101,7 +108,9 @@ static enum usb_role intel_xhci_usb_get_role(struct device *dev)enum usb_role role;u32 val; +pm_runtime_get_sync (dev); val =readl (data->base +DUAL_ROLE_CFG0 ); +pm_runtime_put (dev);if (!(val &SW_IDPIN )) role =USB_ROLE_HOST ;@@ -142,6 +151,9 @@ static int intel_xhci_usb_probe(struct platform_device *pdev)if (IS_ERR (data->role_sw))return PTR_ERR (data->role_sw); +pm_runtime_set_active (dev); +pm_runtime_enable (dev); +return 0 ; }