Skip to contentSkip to conversation

Add support for AT_INTERPRETED (was O_MAYEXEC)

RFC PATCH In review Mickaël Salaün 7 participants 24 messages Sep 8, 2020 – Sep 12, 2020

Subsystems (8)
lore
Share & tools
lore
#0 lore raw

v8 cover Add support for AT_INTERPRETED (was O_MAYEXEC)

Hi,

This height patch series rework the previous O_MAYEXEC series by not adding a new flag to openat2(2) but to faccessat2(2) instead. As suggested, this enables to perform the access check on a file descriptor instead of on a file path (while opening it). This may require two checks (one on open and then with faccessat2) but it is a more generic approach [8].

The IMA patch is removed for now because the only LSM hook triggered by faccessat2(2) is inode_permission() which takes a struct inode as argument. However, struct path and then struct file are still available in this syscall, which enables to add a new hook to fit the needs of IMA and other path-based LSMs.

We also removed the three patches from Kees Cook which are no longer required for this new implementation.

Goal of AT_INTERPRETED
======================

The goal of this patch series is to enable to control script execution with interpreters help. A new AT_INTERPRETED flag, usable through faccessat2(2), is added to enable userspace script interpreters to delegate to the kernel (and thus the system security policy) the permission to interpret/execute scripts or other files containing what can be seen as commands.

A simple system-wide security policy can be enforced by the system administrator through a sysctl configuration consistent with the mount points or the file access rights. The documentation patch explains the prerequisites.

Furthermore, the security policy can also be delegated to an LSM, either a MAC system or an integrity system. For instance, the new kernel MAY_INTERPRETED_EXEC flag is required to close a major IMA measurement/appraisal interpreter integrity gap by bringing the ability to check the use of scripts [1]. Other uses are expected, such as for magic-links [2], SGX integration [3], bpffs [4] or IPE [5].

Possible extended usage
=======================

For now, only the X_OK mode is compatible with the AT_INTERPRETED flag. This enables to restrict the addition of new control flows in a process. Using R_OK or W_OK with AT_INTERPRETED returns -EINVAL.

Possible future use-cases for R_OK with AT_INTERPRETED may be to check configuration files that may impact the behavior of applications (i.e. influence critical part of the current control flow). Those should then be trusted as well. The W_OK with AT_INTERPRETED could be used to check that a file descriptor is allowed to receive sensitive data such as debug logs.

Prerequisite of its use
=======================

Userspace needs to adapt to take advantage of this new feature. For example, the PEP 578 [6] (Runtime Audit Hooks) enables Python 3.8 to be extended with policy enforcement points related to code interpretation, which can be used to align with the PowerShell audit features. Additional Python security improvements (e.g. a limited interpreter without -c, stdin piping of code) are on their way [7].

Examples
========

The initial idea comes from CLIP OS 4 and the original implementation has been used for more than 12 years:
https://github.com/clipos-archive/clipos4_doc
Chrome OS has a similar approach:
https://chromium.googlesource.com/chromiumos/docs/+/master/security/noexec_shell_scripts.md

Userland patches can be found here:
https://github.com/clipos-archive/clipos4_portage-overlay/search?q=O_MAYEXEC
Actually, there is more than the O_MAYEXEC changes (which matches this search) e.g., to prevent Python interactive execution. There are patches for Bash, Wine, Java (Icedtea), Busybox's ash, Perl and Python. There are also some related patches which do not directly rely on O_MAYEXEC but which restrict the use of browser plugins and extensions, which may be seen as scripts too:
https://github.com/clipos-archive/clipos4_portage-overlay/tree/master/www-client

An introduction to O_MAYEXEC was given at the Linux Security Summit Europe 2018 - Linux Kernel Security Contributions by ANSSI:
https://www.youtube.com/watch?v=chNjCRtPKQY&t=17m15s
The "write xor execute" principle was explained at Kernel Recipes 2018 - CLIP OS: a defense-in-depth OS:
https://www.youtube.com/watch?v=PjRE0uBtkHU&t=11m14s
See also an overview article: https://lwn.net/Articles/820000/

This patch series can be applied on top of v5.9-rc4 . This can be tested with CONFIG_SYSCTL. I would really appreciate constructive comments on this patch series.

Previous version:
https://lore.kernel.org/lkml/[email protected]/

[1] https://lore.kernel.org/lkml/[email protected]/
[2] https://lore.kernel.org/lkml/[email protected]/
[3] https://lore.kernel.org/lkml/CALCETrVovr8XNZSroey7pHF46O=kj_c5D9K8h=z2T_cNrpvMig@mail.gmail.com/
[4] https://lore.kernel.org/lkml/CALCETrVeZ0eufFXwfhtaG_j+AdvbzEWE0M3wjXMWVEO7pj+xkw@mail.gmail.com/
[5] https://lore.kernel.org/lkml/[email protected]/
[6] https://www.python.org/dev/peps/pep-0578/
[7] https://lore.kernel.org/lkml/[email protected]/
[8] https://lore.kernel.org/lkml/[email protected]/

Regards,

Mickaël Salaün (3):
fs: Introduce AT_INTERPRETED flag for faccessat2(2) fs,doc: Enable to configure exec checks for AT_INTERPRETED selftest/interpreter: Add tests for AT_INTERPRETED enforcing

 Documentation/admin-guide/sysctl/fs.rst       |  54 +++
 fs/open.c                                     |  67 ++-
 include/linux/fs.h                            |   3 +
 include/uapi/linux/fcntl.h                    |  12 +-
 kernel/sysctl.c                               |  12 +-
 .../testing/selftests/interpreter/.gitignore  |   2 +
 tools/testing/selftests/interpreter/Makefile  |  18 +
 tools/testing/selftests/interpreter/config    |   1 +
 .../interpreter/interpreted_access_test.c     | 384 ++++++++++++++++++
 9 files changed, 548 insertions(+), 5 deletions(-)
 create mode 100644 tools/testing/selftests/interpreter/.gitignore
 create mode 100644 tools/testing/selftests/interpreter/Makefile
 create mode 100644 tools/testing/selftests/interpreter/config
 create mode 100644 tools/testing/selftests/interpreter/interpreted_access_test.c
Signature · 1 line
2.28.0
#1 lore raw

RFC PATCH v8 1/3 fs: Introduce AT_INTERPRETED flag for faccessat2(2)

From: Mickaël Salaün <[email protected]>

The AT_INTERPRETED flag combined with the X_OK mode enable trusted user space tasks to check that files are allowed to be executed by user space. The security policy is consistently managed by the kernel through a sysctl or implemented by an LSM thanks to the inode_permission hook and a new kernel flag: MAY_INTERPRETED_EXEC.

The underlying idea is to be able to restrict scripts interpretation according to a policy defined by the system administrator. For this to be possible, script interpreters must use faccessat2(2) with the AT_INTERPRETED flag and the X_OK mode. To be fully effective, these interpreters also need to handle the other ways to execute code: command line parameters (e.g., option -e for Perl), module loading (e.g., option -m for Python), stdin, file sourcing, environment variables, configuration files, etc. According to the threat model, it may be acceptable to allow some script interpreters (e.g. Bash) to interpret commands from stdin, may it be a TTY or a pipe, because it may not be enough to (directly) perform syscalls. Further documentation can be found in a following patch.

Even without enforced security policy, userland interpreters can set it to enforce the system policy at their level, knowing that it will not break anything on running systems which do not care about this feature. However, on systems which want this feature enforced, there will be knowledgeable people (i.e. sysadmins who enforced AT_INTERPRETED with X_OK deliberately) to manage it. A simple security policy implementation, configured through a dedicated sysctl, is available in a following patch.

AT_INTERPRETED with X_OK should not be confused with the O_EXEC flag (for open) which is intended for execute-only, which obviously doesn't work for scripts. However, a similar behavior could be implemented in userland with O_PATH:
https://lore.kernel.org/lkml/[email protected]/

This is a new implementation of a patch initially written by Vincent Strubel for CLIP OS 4:
https://github.com/clipos-archive/src_platform_clip-patches/blob/f5cb330d6b684752e403b4e41b39f7004d88e561/1901_open_mayexec.patch
This patch has been used for more than 12 years with customized script interpreters. Some examples (with the original O_MAYEXEC) can be found here:
https://github.com/clipos-archive/clipos4_portage-overlay/search?q=O_MAYEXEC

---

Changes since v7:
* Replaces openat2/O_MAYEXEC with faccessat2/X_OK/AT_INTERPRETED . Switching to an FD-based syscall was suggested by Al Viro and Jann Horn.

Changes since v6:
* Do not set __FMODE_EXEC for now because of inconsistent behavior:
https://lore.kernel.org/lkml/202007160822.CCDB5478@keescook/
* Returns EISDIR when opening a directory with O_MAYEXEC.
* Removed Deven Bowers and Kees Cook Reviewed-by tags because of the current update.

Changes since v5:
* Update commit message.

Changes since v3:
* Switch back to O_MAYEXEC, but only handle it with openat2(2) which checks unknown flags (suggested by Aleksa Sarai). Cf.
https://lore.kernel.org/lkml/[email protected]/

Changes since v2:
* Replace O_MAYEXEC with RESOLVE_MAYEXEC from openat2(2). This change enables to not break existing application using bogus O_* flags that may be ignored by current kernels by using a new dedicated flag, only usable through openat2(2) (suggested by Jeff Layton). Using this flag will results in an error if the running kernel does not support it. User space needs to manage this case, as with other RESOLVE_* flags. The best effort approach to security (for most common distros) will simply consists of ignoring such an error and retry without RESOLVE_MAYEXEC. However, a fully controlled system may which to error out if such an inconsistency is detected.

Changes since v1:
* Set __FMODE_EXEC when using O_MAYEXEC to make this information available through the new fanotify/FAN_OPEN_EXEC event (suggested by Jan Kara and Matthew Bobrowski):
https://lore.kernel.org/lkml/[email protected]/

---
 fs/open.c                  | 31 +++++++++++++++++++++++++++++--
 include/linux/fs.h         |  2 ++
 include/uapi/linux/fcntl.h | 12 +++++++++++-
 3 files changed, 42 insertions(+), 3 deletions(-)
fs/open.c +29 -2
index 9af548fb841b..879bdfbdc6fa 100644
@@ -405,9 +405,13 @@ static long do_faccessat(int dfd, const char __user *filename, int mode, int fla
 	if (mode & ~S_IRWXO)	/* where's F_OK, X_OK, W_OK, R_OK? */
 		return -EINVAL;
 
-	if (flags & ~(AT_EACCESS | AT_SYMLINK_NOFOLLOW | AT_EMPTY_PATH))
+	if (flags & ~(AT_EACCESS | AT_SYMLINK_NOFOLLOW | AT_EMPTY_PATH |
+				AT_INTERPRETED))
 		return -EINVAL;
 
+	/* Only allows X_OK with AT_INTERPRETED for now. */
+	if ((flags & AT_INTERPRETED) && !(mode & S_IXOTH))
+		return -EINVAL;
 	if (flags & AT_SYMLINK_NOFOLLOW)
 		lookup_flags &= ~LOOKUP_FOLLOW;
 	if (flags & AT_EMPTY_PATH)
@@ -426,7 +430,30 @@ static long do_faccessat(int dfd, const char __user *filename, int mode, int fla
 
 	inode = d_backing_inode(path.dentry);
 
-	if ((mode & MAY_EXEC) && S_ISREG(inode->i_mode)) {
+	if ((flags & AT_INTERPRETED)) {
+		/*
+		 * For compatibility reasons, without a defined security policy
+		 * (via sysctl or LSM), using AT_INTERPRETED must map the
+		 * execute permission to the read permission.  Indeed, from
+		 * user space point of view, being able to execute data (e.g.
+		 * scripts) implies to be able to read this data.
+		 *
+		 * The MAY_INTERPRETED_EXEC bit is set to enable LSMs to add
+		 * custom checks, while being compatible with current policies.
+		 */
+		if ((mode & MAY_EXEC)) {
+			mode |= MAY_INTERPRETED_EXEC;
+			/*
+			 * For compatibility reasons, if the system-wide policy
+			 * doesn't enforce file permission checks, then
+			 * replaces the execute permission request with a read
+			 * permission request.
+			 */
+			mode &= ~MAY_EXEC;
+			/* To be executed *by* user space, files must be readable. */
+			mode |= MAY_READ;
+		}
+	} else if ((mode & MAY_EXEC) && S_ISREG(inode->i_mode)) {
 		/*
 		 * MAY_EXEC on regular files is denied if the fs is mounted
 		 * with the "noexec" flag.
include/linux/fs.h +2 -0
index 7519ae003a08..03f1b2da6a87 100644
@@ -101,6 +101,8 @@ typedef int (dio_iodone_t)(struct kiocb *iocb, loff_t offset,
 #define MAY_CHDIR		0x00000040
 /* called from RCU mode, don't block */
 #define MAY_NOT_BLOCK		0x00000080
+/* interpreted accesses checked with faccessat2 and AT_INTERPRETED */
+#define MAY_INTERPRETED_EXEC	0x00000100
 
 /*
  * flags in file.f_mode.  Note that FMODE_READ and FMODE_WRITE must correspond
include/uapi/linux/fcntl.h +11 -1
index 2f86b2ad6d7e..dca082b02634 100644
@@ -90,7 +90,8 @@
  * unlinkat.  The two functions do completely different things and therefore,
  * the flags can be allowed to overlap.  For example, passing AT_REMOVEDIR to
  * faccessat would be undefined behavior and thus treating it equivalent to
- * AT_EACCESS is valid undefined behavior.
+ * AT_EACCESS is valid undefined behavior.  The same goes for AT_SYMLINK_FOLLOW
+ * and AT_INTERPRETED.
  */
 #define AT_FDCWD		-100    /* Special value used to indicate
                                            openat should use the current
@@ -100,6 +101,15 @@
                                            effective IDs, not real IDs.  */
 #define AT_REMOVEDIR		0x200   /* Remove directory instead of
                                            unlinking file.  */
+#define AT_INTERPRETED		0x400	/* Check if the current process should
+					   grant access (e.g. execution) for a
+					   specific file, i.e. enables RWX to
+					   be enforced *by* user space.  The
+					   main usage is for script
+					   interpreters to enforce a policy
+					   consistent with the kernel's one
+					   (through sysctl configuration or LSM
+					   policy).  */
 #define AT_SYMLINK_FOLLOW	0x400   /* Follow symbolic links.  */
 #define AT_NO_AUTOMOUNT		0x800	/* Suppress terminal automount traversal */
 #define AT_EMPTY_PATH		0x1000	/* Allow empty relative pathname */
Signature · 1 line
2.28.0
maintainer
#2 lore raw

Re: [RFC PATCH v8 1/3] fs: Introduce AT_INTERPRETED flag for faccessat2(2)

Hi Mickael,

Quoted 26 lines · Mickaël Salaün
fs/open.c +7 -2
index 9af548fb841b..879bdfbdc6fa 100644
@@ -405,9 +405,13 @@ static long do_faccessat(int dfd, const char __user *filename, int mode, int fla
 	if (mode & ~S_IRWXO)	/* where's F_OK, X_OK, W_OK, R_OK? */
 		return -EINVAL;
 
-	if (flags & ~(AT_EACCESS | AT_SYMLINK_NOFOLLOW | AT_EMPTY_PATH))
+	if (flags & ~(AT_EACCESS | AT_SYMLINK_NOFOLLOW | AT_EMPTY_PATH |
+				AT_INTERPRETED))
 		return -EINVAL;
 
+	/* Only allows X_OK with AT_INTERPRETED for now. */
+	if ((flags & AT_INTERPRETED) && !(mode & S_IXOTH))
+		return -EINVAL;
 	if (flags & AT_SYMLINK_NOFOLLOW)
 		lookup_flags &= ~LOOKUP_FOLLOW;
 	if (flags & AT_EMPTY_PATH)
@@ -426,7 +430,30 @@ static long do_faccessat(int dfd, const char __user *filename, int mode, int fla
 
 	inode = d_backing_inode(path.dentry);
 
-	if ((mode & MAY_EXEC) && S_ISREG(inode->i_mode)) {
+	if ((flags & AT_INTERPRETED)) {
+		/*

fs/open.c static long do_faccessat(int dfd, const char __user *filename, int mode, int fla · line 444

Quoted 10 lines
fs/open.c +10 -0
+		 * For compatibility reasons, without a defined security policy
+		 * (via sysctl or LSM), using AT_INTERPRETED must map the
+		 * execute permission to the read permission.  Indeed, from
+		 * user space point of view, being able to execute data (e.g.
+		 * scripts) implies to be able to read this data.
+		 *
+		 * The MAY_INTERPRETED_EXEC bit is set to enable LSMs to add
+		 * custom checks, while being compatible with current policies.
+		 */
+		if ((mode & MAY_EXEC)) {

Why is the ISREG() test being dropped? Without dropping it, there
would be no reason for making the existing test an "else" clause.

fs/open.c static long do_faccessat(int dfd, const char __user *filename, int mode, int fla · line 454

Quoted 10 lines
fs/open.c +10 -0
+			mode |= MAY_INTERPRETED_EXEC;
+			/*
+			 * For compatibility reasons, if the system-wide policy
+			 * doesn't enforce file permission checks, then
+			 * replaces the execute permission request with a read
+			 * permission request.
+			 */
+			mode &= ~MAY_EXEC;
+			/* To be executed *by* user space, files must be readable. */
+			mode |= MAY_READ;

After this change, I'm wondering if it makes sense to add a call to security_file_permission(). IMA doesn't currently define it, but could.

Mimi

Quoted 5 lines
fs/open.c +2 -0
+		}
+	} else if ((mode & MAY_EXEC) && S_ISREG(inode->i_mode)) {
 		/*
 		 * MAY_EXEC on regular files is denied if the fs is mounted
 		 * with the "noexec" flag.
#3 lore raw

Re: [RFC PATCH v8 1/3] fs: Introduce AT_INTERPRETED flag for faccessat2(2)

Quoted 26 lines · Mimi Zohar

Hi Mickael,

Quoted 23 lines · Mickaël Salaün
fs/open.c +5 -1
index 9af548fb841b..879bdfbdc6fa 100644
@@ -405,9 +405,13 @@ static long do_faccessat(int dfd, const char __user *filename, int mode, int fla
 	if (mode & ~S_IRWXO)	/* where's F_OK, X_OK, W_OK, R_OK? */
 		return -EINVAL;
 
-	if (flags & ~(AT_EACCESS | AT_SYMLINK_NOFOLLOW | AT_EMPTY_PATH))
+	if (flags & ~(AT_EACCESS | AT_SYMLINK_NOFOLLOW | AT_EMPTY_PATH |
+				AT_INTERPRETED))
 		return -EINVAL;
 
+	/* Only allows X_OK with AT_INTERPRETED for now. */
+	if ((flags & AT_INTERPRETED) && !(mode & S_IXOTH))
+		return -EINVAL;
 	if (flags & AT_SYMLINK_NOFOLLOW)
 		lookup_flags &= ~LOOKUP_FOLLOW;
 	if (flags & AT_EMPTY_PATH)
@@ -426,7 +430,30 @@ static long do_faccessat(int dfd, const char __user *filename, int mode, int fla
 
 	inode = d_backing_inode(path.dentry);
 
Quoted 16 lines

fs/open.c static long do_faccessat(int dfd, const char __user *filename, int mode, int fla · line 444

Quoted 13 lines
fs/open.c +12 -1
-	if ((mode & MAY_EXEC) && S_ISREG(inode->i_mode)) {
+	if ((flags & AT_INTERPRETED)) {
+		/*
+		 * For compatibility reasons, without a defined security policy
+		 * (via sysctl or LSM), using AT_INTERPRETED must map the
+		 * execute permission to the read permission.  Indeed, from
+		 * user space point of view, being able to execute data (e.g.
+		 * scripts) implies to be able to read this data.
+		 *
+		 * The MAY_INTERPRETED_EXEC bit is set to enable LSMs to add
+		 * custom checks, while being compatible with current policies.
+		 */
+		if ((mode & MAY_EXEC)) {

Why is the ISREG() test being dropped? Without dropping it, there
would be no reason for making the existing test an "else" clause.

The ISREG() is not dropped, it is just moved below with the rest of the original code. The corresponding code (with the path_noexec call) for AT_INTERPRETED is added with the next commit, and it relies on the sysctl configuration for compatibility reasons.

Quoted 15 lines

fs/open.c static long do_faccessat(int dfd, const char __user *filename, int mode, int fla · line 454

Quoted 11 lines
fs/open.c +10 -0
+			mode |= MAY_INTERPRETED_EXEC;
+			/*
+			 * For compatibility reasons, if the system-wide policy
+			 * doesn't enforce file permission checks, then
+			 * replaces the execute permission request with a read
+			 * permission request.
+			 */
+			mode &= ~MAY_EXEC;
+			/* To be executed *by* user space, files must be readable. */
+			mode |= MAY_READ;

After this change, I'm wondering if it makes sense to add a call to security_file_permission(). IMA doesn't currently define it, but could.

Yes, that's the idea. We could replace the following inode_permission() with file_permission(). I'm not sure how this will impact other LSMs though.

Quoted 9 lines

Mimi

Quoted 5 lines
fs/open.c +2 -0
+		}
+	} else if ((mode & MAY_EXEC) && S_ISREG(inode->i_mode)) {
 		/*
 		 * MAY_EXEC on regular files is denied if the fs is mounted
 		 * with the "noexec" flag.
#4 lore raw

Re: [RFC PATCH v8 1/3] fs: Introduce AT_INTERPRETED flag for faccessat2(2)

Quoted 17 lines · Mickaël Salaün
Quoted 14 lines · Mimi Zohar

Hi Mickael,

Quoted 10 lines · Mickaël Salaün
fs/open.c +10 -0
+                    mode |= MAY_INTERPRETED_EXEC;
+                    /*
+                     * For compatibility reasons, if the system-wide policy
+                     * doesn't enforce file permission checks, then
+                     * replaces the execute permission request with a read
+                     * permission request.
+                     */
+                    mode &= ~MAY_EXEC;
+                    /* To be executed *by* user space, files must be readable. */
+                    mode |= MAY_READ;
Quoted 6 lines
Quoted 3 lines

After this change, I'm wondering if it makes sense to add a call to security_file_permission(). IMA doesn't currently define it, but could.

Yes, that's the idea. We could replace the following inode_permission() with file_permission(). I'm not sure how this will impact other LSMs though.

They are not equivalent at least as far as SELinux is concerned. security_file_permission() was only to be used to revalidate read/write permissions previously checked at file open to support policy changes and file or process label changes. We'd have to modify the SELinux hook if we wanted to have it check execute access even if nothing has changed since open time.

#5 lore raw

Re: [RFC PATCH v8 1/3] fs: Introduce AT_INTERPRETED flag for faccessat2(2)

Quoted 26 lines · Stephen Smalley
Quoted 17 lines · Mickaël Salaün
Quoted 14 lines · Mimi Zohar

Hi Mickael,

Quoted 10 lines · Mickaël Salaün
fs/open.c +10 -0
+                    mode |= MAY_INTERPRETED_EXEC;
+                    /*
+                     * For compatibility reasons, if the system-wide policy
+                     * doesn't enforce file permission checks, then
+                     * replaces the execute permission request with a read
+                     * permission request.
+                     */
+                    mode &= ~MAY_EXEC;
+                    /* To be executed *by* user space, files must be readable. */
+                    mode |= MAY_READ;
Quoted 6 lines
Quoted 3 lines

After this change, I'm wondering if it makes sense to add a call to security_file_permission(). IMA doesn't currently define it, but could.

Yes, that's the idea. We could replace the following inode_permission() with file_permission(). I'm not sure how this will impact other LSMs though.

Quoted 6 lines

They are not equivalent at least as far as SELinux is concerned. security_file_permission() was only to be used to revalidate read/write permissions previously checked at file open to support policy changes and file or process label changes. We'd have to modify the SELinux hook if we wanted to have it check execute access even if nothing has changed since open time.

Also Smack doesn't appear to implement file_permission at all, so it would skip Smack checking.

maintainer
#6 lore raw

Re: [RFC PATCH v8 1/3] fs: Introduce AT_INTERPRETED flag for faccessat2(2)

Quoted 21 lines · Stephen Smalley
Quoted 19 lines · Stephen Smalley
Quoted 17 lines · Mickaël Salaün
Quoted 14 lines · Mimi Zohar

Hi Mickael,

Quoted 10 lines · Mickaël Salaün
fs/open.c +10 -0
+                    mode |= MAY_INTERPRETED_EXEC;
+                    /*
+                     * For compatibility reasons, if the system-wide policy
+                     * doesn't enforce file permission checks, then
+                     * replaces the execute permission request with a read
+                     * permission request.
+                     */
+                    mode &= ~MAY_EXEC;
+                    /* To be executed *by* user space, files must be readable. */
+                    mode |= MAY_READ;
Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
Quoted 3 lines

After this change, I'm wondering if it makes sense to add a call to security_file_permission(). IMA doesn't currently define it, but could.

Yes, that's the idea. We could replace the following inode_permission() with file_permission(). I'm not sure how this will impact other LSMs though.

I wasn't suggesting replacing the existing security_inode_permission hook later, but adding a new security_file_permission hook here.

Quoted 10 lines
Quoted 7 lines

They are not equivalent at least as far as SELinux is concerned. security_file_permission() was only to be used to revalidate read/write permissions previously checked at file open to support policy changes and file or process label changes. We'd have to modify the SELinux hook if we wanted to have it check execute access even if nothing has changed since open time.

Also Smack doesn't appear to implement file_permission at all, so it would skip Smack checking.

My question is whether adding a new security_file_permission call here would break either SELinux or Apparmor?

Mimi

#7 lore raw

Re: [RFC PATCH v8 1/3] fs: Introduce AT_INTERPRETED flag for faccessat2(2)

Quoted 41 lines · Mimi Zohar
Quoted 21 lines · Stephen Smalley
Quoted 19 lines · Stephen Smalley
Quoted 17 lines · Mickaël Salaün
Quoted 14 lines · Mimi Zohar

Hi Mickael,

Quoted 10 lines · Mickaël Salaün
fs/open.c +10 -0
+                    mode |= MAY_INTERPRETED_EXEC;
+                    /*
+                     * For compatibility reasons, if the system-wide policy
+                     * doesn't enforce file permission checks, then
+                     * replaces the execute permission request with a read
+                     * permission request.
+                     */
+                    mode &= ~MAY_EXEC;
+                    /* To be executed *by* user space, files must be readable. */
+                    mode |= MAY_READ;
Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
Quoted 3 lines

After this change, I'm wondering if it makes sense to add a call to security_file_permission(). IMA doesn't currently define it, but could.

Yes, that's the idea. We could replace the following inode_permission() with file_permission(). I'm not sure how this will impact other LSMs though.

I wasn't suggesting replacing the existing security_inode_permission hook later, but adding a new security_file_permission hook here.

Quoted 8 lines
Quoted 7 lines

They are not equivalent at least as far as SELinux is concerned. security_file_permission() was only to be used to revalidate read/write permissions previously checked at file open to support policy changes and file or process label changes. We'd have to modify the SELinux hook if we wanted to have it check execute access even if nothing has changed since open time.

Quoted 5 lines
Quoted 2 lines

Also Smack doesn't appear to implement file_permission at all, so it would skip Smack checking.

My question is whether adding a new security_file_permission call here would break either SELinux or Apparmor?

selinux_inode_permission() has special handling for MAY_ACCESS so we'd need to duplicate that into selinux_file_permission() -> selinux_revalidate_file_permission(). Also likely need to adjust selinux_file_permission() to explicitly check whether the mask includes any permissions not checked at open time. So some changes would be needed here. By default, it would be a no-op unless there was a policy reload or the file was relabeled between the open(2) and the faccessat(2) call.

#8 lore raw

Re: [RFC PATCH v8 1/3] fs: Introduce AT_INTERPRETED flag for faccessat2(2)

Quoted 48 lines · Stephen Smalley
Quoted 41 lines · Mimi Zohar
Quoted 21 lines · Stephen Smalley
Quoted 19 lines · Stephen Smalley
Quoted 17 lines · Mickaël Salaün
Quoted 14 lines · Mimi Zohar

Hi Mickael,

Quoted 10 lines · Mickaël Salaün
(quoted diff) +10 -0
+                    mode |= MAY_INTERPRETED_EXEC;
+                    /*
+                     * For compatibility reasons, if the system-wide policy
+                     * doesn't enforce file permission checks, then
+                     * replaces the execute permission request with a read
+                     * permission request.
+                     */
+                    mode &= ~MAY_EXEC;
+                    /* To be executed *by* user space, files must be readable. */
+                    mode |= MAY_READ;
Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
Quoted 3 lines

After this change, I'm wondering if it makes sense to add a call to security_file_permission(). IMA doesn't currently define it, but could.

Yes, that's the idea. We could replace the following inode_permission() with file_permission(). I'm not sure how this will impact other LSMs though.

I wasn't suggesting replacing the existing security_inode_permission hook later, but adding a new security_file_permission hook here.

Quoted 8 lines
Quoted 7 lines

They are not equivalent at least as far as SELinux is concerned. security_file_permission() was only to be used to revalidate read/write permissions previously checked at file open to support policy changes and file or process label changes. We'd have to modify the SELinux hook if we wanted to have it check execute access even if nothing has changed since open time.

Quoted 5 lines
Quoted 2 lines

Also Smack doesn't appear to implement file_permission at all, so it would skip Smack checking.

My question is whether adding a new security_file_permission call here would break either SELinux or Apparmor?

Quoted 9 lines

selinux_inode_permission() has special handling for MAY_ACCESS so we'd need to duplicate that into selinux_file_permission() -> selinux_revalidate_file_permission(). Also likely need to adjust selinux_file_permission() to explicitly check whether the mask includes any permissions not checked at open time. So some changes would be needed here. By default, it would be a no-op unless there was a policy reload or the file was relabeled between the open(2) and the faccessat(2) call.

We could create a new hook path_permission(struct path *path, int mask) as a superset of inode_permission(). To be more convenient, his new hook could then just call inode_permission() for every LSMs not implementing path_permission().

maintainer
#9 lore raw

Re: [RFC PATCH v8 1/3] fs: Introduce AT_INTERPRETED flag for faccessat2(2)

[Cc'ing Casey]

Quoted 59 lines · Mickaël Salaün
Quoted 48 lines · Stephen Smalley
Quoted 41 lines · Mimi Zohar
Quoted 21 lines · Stephen Smalley
Quoted 19 lines · Stephen Smalley
Quoted 17 lines · Mickaël Salaün
Quoted 14 lines · Mimi Zohar

Hi Mickael,

Quoted 10 lines · Mickaël Salaün
(quoted diff) +10 -0
+                    mode |= MAY_INTERPRETED_EXEC;
+                    /*
+                     * For compatibility reasons, if the system-wide policy
+                     * doesn't enforce file permission checks, then
+                     * replaces the execute permission request with a read
+                     * permission request.
+                     */
+                    mode &= ~MAY_EXEC;
+                    /* To be executed *by* user space, files must be readable. */
+                    mode |= MAY_READ;
Quoted 6 lines
Quoted 6 lines
Quoted 6 lines
Quoted 3 lines

After this change, I'm wondering if it makes sense to add a call to security_file_permission(). IMA doesn't currently define it, but could.

Yes, that's the idea. We could replace the following inode_permission() with file_permission(). I'm not sure how this will impact other LSMs though.

I wasn't suggesting replacing the existing security_inode_permission hook later, but adding a new security_file_permission hook here.

Quoted 8 lines
Quoted 7 lines

They are not equivalent at least as far as SELinux is concerned. security_file_permission() was only to be used to revalidate read/write permissions previously checked at file open to support policy changes and file or process label changes. We'd have to modify the SELinux hook if we wanted to have it check execute access even if nothing has changed since open time.

Quoted 5 lines
Quoted 2 lines

Also Smack doesn't appear to implement file_permission at all, so it would skip Smack checking.

My question is whether adding a new security_file_permission call here would break either SELinux or Apparmor?

Quoted 9 lines

selinux_inode_permission() has special handling for MAY_ACCESS so we'd need to duplicate that into selinux_file_permission() -> selinux_revalidate_file_permission(). Also likely need to adjust selinux_file_permission() to explicitly check whether the mask includes any permissions not checked at open time. So some changes would be needed here. By default, it would be a no-op unless there was a policy reload or the file was relabeled between the open(2) and the faccessat(2) call.

Quoted 4 lines

We could create a new hook path_permission(struct path *path, int mask) as a superset of inode_permission(). To be more convenient, his new hook could then just call inode_permission() for every LSMs not implementing path_permission().

The LSM maintainers need to chime in here on this suggestion. In terms of the name, except for one hook, all the security_path_XXXX() hooks are dependent on CONFIG_SECURITY_PATH being configured.

Mimi

maintainer
#10 lore raw

Re: [RFC PATCH v8 1/3] fs: Introduce AT_INTERPRETED flag for faccessat2(2)

In reply to Mickaël Salaün
Quoted 44 lines · Mickaël Salaün
Quoted 26 lines · Mimi Zohar

Hi Mickael,

Quoted 23 lines · Mickaël Salaün
fs/open.c +5 -1
index 9af548fb841b..879bdfbdc6fa 100644
@@ -405,9 +405,13 @@ static long do_faccessat(int dfd, const char __user *filename, int mode, int fla
 	if (mode & ~S_IRWXO)	/* where's F_OK, X_OK, W_OK, R_OK? */
 		return -EINVAL;
 
-	if (flags & ~(AT_EACCESS | AT_SYMLINK_NOFOLLOW | AT_EMPTY_PATH))
+	if (flags & ~(AT_EACCESS | AT_SYMLINK_NOFOLLOW | AT_EMPTY_PATH |
+				AT_INTERPRETED))
 		return -EINVAL;
 
+	/* Only allows X_OK with AT_INTERPRETED for now. */
+	if ((flags & AT_INTERPRETED) && !(mode & S_IXOTH))
+		return -EINVAL;
 	if (flags & AT_SYMLINK_NOFOLLOW)
 		lookup_flags &= ~LOOKUP_FOLLOW;
 	if (flags & AT_EMPTY_PATH)
@@ -426,7 +430,30 @@ static long do_faccessat(int dfd, const char __user *filename, int mode, int fla
 
 	inode = d_backing_inode(path.dentry);
 
Quoted 16 lines

fs/open.c static long do_faccessat(int dfd, const char __user *filename, int mode, int fla · line 444

Quoted 13 lines
fs/open.c +12 -1
-	if ((mode & MAY_EXEC) && S_ISREG(inode->i_mode)) {
+	if ((flags & AT_INTERPRETED)) {
+		/*
+		 * For compatibility reasons, without a defined security policy
+		 * (via sysctl or LSM), using AT_INTERPRETED must map the
+		 * execute permission to the read permission.  Indeed, from
+		 * user space point of view, being able to execute data (e.g.
+		 * scripts) implies to be able to read this data.
+		 *
+		 * The MAY_INTERPRETED_EXEC bit is set to enable LSMs to add
+		 * custom checks, while being compatible with current policies.
+		 */
+		if ((mode & MAY_EXEC)) {

Why is the ISREG() test being dropped? Without dropping it, there
would be no reason for making the existing test an "else" clause.

Quoted 4 lines

The ISREG() is not dropped, it is just moved below with the rest of the original code. The corresponding code (with the path_noexec call) for AT_INTERPRETED is added with the next commit, and it relies on the sysctl configuration for compatibility reasons.

Dropping the S_ISREG() check here without an explanation is wrong and probably unsafe, as it is only re-added in the subsequent patch and only for the "sysctl_interpreted_access" case. Adding this new test after the existing test is probably safer. If the original test fails, it returns the same value as this test -EACCES.

Mimi

Quoted 12 lines
Quoted 12 lines
Quoted 12 lines
fs/open.c +10 -0
+			mode |= MAY_INTERPRETED_EXEC;
+			/*
+			 * For compatibility reasons, if the system-wide policy
+			 * doesn't enforce file permission checks, then
+			 * replaces the execute permission request with a read
+			 * permission request.
+			 */
+			mode &= ~MAY_EXEC;
+			/* To be executed *by* user space, files must be readable. */
+			mode |= MAY_READ;
#11 lore raw

Re: [RFC PATCH v8 1/3] fs: Introduce AT_INTERPRETED flag for faccessat2(2)

Quoted 50 lines · Mimi Zohar
Quoted 44 lines · Mickaël Salaün
Quoted 26 lines · Mimi Zohar

Hi Mickael,

Quoted 23 lines · Mickaël Salaün
fs/open.c +5 -1
index 9af548fb841b..879bdfbdc6fa 100644
@@ -405,9 +405,13 @@ static long do_faccessat(int dfd, const char __user *filename, int mode, int fla
 	if (mode & ~S_IRWXO)	/* where's F_OK, X_OK, W_OK, R_OK? */
 		return -EINVAL;
 
-	if (flags & ~(AT_EACCESS | AT_SYMLINK_NOFOLLOW | AT_EMPTY_PATH))
+	if (flags & ~(AT_EACCESS | AT_SYMLINK_NOFOLLOW | AT_EMPTY_PATH |
+				AT_INTERPRETED))
 		return -EINVAL;
 
+	/* Only allows X_OK with AT_INTERPRETED for now. */
+	if ((flags & AT_INTERPRETED) && !(mode & S_IXOTH))
+		return -EINVAL;
 	if (flags & AT_SYMLINK_NOFOLLOW)
 		lookup_flags &= ~LOOKUP_FOLLOW;
 	if (flags & AT_EMPTY_PATH)
@@ -426,7 +430,30 @@ static long do_faccessat(int dfd, const char __user *filename, int mode, int fla
 
 	inode = d_backing_inode(path.dentry);
 
Quoted 16 lines

fs/open.c static long do_faccessat(int dfd, const char __user *filename, int mode, int fla · line 444

Quoted 13 lines
fs/open.c +12 -1
-	if ((mode & MAY_EXEC) && S_ISREG(inode->i_mode)) {
+	if ((flags & AT_INTERPRETED)) {
+		/*
+		 * For compatibility reasons, without a defined security policy
+		 * (via sysctl or LSM), using AT_INTERPRETED must map the
+		 * execute permission to the read permission.  Indeed, from
+		 * user space point of view, being able to execute data (e.g.
+		 * scripts) implies to be able to read this data.
+		 *
+		 * The MAY_INTERPRETED_EXEC bit is set to enable LSMs to add
+		 * custom checks, while being compatible with current policies.
+		 */
+		if ((mode & MAY_EXEC)) {

Why is the ISREG() test being dropped? Without dropping it, there
would be no reason for making the existing test an "else" clause.

Quoted 4 lines

The ISREG() is not dropped, it is just moved below with the rest of the original code. The corresponding code (with the path_noexec call) for AT_INTERPRETED is added with the next commit, and it relies on the sysctl configuration for compatibility reasons.

Quoted 5 lines

Dropping the S_ISREG() check here without an explanation is wrong and probably unsafe, as it is only re-added in the subsequent patch and only for the "sysctl_interpreted_access" case. Adding this new test after the existing test is probably safer. If the original test fails, it returns the same value as this test -EACCES.

The original S_ISREG() is ANDed with a MAY_EXEC check and with path_noexec(). The goal of this patch is indeed to have a different behavior than the original faccessat2(2) thanks to the AT_INTERPRETED flag. This can't work if we add the sysctl check after the current path_noexec() check. Moreover, in this patch an exec check is translated to a read check. This new behavior is harmless because using AT_INTERPRETED with the current faccessat2(2) would return -EINVAL. The current vanilla behavior is then unchanged.

The whole point of this patch series is to have a policy which do not break current systems and is easy to configure by the sysadmin through sysctl. This patch series also enable LSMs to take advantage of it without the current faccess* limitations. For instance, it is then possible for an LSM to implement more complex policies which may allow execution of data from pipes or sockets, while verifying the source of this data. Enforcing S_ISREG() in this patch would forbid such policies to be implemented. In the case of IMA, you may want to add the same S_ISREG() check.

Quoted 17 lines

Mimi

Quoted 12 lines
Quoted 12 lines
Quoted 12 lines
fs/open.c +10 -0
+			mode |= MAY_INTERPRETED_EXEC;
+			/*
+			 * For compatibility reasons, if the system-wide policy
+			 * doesn't enforce file permission checks, then
+			 * replaces the execute permission request with a read
+			 * permission request.
+			 */
+			mode &= ~MAY_EXEC;
+			/* To be executed *by* user space, files must be readable. */
+			mode |= MAY_READ;
maintainer
#12 lore raw

Re: [RFC PATCH v8 1/3] fs: Introduce AT_INTERPRETED flag for faccessat2(2)

Quoted 57 lines · Mickaël Salaün
Quoted 50 lines · Mimi Zohar
Quoted 44 lines · Mickaël Salaün
Quoted 26 lines · Mimi Zohar

Hi Mickael,

Quoted 23 lines · Mickaël Salaün
fs/open.c +5 -1
index 9af548fb841b..879bdfbdc6fa 100644
@@ -405,9 +405,13 @@ static long do_faccessat(int dfd, const char __user *filename, int mode, int fla
 	if (mode & ~S_IRWXO)	/* where's F_OK, X_OK, W_OK, R_OK? */
 		return -EINVAL;
 
-	if (flags & ~(AT_EACCESS | AT_SYMLINK_NOFOLLOW | AT_EMPTY_PATH))
+	if (flags & ~(AT_EACCESS | AT_SYMLINK_NOFOLLOW | AT_EMPTY_PATH |
+				AT_INTERPRETED))
 		return -EINVAL;
 
+	/* Only allows X_OK with AT_INTERPRETED for now. */
+	if ((flags & AT_INTERPRETED) && !(mode & S_IXOTH))
+		return -EINVAL;
 	if (flags & AT_SYMLINK_NOFOLLOW)
 		lookup_flags &= ~LOOKUP_FOLLOW;
 	if (flags & AT_EMPTY_PATH)
@@ -426,7 +430,30 @@ static long do_faccessat(int dfd, const char __user *filename, int mode, int fla
 
 	inode = d_backing_inode(path.dentry);
 
Quoted 16 lines

fs/open.c static long do_faccessat(int dfd, const char __user *filename, int mode, int fla · line 444

Quoted 13 lines
fs/open.c +12 -1
-	if ((mode & MAY_EXEC) && S_ISREG(inode->i_mode)) {
+	if ((flags & AT_INTERPRETED)) {
+		/*
+		 * For compatibility reasons, without a defined security policy
+		 * (via sysctl or LSM), using AT_INTERPRETED must map the
+		 * execute permission to the read permission.  Indeed, from
+		 * user space point of view, being able to execute data (e.g.
+		 * scripts) implies to be able to read this data.
+		 *
+		 * The MAY_INTERPRETED_EXEC bit is set to enable LSMs to add
+		 * custom checks, while being compatible with current policies.
+		 */
+		if ((mode & MAY_EXEC)) {

Why is the ISREG() test being dropped? Without dropping it, there
would be no reason for making the existing test an "else" clause.

Quoted 4 lines

The ISREG() is not dropped, it is just moved below with the rest of the original code. The corresponding code (with the path_noexec call) for AT_INTERPRETED is added with the next commit, and it relies on the sysctl configuration for compatibility reasons.

Quoted 5 lines

Dropping the S_ISREG() check here without an explanation is wrong and probably unsafe, as it is only re-added in the subsequent patch and only for the "sysctl_interpreted_access" case. Adding this new test after the existing test is probably safer. If the original test fails, it returns the same value as this test -EACCES.

Quoted 8 lines

The original S_ISREG() is ANDed with a MAY_EXEC check and with path_noexec(). The goal of this patch is indeed to have a different behavior than the original faccessat2(2) thanks to the AT_INTERPRETED flag. This can't work if we add the sysctl check after the current path_noexec() check. Moreover, in this patch an exec check is translated to a read check. This new behavior is harmless because using AT_INTERPRETED with the current faccessat2(2) would return -EINVAL. The current vanilla behavior is then unchanged.

Don't get me wrong. I'm very interested in having this support and appreciate all the work you're doing on getting it upstreamed. With the change in this patch, I see the MAY_EXEC being changed to MAY_READ, but I don't see -EINVAL being returned. It sounds like this change is dependent on the faccessat2 version for -EINVAL to be returned.

Quoted 26 lines

The whole point of this patch series is to have a policy which do not break current systems and is easy to configure by the sysadmin through sysctl. This patch series also enable LSMs to take advantage of it without the current faccess* limitations. For instance, it is then possible for an LSM to implement more complex policies which may allow execution of data from pipes or sockets, while verifying the source of this data. Enforcing S_ISREG() in this patch would forbid such policies to be implemented. In the case of IMA, you may want to add the same S_ISREG() check.

Quoted 15 lines
Quoted 13 lines
Quoted 13 lines
Quoted 13 lines
fs/open.c +10 -0
+			mode |= MAY_INTERPRETED_EXEC;
+			/*
+			 * For compatibility reasons, if the system-wide policy
+			 * doesn't enforce file permission checks, then
+			 * replaces the execute permission request with a read
+			 * permission request.
+			 */
+			mode &= ~MAY_EXEC;
+			/* To be executed *by* user space, files must be readable. */
+			mode |= MAY_READ;
#13 lore raw

Re: [RFC PATCH v8 1/3] fs: Introduce AT_INTERPRETED flag for faccessat2(2)

Quoted 67 lines · Mimi Zohar
Quoted 57 lines · Mickaël Salaün
Quoted 50 lines · Mimi Zohar
Quoted 44 lines · Mickaël Salaün
Quoted 26 lines · Mimi Zohar

Hi Mickael,

Quoted 23 lines · Mickaël Salaün
fs/open.c +5 -1
index 9af548fb841b..879bdfbdc6fa 100644
@@ -405,9 +405,13 @@ static long do_faccessat(int dfd, const char __user *filename, int mode, int fla
 	if (mode & ~S_IRWXO)	/* where's F_OK, X_OK, W_OK, R_OK? */
 		return -EINVAL;
 
-	if (flags & ~(AT_EACCESS | AT_SYMLINK_NOFOLLOW | AT_EMPTY_PATH))
+	if (flags & ~(AT_EACCESS | AT_SYMLINK_NOFOLLOW | AT_EMPTY_PATH |
+				AT_INTERPRETED))
 		return -EINVAL;
 
+	/* Only allows X_OK with AT_INTERPRETED for now. */
+	if ((flags & AT_INTERPRETED) && !(mode & S_IXOTH))
+		return -EINVAL;
 	if (flags & AT_SYMLINK_NOFOLLOW)
 		lookup_flags &= ~LOOKUP_FOLLOW;
 	if (flags & AT_EMPTY_PATH)
@@ -426,7 +430,30 @@ static long do_faccessat(int dfd, const char __user *filename, int mode, int fla
 
 	inode = d_backing_inode(path.dentry);
 
Quoted 16 lines

fs/open.c static long do_faccessat(int dfd, const char __user *filename, int mode, int fla · line 444

Quoted 13 lines
fs/open.c +12 -1
-	if ((mode & MAY_EXEC) && S_ISREG(inode->i_mode)) {
+	if ((flags & AT_INTERPRETED)) {
+		/*
+		 * For compatibility reasons, without a defined security policy
+		 * (via sysctl or LSM), using AT_INTERPRETED must map the
+		 * execute permission to the read permission.  Indeed, from
+		 * user space point of view, being able to execute data (e.g.
+		 * scripts) implies to be able to read this data.
+		 *
+		 * The MAY_INTERPRETED_EXEC bit is set to enable LSMs to add
+		 * custom checks, while being compatible with current policies.
+		 */
+		if ((mode & MAY_EXEC)) {

Why is the ISREG() test being dropped? Without dropping it, there
would be no reason for making the existing test an "else" clause.

Quoted 4 lines

The ISREG() is not dropped, it is just moved below with the rest of the original code. The corresponding code (with the path_noexec call) for AT_INTERPRETED is added with the next commit, and it relies on the sysctl configuration for compatibility reasons.

Quoted 5 lines

Dropping the S_ISREG() check here without an explanation is wrong and probably unsafe, as it is only re-added in the subsequent patch and only for the "sysctl_interpreted_access" case. Adding this new test after the existing test is probably safer. If the original test fails, it returns the same value as this test -EACCES.

Quoted 8 lines

The original S_ISREG() is ANDed with a MAY_EXEC check and with path_noexec(). The goal of this patch is indeed to have a different behavior than the original faccessat2(2) thanks to the AT_INTERPRETED flag. This can't work if we add the sysctl check after the current path_noexec() check. Moreover, in this patch an exec check is translated to a read check. This new behavior is harmless because using AT_INTERPRETED with the current faccessat2(2) would return -EINVAL. The current vanilla behavior is then unchanged.

Quoted 5 lines

Don't get me wrong. I'm very interested in having this support and appreciate all the work you're doing on getting it upstreamed. With the change in this patch, I see the MAY_EXEC being changed to MAY_READ, but I don't see -EINVAL being returned. It sounds like this change is dependent on the faccessat2 version for -EINVAL to be returned.

No worries, unfortunately the patch format doesn't ease this review. :) access(2) and faccessat(2) have a flag value of 0. Only faccessat2(2) takes a flag from userspace. The -EINVAL is currently returned (by faccessat2) if there is an unknown flag provided by userspace. With this patch, only a mode equal to X_OK is allowed for the AT_INTERPRETED flag (cf. second hunk in this patch). As described in the cover letter, we could handle the other modes in the future though.

Quoted 29 lines
Quoted 27 lines

The whole point of this patch series is to have a policy which do not break current systems and is easy to configure by the sysadmin through sysctl. This patch series also enable LSMs to take advantage of it without the current faccess* limitations. For instance, it is then possible for an LSM to implement more complex policies which may allow execution of data from pipes or sockets, while verifying the source of this data. Enforcing S_ISREG() in this patch would forbid such policies to be implemented. In the case of IMA, you may want to add the same S_ISREG() check.

Quoted 15 lines
Quoted 13 lines
Quoted 13 lines
Quoted 13 lines
fs/open.c +10 -0
+			mode |= MAY_INTERPRETED_EXEC;
+			/*
+			 * For compatibility reasons, if the system-wide policy
+			 * doesn't enforce file permission checks, then
+			 * replaces the execute permission request with a read
+			 * permission request.
+			 */
+			mode &= ~MAY_EXEC;
+			/* To be executed *by* user space, files must be readable. */
+			mode |= MAY_READ;
#14 lore raw

RFC PATCH v8 2/3 fs,doc: Enable to configure exec checks for AT_INTERPRETED

In reply to Mickaël Salaün

From: Mickaël Salaün <[email protected]>

This enables to configure a policy for executable scripts which can be queried with faccessat2(2) and the AT_INTERPRETED flag. This may allow script interpreters to check execution permission before reading commands from a file, or dynamic linkers to allow shared object loading. This may be seen as a way for a trusted task (e.g. interpreter) to check the trustworthiness of files (e.g. scripts) before extending its control flow graph with new ones originating from these files.

Add a new sysctl fs.interpreted_access to enable system administrators to enforce two complementary security policies according to the installed system: enforce the noexec mount option, and enforce executable file permission. Indeed, because of compatibility with installed systems, only system administrators are able to check that this new enforcement is in line with the system mount points and file permissions.

Being able to restrict execution also enables to protect the kernel by restricting arbitrary syscalls that an attacker could perform with a crafted binary or certain script languages. It also improves multilevel isolation by reducing the ability of an attacker to use side channels with specific code. These restrictions can natively be enforced for ELF binaries (with the noexec mount option) but require this kernel extension to properly handle scripts (e.g. Python, Perl). To get a consistent execution policy, additional memory restrictions should also be enforced (e.g. thanks to SELinux).

Because the AT_INTERPRETED flag combined with X_OK mode is a mean to enforce a system-wide security policy (but not application-centric policies), it does not make sense for user space to check the sysctl value. Indeed, this new flag only enables to extend the system ability to enforce a policy thanks to (some trusted) user space collaboration. Moreover, additional security policies could be managed by LSMs. This is a best-effort approach from the application developer point of view:
https://lore.kernel.org/lkml/[email protected]/

Cc Al Viro <[email protected]>
Cc Andrew Morton <[email protected]>
Cc Jann Horn <[email protected]>
Cc Jonathan Corbet <[email protected]>
Cc Kees Cook <[email protected]>
Cc Miklos Szeredi <[email protected]>

---

Changes since v7:
* Handle special file descriptors.
* Add a compatibility mode for execute/read check.
* Move the sysctl policy from fs/namei.c to fs/open.c for the new faccessat2/AT_INTERPRETED.
* Rename the sysctl from fs.open_mayexec_enforce to fs.interpreted_access .
* Update documentation accordingly.

Changes since v6:
* Allow opening pipes, block devices and character devices with O_MAYEXEC when there is no enforced policy, but forbid any non-regular file opened with O_MAYEXEC otherwise (i.e. for any enforced policy).
* Add a paragraph about the non-regular files policy.
* Move path_noexec() calls out of the fast-path (suggested by Kees Cook).

Changes since v5:
* Remove the static enforcement configuration through Kconfig because it makes the code more simple like this, and because the current sysctl configuration can only be set with CAP_SYS_ADMIN, the same way mount options (i.e. noexec) can be set. If an harden distro wants to enforce a configuration, it should restrict capabilities or sysctl configuration. Furthermore, an LSM can easily leverage O_MAYEXEC to fit its need.
* Move checks from inode_permission() to may_open() and make the error codes more consistent according to file types (in line with a previous commit): opening a directory with O_MAYEXEC returns EISDIR and other non-regular file types may return EACCES.
* In may_open(), when OMAYEXEC_ENFORCE_FILE is set, replace explicit call to generic_permission() with an artificial MAY_EXEC to avoid double calls. This makes sense especially when an LSM policy forbids execution of a file.
* Replace the custom proc_omayexec() with proc_dointvec_minmax_sysadmin(), and then replace the CAP_MAC_ADMIN check with a CAP_SYS_ADMIN one (suggested by Kees Cook and Stephen Smalley).
* Use BIT() (suggested by Kees Cook).
* Rename variables (suggested by Kees Cook).
* Reword the kconfig help.
* Import the documentation patch (suggested by Kees Cook):
https://lore.kernel.org/lkml/[email protected]/
* Update documentation and add LWN.net article.

Changes since v4:
* Add kernel configuration options to enforce O_MAYEXEC at build time, and disable the sysctl in such case (requested by James Morris).
* Reword commit message.

Changes since v3:
* Update comment with O_MAYEXEC.

Changes since v2:
* Cosmetic changes.

Changes since v1:
* Move code from Yama to the FS subsystem (suggested by Kees Cook).
* Make omayexec_inode_permission() static (suggested by Jann Horn).
* Use mode 0600 for the sysctl.
* Only match regular files (not directories nor other types), which follows the same semantic as commit 73601ea5b7b1 ("fs/open.c: allow opening only regular files during execve()").

---
 Documentation/admin-guide/sysctl/fs.rst | 54 +++++++++++++++++++++++++
 fs/open.c                               | 38 ++++++++++++++++-
 include/linux/fs.h                      |  1 +
 kernel/sysctl.c                         | 12 +++++-
 4 files changed, 102 insertions(+), 3 deletions(-)
Documentation/admin-guide/sysctl/fs.rst +54 -0
index f48277a0a850..66d1c1bd67a5 100644
@@ -36,6 +36,7 @@ Currently, these files are in /proc/sys/fs:
 - inode-max
 - inode-nr
 - inode-state
+- interpreted_access
 - nr_open
 - overflowuid
 - overflowgid
@@ -165,6 +166,59 @@ system needs to prune the inode list instead of allocating
 more.
 
 
+interpreted_access
+------------------
+
+The ``AT_INTERPRETED`` flag with an ``X_OK`` mode can be passed to
+:manpage:`faccessat2(2)` by an interpreter to check that regular files are
+expected to be executable.  If the file is not identified as executable, then
+the syscall returns -EACCES.  This may allow a script interpreter to check
+executable permission before reading commands from a file, or a dynamic linker
+to only load executable shared objects.  One interesting use case is to enforce
+a "write xor execute" policy through interpreters.
+
+To avoid race-conditions, it is highly recommended to first open the file and
+then do the check on the new file descriptor thanks to the ``AT_EMPTY_PATH``
+flag.
+
+The ability to restrict code execution must be thought as a system-wide policy,
+which first starts by restricting mount points with the ``noexec`` option.
+This option is also automatically applied to special filesystems such as /proc .
+This prevents files on such mount points to be directly executed by the kernel
+or mapped as executable memory (e.g. libraries).  With script interpreters
+using :manpage:`faccessat2(2)` and ``AT_INTERPRETED``, the executable
+permission can then be checked before reading commands from files.  This makes
+it possible to enforce the ``noexec`` at the interpreter level, and thus
+propagates this security policy to scripts.  To be fully effective, these
+interpreters also need to handle the other ways to execute code: command line
+parameters (e.g., option ``-e`` for Perl), module loading (e.g., option ``-m``
+for Python), stdin, file sourcing, environment variables, configuration files,
+etc.  According to the threat model, it may be acceptable to allow some script
+interpreters (e.g. Bash) to interpret commands from stdin, may it be a TTY or a
+pipe, because it may not be enough to (directly) perform syscalls.
+
+There are two complementary security policies: enforce the ``noexec`` mount
+option, and enforce executable file permission.  These policies are handled by
+the ``fs.interpreted_access`` sysctl (writable only with ``CAP_SYS_ADMIN``)
+as a bitmask:
+
+1 - Mount restriction: checks that the mount options for the underlying VFS
+    mount do not prevent execution.
+
+2 - File permission restriction: checks that the file is marked as
+    executable for the current process (e.g., POSIX permissions, ACLs).
+
+Note that as long as a policy is enforced, checking any non-regular file with
+``AT_INTERPRETED`` returns -EINVAL (e.g. TTYs, pipe), even when such a file is
+marked as executable or is on an executable mount point.
+
+Code samples can be found in
+tools/testing/selftests/interpreter/interpreted_access_test.c and interpreter
+patches (for the original O_MAYEXEC) are available at
+https://github.com/clipos-archive/clipos4_portage-overlay/search?q=O_MAYEXEC .
+See also an overview article: https://lwn.net/Articles/820000/ .
+
+
 overflowgid & overflowuid
 -------------------------
 
fs/open.c +37 -1
index 879bdfbdc6fa..ef01ab35449d 100644
@@ -32,6 +32,7 @@
 #include <linux/ima.h>
 #include <linux/dnotify.h>
 #include <linux/compat.h>
+#include <linux/sysctl.h>
 
 #include "internal.h"
 
@@ -394,6 +395,11 @@ static const struct cred *access_override_creds(void)
 	return old_cred;
 }
 
+#define INTERPRETED_EXEC_MOUNT		BIT(0)
+#define INTERPRETED_EXEC_FILE		BIT(1)
+
+int sysctl_interpreted_access __read_mostly;
+
 static long do_faccessat(int dfd, const char __user *filename, int mode, int flags)
 {
 	struct path path;
@@ -443,13 +449,43 @@ static long do_faccessat(int dfd, const char __user *filename, int mode, int fla
 		 */
 		if ((mode & MAY_EXEC)) {
 			mode |= MAY_INTERPRETED_EXEC;
+			res = -EACCES;
+			/*
+			 * If there is a system-wide execute policy enforced,
+			 * then forbids access to non-regular files and special
+			 * superblocks.
+			 */
+			if ((sysctl_interpreted_access & (INTERPRETED_EXEC_MOUNT |
+							INTERPRETED_EXEC_FILE))) {
+				if (!S_ISREG(inode->i_mode))
+					goto out_path_release;
+				/*
+				 * Denies access to pseudo filesystems that
+				 * will never be mountable (e.g. sockfs,
+				 * pipefs) but can still be reachable through
+				 * /proc/self/fd, or memfd-like file
+				 * descriptors, or nsfs-like files.
+				 *
+				 * According to the tests, SB_NOEXEC seems to
+				 * be only used by proc and nsfs filesystems.
+				 * Is it correct?
+				 */
+				if ((path.dentry->d_sb->s_flags &
+							(SB_NOUSER | SB_KERNMOUNT | SB_NOEXEC)))
+					goto out_path_release;
+			}
+
+			if ((sysctl_interpreted_access & INTERPRETED_EXEC_MOUNT) &&
+					path_noexec(&path))
+				goto out_path_release;
 			/*
 			 * For compatibility reasons, if the system-wide policy
 			 * doesn't enforce file permission checks, then
 			 * replaces the execute permission request with a read
 			 * permission request.
 			 */
-			mode &= ~MAY_EXEC;
+			if (!(sysctl_interpreted_access & INTERPRETED_EXEC_FILE))
+				mode &= ~MAY_EXEC;
 			/* To be executed *by* user space, files must be readable. */
 			mode |= MAY_READ;
 		}
include/linux/fs.h +1 -0
index 03f1b2da6a87..ef39550f2464 100644
@@ -83,6 +83,7 @@ extern int sysctl_protected_symlinks;
 extern int sysctl_protected_hardlinks;
 extern int sysctl_protected_fifos;
 extern int sysctl_protected_regular;
+extern int sysctl_interpreted_access;
 
 typedef __kernel_rwf_t rwf_t;
 
kernel/sysctl.c +10 -2
index 09e70ee2332e..899fa52b4ee8 100644
@@ -113,6 +113,7 @@ static int sixty = 60;
 
 static int __maybe_unused neg_one = -1;
 static int __maybe_unused two = 2;
+static int __maybe_unused three = 3;
 static int __maybe_unused four = 4;
 static unsigned long zero_ul;
 static unsigned long one_ul = 1;
@@ -887,7 +888,6 @@ static int proc_taint(struct ctl_table *table, int write,
 	return err;
 }
 
-#ifdef CONFIG_PRINTK
 static int proc_dointvec_minmax_sysadmin(struct ctl_table *table, int write,
 				void *buffer, size_t *lenp, loff_t *ppos)
 {
@@ -896,7 +896,6 @@ static int proc_dointvec_minmax_sysadmin(struct ctl_table *table, int write,
 
 	return proc_dointvec_minmax(table, write, buffer, lenp, ppos);
 }
-#endif
 
 /**
  * struct do_proc_dointvec_minmax_conv_param - proc_dointvec_minmax() range checking structure
@@ -3293,6 +3292,15 @@ static struct ctl_table fs_table[] = {
 		.extra1		= SYSCTL_ZERO,
 		.extra2		= &two,
 	},
+	{
+		.procname       = "interpreted_access",
+		.data           = &sysctl_interpreted_access,
+		.maxlen         = sizeof(int),
+		.mode           = 0600,
+		.proc_handler	= proc_dointvec_minmax_sysadmin,
+		.extra1		= SYSCTL_ZERO,
+		.extra2		= &three,
+	},
 #if defined(CONFIG_BINFMT_MISC) || defined(CONFIG_BINFMT_MISC_MODULE)
 	{
 		.procname	= "binfmt_misc",
Signature · 1 line
2.28.0
#15 lore raw

RFC PATCH v8 3/3 selftest/interpreter: Add tests for AT_INTERPRETED enforcing

In reply to Mickaël Salaün

From: Mickaël Salaün <[email protected]>

Test that checks performed by faccessat2(2) with AT_INTERPRETED on file path and file descriptors are consistent with noexec mount points and file execute permissions, according to the policy configured with the fs.interpreted_access sysctl.

Cc Al Viro <[email protected]>
Cc Andrew Morton <[email protected]>
Cc Jann Horn <[email protected]>
Cc Kees Cook <[email protected]>
Cc Miklos Szeredi <[email protected]>
Cc Shuah Khan <[email protected]>

---

Changes since v7:
* Update tests with faccessat2/AT_INTERPRETED, including new ones to check that setting R_OK or W_OK returns EINVAL.
* Add tests for memfd, pipefs and nsfs.
* Rename and move back tests to a standalone directory.

Changes since v6:
* Add full combination tests for all file types, including block devices, character devices, fifos, sockets and symlinks.
* Properly save and restore initial sysctl value for all tests.

Changes since v5:
* Refactor with FIXTURE_VARIANT, which make the tests much more easy to read and maintain.
* Save and restore initial sysctl value (suggested by Kees Cook).
* Test with a sysctl value of 0.
* Check errno in sysctl_access_write test.
* Update tests for the CAP_SYS_ADMIN switch.
* Update tests to check -EISDIR (replacing -EACCES).
* Replace FIXTURE_DATA() with FIXTURE() (spotted by Kees Cook).
* Use global const strings.

Changes since v3:
* Replace RESOLVE_MAYEXEC with O_MAYEXEC.
* Add tests to check that O_MAYEXEC is ignored by open(2) and openat(2).

Changes since v2:
* Move tests from exec/ to openat2/ .
* Replace O_MAYEXEC with RESOLVE_MAYEXEC from openat2(2).
* Cleanup tests.

Changes since v1:
* Move tests from yama/ to exec/ .
* Fix _GNU_SOURCE in kselftest_harness.h .
* Add a new test sysctl_access_write to check if CAP_MAC_ADMIN is taken into account.
* Test directory execution which is always forbidden since commit 73601ea5b7b1 ("fs/open.c: allow opening only regular files during execve()"), and also check that even the root user can not bypass file execution checks.
* Make sure delete_workspace() always as enough right to succeed.
* Cosmetic cleanup.

---
 .../testing/selftests/interpreter/.gitignore  |   2 +
 tools/testing/selftests/interpreter/Makefile  |  18 +
 tools/testing/selftests/interpreter/config    |   1 +
 .../interpreter/interpreted_access_test.c     | 384 ++++++++++++++++++
 4 files changed, 405 insertions(+)
 create mode 100644 tools/testing/selftests/interpreter/.gitignore
 create mode 100644 tools/testing/selftests/interpreter/Makefile
 create mode 100644 tools/testing/selftests/interpreter/config
 create mode 100644 tools/testing/selftests/interpreter/interpreted_access_test.c
tools/testing/selftests/interpreter/.gitignore new file +2 -0
new file mode 100644
index 000000000000..82a4846cbc4b
@@ -0,0 +1,2 @@
+# SPDX-License-Identifier: GPL-2.0-only
+/*_test
tools/testing/selftests/interpreter/Makefile new file +18 -0
new file mode 100644
index 000000000000..6b3e8c3e533b
@@ -0,0 +1,18 @@
+# SPDX-License-Identifier: GPL-2.0-or-later
+
+CFLAGS += -Wall -O2
+LDLIBS += -lcap
+
+src_test := $(wildcard *_test.c)
+TEST_GEN_PROGS := $(src_test:.c=)
+
+KSFT_KHDR_INSTALL := 1
+include ../lib.mk
+
+khdr_dir = $(top_srcdir)/usr/include
+
+$(khdr_dir)/asm-generic/unistd.h: khdr
+	@:
+
+$(OUTPUT)/%_test: %_test.c $(khdr_dir)/asm-generic/unistd.h ../kselftest_harness.h
+	$(LINK.c) $< $(LDLIBS) -o $@ -I$(khdr_dir)
tools/testing/selftests/interpreter/config new file +1 -0
new file mode 100644
index 000000000000..dd53c266bf52
@@ -0,0 +1 @@
+CONFIG_SYSCTL=y
tools/testing/selftests/interpreter/interpreted_access_test.c new file +384 -0

384 lines not on this page · raw message

Signature · 1 line
2.28.0
maintainer
#16 lore raw
In reply to Mickaël Salaün
Quoted 8 lines · Mickaël Salaün

Hi,

This height patch series rework the previous O_MAYEXEC series by not adding a new flag to openat2(2) but to faccessat2(2) instead. As suggested, this enables to perform the access check on a file descriptor instead of on a file path (while opening it). This may require two checks (one on open and then with faccessat2) but it is a more generic approach [8].

Again, why is that folded into lookup/open/whatnot, rather than being an operation applied to a file (e.g. O_PATH one)?

#17 lore raw
Quoted 10 lines · Al Viro
Quoted 8 lines · Mickaël Salaün

Hi,

This height patch series rework the previous O_MAYEXEC series by not adding a new flag to openat2(2) but to faccessat2(2) instead. As suggested, this enables to perform the access check on a file descriptor instead of on a file path (while opening it). This may require two checks (one on open and then with faccessat2) but it is a more generic approach [8].

Quoted 3 lines

Again, why is that folded into lookup/open/whatnot, rather than being an operation applied to a file (e.g. O_PATH one)?

I don't understand your question. AT_INTERPRETED can and should be used with AT_EMPTY_PATH. The two checks I wrote about was for IMA.

#18 lore raw
Quoted 12 lines · Mickaël Salaün
Quoted 10 lines · Al Viro
Quoted 8 lines · Mickaël Salaün

Hi,

This height patch series rework the previous O_MAYEXEC series by not adding a new flag to openat2(2) but to faccessat2(2) instead. As suggested, this enables to perform the access check on a file descriptor instead of on a file path (while opening it). This may require two checks (one on open and then with faccessat2) but it is a more generic approach [8].

Quoted 5 lines
Quoted 2 lines

Again, why is that folded into lookup/open/whatnot, rather than being an operation applied to a file (e.g. O_PATH one)?

I don't understand your question. AT_INTERPRETED can and should be used with AT_EMPTY_PATH. The two checks I wrote about was for IMA.

Al is saying you should add a new syscall, not try to fold it into some existing syscall.

I agree with him. Add a new syscall, just like you were told to do it last time.

#19 lore raw
Quoted 16 lines · Matthew Wilcox
Quoted 15 lines · Mickaël Salaün
Quoted 12 lines · Al Viro
Quoted 8 lines · Mickaël Salaün

Hi,

This height patch series rework the previous O_MAYEXEC series by not adding a new flag to openat2(2) but to faccessat2(2) instead. As suggested, this enables to perform the access check on a file descriptor instead of on a file path (while opening it). This may require two checks (one on open and then with faccessat2) but it is a more generic approach [8].

Again, why is that folded into lookup/open/whatnot, rather than being an operation applied to a file (e.g. O_PATH one)?

Quoted 9 lines
Quoted 2 lines

I don't understand your question. AT_INTERPRETED can and should be used with AT_EMPTY_PATH. The two checks I wrote about was for IMA.

Al is saying you should add a new syscall, not try to fold it into some existing syscall.

I agree with him. Add a new syscall, just like you were told to do it last time.

OK, but I didn't receive a response for my proposition to extend faccessat2(2).

#20 lore raw
In reply to Matthew Wilcox
Quoted 16 lines · Matthew Wilcox
Quoted 15 lines · Mickaël Salaün
Quoted 12 lines · Al Viro
Quoted 8 lines · Mickaël Salaün

Hi,

This height patch series rework the previous O_MAYEXEC series by not adding a new flag to openat2(2) but to faccessat2(2) instead. As suggested, this enables to perform the access check on a file descriptor instead of on a file path (while opening it). This may require two checks (one on open and then with faccessat2) but it is a more generic approach [8].

Again, why is that folded into lookup/open/whatnot, rather than being an operation applied to a file (e.g. O_PATH one)?

Quoted 8 lines
Quoted 2 lines

I don't understand your question. AT_INTERPRETED can and should be used with AT_EMPTY_PATH. The two checks I wrote about was for IMA.

Al is saying you should add a new syscall, not try to fold it into some existing syscall.

I agree with him. Add a new syscall, just like you were told to do it last time.

Sure, we'll do it. In the meantime, could we at least get an explanation about why using faccessat2() instead of a new syscall is wrong? I could see the reasons for separating the exec checks from the file opening, but this time I don't understand. Is it because it brings too much complexity to do_faccessat()?

Signature · 2 lines
Thibaut Sautereau
CLIP OS developer
maintainer
#21 lore raw
In reply to Mickaël Salaün
Quoted 12 lines · Mickaël Salaün
Quoted 10 lines · Al Viro
Quoted 8 lines · Mickaël Salaün

Hi,

This height patch series rework the previous O_MAYEXEC series by not adding a new flag to openat2(2) but to faccessat2(2) instead. As suggested, this enables to perform the access check on a file descriptor instead of on a file path (while opening it). This may require two checks (one on open and then with faccessat2) but it is a more generic approach [8].

Quoted 6 lines
Quoted 3 lines

Again, why is that folded into lookup/open/whatnot, rather than being an operation applied to a file (e.g. O_PATH one)?

I don't understand your question. AT_INTERPRETED can and should be used with AT_EMPTY_PATH. The two checks I wrote about was for IMA.

Once more, with feeling: don't hide that behind existing syscalls. If you want to tell LSM have a look at given fs object in a special way, *add* *a* *new* *system* *call* *for* *doing* *just* *that*.

#22 lore raw
Quoted 17 lines · Al Viro
Quoted 16 lines · Mickaël Salaün
Quoted 13 lines · Al Viro
Quoted 8 lines · Mickaël Salaün

Hi,

This height patch series rework the previous O_MAYEXEC series by not adding a new flag to openat2(2) but to faccessat2(2) instead. As suggested, this enables to perform the access check on a file descriptor instead of on a file path (while opening it). This may require two checks (one on open and then with faccessat2) but it is a more generic approach [8].

Again, why is that folded into lookup/open/whatnot, rather than being an operation applied to a file (e.g. O_PATH one)?

Quoted 7 lines
Quoted 2 lines

I don't understand your question. AT_INTERPRETED can and should be used with AT_EMPTY_PATH. The two checks I wrote about was for IMA.

Once more, with feeling: don't hide that behind existing syscalls. If you want to tell LSM have a look at given fs object in a special way, *add* *a* *new* *system* *call* *for* *doing* *just* *that*.

Fine, I'll do it. It will look a lot like this one though.

maintainer
#23 lore raw
In reply to Al Viro
Quoted 17 lines · Al Viro
Quoted 16 lines · Mickaël Salaün
Quoted 13 lines · Al Viro
Quoted 8 lines · Mickaël Salaün

Hi,

This height patch series rework the previous O_MAYEXEC series by not adding a new flag to openat2(2) but to faccessat2(2) instead. As suggested, this enables to perform the access check on a file descriptor instead of on a file path (while opening it). This may require two checks (one on open and then with faccessat2) but it is a more generic approach [8].

Again, why is that folded into lookup/open/whatnot, rather than being an operation applied to a file (e.g. O_PATH one)?

Quoted 6 lines
Quoted 2 lines

I don't understand your question. AT_INTERPRETED can and should be used with AT_EMPTY_PATH. The two checks I wrote about was for IMA.

Once more, with feeling: don't hide that behind existing syscalls. If you want to tell LSM have a look at given fs object in a special way, *add* *a* *new* *system* *call* *for* *doing* *just* *that*.

It's not just for LSM, though, and it has identical semantics from the caller's POV as faccessat().

Signature · 2 lines
James Morris
<[email protected]>