do_IRQ: 0.83/0.84 No irq handler for vector
Hello list.
Kernel 2.6.26 (on x86-64) gives "do_IRQ: 0.83 No irq handler for vector" (and "do_IRQ: 0.83", but less often) warnings periodically. It seems that the kernel's Radeon DRM driver is at fault, or at least involved (no warnings on a kernel without Radeon DRM). The hardware in question is an R580 chip (AFAIK, R500 support was introduced with 2.6.26).
The "do_IRQ: 0.83" warning is 100% reproducible when switching from X (xf86-video-ati 6.9.0) to a console (vesafb):
[drm] Setting GART location based on new memory map [drm] Loading R500 Microcode
[drm] Num pipes: 4
[drm] writeback test succeeded in 1 usecs
do_IRQ: 0.83 No irq handler for vector
do_IRQ: 0.83 No irq handler for vector
do_IRQ: 0.83 No irq handler for vector
When enabling 3D (compiz fusion) this happens:
do_IRQ: 0.83 No irq handler for vector
do_IRQ: 0.83 No irq handler for vector
[repeated 8 more times]
__ratelimit: 5 messages suppressed
do_IRQ: 0.83 No irq handler for vector
do_IRQ: 0.83 No irq handler for vector
Some apps (glxgears) report the following when they try to do vertical synchronization (vblank_mode 1):
do_wait: drmWaitVBlank returned -1, IRQs don't seem to be working correctly.
(the result is that vsync doesn't work as intended and rendering speed gets locked at exactly 0.333 FPS).
Of course I filed a bug on X.Org's bugzilla first (http://bugs.freedesktop.org/show_bug.cgi?id=16850), but it is not clear what exactly this warning means and I'm not sure if it's a problem with the kernel's DRM driver or with X.Org (or both.)
Quoted 3 lines · Nikos Chantziaras
Hello list.
Kernel 2.6.26 (on x86-64) gives "
do_IRQ: 0.83 No irq handler for vector" (and "do_IRQ: 0.83", but less often) warnings periodically. It seems that the kernel's Radeon DRM driver is at fault, or at least involved (no warnings on a kernel without Radeon DRM).
Sorry, I'll take that back. It does happen even when compiling completely without DRM, so it's probably not related to DRM at all.
Quoted 1 line · Nikos Chantziaras
Kernel 2.6.26 (on x86-64) gives "
do_IRQ: 0.83 No irq handler for vector" (and "do_IRQ: 0.83", but less often) warnings periodically.
I changed the kernel config:
- CONFIG_PCI_MSI=y
+ # CONFIG_PCI_MSI is not set
In other words I disabled Message Signaled Interrupt support. Now instead of "do_IRQ: 0.83 No irq handler for vector" I get:
+------ PCI-Express Device Error ------+ Error Severity : Uncorrected (Non-Fatal) PCIE Bus Error type : Transaction Layer Flow Control Protocol : First Receiver ID : 0010
VendorID=1106h, DeviceID=a208h, Bus=00h, Device=02h, Function=00h Broadcast error_detected message
Broadcast mmio_enabled message
Broadcast resume message
AER driver successfully recovered
(Repeated as many times as the "do_IRQ" message previously.)
In case someone needs it, this is my complete dmesg:
http://realnc.pastebin.com/d6534029
and this is the kernel configuration: http://bugs.freedesktop.org/attachment.cgi?id=17912