Reading squashfs from spi nor mtd device
Been banging my head most of the day, can't figure it out.
Have squashfs support compiled in, and can load files and so from MMC device.
What I really want is to read (kernel etc) from a QSPI NOR flash (using mtd I guess?)
For mmc it's easy:
Zynq> sqfsls mmc 0:2
bin/
boot/
dev/
etc/
home/
lib/
<SYM> linuxrc
media/
<SYM> mnt
proc/
run/
sbin/
sys/
<SYM> tmp
usr/
var/
www/
3 file(s), 14 dir(s)
For QSPI NOR, I can't find any clue as for what I should pass to sqfsls as "device" parameters. I have MTD set up, and I can load ubifs just fine from this flash, using "ubi part qspi-rootfs" when there's an ubi fileystem in there...
Zynq> mtd list
List of MTD devices:
* nor0
- device: flash@0
- parent: spi@e000d000
- driver: jedec_spi_nor
- path: /axi/spi@e000d000/flash@0
- type: NOR flash
- block size: 0x10000 bytes
- min I/O: 0x1 bytes
- 0x000000000000-0x000002000000 : "nor0"
- 0x000000000000-0x000000100000 : "qspi-boot-bin"
- 0x000000100000-0x000002000000 : "qspi-rootfs"
So what are the "magic" words I need to pass to sqfsload to make it read the flash device?
Signature · 10 lines
Mike Looijmans System Expert TOPIC Embedded Products B.V. Materiaalweg 4, 5681 RJ Best The Netherlands T: +31 (0) 499 33 69 69 E: [email protected] W: www.topic.nl