Skip to contentSkip to conversation

lib/igt_kms: Improve connector probing in igt_display_init()

PATCH New Maarten Lankhorst 3 participants 11 messages Mar 26, 2018 – Mar 28, 2018 Library code

lore
Share & tools
lore

Maarten Lankhorst

author
#0 lore raw

PATCH 1/1 lib/igt_kms: Improve connector probing in igt_display_init()

Only do a full probe when the initial connector status is unknown, and otherwise skip it. This should speed up kms tests ever so slightly.

Also set pipe to PIPE_NONE for igt_output_refresh(), to make the connector info slightly more accurate.

Signed-off-by Maarten Lankhorst <[email protected]>
---
 lib/igt_kms.c | 17 +++++++++++++----
 lib/igt_kms.h |  2 +-
 2 files changed, 14 insertions(+), 5 deletions(-)
lib/igt_kms.c +13 -4
index d8f69d3db9ca..44f6ae977092 100644
@@ -974,7 +974,7 @@ _kmstest_connector_config_find_encoder(int drm_fd, drmModeConnector *connector,
 static bool _kmstest_connector_config(int drm_fd, uint32_t connector_id,
 				      unsigned long crtc_idx_mask,
 				      struct kmstest_connector_config *config,
-				      bool probe)
+				      int probe)
 {
 	drmModeRes *resources;
 	drmModeConnector *connector;

@@ -988,11 +988,19 @@ static bool _kmstest_connector_config(int drm_fd, uint32_t connector_id,
 	}
 
 	/* First, find the connector & mode */
-	if (probe)
+	if (probe > 0)
 		connector = drmModeGetConnector(drm_fd, connector_id);
-	else
+	else {
 		connector = drmModeGetConnectorCurrent(drm_fd, connector_id);
 
+		if (probe < 0 && connector &&
+		    connector->connection == DRM_MODE_UNKNOWNCONNECTION) {
+			drmModeFreeConnector(connector);
+
+			connector = drmModeGetConnector(drm_fd, connector_id);
+		}
+	}
+
 	if (!connector)
 		goto err2;
 

@@ -2028,7 +2036,8 @@ void igt_display_init(igt_display_t *display, int drm_fd)
 		 * We don't assign each output a pipe unless
 		 * a pipe is set with igt_output_set_pipe().
 		 */
-		output->force_reprobe = true;
+		output->force_reprobe = -1;
+		output->pipe = PIPE_NONE;
 		output->id = resources->connectors[i];
 		output->display = display;
lib/igt_kms.h +1 -1
index 6f16dc8cf85e..9e734ab1a5b8 100644
@@ -340,7 +340,7 @@ typedef struct {
 	uint32_t id;					/* KMS id */
 	struct kmstest_connector_config config;
 	char *name;
-	bool force_reprobe;
+	int force_reprobe;
 	enum pipe pending_pipe;
 	bool use_override_mode;
 	drmModeModeInfo override_mode;
Signature · 6 lines
2.16.3

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
CI
#1 lore raw

[igt-dev] ✗ Fi.CI.BAT: failure for lib/igt_kms: Improve connector probing in igt_display_init()

== Series Details ==

== Series Details ==

Series: lib/igt_kms: Improve connector probing in igt_display_init()
URL : https://patchwork.freedesktop.org/series/40660/
State : failure

== Summary ==

IGT patchset build failed on latest successful build a9741da52ad1963f7632ef1e852cbe1c3bcc601e tests/perf_pmu: Improve accuracy by waiting on spinner to start

ninja: Entering directory `build'
[1/517] 'Generating version.h with a custom command.'
[2/514] Static linking library lib/libigt-igt_aux_c.a
[3/514] Compiling c object 'lib/igt-igt_kms_c@sta/igt_kms.c.o'
FAILED: lib/igt-igt_kms_c@sta/igt_kms.c.o
ccache cc '-Ilib/igt-igt_kms_c@sta' '-Ilib' '-I../lib' '-I.' '-I../' '-I../include/drm-uapi' '-I/usr/include/cairo' '-I/usr/include/glib-2.0' '-I/usr/lib/x86_64-linux-gnu/glib-2.0/include' '-I/usr/include/pixman-1' '-I/usr/include/freetype2' '-I/usr/include/libpng12' '-I/opt/igt/include' '-I/opt/igt/include/libdrm' '-I/usr/include' '-I/home/cidrm/kernel_headers/include' '-fdiagnostics-color=always' '-pipe' '-D_FILE_OFFSET_BITS=64' '-Wall' '-Winvalid-pch' '-Wextra' '-std=gnu99' '-O0' '-g' '-D_GNU_SOURCE' '-include' 'config.h' '-Wno-unused-parameter' '-Wno-sign-compare' '-Wno-missing-field-initializers' '-Wno-clobbered' '-Wno-type-limits' '-fPIC' '-pthread' '-DIGT_DATADIR="/opt/igt/share/intel-gpu-tools"' '-DIGT_SRCDIR="/home/cidrm/intel-gpu-tools/tests"' '-DIGT_LOG_DOMAIN="igt_kms"' '-MMD' '-MQ' 'lib/igt-igt_kms_c@sta/igt_kms.c.o' '-MF' 'lib/igt-igt_kms_c@sta/igt_kms.c.o.d' -o 'lib/igt-igt_kms_c@sta/igt_kms.c.o' -c ../lib/igt_kms.c ../lib/igt_kms.c: In function ‘igt_display_init’:
../lib/igt_kms.c:1967:9: error: ‘igt_output_t {aka struct <anonymous>}’ has no member named ‘pipe’

   output->pipe = PIPE_NONE;
         ^~

ninja: build stopped: subcommand failed.

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

author
#2 lore raw

PATCH 1/1 lib/igt_kms: Improve connector probing in igt_display_init()

Only do a full probe when the initial connector status is unknown, and otherwise skip it. This should speed up kms tests ever so slightly.

Also set pipe to PIPE_NONE for igt_output_refresh(), to make the connector info slightly more accurate.

Signed-off-by Maarten Lankhorst <[email protected]>
---
 lib/igt_kms.c | 17 +++++++++++++----
 lib/igt_kms.h |  2 +-
 2 files changed, 14 insertions(+), 5 deletions(-)
lib/igt_kms.c +13 -4
index d8f69d3db9ca..f47c32a79222 100644
@@ -974,7 +974,7 @@ _kmstest_connector_config_find_encoder(int drm_fd, drmModeConnector *connector,
 static bool _kmstest_connector_config(int drm_fd, uint32_t connector_id,
 				      unsigned long crtc_idx_mask,
 				      struct kmstest_connector_config *config,
-				      bool probe)
+				      int probe)
 {
 	drmModeRes *resources;
 	drmModeConnector *connector;

@@ -988,11 +988,19 @@ static bool _kmstest_connector_config(int drm_fd, uint32_t connector_id,
 	}
 
 	/* First, find the connector & mode */
-	if (probe)
+	if (probe > 0)
 		connector = drmModeGetConnector(drm_fd, connector_id);
-	else
+	else {
 		connector = drmModeGetConnectorCurrent(drm_fd, connector_id);
 
+		if (probe < 0 && connector &&
+		    connector->connection == DRM_MODE_UNKNOWNCONNECTION) {
+			drmModeFreeConnector(connector);
+
+			connector = drmModeGetConnector(drm_fd, connector_id);
+		}
+	}
+
 	if (!connector)
 		goto err2;
 

@@ -2028,7 +2036,8 @@ void igt_display_init(igt_display_t *display, int drm_fd)
 		 * We don't assign each output a pipe unless
 		 * a pipe is set with igt_output_set_pipe().
 		 */
-		output->force_reprobe = true;
+		output->force_reprobe = -1;
+		output->pending_pipe = PIPE_NONE;
 		output->id = resources->connectors[i];
 		output->display = display;
lib/igt_kms.h +1 -1
index 6f16dc8cf85e..9e734ab1a5b8 100644
@@ -340,7 +340,7 @@ typedef struct {
 	uint32_t id;					/* KMS id */
 	struct kmstest_connector_config config;
 	char *name;
-	bool force_reprobe;
+	int force_reprobe;
 	enum pipe pending_pipe;
 	bool use_override_mode;
 	drmModeModeInfo override_mode;
Signature · 6 lines
2.16.3

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
#3 lore raw
Quoted 62 lines · Maarten Lankhorst

Only do a full probe when the initial connector status is unknown, and otherwise skip it. This should speed up kms tests ever so slightly.

Also set pipe to PIPE_NONE for igt_output_refresh(), to make the connector info slightly more accurate.

Signed-off-by Maarten Lankhorst <[email protected]>
---
 lib/igt_kms.c | 17 +++++++++++++----
 lib/igt_kms.h |  2 +-
 2 files changed, 14 insertions(+), 5 deletions(-)
lib/igt_kms.c +13 -4
index d8f69d3db9ca..f47c32a79222 100644
@@ -974,7 +974,7 @@ _kmstest_connector_config_find_encoder(int drm_fd, drmModeConnector *connector,
 static bool _kmstest_connector_config(int drm_fd, uint32_t connector_id,
 				      unsigned long crtc_idx_mask,
 				      struct kmstest_connector_config *config,
-				      bool probe)
+				      int probe)
 {
 	drmModeRes *resources;
 	drmModeConnector *connector;

@@ -988,11 +988,19 @@ static bool _kmstest_connector_config(int drm_fd, uint32_t connector_id,
 	}
 
 	/* First, find the connector & mode */
-	if (probe)
+	if (probe > 0)
 		connector = drmModeGetConnector(drm_fd, connector_id);
-	else
+	else {
 		connector = drmModeGetConnectorCurrent(drm_fd, connector_id);
 
+		if (probe < 0 && connector &&
+		    connector->connection == DRM_MODE_UNKNOWNCONNECTION) {
+			drmModeFreeConnector(connector);
+
+			connector = drmModeGetConnector(drm_fd, connector_id);
+		}
+	}
+
 	if (!connector)
 		goto err2;
 

@@ -2028,7 +2036,8 @@ void igt_display_init(igt_display_t *display, int drm_fd)
 		 * We don't assign each output a pipe unless
 		 * a pipe is set with igt_output_set_pipe().
 		 */
-		output->force_reprobe = true;
+		output->force_reprobe = -1;
+		output->pending_pipe = PIPE_NONE;
 		output->id = resources->connectors[i];
 		output->display = display;
lib/igt_kms.h +0 -0
index 6f16dc8cf85e..9e734ab1a5b8 100644

lib/igt_kms.h typedef struct { · line 343

Quoted 5 lines
lib/igt_kms.h +1 -1
@@ -340,7 +340,7 @@ typedef struct {
 	uint32_t id;					/* KMS id */
 	struct kmstest_connector_config config;
 	char *name;
-	bool force_reprobe;
+	int force_reprobe;

I am all for doing full probe only when requested or necessary, but I find keeping the name 'force_reprobe' and mixing -1, false and true rather confusing.

What about changing the name to just "reprobe" and use enum values NO_REPROBE, FORCE_REPROBE and IF_NECESSARY_REPROBE (or some better names)?

-Arek

Quoted 10 lines
lib/igt_kms.h +0 -0
 	enum pipe pending_pipe;
 	bool use_override_mode;
 	drmModeModeInfo override_mode;
Signature · 6 lines
2.16.3

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

author
#4 lore raw

PATCH 1/1 lib/igt_kms: Improve connector probing in igt_display_init(), v2.

Only do a full probe when the initial connector status is unknown, and otherwise skip it. This should speed up kms tests ever so slightly.

Also set pipe to PIPE_NONE for igt_output_refresh(), to make the connector info slightly more accurate.

Changes since v1:
- Instead of a force_reprobe tristate, only force reprobe from igt_display_init() when an unknown connection is found.

Signed-off-by Maarten Lankhorst <[email protected]>
Cc Arkadiusz Hiler <[email protected]>
---
 lib/igt_kms.c | 8 +++++++-
 1 file changed, 7 insertions(+), 1 deletion(-)
lib/igt_kms.c +7 -1
index 2b81cabb05d8..19d650a8dcf8 100644
@@ -1955,11 +1955,17 @@ void igt_display_init(igt_display_t *display, int drm_fd)
 		 * We don't assign each output a pipe unless
 		 * a pipe is set with igt_output_set_pipe().
 		 */
-		output->force_reprobe = true;
+		output->pending_pipe = PIPE_NONE;
 		output->id = resources->connectors[i];
 		output->display = display;
 
 		igt_output_refresh(output);
+
+		if (output->config.connector &&
+		    output->config.connector->connection == DRM_MODE_UNKNOWNCONNECTION) {
+			output->force_reprobe = true;
+			igt_output_refresh(output);
+		}
 	}
 
 	drmModeFreePlaneResources(plane_resources);
Signature · 6 lines
2.16.3

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev
Reviewed-by on v1 1/1
#5 lore raw

Re: [igt-dev] [PATCH i-g-t] lib/igt_kms: Improve connector probing in igt_display_init(), v2.

Quoted 6 lines · Maarten Lankhorst

Only do a full probe when the initial connector status is unknown, and otherwise skip it. This should speed up kms tests ever so slightly.

Also set pipe to PIPE_NONE for igt_output_refresh(), to make the connector info slightly more accurate.

Quoted 6 lines

Changes since v1:
- Instead of a force_reprobe tristate, only force reprobe from igt_display_init() when an unknown connection is found.

Signed-off-by Maarten Lankhorst <[email protected]>
Cc Arkadiusz Hiler <[email protected]>
Reviewed-by Arkadiusz Hiler <[email protected]>

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

author
#6 lore raw

Re: [igt-dev] [PATCH i-g-t] lib/igt_kms: Improve connector probing in igt_display_init(), v2.

Op 28-03-18 om 11:20 schreef Arkadiusz Hiler:

Quoted 7 lines · Maarten Lankhorst
Quoted 6 lines

Only do a full probe when the initial connector status is unknown, and otherwise skip it. This should speed up kms tests ever so slightly.

Also set pipe to PIPE_NONE for igt_output_refresh(), to make the connector info slightly more accurate.

Quoted 7 lines
Quoted 6 lines

Changes since v1:
- Instead of a force_reprobe tristate, only force reprobe from igt_display_init() when an unknown connection is found.

Signed-off-by Maarten Lankhorst <[email protected]>
Cc Arkadiusz Hiler <[email protected]>
Reviewed-by Arkadiusz Hiler <[email protected]>

Thanks, pushed. :)

_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

CI
#7 lore raw

[igt-dev] ✓ Fi.CI.BAT: success for lib/igt_kms: Improve connector probing in igt_display_init() (rev2)

In reply to Patchwork
== Series Details ==

== Series Details ==

Series: lib/igt_kms: Improve connector probing in igt_display_init() (rev2)
URL : https://patchwork.freedesktop.org/series/40660/
State : success

== Summary ==

IGT patchset tested on top of latest successful build a9741da52ad1963f7632ef1e852cbe1c3bcc601e tests/perf_pmu: Improve accuracy by waiting on spinner to start

with latest DRM-Tip kernel build CI_DRM_3978
94f5d9189e61 drm-tip: 2018y-03m-23d-23h-41m-40s UTC integration manifest

No testlist changes.

---- Known issues:

Test gem_mmap_gtt:

        Subgroup basic-small-bo-tiledx:
                pass       -> FAIL       (fi-gdg-551) fdo#102575
Test kms_pipe_crc_basic:
        Subgroup suspend-read-crc-pipe-c:
                incomplete -> PASS       (fi-bxt-dsi) fdo#103927
                incomplete -> PASS       (fi-hsw-4770) fdo#104944

fdo#102575 https://bugs.freedesktop.org/show_bug.cgi?id=102575
fdo#103927 https://bugs.freedesktop.org/show_bug.cgi?id=103927
fdo#104944 https://bugs.freedesktop.org/show_bug.cgi?id=104944

fi-bdw-5557u     total:285  pass:264  dwarn:0   dfail:0   fail:0   skip:21  time:430s
fi-bdw-gvtdvm    total:285  pass:261  dwarn:0   dfail:0   fail:0   skip:24  time:442s
fi-blb-e6850     total:285  pass:220  dwarn:1   dfail:0   fail:0   skip:64  time:383s
fi-bsw-n3050     total:285  pass:239  dwarn:0   dfail:0   fail:0   skip:46  time:530s
fi-bwr-2160      total:285  pass:180  dwarn:0   dfail:0   fail:0   skip:105 time:296s
fi-bxt-dsi       total:285  pass:255  dwarn:0   dfail:0   fail:0   skip:30  time:516s
fi-bxt-j4205     total:285  pass:256  dwarn:0   dfail:0   fail:0   skip:29  time:513s
fi-byt-j1900     total:285  pass:250  dwarn:0   dfail:0   fail:0   skip:35  time:519s
fi-byt-n2820     total:285  pass:246  dwarn:0   dfail:0   fail:0   skip:39  time:507s
fi-cfl-8700k     total:285  pass:257  dwarn:0   dfail:0   fail:0   skip:28  time:407s
fi-cfl-u         total:285  pass:259  dwarn:0   dfail:0   fail:0   skip:26  time:509s
fi-elk-e7500     total:285  pass:225  dwarn:1   dfail:0   fail:0   skip:59  time:424s
fi-gdg-551       total:285  pass:176  dwarn:0   dfail:0   fail:1   skip:108 time:309s
fi-glk-1         total:285  pass:257  dwarn:0   dfail:0   fail:0   skip:28  time:540s
fi-hsw-4770      total:285  pass:258  dwarn:0   dfail:0   fail:0   skip:27  time:403s
fi-ilk-650       total:285  pass:225  dwarn:0   dfail:0   fail:0   skip:60  time:422s
fi-ivb-3520m     total:285  pass:256  dwarn:0   dfail:0   fail:0   skip:29  time:468s
fi-ivb-3770      total:285  pass:252  dwarn:0   dfail:0   fail:0   skip:33  time:429s
fi-kbl-7500u     total:285  pass:260  dwarn:1   dfail:0   fail:0   skip:24  time:474s
fi-kbl-7567u     total:285  pass:265  dwarn:0   dfail:0   fail:0   skip:20  time:459s
fi-kbl-r         total:285  pass:258  dwarn:0   dfail:0   fail:0   skip:27  time:511s
fi-pnv-d510      total:285  pass:219  dwarn:1   dfail:0   fail:0   skip:65  time:649s
fi-skl-6260u     total:285  pass:265  dwarn:0   dfail:0   fail:0   skip:20  time:439s
fi-skl-6600u     total:285  pass:258  dwarn:0   dfail:0   fail:0   skip:27  time:531s
fi-skl-6700k2    total:285  pass:261  dwarn:0   dfail:0   fail:0   skip:24  time:508s
fi-skl-6770hq    total:285  pass:265  dwarn:0   dfail:0   fail:0   skip:20  time:503s
fi-skl-guc       total:285  pass:257  dwarn:0   dfail:0   fail:0   skip:28  time:428s
fi-skl-gvtdvm    total:285  pass:262  dwarn:0   dfail:0   fail:0   skip:23  time:444s
fi-snb-2520m     total:285  pass:245  dwarn:0   dfail:0   fail:0   skip:40  time:585s
fi-snb-2600      total:285  pass:245  dwarn:0   dfail:0   fail:0   skip:40  time:398s
Blacklisted hosts:
fi-cfl-s3        total:285  pass:258  dwarn:0   dfail:0   fail:1   skip:26  time:558s
fi-cnl-psr       total:224  pass:198  dwarn:0   dfail:0   fail:1   skip:24 
fi-glk-j4005     total:285  pass:256  dwarn:0   dfail:0   fail:0   skip:29  time:497s

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_1192/issues.html
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

CI
#8 lore raw

[igt-dev] ✓ Fi.CI.IGT: success for lib/igt_kms: Improve connector probing in igt_display_init() (rev2)

In reply to Patchwork
== Series Details ==

== Series Details ==

Series: lib/igt_kms: Improve connector probing in igt_display_init() (rev2)
URL : https://patchwork.freedesktop.org/series/40660/
State : success

== Summary ==

---- Known issues:

Test kms_cursor_legacy:

        Subgroup 2x-long-flip-vs-cursor-atomic:
                pass       -> FAIL       (shard-hsw) fdo#104873
Test kms_flip:
        Subgroup 2x-dpms-vs-vblank-race:
                fail       -> PASS       (shard-hsw) fdo#103060 +2
        Subgroup 2x-flip-vs-expired-vblank-interruptible:
                fail       -> PASS       (shard-hsw) fdo#102887
        Subgroup basic-flip-vs-wf_vblank:
                pass       -> FAIL       (shard-hsw) fdo#100368 +1
Test kms_rotation_crc:
        Subgroup sprite-rotation-180:
                fail       -> PASS       (shard-snb) fdo#103925 +1
Test kms_setmode:
        Subgroup basic:
                pass       -> FAIL       (shard-apl) fdo#99912

fdo#104873 https://bugs.freedesktop.org/show_bug.cgi?id=104873
fdo#103060 https://bugs.freedesktop.org/show_bug.cgi?id=103060
fdo#102887 https://bugs.freedesktop.org/show_bug.cgi?id=102887
fdo#100368 https://bugs.freedesktop.org/show_bug.cgi?id=100368
fdo#103925 https://bugs.freedesktop.org/show_bug.cgi?id=103925
fdo#99912 https://bugs.freedesktop.org/show_bug.cgi?id=99912

shard-apl        total:3495 pass:1831 dwarn:1   dfail:0   fail:7   skip:1655 time:12783s
shard-hsw        total:3495 pass:1781 dwarn:1   dfail:0   fail:3   skip:1709 time:11560s
shard-snb        total:3495 pass:1373 dwarn:1   dfail:0   fail:4   skip:2117 time:6906s

Blacklisted hosts:
shard-kbl total:3423 pass:1908 dwarn:1 dfail:0 fail:9 skip:1504 time:9048s

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_1192/shards.html
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

CI
#9 lore raw

[igt-dev] ✓ Fi.CI.BAT: success for lib/igt_kms: Improve connector probing in igt_display_init() (rev3)

In reply to Patchwork
== Series Details ==

== Series Details ==

Series: lib/igt_kms: Improve connector probing in igt_display_init() (rev3)
URL : https://patchwork.freedesktop.org/series/40660/
State : success

== Summary ==

IGT patchset tested on top of latest successful build 0a393229479d61829a2f8671c1a46f533c76b385 igt/gem_ctx_isolation: Reset a scratch context

with latest DRM-Tip kernel build CI_DRM_3994
23c67dc0cf31 drm-tip: 2018y-03m-28d-06h-36m-40s UTC integration manifest

No testlist changes.

---- Known issues:

Test drv_module_reload:

        Subgroup basic-reload-inject:
                pass       -> INCOMPLETE (fi-cnl-y3) fdo#105777
Test gem_mmap_gtt:
        Subgroup basic-small-bo-tiledx:
                pass       -> FAIL       (fi-gdg-551) fdo#102575
Test kms_pipe_crc_basic:
        Subgroup suspend-read-crc-pipe-c:
                pass       -> INCOMPLETE (fi-bxt-dsi) fdo#103927
                pass       -> DMESG-FAIL (fi-cnl-y3) fdo#104951
Test prime_vgem:
        Subgroup basic-fence-flip:
                pass       -> FAIL       (fi-ilk-650) fdo#104008

fdo#105777 https://bugs.freedesktop.org/show_bug.cgi?id=105777
fdo#102575 https://bugs.freedesktop.org/show_bug.cgi?id=102575
fdo#103927 https://bugs.freedesktop.org/show_bug.cgi?id=103927
fdo#104951 https://bugs.freedesktop.org/show_bug.cgi?id=104951
fdo#104008 https://bugs.freedesktop.org/show_bug.cgi?id=104008

fi-bdw-5557u     total:285  pass:264  dwarn:0   dfail:0   fail:0   skip:21  time:430s
fi-bdw-gvtdvm    total:285  pass:261  dwarn:0   dfail:0   fail:0   skip:24  time:444s
fi-blb-e6850     total:285  pass:220  dwarn:1   dfail:0   fail:0   skip:64  time:387s
fi-bsw-n3050     total:285  pass:239  dwarn:0   dfail:0   fail:0   skip:46  time:542s
fi-bwr-2160      total:285  pass:180  dwarn:0   dfail:0   fail:0   skip:105 time:295s
fi-bxt-dsi       total:243  pass:216  dwarn:0   dfail:0   fail:0   skip:26 
fi-bxt-j4205     total:285  pass:256  dwarn:0   dfail:0   fail:0   skip:29  time:514s
fi-byt-j1900     total:285  pass:250  dwarn:0   dfail:0   fail:0   skip:35  time:521s
fi-byt-n2820     total:285  pass:246  dwarn:0   dfail:0   fail:0   skip:39  time:507s
fi-cfl-8700k     total:285  pass:257  dwarn:0   dfail:0   fail:0   skip:28  time:411s
fi-cfl-s3        total:285  pass:259  dwarn:0   dfail:0   fail:0   skip:26  time:560s
fi-cfl-u         total:285  pass:259  dwarn:0   dfail:0   fail:0   skip:26  time:515s
fi-cnl-y3        total:284  pass:257  dwarn:0   dfail:1   fail:0   skip:25 
fi-elk-e7500     total:285  pass:225  dwarn:1   dfail:0   fail:0   skip:59  time:418s
fi-gdg-551       total:285  pass:176  dwarn:0   dfail:0   fail:1   skip:108 time:315s
fi-glk-1         total:285  pass:257  dwarn:0   dfail:0   fail:0   skip:28  time:540s
fi-hsw-4770      total:285  pass:258  dwarn:0   dfail:0   fail:0   skip:27  time:404s
fi-ilk-650       total:285  pass:224  dwarn:0   dfail:0   fail:1   skip:60  time:422s
fi-ivb-3520m     total:285  pass:256  dwarn:0   dfail:0   fail:0   skip:29  time:476s
fi-ivb-3770      total:285  pass:252  dwarn:0   dfail:0   fail:0   skip:33  time:431s
fi-kbl-7500u     total:285  pass:260  dwarn:1   dfail:0   fail:0   skip:24  time:471s
fi-kbl-7567u     total:285  pass:265  dwarn:0   dfail:0   fail:0   skip:20  time:463s
fi-kbl-r         total:285  pass:258  dwarn:0   dfail:0   fail:0   skip:27  time:509s
fi-pnv-d510      total:285  pass:219  dwarn:1   dfail:0   fail:0   skip:65  time:657s
fi-skl-6260u     total:285  pass:265  dwarn:0   dfail:0   fail:0   skip:20  time:443s
fi-skl-6600u     total:285  pass:258  dwarn:0   dfail:0   fail:0   skip:27  time:534s
fi-skl-6700k2    total:285  pass:261  dwarn:0   dfail:0   fail:0   skip:24  time:497s
fi-skl-6770hq    total:285  pass:265  dwarn:0   dfail:0   fail:0   skip:20  time:503s
fi-skl-guc       total:285  pass:257  dwarn:0   dfail:0   fail:0   skip:28  time:429s
fi-skl-gvtdvm    total:285  pass:262  dwarn:0   dfail:0   fail:0   skip:23  time:452s
fi-snb-2520m     total:285  pass:245  dwarn:0   dfail:0   fail:0   skip:40  time:562s
Blacklisted hosts:
fi-cnl-psr       total:285  pass:256  dwarn:3   dfail:0   fail:0   skip:26  time:514s
fi-glk-j4005     total:285  pass:256  dwarn:0   dfail:0   fail:0   skip:29  time:486s

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_1201/issues.html
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev

CI
#10 lore raw

[igt-dev] ✓ Fi.CI.IGT: success for lib/igt_kms: Improve connector probing in igt_display_init() (rev3)

In reply to Patchwork
== Series Details ==

== Series Details ==

Series: lib/igt_kms: Improve connector probing in igt_display_init() (rev3)
URL : https://patchwork.freedesktop.org/series/40660/
State : success

== Summary ==

---- Known issues:

Test drv_hangman:

        Subgroup error-state-capture-blt:
                pass       -> DMESG-WARN (shard-snb) fdo#104058
Test kms_flip:
        Subgroup 2x-plain-flip-ts-check-interruptible:
                fail       -> PASS       (shard-hsw) fdo#100368 +2
Test kms_plane_multiple:
        Subgroup atomic-pipe-a-tiling-x:
                fail       -> PASS       (shard-snb) fdo#103166
Test kms_rotation_crc:
        Subgroup sprite-rotation-180:
                pass       -> FAIL       (shard-snb) fdo#103925 +1
Test kms_setmode:
        Subgroup basic:
                pass       -> FAIL       (shard-hsw) fdo#99912 +1
Test kms_sysfs_edid_timing:
                warn       -> PASS       (shard-apl) fdo#100047

fdo#104058 https://bugs.freedesktop.org/show_bug.cgi?id=104058
fdo#100368 https://bugs.freedesktop.org/show_bug.cgi?id=100368
fdo#103166 https://bugs.freedesktop.org/show_bug.cgi?id=103166
fdo#103925 https://bugs.freedesktop.org/show_bug.cgi?id=103925
fdo#99912 https://bugs.freedesktop.org/show_bug.cgi?id=99912
fdo#100047 https://bugs.freedesktop.org/show_bug.cgi?id=100047

shard-apl        total:3495 pass:1833 dwarn:1   dfail:0   fail:6   skip:1655 time:12997s
shard-hsw        total:3495 pass:1782 dwarn:1   dfail:0   fail:2   skip:1709 time:11425s
shard-snb        total:3495 pass:1373 dwarn:2   dfail:0   fail:3   skip:2117 time:6983s

Blacklisted hosts:
shard-kbl total:3495 pass:1948 dwarn:8 dfail:0 fail:9 skip:1530 time:9337s

== Logs ==

For more details see: https://intel-gfx-ci.01.org/tree/drm-tip/IGTPW_1201/shards.html
_______________________________________________
igt-dev mailing list
[email protected]
https://lists.freedesktop.org/mailman/listinfo/igt-dev