Skip to contentSkip to conversation

SAMA7D65 SoC I3C controller driver

RFC [email protected] 1 participant 1 message Jul 30, 2025 I3C

lore
Share & tools
lore
#0 lore raw

Hi All,

We have an I3C controller in SAMA7D65 SoC based on ARM-Cortex A7. I am trying to add driver support for I3C controller which is based on mipi-hci spec 1.0 version of synopsys IP.  Supported driver for this IP is drivers/i3c/master/mipi-i3c-hci/core.c. We are using LSM6DSO IMU sensor as I3C slave device for verifying the common command codes (CCC) and I3C messages. Enabled the following configs in the kernel and added the I3C controller & I3C slave node in the device tree. With this kernel image, we are able successfully probe the mipi-i3c-hci driver. The host & slave controller devices are created as 0-208006c100b/ & e9000000.i3c/. So I hope RSTDAA, DISEC, DAA and configuring the I3C slave device by the I3C host controller is fine.

Kernel config:
CONFIG_I3C=y
CONFIG_MIPI_I3C_HCI=y

Device tree:
compatible = "mipi-i3c-hci";

Though we used synopsys IP,  we don't have support for DMA and few other register configurations like lets say setting endianess, setting command version and so on. So, I have to remove and modify these in the existing driver to make it work for our SoC. So, what i did was, i have created a copy of core.c file and included all the related dependent functions used in other files (pio.c, cmd_v1.c, dat_v1.c etc) in the same file. Created as a separate platform driver to support the i3c controller  in the path drivers/i3c/master/mchp-i3c-master.c.

So my query here are,

1.
Whether this approach is correct or not.
2.
Instead of creating a new driver file, shall we introduce a quirck for Microchip I3C and integrate the changes in the existing driver.

Please suggest us the best way to provide support for the SAMA7D65 I3C in kernel.

Signature · 3 lines
linux-i3c mailing list
[email protected]
http://lists.infradead.org/mailman/listinfo/linux-i3c